summaryrefslogtreecommitdiff
path: root/Documentation/devicetree/bindings/pci
AgeCommit message (Collapse)Author
2022-08-04Merge tag 'pci-v5.20-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull pci updates from Bjorn Helgaas: "Enumeration: - Consolidate duplicated 'next function' scanning and extend to allow 'isolated functions' on s390, similar to existing hypervisors (Niklas Schnelle) Resource management: - Implement pci_iobar_pfn() for sparc, which allows us to remove the sparc-specific pci_mmap_page_range() and pci_mmap_resource_range(). This removes the ability to map the entire PCI I/O space using /proc/bus/pci, but we believe that's already been broken since v2.6.28 (Arnd Bergmann) - Move common PCI definitions to asm-generic/pci.h and rework others to be be more specific and more encapsulated in arches that need them (Stafford Horne) Power management: - Convert drivers to new *_PM_OPS macros to avoid need for '#ifdef CONFIG_PM_SLEEP' or '__maybe_unused' (Bjorn Helgaas) Virtualization: - Add ACS quirk for Broadcom BCM5750x multifunction NICs that isolate the functions but don't advertise an ACS capability (Pavan Chebbi) Error handling: - Clear PCI Status register during enumeration in case firmware left errors logged (Kai-Heng Feng) - When we have native control of AER, enable error reporting for all devices that support AER. Previously only a few drivers enabled this (Stefan Roese) - Keep AER error reporting enabled for switches. Previously we enabled this during enumeration but immediately disabled it (Stefan Roese) - Iterate over error counters instead of error strings to avoid printing junk in AER sysfs counters (Mohamed Khalfella) ASPM: - Remove pcie_aspm_pm_state_change() so ASPM config changes, e.g., via sysfs, are not lost across power state changes (Kai-Heng Feng) Endpoint framework: - Don't stop an EPC when unbinding an EPF from it (Shunsuke Mie) Endpoint embedded DMA controller driver: - Simplify and clean up support for the DesignWare embedded DMA (eDMA) controller (Frank Li, Serge Semin) Broadcom STB PCIe controller driver: - Avoid config space accesses when link is down because we can't recover from the CPU aborts these cause (Jim Quinlan) - Look for power regulators described under Root Ports in DT and enable them before scanning the secondary bus (Jim Quinlan) - Disable/enable regulators in suspend/resume (Jim Quinlan) Freescale i.MX6 PCIe controller driver: - Simplify and clean up clock and PHY management (Richard Zhu) - Disable/enable regulators in suspend/resume (Richard Zhu) - Set PCIE_DBI_RO_WR_EN before writing DBI registers (Richard Zhu) - Allow speeds faster than Gen2 (Richard Zhu) - Make link being down a non-fatal error so controller probe doesn't fail if there are no Endpoints connected (Richard Zhu) Loongson PCIe controller driver: - Add ACPI and MCFG support for Loongson LS7A (Huacai Chen) - Avoid config reads to non-existent LS2K/LS7A devices because a hardware defect causes machine hangs (Huacai Chen) - Work around LS7A integrated devices that report incorrect Interrupt Pin values (Jianmin Lv) Marvell Aardvark PCIe controller driver: - Add support for AER and Slot capability on emulated bridge (Pali Rohár) MediaTek PCIe controller driver: - Add Airoha EN7532 to DT binding (John Crispin) - Allow building of driver for ARCH_AIROHA (Felix Fietkau) MediaTek PCIe Gen3 controller driver: - Print decoded LTSSM state when the link doesn't come up (Jianjun Wang) NVIDIA Tegra194 PCIe controller driver: - Convert DT binding to json-schema (Vidya Sagar) - Add DT bindings and driver support for Tegra234 Root Port and Endpoint mode (Vidya Sagar) - Fix some Root Port interrupt handling issues (Vidya Sagar) - Set default Max Payload Size to 256 bytes (Vidya Sagar) - Fix Data Link Feature capability programming (Vidya Sagar) - Extend Endpoint mode support to devices beyond Controller-5 (Vidya Sagar) Qualcomm PCIe controller driver: - Rework clock, reset, PHY power-on ordering to avoid hangs and improve consistency (Robert Marko, Christian Marangi) - Move pipe_clk handling to PHY drivers (Dmitry Baryshkov) - Add IPQ60xx support (Selvam Sathappan Periakaruppan) - Allow ASPM L1 and substates for 2.7.0 (Krishna chaitanya chundru) - Add support for more than 32 MSI interrupts (Dmitry Baryshkov) Renesas R-Car PCIe controller driver: - Convert DT binding to json-schema (Herve Codina) - Add Renesas RZ/N1D (R9A06G032) to rcar-gen2 DT binding and driver (Herve Codina) Samsung Exynos PCIe controller driver: - Fix phy-exynos-pcie driver so it follows the 'phy_init() before phy_power_on()' PHY programming model (Marek Szyprowski) Synopsys DesignWare PCIe controller driver: - Simplify and clean up the DWC core extensively (Serge Semin) - Fix an issue with programming the ATU for regions that cross a 4GB boundary (Serge Semin) - Enable the CDM check if 'snps,enable-cdm-check' exists; previously we skipped it if 'num-lanes' was absent (Serge Semin) - Allocate a 32-bit DMA-able page to be MSI target instead of using a driver data structure that may not be addressable with 32-bit address (Will McVicker) - Add DWC core support for more than 32 MSI interrupts (Dmitry Baryshkov) Xilinx Versal CPM PCIe controller driver: - Add DT binding and driver support for Versal CPM5 Gen5 Root Port (Bharat Kumar Gogada)" * tag 'pci-v5.20-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (150 commits) PCI: imx6: Support more than Gen2 speed link mode PCI: imx6: Set PCIE_DBI_RO_WR_EN before writing DBI registers PCI: imx6: Reformat suspend callback to keep symmetric with resume PCI: imx6: Move the imx6_pcie_ltssm_disable() earlier PCI: imx6: Disable clocks in reverse order of enable PCI: imx6: Do not hide PHY driver callbacks and refine the error handling PCI: imx6: Reduce resume time by only starting link if it was up before suspend PCI: imx6: Mark the link down as non-fatal error PCI: imx6: Move regulator enable out of imx6_pcie_deassert_core_reset() PCI: imx6: Turn off regulator when system is in suspend mode PCI: imx6: Call host init function directly in resume PCI: imx6: Disable i.MX6QDL clock when disabling ref clocks PCI: imx6: Propagate .host_init() errors to caller PCI: imx6: Collect clock enables in imx6_pcie_clk_enable() PCI: imx6: Factor out ref clock disable to match enable PCI: imx6: Move imx6_pcie_clk_disable() earlier PCI: imx6: Move imx6_pcie_enable_ref_clk() earlier PCI: imx6: Move PHY management functions together PCI: imx6: Move imx6_pcie_grp_offset(), imx6_pcie_configure_type() earlier PCI: imx6: Convert to NOIRQ_SYSTEM_SLEEP_PM_OPS() ...
