summaryrefslogtreecommitdiff
path: root/Documentation/devicetree/bindings
AgeCommit message (Collapse)Author
2021-10-26dt-bindings: phy: qcom,qmp: Add QCM2290 USB3 PHYShawn Guo
Add support for USB3 PHY found on Qualcomm QCM2290 SoC. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20210927064829.5752-2-shawn.guo@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-10-05dt-bindings: phy: qcom,qusb2: Add missing vdd-supplyShawn Guo
Besides vdda-pll and vdda-phy-dpdm, vdd-supply is a required supply for PHY digital circuit operation. Add it for correctness and completeness. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20210928022002.26286-2-shawn.guo@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-10-01dt-bindings: phy: brcm,ns-usb2-phy: bind just a PHY blockRafał Miłecki
The old binding was covering the whole DMU block space (DMU block contains CRU block which contains USB PHY). It was a bad design, overkill and a non-generic solution. Northstar's USB 2.0 PHY is a small block (part of the CRU MFD) and binding should be designed to represent that properly. Rework the binding to map just PHY with the "reg" property and use syscon to reference shared register that controls block access. The old binding is deprecated now. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20210913080024.6951-2-zajec5@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-10-01dt-bindings: phy: qcom,qusb2: Add compatible for QCM2290Shawn Guo
Add compatible for QUSB2 PHY on QCM2290 platform. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20210919031110.25064-2-shawn.guo@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-10-01dt-bindings: phy: qcom,qmp: Update maintainer emailShawn Guo
Manu's codeaurora.org email address bounces. Before he comes back with his new email, fill Vinod's address in there. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Link: https://lore.kernel.org/r/20210927071639.6225-1-shawnguo@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-09-12Merge tag 'auxdisplay-for-linus-v5.15-rc1' of git://github.com/ojeda/linuxLinus Torvalds
Pull auxdisplay updates from Miguel Ojeda: "An assortment of improvements for auxdisplay: - Replace symbolic permissions with octal permissions (Jinchao Wang) - ks0108: Switch to use module_parport_driver() (Andy Shevchenko) - charlcd: Drop unneeded initializers and switch to C99 style (Andy Shevchenko) - hd44780: Fix oops on module unloading (Lars Poeschel) - Add I2C gpio expander example (Ralf Schlatterbeck)" * tag 'auxdisplay-for-linus-v5.15-rc1' of git://github.com/ojeda/linux: auxdisplay: Replace symbolic permissions with octal permissions auxdisplay: ks0108: Switch to use module_parport_driver() auxdisplay: charlcd: Drop unneeded initializers and switch to C99 style auxdisplay: hd44780: Fix oops on module unloading auxdisplay: Add I2C gpio expander example
2021-09-11Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds
Pull virtio updates from Michael Tsirkin: - vduse driver ("vDPA Device in Userspace") supporting emulated virtio block devices - virtio-vsock support for end of record with SEQPACKET - vdpa: mac and mq support for ifcvf and mlx5 - vdpa: management netlink for ifcvf - virtio-i2c, gpio dt bindings - misc fixes and cleanups * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (39 commits) Documentation: Add documentation for VDUSE vduse: Introduce VDUSE - vDPA Device in Userspace vduse: Implement an MMU-based software IOTLB vdpa: Support transferring virtual addressing during DMA mapping vdpa: factor out vhost_vdpa_pa_map() and vhost_vdpa_pa_unmap() vdpa: Add an opaque pointer for vdpa_config_ops.dma_map() vhost-iotlb: Add an opaque pointer for vhost IOTLB vhost-vdpa: Handle the failure of vdpa_reset() vdpa: Add reset callback in vdpa_config_ops vdpa: Fix some coding style issues file: Export receive_fd() to modules eventfd: Export eventfd_wake_count to modules iova: Export alloc_iova_fast() and free_iova_fast() virtio-blk: remove unneeded "likely" statements virtio-balloon: Use virtio_find_vqs() helper vdpa: Make use of PFN_PHYS/PFN_UP/PFN_DOWN helper macro vsock_test: update message bounds test for MSG_EOR af_vsock: rename variables in receive loop virtio/vsock: support MSG_EOR bit processing vhost/vsock: support MSG_EOR bit processing ...
