Age | Commit message (Collapse) | Author |
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer updates from Thomas Gleixner:
"Updates for time and clocksources:
- A fix for the idle and iowait time accounting vs CPU hotplug.
The time is reset on CPU hotplug which makes the accumulated
systemwide time jump backwards.
- Assorted fixes and improvements for clocksource/event drivers"
* tag 'timers-core-2024-01-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
tick-sched: Fix idle and iowait sleeptime accounting vs CPU hotplug
clocksource/drivers/ep93xx: Fix error handling during probe
clocksource/drivers/cadence-ttc: Fix some kernel-doc warnings
clocksource/drivers/timer-ti-dm: Fix make W=n kerneldoc warnings
clocksource/timer-riscv: Add riscv_clock_shutdown callback
dt-bindings: timer: Add StarFive JH8100 clint
dt-bindings: timer: thead,c900-aclint-mtimer: separate mtime and mtimecmp regs
|
|
Add compatible string for the StarFive JH8100 clint.
Signed-off-by: Sia Jee Heng <jeeheng.sia@starfivetech.com>
Reviewed-by: Ley Foon Tan <leyfoon.tan@starfivetech.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20231201121410.95298-4-jeeheng.sia@starfivetech.com
|
|
The timer registers of aclint don't follow the clint layout and can
be mapped on any different offset. As sg2042 uses separated timer
and mswi for its clint, it should follow the aclint spec and have
separated registers.
The previous patch introduced a new type of T-HEAD aclint timer which
has clint timer layout. Although it has the clint timer layout, it
should follow the aclint spec and uses the separated mtime and mtimecmp
regs. So a ABI change is needed to make the timer fit the aclint spec.
To make T-HEAD aclint timer more closer to the aclint spec, use
regs-names to represent the mtimecmp register, which can avoid hack
for unsupport mtime register of T-HEAD aclint timer.
Also, as T-HEAD aclint only supports mtimecmp, it is unnecessary to
implement the whole aclint spec. To make this binding T-HEAD specific,
only add reg-name for existed register. For details, see the discussion
in the last link.
Signed-off-by: Inochi Amaoto <inochiama@outlook.com>
Fixes: 4734449f7311 ("dt-bindings: timer: Add Sophgo sg2042 CLINT timer")
Link: https://lists.infradead.org/pipermail/opensbi/2023-October/005693.html
Link: https://github.com/riscv/riscv-aclint/blob/main/riscv-aclint.adoc
Link: https://lore.kernel.org/all/IA1PR20MB4953F9D77FFC76A9D236922DBBB6A@IA1PR20MB4953.namprd20.prod.outlook.com/
Acked-by: Guo Ren <guoren@kernel.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/IA1PR20MB49531ED1BCC00D6B265C2D10BB86A@IA1PR20MB4953.namprd20.prod.outlook.com
|
|
Inochi Amaoto <inochiama@outlook.com> says:
Huashan Pi board is an embedded development platform based on the
CV1812H chip. Add minimal device tree files for this board.
Currently, it can boot to a basic shell.
NOTE: this series is based on the Jisheng's Milk-V Duo patch.
Link: https://en.sophgo.com/product/introduce/huashan.html
Link: https://en.sophgo.com/product/introduce/cv181xH.html
Link: https://lore.kernel.org/linux-riscv/20231006121449.721-1-jszhang@kernel.org/
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
|
|
Add compatible string for the SOPHGO CV1812H clint.
Signed-off-by: Inochi Amaoto <inochiama@outlook.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Jisheng Zhang <jszhang@kernel.org>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
|
|
Pull SoC DT updates from Arnd Bergmann:
"There are a couple new SoCs that are supported for the first time:
- AMD Pensando Elba is a data processing unit based on Cortex-A72 CPU
cores
- Sophgo makes RISC-V based chips, and we now support the CV1800B
chip used in the milkv-duo board and the massive sg2042 chip in the
milkv-pioneer, a 64-core developer workstation.
- Qualcomm Snapdragon 720G (sm7125) is a close relative of Snapdragon
7c and gets added with some Xiaomi phones
- Renesas gains support for the R8A779F4 (R-Car S4-8) automotive SoC
and the RZ/G3S (R9A08G045) embedded SoC.