2022-08-04Merge branch 'pci/ctrl/xilinx-cpm'Bjorn Helgaas
- Add DT binding and driver support for Versal CPM5 Gen5 Root Port (Bharat Kumar Gogada) * pci/ctrl/xilinx-cpm: MAINTAINERS: Add Xilinx Versal CPM Root Port maintainers PCI: xilinx-cpm: Add support for Versal CPM5 Root Port dt-bindings: PCI: xilinx-cpm: Add Versal CPM5 Root Port
2022-08-04Merge branch 'pci/ctrl/tegra194'Bjorn Helgaas
- Fix tegra_pcie_config_ep() power management in error path (Miaoqian Lin) - Convert DT binding to json-schema (Vidya Sagar) - Add DT bindings and driver support for Tegra234 Root Port and Endpoint mode (Vidya Sagar) - Disable MSI for Tegra234 Root Ports so they use INTx for all events (PCIe doesn't allow mixing INTx and MSI/MSI-X) (Vidya Sagar) - Search for Vendor-Specific RAS-DEC capability instead of hard-coding offset (Vidya Sagar) - Fix unintentional APPL_INTR_STATUS_L0 value overwrite in Root Port interrupt handling (Vidya Sagar) - Clear Bandwidth Management interrupt status bit to avoid interrupt storm (Vidya Sagar) - Set default Max Payload Size to 256 bytes (Vidya Sagar) - Fix offset when clearing bit in Data Link Feature capability (Vidya Sagar) - Extend Endpoint mode support to devices beyond Controller-5 (Vidya Sagar) * pci/ctrl/tegra194: PCI: tegra194: Add Tegra234 PCIe support PCI: tegra194: Extend Endpoint mode support PCI: tegra194: Fix link up retry sequence PCI: tegra194: Clean up the exit path for Endpoint mode PCI: tegra194: Enable support for 256 Byte payload PCI: tegra194: Clear bandwidth management status PCI: tegra194: Fix Root Port interrupt handling PCI: tegra194: Find RAS DES PCIe capability offset Revert "PCI: tegra194: Rename tegra_pcie_dw to tegra194_pcie" PCI: Disable MSI for Tegra234 Root Ports dt-bindings: PCI: tegra234: Add schema for tegra234 Endpoint mode dt-bindings: PCI: tegra234: Add schema for tegra234 Root Port mode dt-bindings: PCI: tegra194: Convert to json-schema PCI: tegra194: Fix PM error handling in tegra_pcie_config_ep() # Conflicts: # drivers/pci/controller/dwc/pcie-designware.h # drivers/pci/controller/dwc/pcie-tegra194.c
2022-08-04Merge branch 'pci/ctrl/rcar-gen2'Bjorn Helgaas
- Convert DT binding to json-schema (Herve Codina) - Add Renesas RZ/N1D (R9A06G032) to rcar-gen2 DT binding (Herve Codina) - Add Renesas RZ/N1D compatible string ("renesas,pci-rzn1") to rcar-gen2 driver (Herve Codina) * pci/ctrl/rcar-gen2: PCI: rcar-gen2: Add RZ/N1 SOC family compatible string dt-bindings: PCI: renesas,pci-rcar-gen2: Add device tree support for R9A06G032 dt-bindings: PCI: pci-rcar-gen2: Convert bindings to json-schema
2022-08-04Merge branch 'pci/ctrl/qcom'Bjorn Helgaas
- Add PHY clock source implementation (Dmitry Baryshkov) - Use new clk_regmap_phy_mux_ops for gcc-sm8450 and gcc-sc7280 PCIe pipe clocks (Dmitry Baryshkov) - Set up rev 2.1.0 PARF_PHY before enabling clocks (Christian Marangi) - Power on PHY before accessing IPQ8074 DBI registers to avoid boot hangs (Robert Marko) - Power on PHY before accessing DBI registers on all variants for consistency (Robert Marko) - Remove unnecessary pipe_clk handling since this is done in PHY drivers (Dmitry Baryshkov) - Drop manual pipe_clk_src handling (Dmitry Baryshkov) - Move GEN3_RELATED DBI definitions to common dwc header (Baruch Siach) - Define slot capabilities using generic PCI_EXP_SLTCAP_* macros (Baruch Siach) - Add IPQ60xx support (Selvam Sathappan Periakaruppan) - Fix DT description typo (Baruch Siach) - Fix DT "compatibles" typo (Johan Hovold) - Allow ASPM L1 and substates for 2.7.0 (Krishna chaitanya chundru) * pci/ctrl/qcom: PCI: qcom: Allow ASPM L1 and substates for 2.7.0 dt-bindings: PCI: qcom: Fix reset conditional dt-bindings: PCI: qcom: Fix description typo PCI: qcom: Add IPQ60xx support PCI: qcom: Define slot capabilities using PCI_EXP_SLTCAP_* PCI: dwc: Move GEN3_RELATED DBI definitions to common header PCI: qcom: Drop manual pipe_clk_src handling PCI: qcom: Remove unnecessary pipe_clk handling PCI: qcom: Power on PHY before DBI register accesses PCI: qcom: Power on PHY before IPQ8074 DBI register accesses PCI: qcom: Set up rev 2.1.0 PARF_PHY before enabling clocks clk: qcom: gcc-sc7280: use new clk_regmap_phy_mux_ops for PCIe pipe clocks clk: qcom: gcc-sm8450: use new clk_regmap_phy_mux_ops for PCIe pipe clocks clk: qcom: regmap: add PHY clock source implementation
2022-08-04Merge branch 'pci/ctrl/mediatek'Bjorn Helgaas
- Add Airoha EN7532 to DT binding (John Crispin) - Allow building of mediatek driver for ARCH_AIROHA (Felix Fietkau) * pci/ctrl/mediatek: PCI: mediatek: Allow building for ARCH_AIROHA dt-bindings: PCI: mediatek: Add Airoha EN7532 support
2022-08-01dt-bindings: PCI: host-generic-pci: Allow IOMMU and MSI propertiesRob Herring
Allow 'iommu-map', 'iommu-map-mask', and 'msi-parent' properties for generic host. This fixes unevaluated property warnings on Arm Juno, AMD Seattle, and FSL LS1028a. Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220728175137.1172841-1-robh@kernel.org
2022-08-01dt-bindings: PCI: qcom: Support additional MSI vectorsDmitry Baryshkov
On Qualcomm platforms each group of 32 MSI vectors is routed to the separate GIC interrupt. Document mapping of additional interrupts. Link: https://lore.kernel.org/r/20220707134733.2436629-6-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Johan Hovold <johan+linaro@kernel.org> Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com>
2022-07-22dt-bindings: PCI: tegra234: Add schema for tegra234 Endpoint modeVidya Sagar
Add support for PCIe controllers that operate in the Endpoint mode in tegra234 chipset. Link: https://lore.kernel.org/r/20220721142052.25971-4-vidyas@nvidia.com Signed-off-by: Vidya Sagar <vidyas@nvidia.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Rob Herring <robh@kernel.org>
2022-07-22dt-bindings: PCI: tegra234: Add schema for tegra234 Root Port modeVidya Sagar
Add support for PCIe controllers that operate in the Root Port mode in tegra234 chipset. Link: https://lore.kernel.org/r/20220721142052.25971-3-vidyas@nvidia.com Signed-off-by: Vidya Sagar <vidyas@nvidia.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Rob Herring <robh@kernel.org>