2021-09-11Merge tag 'devicetree-fixes-for-5.15-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull devicetree fixes from Rob Herring: - Disable fw_devlinks on x86 DT platforms to fix OLPC - More replacing oneOf+const with enum on a few new schemas - Drop unnecessary type references on Xilinx SPI binding schema * tag 'devicetree-fixes-for-5.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: spi: dt-bindings: xilinx: Drop type reference on *-bits properties dt-bindings: More use 'enum' instead of 'oneOf' plus 'const' entries of: property: Disable fw_devlink DT support for X86
2021-09-11Merge tag 'rtc-5.15' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux Pull RTC updates from Alexandre Belloni: "The broken down time conversion is similar to what is done in the time subsystem since v5.14. The rest is fairly straightforward. Subsystem: - Switch to Neri and Schneider time conversion algorithm Drivers: - rx8025: add rx8035 support - s5m: modernize driver and set range" * tag 'rtc-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: rtc: rx8010: select REGMAP_I2C dt-bindings: rtc: add Epson RX-8025 and RX-8035 rtc: rx8025: implement RX-8035 support rtc: cmos: remove stale REVISIT comments rtc: tps65910: Correct driver module alias rtc: move RTC_LIB_KUNIT_TEST to proper location rtc: lib_test: add MODULE_LICENSE rtc: Improve performance of rtc_time64_to_tm(). Add tests. rtc: s5m: set range rtc: s5m: enable wakeup only when available rtc: s5m: signal the core when alarm are not available rtc: s5m: switch to devm_rtc_allocate_device
2021-09-11Merge tag 'pwm/for-5.15-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm Pull pwm updates from Thierry Reding: "The changes this time around are mostly janitorial in nature. A lot of this is simplifications of drivers using device-managed functions and improving compilation coverage. The Mediatek display PWM driver now supports the atomic API. Cleanups and minor fixes make up the remainder of this set" * tag 'pwm/for-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (54 commits) pwm: mtk-disp: Implement atomic API .get_state() pwm: mtk-disp: Fix overflow in period and duty calculation pwm: mtk-disp: Implement atomic API .apply() pwm: mtk-disp: Adjust the clocks to avoid them mismatch dt-bindings: pwm: rockchip: Add description for rk3568 pwm: Make pwmchip_remove() return void pwm: sun4i: Don't check the return code of pwmchip_remove() pwm: sifive: Don't check the return code of pwmchip_remove() pwm: samsung: Don't check the return code of pwmchip_remove() pwm: renesas-tpu: Don't check the return code of pwmchip_remove() pwm: rcar: Don't check the return code of pwmchip_remove() pwm: pca9685: Don't check the return code of pwmchip_remove() pwm: omap-dmtimer: Don't check the return code of pwmchip_remove() pwm: mtk-disp: Don't check the return code of pwmchip_remove() pwm: imx-tpm: Don't check the return code of pwmchip_remove() pwm: img: Don't check the return code of pwmchip_remove() pwm: cros-ec: Don't check the return code of pwmchip_remove() pwm: brcmstb: Don't check the return code of pwmchip_remove() pwm: atmel-tcb: Don't check the return code of pwmchip_remove() pwm: atmel-hlcdc: Don't check the return code of pwmchip_remove() ...
2021-09-11Merge tag 'thermal-v5.15-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux Pull thermal updates from Daniel Lezcano: - Add the tegra3 thermal sensor and fix the compilation testing on tegra by adding a dependency on ARCH_TEGRA along with COMPILE_TEST (Dmitry Osipenko) - Fix the error code for the exynos when devm_get_clk() fails (Dan Carpenter) - Add the TCC cooling support for AlderLake platform (Sumeet Pawnikar) - Add support for hardware trip points for the rcar gen3 thermal driver and store TSC id as unsigned int (Niklas Söderlund) - Replace the deprecated CPU-hotplug functions get_online_cpus() and put_online_cpus (Sebastian Andrzej Siewior) - Add the thermal tools directory in the MAINTAINERS file (Daniel Lezcano) - Fix the Makefile and the cross compilation flags for the userspace 'tmon' tool (Rolf Eike Beer) - Allow to use the IMOK independently from the GDDV on Int340x (Sumeet Pawnikar) - Fix the stub thermal_cooling_device_register() function prototype which does not match the real function (Arnd Bergmann) - Make the thermal trip point optional in the DT bindings (Maxime Ripard) - Fix a typo in a comment in the core code (Geert Uytterhoeven) - Reduce the verbosity of the trace in the SoC thermal tegra driver (Dmitry Osipenko) - Add the support for the LMh (Limit Management hardware) driver on the QCom platforms (Thara Gopinath) - Allow processing of HWP interrupt by adding a weak function in the Intel driver (Srinivas Pandruvada) - Prevent an abort of