There are also a bunch of newly supported machines that use already
supported chips. On the 32-bit side, we have:
- USRobotics USR8200 is a NAS/Firewall/router based on the ancient
Intel IXP4xx platform
- A couple of machines based on the NXP i.MX5 and i.MX6 platforms
- One machine each for Allwinner V3s, Aspeed AST2600, Microchip
sama5d29 and ST STM32mp157
The other ones all use arm64 cores on chips from allwinner, amlogic,
freescale, mediatek, qualcomm and rockchip"
* tag 'soc-dt-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (641 commits)
ARM: dts: BCM5301X: Set switch ports for Linksys EA9200
ARM: dts: BCM5301X: Set fixed-link for extra Netgear R8000 CPU ports
ARM: dts: BCM5301X: Explicitly disable unused switch CPU ports
ARM: dts: BCM5301X: Relicense Vivek's code to the GPL 2.0+ / MIT
ARM: dts: BCM5301X: Relicense Felix's code to the GPL 2.0+ / MIT
ARM: dts: BCM5301X: Set MAC address for Asus RT-AC87U
arm64: dts: socionext: add missing cache properties
riscv: dts: thead: convert isa detection to new properties
arm64: dts: Update cache properties for socionext
arm64: dts: ti: k3-am654-idk: Add ICSSG Ethernet ports
arm64: dts: ti: k3-am654-icssg2: add ICSSG2 Ethernet support
arm64: dts: ti: k3-am65-main: Add ICSSG IEP nodes
arm64: dts: ti: k3-am62p5-sk: Updates for SK EVM
arm64: dts: ti: k3-am62p: Add nodes for more IPs
arm64: dts: rockchip: Add Turing RK1 SoM support
dt-bindings: arm: rockchip: Add Turing RK1
dt-bindings: vendor-prefixes: add turing
arm64: dts: rockchip: Add DFI to rk3588s
arm64: dts: rockchip: Add DFI to rk356x
arm64: dts: rockchip: Always enable DFI on rk3399
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
- Add a kselftest to check for unprobed DT devices
- Fix address translation for some 3 address cells cases
- Refactor firmware node refcounting for AMBA bus
- Add bindings for qcom,sm4450-pdc, Qualcomm Kryo 465 CPU, and
Freescale QMC HDLC
- Add Marantec vendor prefix
- Convert qcom,pm8921-keypad, cnxt,cx92755-wdt, da9062-wdt, and
atmel,at91rm9200-wdt bindings to DT schema
- Several additionalProperties/unevaluatedProperties on child node
schemas fixes
- Drop reserved-memory bindings which now live in dtschema project
- Fix a reference to rockchip,inno-usb2phy.yaml
- Remove backlight nodes from display panel examples
- Expand example for using DT_SCHEMA_FILES
- Merge simple LVDS panel bindings to one binding doc
* tag 'devicetree-for-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (34 commits)
dt-bindings: soc: fsl: cpm_qe: cpm1-scc-qmc: Add support for QMC HDLC
dt-bindings: soc: fsl: cpm_qe: cpm1-scc-qmc: Add 'additionalProperties: false' in child nodes
dt-bindings: soc: fsl: cpm_qe: cpm1-scc-qmc: Fix example property name
dt-bindings: arm,coresight-cti: Add missing additionalProperties on child nodes
dt-bindings: arm,coresight-cti: Drop type for 'cpu' property
dt-bindings: soundwire: Add reference to soundwire-controller.yaml schema
dt-bindings: input: syna,rmi4: Make "additionalProperties: true" explicit
media: dt-bindings: ti,ds90ub960: Add missing type for "i2c-alias"
dt-bindings: input: qcom,pm8921-keypad: convert to YAML format
of: overlay: unittest: overlay_bad_unresolved: Spelling s/ok/okay/
of: address: Consolidate bus .map() functions
of: address: Store number of bus flag cells rather than bool
of: unittest: Add tests for address translations
of: address: Remove duplicated functions
of: address: Fix address translation when address-size is greater than 2
dt-bindings: watchdog: cnxt,cx92755-wdt: convert txt to yaml
dt-bindings: watchdog: da9062-wdt: convert txt to yaml
dt-bindings: watchdog: fsl,scu-wdt: Document imx8dl
dt-bindings: watchdog: atmel,at91rm9200-wdt: convert txt to yaml
dt-bindings: usb: rockchip,dwc3: update inno usb2 phy binding name
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control updates from Rafael Wysocki:
"These further rework the ACPI thermal driver, after the changes made
to it in the previous cycle, to make it easier to grasp, get rid of
redundant pieces of internal data structures and eliminate its
reliance on a specific ordering of trip point objects in the thermal
core, make thermal core adjustments needed for the ACPI thermal driver
rework, modify the thermal governor interface so as to use trip
pointers for representing trip points in it, switch over multiple
thermal drivers to using void platform driver remove callbacks, add
support for 2 hardware features to the Intel int340x thermal driver,
add support for new hardware on ARM platforms, update documentation,
fix problems, clean up code and update the MAINTAINERS record for
thermal control.
Specifics:
- Untangle the initialization and updates of passive and active trip
points in the ACPI thermal driver (Rafael Wysocki)
- Reduce code duplication related to the initialization and updates
of trip points in the ACPI thermal driver (Rafael Wysocki)
- Use trip pointers for cooling device binding in the ACPI thermal
driver (Rafael Wysocki)
- Simplify critical and hot trips representation in the ACPI thermal
driver (Rafael Wysocki)
- Use trip pointers in thermal governors and in the related part of
the thermal core (Rafael Wysocki)
- Drop the trips_disabled bitmask that has become redundant from the
thermal core (Rafael Wysocki)
- Avoid updating trip points when the thermal zone temperature falls
into a trip point's hysteresis range (ícolas F. R. A. Prado)
- Add power floor notifications support to the int340x thermal
control driver (Srinivas Pandruvada)
- Rework updating trip points in the int340x thermal driver so that
it does not access thermal zone internals directly (Rafael
Wysocki)
- Use param_get_byte() instead of param_get_int() as the max_idle
module parameter .get() callback in the Intel powerclamp thermal
driver to avoid possible out-of-bounds access (David Arcari)
- Add workload hints support to the int340x thermal driver (Srinivas
Pandruvada)
- Add support for Mediatek LVTS MT8192 along with suspend/resume
routines (Balsam Chihi)
- Fix probe for THERMAL_V2 in the Mediatek LVTS driver (Markus
Schneider-Pargmann)
- Remove duplicate error message from the max76620 driver when
thermal_of_zone_register() fails (Thierry Reding)
- Add i.MX7D compatible bindings to fix a warning from dtbs_check for
the imx6ul platform (Alexander Stein)
- Add sa8775p compatible to the QCom tsens driver (Priyansh Jain)
- Fix error check in lvts_debugfs_init() to be against PTR_ERR() in
the LVTS Mediatek driver (Minjie Du)
- Remove unused variable in thermal/tools (Kuan-Wei Chiu)
- Document the imx8dl thermal sensor (Fabio Estevam)
- Add variable names in callback prototypes to prevent warning from
checkpatch.pl in the imx8mm driver (Bragatheswaran Manickavel)
- Add missing unevaluatedProperties on child node schemas for
tegra124 (Rob Herring)
- Add mt7988 support to the Mediatek LVTS driver (Frank Wunderlich)"
* tag 'thermal-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (111 commits)
thermal: ACPI: Include the right header file
thermal: core: Don't update trip points inside the hysteresis range
thermal: core: Pass trip pointer to governor throttle callback
thermal: gov_step_wise: Fold update_passive_instance() into its caller
thermal: gov_power_allocator: Use trip pointers instead of trip indices
thermal: gov_fair_share: Rearrange get_trip_level()
thermal: trip: Define for_each_trip() macro
thermal: trip: Simplify computing trip indices
thermal/qcom/tsens: Drop ops_v0_1
thermal/drivers/mediatek/lvts_thermal: Update calibration data documentation
thermal/drivers/mediatek/lvts_thermal: Add mt8192 support
thermal/drivers/mediatek/lvts_thermal: Add suspend and resume
dt-bindings: thermal: mediatek: Add LVTS thermal controller definition for mt8192
thermal/drivers/mediatek: Fix probe for THERMAL_V2
thermal/drivers/max77620: Remove duplicate error message
dt-bindings: timer: add imx7d compatible
dt-bindings: net: microchip: Allow nvmem-cell usage
dt-bindings: imx-thermal: Add #thermal-sensor-cells property
dt-bindings: thermal: tsens: Add sa8775p compatible
thermal/drivers/mediatek/lvts_thermal: Fix error check in lvts_debugfs_init()
...
