summaryrefslogtreecommitdiff
path: root/Documentation/devicetree/bindings/net/wireless
AgeCommit message (Collapse)Author
2021-11-02Merge tag 'devicetree-for-5.16' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull devicetree updates from Rob Herring: - Convert /reserved-memory bindings to schemas - Convert a bunch of NFC bindings to schemas - Convert bindings to schema: Xilinx USB, Freescale DDR controller, Arm CCI-400, UBlox Neo-6M, 1-Wire GPIO, MSI controller, ASpeed LPC, OMAP and Inside-Secure HWRNG, register-bit-led, OV5640, Silead GSL1680, Elan ekth3000, Marvell bluetooth, TI wlcore, TI bluetooth, ESP ESP8089, tlm,trusted-foundations, Microchip cap11xx, Ralink SoCs and boards, and TI sysc - New binding schemas for: msi-ranges, Aspeed UART routing controller, palmbus, Xylon LogiCVC display controller, Mediatek's MT7621 SDRAM memory controller, and Apple M1 PCIe host - Run schema checks for %.dtb targets - Improve build time when using DT_SCHEMA_FILES - Improve error message when dtschema is not found - Various doc reference fixes in MAINTAINERS - Convert architectures to common CPU h/w ID parsing function of_get_cpu_hwid(). - Allow for empty NUMA node IDs which may be hotplugged - Cleanup of __fdt_scan_reserved_mem() - Constify device_node parameters - Update dtc to upstream v1.6.1-19-g0a3a9d3449c8. Adds new checks 'node_name_vs_property_name' and 'interrupt_map'. - Enable dtc 'unit_address_format' warning by default - Fix unittest EXPECT text for gpio hog errors * tag 'devicetree-for-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (97 commits) dt-bindings: net: ti,bluetooth: Document default max-speed dt-bindings: pci: rcar-pci-ep: Document r8a7795 dt-bindings: net: qcom,ipa: IPA does support up to two iommus of/fdt: Remove of_scan_flat_dt() usage for __fdt_scan_reserved_mem() of: unittest: document intentional interrupt-map provider build warning of: unittest: fix EXPECT text for gpio hog errors of/unittest: Disable new dtc node_name_vs_property_name and interrupt_map warnings scripts/dtc: Update to upstream version v1.6.1-19-g0a3a9d3449c8 dt-bindings: arm: firmware: tlm,trusted-foundations: Convert txt bindings to yaml dt-bindings: display: tilcd: Fix endpoint addressing in example dt-bindings: input: microchip,cap11xx: Convert txt bindings to yaml dt-bindings: ufs: exynos-ufs: add exynosautov9 compatible dt-bindings: ufs: exynos-ufs: add io-coherency property dt-bindings: mips: convert Ralink SoCs and boards to schema dt-bindings: display: xilinx: Fix example with psgtr dt-bindings: net: nfc: nxp,pn544: Convert txt bindings to yaml dt-bindings: Add a help message when dtschema tools are missing dt-bindings: bus: ti-sysc: Update to use yaml binding dt-bindings: sram: Allow numbers in sram region node name dt-bindings: display: Document the Xylon LogiCVC display controller ...
2021-10-20Merge tag 'mt76-for-kvalo-2021-10-20' of https://github.com/nbd168/wirelessKalle Valo
mt76 patches for 5.16 * various bugfixes * endian fixes * mt7921 aspm support * cleanup * mt7921 testmode support * rate handling fixes * tx status fixes/improvements * mt7921 power management improvements * mt7915 LED support * DBDC fixes * mt7921 6GHz support * support for eeprom data in DT * mt7915 TWT support * mt7915 txbf + MU-MIMO improvements # gpg: Signature made Wed 20 Oct 2021 12:24:46 PM EEST # gpg: using DSA key D77D141D02A76EF5 # gpg: Good signature from "Felix Fietkau <nbd@nbd.name>" [unknown] # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: 75D1 1A7D 91A7 710F 4900 42EF D77D 141D 02A7 6EF5
2021-10-20dt-bindings: net: wireless: ti,wlcore: Convert to json-schemaGeert Uytterhoeven
The Texas Instruments Wilink 6/7/8 (wl12xx/wl18xx) Wireless LAN Controllers can be connected via SPI or via SDIO. Convert the two Device Tree binding documents to json-schema, and merge them into a single document. Add missing ti,wl1285 compatible value. Add missing interrupt-names property. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/23a2fbc46255a988e5d36f6c14abb7130480d200.1634646975.git.geert+renesas@glider.be Signed-off-by: Rob Herring <robh@kernel.org>
2021-10-20dt: bindings: net: mt76: add eeprom-data propertyDaniel Golle
EEPROM data for mt76 can be embedded into device-tree as an array. Signed-off-by: Daniel Golle <daniel@makrotopia.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-10-12dt-bindings: net: wireless: Convert ESP ESP8089 binding to a schemaMaxime Ripard
The ESP8089 Wireless Chip is supported by Linux (through an out-of-tree driver) thanks to its device tree binding. Now that we have the DT validation in place, let's convert the device tree bindings for that driver over to a YAML schema. Cc: "David S. Miller" <davem@davemloft.net> Cc: de Goede <hdegoede@redhat.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20210924072756.869731-4-maxime@cerno.tech
2021-10-05dt-bindings: net: wireless: qca,ath9k: convert to the json-schemaChristian Lamparter
This replaces the existing .txt binding file. Furthermore, this also helps with validating DTS files. Introduced binding changes: 1. added inherited mac-address nvmem property 2. added inherited ieee80211-freq-limit property 3. added new calibration nvmem property 4. added second example (taken from the Netgear WNDR3700v2) Reason: Setting qca,no-eeprom; takes presedence over nvmem-cells. I think a different example is needed, because the driver can only reads from one calibration source per device. 5. (re-added) chip list (based on data from ath9k's pci.c) Added binding .yaml to MAINTAINERS. Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210924223509.52525-1-chunkeey@gmail.com
