summaryrefslogtreecommitdiff
path: root/Documentation/devicetree/bindings/net
AgeCommit message (Collapse)Author
2017-06-20dt-bindings: net: sms911x: Add missing optional VDD regulatorsKrzysztof Kozlowski
The lan911x family of devices require supplying from 3.3 V power supplies (connected to VDD_IO, VDD_A and VREG_3.3 pins). The existing driver however obtains only VDD_IO and VDD_A regulators in an optional way so document this in bindings. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-15Doc: net: dsa: b53: update location of referenced dsa.txtxypron.glpk@gmx.de
The referenced file dsa.txt is located at Documentation/devicetree/bindings/net/dsa/dsa.txt Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-27net: dsa: mv88e6xxx: Add eeprom-length to bindingAndrew Lunn
The binding documentation for the mv88e6xxx switch is missing the eeprom-length property, which has been implemented since May 2016, commit f8cd8753def0 ("dsa: mv88e6xxx: Handle eeprom-length property") Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-24net: fec: add post PHY reset delay DT propertyQuentin Schulz
Some PHY require to wait for a bit after the reset GPIO has been toggled. This adds support for the DT property `phy-reset-post-delay` which gives the delay in milliseconds to wait after reset. If the DT property is not given, no delay is observed. Post reset delay greater than 1000ms are invalid. Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Fugang Duan <fugang.duan@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-09Merge tag 'armsoc-dt' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM Device-tree updates from Olof Johansson: "Device-tree continues to see lots of updates. The majority of patches here are smaller changes for new hardware on existing platforms, and there are a few larger changes worth pointing out. Major new platforms: - Gemini has been ported to DT, so a handful of "new" platforms moved over from board files - Rockchip RK3288 support for Tinkerboard and Phytec phyCORE-RK3288 SoM and RDK - A bunch of embedded platforms, several Linksys platforms, Synology DS116, - Motorola Droid4 (really old OMAP-based phone) support is added. Some refactorings, i.e. Allwinner H3/H5 support is commonalized. And lots of smaller changes, cleanups, etc. See shortlog for more description We're adding ability to cross-include DT files between arm and arm64, by creating appropriate links in the dt-include directory, and using arm/ and arm64/ as include prefixes. This will avoid other local hacks such as per-file links between the two arch trees (this broke for external mirroring of DT contents). Now they can just provide their own appropriate dt-include hierarcy per platform" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (349 commits) ARM: dts: exynos: Use - instead of @ for DT OPP entries arm: spear6xx: add DT description of the ADC on SPEAr600 arm: spear6xx: remove unneeded pinctrl properties in spear600-evb arm: spear6xx: switch spear600-evb to the new flash partition DT binding arm: spear6xx: fix spaces in spear600-evb.dts arm: spear6xx: use node labels in spear600-evb.dts arm: spear6xx: add labels to various nodes in spear600.dtsi ARM: dts: vexpress: fix few unit address format warnings ARM: dts: at91: sama5d3_xplained: not all ADC channels are available ARM: dts: at91: sama5d3_xplained: fix ADC vref ARM: dts: at91: add envelope detector mux to the Axentia TSE-850 ARM: dts: armada-38x: label USB and SATA nodes ARM: dts: imx6q-utilite-pro: add hpd gpio ARM: dts: imx6qp-sabresd: Set reg_arm regulator supply ARM: dts: imx6qdl-sabresd: Set LDO regulator supply ARM: dts: imx: add Gateworks Ventana GW5903 support ARM: dts: i.MX25: add AIPS control registers ARM: dts: imx7-colibri: add Carrier Board 3.3V/5V regulators ARM: dts: imx7-colibri: remove 1.8V fixed regulator ARM: dts: imx7-colibri: allow to disable Ethernet rail ...