|
|
Since commit bad3db104f89 ("ARM: imx: source gpt per clk from OSC for
system timer") osc_per can be used for clocking the GPT which is not
scaled when entering low bus mode.
This clock source is available only on i.MX6Q (incl. i.MX6QP) and i.MX6DL.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230810144451.1459985-7-alexander.stein@ew.tq-group.com
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Currently the dtbs_check for imx6ul generates warnings like this:
['fsl,imx7d-gpt', 'fsl,imx6sx-gpt'] is too long
The driver has no special handling for fsl,imx7d-gpt, so fsl,imx6sx-gpt is
used. Therefore make imx7d GPT compatible to the imx6sx one to fix the
warning.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20231012080033.2715241-4-alexander.stein@ew.tq-group.com
|
|
Add device tree bindings for the Cirrus Logic EP93xx timer block
used in these SoCs.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20230915-ep93xx-v4-11-a1d779dcec10@maquefel.me
|
|
Add MTU3a binding documentation for Renesas RZ/{G2UL,Five} SoCs.
MTU3a block is identical to one found on RZ/G2L, so no driver changes are
required. The fallback compatible string "renesas,rz-mtu3" will be used
on RZ/{G2UL,Five}.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20230727081848.100834-4-biju.das.jz@bp.renesas.com
|
|
Fix the documentation issues pointed by Pavel while backporting
it to 6.1.y-cip.
- Replace '32- bit'->'32-bit'
- Consistently remove '.' at the end of line for the specifications
- Replace ' (excluding MTU8)'-> '(excluding MTU8)'
Reported-by: Pavel Machek <pavel@denx.de>
Closes: https://lore.kernel.org/all/ZH79%2FUjgYg+0Ruiu@duo.ucw.cz
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20230727081848.100834-3-biju.das.jz@bp.renesas.com
|
|
As per R01UH0914EJ0130 Rev.1.30 HW manual the MTU3 overflow/underflow
interrupt names starts with 'tci' instead of 'tgi'.
Fix this documentation issue by replacing below overflow/underflow
interrupt names:
- tgiv0->tciv0
- tgiv1->tciv1
- tgiu1->tciu1
- tgiv2->tciv2
- tgiu2->tciu2
- tgiv3->tciv3
- tgiv4->tciv4
- tgiv6->tciv6
- tgiv7->tciv7
- tgiv8->tciv8
- tgiu8->tciu8
Fixes: 0a9d6b54297e ("dt-bindings: timer: Document RZ/G2L MTU3a bindings")
Cc: stable@kernel.org
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20230727081848.100834-2-biju.das.jz@bp.renesas.com
|
|
Add compatible string for the SOPHGO CV1800B clint.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
|
|
The clint of Sophgo's sg2042 is based off IP designed by T-HEAD, but
Sophgo changes this IP layout to fit its cpu design and is incompatible
with the standard sifive clint. The timer and ipi device are on the
different address, and can not be handled by the sifive,clint dt-bindings.
If we use the same compatible string for mswi and timer of the sg2042
clint like sifive,clint, the DT may be like this:
mswi: interrupt-controller@94000000 {
compatible = "sophgo,sg2042-clint", "thead,c900-clint";
interrupts-extended = <&cpu1intc 3>;
reg = <0x94000000 0x00010000>;
};
timer: timer@ac000000 {
compatible = "sophgo,sg2042-clint", "thead,c900-clint";
interrupts-extended = <&cpu1intc 7>;
reg = <0xac000000 0x00010000>;
};
Since the address of mswi and timer are different, it is hard to merge
them directly. So we need two DT nodes to handle both devices.
If we use this DT for SBI, it will parse the mswi device in the timer
initialization as the compatible string is the same, so will mswi.
As they are different devices, this incorrect initialization will cause
the system unusable.
There is a more robust ACLINT spec. can handle this situation, but
the spec. seems to be abandoned and will not be frozen in the predictable
future.
So it is not the time to add ACLINT spec in the kernel bindings. Instead,
using vendor bindings is more acceptable.
Add new vendor specific compatible strings to identify timer of sg2042
clint.
Signed-off-by: Inochi Amaoto <inochiama@outlook.com>
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull clocksource/clockevent driver updates from Thomas Gleixner:
- Remove the OXNAS driver instead of adding a new one!