the sensor probe is a channel is not used (Matthias Kaehlcke) * tag 'thermal-v5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux: thermal/drivers/qcom/spmi-adc-tm5: Don't abort probing if a sensor is not used thermal/drivers/intel: Allow processing of HWP interrupt dt-bindings: thermal: Add dt binding for QCOM LMh thermal/drivers/qcom: Add support for LMh driver firmware: qcom_scm: Introduce SCM calls to access LMh thermal/drivers/tegra-soctherm: Silence message about clamped temperature thermal: Spelling s/scallbacks/callbacks/ dt-bindings: thermal: Make trips node optional thermal/core: Fix thermal_cooling_device_register() prototype thermal/drivers/int340x: Use IMOK independently tools/thermal/tmon: Add cross compiling support thermal/tools/tmon: Improve the Makefile MAINTAINERS: Add missing userspace thermal tools to the thermal section thermal/drivers/intel_powerclamp: Replace deprecated CPU-hotplug functions. thermal/drivers/rcar_gen3_thermal: Store TSC id as unsigned int thermal/drivers/rcar_gen3_thermal: Add support for hardware trip points drivers/thermal/intel: Add TCC cooling support for AlderLake platform thermal/drivers/exynos: Fix an error code in exynos_tmu_probe() thermal/drivers/tegra: Correct compile-testing of drivers thermal/drivers/tegra: Add driver for Tegra30 thermal sensor
2021-09-11Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: - several device tree bindings for input devices have been converted to yaml - dropped no longer used ixp4xx-beeper and CSR Prima2 PWRC drivers - analog joystick has been converted to use ktime API and no longer warn about low resolution timers - a few driver fixes * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (24 commits) Input: analog - always use ktime functions Input: mms114 - support MMS134S Input: elan_i2c - reduce the resume time for controller in Whitebox Input: edt-ft5x06 - added case for EDT EP0110M09 Input: adc-keys - drop bogus __refdata annotation Input: Fix spelling mistake in Kconfig "useable" -> "usable" Input: Fix spelling mistake in Kconfig "Modul" -> "Module" Input: remove dead CSR Prima2 PWRC driver Input: adp5589-keys - use the right header Input: adp5588-keys - use the right header dt-bindings: input: tsc2005: Convert to YAML schema Input: ep93xx_keypad - prepare clock before using it dt-bindings: input: sun4i-lradc: Add wakeup-source dt-bindings: input: Convert Regulator Haptic binding to a schema dt-bindings: input: Convert Pixcir Touchscreen binding to a schema dt-bindings: input: Convert ChipOne ICN8318 binding to a schema Input: pm8941-pwrkey - fix comma vs semicolon issue dt-bindings: power: reset: qcom-pon: Convert qcom PON binding to yaml dt-bindings: input: pm8941-pwrkey: Convert pm8941 power key binding to yaml dt-bindings: power: reset: Change 'additionalProperties' to true ...
2021-09-10spi: dt-bindings: xilinx: Drop type reference on *-bits propertiesRob Herring
Properties with standard unit suffixes such as '-bits' don't need a type. Cc: Mark Brown <broonie@kernel.org> Cc: Michal Simek <michal.simek@xilinx.com> Cc: linux-spi@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Rob Herring <robh@kernel.org> Acked-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20210910165945.2852999-1-robh@kernel.org
2021-09-10dt-bindings: More use 'enum' instead of 'oneOf' plus 'const' entriesRob Herring
'enum' is equivalent to 'oneOf' with a list of 'const' entries, but 'enum' is more concise and yields better error messages. Fix a couple more cases which have appeared. Cc: Rob Clark <robdclark@gmail.com> Cc: Sean Paul <sean@poorly.run> Cc: Mark Brown <broonie@kernel.org> Cc: Wim Van Sebroeck <wim@linux-watchdog.org> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Jonathan Marek <jonathan@marek.ca> Cc: Aswath Govindraju <a-govindraju@ti.com> Cc: Marc Zyngier <maz@kernel.org> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: dri-devel@lists.freedesktop.org Cc: freedreno@lists.freedesktop.org Cc: linux-spi@vger.kernel.org Cc: linux-watchdog@vger.kernel.org Signed-off-by: Rob Herring <robh@kernel.org> Acked-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20210910165153.2843871-1-robh@kernel.org
2021-09-09Merge tag 'sound-fix-5.15-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "A collection of small fixes that have been gathered before rc1, including a few regression fixes for the problem in the previous pull request" * tag 'sound-fix-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: gus: Fix repeated probe for ISA interwave card ALSA: gus: Fix repeated probes of snd_gus_create() ALSA: vx222: fix null-ptr-deref ASoC: rockchip: i2s: Fix concurrency between tx/rx ASoC: mt8195: correct the dts parsing logic about DPTX and HDMITX ASoC: Intel: boards: Fix CONFIG_SND_SOC_SDW_MOCKUP select ASoC: dt-bindings: fsl_rpmsg: Add compatible string for i.MX8ULP ALSA: usb-audio: Add registration quirk for JBL Quantum 800 ASoC: rt5682: fix headset background noise when S3 state ASoC: dt-bindings: mt8195: remove dependent headers in the example ASoC: mediatek: SND_SOC_MT8195 should depend on ARCH_MEDIATEK ASoC: samsung: s3c24xx_simtec: fix spelling mistake "devicec" -> "device" ASoC: audio-graph: respawn Platform Support ASoC: mediatek: mt8195: add MTK_PMIC_WRAP dependency