2017-05-05Merge tag 'devicetree-for-4.12' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull DeviceTree updates from Rob Herring: - fix sparse warnings in drivers/of/ - add more overlay unittests - update dtc to v1.4.4-8-g756ffc4f52f6. This adds more checks on dts files such as unit-address formatting and stricter character sets for node and property names - add a common DT modalias function - move trivial-devices.txt up and out of i2c dir - ARM NVIC interrupt controller binding - vendor prefixes for Sensirion, Dioo, Nordic, ROHM - correct some binding file locations * tag 'devicetree-for-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (24 commits) of: fix sparse warnings in fdt, irq, reserved mem, and resolver code of: fix sparse warning in of_pci_range_parser_one of: fix sparse warnings in of_find_next_cache_node of/unittest: Missing unlocks on error of: fix uninitialized variable warning for overlay test of: fix unittest build without CONFIG_OF_OVERLAY of: Add unit tests for applying overlays of: per-file dtc compiler flags fpga: region: add missing DT documentation for config complete timeout of: Add vendor prefix for ROHM Semiconductor of: fix "/cpus" reference leak in of_numa_parse_cpu_nodes() of: Add vendor prefix for Nordic Semiconductor dt-bindings: arm,nvic: Binding for ARM NVIC interrupt controller on Cortex-M dtc: update warning settings for new bus and node/property name checks scripts/dtc: Update to upstream version v1.4.4-8-g756ffc4f52f6 scripts/dtc: automate getting dtc version and log in update script of: Add function for generating a DT modalias with a newline of: fix of_device_get_modalias returned length when truncating buffers Documentation: devicetree: move trivial-devices out of I2C realm dt-bindings: add vendor prefix for Dioo ..
2017-04-26dt-bindings: mdio: Clarify binding documentFlorian Fainelli
The described GPIO reset property is applicable to *all* child PHYs. If we have one reset line per PHY present on the MDIO bus, these automatically become properties of the child PHY nodes. Finally, indicate how the RESET pulse width must be defined, which is the maximum value of all individual PHYs RESET pulse widths determined by reading their datasheets. Fixes: 69226896ad63 ("mdio_bus: Issue GPIO RESET to PHYs.") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Roger Quadros <rogerq@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-24mdio_bus: Issue GPIO RESET to PHYs.Roger Quadros
Some boards [1] leave the PHYs at an invalid state during system power-up or reset thus causing unreliability issues with the PHY which manifests as PHY not being detected or link not functional. To fix this, these PHYs need to be RESET via a GPIO connected to the PHY's RESET pin. Some boards have a single GPIO controlling the PHY RESET pin of all PHYs on the bus whereas some others have separate GPIOs controlling individual PHY RESETs. In both cases, the RESET de-assertion cannot be done in the PHY driver as the PHY will not probe till its reset is de-asserted. So do the RESET de-assertion in the MDIO bus driver. [1] - am572x-idk, am571x-idk, a437x-idk Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-21Merge tag 'nfc-next-4.12-1' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/nfc-next Samuel Ortiz says: ==================== NFC 4.12 pull request This is the NFC pull request for 4.12. We have: - Improvements for the pn533 command queue handling and device registration order. - Removal of platform data for the pn544 and st21nfca drivers. - Additional device tree options to support more trf7970a hardware options. - Support for Sony's RC-S380P through the port100 driver. - Removal of the obsolte nfcwilink driver. - Headers inclusion cleanups (miscdevice.h, unaligned.h) for many drivers. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-20bindings: net: stmmac: add missing note about LPI interruptNiklas Cassel