- A set of boring fixes, cleanups and improvements
* tag 'timers-core-2023-09-04-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
clocksource: Explicitly include correct DT includes
clocksource/drivers/sun5i: Convert to platform device driver
clocksource/drivers/sun5i: Remove pointless struct
clocksource/drivers/sun5i: Remove duplication of code and data
clocksource/drivers/loongson1: Set variable ls1x_timer_lock storage-class-specifier to static
clocksource/drivers/arm_arch_timer: Disable timer before programming CVAL
dt-bindings: timer: oxsemi,rps-timer: remove obsolete bindings
clocksource/drivers/timer-oxnas-rps: Remove obsolete timer driver
|
|
Pull documentation updates from Jonathan Corbet:
"Documentation work keeps chugging along; this includes:
- Work from Carlos Bilbao to integrate rustdoc output into the
generated HTML documentation. This took some work to figure out how
to do it without slowing the docs build and without creating people
who don't have Rust installed, but Carlos got there
- Move the loongarch and mips architecture documentation under
Documentation/arch/
- Some more maintainer documentation from Jakub
... plus the usual assortment of updates, translations, and fixes"
* tag 'docs-6.6' of git://git.lwn.net/linux: (56 commits)
Docu: genericirq.rst: fix irq-example
input: docs: pxrc: remove reference to phoenix-sim
Documentation: serial-console: Fix literal block marker
docs/mm: remove references to hmm_mirror ops and clean typos
docs/zh_CN: correct regi_chg(),regi_add() to region_chg(),region_add()
Documentation: Fix typos
Documentation/ABI: Fix typos
scripts: kernel-doc: fix macro handling in enums
scripts: kernel-doc: parse DEFINE_DMA_UNMAP_[ADDR|LEN]
Documentation: riscv: Update boot image header since EFI stub is supported
Documentation: riscv: Add early boot document
Documentation: arm: Add bootargs to the table of added DT parameters
docs: kernel-parameters: Refer to the correct bitmap function
doc: update params of memhp_default_state=
docs: Add book to process/kernel-docs.rst
docs: sparse: fix invalid link addresses
docs: vfs: clean up after the iterate() removal
docs: Add a section on surveys to the researcher guidelines
docs: move mips under arch
docs: move loongarch under arch
...
|
|
and fix all in-tree references.
Architecture-specific documentation is being moved into Documentation/arch/
as a way of cleaning up the top-level documentation directory and making
the docs hierarchy more closely match the source hierarchy.
Signed-off-by: Costa Shulyupin <costa.shul@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20230725043835.2249678-1-costa.shul@redhat.com
|
|
Fix typos in Documentation/devicetree/bindings. The changes are in
descriptions or comments where they shouldn't affect functionality.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/r/20230814212822.193684-3-helgaas@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Due to lack of maintenance and stall of development for a few years now,
and since no new features will ever be added upstream, remove the
OX810 and OX820 timer bindings.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20230630-topic-oxnas-upstream-remove-v2-4-fb6ab3dea87c@linaro.org
|
|
Pull ARM SoC devicetree updates from Arnd Bergmann:
"The biggest change this time is for the 32-bit devicetree files, which
are all moved to a new location, using separate subdirectories for
each SoC vendor, following the same scheme that is used on arm64, mips
and riscv. This has been discussed for many years, but so far we never
did this as there was a plan to move the files out of the kernel
entirely, which has never happened.
The impact of this will be that all external patches no longer apply,
and anything depending on the location of the dtb files in the build
directory will have to change. The installed files after 'make
dtbs_install' keep the current location.
There are six added SoCs here that are largely variants of previously
added chips. Two other chips are added in a separate branch along with
their device drivers.
- The Samsung Exynos 4212 makes its return after the Samsung Galaxy
Express phone is addded at last. The SoC support was originally
added in 2012 but removed again in 2017 as it was unused at the
time.
- Amlogic C3 is a Cortex-A35 based smart IP camera chip
- Qualcomm MSM8939 (Snapdragon 615) is a more featureful variant of
the still common MSM8916 (Snapdragon 410) phone chip that has been
supported for a long time.
- Qualcomm SC8180x (Snapdragon 8cx) is one of their earlier high-end
laptop chips, used in the Lenovo Flex 5G, which is added along with
the reference board.
- Qualcomm SDX75 is the latest generation modem chip that is used as
a peripherial in phones but can also run a standalone Linux. Unlike
the prior 32-bit SDX65 and SDX55, this now has a 64-bit Cortex-A55.
- Alibaba T-Head TH1520 is a quad-core RISC-V chip based on the
Xuantie C910 core, a step up from all previously added rv64 chips.
All of the above come with reference board implementations, those
included there are 39 new board files, but only five more 32-bit this
time, probably a new low:
- Marantec Maveo board based on dhcor imx6ull module
- Endian 4i Edge 200, based on the armv5 Marvell Kirkwood chip
- Epson Moverio BT-200 AR glasses based on TI OMAP4
- PHYTEC STM32MP1-3 Dev board based on STM32MP15 PHYTEC SOM
- ICnova ADB4006 board based on Allwinner A20
On the 64-bit side, there are also fewer addded machines than we had
in the recent releases:
- Three boards based on NXP i.MX8: Emtop SoM & Baseboard, NXP i.MX8MM
EVKB board and i.MX8MP based Gateworks Venice gw7905-2x device.
- NVIDIA IGX Orin and Jetson Orin Nano boards, both based on tegra234
- Qualcomm gains support for 6 reference boards on various members of
their IPQ networking SoC series, as well as the Sony Xperia M4 Aqua
phone, the Acer Aspire 1 laptop, and the Fxtec Pro1X board on top
of the various reference platforms for their new chips.
