Age | Commit message (Collapse) | Author |
|
Pull ARM SoC DT updates from Arnd Bergmann:
"This is a rather large update for the ARM devicetree files, after a
few quieter releases, with 775 total commits and 47 branches pulled
into this one.
There are 5 new SoC types plus some minor variations, and a total of
60 new machines, so I'm limiting the summary to the main noteworthy
items:
- Apple M1 gain support for PCI and pinctrl, getting a bit closer to
a usable system out of the box.
- Qualcomm gains support for Snapdragon 690 (aka SM6350) as well as
SM7225, 11 new smartphones, and three additional Chromebooks, and
improvements all over the place.
- Samsung gains support for ExynosAutov9, an automotive version of
their smartphone SoC, but otherwise no major changes.
- Microchip adds the SAMA5D29 SoC in the SAMA5 family, and a number
of improvements for the recently added SAMA7 family. The LAN966 SoC
that was added in the platform code does not have dts files yet.
Two board files are added for the older at91sam9g20 SoC
- Aspeed supports two additional server boards using their AST2600 as
BMC, and improves support for qemu models
- Rockchip RK3566/RK3688 gets added, along with six new development
boards using RK3328/RK3399/RK3566, and one Chromebook tablet.
- Two NAS boxes are added using the ARMv4 based Gemini platform
- One new board is added to the Intel Arria SoC FPGA family
- Marvell adds one network switch based on Armada 381 and the new
MOCHAbin 7040 development board
- NXP adds support for the S32G2 automotive SoC, two imx6 based ebook
readers, and three additional development boards, which is notably
less than their usual additions, but they also gain improvements to
their many existing boards
- STmicroelectronics adds their stm32mp13 SoC family along with a
reference board
- Renesas adds new versions of their R-Car Gen3 SoCs and many updates
for their older generations
- Broadcom adds support for a number of Cisco Meraki wireless
controllers, along with two new boards and other updates for
BCM53xx/BCM47xx networking SoCs and the Raspberry Pi boards
- Mediatek improves support for the MT81xx SoCs used in Chromebooks
as well as the MT76xx networking SoCs
- NVIDIA adds a number of cleanups and additional support for more
hardware on the already supported machines
- TI K3 adds support for three new boards along with cleanups
- Toshiba adds one board for the Visconti family
- Xilinx adds five new ZynqMP based machines
- Amlogic support is added for the Radxa Zero and two Jethub home
automation controllers, along with changes to other machines
- Rob Herring continues his work on fixing dtc warnings all over the
tree.
- Minor updates for TI OMAP, Mstar, Allwinner/sunxi, Hisilicon,
Ux500, Unisoc"
* tag 'dt-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (720 commits)
arm64: dts: apple: j274: Expose PCI node for the Ethernet MAC address
arm64: dts: apple: t8103: Add root port interrupt routing
arm64: dts: apple: t8103: Add PCIe DARTs
arm64: apple: Add PCIe node
arm64: apple: Add pinctrl nodes
ARM: dts: arm: Update ICST clock nodes 'reg' and node names
ARM: dts: arm: Update register-bit-led nodes 'reg' and node names
arm64: dts: exynos: add chipid node for exynosautov9 SoC
ARM: dts: qcom: fix typo in IPQ8064 thermal-sensor node
Revert "arm64: dts: qcom: msm8916-asus-z00l: Add sensors"
arm64: dts: qcom: ipq6018: Remove unused 'iface_clk' property from dma-controller node
arm64: dts: qcom: ipq6018: Remove unused 'qcom,config-pipe-trust-reg' property
arm64: dts: qcom: sm8350: Add CPU topology and idle-states
arm64: dts: qcom: Drop unneeded extra device-specific includes
arm64: dts: qcom: msm8916: Drop standalone smem node
arm64: dts: qcom: Fix node name of rpm-msg-ram device nodes
arm64: dts: qcom: msm8916-asus-z00l: Add sensors
arm64: dts: qcom: msm8916-asus-z00l: Add SDCard
arm64: dts: qcom: msm8916-asus-z00l: Add touchscreen
arm64: dts: qcom: sdm845-oneplus: remove devinfo-size from ramoops node
...
|
|
|
|
|
|
This patch adds document for mt8195 board with mt6359, rt1011 and rt5682
Signed-off-by: Trevor Wu <trevor.wu@mediatek.com>
Link: https://lore.kernel.org/r/20211020071428.14297-3-trevor.wu@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This swaps the descriptions of the 0 and 1 values to match
what the driver actually does with this property.
The background here is somewhat confusing. The codec has two
invert bits for the tip sense. The DT property should have been
for the TIP_SENSE_INV bit, which is the one that controls the
detect block. Due to some misunderstanding of the hardware the
driver actually implemented setting of the TS_INV bit, which is
only for swapping the sense of the interrupt bits. The description
was taken from the datasheet and refers to TIP_SENSE_INV but
unfortunately TS_INV has a different purpose and the net effect
of changing it is the reverse of what was intended (this is not
clearly described in the datasheet). So the ts-inv settings have
always done the exact opposite of what the description said.
Given the age of the driver, it's too late now to swap the meanings
of the values, so the description is changed to match the behaviour.
They have been annotated with the terminology used in the datasheet
to avoid the confusion of which one corresponds to what the datasheet
calls "inverted tip sense".
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: da16c5579353 ("ASoC: cs42l42: Add devicetree bindings for CS42L42")
Link: https://lore.kernel.org/r/20211028140902.11786-2-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
add initial bindings for max98520 audio amplifier
Signed-off-by: George Song <george.song@maximintegrated.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211027001431.363-1-george.song@maximintegrated.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Fixes the schema check warning "audio-controller@32000: 'AVDD-supply'
do not match any of the regexes: 'pinctrl-[0-9]+'"
Fixes: 5c36abcd2621 ("ASoC: meson: add t9015 internal codec binding documentation")
Reviewed-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Alexander Stein <alexander.stein@mailbox.org>
Link: https://lore.kernel.org/r/20211026182754.900688-1-alexander.stein@mailbox.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Mandadapu <srivasam@codeaurora.org>:
This patch set is to add support for lpass sc7280 based targets.