2022-07-22dt-bindings: PCI: tegra194: Convert to json-schemaVidya Sagar
Convert the Tegra194 PCIe bindings from the free-form text format to json-schema. Link: https://lore.kernel.org/r/20220721142052.25971-2-vidyas@nvidia.com Signed-off-by: Vidya Sagar <vidyas@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Rob Herring <robh@kernel.org>
2022-07-22dt-bindings: PCI: fsl,imx6q-pcie: Add missing type for 'reset-gpio-active-high'Rob Herring
'reset-gpio-active-high' is missing a type definition and is not a common property. The type is boolean. Signed-off-by: Rob Herring <robh@kernel.org> Acked-by: Richard Zhu <hongxing.zhu@nxp.com> Link: https://lore.kernel.org/r/20220719215031.1875860-1-robh@kernel.org
2022-07-22dt-bindings: PCI: xilinx-cpm: Add Versal CPM5 Root PortBharat Kumar Gogada
Xilinx Versal Premium series has CPM5 block which supports Root Port functionality at Gen5 speed. Add support for YAML schemas documentation for Versal CPM5 Root Port driver. Link: https://lore.kernel.org/r/20220705105646.16980-2-bharat.kumar.gogada@xilinx.com Signed-off-by: Bharat Kumar Gogada <bharat.kumar.gogada@xilinx.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Rob Herring <robh@kernel.org>
2022-07-15dt-bindings: PCI: qcom: Fix reset conditionalJohan Hovold
Fix the reset conditional which always evaluated to true due to a misspelled property name ("compatibles" in plural). Fixes: 6700a9b00f0a ("dt-bindings: PCI: qcom: Do not require resets on msm8996 platforms") Link: https://lore.kernel.org/r/20220629141000.18111-2-johan+linaro@kernel.org Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2022-07-15dt-bindings: PCI: qcom: Fix description typoBaruch Siach
Fix "based" typo in description. Link: https://lore.kernel.org/r/e08b53be6cdf8d94a5a002d5b74c8a884b2ff3c6.1655100158.git.baruch@tkos.co.il Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2022-06-23dt-bindings: PCI: renesas,pci-rcar-gen2: Add device tree support for R9A06G032Herve Codina
Add internal PCI bridge support for the R9A06G032 SOC. The Renesas RZ/N1D (R9A06G032) internal PCI bridge is compatible with the one present in the R-Car Gen2 family, but compared to R-Car Gen2, it needs three clocks instead of one. The 'resets' property is not required for the RZ/N1 family. Link: https://lore.kernel.org/r/20220520094155.313784-3-herve.codina@bootlin.com Signed-off-by: Herve Codina <herve.codina@bootlin.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Rob Herring <robh@kernel.org>
2022-06-23dt-bindings: PCI: pci-rcar-gen2: Convert bindings to json-schemaHerve Codina
Convert Renesas PCI bridge bindings documentation to json-schema. Link: https://lore.kernel.org/r/20220520094155.313784-2-herve.codina@bootlin.com Signed-off-by: Herve Codina <herve.codina@bootlin.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-06-15dt-bindings: PCI: mediatek: Add Airoha EN7532 supportJohn Crispin
Add a binding for Airoha EN7532, an ARM-based platform SoC integrating the same PCIe IP as MT7622. Link: https://lore.kernel.org/r/20220615125335.96089-1-nbd@nbd.name Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Rob Herring <robh@kernel.org>
2022-06-02dt-bindings: PCI: apple: Add missing 'power-domains' propertyRob Herring
The 'unevaluatedProperties' schema checks is not fully working and doesn't catch some cases where there's a $ref to another schema. A fix is pending, but results in new warnings in examples. The Apple PCIe host schema is missing 'power-domains' in the schema. The example has 3 power domains. However, this is wrong too as actual dts files have a single power domain and Sven confirmed 1 is correct. Cc: Sven Peter <sven@svenpeter.dev> Signed-off-by: Rob Herring <robh@kernel.org> Reviewed-by: Sven Peter <sven@svenpeter.dev> Link: https://lore.kernel.org/r/20220531215815.2408477-1-robh@kernel.org
2022-06-01dt-bindings: PCI: xilinx-cpm: Fix reg property orderBharat Kumar Gogada
All existing vendor DTSes are using "cpm_slcr" reg followed by "cfg" reg. This order is also suggested by node name which is pcie@fca10000 which suggests that cpm_slcr register should be the first. Driver itself is using devm_platform_ioremap_resource_byname() for both names that's why there is no functional change even on description which are using current order. But still prefer to change order to cover currently used description. Fixes: e22fadb1d014 ("PCI: xilinx-cpm: Add YAML schemas for Versal CPM Root Port") Signed-off-by: Bharat Kumar Gogada <bharat.kumar.gogada@xilinx.com> Reviewed-by: Michal Simek <michal.simek@amd.com> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220516102217.25960-1-bharat.kumar.gogada@xilinx.com
2022-05-31dt-bindings: PCI: socionext,uniphier-pcie: Add missing child interrupt ↵Rob Herring
controller The Socionext interrupt controller internal to the the PCI block isn't documented which causes warnings when unevaluatedProperties check is also fixed. Add the 'interrupt-controller' child node and properties and fixup the example so that interrupt properties can be parsed. Signed-off-by: Rob Herring <robh@kernel.org> Reviewed-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Link: https://lore.kernel.org/r/20220525210117.2489333-1-robh@kernel.org