- Rockchips support for several newer boards: Indiedroid Nova
(rk3588), Edgeble Neural Compute Module 6B (rk3588), FriendlyARM
NanoPi R2C Plus (rk3328), Anbernic RG353PS (rk3566), Lunzn
Fastrhino R66S/R68S (rk3568)
- TI K3/AM625 based PHYTEC phyBOARD-Lyra-AM625 board and Toradex
Verdin family with AM62 COM, carrier and dev boards
Other changes to existing boards contain the usual minor improvements
along with
- continued updates to clean up dts files based on dtc warnings and
binding checks, in particular cache properties and node names
- support for devicetree overlays on at91, bcm283x
- significant additions to existing SoC support on mediatek,
qualcomm, ti k3 family, starfive jh71xx, NXP i.MX6 and i.MX8, ST
STM32MP1
As usual, a lot more detail is available in the individual merge
commits"
* tag 'soc-dt-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (926 commits)
ARM: mvebu: fix unit address on armada-390-db flash
ARM: dts: Move .dts files to vendor sub-directories
kbuild: Support flat DTBs install
ARM: dts: Add .dts files missing from the build
ARM: dts: allwinner: Use quoted #include
ARM: dts: lan966x: kontron-d10: add PHY interrupts
ARM: dts: lan966x: kontron-d10: fix SPI CS
ARM: dts: lan966x: kontron-d10: fix board reset
ARM: dts: at91: Enable device-tree overlay support for AT91 boards
arm: dts: Enable device-tree overlay support for AT91 boards
arm64: dts: exynos: Remove clock from Exynos850 pmu_system_controller
ARM: dts: at91: use generic name for shutdown controller
ARM: dts: BCM5301X: Add cells sizes to PCIe nodes
dt-bindings: firmware: brcm,kona-smc: convert to YAML
riscv: dts: sort makefile entries by directory
riscv: defconfig: enable T-HEAD SoC
MAINTAINERS: add entry for T-HEAD RISC-V SoC
riscv: dts: thead: add sipeed Lichee Pi 4A board device tree
riscv: dts: add initial T-HEAD TH1520 SoC device tree
riscv: Add the T-HEAD SoC family Kconfig option
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"Bindings:
- Add some missing type definitions to properties
- Drop unneeded quotes and use absolute paths in bindings
- Remove redundant "binding" or "schema" in binding titles
- Add bindings for Ralink SoCs interrupt controller, QCA2066
Bluetooth, infineon,irps5401, new NXP i.MX GPT variants, shineworld
lh133k MIPI SPI panel, Socionext Synquacer platforms, RK3588 PCIe,
ST M95640 EEPROM, and FSL DCP crypto variants, and Arm Cortex-R52
DT core:
- Improve the reserved-memory range allocation to maximize contiguous
space
- Use device_set_node() helper in place of open coding"
* tag 'devicetree-for-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (40 commits)
dt-bindings: interrupt-controller: add Ralink SoCs interrupt controller
dt-bindings: PCI: dwc: rockchip: Update for RK3588
dt-bindings: auxdisplay: holtek: Add missing type for "linux,no-autorepeat"
dt-bindings: input: mediatek,pmic-keys: Fix typo in "linux,keycodes" property name
dt-bindings: pwm: drop unneeded quotes
dt-bindings: crypto: drop unneeded quotes
dt-bindings: arm: socionext: add Synquacer platforms
dt-bindings: connector: usb: allow a single HS port
dt-bindings: bus: ti-sysc: fix typo
of: reserved_mem: Use stable allocation order
of: reserved_mem: Try to keep range allocations contiguous
dt-bindings: arm: drop unneeded quotes and use absolute /schemas path
dt-bindings: firmware: arm,scmi: drop unneeded quotes and use absolute /schemas path
dt-bindings: dvfs: drop unneeded quotes
dt-bindings: gpu: drop unneeded quotes
dt-bindings: i3c: silvaco,i3c-master: drop unneeded quotes
dt-bindings: rockchip: grf: drop unneeded quotes
dt-bindings: spmi: mtk,spmi-mtk-pmif: drop unneeded quotes
dt-bindings: Remove last usage of "binding" or "schema" in titles
dt-bindings: display: panel: mipi-dbi-spi: add spi-3wire property
...
|
|
Add YAML documentation for the timer which is present on Ralink SoCs.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20230620100231.1412582-1-sergio.paracuellos@gmail.com
|
|
Convert Broadcom Kona family timer bindings to DT schema.
Changes during conversion:
- drop deprecated compatible (it's been deprecated for ~10 years)
Signed-off-by: Stanislav Jakubek <stano.jakubek@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20230618144635.GA22166@standask-GA-A55M-S2HP
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into soc/dt
RISC-V Devicetrees for v6.5 Part 2
T-Head:
Add a basic dtsi, Kconfig bits & trivial binding additions for the T-Head
1520 SoC (codename "light"). This SoC can be found on the Lichee Pi 4a,
for which a minimal dts is added.
Misc:
Re-sort the dts Makefile to be in alphanumerical order by directory.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
* tag 'riscv-dt-for-v6.5-pt2' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux:
riscv: dts: sort makefile entries by directory
riscv: defconfig: enable T-HEAD SoC
MAINTAINERS: add entry for T-HEAD RISC-V SoC
riscv: dts: thead: add sipeed Lichee Pi 4A board device tree
riscv: dts: add initial T-HEAD TH1520 SoC device tree
riscv: Add the T-HEAD SoC family Kconfig option
dt-bindings: riscv: Add T-HEAD TH1520 board compatibles
dt-bindings: timer: Add T-HEAD TH1520 clint
dt-bindings: interrupt-controller: Add T-HEAD's TH1520 PLIC
Link: https://lore.kernel.org/r/20230620-fidelity-variety-60b47c889e31@spud
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
soc/dt
arm64: ZynqMP DT changes for v6.5
Various small fixes and cleanups to be aligned with the latest dt-schema.
Other major changes are:
- Wire mali-400 gpu
- Change board name for zcu1275
- Use ethernet-phy-id to handle ETH phy reset properly
- Switch to amd.com emails
- Update people in DT bindings
* tag 'zynqmp-dt-for-v6.5' of https://github.com/Xilinx/linux-xlnx: (33 commits)
dt-bindings: usb: xilinx: Replace Manish by Piyush
dt-bindings: xilinx: Remove Rajan, Jolly and Manish
arm64: zynqmp: Used fixed-partitions for QSPI in k26
arm64: zynqmp: Add pmu interrupt-affinity
arm64: zynqmp: Set qspi tx-buswidth to 4
arm64: zynqmp: Fix usb node drive strength and slew rate
arm64: zynqmp: Describe TI phy as ethernet-phy-id
arm64: zynqmp: Switch to amd.com emails
arm64: zynqmp: Convert kv260-revA overlay to ASCII text
dt-bindings: xilinx: Switch xilinx.com emails to amd.com
arm64: xilinx: Use zynqmp prefix for SOM dt overlays
arm64: zynqmp: Add phase tags marking
arm64: zynqmp: Describe bus-width for SD card on KV260
arm64: zynqmp: Enable AMS on SOM and other zcu10x boards
arm64: zynqmp: Enable DP driver for SOMs
arm64: zynqmp: Setup clock for DP and DPDMA
arm64: zynqmp: Switch to ethernet-phy-id in kv260
arm64: zynqmp: Disable USB3.0 for zc1751-xm016-dc2
arm64: zynqmp: Add pinctrl emmc description to SM-K26
arm64: zynqmp: Add gpio labels for modepin gpio
...