2021-09-09Merge tag 'dmaengine-5.15-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine Pull dmaengine updates from Vinod Koul: "New drivers/devices - Support for Renesas RZ/G2L dma controller - New driver for AMD PTDMA controller Updates: - Big pile of idxd updates - Updates for Altera driver, stm32-dma, dw etc" * tag 'dmaengine-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (83 commits) dmaengine: sh: fix some NULL dereferences dmaengine: sh: Fix unused initialization of pointer lmdesc MAINTAINERS: Fix AMD PTDMA DRIVER entry dmaengine: ptdma: remove PT_OFFSET to avoid redefnition dmaengine: ptdma: Add debugfs entries for PTDMA dmaengine: ptdma: register PTDMA controller as a DMA resource dmaengine: ptdma: Initial driver for the AMD PTDMA dmaengine: fsl-dpaa2-qdma: Fix spelling mistake "faile" -> "failed" dmaengine: idxd: remove interrupt disable for dev_lock dmaengine: idxd: remove interrupt disable for cmd_lock dmaengine: idxd: fix setting up priv mode for dwq dmaengine: xilinx_dma: Set DMA mask for coherent APIs dmaengine: ti: k3-psil-j721e: Add entry for CSI2RX dmaengine: sh: Add DMAC driver for RZ/G2L SoC dmaengine: Extend the dma_slave_width for 128 bytes dt-bindings: dma: Document RZ/G2L bindings dmaengine: ioat: depends on !UML dmaengine: idxd: set descriptor allocation size to threshold for swq dmaengine: idxd: make submit failure path consistent on desc freeing dmaengine: idxd: remove interrupt flag for completion list spinlock ...
2021-09-08Merge tag 'pm-5.15-rc1-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull more power management updates from Rafael Wysocki: "These are mostly ARM cpufreq driver updates, including one new MediaTek driver that has just passed all of the reviews, with the addition of a revert of a recent intel_pstate commit, some core cpufreq changes and a DT-related update of the operating performance points (OPP) support code. Specifics: - Add new cpufreq driver for the MediaTek MT6779 platform called mediatek-hw along with corresponding DT bindings (Hector.Yuan). - Add DCVS interrupt support to the qcom-cpufreq-hw driver (Thara Gopinath). - Make the qcom-cpufreq-hw driver set the dvfs_possible_from_any_cpu policy flag (Taniya Das). - Blocklist more Qualcomm platforms in cpufreq-dt-platdev (Bjorn Andersson). - Make the vexpress cpufreq driver set the CPUFREQ_IS_COOLING_DEV flag (Viresh Kumar). - Add new cpufreq driver callback to allow drivers to register with the Energy Model in a consistent way and make several drivers use it (Viresh Kumar). - Change the remaining users of the .ready() cpufreq driver callback to move the code from it elsewhere and drop it from the cpufreq core (Viresh Kumar). - Revert recent intel_pstate change adding HWP guaranteed performance change notification support to it that led to problems, because the notification in question is triggered prematurely on some systems (Rafael Wysocki). - Convert the OPP DT bindings to DT schema and clean them up while at it (Rob Herring)" * tag 'pm-5.15-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (23 commits) Revert "cpufreq: intel_pstate: Process HWP Guaranteed change notification" cpufreq: mediatek-hw: Add support for CPUFREQ HW cpufreq: Add of_perf_domain_get_sharing_cpumask dt-bindings: cpufreq: add bindings for MediaTek cpufreq HW cpufreq: Remove ready() callback cpufreq: sh: Remove sh_cpufreq_cpu_ready() cpufreq: acpi: Remove acpi_cpufreq_cpu_ready() cpufreq: qcom-hw: Set dvfs_possible_from_any_cpu cpufreq driver flag cpufreq: blocklist more Qualcomm platforms in cpufreq-dt-platdev cpufreq: qcom-cpufreq-hw: Add dcvs interrupt support cpufreq: scmi: Use .register_em() to register with energy model cpufreq: vexpress: Use .register_em() to register with energy model cpufreq: scpi: Use .register_em() to register with energy model dt-bindings: opp: Convert to DT schema dt-bindings: Clean-up OPP binding node names in examples ARM: dts: omap: Drop references to opp.txt cpufreq: qcom-cpufreq-hw: Use .register_em() to register with energy model cpufreq: omap: Use .register_em() to register with energy model cpufreq: mediatek: Use .register_em() to register with energy model cpufreq: imx6q: Use .register_em() to register with energy model ...