Upadate compatible name and change of bulk clock voting to optional
clock voting in digital codecs va, rx, tx macro drivers.
Changes Since V3:
-- Removed fixes tag.
-- Change signedoff by sequence.
Changes Since V2:
-- Add Tx macro deafults for lpass sc7280
Changes Since V1:
-- Removed individual clock voting and used bulk clock optional.
-- Removed volatile changes and fixed default values.
-- Typo errors.
Srinivasa Rao Mandadapu (5):
ASoC: qcom: Add compatible names in va,wsa,rx,tx codec drivers for
sc7280
ASoC: qcom: dt-bindings: Add compatible names for lpass sc7280 digital
codecs
ASoC: codecs: tx-macro: Enable tx top soundwire mic clock
ASoC: codecs: tx-macro: Update tx default values
ASoC: codecs: Change bulk clock voting to optional voting in digital
codecs
.../bindings/sound/qcom,lpass-rx-macro.yaml | 4 +++-
.../bindings/sound/qcom,lpass-tx-macro.yaml | 4 +++-
.../bindings/sound/qcom,lpass-va-macro.yaml | 4 +++-
.../bindings/sound/qcom,lpass-wsa-macro.yaml | 4 +++-
sound/soc/codecs/lpass-rx-macro.c | 3 ++-
sound/soc/codecs/lpass-tx-macro.c | 25 +++++++++++++++++++---
sound/soc/codecs/lpass-va-macro.c | 3 ++-
sound/soc/codecs/lpass-wsa-macro.c | 1 +
8 files changed, 39 insertions(+), 9 deletions(-)
--
Qualcomm India Private Limited, on behalf of Qualcomm Innovation Center, Inc.,
is a member of Code Aurora Forum, a Linux Foundation Collaborative Project.
|
|
On AudioReach audio Framework, Audio Streams (PCM/Compressed) are managed by
Q6APM(Audio Process Manager) service. This patch adds bindings for this DAIs
exposed by the DSP.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211026111655.1702-9-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
On AudioReach audio Framework access to LPASS ports is via Q6PRM
(Proxy Resource Manager) service, so add a dedicated lpass-clock compatible
string for this.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211026111655.1702-8-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
on AudioReach audio Framework access to LPASS ports is via
Q6APM(Audio Process Manager) service, so add a dedicated compatible
string for this.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211026111655.1702-7-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
q6afe (Audio Front End) is one of the DSP service that handles both
LPASS (Low Power Audio SubSystem) Audio ports and LPASS clocks.
As LPASS is a hardwware IP and commonly used by Qualcomm Audio DSP.
In order to allow multiple DSP frameworks to use these bindings
its best to move it out from the dsp specific bindings.
For compatibility reasons and not breaking which is already working
we still maintain same compatible string "qcom,q6afe-clocks"
Also as part of this change convert these LPASS clocks related bindings
into yaml format.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211026111655.1702-3-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
q6afe (Audio Front End) is one of the DSP service that handles both
LPASS (Low Power Audio SubSystem) Audio ports and LPASS clocks.
As LPASS is a hardwware IP and commonly used by Qualcomm Audio DSP.
In order to allow multiple DSP frameworks to use these bindings
its best to move it out from the dsp specific bindings.
For compatibility reasons and not breaking which is already working
we still maintain same compatible string "qcom,q6afe-dais"
Also as part of this change convert these LPASS dai related bindings
into yaml format.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211026111655.1702-2-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Update compatible names in va, wsa, rx and tx macro codes for lpass sc7280
Signed-off-by: Srinivasa Rao Mandadapu <srivasam@codeaurora.org>
Co-developed-by: Venkata Prasad Potturu <potturu@codeaurora.org>
Signed-off-by: Venkata Prasad Potturu <potturu@codeaurora.org>
Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/1635234188-7746-3-git-send-email-srivasam@codeaurora.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Convert the Wolfson WM8962 Ultra-Low Power Stereo CODEC Device Tree
binding documentation to json-schema.
Add missing *-supply and port properties.
Update the example.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/b0868d2f62fd57499c79d96298e99e5f9e4fbc76.1634565154.git.geert+renesas@glider.be
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Commit f07c776f6d7e ("arm64: dts: mediatek: Move reset controller
constants into common location") moves the reset controller headers.
However, it forgot to rename the DT example in mt8192-afe-pcm.yaml.
Renames the DT example to pass dt_binding_check.
Fixes: f07c776f6d7e ("arm64: dts: mediatek: Move reset controller constants into common location")
Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20211018101608.3818840-1-tzungbi@google.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This property was only needed for a driver hack, which we can
remove. Since the bindings were not in any kernel release yet, we
are able to just drop the property instead of silently accepting
and ignoring it.
Signed-off-by: Nicolas Frattaroli <frattaroli.nicolas@gmail.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Message-Id: <20211016105354.116513-3-frattaroli.nicolas@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This patch adds Audio Graph Card2 Yaml Document to Linux.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87wnmilu43.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This patch adds test-component sound device YAML bindings.
It can be used for Sound Test/Debug.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/878ryyn8s4.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
make dt_binding_check:
Documentation/devicetree/bindings/sound/rockchip,i2s-tdm.yaml: properties:rockchip,i2s-rx-route: {'required': ['maxItems']} is not allowed for {'$ref': '/schemas/types.yaml#/definitions/uint32-array', 'description': 'Defines the mapping of I2S RX sdis to I2S data bus lines. By default, they are mapped one-to-one. rockchip,i2s-rx-route = <3> would mean sdi3 is receiving from data0.', 'maxItems': 4, 'items': [{'enum': [0, 1, 2, 3]}]}
hint: "maxItems" is not needed with an "items" list
from schema $id: http://devicetree.org/meta-schemas/items.yaml#
Documentation/devicetree/bindings/sound/rockchip,i2s-tdm.yaml: properties:rockchip,i2s-tx-route: {'required': ['maxItems']} is not allowed for {'$ref': '/schemas/types.yaml#/definitions/uint32-array', 'description': 'Defines the mapping of I2S TX sdos to I2S data bus lines. By default, they are mapped one-to-one. rockchip,i2s-tx-route = <3> would mean sdo3 is sending to data0.', 'maxItems': 4, 'items': [{'enum': [0, 1, 2, 3]}]}
hint: "maxItems" is not needed with an "items" list
from schema $id: http://devicetree.org/meta-schemas/items.yaml#
Drop the "-" from the enums to fix this.