The hardware has a LPI interrupt. There is already code in the stmmac driver to parse and handle the interrupt. However, this information was missing from the DT binding. At the same time, improve the description of the existing interrupts. Signed-off-by: Niklas Cassel <niklas.cassel@axis.com> Acked-By: Joao Pinto <jpinto@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-20net: dsa: LAN9303: add MDIO managed mode supportJuergen Beisert
When the LAN9303 device is in MDIO manged mode, all register accesses must be done via MDIO. Please note: this code is compile time tested only due to the absence of such configured hardware. It is based on a patch from Stefan Roese from 2014. Signed-off-by: Juergen Borleis <jbe@pengutronix.de> CC: devicetree@vger.kernel.org CC: robh+dt@kernel.org CC: mark.rutland@arm.com CC: sr@denx.de Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-20net: dsa: LAN9303: add I2C managed mode supportJuergen Beisert
In this mode the switch device and the internal phys will be managed via I2C interface. The MDIO interface is still supported, but for the (emulated) CPU port only. Signed-off-by: Juergen Borleis <jbe@pengutronix.de> CC: devicetree@vger.kernel.org CC: robh+dt@kernel.org CC: mark.rutland@arm.com Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-18ftgmac100: Document device-tree bindingBenjamin Herrenschmidt
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-17Merge branch 'for-upstream' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next Johan Hedberg says: ==================== pull request: bluetooth-next 2017-04-14 Here's the main batch of Bluetooth & 802.15.4 patches for the 4.12 kernel. - Many fixes to 6LoWPAN, in particular for BLE - New CA8210 IEEE 802.15.4 device driver (accounting for most of the lines of code added in this pull request) - Added Nokia Bluetooth (UART) HCI driver - Some serdev & TTY changes that are dependencies for the Nokia driver (with acks from relevant maintainers and an agreement that these come through the bluetooth tree) - Support for new Intel Bluetooth device - Various other minor cleanups/fixes here and there Please let me know if there are any issues pulling. Thanks. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-13dt-bindings: net: Add TI WiLink shared transport bindingRob Herring
Add serial slave device binding for the TI WiLink series of Bluetooth/FM/GPS devices. Signed-off-by: Rob Herring <robh@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: netdev@vger.kernel.org Cc: devicetree@vger.kernel.org Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2017-04-13dt-bindings: allow up to three clocks for orion-mdioRussell King
Armada 8040 needs three clocks to be enabled for MDIO accesses to work. Update the binding to allow the extra clocks to be specified. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-13dt-bindings: correct marvell orion MDIO binding documentRussell King
Correct the Marvell Orion MDIO binding document to properly reflect the cases where an interrupt is present. Augment the examples to show this. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-13dt-bindings: net: bluetooth: Add nokia-bluetoothSebastian Reichel
Add binding document for serial bluetooth chips using Nokia H4+ protocol. Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Sebastian Reichel <sre@kernel.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2017-04-12ieee802154: Add device tree documentation for CA8210Harry Morris
Signed-off-by: Harry Morris <h.morris@cascoda.com> Acked-by: Stefan Schmidt <stefan@osg.samsung.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2017-04-07dt-bindings: net: dsa: add Mediatek MT7530 bindingSean Wang
Add device-tree binding for Mediatek MT7530 switch. Cc: devicetree@vger.kernel.org Signed-off-by: Sean Wang <sean.wang@mediatek.com> Acked-by: Rob Herring <robh@kernel.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-05NFC: trf7970a: Add device tree option of 1.8 Volt IO voltageGeoff Lansberry