2021-09-08Merge branch 'pm-opp'Rafael J. Wysocki
* pm-opp: dt-bindings: opp: Convert to DT schema dt-bindings: Clean-up OPP binding node names in examples ARM: dts: omap: Drop references to opp.txt
2021-09-08Merge branch 'pm-cpufreq'Rafael J. Wysocki
* pm-cpufreq: Revert "cpufreq: intel_pstate: Process HWP Guaranteed change notification" cpufreq: mediatek-hw: Add support for CPUFREQ HW cpufreq: Add of_perf_domain_get_sharing_cpumask dt-bindings: cpufreq: add bindings for MediaTek cpufreq HW cpufreq: Remove ready() callback cpufreq: sh: Remove sh_cpufreq_cpu_ready() cpufreq: acpi: Remove acpi_cpufreq_cpu_ready() cpufreq: qcom-hw: Set dvfs_possible_from_any_cpu cpufreq driver flag cpufreq: blocklist more Qualcomm platforms in cpufreq-dt-platdev cpufreq: qcom-cpufreq-hw: Add dcvs interrupt support cpufreq: scmi: Use .register_em() to register with energy model cpufreq: vexpress: Use .register_em() to register with energy model cpufreq: scpi: Use .register_em() to register with energy model cpufreq: qcom-cpufreq-hw: Use .register_em() to register with energy model cpufreq: omap: Use .register_em() to register with energy model cpufreq: mediatek: Use .register_em() to register with energy model cpufreq: imx6q: Use .register_em() to register with energy model cpufreq: dt: Use .register_em() to register with energy model cpufreq: Add callback to register with energy model cpufreq: vexpress: Set CPUFREQ_IS_COOLING_DEV flag
2021-09-07Merge tag 'pci-v5.15-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "Enumeration: - Convert controller drivers to generic_handle_domain_irq() (Marc Zyngier) - Simplify VPD (Vital Product Data) access and search (Heiner Kallweit) - Update bnx2, bnx2x, bnxt, cxgb4, cxlflash, sfc, tg3 drivers to use simplified VPD interfaces (Heiner Kallweit) - Run Max Payload Size quirks before configuring MPS; work around ASMedia ASM1062 SATA MPS issue (Marek Behún) Resource management: - Refactor pci_ioremap_bar() and pci_ioremap_wc_bar() (Krzysztof Wilczyński) - Optimize pci_resource_len() to reduce kernel size (Zhen Lei) PCI device hotplug: - Fix a double unmap in ibmphp (Vishal Aslot) PCIe port driver: - Enable Bandwidth Notification only if port supports it (Stuart Hayes) Sysfs/proc/syscalls: - Add schedule point in proc_bus_pci_read() (Krzysztof Wilczyński) - Return ~0 data on pciconfig_read() CAP_SYS_ADMIN failure (Krzysztof Wilczyński) - Return "int" from pciconfig_read() syscall (Krzysztof Wilczyński) Virtualization: - Extend "pci=noats" to also turn on Translation Blocking to protect against some DMA attacks (Alex Williamson) - Add sysfs mechanism to control the type of reset used between device assignments to VMs (Amey Narkhede) - Add support for ACPI _RST reset method (Shanker Donthineni) - Add ACS quirks for Cavium multi-function devices (George Cherian) - Add ACS quirks for NXP LX2xx0 and LX2xx2 platforms (Wasim Khan) - Allow HiSilicon AMBA devices that appear as fake PCI devices to use PASID and SVA (Zhangfei Gao) Endpoint framework: - Add support for SR-IOV Endpoint devices (Kishon Vijay Abraham I) - Zero-initialize endpoint test tool parameters so we don't use random parameters (Shunyong Yang) APM X-Gene PCIe controller driver: - Remove redundant dev_err() call in xgene_msi_probe() (ErKun Yang) Broadcom iProc PCIe controller driver: - Don't fail devm_pci_alloc_host_bridge() on missing 'ranges' because it's optional on BCMA devices (Rob Herring) - Fix BCMA probe resource handling (Rob Herring) Cadence