Fixes: 510f1c133aedcf69 ("ASoC: dt-bindings: rockchip: add i2s-tdm bindings")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/606809e10db02f92b1e7f90c491cc72dd8e16f79.1634132907.git.geert+renesas@glider.be
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add initial bindings for Richtek rt9120 audio amplifier.
Signed-off-by: ChiYuan Huang <cy_huang@richtek.com>
Link: https://lore.kernel.org/r/1634088519-995-2-git-send-email-u0084500@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This drops the rt9210 support due to a race with a new version being
sent out for some incremental changes.
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
<u0084500@gmail.com>
ChiYuan Huang <cy_huang@richtek.com>:
From: ChiYuan Huang <cy_huang@richtek.com>
This patch series Add the Richtek RT9120 support.
In v3:
- Add dvdd regulator binding to check the dvdd voltage domain.
- Refine sdo_select_text.
- Use switch case in 'internal_power_event' function.
- Remove the volume and mute initially write in component probe.
- Remove the mute API. It's no need by HW design.
In v2:
- Add missing #sound-dai-cells property.
ChiYuan Huang (2):
ASoC: dt-bindings: rt9120: Add initial bindings
ASoC: rt9120: Add rt9210 audio amplifier support
.../devicetree/bindings/sound/richtek,rt9120.yaml | 59 +++
sound/soc/codecs/Kconfig | 10 +
sound/soc/codecs/Makefile | 2 +
sound/soc/codecs/rt9120.c | 489 +++++++++++++++++++++
4 files changed, 560 insertions(+)
create mode 100644 Documentation/devicetree/bindings/sound/richtek,rt9120.yaml
create mode 100644 sound/soc/codecs/rt9120.c
--
2.7.4
|
|
The document was merged as commit 1afc60e00de3 ("dt-bindings:
mediatek: mt8192: add audio afe document").
However, [1] revealed that the commit 1afc60e00de3 breaks
dt_binding_check due to dt-bindings/clock/mt8192-clk.h doesn't
exist.
As a temporary fix, commit 7d94ca3c8acd ("ASoC: mt8192: revert
add audio afe document") reverted commit 1afc60e00de3.
dt-bindings/clock/mt8192-clk.h is in mainline per commit
f35f1a23e0e1 ("clk: mediatek: Add dt-bindings of MT8192 clocks").
Re-adds the document back.
[1]: https://mailman.alsa-project.org/pipermail/alsa-devel/2020-November/176873.html
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Message-Id: <20211008025523.1852319-1-tzungbi@google.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add initial bindings for Richtek rt9120 audio amplifier.
Signed-off-by: ChiYuan Huang <cy_huang@richtek.com>
Message-Id: <1633668612-25524-2-git-send-email-u0084500@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
<atafalla@dnyon.com>:
The max98927 codec on some devices (i.e. Xiaomi Mi A2 Lite phone) requires
hardware-resetting the codec by driving a reset-gpio. This series adds
support for it through an optional reset-gpios property.
v4:
* Correctly assert/deassert the GPIO states
* Wait for the i2c port to be ready after reset
* Reset device when removed
v3:
* Fix indentation on the dev_err_probe line
v2:
* Use dev_err_probe instead of dev_err
Alejandro Tafalla (2):
ASoC: max98927: Handle reset gpio when probing i2c
dt-bindings: sound: max98927: Add reset-gpios optional property
.../devicetree/bindings/sound/max9892x.txt | 3 +++
sound/soc/codecs/max98927.c | 25 +++++++++++++++++++
sound/soc/codecs/max98927.h | 1 +
3 files changed, 29 insertions(+)
--
2.33.0
|
|
This adds the YAML bindings for the Rockchip I2S/TDM audio driver.
Signed-off-by: Nicolas Frattaroli <frattaroli.nicolas@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211001171531.178775-3-frattaroli.nicolas@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Signed-off-by: Alejandro Tafalla <atafalla@dnyon.com>
Link: https://lore.kernel.org/r/5004d52da527bf1dd9e5b17e20b2ce50a0b57b5a.1633572679.git.atafalla@dnyon.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
To eliminate FIXME, add descriptions of what each port number is
associated with.
Cc: Rob Herring <robh@kernel.org>
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Link: https://lore.kernel.org/r/1633313546-23258-1-git-send-email-hayashi.kunihiko@socionext.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The driver is for codec NAU88L21 of Nuvoton Technology Corporation.
The NAU88L21 is an ultra-low power high performance audio codec that
supports both analog and digital audio functions.
Signed-off-by: Seven Lee <wtli@nuvoton.com>
Link: https://lore.kernel.org/r/20211001103108.3297848-1-wtli@nuvoton.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Fix the device-tree schema errors that be reported by using 'make
dt_binding_check'.
Signed-off-by: Derek Fang <derek.fang@realtek.com>
Link: https://lore.kernel.org/r/20210929130406.24325-1-derek.fang@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
According to the WM8978 datasheet, the address of the device is fixed as
0011010 in 2-wire mode.
Fixes: 5bd5699c494f42a3 ("ASoC: dt-bindings: Add WM8978 Binding")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/c99fc865e3fca6ea623661c52de7dc6a3c36c8b4.1632487554.git.geert+renesas@glider.be
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This patch fixes two spelling typos in qcom,q6afe.txt
and qcom,q6asm.txt
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Link: https://lore.kernel.org/r/20210924070044.569541-1-standby24x7@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
commit 82d3ec1d89fa ("ASoC: Use schema reference for sound-name-prefix")
added name-prefix.yaml schema and the same reference was used in couple
of other schemas. But this is causing following warning and the same is
fixed in current patch.