The TRF7970A has configuration options for supporting hardware designs with 1.8 Volt or 3.3 Volt IO. This commit adds a device tree option, using a fixed regulator binding, for setting the io voltage to match the hardware configuration. If no option is supplied it defaults to 3.3 volt configuration. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Mark Greer <mgreer@animalcreek.com> Signed-off-by: Geoff Lansberry <geoff@kuvee.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2017-04-05NFC: trf7970a: add device tree option for 27MHz clockGeoff Lansberry
The TRF7970A has configuration options to support hardware designs which use a 27.12MHz clock. This commit adds a device tree option 'clock-frequency' to support configuring the this chip for default 13.56MHz clock or the optional 27.12MHz clock. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Mark Greer <mgreer@animalcreek.com> Signed-off-by: Geoff Lansberry <geoff@kuvee.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2017-04-04can: holt_hi311x: document device tree bindingsAkshay Bhat
Document the HOLT HI-311x CAN device tree bindings. Signed-off-by: Akshay Bhat <nodeax@gmail.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2017-04-04can: ti_hecc: Add TI HECC DT binding documentationYegor Yefremov
DT binding documentation for TI High End CAN Controller Signed-off-by: Anton Glukhov <anton.a.glukhov@gmail.com> Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2017-04-02net: stmmac: fix cbs configurationJoao Pinto
Sending again, because forgot to include net-dev. The QoS IP does not accept AVB capabilities to default/queue 0, this way we guarantee 75% bandwidth for AVB. This patch assures that only queues >= 1 gets CBS confgured. Additional info was also added to stmmac.txt. Reported-by: Niklas Cassel <niklas.cassel@axis.com> Signed-off-by: Joao Pinto <jpinto@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-02NFC: Make EN2 pin optional in the TRF7970A driverGuan Ben
Make the EN2 pin optional. This is useful for boards, which have this pin fix wired, for example to ground. Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Guan Ben <ben.guan@cn.bosch.com> Signed-off-by: Mark Jonas <mark.jonas@de.bosch.com> Signed-off-by: Heiko Schocher <hs@denx.de> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2017-03-21net: stmmac: RX queue routing configurationJoao Pinto
This patch adds the configuration of RX queues' routing. Signed-off-by: Joao Pinto <jpinto@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-21net: stmmac: TX and RX queue priority configurationJoao Pinto
This patch adds the configuration of RX and TX queues' priority. Signed-off-by: Joao Pinto <jpinto@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-21dt-bindings: net: generalize moxart-mac to support all faraday based ftmac IPGreentime Hu
Andestech and moxa use the same faraday mac IP, so we use faraday,ftmac.txt to describe it. Signed-off-by: Greentime Hu <green.hu@gmail.com> Signed-off-by: Rob Herring <robh@kernel.org>
2017-03-13dt-bindings: net: update bcmgenet binding for GENETv5Doug Berger
The device tree documentation must be updated to reflect the new compatible strings "brcm,genet-v5" and "brcm,genet-mdio-v5" used by the GENETv5 driver. Signed-off-by: Doug Berger <opendmb@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-13dt-bindings: net: document bcmgenet WoL interruptDoug Berger
A third interrupt cell can be provided to optionally specify the interrupt used for handling Wake on LAN events. Typically the wake up handling uses a separate interrupt controller, so the interrupts-extended property is used to accommodate this. Signed-off-by: Doug Berger <opendmb@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-12net: stmmac: configuration of CBS in case of a TX AVB queueJoao Pinto
This patch adds the configuration of the AVB Credit-Based Shaper. Signed-off-by: Joao Pinto <jpinto@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-12net: stmmac: multiple queues dt configurationJoao Pinto
This patch adds the multiple queues configuration in the Device Tree. It was also created a set of structures to keep the RX and TX queues configurations to be used in the driver. Signed-off-by: Joao Pinto <jpinto@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-12net: stmmac: Rename clk_ptp_ref clock to ptp_refThierry Reding