Link: https://lore.kernel.org/r/CAHTX3d+2s_KmCnd=x5hydGb+LYoznAzYGTizvqqN2NFmrBurfw@mail.gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Add devicetree binding document for Loongson-1 clocksource.
Signed-off-by: Keguang Zhang <keguang.zhang@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20230512103724.587760-3-keguang.zhang@gmail.com
|
|
Jisheng Zhang <jszhang@kernel.org> says:
Sipeed's Lichee Pi 4A development board uses Lichee Module 4A core
module which is powered by T-HEAD's TH1520 SoC. Add minimal device
tree files for the core module and the development board.
Support basic uart/gpio/dmac drivers, so supports booting to a basic
shell.
This also pulls in -rc2, because of some maintainers re-jigging that
went on in the interim in commit 80e62bc8487b ("MAINTAINERS: re-sort
all entries and fields").
Link: https://lore.kernel.org/r/20230617161529.2092-1-jszhang@kernel.org
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
|
|
Add compatible string for the T-HEAD TH1520 clint.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
|
|
The i.MX8MP has the same register layout as the i.MX6DL, so add it as a
variant allowing to add the GPT IP blocks to the i.MX8MP's dtsi file.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230327173526.851734-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Currently the dtbs_check for imx6ul generates warnings like this:
['fsl,imx6ul-gpt', 'fsl,imx6sx-gpt'] is too long
According to the timer-imx-gpt driver all imx6 use the same imx6dl data,
but according to the existing DTS files the imx6ul GPT IP is derived from
imx6sx. So better follow the DTS files here and make the imx6ul GPT
compatible to the imx6sl one to fix the warning.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230530100843.15072-3-stefan.wahren@i2se.com
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
@xilinx.com is still working but better to switch to new amd.com after
AMD/Xilinx acquisition.
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Acked-by: Wolfram Sang <wsa@kernel.org> # for I2C
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Jassi Brar <jassisinghbrar@gmail.com>
Acked-by: Damien Le Moal <dlemoal@kernel.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/f5b2bd1e78407e4128fc8f0b5874ba723e710a88.1684245058.git.michal.simek@amd.com
|
|
Replace the sentences in the description listing some supported variants
by comments on the individual compatible values, to ease future
maintenance. While at it, restore alphabetical sort order.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"New Drivers:
- Add support for Renesas RZ/G2L MTU3
New Device Support:
- Add support for Lenovo Yoga Book X90F to Intel CHT WC
- Add support for MAX5970 and MAX5978 to Simple MFD (I2C)
- Add support for Meteor Lake PCH-S LPSS PCI to Intel LPSS PCI
- Add support for AXP15060 PMIC to X-Powers PMIC collection
Remove Device Support:
- Remove support for Samsung 5M8751 and S5M8763 PMIC devices
New Functionality:
- Convert deprecated QCOM IRQ Chip to config registers
- Add support for 32-bit address spaces to Renesas SMUs
Fix-ups:
- Make use of APIs / MACROs designed to simplify and demystify
- Add / improve Device Tree bindings
- Memory saving struct layout optimisations
- Remove old / deprecated functionality
- Factor out unassigned register addresses from ranges
- Trivial: Spelling fixes, renames and coding style fixes
- Rid 'defined but not used' warnings
- Remove ineffective casts and pointer stubs
Bug Fixes:
- Fix incorrectly non-inverted mask/unmask IRQs on QCOM platforms
- Remove MODULE_*() helpers from non-tristate drivers
- Do not attempt to use out-of-range memory addresses associated with io_base
- Provide missing export helpers
- Fix remap bulk read optimisation fallout
- Fix memory leak issues in error paths"
* tag 'mfd-next-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (88 commits)
dt-bindings: mfd: ti,j721e-system-controller: Add SoC chip ID
leds: bd2606mvv: Driver for the Rohm 6 Channel i2c LED driver
dt-bindings: mfd: qcom,spmi-pmic: Document flash LED controller
dt-bindings: mfd: x-powers,axp152: Document the AXP15060 variant
mfd: axp20x: Add support for AXP15060 PMIC
dt-bindings: mfd: x-powers,axp152: Document the AXP313a variant
counter: rz-mtu3-cnt: Unlock on error in rz_mtu3_count_ceiling_write()
dt-bindings: mfd: dlg,da9063: Document voltage monitoring
dt-bindings: mfd: stm32: Remove unnecessary blank lines
dt-bindings: mfd: qcom,spmi-pmic: Use generic ADC node name in examples
dt-bindings: mfd: syscon: Add nuvoton,ma35d1-sys compatible
MAINTAINERS: Add entries for Renesas RZ/G2L MTU3a counter driver
counter: Add Renesas RZ/G2L MTU3a counter driver
Documentation: ABI: sysfs-bus-counter: add cascade_counts_enable and external_input_phase_clock_select
mfd: Add Renesas RZ/G2L MTU3a core driver
dt-bindings: timer: Document RZ/G2L MTU3a bindings
mfd: rsmu_i2c: Convert to i2c's .probe_new() again
mfd: intel-lpss: Add Intel Meteor Lake PCH-S LPSS PCI IDs
mfd: dln2: Fix memory leak in dln2_probe()
mfd: axp20x: Fix axp288 writable-ranges
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull more timer updates from Thomas Gleixner:
"Timekeeping and clocksource/event driver updates the second batch:
- A trivial documentation fix in the timekeeping core
- A really boring set of small fixes, enhancements and cleanups in
the drivers code. No new clocksource/clockevent drivers for a
change"
* tag 'timers-core-2023-04-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
timekeeping: Fix references to nonexistent ktime_get_fast_ns()
dt-bindings: timer: rockchip: Add rk3588 compatible
dt-bindings: timer: rockchip: Drop superfluous rk3288 compatible
clocksource/drivers/ti: Use of_property_read_bool() for boolean properties
clocksource/drivers/timer-ti-dm: Fix finding alwon timer
clocksource/drivers/davinci: Fix memory leak in davinci_timer_register when init fails
clocksource/drivers/stm32-lp: Drop of_match_ptr for ID table
clocksource/drivers/timer-ti-dm: Convert to platform remove callback returning void
clocksource/drivers/timer-tegra186: Convert to platform remove callback returning void
clocksource/drivers/timer-ti-dm: Improve error message in .remove
clocksource/drivers/timer-stm32-lp: Mark driver as non-removable
clocksource/drivers/sh_mtu2: Mark driver as non-removable
clocksource/drivers/timer-ti-dm: Use of_address_to_resource()
clocksource/drivers/timer-imx-gpt: Remove non-DT function
clocksource/drivers/timer-mediatek: Split out CPUXGPT timers
clocksource/drivers/exynos_mct: Explicitly return 0 for shared timer
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"Bindings:
- Convert Qcom IOMMU, Amlogic timer, Freescale sec-v4.0, Toshiba
TC358764 display bridge, Parade PS8622 display bridge, and Xilinx
FPGA bindings to DT schema format
- Add qdu1000 and sa8775p SoC support to Qcom PDC interrupt
controller
- Add MediaTek MT8365 UART and SYSIRQ bindings
- Add Arm Cortex-A78C and X1C core compatibles
- Add vendor prefix for Novatek
- Remove bindings for stih415, sti416, stid127 platforms
- Drop uneeded quotes in schema files. This is preparation for
yamllint checking quoting for us.
- Add missing (unevaluated|additional)Properties constraints on child
node schemas
- Clean-up schema comments formatting
- Fix I2C and SPI node bus names in schema examples
- Clean-up some display compatibles schema syntax
- Fix incorrect references to lvds.yaml
- Gather all cache controller bindings in a common directory
DT core:
- Convert unittest to new void .remove platform device hook
- kerneldoc fixes for DT address of_pci_range_to_resource/
of_address_to_resource functions"
* tag 'devicetree-for-6.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (46 commits)
dt-bindings: rng: Drop unneeded quotes
dt-bindings: arm/soc: mediatek: Drop unneeded quotes
dt-bindings: soc: qcom: Drop unneeded quotes
dt-bindings: i2c: samsung: Fix 'deprecated' value
dt-bindings: display: Fix lvds.yaml references
dt-bindings: display: simplify compatibles syntax
dt-bindings: display: mediatek: simplify compatibles syntax
dt-bindings: drm/bridge: ti-sn65dsi86: Fix the video-interfaces.yaml references
dt-bindings: timer: Drop unneeded quotes
dt-bindings: interrupt-controller: qcom,pdc: document qcom,qdu1000-pdc
dt-bindings: interrupt-controller: qcom-pdc: add compatible for sa8775p
dt-bindings: reset: remove stih415/stih416 reset
dt-bindings: net: dwmac: sti: remove stih415/sti416/stid127
dt-bindings: irqchip: sti: remove stih415/stih416 and stid127
dt-bindings: iommu: Convert QCOM IOMMU to YAML
dt-bindings: irqchip: ti,sci-inta: Add optional power-domains property
dt-bindings: Add missing (unevaluated|additional)Properties on child node schemas
of: address: Reshuffle to remove forward declarations
of: address: Fix documented return value of of_pci_range_to_resource()
of: address: Document return value of of_address_to_resource()
...
|
|
The RZ/G2L multi-function timer pulse unit 3 (MTU3a) is embedded in
the Renesas RZ/G2L family SoC's. It consists of eight 16-bit timer
channels and one 32-bit timer channel. It supports the following
functions
- Counter
- Timer
- PWM
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230330111632.169434-2-biju.das.jz@bp.renesas.com
|
|
Add compatible string for Rockchip RK3588 timer.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20230419181309.338354-3-cristian.ciocaltea@collabora.com
|
|
The compatible string for Rockchip RK3288 is wrongly provided in the
'enum' item, in addition to the subsequent 'const', which allows the
usage of an incorrect specification:
compatible = "rockchip,rk3288-timer", "rockchip,rk3288-timer";
As the rk3288 string is also specified in the top-most 'const' item, the
binding already allows the usage of the correct variant:
compatible = "rockchip,rk3288-timer";
Drop the unwanted rk3288 entry from the enum.
Fixes: faa186adbd06 ("dt-bindings: timer: convert rockchip,rk-timer.txt to YAML")
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20230419181309.338354-2-cristian.ciocaltea@collabora.com
|
|
Cleanup bindings dropping unneeded quotes. Once all these are fixed,
checking for this can be enabled in yamllint.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20230327170146.4104556-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Add compatible string for the StarFive JH7110 clint.