Documentation/devicetree/bindings/sound/nxp,tfa989x.example.dt.yaml:
audio-codec@34: 'sound-name-prefix' does not match any of the regexes:
'pinctrl-[0-9]+'
From schema: Documentation/devicetree/bindings/sound/nxp,tfa989x.yaml
Documentation/devicetree/bindings/sound/nxp,tfa989x.example.dt.yaml:
audio-codec@36: 'sound-name-prefix' does not match any of the regexes:
'pinctrl-[0-9]+'
From schema: Documentation/devicetree/bindings/sound/nxp,tfa989x.yaml
Fixes: 82d3ec1d89fa ("ASoC: Use schema reference for sound-name-prefix")
Reported-by: Rob Herring <robh+dt@kernel.org>
Suggested-by: Rob Herring <robh+dt@kernel.org>
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Link: https://lore.kernel.org/r/1632238860-16947-1-git-send-email-spujar@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Pujar <spujar@nvidia.com>:
Earlier as part of series [0], support for ADMAIF and I/O modules (such
as I2S, DMIC and DSPK) was added. This series aims at exposing some of
the AHUB internal modules (listed below), which can be used for audio
pre or post processing.
* SFC (Sampling Frequency Converter)
* MVC (Master Volume Control)
* AMX (Audio Multiplexer)
* ADX (Audio Demultiplexer)
* Mixer
These modules can be plugged into audio paths and relevant processing
can be done. The MUX routes are extended to allow add or remove above
modules in the path via mixer controls. This is similar to how specific
ADMAIF channels are connected to relevant I/O module instances at the
moment.
Some of these modules can alter PCM parameters. Consider example of
resampler (44.1 -> 48 kHz) in the path.
aplay(44.1 kHz) -> ADMAIF -> SFC -> (48 kHz) I2S -> (48kHz) Codec
The modules following SFC should be using converted sample rate and DAIs
need to be configured accordingly. The audio-graph driver provides a
mechanism to fixup the new parameters which can be specified in DT for a
given DAI. Then core uses these new values via fixup callback and then
pass it to respective DAIs hw_param() callback. The "convert-rate",
described in [1], property can be used when there is rate conversion in
the audio path. Similarly "convert-channels" can be used when there is
channel conversion in the path. There is no "convert-xxx" property for
sample size conversions. It can be added if necessary.
[0] https://www.lkml.org/lkml/2020/7/21/1357
[1] Documentation/devicetree/bindings/sound/audio-graph-port.yaml
Changelog
=========
v1 -> v2
--------
* Put comments for soft reset application in the drivers.
* Split out mute/volume control logic in put() calls of MVC driver and
use separate callbacks for the respective kcontrols.
* Update kcontrol put() callback in MVC driver to return 1 whenever
there is change. Similar change is done in other drivers too.
* Use name-prefix.yaml reference for the driver documentation now.
* Add sound-name-prefix pattern for MIXER driver and use prefix
accordingly in DT.
Sameer Pujar (13):
ASoC: soc-pcm: Don't reconnect an already active BE
ASoC: simple-card-utils: Increase maximum DAI links limit to 512
ASoC: audio-graph: Fixup CPU endpoint hw_params in a BE<->BE link
ASoC: dt-bindings: tegra: Few more Tegra210 AHUB modules
ASoC: tegra: Add routes for few AHUB modules
ASoC: tegra: Add Tegra210 based MVC driver
ASoC: tegra: Add Tegra210 based SFC driver
ASoC: tegra: Add Tegra210 based AMX driver
ASoC: tegra: Add Tegra210 based ADX driver
ASoC: tegra: Add Tegra210 based Mixer driver
arm64: defconfig: Enable few Tegra210 based AHUB drivers
arm64: tegra: Add few AHUB devices for Tegra210 and later
arm64: tegra: Extend APE audio support on Jetson platforms
.../bindings/sound/nvidia,tegra210-adx.yaml | 76 +
.../bindings/sound/nvidia,tegra210-ahub.yaml | 20 +
.../bindings/sound/nvidia,tegra210-amx.yaml | 76 +
.../bindings/sound/nvidia,tegra210-mixer.yaml | 74 +
.../bindings/sound/nvidia,tegra210-mvc.yaml | 76 +
.../bindings/sound/nvidia,tegra210-sfc.yaml | 73 +
arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts | 1554 ++++++++-
arch/arm64/boot/dts/nvidia/tegra186.dtsi | 120 +
arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts | 1493 +++++++-
.../arm64/boot/dts/nvidia/tegra194-p3509-0000.dtsi | 1520 ++++++++-
arch/arm64/boot/dts/nvidia/tegra194.dtsi | 116 +
arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts | 876 +++++
arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts | 876 +++++
arch/arm64/boot/dts/nvidia/tegra210.dtsi | 77 +
arch/arm64/configs/defconfig | 5 +
include/sound/simple_card_utils.h | 2 +-
sound/soc/generic/audio-graph-card.c | 4 +-
sound/soc/soc-pcm.c | 4 +
sound/soc/tegra/Kconfig | 48 +
sound/soc/tegra/Makefile | 10 +
sound/soc/tegra/tegra210_adx.c | 531 +++
sound/soc/tegra/tegra210_adx.h | 72 +
sound/soc/tegra/tegra210_ahub.c | 511 ++-
sound/soc/tegra/tegra210_amx.c | 600 ++++
sound/soc/tegra/tegra210_amx.h | 93 +
sound/soc/tegra/tegra210_mixer.c | 674 ++++
sound/soc/tegra/tegra210_mixer.h | 100 +
sound/soc/tegra/tegra210_mvc.c | 645 ++++
sound/soc/tegra/tegra210_mvc.h | 117 +
sound/soc/tegra/tegra210_sfc.c | 3549 ++++++++++++++++++++
sound/soc/tegra/tegra210_sfc.h | 78 +
31 files changed, 13647 insertions(+), 423 deletions(-)
create mode 100644 Documentation/devicetree/bindings/sound/nvidia,tegra210-adx.yaml
create mode 100644 Documentation/devicetree/bindings/sound/nvidia,tegra210-amx.yaml
create mode 100644 Documentation/devicetree/bindings/sound/nvidia,tegra210-mixer.yaml
create mode 100644 Documentation/devicetree/bindings/sound/nvidia,tegra210-mvc.yaml
create mode 100644 Documentation/devicetree/bindings/sound/nvidia,tegra210-sfc.yaml
create mode 100644 sound/soc/tegra/tegra210_adx.c
create mode 100644 sound/soc/tegra/tegra210_adx.h
create mode 100644 sound/soc/tegra/tegra210_amx.c
create mode 100644 sound/soc/tegra/tegra210_amx.h
create mode 100644 sound/soc/tegra/tegra210_mixer.c
create mode 100644 sound/soc/tegra/tegra210_mixer.h
create mode 100644 sound/soc/tegra/tegra210_mvc.c
create mode 100644 sound/soc/tegra/tegra210_mvc.h
create mode 100644 sound/soc/tegra/tegra210_sfc.c
create mode 100644 sound/soc/tegra/tegra210_sfc.h
--
2.7.4
|
|
Correct several errors in rt5682s dtschema:
1. The examples should be under "examples":
'example' is not one of ['$id', '$schema', 'title', 'description', 'examples', ...