PCIe driver: - Work around J7200 Link training electrical issue by increasing delays in LTSSM (Nadeem Athani) Intel IXP4xx PCI controller driver: - Depend on ARCH_IXP4XX to avoid useless config questions (Geert Uytterhoeven) Intel Keembay PCIe controller driver: - Add Intel Keem Bay PCIe controller (Srikanth Thokala) Marvell Aardvark PCIe controller driver: - Work around config space completion handling issues (Evan Wang) - Increase timeout for config access completions (Pali Rohár) - Emulate CRS Software Visibility bit (Pali Rohár) - Configure resources from DT 'ranges' property to fix I/O space access (Pali Rohár) - Serialize INTx mask/unmask (Pali Rohár) MediaTek PCIe controller driver: - Add MT7629 support in DT (Chuanjia Liu) - Fix an MSI issue (Chuanjia Liu) - Get syscon regmap ("mediatek,generic-pciecfg"), IRQ number ("pci_irq"), PCI domain ("linux,pci-domain") from DT properties if present (Chuanjia Liu) Microsoft Hyper-V host bridge driver: - Add ARM64 support (Boqun Feng) - Support "Create Interrupt v3" message (Sunil Muthuswamy) NVIDIA Tegra PCIe controller driver: - Use seq_puts(), move err_msg from stack to static, fix OF node leak (Christophe JAILLET) NVIDIA Tegra194 PCIe driver: - Disable suspend when in Endpoint mode (Om Prakash Singh) - Fix MSI-X address programming error (Om Prakash Singh) - Disable interrupts during suspend to avoid spurious AER link down (Om Prakash Singh) Renesas R-Car PCIe controller driver: - Work around hardware issue that prevents Link L1->L0 transition (Marek Vasut) - Fix runtime PM refcount leak (Dinghao Liu) Rockchip DesignWare PCIe controller driver: - Add Rockchip RK356X host controller driver (Simon Xue) TI J721E PCIe driver: - Add support for J7200 and AM64 (Kishon Vijay Abraham I) Toshiba Visconti PCIe controller driver: - Add Toshiba Visconti PCIe host controller driver (Nobuhiro Iwamatsu) Xilinx NWL PCIe controller driver: - Enable PCIe reference clock via CCF (Hyun Kwon) Miscellaneous: - Convert sta2x11 from 'pci_' to 'dma_' API (Christophe JAILLET) - Fix pci_dev_str_match_path() alloc while atomic bug (used for kernel parameters that specify devices) (Dan Carpenter) - Remove pointless Precision Time Management warning when PTM is present but not enabled (Jakub Kicinski) - Remove surplus "break" statements (Krzysztof Wilczyński)" * tag 'pci-v5.15-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (132 commits) PCI: ibmphp: Fix double unmap of io_mem x86/PCI: sta2x11: switch from 'pci_' to 'dma_' API PCI/VPD: Use unaligned access helpers PCI/VPD: Clean up public VPD defines and inline functions cxgb4: Use pci_vpd_find_id_string() to find VPD ID string PCI/VPD: Add pci_vpd_find_id_string() PCI/VPD: Include post-processing in pci_vpd_find_tag() PCI/VPD: Stop exporting pci_vpd_find_info_keyword() PCI/VPD: Stop exporting pci_vpd_find_tag() PCI: Set dma-can-stall for HiSilicon chips PCI: rockchip-dwc: Add Rockchip RK356X host controller driver PCI: dwc: Remove surplus break statement after return PCI: artpec6: Remove local code block from switch statement PCI: artpec6: Remove surplus break statement after return MAINTAINERS: Add entries for Toshiba Visconti PCIe controller PCI: visconti: Add Toshiba Visconti PCIe host controller driver PCI/portdrv: Enable Bandwidth Notification only if port supports it PCI: Allow PASID on fake PCIe devices without TLP prefixes PCI: mediatek: Use PCI domain to handle ports detection PCI: mediatek: Add new method to get irq number ...