2022-05-27Merge tag 'pci-v5.19-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull pci updates from Bjorn Helgaas: "Resource management: - Restrict E820 clipping to PCI host bridge windows (Bjorn Helgaas) - Log E820 clipping better (Bjorn Helgaas) - Add kernel cmdline options to enable/disable E820 clipping (Hans de Goede) - Disable E820 reserved region clipping for IdeaPads, Yoga, Yoga Slip, Acer Spin 5, Clevo Barebone systems where clipping leaves no usable address space for touchpads, Thunderbolt devices, etc (Hans de Goede) - Disable E820 clipping by default starting in 2023 (Hans de Goede) PCI device hotplug: - Include files to remove implicit dependencies (Christophe Leroy) - Only put Root Ports in D3 if they can signal and wake from D3 so AMD Yellow Carp doesn't miss hotplug events (Mario Limonciello) Power management: - Define pci_restore_standard_config() only for CONFIG_PM_SLEEP since it's unused otherwise (Krzysztof Kozlowski) - Power up devices completely, including anything platform firmware needs to do, during runtime resume (Rafael J. Wysocki) - Move pci_resume_bus() to PM callbacks so we observe the required bridge power-up delays (Rafael J. Wysocki) - Drop unneeded runtime_d3cold device flag (Rafael J. Wysocki) - Split pci_raw_set_power_state() between pci_power_up() and a new pci_set_low_power_state() (Rafael J. Wysocki) - Set current_state to D3cold if config read returns ~0, indicating the device is not accessible (Rafael J. Wysocki) - Do not call pci_update_current_state() from pci_power_up() so BARs and ASPM config are restored correctly (Rafael J. Wysocki) - Write 0 to PMCSR in pci_power_up() in all cases (Rafael J. Wysocki) - Split pci_power_up() to pci_set_full_power_state() to avoid some redundant operations (Rafael J. Wysocki) - Skip restoring BARs if device is not in D0 (Rafael J. Wysocki) - Rearrange and clarify pci_set_power_state() (Rafael J. Wysocki) - Remove redundant BAR restores from pci_pm_thaw_noirq() (Rafael J. Wysocki) Virtualization: - Acquire device lock before config space access lock to avoid AB/BA deadlock with sriov_numvfs_store() (Yicong Yang) Error handling: - Clear MULTI_ERR_COR/UNCOR_RCV bits, which a race could previously leave permanently set (Kuppuswamy Sathyanarayanan) Peer-to-peer DMA: - Whitelist Intel Skylake-E Root Ports regardless of which devfn they are (Shlomo Pongratz) ASPM: - Override L1 acceptable latency advertised by Intel DG2 so ASPM L1 can be enabled (Mika Westerberg) Cadence PCIe controller driver: - Set up device-specific register to allow PTM Responder to be enabled by the normal architected bit (Christian Gmeiner) - Override advertised FLR support since the controller doesn't implement FLR correctly (Parshuram Thombare) Cadence PCIe endpoint driver: - Correct bitmap size for the ob_region_map of outbound window usage (Dan Carpenter) Freescale i.MX6 PCIe controller driver: - Fix PERST# assertion/deassertion so we observe the required delays before accessing device (Francesco Dolcini) Freescale Layerscape PCIe controller driver: - Add "big-endian" DT property (Hou Zhiqiang) - Update SCFG DT property (Hou Zhiqiang) - Add "aer", "pme", "intr" DT properties (Li Yang) - Add DT compatible strings for ls1028a (Xiaowei Bao) Intel VMD host bridge driver: - Assign VMD IRQ domain before enumeration to avoid IOMMU interrupt remapping errors when MSI-X remapping is disabled (Nirmal Patel) - Revert VMD workaround that kept MSI-X remapping enabled when IOMMU remapping was enabled (Nirmal Patel) Marvell MVEBU PCIe controller driver: - Add of_pci_get_slot_power_limit() to parse the 'slot-power-limit-milliwatt' DT property (Pali Rohár) - Add mvebu support for sending Set_Slot_Power_Limit message (Pali Rohár) MediaTek PCIe controller driver: - Fix refcount leak in mtk_pcie_subsys_powerup() (Miaoqian Lin) MediaTek PCIe Gen3 controller driver: - Reset PHY and MAC at probe time (AngeloGioacchino Del Regno) Microchip PolarFlare PCIe controller driver: - Add chained_irq_enter()/chained_irq_exit() calls to mc_handle_msi() and mc_handle_intx() to avoid lost interrupts (Conor Dooley) - Fix interrupt handling race (Daire McNamara) NVIDIA Tegra194 PCIe controller driver: - Drop tegra194 MSI register save/restore, which is unnecessary since the DWC core does it (Jisheng Zhang) Qualcomm PCIe controller driver: - Add SM8150 SoC DT binding and support (Bhupesh Sharma) - Fix pipe clock imbalance (Johan Hovold) - Fix runtime PM imbalance on probe errors (Johan Hovold) - Fix PHY init imbalance on probe errors (Johan Hovold) - Convert DT binding to YAML (Dmitry Baryshkov) - Update DT binding to show that resets aren't required for MSM8996/APQ8096 platforms (Dmitry Baryshkov) - Add explicit register names per chipset in DT binding (Dmitry Baryshkov) - Add sc7280-specific clock and reset definitions to DT binding (Dmitry Baryshkov) Rockchip PCIe controller driver: - Fix bitmap size when searching for free outbound region (Dan Carpenter) Rockchip DesignWare PCIe controller driver: - Remove "snps,dw-pcie" from rockchip-dwc DT "compatible" property because it's not fully compatible with rockchip (Peter Geis) - Reset rockchip-dwc controller at probe (Peter Geis) - Add rockchip-dwc INTx support (Peter Geis) Synopsys DesignWare PCIe controller driver: - Return error instead of success if DMA mapping of MSI area fails (Jiantao Zhang) Miscellaneous: - Change pci_set_dma_mask() documentation references to dma_set_mask() (Alex Williamson)" * tag 'pci-v5.19-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (64 commits) dt-bindings: PCI: qcom: Add schema for sc7280 chipset dt-bindings: PCI: qcom: Specify reg-names explicitly dt-bindings: PCI: qcom: Do not require resets on msm8996 platforms dt-bindings: PCI: qcom: Convert to YAML PCI: qcom: Fix unbalanced PHY init on probe errors PCI: qcom: Fix runtime PM imbalance on probe errors PCI: qcom: Fix pipe clock imbalance PCI: qcom: Add SM8150 SoC support dt-bindings: pci: qcom: Document PCIe bindings for SM8150 SoC x86/PCI: Disable E820 reserved region clipping starting in 2023 x86/PCI: Disable E820 reserved region clipping via quirks x86/PCI: Add kernel cmdline options to use/ignore E820 reserved regions PCI: microchip: Fix potential race in interrupt handling PCI/AER: Clear MULTI_ERR_COR/UNCOR_RCV bits PCI: cadence: Clear FLR in device capabilities register PCI: cadence: Allow PTM Responder to be enabled PCI: vmd: Revert 2565e5b69c44 ("PCI: vmd: Do not disable MSI-X remapping if interrupt remapping is enabled by IOMMU.") PCI: vmd: Assign VMD IRQ domain before enumeration PCI: Avoid pci_dev_lock() AB/BA deadlock with sriov_numvfs_store() PCI: rockchip-dwc: Add legacy interrupt support ...