2. Missing type for vendor properties
3. clock-names should be an array:
properties:clock-names:items: {'const': 'mclk'} is not of type 'array'
4. Example DTS should include headers:
[scripts/Makefile.lib:386: Documentation/devicetree/bindings/sound/realtek,rt5682s.example.dt.yaml] Error 1
5. Node name in example DTS misses unit address and does not match DT
convention (generic name):
Warning (reg_format): /example-0/rt5682s:reg: property has invalid length (4 bytes) (#address-cells == 1, #size-cells == 1)
6. Node address should be in size-cells:0 block in example DTS:
Warning (reg_format): /example-0/codec@1a:reg: property has invalid length (4 bytes) (#address-cells == 1, #size-cells == 1)
Fixes: 50159fdb144b ("ASoC: dt-bindings: rt5682s: add bindings for rt5682s")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20210920112106.140918-1-krzysztof.kozlowski@canonical.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This patch adds YAML schema for DT bindings of few AHUB modules.
These devices will be registered as ASoC components and bindings
will be used on Tegra210 and later chips. The bindings for below
mentioned modules are added:
* SFC (Sampling Frequency Converter)
* MVC (Master Volume Control)
* AMX (Audio Multiplexer)
* ADX (Audio Demultiplexer)
* Mixer
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Cc: Rob Herring <robh+dt@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/1631551342-25469-5-git-send-email-spujar@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Fix warnings and errors in DT bindings
Add newline at end of file
Replace 'unevaluatedProperties' with 'additionalProperties'
Add spi context to DT example
Add #sound-dai-cells to DT example
Rename to 'cirrus,cs35l41.yaml'
Signed-off-by: David Rhodes <drhodes@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210915191422.2371623-1-drhodes@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
<sugar.zhang@rock-chips.com>:
These patches fixup or update for rockchip pdm.
Changes in v4:
- Acked by Rob Herring
Changes in v3:
- Fix property 'path-map' suggested by Rob Herring.
Changes in v2:
- Fix yamllint errors.
Sugar Zhang (7):
ASoC: rockchip: Add support for rv1126 pdm
ASoC: dt-bindings: rockchip: Add binding for rv1126 pdm
ASoC: rockchip: pdm: Add support for rk3568 pdm
ASoC: dt-bindings: rockchip: Add binding for rk3568 pdm
ASoC: rockchip: pdm: Add support for path map
ASoC: dt-bindings: rockchip: pdm: Document property
'rockchip,path-map'
ASoC: dt-bindings: rockchip: Convert pdm bindings to yaml
.../devicetree/bindings/sound/rockchip,pdm.txt | 46 --------
.../devicetree/bindings/sound/rockchip,pdm.yaml | 120 +++++++++++++++++++++
sound/soc/rockchip/rockchip_pdm.c | 112 +++++++++++++++++--
sound/soc/rockchip/rockchip_pdm.h | 6 ++
4 files changed, 232 insertions(+), 52 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/sound/rockchip,pdm.txt
create mode 100644 Documentation/devicetree/bindings/sound/rockchip,pdm.yaml
--
2.7.4
|
|
<drhodes@opensource.cirrus.com>:
ASoC driver and devicetree documentation for a new
Cirrus Logic amplifier CS35L41
v7 changes:
Remove property 'classh-bst-max-limit'
David Rhodes (2):
ASoC: cs35l41: CS35L41 Boosted Smart Amplifier
ASoC: cs35l41: Add bindings for CS35L41
.../devicetree/bindings/sound/cs35l41.yaml | 151 ++
include/sound/cs35l41.h | 34 +
sound/soc/codecs/Kconfig | 12 +
sound/soc/codecs/Makefile | 4 +
sound/soc/codecs/cs35l41-i2c.c | 114 ++
sound/soc/codecs/cs35l41-spi.c | 143 ++
sound/soc/codecs/cs35l41-tables.c | 597 +++++++
sound/soc/codecs/cs35l41.c | 1545 +++++++++++++++++
sound/soc/codecs/cs35l41.h | 775 +++++++++
9 files changed, 3375 insertions(+)
create mode 100644 Documentation/devicetree/bindings/sound/cs35l41.yaml
create mode 100644 include/sound/cs35l41.h
create mode 100644 sound/soc/codecs/cs35l41-i2c.c
create mode 100644 sound/soc/codecs/cs35l41-spi.c
create mode 100644 sound/soc/codecs/cs35l41-tables.c
create mode 100644 sound/soc/codecs/cs35l41.c
create mode 100644 sound/soc/codecs/cs35l41.h
--
2.25.1
|
|
<maxime@cerno.tech>:
Hi,
Here's another round of schema warnings fixes for the Allwinner platform.
There's a fair share of new schemas in there since the schema tools now warn
when a compatible is not documented in a schema.
We don't have any warning anymore if we use the OPP binding Rob submitted, and
since that means we have all our devices properly validated I don't expect more
fixes now, aside from the usual bunch of regressions.
