summaryrefslogtreecommitdiff
path: root/Documentation/devicetree/bindings/iio/st-sensors.txt
AgeCommit message (Collapse)Author
2020-11-25dt-bindings:iio:st,st-sensors: txt to yaml conversion.Jonathan Cameron
This binding document covers a very large number of different sensors. As such the existing documentation is less specific than it could be (such as which devices have 2 interrupt pin options). That can be improved later. Denis, are you happy to be listed as maintainer for this one? If not feel free to suggestion someone else. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Rob Herring <robh@kernel.org> Acked-by: Denis Ciocca <denis.ciocca@st.com> Cc: Denis Ciocca <denis.ciocca@st.com> Link: https://lore.kernel.org/r/20201031184854.745828-45-jic23@kernel.org
2020-04-19dt-bindings: st_sensors: add st,lis2hh12 compatible entryGaëtan André
Add LIS2HH12 compatible entry. Signed-off-by: Gaëtan André <rvlander@gaetanandre.eu> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-04-14dt-bindings: iio: accel: add LIS2DE12 sensor device bindingRobert Jones
Signed-off-by: Robert Jones <rjones@gateworks.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-02-02dt-bindings: iio: pressure: add LPS22HH bindingsLorenzo Bianconi
Fix following checkpatch warnings: WARNING: DT compatible string "st,lps22hh" appears un-documented -- check ./Documentation/devicetree/bindings/ .compatible = "st,lps22hh", WARNING: DT compatible string "st,lps22hh" appears un-documented -- check ./Documentation/devicetree/bindings/ .compatible = "st,lps22hh", Fixes: e5aab7b0d88d ("iio:st_pressure:initial lps22hh sensor support") Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-11-16iio: st-accel: add support for lis3deHeiko Stuebner
This commit add support for STMicroelectronics lis3de accelerometer. Datasheet for this device can be found here: https://www.st.com/resource/en/datasheet/lis3de.pdf Signed-off-by: Heiko Stuebner <heiko.stuebner@bq.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-11-11dt-bindings: iio: magn: add LSM9DS1 bindingsMartin Kelly
Add DT binding documentation for the LSM9DS1 magnetometer. Signed-off-by: Martin Kelly <martin@martingkelly.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2017-10-10dt-bindings: iio: accel: add LIS3DHH device bindingsLorenzo Bianconi
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@st.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2017-10-09dt-bindings: iio: accel: add LIS2DW12 sensor device bindingLorenzo Bianconi
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@st.com> Acked-by: Rob Herring <robh@kernel.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2017-09-13dt-bindings: iio: pressure: add LPS33HW and LPS35HW device bindingsLorenzo Bianconi
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@st.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2017-08-17dt-bindings: iio: magn: add LIS2MDL sensor device bindingLorenzo Bianconi
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@st.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2017-07-01dt-bindings: iio: accel: add LIS3L02DQ sensor device bindingLorenzo Bianconi
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@st.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-07-01dt-bindings: iio: gyro: add L3GD20H sensor device bindingLorenzo Bianconi
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@st.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-01-10iio: accel: st_accel: handle deprecated bindingsLinus Walleij
The earlier deployed LIS3LV02DL driver had already defined a few DT bindings that need to be supported by the new more generic driver and listed as compatible but deprecated bindings in the documentation. After this we can start to activate the new driver with the old systems where applicable. As part of this enablement: make us depend on the old drivers not being in use so we don't get a kernel with two competing drivers. Cc: devicetree@vger.kernel.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-11-01Documentation: dt: iio: accel: add lng2dm sensor device bindingLorenzo Bianconi
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@st.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-05-29iio:st_pressure:initial lps22hb sensor supportGregor Boirie
Initial support for ST LPS22HB pressure sensor. Datasheet: http://www2.st.com/resource/en/datasheet/lps22hb.pdf Features: * pressure data and timestamping channels * sampling frequency selection * interrupt based trigger * over I2C or SPI Signed-off-by: Gregor Boirie <gregor.boirie@parrot.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-04-23iio: st_gyro: Add lsm9ds0-gyro supportCrestez Dan Leonard
This device has an identical interface to other supported sensors and the patch only adds IDs. Signed-off-by: Crestez Dan Leonard <leonard.crestez@intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-04-19iio: st_sensors: support open drain modeLinus Walleij
Some types of ST Sensors can be connected to the same IRQ line as other peripherals using open drain. Add a device tree binding and a sensor data property to flip the right bit in the interrupt control register to enable open drain mode on the INT line. If the line is set to be open drain, also tag on IRQF_SHARED to the IRQ flags when requesting the interrupt, as the whole point of using open drain interrupt lines is to share them with more than one peripheral (wire-or). Cc: devicetree@vger.kernel.org Cc: Giuseppe Barba <giuseppe.barba@st.com> Cc: Denis Ciocca <denis.ciocca@st.com> Acked-by: Rob Herring <rob@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-03-12iio: accel: Add support for the h3lis331dl accelerometerTiberiu Breana
This commit adds support for STMicroelectronics h3lis331dl high-g accelerometer. The datasheet for this device can be found here: http://www.st.com/web/en/resource/technical/document/ datasheet/DM00053090.pdf Signed-off-by: Tiberiu Breana <tiberiu.a.breana@intel.com> Reviewed-by: Denis Ciocca <denis.ciocca@st.com> Acked-by: Denis Ciocca <denis.ciocca@st.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-11-14iio: st-accel: add support for lis2dh12Giuseppe Barba
This commit add support for STMicroelectronics lis2dh12 accelerometer. Datasheet for this device can be found here: http://www.st.com/st-web-ui/static/active/en/resource/technical/ document/datasheet/DM00091513.pdf Signed-off-by: Giuseppe Barba <giuseppe.barba@st.com> Acked-by: Denis Ciocca <denis.ciocca@st.com> Acked-by: Daniel Baluta <daniel.baluta@intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-07-23iio: st-magn: add support for lsm303agr magnetometerGiuseppe Barba
This adds support for the lsm303agr magnetometer. Signed-off-by: Giuseppe Barba <giuseppe.barba@st.com> Acked-by: Denis Ciocca <denis.ciocca@st.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-07-23iio: st-accel: add support for lsm303agr accelerometerGiuseppe Barba
This adds support for the lsm303agr accelerometer. Signed-off-by: Giuseppe Barba <giuseppe.barba@st.com> Acked-by: Denis Ciocca <denis.ciocca@st.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-06-08iio: st_accel: support the LIS331DL sensorLinus Walleij
This adds support for the LIS331DL sensor version. This is a simple 8bit-only accelerometer. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Denis Ciocca <denis.ciocca@st.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-05-07iio: magnetometer: support for lsm303dlhLinus Walleij
The LSM303DLH accelerometer/magnetometer has a different device identification method than using register 0x0f, instead three registers contain a magic value. We rely on WhoAmI to be zero for this variant. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-03-28iio: st-sensors: add support for lis3lv02d accelerometerLinus Walleij
This adds support for the LIS3LV02 accelerometer found in the ST Microelectronics Nomadik board series. Cc: devicetree@vger.kernel.org Cc: Denis CIOCCA <denis.ciocca@st.com> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-07-07iio: st_sensors: add device tree bindingsLinus Walleij
This adds some basic, simple device tree bindings to the STMicro MEMS sensor drivers. Cc: devicetree@vger.kernel.org Cc: Lee Jones <lee.jones@linaro.org> Cc: Denis CIOCCA <denis.ciocca@st.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
generated by cgit (git 2.34.1) at 2024-05-18 14:53:35 +0000