2021-04-29Merge tag 'net-next-5.13' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - bpf: - allow bpf programs calling kernel functions (initially to reuse TCP congestion control implementations) - enable task local storage for tracing programs - remove the need to store per-task state in hash maps, and allow tracing programs access to task local storage previously added for BPF_LSM - add bpf_for_each_map_elem() helper, allowing programs to walk all map elements in a more robust and easier to verify fashion - sockmap: support UDP and cross-protocol BPF_SK_SKB_VERDICT redirection - lpm: add support for batched ops in LPM trie - add BTF_KIND_FLOAT support - mostly to allow use of BTF on s390 which has floats in its headers files - improve BPF syscall documentation and extend the use of kdoc parsing scripts we already employ for bpf-helpers - libbpf, bpftool: support static linking of BPF ELF files - improve support for encapsulation of L2 packets - xdp: restructure redirect actions to avoid a runtime lookup, improving performance by 4-8% in microbenchmarks - xsk: build skb by page (aka generic zerocopy xmit) - improve performance of software AF_XDP path by 33% for devices which don't need headers in the linear skb part (e.g. virtio) - nexthop: resilient next-hop groups - improve path stability on next-hops group changes (incl. offload for mlxsw) - ipv6: segment routing: add support for IPv4 decapsulation - icmp: add support for RFC 8335 extended PROBE messages - inet: use bigger hash table for IP ID generation - tcp: deal better with delayed TX completions - make sure we don't give up on fast TCP retransmissions only because driver is slow in reporting that it completed transmitting the original - tcp: reorder tcp_congestion_ops for better cache locality - mptcp: - add sockopt support for common TCP options - add support for common TCP msg flags - include multiple address ids in RM_ADDR - add reset option support for resetting one subflow - udp: GRO L4 improvements - improve 'forward' / 'frag_list' co-existence with UDP tunnel GRO, allowing the first to take place correctly even for encapsulated UDP traffic - micro-optimize dev_gro_receive() and flow dissection, avoid retpoline overhead on VLAN and TEB GRO - use less memory for sysctls, add a new sysctl type, to allow using u8 instead of "int" and "long" and shrink networking sysctls - veth: allow GRO without XDP - this allows aggregating UDP packets before handing them off to routing, bridge, OvS, etc. - allow specifing ifindex when device is moved to another namespace - netfilter: - nft_socket: add support for cgroupsv2 - nftables: add catch-all set element - special element used to define a default action in case normal lookup missed - use net_generic infra in many modules to avoid allocating per-ns memory unnecessarily - xps: improve the xps handling to avoid potential out-of-bound accesses and use-after-free when XPS change race with other re-configuration under traffic - add a config knob to turn off per-cpu netdev refcnt to catch underflows in testing Device APIs: - add WWAN subsystem to organize the WWAN interfaces better and hopefully start driving towards more unified and vendor- independent APIs - ethtool: - add interface for reading IEEE MIB stats (incl. mlx5 and bnxt support) - allow network drivers to dump arbitrary SFP EEPROM data, current offset+length API was a poor fit for modern SFP which define EEPROM in terms of pages (incl. mlx5 support) - act_police, flow_offload: add support for packet-per-second policing (incl. offload for nfp) - psample: add additional metadata attributes like transit delay for packets sampled from switch HW (and corresponding egress and policy-based sampling in the mlxsw driver) - dsa: improve support for sandwiched LAGs with bridge and DSA - netfilter: - flowtable: use direct xmit in topologies with IP forwarding, bridging, vlans etc. - nftables: counter hardware offload support - Bluetooth: - improvements for firmware download w/ Intel devices - add support for reading AOSP vendor capabilities - add support for virtio transport driver - mac80211: - allow concurrent monitor iface and ethernet rx decap - set priority and queue mapping for injected frames - phy: add support for Clause-45 PHY Loopback - pci/iov: add sysfs MSI-X vector assignment interface to distribute MSI-X resources to VFs (incl. mlx5 support) New hardware/drivers: - dsa: mv88e6xxx: add support for Marvell mv88e6393x - 11-port Ethernet switch with 8x 1-Gigabit Ethernet and 3x 10-Gigabit interfaces. - dsa: support for legacy Broadcom tags used on BCM5325, BCM5365 and BCM63xx switches - Microchip KSZ8863 and KSZ8873; 3x 10/100Mbps Ethernet switches - ath11k: support for QCN9074 a 802.11ax device - Bluetooth: Broadcom BCM4330 and BMC4334 - phy: Marvell 88X2222 transceiver support - mdio: add BCM6368 MDIO mux bus controller - r8152: support RTL8153 and RTL8156 (USB Ethernet) chips - mana: driver for Microsoft Azure Network Adapter (MANA) - Actions Semi Owl Ethernet MAC - can: driver for ETAS ES58X CAN/USB interfaces Pure driver changes: - add XDP support to: enetc, igc, stmmac - add AF_XDP support to: stmmac - virtio: - page_to_skb() use build_skb when there's sufficient tailroom (21% improvement for 1000B UDP frames) - support XDP even without dedicated Tx queues - share the Tx queues with the stack when necessary - mlx5: - flow