Let me know what you think,
Maxime
Maxime Ripard (52):
ASoC: dt-bindings: Add WM8978 Binding
ASoC: dt-bindings: Convert Bluetooth SCO Link binding to a schema
ASoC: dt-bindings: Convert SPDIF Transmitter binding to a schema
ASoC: dt-bindings: Convert Simple Amplifier binding to a schema
dt-bindings: Convert Reserved Memory binding to a schema
dt-bindings: arm: Convert ARM CCI-400 binding to a schema
dt-bindings: bluetooth: broadcom: Fix clocks check
dt-bindings: bluetooth: realtek: Add missing max-speed
dt-bindings: clocks: Fix typo in the H6 compatible
dt-bindings: display: Move idk-1110wr to panel-lvds
dt-bindings: display: Move idk-2121wr to panel-lvds
dt-bindings: display: Move ee101ia-01d to panel-lvds
dt-bindings: display: aa104xd12: Remove unused vcc-supply
dt-bindings: display: aa104xd12: Fix data-mapping
dt-bindings: display: Move aa104xd12 to panel-lvds
dt-bindings: display: aa121td01: Remove unused vcc-supply
dt-bindings: display: aa121td01: Fix data-mapping
dt-bindings: display: Move aa121td01 to panel-lvds
dt-bindings: display: Move gktw70sdae4se to panel-lvds
dt-bindings: display: panel-lvds: Document missing panel compatibles
dt-bindings: gnss: Convert UBlox Neo-6M binding to a schema
dt-bindings: gpio: Convert X-Powers AXP209 GPIO binding to a schema
dt-bindings: hwmon: Add IIO HWMON binding
dt-bindings: input: Convert Silead GSL1680 binding to a schema
dt-bindings: interconnect: sunxi: Add R40 MBUS compatible
dt-bindings: media: ti,cal: Fix example
dt-bindings: media: Convert OV5640 binding to a schema
dt-bindings: mfd: Convert X-Powers AC100 binding to a schema
dt-bindings: mfd: Convert X-Powers AXP binding to a schema
dt-bindings: mmc: Convert MMC Card binding to a schema
dt-bindings: net: dwmac: Fix typo in the R40 compatible
dt-bindings: net: wireless: Convert ESP ESP8089 binding to a schema
dt-bindings: regulator: Convert SY8106A binding to a schema
dt-bindings: sunxi: Add CPU Configuration Controller Binding
dt-bindings: sunxi: Add Allwinner A80 PRCM Binding
dt-bindings: usb: Convert SMSC USB3503 binding to a schema
dt-bindings: usb: dwc3: Fix usb-phy check
dt-bindings: w1: Convert 1-Wire GPIO binding to a schema
ARM: dts: sunxi: Rename power-supply names
ARM: dts: sunxi: Rename gpio pinctrl names
ARM: dts: sunxi: Fix OPP arrays
ARM: dts: sunxi: Fix OPPs node name
ARM: dts: sunxi: Fix the SPI NOR node names
ARM: dts: v3s: Remove useless DMA properties
ARM: dts: tbs711: Fix touchscreen compatible
ARM: dts: cubieboard4: Remove the dumb-vga-dac compatible
arm64: dts: allwinner: h5: Fix GPU thermal zone node name
arm64: dts: allwinner: h6: Fix de3 parent clocks ordering
arm64: dts: allwinner: a100: Fix thermal zone node name
arm64: dts: allwinner: pinetab: Change regulator node name to avoid
warning
arm64: dts: allwinner: teres-i: Add missing reg
arm64: dts: allwinner: teres-i: Remove wakekup-source from the PMIC
.../devicetree/bindings/arm/arm,cci-400.yaml | 216 ++++++++++
.../bindings/arm/cci-control-port.yaml | 38 ++
Documentation/devicetree/bindings/arm/cci.txt | 224 ----------
.../devicetree/bindings/arm/cpus.yaml | 2 +
.../arm/sunxi/allwinner,sun4i-a10-mbus.yaml | 1 +
.../sunxi/allwinner,sun6i-a31-cpuconfig.yaml | 38 ++
.../arm/sunxi/allwinner,sun9i-a80-prcm.yaml | 33 ++
.../clock/allwinner,sun8i-a83t-de2-clk.yaml | 2 +-
.../display/panel/advantech,idk-1110wr.yaml | 69 ---
.../display/panel/advantech,idk-2121wr.yaml | 121 ------
.../display/panel/innolux,ee101ia-01d.yaml | 31 --
.../bindings/display/panel/lvds.yaml | 130 +++++-
.../display/panel/mitsubishi,aa104xd12.yaml | 75 ----
.../display/panel/mitsubishi,aa121td01.yaml | 74 ----
.../display/panel/sgd,gktw70sdae4se.yaml | 68 ---
.../bindings/gnss/u-blox,neo-6m.yaml | 62 +++
.../devicetree/bindings/gnss/u-blox.txt | 45 --
.../devicetree/bindings/gpio/gpio-axp209.txt | 75 ----
.../bindings/gpio/x-powers,axp209-gpio.yaml | 55 +++
.../devicetree/bindings/hwmon/iio-hwmon.yaml | 37 ++
.../i2c/allwinner,sun6i-a31-p2wi.yaml | 2 +-
.../input/touchscreen/silead,gsl1680.yaml | 91 ++++
.../input/touchscreen/silead_gsl1680.txt | 44 --
.../devicetree/bindings/media/i2c/ov5640.txt | 92 ----
.../bindings/media/i2c/ovti,ov5640.yaml | 154 +++++++
.../devicetree/bindings/media/ti,cal.yaml | 4 +-
.../devicetree/bindings/mfd/ac100.txt | 50 ---
.../devicetree/bindings/mfd/axp20x.txt | 273 ------------
.../bindings/mfd/x-powers,ac100.yaml | 116 +++++
.../bindings/mfd/x-powers,axp152.yaml | 400 ++++++++++++++++++
.../devicetree/bindings/mmc/mmc-card.txt | 30 --
.../devicetree/bindings/mmc/mmc-card.yaml | 48 +++
.../bindings/mmc/mmc-controller.yaml | 6 -
.../net/allwinner,sun8i-a83t-emac.yaml | 4 +-
.../bindings/net/broadcom-bluetooth.yaml | 17 +-
.../bindings/net/realtek-bluetooth.yaml | 2 +
.../devicetree/bindings/net/snps,dwmac.yaml | 6 +-
.../bindings/net/wireless/esp,esp8089.txt | 30 --
.../bindings/net/wireless/esp,esp8089.yaml | 43 ++
.../bindings/regulator/silergy,sy8106a.yaml | 52 +++
.../bindings/regulator/sy8106a-regulator.txt | 23 -
.../reserved-memory/memory-region.yaml | 40 ++
.../reserved-memory/reserved-memory.txt | 172 +-------