There aren't currently any users of the "clk_ptp_ref", but there are other references to "ptp_ref", so I'm leaning towards considering that a typo. Fix it. Cc: Mark Rutland <mark.rutland@arm.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: devicetree@vger.kernel.org Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-09dt-bindings: net: update Marvell PPv2 binding for PPv2.2 supportThomas Petazzoni
The Marvell PPv2 Device Tree binding was so far only used to describe the PPv2.1 network controller, used in the Marvell Armada 375. A new version of this IP block, PPv2.2 is used in the Marvell Armada 7K/8K processor. This commit extends the existing binding so that it can also be used to describe PPv2.2 hardware. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-08ARM: dts: armada-xp-98dx3236: combine dfx server nodesChris Packham
Rather than having a separate node for the dfx server add a reg property to the parent node. This give some compatibility with the Marvell supplied SDK. As no upstream driver currently exists for this block and support for this SoC is still quite fresh in the kernel it should not be necessary to retain a backwards compatible binding. Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2017-02-27scripts/spelling.txt: add "followings" pattern and fix typo instancesMasahiro Yamada
Fix typos and add the following to the scripts/spelling.txt: followings||following While we are here, add a missing colon in the boilerplate in DT binding documents. The "you SoC" in allwinner,sunxi-pinctrl.txt was fixed as well. I reworded "as the followings:" to "as follows:" for drivers/usb/gadget/udc/renesas_usb3.c. Link: http://lkml.kernel.org/r/1481573103-11329-32-git-send-email-yamada.masahiro@socionext.com Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-23Merge tag 'armsoc-dt' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM DT updates from Arnd Bergmann: "A total of 380 patches this time, mostly adding support for more hardware in the device tree descriptions. There is not much exciting here for 4.11, but I've tried my best to condense the information from the pull requests I got into a readable summary. Noteworthy changes to existing platforms include: - The GIC memory map was a bit wrong almost everywhere and now gets fixed up - The Allwinner platforms convert to the generic pinmux properties - The Marvell EBU platforms now use the new DSA binding - Samsung Exynos4212 was unused and gets removed - The Renesas power management got improved New production machines: - Lego Mindstorms EV3: https://www.lego.com/en-us/mindstorms/about-ev3 - Beelink X2 Android media box: http://linux-sunxi.org/Beelink_X2 - "Romulus" baseboard management controller for OpenPower - Axentia TSE-850 Data Radio Channel (DARC) encoder: http://www.axentia.se/db/equipment.html - Luxul XAP-1410 and XWR-1200 wireless access points: https://luxul.com/xap-1410 New SoCs: - Allwinner H2+ and V3s, both minor variations of already supported chips: http://www.allwinnertech.com/index.php?c=product&a=index&id=38 - Marvell Prestera DX packet processors based on Armada XP architecture: http://www.marvell.com/switching/prestera-dx/ - Samsung Exynos4412 Prime gets added, a minor variation of Exynos4412 New developer and reference boards: - Lichee Pi One, Lichee Pi Zero and Orange Pi Zero, all based on Allwinner SoCs: http://linux-sunxi.org/LicheePi_One http://www.orangepi.org/orangepizero/ - SAMA5d36ek Reference platform: http://www.atmel.com/tools/sama5d36-ek.aspx - Beaglebone Green Wireless and Black Wireless: https://beagleboard.org/black-wireless https://beagleboard.org/green-wireless - phyCORE-AM335x System on Module: http://phytec.com/products/system-on-modules/phycore/am335x/ - New revision of "vf610-zii" Zodiac Inflight Innovations board - Various i.MX System-on-Module: Is.IoT MX6UL, SavageBoard, Engicam i.Core: http://www.opossom.com/english/index.html http://www.savageboard.org/ http://www.engicam.com/en/products/embedded/som/sodimm/is-iot-mx6ul