rules: add support for mirroring with conntrack, matching on ICMP, GTP, flex filters and more - support packet sampling with flow offloads - persist uplink representor netdev across eswitch mode changes - allow coexistence of CQE compression and HW time-stamping - add ethtool extended link error state reporting - ice, iavf: support flow filters, UDP Segmentation Offload - dpaa2-switch: - move the driver out of staging - add spanning tree (STP) support - add rx copybreak support - add tc flower hardware offload on ingress traffic - ionic: - implement Rx page reuse - support HW PTP time-stamping - octeon: support TC hardware offloads - flower matching on ingress and egress ratelimitting. - stmmac: - add RX frame steering based on VLAN priority in tc flower - support frame preemption (FPE) - intel: add cross time-stamping freq difference adjustment - ocelot: - support forwarding of MRP frames in HW - support multiple bridges - support PTP Sync one-step timestamping - dsa: mv88e6xxx, dpaa2-switch: offload bridge port flags like learning, flooding etc. - ipa: add IPA v4.5, v4.9 and v4.11 support (Qualcomm SDX55, SM8350, SC7280 SoCs) - mt7601u: enable TDLS support - mt76: - add support for 802.3 rx frames (mt7915/mt7615) - mt7915 flash pre-calibration support - mt7921/mt7663 runtime power management fixes" * tag 'net-next-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2451 commits) net: selftest: fix build issue if INET is disabled net: netrom: nr_in: Remove redundant assignment to ns net: tun: Remove redundant assignment to ret net: phy: marvell: add downshift support for M88E1240 net: dsa: ksz: Make reg_mib_cnt a u8 as it never exceeds 255 net/sched: act_ct: Remove redundant ct get and check icmp: standardize naming of RFC 8335 PROBE constants bpf, selftests: Update array map tests for per-cpu batched ops bpf: Add batched ops support for percpu array bpf: Implement formatted output helpers with bstr_printf seq_file: Add a seq_bprintf function sfc: adjust efx->xdp_tx_queue_count with the real number of initialized queues net:nfc:digital: Fix a double free in digital_tg_recv_dep_req net: fix a concurrency bug in l2tp_tunnel_register() net/smc: Remove redundant assignment to rc mpls: Remove redundant assignment to err llc2: Remove redundant assignment to rc net/tls: Remove redundant initialization of record rds: Remove redundant assignment to nr_sig dt-bindings: net: mdio-gpio: add compatible for microchip,mdio-smi0 ...
2021-04-21dt-bindings:net:wireless:mediatek,mt76: introduce power-limits nodeLorenzo Bianconi
Introduce power-limits node in mt76 binding in order to specify per-rate power limit values for each 802.11n/802.11ac rate Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-16dt-bindings: bcm4329-fmac: add optional brcm,ccode-mapShawn Guo
Add optional brcm,ccode-map property to support translation from ISO3166 country code to brcmfmac firmware country code and revision. The country revision is needed because the RF parameters that provide regulatory compliance are tweaked per platform/customer. So depending on the RF path tight to the chip, certain country revision needs to be specified. As such they could be seen as device specific calibration data which is a good fit into device tree. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com> Link: https://lore.kernel.org/r/20210415104728.8471-2-shawn.guo@linaro.org Signed-off-by: Rob Herring <robh@kernel.org>
2021-04-12dt-bindings:net:wireless:mediatek,mt76: txt to yaml conversionLorenzo Bianconi
Convert mt76 dts bindings from .txt to .yaml Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-12dt-bindings:net:wireless:ieee80211: txt to yaml conversionLorenzo Bianconi
Convert generic ieee80211 dts bindings from .txt to .yaml Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-03-24dt-bindings: Convert the BCM4329 bindings to YAML and extendLinus Walleij
This converts the BCM4329 family bindings to YAML schema, and extends and fixes the bindings like this: - Name the bindings after the first chip (BCM4329) since wildcards like 43xx are nowadays frowned upon by the DT binding reviewers. We call this the "BCM4329 family" - Add compatible strings for all the variants that seem to exist in the wild. (Derived from firmware listings.) - Support specific-to-generic compatible strings (as already in use in DTS files). - Add required reg property (SDIO function number) - Add reset-gpios property (some systems wire this to a GPIO line). - I have only listed Arend as maintainer for now, volunteers can be added. Cc: Arend van Spriel <aspriel@gmail.com> Cc: Franky Lin <franky.lin@broadcom.com> Cc: Hante Meuleman <hante.meuleman@broadcom.com> Cc: Chi-hsien Lin <chi-hsien.lin@infineon.com> Cc: Wright Feng <wright.feng@infineon.com> Cc: Chung-hsien Hsu <chung-hsien.hsu@infineon.com> Cc: Julian Calaby <julian.calaby@gmail.com> Cc: brcm80211-dev-list.pdl@broadcom.com Cc: SHA-cyfmac-dev-list@infineon.com Cc: linux-mmc@vger.kernel.org Cc: devicetree@vger.kernel.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Link: https://lore.kernel.org/r/20210315105911.138553-1-linus.walleij@linaro.org Signed-off-by: Rob Herring <robh@kernel.org>
2020-12-18dt-bindings: Fix JSON pointersRob Herring