.../reserved-memory/reserved-memory.yaml | 96 +++++
.../reserved-memory/shared-dma-pool.yaml | 87 ++++
.../devicetree/bindings/sound/bt-sco.txt | 13 -
.../bindings/sound/linux,bt-sco.yaml | 38 ++
.../bindings/sound/linux,spdif-dit.yaml | 32 ++
.../bindings/sound/simple-amplifier.txt | 17 -
.../sound/simple-audio-amplifier.yaml | 45 ++
.../bindings/sound/spdif-transmitter.txt | 10 -
.../devicetree/bindings/sound/wlf,wm8978.yaml | 58 +++
.../devicetree/bindings/usb/smsc,usb3503.yaml | 108 +++++
.../devicetree/bindings/usb/snps,dwc3.yaml | 10 +-
.../devicetree/bindings/usb/usb3503.txt | 39 --
.../devicetree/bindings/w1/w1-gpio.txt | 27 --
.../devicetree/bindings/w1/w1-gpio.yaml | 44 ++
arch/arm/boot/dts/axp209.dtsi | 6 +-
arch/arm/boot/dts/axp22x.dtsi | 6 +-
arch/arm/boot/dts/axp81x.dtsi | 10 +-
.../arm/boot/dts/sun4i-a10-olinuxino-lime.dts | 11 +-
arch/arm/boot/dts/sun4i-a10.dtsi | 11 +-
arch/arm/boot/dts/sun5i-a13.dtsi | 15 +-
arch/arm/boot/dts/sun6i-a31.dtsi | 44 +-
arch/arm/boot/dts/sun7i-a20-bananapi.dts | 17 +-
arch/arm/boot/dts/sun7i-a20.dtsi | 34 +-
arch/arm/boot/dts/sun8i-a33.dtsi | 4 +-
arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts | 2 +-
arch/arm/boot/dts/sun8i-a83t.dtsi | 4 +-
arch/arm/boot/dts/sun8i-h3.dtsi | 4 +-
arch/arm/boot/dts/sun8i-v3-sl631.dtsi | 2 +-
arch/arm/boot/dts/sun8i-v3s.dtsi | 2 -
arch/arm/boot/dts/sun9i-a80-cubieboard4.dts | 2 +-
.../boot/dts/sunxi-libretech-all-h3-it.dtsi | 2 +-
arch/arm64/boot/dts/allwinner/axp803.dtsi | 10 +-
.../arm64/boot/dts/allwinner/sun50i-a100.dtsi | 6 +-
.../dts/allwinner/sun50i-a64-cpu-opp.dtsi | 2 +-
.../dts/allwinner/sun50i-a64-orangepi-win.dts | 2 +-
.../boot/dts/allwinner/sun50i-a64-pinetab.dts | 2 +-
.../boot/dts/allwinner/sun50i-a64-teres-i.dts | 3 +-
.../boot/dts/allwinner/sun50i-h5-cpu-opp.dtsi | 2 +-
arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi | 2 +-
.../boot/dts/allwinner/sun50i-h6-cpu-opp.dtsi | 2 +-
arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi | 8 +-
84 files changed, 2191 insertions(+), 1743 deletions(-)
create mode 100644 Documentation/devicetree/bindings/arm/arm,cci-400.yaml
create mode 100644 Documentation/devicetree/bindings/arm/cci-control-port.yaml
delete mode 100644 Documentation/devicetree/bindings/arm/cci.txt
create mode 100644 Documentation/devicetree/bindings/arm/sunxi/allwinner,sun6i-a31-cpuconfig.yaml
create mode 100644 Documentation/devicetree/bindings/arm/sunxi/allwinner,sun9i-a80-prcm.yaml
delete mode 100644 Documentation/devicetree/bindings/display/panel/advantech,idk-1110wr.yaml
delete mode 100644 Documentation/devicetree/bindings/display/panel/advantech,idk-2121wr.yaml
delete mode 100644 Documentation/devicetree/bindings/display/panel/innolux,ee101ia-01d.yaml
delete mode 100644 Documentation/devicetree/bindings/display/panel/mitsubishi,aa104xd12.yaml
delete mode 100644 Documentation/devicetree/bindings/display/panel/mitsubishi,aa121td01.yaml
delete mode 100644 Documentation/devicetree/bindings/display/panel/sgd,gktw70sdae4se.yaml
create mode 100644 Documentation/devicetree/bindings/gnss/u-blox,neo-6m.yaml
delete mode 100644 Documentation/devicetree/bindings/gnss/u-blox.txt
delete mode 100644 Documentation/devicetree/bindings/gpio/gpio-axp209.txt
create mode 100644 Documentation/devicetree/bindings/gpio/x-powers,axp209-gpio.yaml
create mode 100644 Documentation/devicetree/bindings/hwmon/iio-hwmon.yaml
create mode 100644 Documentation/devicetree/bindings/input/touchscreen/silead,gsl1680.yaml
delete mode 100644 Documentation/devicetree/bindings/input/touchscreen/silead_gsl1680.txt
delete mode 100644 Documentation/devicetree/bindings/media/i2c/ov5640.txt
create mode 100644 Documentation/devicetree/bindings/media/i2c/ovti,ov5640.yaml
delete mode 100644 Documentation/devicetree/bindings/mfd/ac100.txt
delete mode 100644 Documentation/devicetree/bindings/mfd/axp20x.txt
create mode 100644 Documentation/devicetree/bindings/mfd/x-powers,ac100.yaml
create mode 100644 Documentation/devicetree/bindings/mfd/x-powers,axp152.yaml
delete mode 100644 Documentation/devicetree/bindings/mmc/mmc-card.txt
create mode 100644 Documentation/devicetree/bindings/mmc/mmc-card.yaml
delete mode 100644 Documentation/devicetree/bindings/net/wireless/esp,esp8089.txt
create mode 100644 Documentation/devicetree/bindings/net/wireless/esp,esp8089.yaml
create mode 100644 Documentation/devicetree/bindings/regulator/silergy,sy8106a.yaml
delete mode 100644 Documentation/devicetree/bindings/regulator/sy8106a-regulator.txt
create mode 100644 Documentation/devicetree/bindings/reserved-memory/memory-region.yaml
create mode 100644 Documentation/devicetree/bindings/reserved-memory/reserved-memory.yaml
create mode 100644 Documentation/devicetree/bindings/reserved-memory/shared-dma-pool.yaml
delete mode 100644 Documentation/devicetree/bindings/sound/bt-sco.txt
create mode 100644 Documentation/devicetree/bindings/sound/linux,bt-sco.yaml
create mode 100644 Documentation/devicetree/bindings/sound/linux,spdif-dit.yaml
delete mode 100644 Documentation/devicetree/bindings/sound/simple-amplifier.txt