http://www.engicam.com/en/products/embedded/som/sodimm/i-core-m6s-dl-d-q - Liebherr (LWN) monitor 6 based on i.MX6 Quad, no idea what this is - Cleanups and bugfixes on at91, bcm53xx, i.MX, mvebu, omap, oxnas, qcom, rockchip, sti, stm32 and tegra New device supports added to some boards and SoCs, briefly by platform: - Allwinner: SPDIF, A33 cpufreq, A33 Mali GPU - Aspeed: network, ipmi bt, gpio, pinmux - Broadcom: video encoder for raspberry pi, qspi, ethernet, sd/mmc - TI DaVinci: gpio, lcdc, usb, video-in, uart - TI Keystone 2: MSM RAM, power/reset, uart - Mediatek MT2701: clocks, iommu, spi, nand, adc, thermal - Marvell EBU: ethernet switch on Turris Omnia - NXP i.MX: otp ram, USB, wifi, bluetooth, spdif, spi, pmic, eeprom, mmc, nand - TI OMAP: - Qualcomm: coresight, gyro/accelerometer, hdmi - Renesas: pmic, soc-id - Rockchip: qos - Samsung: audio on Odroid-X - Socfpga: FPGA manager, i2c, led, can, watchdog, nand, power monitor - STi: video in/out - STM32: timer, pwm, i2c, rtc, add, i2s - NVIDIA Tegra: tpm - Uniphier: mmc/sd pinmux" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (380 commits) ARM: dts: armada-385-linksys: fix DSA compatible property ARM: dts: Fix typo in armada-xp-98dx4251 ARM: DTS: Fix register map for virt-capable GIC dt-bindings: arm,gic: Fix binding example for a virt-capable GIC ARM: dts: sun8i: sinlinx: Enable audio nodes ARM: dts: sun8i: parrot: Enable audio nodes ARM: dts: sun8i: Add audio codec, dai and card for A33 ARM: dts: Add EMAC AXI settings for Arria10 ARM: dts: am335x-chiliboard: Support charger ARM: dts: am335x-chiliboard: Support power button ARM: sun8i: dt: Add mali node dt-bindings: gpu: Add Mali Utgard bindings ARM: dts: stm32: Add I2C1 support for STM32429 eval board ARM: dts: stm32: Add I2C1 support for STM32F429 SoC ARM: dts: stm32: Use clock DT binding definition on stm32f429 family dt-bindings: mfd: stm32f4: Add missing binding definition dt-bindings: mfd: stm32f4: Fix STM32F4_X_CLOCK() macro ARM: dts: stm32: Enable pwm1 and pwm3 for stm32f469-disco ARM: dts: stm32: add Timers driver for stm32f429 MCU ARM: dts: add the AB8500 sysclk to the device trees ...
2017-02-22Merge tag 'devicetree-for-4.11' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull DeviceTree updates from Rob Herring: "Pretty standard stuff with dtc upstream sync being the biggest piece. - Sync dtc to upstream commit 0931cea3ba20. This picks up overlay support in dtc. - Set dma_ops for reserved memory users. - Make references to IOMMU consistent in DT bindings. - Cleanup references to pm_power_off in bindings. - Move some display bindings that snuck into the old bindings/video/ path. - Fix some wrong documentation paths caused from binding restructuring. - Vendor prefixes for Faraday and Fujitsu. - Fix an of_node ref counting leak in of_find_node_opts_by_path - Introduce new graph helper of_graph_get_remote_node() which will be used by DRM drivers in 4.12" * tag 'devicetree-for-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (27 commits) DT: add Faraday Tec. as vendor of: introduce of_graph_get_remote_node of: Add missing space at end of pr_fmt(). of: make of_device_make_bus_id() static of: fix of_node leak caused in of_find_node_opts_by_path dt-bindings: net: remove reference to fixed link support dt-bindings: power: reset: qnap-poweroff: Drop reference to pm_power_off dt-bindings: power: reset: gpio-poweroff: Drop reference to pm_power_off dt-bindings: mfd: as3722: Drop reference to pm_power_off dt-bindings: display: move ANX7814 and SiI8620 bridge bindings of/unittest: Swap arguments of of_unittest_apply_overlay() Documentation: usb: fix wrong documentation paths serial: fsl-imx-uart.txt: Remove generic property devicetree: Add Fujitsu Ltd. vendor prefix Documentation: display: fix wrong documentation paths of: remove redundant memset in overlay bus:qcom : Fix typo in qcom,ebi2.txt dt-bindings: qman: Remove pool channel node Documentation: panel-dpi: fix path to display-timing.txt devicetree: bindings: clk: mvebu: fix description for sata1 on Armada XP ...