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
|
|
Convert the Amlogic Meson6 SoCs Timer Controller bindings to dt-schema.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20221117-b4-amlogic-bindings-convert-v5-1-63781bed4452@linaro.org
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
git://www.linux-watchdog.org/linux-watchdog
Pull watchdog updates from Wim Van Sebroeck:
- qcom-wdt dt-bindings improvements and additions (like MSM8994 and
MDM9615)
- mtk_wdt: Add reset_by_toprgu support
- devm_clk_get_enabled() helper changes
- Fix kmemleak in watchdog_cdev_register
- watchdog sysfs improvements
- Other fixes and small improvements
* tag 'linux-watchdog-6.3-rc1' of git://www.linux-watchdog.org/linux-watchdog: (52 commits)
watchdog: at91rm9200: Only warn once about problems in .remove()
watchdog: mt7621-wdt: avoid ralink architecture dependent code
watchdog: mt7621-wdt: avoid static global declarations
dt-bindings: watchdog: mt7621-wdt: add phandle to access system controller registers
watchdog: sbsa_wdog: Make sure the timeout programming is within the limits
dt-bindings: watchdog: qcom-wdt: add qcom,apss-wdt-sa8775p compatible
watchdog: report options in sysfs
watchdog: report fw_version in sysfs
dt-bindings: watchdog: fsl-imx: document suspend in wait mode
watchdog: imx2_wdg: suspend watchdog in WAIT mode
watchdog: pcwd_usb: Fix attempting to access uninitialized memory
dt-bindings: watchdog: qcom-wdt: merge MSM timer
dt-bindings: watchdog: qcom-wdt: allow interrupts
dt-bindings: watchdog: qcom-wdt: add qcom,kpss-wdt-mdm9615
dt-bindings: watchdog: qcom-wdt: fix list of MSM timer compatibles
dt-bindings: watchdog: qcom-wdt: do not allow fallback alone
dt-bindings: watchdog: qcom-wdt: require fallback for IPQ4019
watchdog: Fix kmemleak in watchdog_cdev_register
watchdog: Include <linux/kstrtox.h> when appropriate
watchdog: at91sam9_wdt: use devm_request_irq to avoid missing free_irq() in error path
...
|
|
Merge Qualcomm MSM timer bindings into watchdog, because the timer
compatibles are already included here and the hardware is quite similar.
While converting the MSM timer bindings, adjust clock-frequency
property to take only one frequency, instead of two, because:
1. DT schema does not allow to frequencies,
2. The Linux timer driver reads only first frequency.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20221212163532.142533-6-krzysztof.kozlowski@linaro.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
T-Head C906/C910 CLINT is not compliant to SiFive ones (and even not
compliant to the newcoming ACLINT spec) because of lack of mtime
register.
Add a compatible string formatted like the C9xx-specific PLIC
compatible, and do not allow a SiFive one as fallback because they're
not really compliant.
Signed-off-by: Icenowy Zheng <uwu@icenowy.me>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Samuel Holland <samuel@sholland.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230202072814.319903-1-uwu@icenowy.me
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Add binding description for mediatek,mt8365-systimer
Signed-off-by: Bernhard Rosenkränzer <bero@baylibre.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230125143503.1015424-8-bero@baylibre.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
We add DT bindings for a separate RISC-V timer DT node which can
be used to describe implementation specific behaviour (such as
timer interrupt not triggered during non-retentive suspend).
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Link: https://lore.kernel.org/r/20230103141102.772228-3-apatel@ventanamicro.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
|
|
Add rockchip timer compatible string for rockchip rv1126.
Signed-off-by: Jagan Teki <jagan@edgeble.ai>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20221123183124.6911-3-jagan@edgeble.ai
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"New Drivers:
- Add support for Ampere Computing SMpro
- Add support for TI TPS65219 PMIC
New Functionality:
- Add support for multiple devices of the same type; rk808
Fix-ups:
- Convert a bunch of I2C class drivers over to .probe_new()
- Remove superfluous includes; mc13xxx-*, palmas, timberdale
- Use correct includes for GPIO handling; madera-core
- Convert to GPIOD; twl6040
- Remove unused platform data handling; twl6040
- Device Tree changes; many
- Remove unused drivers; dm355evm_msp, davinci_voicecodec, htc-i2cpld
- Add support for modules; palmas
- Enable COMPILE_TEST support; intel_soc_pmic*
- Trivial: spelling / whitespace fixes; mc13xxx-spi
- Replace old PM helpers with new ones; many
- Convert deprecated mask_invert usage to unmask_base; many
- Use devm_*() calls; qcom_rpm
- MAINTAINER fix-ups
- Make use of improved / replaced APIs; palmas, fsl-imx25-tsadc,
stm32-lptimer, qcom_rpm, rohm-*
Bug Fixes:
- Add bounds / error checking; mt6360-core
- No sleeping inside critical sections; axp20x
- Fix missing dependencies; ROHM_BD957XMUF
- Repair error paths; qcom-pm8008"
* tag 'mfd-next-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (161 commits)
dt-bindings: mfd: da9062: Correct file name for watchdog
mfd: pm8008: Fix return value check in pm8008_probe()
mfd: rohm: Use dev_err_probe()
mfd: Drop obsolete dependencies on COMPILE_TEST
dt-bindings: mfd: da9062: Move IRQ to optional properties
mfd: qcom_rpm: Use devm_of_platform_populate() to simplify code
mfd: qcom_rpm: Fix an error handling path in qcom_rpm_probe()
mfd: stm32-lptimer: Use devm_platform_get_and_ioremap_resource()
mfd: rohm-bd9576: Convert to i2c's .probe_new()
mfd: fsl-imx25-tsadc: Use devm_platform_get_and_ioremap_resource()
dt-bindings: Fix maintainer email for a few ROHM ICs
mfd: palmas: Use device_get_match_data() to simplify the code
Input: Add tps65219 interrupt driven powerbutton
mfd: tps65219: Add driver for TI TPS65219 PMIC
mfd: bd957x: Fix Kconfig dependency on REGMAP_IRQ
mfd: wcd934x: Convert irq chip to config regs
mfd: tps65090: Replace irqchip mask_invert with unmask_base
mfd: sun4i-gpadc: Replace irqchip mask_invert with unmask_base
mfd: stpmic1: Fix swapped mask/unmask in irq chip
mfd: sprd-sc27xx-spi: Replace irqchip mask_invert with unmask_base
...
|