The correct syntax for JSON pointers begins with a '/' after the '#'. Without a '/', the string should be interpreted as a subschema identifier. The jsonschema module currently doesn't handle subschema identifiers and incorrectly allows JSON pointers to begin without a '/'. Let's fix this before it becomes a problem when jsonschema module is fixed. Converted with: perl -p -i -e 's/yaml#definitions/yaml#\/definitions/g' `find Documentation/devicetree/bindings/ -name "*.yaml"` Cc: Maxime Ripard <mripard@kernel.org> Cc: Jonathan Cameron <jic23@kernel.org> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Daniel Thompson <daniel.thompson@linaro.org> Cc: Jingoo Han <jingoohan1@gmail.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Mark Brown <broonie@kernel.org> Cc: netdev@vger.kernel.org Acked-By: Vinod Koul <vkoul@kernel.org> Acked-by: Lee Jones <lee.jones@linaro.org> Acked-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Sebastian Reichel <sre@kernel.org> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Jakub Kicinski <kuba@kernel.org> Link: https://lore.kernel.org/r/20201217223429.354283-1-robh@kernel.org Signed-off-by: Rob Herring <robh@kernel.org>
2020-11-07dt: bindings: add new dt entry for ath11k calibration variantSven Eckelmann
The bus + qmi-chip-id + qmi-board-id is not enough to identify the correct board data file on IPQ6018 based devices. Multiple different boards share the same values. Only the original reference designs can currently be identified and loaded from the board-2.bin. But these will not result in the correct calibration data when combined with the pre-calibration data from the device. An additional "variant" information has to be provided to select the correct board data for a design which was modified by an ODM. This follows the same approach as ath10k. Signed-off-by: Sven Eckelmann <sven@narfation.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201015131501.1939685-1-sven@narfation.org
2020-10-15Merge tag 'net-next-5.10' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: - Add redirect_neigh() BPF packet redirect helper, allowing to limit stack traversal in common container configs and improving TCP back-pressure. Daniel reports ~10Gbps => ~15Gbps single stream TCP performance gain. - Expand netlink policy support and improve policy export to user space. (Ge)netlink core performs request validation according to declared policies. Expand the expressiveness of those policies (min/max length and bitmasks). Allow dumping policies for particular commands. This is used for feature discovery by user space (instead of kernel version parsing or trial and error). - Support IGMPv3/MLDv2 multicast listener discovery protocols in bridge. - Allow more than 255 IPv4 multicast interfaces. - Add support for Type of Service (ToS) reflection in SYN/SYN-ACK packets of TCPv6. - In Multi-patch TCP (MPTCP) support concurrent transmission of data on multiple subflows in a load balancing scenario. Enhance advertising addresses via the RM_ADDR/ADD_ADDR options. - Support SMC-Dv2 version of SMC, which enables multi-subnet deployments. - Allow more calls to same peer in RxRPC. - Support two new Controller Area Network (CAN) protocols - CAN-FD and ISO 15765-2:2016. - Add xfrm/IPsec compat layer, solving the 32bit user space on 64bit kernel problem. - Add TC actions for implementing MPLS L2 VPNs. - Improve nexthop code - e.g. handle various corner cases when nexthop objects are removed from groups better, skip unnecessary notifications and make it easier to offload nexthops into HW by converting to a blocking notifier. - Support adding and consuming TCP header options by BPF programs, opening the doors for easy experimental and deployment-specific TCP option use. - Reorganize TCP congestion control (CC) initialization to simplify life of TCP CC implemented in BPF. - Add support for shipping BPF programs with the kernel and loading them early on boot via the User Mode Driver mechanism, hence reusing all the user space infra we have. - Support sleepable BPF programs, initially targeting LSM and tracing. - Add bpf_d_path() helper for returning full path for given 'struct path'. - Make bpf_tail_call compatible with bpf-to-bpf calls. - Allow BPF programs to call map_update_elem on sockmaps. - Add BPF Type Format (BTF) support for type and enum discovery, as well as support for using BTF within the kernel itself (current use is for pretty printing structures). - Support listing and getting information about bpf_links via the bpf syscall. - Enhance kernel interfaces around NIC firmware update. Allow specifying overwrite mask to control if settings etc. are reset during update; report expected max time operation may take to users; support firmware activation without machine reboot incl. limits of how much impact reset may have (e.g. dropping link or not). - Extend ethtool configuration interface to report IEEE-standard counters, to limit the need for per-vendor logic in user space. - Adopt or extend devlink use for debug, monitoring, fw update in many drivers (dsa loop, ice, ionic, sja1105, qed, mlxsw, mv88e6xxx, dpaa2-eth). - In mlxsw expose critical and emergency SFP module temperature alarms. Refactor port buffer handling to make the defaults more suitable and support setting these values explicitly via the DCBNL interface. - Add XDP support for Intel's igb driver. - Support offloading TC flower classification and filtering rules to mscc_ocelot switches. - Add PTP support for Marvell Octeontx2 and PP2.2 hardware, as well as fixed interval period pulse generator and one-step timestamping in dpaa-eth. - Add support for various auth offloads in WiFi APs, e.g. SAE (WPA3) offload. - Add Lynx PHY/PCS MDIO module, and convert various drivers which have this HW to use it. Convert mvpp2 to split