2017-02-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds
Pull networking updates from David Miller: "Highlights: 1) Support TX_RING in AF_PACKET TPACKET_V3 mode, from Sowmini Varadhan. 2) Simplify classifier state on sk_buff in order to shrink it a bit. From Willem de Bruijn. 3) Introduce SIPHASH and it's usage for secure sequence numbers and syncookies. From Jason A. Donenfeld. 4) Reduce CPU usage for ICMP replies we are going to limit or suppress, from Jesper Dangaard Brouer. 5) Introduce Shared Memory Communications socket layer, from Ursula Braun. 6) Add RACK loss detection and allow it to actually trigger fast recovery instead of just assisting after other algorithms have triggered it. From Yuchung Cheng. 7) Add xmit_more and BQL support to mvneta driver, from Simon Guinot. 8) skb_cow_data avoidance in esp4 and esp6, from Steffen Klassert. 9) Export MPLS packet stats via netlink, from Robert Shearman. 10) Significantly improve inet port bind conflict handling, especially when an application is restarted and changes it's setting of reuseport. From Josef Bacik. 11) Implement TX batching in vhost_net, from Jason Wang. 12) Extend the dummy device so that VF (virtual function) features, such as configuration, can be more easily tested. From Phil Sutter. 13) Avoid two atomic ops per page on x86 in bnx2x driver, from Eric Dumazet. 14) Add new bpf MAP, implementing a longest prefix match trie. From Daniel Mack. 15) Packet sample offloading support in mlxsw driver, from Yotam Gigi. 16) Add new aquantia driver, from David VomLehn. 17) Add bpf tracepoints, from Daniel Borkmann. 18) Add support for port mirroring to b53 and bcm_sf2 drivers, from Florian Fainelli. 19) Remove custom busy polling in many drivers, it is done in the core networking since 4.5 times. From Eric Dumazet. 20) Support XDP adjust_head in virtio_net, from John Fastabend. 21) Fix several major holes in neighbour entry confirmation, from Julian Anastasov. 22) Add XDP support to bnxt_en driver, from Michael Chan. 23) VXLAN offloads for enic driver, from Govindarajulu Varadarajan. 24) Add IPVTAP driver (IP-VLAN based tap driver) from Sainath Grandhi. 25) Support GRO in IPSEC protocols, from Steffen Klassert" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1764 commits) Revert "ath10k: Search SMBIOS for OEM board file extension" net: socket: fix recvmmsg not returning error from sock_error bnxt_en: use eth_hw_addr_random() bpf: fix unlocking of jited image when module ronx not set arch: add ARCH_HAS_SET_MEMORY config net: napi_watchdog() can use napi_schedule_irqoff() tcp: Revert "tcp: tcp_probe: use spin_lock_bh()" net/hsr: use eth_hw_addr_random() net: mvpp2: enable building on 64-bit platforms net: mvpp2: switch to build_skb() in the RX path net: mvpp2: simplify MVPP2_PRS_RI_* definitions net: mvpp2: fix indentation of MVPP2_EXT_GLOBAL_CTRL_DEFAULT net: mvpp2: remove unused register definitions net: mvpp2: simplify mvpp2_bm_bufs_add() net: mvpp2: drop useless fields in mvpp2_bm_pool and related code net: mvpp2: remove unused 'tx_skb' field of 'struct mvpp2_tx_queue' net: mvpp2: release reference to txq_cpu[] entry after unmapping net: mvpp2: handle too large value in mvpp2_rx_time_coal_set() net: mvpp2: handle too large value handling in mvpp2_rx_pkts_coal_set() net: mvpp2: remove useless arguments in mvpp2_rx_{pkts, time}_coal_set ...