2021-09-07Merge tag 'linux-watchdog-5.15-rc1' of ↵Linus Torvalds
git://www.linux-watchdog.org/linux-watchdog Pull watchdog updates from Wim Van Sebroeck: - add Mediatek MT7986 & MT8195 wdt support - add Maxim MAX63xx - drop bd70528 support - rewrite ixp4xx to watchdog framework - constify static struct watchdog_ops for sl28cpld_wdt, mpc8xxx_wdt and tqmx86 - introduce watchdog_dev_suspend/resume - several fixes and improvements * tag 'linux-watchdog-5.15-rc1' of git://www.linux-watchdog.org/linux-watchdog: dt-bindings: watchdog: Add compatible for Mediatek MT7986 watchdog: ixp4xx: Rewrite driver to use core watchdog: Start watchdog in watchdog_set_last_hw_keepalive only if appropriate watchdog: max63xx_wdt: Add device tree probing dt-bindings: watchdog: Add Maxim MAX63xx bindings watchdog: mediatek: mt8195: add wdt support dt-bindings: reset: mt8195: add toprgu reset-controller header file watchdog: tqmx86: Constify static struct watchdog_ops watchdog: mpc8xxx_wdt: Constify static struct watchdog_ops watchdog: sl28cpld_wdt: Constify static struct watchdog_ops watchdog: iTCO_wdt: Fix detection of SMI-off case watchdog: bcm2835_wdt: consider system-power-controller property watchdog: imx2_wdg: notify wdog core to stop ping worker on suspend watchdog: introduce watchdog_dev_suspend/resume watchdog: Fix NULL pointer dereference when releasing cdev watchdog: only run driver set_pretimeout op if device supports it watchdog: bd70528 drop bd70528 support
2021-09-07Merge tag 'rproc-v5.15' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc Pull remoteproc updates from Bjorn Andersson: - move the crash recovery worker to the freezable work queue to avoid interaction with other drivers during suspend & resume - fix a couple of typos in comments - add support for handling the audio DSP on SDM660 - fix a race between the Qualcomm wireless subsystem driver and the associated driver for the RF chip * tag 'rproc-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc: remoteproc: q6v5_pas: Add sdm660 ADSP PIL compatible dt-bindings: remoteproc: qcom: adsp: Add SDM660 ADSP remoteproc: use freezable workqueue for crash notifications remoteproc: fix kernel doc for struct rproc_ops remoteproc: fix an typo in fw_elf_get_class code comments remoteproc: qcom: wcnss: Fix race with iris probe
2021-09-07Merge tag 'mfd-next-5.15' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: "Core Frameworks: - Add support for registering devices via MFD cells to Simple MFD (I2C) New Drivers: - Add support for Renesas Synchronization Management Unit (SMU) New Device Support: - Add support for N5010 to Intel M10 BMC - Add support for Cannon Lake to Intel LPSS ACPI - Add support for Samsung SSG{1,2} to ST-Ericsson's U8500 family - Add support for TQMx110EB and TQMxE40x to TQ-Systems PLD TQMx86 New Functionality: - Add support for GPIO to Intel LPC ICH - Add support for Reset to Texas Instruments TPS65086 Fix-ups: - Trivial, sorting, whitespace, renaming, etc; mt6360-core, db8500-prcmu-regs, tqmx86 - Device Tree fiddling; syscon, axp20x, qcom,pm8008, ti,tps65086, brcm,cru - Use proper APIs for IRQ map resolution; ab8500-core, stmpe, tc3589x, wm8994-irq - Pass 'supplied-from' property through axp288_fuel_gauge via swnode - Remove unused file entry; MAINTAINERS - Make interrupt line optional; tps65086 - Rename db8500-cpuidle driver symbol; db8500-prcmu - Remove support for unused hardware; tqmx86 - Provide a standard LPC clock frequency for unknown boards; tqmx86 - Remove unused code; ti_am335x_tscadc - Use of_iomap() instead of ioremap(); syscon Bug Fixes: - Clear GPIO IRQ resource flags when no IRQ is set; tqmx86 - Fix incorrect/misleading frequencies; db8500-prcmu - Mitigate namespace clash with other GPIOBASE users" * tag 'mfd-next-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (31 commits) mfd: lpc_sch: Rename GPIOBASE to prevent build error mfd: syscon: Use of_iomap() instead of ioremap() dt-bindings: mfd: Add Broadcom CRU mfd: ti_am335x_tscadc: Delete superfluous error message mfd: tqmx86: Assume 24MHz LPC clock for unknown boards mfd: tqmx86: Add support for TQ-Systems DMI IDs mfd: tqmx86: Add support for TQMx110EB and TQMxE40x mfd: tqmx86: Fix typo in "platform" mfd: tqmx86: Remove incorrect TQMx90UC board ID mfd: tqmx86: Clear GPIO IRQ resource when no IRQ is set mfd: simple-mfd-i2c: Add support for registering devices via MFD cells mfd/cpuidle: ux500: Rename driver symbol mfd: tps65086: Add cell entry for reset driver mfd: tps65086: Make interrupt line optional dt-bindings: mfd: Convert tps65086.txt to YAML MAINTAINERS: Adjust ARM/NOMADIK/Ux500 ARCHITECTURES to file renaming mfd: db8500-prcmu: Handle missing FW variant mfd: db8500-prcmu: Rename register header mfd: axp20x: Add supplied-from property to axp288_fuel_gauge cell mfd: Don't use irq_create_mapping() to resolve a mapping ...