PCS. - Support Marvell Prestera 98DX3255 24-port switch ASICs, as well as 7-port Mediatek MT7531 IP. - Add initial support for QCA6390 and IPQ6018 in ath11k WiFi driver, and wcn3680 support in wcn36xx. - Improve performance for packets which don't require much offloads on recent Mellanox NICs by 20% by making multiple packets share a descriptor entry. - Move chelsio inline crypto drivers (for TLS and IPsec) from the crypto subtree to drivers/net. Move MDIO drivers out of the phy directory. - Clean up a lot of W=1 warnings, reportedly the actively developed subsections of networking drivers should now build W=1 warning free. - Make sure drivers don't use in_interrupt() to dynamically adapt their code. Convert tasklets to use new tasklet_setup API (sadly this conversion is not yet complete). * tag 'net-next-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2583 commits) Revert "bpfilter: Fix build error with CONFIG_BPFILTER_UMH" net, sockmap: Don't call bpf_prog_put() on NULL pointer bpf, selftest: Fix flaky tcp_hdr_options test when adding addr to lo bpf, sockmap: Add locking annotations to iterator netfilter: nftables: allow re-computing sctp CRC-32C in 'payload' statements net: fix pos incrementment in ipv6_route_seq_next net/smc: fix invalid return code in smcd_new_buf_create() net/smc: fix valid DMBE buffer sizes net/smc: fix use-after-free of delayed events bpfilter: Fix build error with CONFIG_BPFILTER_UMH cxgb4/ch_ipsec: Replace the module name to ch_ipsec from chcr net: sched: Fix suspicious RCU usage while accessing tcf_tunnel_info bpf: Fix register equivalence tracking. rxrpc: Fix loss of final ack on shutdown rxrpc: Fix bundle counting for exclusive connections netfilter: restore NF_INET_NUMHOOKS ibmveth: Identify ingress large send packets. ibmveth: Switch order of ibmveth_helper calls. cxgb4: handle 4-tuple PEDIT to NAT mode translation selftests: Add VRF route leaking tests ...
2020-10-06dt-bindings: Another round of adding missing 'additionalProperties'Rob Herring
Another round of wack-a-mole. The json-schema default is additional unknown properties are allowed, but for DT all properties should be defined. Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Stephen Boyd <sboyd@kernel.org> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Baolin Wang <baolin.wang7@gmail.com> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Liam Girdwood <lgirdwood@gmail.com> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-By: Vinod Koul <vkoul@kernel.org> Acked-by: Lee Jones <lee.jones@linaro.org> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # for iio Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Mark Brown <broonie@kernel.org> Reviewd-by: Corey Minyard <cminyard@mvista.com> Acked-by: Pavel Machek <pavel@ucw.cz> Acked-by: Sebastian Reichel <sre@kernel.org> Link: https://lore.kernel.org/r/20201002234143.3570746-1-robh@kernel.org Signed-off-by: Rob Herring <robh@kernel.org>
2020-09-11dt: bindings: net: update compatible for ath11kAnilkumar Kolli
Add IPQ6018 wireless driver support, its based on ath11k driver. Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/010101746cb6751a-ca300933-1174-4534-a01b-b1dbf1c1f305-000000@us-west-2.amazonses.com
2020-09-08dt: bindings: Add new regulator as optional property for WCN3990Rakesh Pillai
Add an additional regulator supply as an optional property for WCN3990. Tested-on: WCN3990 hw1.0 SNOC WLAN.HL.3.1-01040-QCAHLSWMTPLZ-1 Signed-off-by: Rakesh Pillai <pillair@codeaurora.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1593194502-13164-2-git-send-email-pillair@codeaurora.org
2020-06-26wilc1000: move wilc driver out of stagingAjay Singh
WILC1000 is an IEEE 802.11 b/g/n IoT link controller module. The WILC1000 connects to Microchip AVR/SMART MCUs, SMART MPUs, and other processors with minimal resource requirements with a simple SPI/SDIO-to-Wi-Fi interface. WILC1000 driver has been part of staging for few years. With contributions from the community, it has improved significantly. Full driver review has helped in achieving the current state. The details for those reviews are captured in 1 & 2. [1]. https://lore.kernel.org/linux-wireless/1537957525-11467-1-git-send-email-ajay.kathat@microchip.com/ [2]. https://lore.kernel.org/linux-wireless/1562896697-8002-1-git-send-email-ajay.kathat@microchip.com/ Signed-off-by: Ajay Singh <ajay.kathat@microchip.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2020-05-12dt-bindings: net: wireless: mt76: document mediatek,eeprom-merge-otp propertyFelix Fietkau
It is used to enable merging of Flash EEPROM data with OTP ROM calibration. Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-05-05dt-bindings: ath10k: Add wifi-firmware subnode for wifi nodeRakesh Pillai
Add a wifi-firmware subnode for the wifi node. This wifi-firmware subnode is needed for the targets which do not support TrustZone. Signed-off-by: Rakesh Pillai <pillair@codeaurora.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1586971906-20985-2-git-send-email-pillair@codeaurora.org
2020-03-16Merge ath-next from git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.gitKalle Valo
ath.git patches for v5.7. Major changes: ath10k * support for getting btcoex settings from Device Tree * support QCA9377 SDIO device ath11k * add HE rate accounting * add thermal sensor and cooling devices
2020-02-14dt-bindings: net: wireless: mt76: document bindings for MT7622Felix Fietkau