2022-05-24Merge branch 'pci/host/qcom'Bjorn Helgaas
- Add SM8150 SoC DT binding and support (Bhupesh Sharma) - Fix pipe clock imbalance (Johan Hovold) - Fix runtime PM imbalance on probe errors (Johan Hovold) - Fix PHY init imbalance on probe errors (Johan Hovold) - Convert DT binding to YAML (Dmitry Baryshkov) - Update DT binding to show that resets aren't required for MSM8996/APQ8096 platforms (Dmitry Baryshkov) - Add explicit register names per chipset in DT binding (Dmitry Baryshkov) - Add sc7280-specific clock and reset definitions to DT binding (Dmitry Baryshkov) * pci/host/qcom: dt-bindings: PCI: qcom: Add schema for sc7280 chipset dt-bindings: PCI: qcom: Specify reg-names explicitly dt-bindings: PCI: qcom: Do not require resets on msm8996 platforms dt-bindings: PCI: qcom: Convert to YAML PCI: qcom: Fix unbalanced PHY init on probe errors PCI: qcom: Fix runtime PM imbalance on probe errors PCI: qcom: Fix pipe clock imbalance PCI: qcom: Add SM8150 SoC support dt-bindings: pci: qcom: Document PCIe bindings for SM8150 SoC
2022-05-24Merge branch 'remotes/lorenzo/pci/layerscape'Bjorn Helgaas
- Add a "big-endian" DT property to indicate that the PEX_LUT and PF register blocks are implemented in big-endian (Hou Zhiqiang) - Add EP mode compatible strings for ls1028a (Xiaowei Bao) - Define DT properties for AER/PME interrupts (Li Yang) * remotes/lorenzo/pci/layerscape: dt-bindings: pci: layerscape-pci: define AER/PME interrupts dt-bindings: pci: layerscape-pci: Add EP mode compatible strings for ls1028a dt-bindings: pci: layerscape-pci: Update the description of SCFG property dt-bindings: pci: layerscape-pci: Add a optional property big-endian
2022-05-24dt-bindings: PCI: qcom: Add schema for sc7280 chipsetDmitry Baryshkov
Add support for sc7280-specific clock and reset definitions. Link: https://lore.kernel.org/r/20220506152107.1527552-5-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Rob Herring <robh@kernel.org>
2022-05-24dt-bindings: PCI: qcom: Specify reg-names explicitlyDmitry Baryshkov
Instead of specifying the enum of possible reg-names, specify them explicitly. This allows us to specify which chipsets need the "atu" regions and which do not. Also it clearly describes which platforms enumerate PCIe cores using the dbi region and which use parf region for that. Link: https://lore.kernel.org/r/20220506152107.1527552-4-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Rob Herring <robh@kernel.org>
2022-05-24dt-bindings: PCI: qcom: Do not require resets on msm8996 platformsDmitry Baryshkov
On MSM8996/APQ8096 platforms the PCIe controller doesn't have any resets. So move the requirement stanza under the corresponding if condition. Link: https://lore.kernel.org/r/20220506152107.1527552-3-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Rob Herring <robh@kernel.org>
2022-05-24dt-bindings: PCI: qcom: Convert to YAMLDmitry Baryshkov
Changes to the schema: - Fixed the ordering of clock-names/reset-names according to the dtsi files. - Mark vdda-supply as required only for apq/ipq8064 (as it was marked as generally required in the txt file). Changes to examples: - Inline clock and reset numbers rather than including dt-bindings files because of conflicts between the headers - Split ranges and reg properties to follow current practice - Change -gpio to -gpios - Update IRQ flags to LEVEL_HIGH rater than NONE - Removed extra "snps,dw-pcie" compatibility. Note: while it was not clearly described in text schema, the majority of Qualcomm platforms follow the snps,dw-pcie schema and use two compatibility strings in the DT files: platform-specific one and a fallback to the generic snps,dw-pcie one. However the platform itself is not compatible with the snps,dw-pcie interface, so we are going to remove it. Link: https://lore.kernel.org/r/20220506152107.1527552-2-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Rob Herring <robh@kernel.org>
2022-05-24dt-bindings: pci: qcom: Document PCIe bindings for SM8150 SoCBhupesh Sharma
Document the PCIe DT bindings for SM8150 SoC. The PCIe IP is similar to the one used on SM8250. Link: https://lore.kernel.org/r/20220326060810.1797516-2-bhupesh.sharma@linaro.org Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Rob Herring <robh@kernel.org> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
2022-05-23dt-bindings: Fix properties without any typeRob Herring
Now that the schema tools can extract type information for all properties (in order to decode dtb files), finding properties missing any type definition is fairly trivial though not yet automated. Fix the various property schemas which are missing a type. Most of these tend to be device specific properties which don't have a vendor prefix. A vendor prefix is how we normally ensure a type is defined. Signed-off-by: Rob Herring <robh@kernel.org> Acked-by: Sam Ravnborg <sam@ravnborg.org> # for everything in .../bindings/display/ Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Peter Rosin <peda@axentia.se> Acked-by: Bartosz Golaszewski <brgl@bgdev.pl> Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> Link: https://lore.kernel.org/r/20220519211411.2200720-1-robh@kernel.org
2022-05-11dt-bindings: PCI: Remove fallback from Rockchip DesignWare bindingPeter Geis
The snps,dw-pcie binds to a standalone driver. It is not fully compatible with the Rockchip implementation and causes a hang if it binds to the device. Remove this binding as a valid fallback. Link: https://lore.kernel.org/r/20220429123832.2376381-2-pgwipeout@gmail.com Signed-off-by: Peter Geis <pgwipeout@gmail.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Rob Herring <robh@kernel.org>
2022-05-09Merge branch 'dt/linus' into dt/nextRob Herring
Pick up new meta-schema fixes.
2022-05-04dt-bindings: pci: apple,pcie: Drop max-link-speed from exampleHector Martin
We no longer use these since 111659c2a570 (and they never worked anyway); drop them from the example to avoid confusion. Fixes: 111659c2a570 ("arm64: dts: apple: t8103: Remove PCIe max-link-speed properties") Signed-off-by: Hector Martin <marcan@marcan.st> Reviewed-by: Alyssa Rosenzweig <alyssa@rosenzweig.io> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220502091308.28233-1-marcan@marcan.st
2022-04-08dt-bindings: pci: layerscape-pci: define AER/PME interruptsLi Yang
Different platforms using this controller are using different numbers of interrupt lines and the routing of events to these interrupt lines are different too. So instead of trying to define names for these interrupt lines, we define the more specific AER/PME events that are routed to these interrupt lines. For platforms which only has a single interrupt line for miscellaneous controller events, we can keep using the original "intr" name for backward compatibility. Also change the example from ls1021a to ls1088a for better representation. Link: https://lore.kernel.org/r/20220311234938.8706-5-leoyang.li@nxp.com Signed-off-by: Li Yang <leoyang.li@nxp.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Rob Herring <robh@kernel.org>
2022-04-08dt-bindings: pci: layerscape-pci: Add EP mode compatible strings for ls1028aXiaowei Bao
Add EP mode compatible string for ls1028a. Link: https://lore.kernel.org/r/20220311234938.8706-4-leoyang.li@nxp.com Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com> Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Signed-off-by: Li Yang <leoyang.li@nxp.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Rob Herring <robh@kernel.org>
2022-04-08dt-bindings: pci: layerscape-pci: Update the description of SCFG propertyHou Zhiqiang
Update the description of the second entry of 'fsl,pcie-scfg' property, as the LS1043A PCIe controller also has some control registers in SCFG block, while it has 3 controllers. Link: https://lore.kernel.org/r/20220311234938.8706-3-leoyang.li@nxp.com Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Rob Herring <robh@kernel.org>
2022-04-08dt-bindings: pci: layerscape-pci: Add a optional property big-endianHou Zhiqiang
This property is to indicate the endianness when accessing the PEX_LUT and PF register block, so if these registers are implemented in big-endian, specify this property. Link: https://lore.kernel.org/r/20220311234938.8706-2-leoyang.li@nxp.com Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Rob Herring <robh@kernel.org>