create mode 100644 Documentation/devicetree/bindings/sound/simple-audio-amplifier.yaml
delete mode 100644 Documentation/devicetree/bindings/sound/spdif-transmitter.txt
create mode 100644 Documentation/devicetree/bindings/sound/wlf,wm8978.yaml
create mode 100644 Documentation/devicetree/bindings/usb/smsc,usb3503.yaml
delete mode 100644 Documentation/devicetree/bindings/usb/usb3503.txt
delete mode 100644 Documentation/devicetree/bindings/w1/w1-gpio.txt
create mode 100644 Documentation/devicetree/bindings/w1/w1-gpio.yaml
--
2.31.1
|
|
<spujar@nvidia.com>:
Following are the changes:
- Add json-schema for 'sound-name-prefix' documentation under
'name-perfix.yaml'
- Use schema references wherever needed.
- Remove txt based doc
Changelog
=========
v2 -> v3
--------
* Removed examples in patch 1/3 as suggested by Rob
* Added reviewed tag from Jerome for the series
* Added reviewed tag from Rob for patch 2/3
v1 -> v2
--------
* Provide top reference to name-prefix.yaml as suggested by Rob
for patch 2/3
* Dropped couple of unreachable email ids from Cc list in commit
message of patch 2/3
* No changes in remaining patches
Sameer Pujar (3):
ASoC: Add json-schema documentation for sound-name-prefix
ASoC: Use schema reference for sound-name-prefix
ASoC: Remove name-prefix.txt
.../devicetree/bindings/sound/name-prefix.txt | 24 ----------------------
.../devicetree/bindings/sound/name-prefix.yaml | 21 +++++++++++++++++++
.../bindings/sound/nvidia,tegra186-dspk.yaml | 9 +++-----
.../bindings/sound/nvidia,tegra210-dmic.yaml | 9 +++-----
.../bindings/sound/nvidia,tegra210-i2s.yaml | 9 +++-----
.../devicetree/bindings/sound/nxp,tfa989x.yaml | 9 +++-----
Documentation/devicetree/bindings/sound/rt5659.txt | 2 +-
.../bindings/sound/simple-audio-mux.yaml | 9 +++-----
8 files changed, 37 insertions(+), 55 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/sound/name-prefix.txt
create mode 100644 Documentation/devicetree/bindings/sound/name-prefix.yaml
--
2.7.4
|
|
Allwinner R40 has 3 I2S controllers, compatible to those, found in H3.
Add R40/H3 compatible pair to DT bindings.
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20210912072914.398419-2-jernej.skrabec@gmail.com
|
|
Realtek ALC5682I-VS codec is a ALC5682I-VD variant which supports I2C only.
Signed-off-by: Derek Fang <derek.fang@realtek.com>
Link: https://lore.kernel.org/r/20210831130258.19286-2-derek.fang@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Simple audio amplifiers are supported by Linux with a matching device
tree binding.
Now that we have the DT validation in place, let's convert the device
tree bindings for that driver over to a YAML schema.
Cc: alsa-devel@alsa-project.org
Cc: Jerome Brunet <jbrunet@baylibre.com>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20210901091852.479202-5-maxime@cerno.tech
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The SPDIF Transmitter binding is used by Linux with a matching Device
Tree binding.
Now that we have the DT validation in place, let's convert the device
tree bindings for that driver over to a YAML schema.
Cc: alsa-devel@alsa-project.org
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20210901091852.479202-4-maxime@cerno.tech
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Bluetooth SCO Link are supported by Linux with a matching device tree
binding.
Now that we have the DT validation in place, let's convert the device
tree bindings for that driver over to a YAML schema.
Cc: alsa-devel@alsa-project.org
Cc: devicetree@vger.kernel.org
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Samuel Holland <samuel@sholland.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20210901091852.479202-3-maxime@cerno.tech
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Even though we had the wm8978 driver for some time and a number of
boards using it already, we never had a binding for it. Let's add it
based on what the driver expects and the boards are providing.
Cc: alsa-devel@alsa-project.org
Cc: devicetree@vger.kernel.org
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: patches@opensource.cirrus.com
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210901091852.479202-2-maxime@cerno.tech
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Since schema name-prefix.yaml is available and references are updated,
remove txt based doc.
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Cc: Jerome Brunet <jbrunet@baylibre.com>
Cc: Rob Herring <robh+dt@kernel.org>
Reviewed-by: Jerome Brunet <jbrunet@baylibre.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/1630686919-19495-4-git-send-email-spujar@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Use schema reference for 'sound-name-prefix' property wherever
necessary.
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Cc: Jerome Brunet <jbrunet@baylibre.com>
Cc: Stephan Gerhold <stephan@gerhold.net>
Cc: Rob Herring <robh+dt@kernel.org>
Reviewed-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/1630686919-19495-3-git-send-email-spujar@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|