MT7622 is a SoC that includes a 2.4 GHz 4x4 802.11n WMAC. Its feature set is comparable to a MT7615 chip, but limited to 2.4 GHz. Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-02-14dt-bindings: net: wireless: mt76: introduce big-endian propertyLorenzo Bianconi
Introduce big-endian property to specify mtd radio partition endianness Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-02-12DTS: bindings: wl1251: mark ti,power-gpio as optionalH. Nikolaus Schaller
It is now only useful for SPI interface. Power control of SDIO mode is done through mmc core. Suggested by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2020-02-11dt-bindings: ath10k: Add new dt entries to identify coex supportTamizh Chelvam
This adds new dt entries qcom,coexist-support and qcom,coexist-gpio-pin which will be used by ath10k driver to identify coex support of a hardware and notify wifi firmware the gpio pin number. This pin number information is needed for the hardware QCA4019. Signed-off-by: Tamizh Chelvam <tamizhr@codeaurora.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2020-01-26dt: bindings: add dt entry flag to skip SCM call for msa regionGovind Singh
Add boolean context flag to disable SCM call for statically mapped msa region. Signed-off-by: Govind Singh <govinds@codeaurora.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2020-01-26ath10k: Add optional qdss clkBjorn Andersson
The WiFi firmware found on sm8150 requires that the QDSS clock is ticking in order to operate, so add an optional clock to the binding to allow this to be specified in the sm8150 dts and add the clock to the list of clocks in the driver. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-12-10Merge ath-next from git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.gitKalle Valo
ath.git patches for v5.6. Major changes: ath11k * a new driver for Qualcomm Wi-Fi 6 (IEEE 802.11ax) devices ath10k * significant improvements on receive throughput and firmware download with SDIO bus * report signal strength for each chain also on SDIO * set max mtu to 1500 on SDIO devices
2019-11-27Merge tag 'mmc-v5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmcLinus Torvalds
Pull MMC updates from Ulf Hansson: "These are the updates for MMC and MEMSTICK for v5.5. Note that this also contains quite some additional changes reaching beyond both the MMC and MEMSTICK subsystems. This is primarily because of fixing an old regression for a WiFi driver based on the SDIO interface on an OMAP openpandora board MMC core: - Add CMD13 polling for MMC IOCTLS with R1B response. - Add common DT properties for clk-phase-delays for various speed modes. - Fix size overflow for mmc gp-partitions. - Re-work HW reset for SDIO cards, which also includes a re-work for Marvell's WiFi mwifiex SDIO func driver. MMC host: - jz4740: Add support for X1000 and JZ4760. - jz4740: Add support for 8-bit bus and for low power mode. - mmci: Add support for HW busy timeout for the stm32_sdmmc variant. - owl-mmc: Add driver for Actions Semi Owl SoCs SD/MMC controller. - renesas_sdhi: Add support for r8a774b1. - sdhci_am654: Add support for Command Queuing Engine for J721E. - sdhci-milbeaut: Add driver for the Milbeaut SD controller. - sdhci-of-arasan: Add support for ZynqMP tap-delays. - sdhci-of-arasan: Add support for clk-phase-delays for SD cards. - sdhci-of-arasan: Add support for Intel LGM SDXC. - sdhci-of-aspeed: Allow inversion of the internal card detect signal. - sdhci-of-esdhc: Fixup workaround for erratum A-008171 for tunings. - sdhci-of-at91: Improve support for calibration. - sdhci-pci: Add support for Intel JSL. - sdhci-pci: Add quirk for AMD SDHC Device 0x7906. - tmio: Enable support for erase/discard/trim requests. MMC/OMAP/pandora/wl1251: The TI wl1251 WiFi driver for SDIO on the OMAP openpandora board has been broken since v4.7. To fix the problems, changes have been made cross subsystems, but also to OMAP2 machine code and to openpandora DTS files, as summarized below. Relevant changes have been tagged for stable. - mmc/wl1251: Re-introduce lost SDIO quirks and vendor-id for wl1251 - omap/omap_hsmmc: Remove redundant platform config for openpandora - omap_hsmmc: Initialize non-std SDIO card for wl1251 for pandora - omap/dts/pandora: Specify wl1251 through a child node of mmc3 - wl1251: Add devicetree support for TI wl1251 SDIO" * tag 'mmc-v5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (73 commits) dt-bindings: mmc: Correct the type of the clk phase properties Revert "mmc: tmio: remove workaround for NON_REMOVABLE" memstick: Fix Kconfig indentation mmc: sdhci-of-arasan: Add support for ZynqMP Platform Tap Delays Setup dt-bindings: mmc: arasan: Document 'xlnx,zynqmp-8.9a' controller firmware: xilinx: Add SDIO Tap Delay nodes mmc: sdhci-of-arasan: Add support to set clock phase delays for SD dt-bindings: mmc: Add optional generic properties for mmc mmc: sdhci-of-arasan: Add sampling clock for a phy to use dt-bindings: mmc: arasan: Update Documentation for the input clock mmc: sdhci-of-arasan: Separate out clk related data to another structure mmc: sdhci: Fix grammar in warning message mmc: sdhci-of-aspeed: add inversion signal presence mmc: sdhci-of-aspeed: enable CONFIG_MMC_SDHCI_IO_ACCESSORS mmc: sdhci_am654: Add Support for Command Queuing Engine to J721E mmc: core: Fix size overflow for mmc partitions mmc: tmio: Add MMC_CAP_ERASE to allow erase/discard/trim requests net: wireless: ti: remove local VENDOR_ID and DEVICE_ID definitions net: wireless: ti: wl1251 use new SDIO_VENDOR_ID_TI_WL1251 definition mmc: core: fix wl1251 sdio quirks ...