2022-04-04dt-bindings: PCI: uniphier: Convert uniphier-pcie.txt to json-schemaKunihiko Hayashi
Convert the file into a JSON description at the yaml format. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/1648617814-9217-2-git-send-email-hayashi.kunihiko@socionext.com
2022-03-30Merge tag 'clk-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "There's one large change in the core clk framework here. We change how clk_set_rate_range() works so that the frequency is re-evaulated each time the rate is changed. Previously we wouldn't let clk providers see a rate that was different if it was still within the range, which could be bad for power if the clk could run slower when a range expands. Now the clk provider can decide to do something differently when the constraints change. This broke Nvidia's clk driver so we had to wait for the fix for that to bake a little more in -next. The rate range patch series also introduced a kunit suite for the clk framework that we're going to extend in the next release. It already made it easy to find corner cases in the rate range patches so I'm excited to see it cover more clk code and increase our confidence in core framework patches in the future. I also added a kunit test for the basic clk gate code and that work will continue to cover more basic clk types: muxes, dividers, etc. Beyond the core code we have the usual set of clk driver updates and additions. Qualcomm again dominates the diffstat here with lots more SoCs being supported and i.MX follows afer that with a similar number of SoCs gaining clk drivers. Beyond those large additions there's drivers being modernized to use clk_parent_data so we can move away from global string names for all the clks in an SoC. Finally there's lots of little fixes all over the clk drivers for typos, warnings, and missing clks that aren't critical and get batched up waiting for the next merge window to open. Nothing super big stands out in the driver pile. Full details are below. Core: - Make clk_set_rate_range() re-evaluate the limits each time - Introduce various clk_set_rate_range() tests - Add clk_drop_range() to drop a previously set range New Drivers: - i.MXRT1050 clock driver and bindings - i.MX8DXL clock driver and bindings - i.MX93 clock driver and bindings - NCO blocks on Apple SoCs - Audio clks on StarFive JH7100 RISC-V SoC - Add support for the new Renesas RZ/V2L SoC - Qualcomm SDX65 A7 PLL - Qualcomm SM6350 GPU clks - Qualcomm SM6125, SM6350, QCS2290 display clks - Qualcomm MSM8226 multimedia clks Updates: - Kunit tests for clk-gate implementation - Terminate arrays with sentinels and make that clearer - Cleanup SPDX tags - Fix typos in comments - Mark mux table as const in clk-mux - Make the all_lists array const - Convert Cirrus Logic CS2000P driver to regmap, yamlify DT binding and add support for dynamic mode - Clock configuration on Microchip PolarFire SoCs - Free allocations on probe error in Mediatek clk driver - Modernize Mediatek clk driver by consolidating code - Add watchdog (WDT), I2C, and pin function controller (PFC) clocks on Renesas R-Car S4-8 - Improve the clocks for the Rockchip rk3568 display outputs (parenting, pll-rates) - Use of_device_get_match_data() instead of open-coding on Rockchip rk3568 - Reintroduce the expected fractional-divider behaviour that disappeared with the addition of CLK_FRAC_DIVIDER_POWER_OF_TWO_PS - Remove SYS PLL 1/2 clock gates for i.MX8M* - Remove AUDIO MCLK ROOT from i.MX7D - Add fracn gppll clock type used by i.MX93 - Add new composite clock for i.MX93 - Add missing media mipi phy ref clock for i.MX8MP - Fix off by one in imx_lpcg_parse_clks_from_dt() - Rework for the imx pll14xx - sama7g5: One low priority fix for GCLK of PDMC - Add DMA engine (SYS-DMAC) clocks on Renesas R-Car S4-8 - Add MOST (MediaLB I/F) clocks on Renesas R-Car E3 and D3 - Add CAN-FD clocks on Renesas R-Car V3U - Qualcomm SC8280XP RPMCC - Add some missing clks on Qualcomm MSM8992/MSM8994/MSM8998 SoCs - Rework Qualcomm GCC bindings and convert SDM845 camera bindig to YAML - Convert various Qualcomm drivers to use clk_parent_data - Remove test clocks from various Qualcomm drivers - Crypto engine clks on Qualcomm IPQ806x + more freqs for SDCC/NSS - Qualcomm SM8150 EMAC, PCIe, UFS GDSCs - Better pixel clk frequency support on Qualcomm RCG2 clks" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (227 commits) clk: zynq: Update the parameters to zynq_clk_register_periph_clk clk: zynq: trivial warning fix clk: Drop the rate range on clk_put() clk: test: Test clk_set_rate_range on orphan mux clk: Initialize orphan req_rate dt-bindings: clock: drop useless consumer example dt-bindings: clock: renesas: Make example 'clocks' parsable clk: qcom: gcc-msm8994: Fix gpll4 width dt-bindings: clock: fix dt_binding_check error for qcom,gcc-other.yaml clk: rs9: Add Renesas 9-series PCIe clock generator driver clk: fixed-factor: Introduce devm_clk_hw_register_fixed_factor_index() clk: visconti: prevent array overflow in visconti_clk_register_gates() dt-bindings: clk: rs9: Add Renesas 9-series I2C PCIe clock generator clk: sifive: Move all stuff into SoCs header files from C files clk: sifive: Add SoCs prefix in each SoCs-dependent data riscv: dts: Change the macro name of prci in each device node dt-bindings: change the macro name of prci in header files and example clk: sifive: duplicate the macro definitions for the time being clk: qcom: sm6125-gcc: fix typos in comments clk: ti: clkctrl: fix typos in comments ...
2022-03-26Merge tag 'devicetree-for-5.18' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull devicetree updates from Rob Herring: - Add Krzysztof Kozlowski as co-maintainer for DT bindings providing much needed help. - DT schema validation now takes DTB files as input rather than intermediate YAML files. This decouples the validation from the source level syntax information. There's a bunch of schema fixes as a result of switching to DTB based validation which exposed some errors and incomplete schemas and examples. - Kbuild improvements to explicitly warn users running 'make dt_binding_check' on missing yamllint - Expand DT_SCHEMA_FILES kbuild variable to take just a partial filename or path instead of the full path to 1 file. - Convert various bindings to schema format: mscc,vsc7514-switch, multiple GNSS bindings, ahci-platform, i2c-at91, multiple UFS bindings, cortina,gemini-sata-bridge, cortina,gemini-ethernet, Atmel SHA, Atmel TDES, Atmel AES, armv7m-systick, Samsung Exynos display subsystem, nuvoton,npcm7xx-timer, samsung,s3c2410-i2c, zynqmp_dma, msm/mdp4, rda,8810pl-uart - New schemas for u-boot environment variable partition, TI clksel - New compatible strings for Renesas RZ/V2L SoC - Vendor prefixes for Xen, HPE, deprecated Synopsys, deprecated HiSilicon - Add/fix schemas for QEMU Arm 'virt' machine - Drop unused of_alias_get_alias_list() function - Add a script to check DT unittest EXPECT message output. Pass messages also now print by default at PR_INFO level to help test automation. * tag 'devicetree-for-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (96 commits) dt-bindings: kbuild: Make DT_SCHEMA_LINT a recursive variable dt-bindings: nvmem: add U-Boot environment variables binding dt-bindings: ufs: qcom: Add SM6350 compatible string dt-bindings: dmaengine: sifive,fu540-c000: include generic schema dt-bindings: gpio: pca95xx: drop useless consumer example Revert "of: base: Introduce of_alias_get_alias_list() to check alias IDs" dt-bindings: virtio,mmio: Allow setting devices 'dma-coherent' dt-bindings: gnss: Add two more chips dt-bindings: gnss: Rewrite sirfstar binding in YAML dt-bindings: gnss: Modify u-blox to use common bindings dt-bindings: gnss: Rewrite common bindings in YAML dt-bindings: ata: ahci-platform: Add rk3568-dwc-ahci compatible dt-bindings: ata: ahci-platform: Add power-domains property dt-bindings: ata: ahci-platform: Convert DT bindings to yaml dt-bindings: kbuild: Use DTB files for validation dt-bindings: kbuild: Pass DT_SCHEMA_FILES to dt-validate dt-bindings: Add QEMU virt machine compatible dt-bindings: arm: Convert QEMU fw-cfg to DT schema dt-bindings: i2c: at91: Add SAMA7G5 compatible strings list dt-bindings: i2c: convert i2c-at91 to json-schema ...