2017-02-20Merge branch 'for-upstream' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next Johan Hedberg says: ==================== pull request: bluetooth-next 2017-02-19 Here's a set of Bluetooth patches for the 4.11 kernel: - New USB IDs to the btusb driver - Race fix in btmrvl driver - Added out-of-band wakeup support to the btusb driver - NULL dereference fix to bt_sock_recvmsg Please let me know if there are any issues pulling. Thanks. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-19net: ethernet: stmmac: dwmac-rk: Add RK3328 gmac supportdavid.wu
Add constants and callback functions for the dwmac on rk3328 socs. As can be seen, the base structure is the same, only registers and the bits in them moved slightly. Signed-off-by: david.wu <david.wu@rock-chips.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-16Bluetooth: btusb: Configure Marvell to use one of the pins for oob wakeupRajat Jain
The Marvell devices may have many gpio pins, and hence for wakeup on these out-of-band pins, the chip needs to be told which pin is to be used for wakeup, using an hci command. Thus, we read the pin number etc from the device tree node and send a command to the chip. Signed-off-by: Rajat Jain <rajatja@google.com> Reviewed-by: Brian Norris <briannorris@chromium.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2017-02-16Bluetooth: btusb: Add out-of-band wakeup supportRajat Jain
Some onboard BT chips (e.g. Marvell 8997) contain a wakeup pin that can be connected to a gpio on the CPU side, and can be used to wakeup the host out-of-band. This can be useful in situations where the in-band wakeup is not possible or not preferable (e.g. the in-band wakeup may require the USB host controller to remain active, and hence consuming more system power during system sleep). The oob gpio interrupt to be used for wakeup on the CPU side, is read from the device tree node, (using standard interrupt descriptors). A devcie tree binding document is also added for the driver. The compatible string is in compliance with Documentation/devicetree/bindings/usb/usb-device.txt Signed-off-by: Rajat Jain <rajatja@google.com> Reviewed-by: Brian Norris <briannorris@chromium.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2017-02-13devicetree: document new marvell-8xxx and pwrseq-sd8787 optionsMatt Ranostay
Cc: Rob Herring <robh@kernel.org> Cc: devicetree@vger.kernel.org Signed-off-by: Matt Ranostay <matt@ranostay.consulting> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Rob Herring <robh@kernel.org>
2017-02-08net: phy: Add LED mode driver for Microsemi PHYs.Raju Lakkaraju
LED Mode: Microsemi PHY support 2 LEDs (LED[0] and LED[1]) to display different status information that can be selected by setting LED mode. LED Mode parameter (vsc8531, led-0-mode) and (vsc8531, led-1-mode) get from Device Tree. Signed-off-by: Raju Lakkaraju <Raju.Lakkaraju@microsemi.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-07Documentation: devicetree: Add PHY no lane swap bindingLukasz Majewski
Add the documentation to avoid PHY lane swapping. This is a boolean entry to notify the phy device drivers that the TX/RX lanes NO need to be swapped. The use case for this binding mostly happens after wrong HW configuration of PHY IC during bootstrap. Signed-off-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-07dt-bindings: net: remove reference to fixed link supportThomas Petazzoni
Contrary to what the Device Tree binding indicates, the binding for the PPv2 network device currently doesn't provide any fixed link functionality. This commit adjusts the Device Tree binding documentation accordingly. Reported-by: Russell King - ARM Linux <linux@armlinux.org.uk> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Rob Herring <robh@kernel.org>
2017-02-07net: phy: Add 2000base-x, 2500base-x and rxaui modesAndrew Lunn
The mv88e6390 ports 9 and 10 supports some additional PHY modes. Add these modes to the PHY core so they can be used in the binding. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-31ARM: dts: mvebu: Add device tree for 98DX3236 SoCsChris Packham
The Marvell 98DX3236, 98DX3336, 98DX4521 and variants are switch ASICs with integrated CPUs. They are similar to the Armada XP SoCs but have different I/O interfaces. [gregory.clement@free-electrons.com: fix topic] Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
generated by cgit (git 2.34.1) at 2025-06-01 10:02:46 +0000