2019-11-25dt: bindings: net: add qcom,ath11k.yamlKalle Valo
ath11k is a driver for Qualcomm IEEE 802.11ax devices. Add a bindings document for the driver, first documenting IPQ8074 which is the only device ath11k currently supports. Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-15Documentation: dt: wireless: update wl1251 for sdioH. Nikolaus Schaller
The standard method for sdio devices connected to an sdio interface is to define them as a child node like we can see with wlcore. Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Acked-by: Kalle Valo <kvalo@codeaurora.org> Reviewed-by: Rob Herring <robh@kernel.org> Cc: <stable@vger.kernel.org> # v4.7+ Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-09-21dt: bindings: ath10k: add dt entry for XO calibration supportGovind Singh
Add dt binding to get xo calibration data support for wifi rf clock. Signed-off-by: Govind Singh <govinds@codeaurora.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-17ath10k: Fix HOST capability QMI incompatibilityBjorn Andersson
The introduction of 768ec4c012ac ("ath10k: update HOST capability QMI message") served the purpose of supporting the new and extended HOST capability QMI message. But while the new message adds a slew of optional members it changes the data type of the "daemon_support" member, which means that older versions of the firmware will fail to decode the incoming request message. There is no way to detect this breakage from Linux and there's no way to recover from sending the wrong message (i.e. we can't just try one format and then fallback to the other), so a quirk is introduced in DeviceTree to indicate to the driver that the firmware requires the 8bit version of this message. Cc: stable@vger.kernel.org Fixes: 768ec4c012ac ("ath10k: update HOST capability qmi message") Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-05-10dt-bindings: doc: net: remove Linux API referencesPetr Štetiar
In commit 687e3d5550c7 ("dt-bindings: doc: reflect new NVMEM of_get_mac_address behaviour") I've kept or added references to Linux of_get_mac_address API which is unwanted so this patch fixes that by removing those references. Fixes: 687e3d5550c7 ("dt-bindings: doc: reflect new NVMEM of_get_mac_address behaviour") Suggested-by: Rob Herring <robh@kernel.org> Signed-off-by: Petr Štetiar <ynezz@true.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-05dt-bindings: doc: reflect new NVMEM of_get_mac_address behaviourPetr Štetiar
As of_get_mac_address now supports NVMEM under the hood, we need to update the bindings documentation with the new nvmem-cell* properties, which would mean copy&pasting a lot of redundant information to every binding documentation currently referencing some of the MAC address properties. So I've just removed all the references to the optional MAC address properties and replaced them with the small note referencing net/ethernet.txt file. Signed-off-by: Petr Štetiar <ynezz@true.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-26dt-bindings: net: mt76: update binding for mt7603 driverFelix Fietkau
In addition to MT7603E PCI devices, the driver supports the WLAN core on MT7628/MT7688, which needs to be defined in DT. Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-12-20dt-bindings: net: ath10k: add new dt entry to identify external FEMBhagavathi Perumal S
This adds new dt entry ext-fem-name, it is used by ath10k driver to select correct timing parameters and configure it in target wifi hardware. The Front End Module(FEM) normally includes tx power amplifier(PA) and rx low noise amplifier(LNA). The default timing parameters like tx end to PA off timing values were fine tuned for internal FEM used in reference design. And these timing values can not be same if ODM modifies hardware design with different external FEM. This DT entry helps to choose correct timing values in driver if different external FEM hardware used. Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-12-20dt-bindings: net: ath10k: fix node name and device type in qcom ath10k exampleBhagavathi Perumal S
In qcom,ath10k documentation, ath10k is used as node name in the example of pci based device. Normally, node name should be class of device and not the model name, so fix it to node name "wifi". And remove the property device_type pci since only pci bridges should have this property. Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-12-20dt: bindings: ath10k: add bindings for wifi iommu nodeGovind Singh
WCN3990 wifi module can optionally make use of the IOMMU. Add binding documentation for phandle to the IOMMU and the stream id of wifi iommu block. Signed-off-by: Govind Singh <govinds@codeaurora.org> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Brian Norris <briannorris@chromium.org> Tested-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-12-20dt: bindings: ath10k: add missing dt properties for WCN3990 wifi nodeGovind Singh
Add missing optional properties in WCN3990 wifi node. Signed-off-by: Govind Singh <govinds@codeaurora.org> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Brian Norris <briannorris@chromium.org> Tested-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-10-13dt: bindings: add bindings for msa memory regionGovind Singh