2022-03-22Merge branch 'remotes/lorenzo/pci/uniphier'Bjorn Helgaas
- Add DT binding and endpoint driver support for UniPhier NX1 SoC (Kunihiko Hayashi) * remotes/lorenzo/pci/uniphier: PCI: uniphier-ep: Add NX1 support PCI: uniphier-ep: Add SoC data structure dt-bindings: PCI: uniphier-ep: Add bindings for NX1 SoC
2022-03-22Merge branch 'remotes/lorenzo/pci/qcom'Bjorn Helgaas
- Save pointer to device match data instead of copying it (Dmitry Baryshkov) - Add ddrss_sf_tbu flag to device match data instead of checking OF compatible string (Dmitry Baryshkov) - Add SM8450 SoC PCIe DT bindings (Dmitry Baryshkov) - Add SM8450 PCIe support (Dmitry Baryshkov) * remotes/lorenzo/pci/qcom: PCI: qcom: Add SM8450 PCIe support PCI: qcom: Add ddrss_sf_tbu flag PCI: qcom: Remove redundancy between qcom_pcie and qcom_pcie_cfg dt-bindings: pci: qcom: Document PCIe bindings for SM8450
2022-03-15dt-bindings: change the macro name of prci in header files and exampleZong Li
We currently change the macro name for fu540 and fu740 by adding the prefix respectively, the dt-bindings should be modified as well. Signed-off-by: Zong Li <zong.li@sifive.com> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Palmer Dabbelt <palmer@rivosinc.com> Link: https://lore.kernel.org/r/f9284873c2993a9952d9fe4f8dd5e89f20daab75.1646388139.git.zong.li@sifive.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-03-10dt-bindings: imx6q-pcie: Add iMX8MP PCIe compatible stringRichard Zhu
Add i.MX8MP PCIe compatible string. Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/1646644054-24421-5-git-send-email-hongxing.zhu@nxp.com
2022-03-10dt-bindings: imx6q-pcie: Add iMX8MM PCIe compatible stringRichard Zhu
Add the i.MX8MM PCIe compatible string. Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/1646293805-18248-1-git-send-email-hongxing.zhu@nxp.com
2022-02-23dt-bindings: pci: qcom: Document PCIe bindings for SM8450Dmitry Baryshkov
Document the PCIe DT bindings for SM8450 SoC. The PCIe IP is similar to the one used on SM8250, however unlike SM8250, PCIe0 and PCIe1 use different set of clocks, so two compatible entries are required. Link: https://lore.kernel.org/r/20220223101435.447839-2-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com>
2022-02-22dt-bindings: PCI: mvebu: Update information about intx interruptsPali Rohár
Link: https://lore.kernel.org/r/20220222155030.988-10-pali@kernel.org Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Rob Herring <robh@kernel.org>
2022-02-22dt-bindings: PCI: mvebu: Add num-lanes propertyPali Rohár
Controller driver needs to correctly configure PCIe link if it contains 1 or 4 SerDes PCIe lanes. Therefore add a new 'num-lanes' DT property for mvebu PCIe controller. Property 'num-lanes' seems to be de-facto standard way how number of lanes is specified in other PCIe controllers. Link: https://lore.kernel.org/r/20220222155030.988-5-pali@kernel.org Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Rob Herring <robh@kernel.org>
2022-02-11dt-bindings: PCI: uniphier-ep: Add bindings for NX1 SoCKunihiko Hayashi
Update PCI endpoint binding document for UniPhier NX1 SoC. Add a compatible string, clock and reset lines for the SoC to the document. Link: https://lore.kernel.org/r/1644480596-20037-2-git-send-email-hayashi.kunihiko@socionext.com Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Rob Herring <robh@kernel.org>
2022-01-16Merge tag 'pci-v5.17-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull pci updates from Bjorn Helgaas: "Enumeration: - Use pci_find_vsec_capability() instead of open-coding it (Andy Shevchenko) - Convert pci_dev_present() stub from macro to static inline to avoid 'unused variable' errors (Hans de Goede) - Convert sysfs slot attributes from default_attrs to default_groups (Greg Kroah-Hartman) - Use DWORD accesses for LTR, L1 SS to avoid BayHub OZ711LV2 erratum (Rajat Jain) - Remove unnecessary initialization of static variables (Longji Guo) Resource management: - Always write Intel I210 ROM BAR on update to work around device defect (Bjorn Helgaas) PCIe native device hotplug: - Fix pciehp lockdep errors on Thunderbolt undock (Hans de Goede) - Fix infinite loop in pciehp IRQ handler on power fault (Lukas Wunner) Power management: - Convert amd64-agp, sis-agp, via-agp from legacy PCI power management to generic power management (Vaibhav Gupta) IOMMU: - Add function 1 DMA alias quirk for Marvell 88SE9125 SATA controller so it can work with an IOMMU (Yifeng Li) Error handling: - Add PCI_ERROR_RESPONSE and related definitions for signaling and checking for transaction errors on PCI (Naveen Naidu) - Fabricate PCI_ERROR_RESPONSE data (~0) in config read wrappers, instead of in host controller drivers, when transactions fail on PCI (Naveen Naidu) - Use PCI_POSSIBLE_ERROR() to check for possible failure of config reads (Naveen Naidu) Peer-to-peer DMA: - Add Logan Gunthorpe as P2PDMA maintainer (Bjorn Helgaas) ASPM: - Calculate link L0s and L1 exit latencies when needed instead of caching them (Saheed O. Bolarinwa) - Calculate device L0s and L1 acceptable exit latencies when needed instead of caching them (Saheed O. Bolarinwa) - Remove struct aspm_latency since it's no longer needed (Saheed O. Bolarinwa) APM X-Gene PCIe controller driver: - Fix IB window setup, which was broken by the fact that IB resources are now sorted in address order instead of DT dma-ranges order (Rob Herring) Apple PCIe controller driver: - Enable clock gating to save power (Hector Martin) - Fix REFCLK1 enable/poll logic (Hector Martin) Broadcom STB PCIe controller driver: - Declare bitmap correctly for use by bitmap interfaces (Christophe JAILLET) - Clean up computation of legacy and non-legacy MSI bitmasks (Florian Fainelli) - Update suspend/resume/remove error handling to warn about errors and not fail the operation (Jim Quinlan) - Correct the "pcie" and "msi" interrupt descriptions in DT binding (Jim Quinlan) - Add DT bindings for endpoint voltage regulators (Jim Quinlan) - Split brcm_pcie_setup() into two functions (Jim Quinlan) - Add mechanism for turning on voltage regulators for connected devices (Jim Quinlan) - Turn voltage regulators for connected devices on/off when bus is added or removed (Jim Quinlan) - When suspending, don't turn off voltage regulators for wakeup devices (Jim Quinlan) Freescale i.MX6 PCIe controller driver: - Add i.MX8MM support (Richard Zhu) Freescale Layerscape PCIe controller driver: - Use DWC common ops instead of layerscape-specific link-up functions (Hou Zhiqiang) Intel VMD host bridge driver: - Honor platform ACPI _OSC feature negotiation for Root Ports below VMD (Kai-Heng Feng) - Add support for Raptor Lake SKUs (Karthik L Gopalakrishnan) - Reset everything below VMD before enumerating to work around failure to enumerate NVMe devices when guest OS reboots (Nirmal Patel) Bridge