Add device tree binding documentation details of msa memory region for ath10k qmi client for SDM845/APQ8098 SoC into "qcom,ath10k.txt". Signed-off-by: Govind Singh <govinds@codeaurora.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Acked-by: Niklas Cassel <niklas.cassel@linaro.org> Reviewed-by: Brian Norris <briannorris@chromium.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-07-25dt-bindings: remove 'interrupt-parent' from bindingsRob Herring
'interrupt-parent' is often documented as part of define bindings, but it is really outside the scope of a device binding. It's never required in a given node as it is often inherited from a parent node. Or it can be implicit if a parent node is an 'interrupt-controller' node. So remove it from all the binding files. Cc: Mark Rutland <mark.rutland@arm.com> Cc: devicetree@vger.kernel.org Signed-off-by: Rob Herring <robh@kernel.org>
2018-04-19dt: bindings: add bindings for wcn3990 wifi blockGovind Singh
Add device tree binding documentation details for wcn3990 wifi block present in Qualcomm SDM845/APQ8098 SoC into "qcom,ath10k.txt". Signed-off-by: Govind Singh <govinds@codeaurora.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-12-14Merge ath-next from git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.gitKalle Valo
ath.git patches for 4.16. Major changes: ath10k * enable multiqueue support for all hw using mac80211 wake_tx_queue op * new Kconfig option ATH10K_SPECTRAL to save RAM * show tx stats on QCA9880 * new qcom,ath10k-calibration-variant DT entry * WMI layer support for wcn3990 ath9k * new Kconfig option ATH9K_COMMON_SPECTRAL to save RAM wcn36xx * hardware scan offload support wil6210 * run-time PM support when interface is down
2017-12-14dt: bindings: add new dt entry for ath10k calibration variantSven Eckelmann
The bus + bmi-chip-id + bmi-board-id is not enough to identify the correct board data file on QCA4019 based devices. Multiple different boards share the same values. Only the original reference designs can currently be identified and loaded from the board-2.bin. But these will not result in the correct calibration data when combined with the pre-calibration data from the device. An additional "variant" information has to be provided (via SMBIOS or DT) to select the correct board data for a design which was modified by an ODM. Signed-off-by: Sven Eckelmann <sven.eckelmann@openmesh.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-12-07dt-bindings: net: add mt76 wireless device bindingFelix Fietkau
Add documentation describing how device tree can be used to configure wireless chips supported by the mt76 driver. Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-11-09dt-bindings: Remove leading zeros from bindings notationMarco Franchi
Improve the binding example by removing all the leading zeros to fix the following dtc warnings: Warning (unit_address_format): Node /XXX unit name should not have leading 0s Converted using the following command: perl -p -i -e 's/\@0+([0-9a-f])/\@$1/g' `find ./Documentation/devicetree/bindings "*.txt"` Some unnecessary changes were manually fixed. Signed-off-by: Marco Franchi <marco.franchi@nxp.com> Signed-off-by: Rob Herring <robh@kernel.org>
2017-09-05dt-bindings: Remove "status" from examplesRob Herring
Pretty much any node can have a status property, so it doesn't need to be in examples. Converted with the following command and removed examples with SoC and board specific splits: git grep -l -E 'status.*=.*' Documentation/devicetree/ | xargs sed -i -E '/\sstatus.*=.*"(disabled|ok|okay)/d' Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Rob Herring <robh@kernel.org>
2017-07-07Merge tag 'devicetree-for-4.13' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull DeviceTree updates from Rob Herring: - vsprintf format specifier %pOF for device_node's. This will enable us to stop storing the full node names. Conversion of users will happen next cycle. - Update documentation to point to DT specification instead of ePAPR. - Split out graph and property functions to a separate file. - New of-graph functions for ALSA - Add vendor prefixes for RISC-V, Linksys, iWave Systems, Roofull, Itead, and BananaPi. - Improve dtx_diff utility filename printing. * tag 'devicetree-for-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (32 commits) of: document /sys/firmware/fdt dt-bindings: Add RISC-V vendor prefix vsprintf: Add %p extension "%pOF" for device tree of: find_node_by_full_name rewrite to compare each level of: use kbasename instead of open coding dt-bindings: thermal: add file extension to brcm,ns-thermal of: update ePAPR references to point to Devicetree Specification scripts/dtc: dtx_diff - Show real file names in diff header of: detect invalid phandle in overlay of: be consistent in form of file mode of: make __of_attach_node() static of: address.c header comment typo of: fdt.c header comment typo of: make of_fdt_is_compatible() static dt-bindings: display-timing.txt convert non-ascii characters to ascii Documentation: remove overlay-notes reference to non-existent file dt-bindings: usb: exynos-usb: Add missing required VDD properties dt-bindings: Add vendor prefix for Linksys MAINTAINERS: add device tree ABI documentation file of: Add vendor prefix for iWave Systems Technologies Pvt. Ltd ...
generated by cgit (git 2.34.1) at 2024-06-18 04:47:06 +0000