emulation (used by Marvell Aardvark and MVEBU): - Make emulated ROM BAR read-only by default (Pali Rohár) - Make some emulated legacy PCI bits read-only for PCIe devices (Pali Rohár) - Update reserved bits in emulated PCIe Capability (Pali Rohár) - Allow drivers to emulate different PCIe Capability versions (Pali Rohár) - Set emulated Capabilities List bit for all PCIe devices, since they must have at least a PCIe Capability (Pali Rohár) Marvell Aardvark PCIe controller driver: - Add bridge emulation definitions for PCIe DEVCAP2, DEVCTL2, DEVSTA2, LNKCAP2, LNKCTL2, LNKSTA2, SLTCAP2, SLTCTL2, SLTSTA2 (Pali Rohár) - Add aardvark support for DEVCAP2, DEVCTL2, LNKCAP2 and LNKCTL2 registers (Pali Rohár) - Clear all MSIs at setup to avoid spurious interrupts (Pali Rohár) - Disable bus mastering when unbinding host controller driver (Pali Rohár) - Mask all interrupts when unbinding host controller driver (Pali Rohár) - Fix memory leak in host controller unbind (Pali Rohár) - Assert PERST# when unbinding host controller driver (Pali Rohár) - Disable link training when unbinding host controller driver (Pali Rohár) - Disable common PHY when unbinding host controller driver (Pali Rohár) - Fix resource type checking to check only IORESOURCE_MEM, not IORESOURCE_MEM_64, which is a flavor of IORESOURCE_MEM (Pali Rohár) Marvell MVEBU PCIe controller driver: - Implement pci_remap_iospace() for ARM so mvebu can use devm_pci_remap_iospace() instead of the previous ARM-specific pci_ioremap_io() interface (Pali Rohár) - Use the standard pci_host_probe() instead of the device-specific mvebu_pci_host_probe() (Pali Rohár) - Replace all uses of ARM-specific pci_ioremap_io() with the ARM implementation of the standard pci_remap_iospace() interface and remove pci_ioremap_io() (Pali Rohár) - Skip initializing invalid Root Ports (Pali Rohár) - Check for errors from pci_bridge_emul_init() (Pali Rohár) - Ignore any bridges at non-zero function numbers (Pali Rohár) - Return ~0 data for invalid config read size (Pali Rohár) - Disallow mapping interrupts on emulated bridges (Pali Rohár) - Clear Root Port Memory & I/O Space Enable and Bus Master Enable at initialization (Pali Rohár) - Make type bits in Root Port I/O Base register read-only (Pali Rohár) - Disable Root Port windows when base/limit set to invalid values (Pali Rohár) - Set controller to Root Complex mode (Pali Rohár) - Set Root Port Class Code to PCI Bridge (Pali Rohár) - Update emulated Root Port secondary bus numbers to better reflect the actual topology (Pali Rohár) - Add PCI_BRIDGE_CTL_BUS_RESET support to emulated Root Ports so pci_reset_secondary_bus() can reset connected devices (Pali Rohár) - Add PCI_EXP_DEVCTL Error Reporting Enable support to emulated Root Ports (Pali Rohár) - Add PCI_EXP_RTSTA PME Status bit support to emulated Root Ports (Pali Rohár) - Add DEVCAP2, DEVCTL2 and LNKCTL2 support to emulated Root Ports on Armada XP and newer devices (Pali Rohár) - Export mvebu-mbus.c symbols to allow pci-mvebu.c to be a module (Pali Rohár) - Add support for compiling as a module (Pali Rohár) MediaTek PCIe controller driver: - Assert PERST# for 100ms to allow power and clock to stabilize (qizhong cheng) MediaTek PCIe Gen3 controller driver: - Disable Mediatek DVFSRC voltage request since lack of DVFSRC to respond to the request causes failure to exit L1 PM Substate (Jianjun Wang) MediaTek MT7621 PCIe controller driver: - Declare mt7621_pci_ops static (Sergio Paracuellos) - Give pcibios_root_bridge_prepare() access to host bridge windows (Sergio Paracuellos) - Move MIPS I/O coherency unit setup from driver to pcibios_root_bridge_prepare() (Sergio Paracuellos) - Add missing MODULE_LICENSE() (Sergio Paracuellos) - Allow COMPILE_TEST for all arches (Sergio Paracuellos) Microsoft Hyper-V host bridge driver: - Add hv-internal interfaces to encapsulate arch IRQ dependencies (Sunil Muthuswamy) - Add arm64 Hyper-V vPCI support (Sunil Muthuswamy) Qualcomm PCIe controller driver: - Undo PM setup in qcom_pcie_probe() error handling path (Christophe JAILLET) - Use __be16 type to store return value from cpu_to_be16() (Manivannan Sadhasivam) - Constify static dw_pcie_ep_ops (Rikard Falkeborn) Renesas R-Car PCIe controller driver: - Fix aarch32 abort handler so it doesn't check the wrong bus clock before accessing the host controller (Marek Vasut) TI Keystone PCIe controller driver: - Add register offset for ti,syscon-pcie-id and ti,syscon-pcie-mode DT properties (Kishon Vijay Abraham I) MicroSemi Switchtec management driver: - Add Gen4 automotive device IDs (Kelvin Cao) - Declare state_names[] as static so it's not allocated and initialized for every call (Kelvin Cao) Host controller driver cleanups: - Use of_device_get_match_data(), not of_match_device(), when we only need the device data in altera, artpec6, cadence, designware-plat, dra7xx, keystone, kirin (Fan Fei) - Drop pointless of_device_get_match_data() cast in j721e (Bjorn Helgaas) - Drop redundant struct device * from j721e since struct cdns_pcie already has one (Bjorn Helgaas) - Rename driver structs to *_pcie in intel-gw, iproc, ls-gen4, mediatek-gen3, microchip, mt7621, rcar-gen2, tegra194, uniphier, xgene, xilinx, xilinx-cpm for consistency across drivers (Fan Fei) - Fix invalid address space conversions in hisi, spear13xx (Bjorn Helgaas) Miscellaneous: - Sort Intel Device IDs by value (Andy Shevchenko) - Change Capability offsets to hex to match spec (Baruch Siach) - Correct misspellings (Krzysztof Wilczyński) - Terminate statement with semicolon in pci_endpoint_test.c (Ming Wang)" * tag 'pci-v5.17-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (151 commits) PCI: mt7621: Allow COMPILE_TEST for all arches PCI: mt7621: Add missing MODULE_LICENSE() PCI: mt7621: Move MIPS setup to pcibios_root_bridge_prepare() PCI: Let pcibios_root_bridge_prepare() access bridge->windows PCI: mt7621: Declare mt7621_pci_ops static PCI: brcmstb: Do not turn off WOL regulators on suspend PCI: brcmstb: Add control of subdevice voltage regulators PCI: brcmstb: Add mechanism to turn on subdev regulators PCI: brcmstb: Split brcm_pcie_setup() into two funcs dt-bindings: PCI: Add bindings for Brcmstb EP voltage regulators dt-bindings: PCI: Correct brcmstb interrupts, interrupt-map. PCI: brcmstb: Fix function return value handling PCI: brcmstb: Do not use __GENMASK PCI: brcmstb: Declare 'used' as bitmap, not unsigned long PCI: hv: Add arm64 Hyper-V vPCI support PCI: hv: Make the code arch neutral by adding arch specific interfaces PCI: pciehp: Use down_read/write_nested(reset_lock) to fix lockdep errors x86/PCI: Remove initialization of static variables to false PCI: Use DWORD accesses for LTR, L1 SS to avoid erratum misc: pci_endpoint_test: Terminate statement with semicolon ...
generated by cgit (git 2.34.1) at 2025-04-18 04:35:53 +0000