2021-09-07Merge branch 'cpufreq/arm/linux-next' of ↵Rafael J. Wysocki
git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm Pull more ARM cpufreq changes for v5.15-rc1 from Viresh Kumar: "This adds a new cpufreq driver for Mediatek, which had been going through reviews since last one year." * 'cpufreq/arm/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm: cpufreq: mediatek-hw: Add support for CPUFREQ HW cpufreq: Add of_perf_domain_get_sharing_cpumask dt-bindings: cpufreq: add bindings for MediaTek cpufreq HW
2021-09-06dt-bindings: cpufreq: add bindings for MediaTek cpufreq HWHector.Yuan
Add devicetree bindings for MediaTek HW driver. Signed-off-by: Hector.Yuan <hector.yuan@mediatek.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2021-09-06dt-bindings: mfd: Add Broadcom CRURafał Miłecki
CRU is a block used in e.g. Northstar devices. It can be seen in the bcm5301x.dtsi and this binding documents its proper usage. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-09-05dt-bindings: gpio: Add bindings for gpio-virtioViresh Kumar
This patch adds binding for virtio GPIO controller, it is based on virtio-device bindings. Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Link: https://lore.kernel.org/r/acf7402ef4aabc0ad6295c32846f2bef1cd9b56a.1627362340.git.viresh.kumar@linaro.org Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Rob Herring <robh@kernel.org>
2021-09-05dt-bindings: i2c: Add bindings for i2c-virtioViresh Kumar
This patch adds binding for virtio I2C device, it is based on virtio-device bindings. Acked-by: Wolfram Sang <wsa@kernel.org> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Link: https://lore.kernel.org/r/33c317b95097ce491845c697db1e8285e3ec1d41.1627362340.git.viresh.kumar@linaro.org Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Rob Herring <robh@kernel.org>
2021-09-05dt-bindings: virtio: Add binding for virtio devicesViresh Kumar
Allow virtio device sub-nodes to be added to the virtio mmio or pci nodes. The compatible property for virtio device must be of the format "virtio,device<ID>", where ID is virtio device ID in hexadecimal format. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Link: https://lore.kernel.org/r/d8319fd18df7086b12cdcc23193c313893aa071a.1627362340.git.viresh.kumar@linaro.org Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Rob Herring <robh@kernel.org>
2021-09-05Merge tag 'riscv-for-linus-5.15-mw0' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull RISC-V updates from Palmer Dabbelt: - support PC-relative instructions (auipc and branches) in kprobes - support for forced IRQ threading - support for the hlt/nohlt kernel command line options, via the generic idle loop - show the edge/level triggered behavior of interrupts in /proc/interrupts - a handful of cleanups to our address mapping mechanisms - support for allocating gigantic hugepages via CMA - support for the undefined behavior sanitizer (UBSAN) - a handful of cleanups to the VDSO that allow the kernel to build with LLD. - support for hugepage migration * tag 'riscv-for-linus-5.15-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (21 commits) riscv: add support for hugepage migration RISC-V: Fix VDSO build for !MMU riscv: use strscpy to replace strlcpy riscv: explicitly use symbol offsets for VDSO riscv: Enable Undefined Behavior Sanitizer UBSAN riscv: Keep the riscv Kconfig selects sorted riscv: Support allocating gigantic hugepages using CMA riscv: fix the global name pfn_base confliction error riscv: Move early fdt mapping creation in its own function riscv: Simplify BUILTIN_DTB device tree mapping handling riscv: Use __maybe_unused instead of #ifdefs around variable declarations riscv: Get rid of map_size parameter to create_kernel_page_table riscv: Introduce va_kernel_pa_offset for 32-bit kernel riscv: Optimize kernel virtual address conversion macro dt-bindings: riscv: add starfive jh7100 bindings riscv: Enable GENERIC_IRQ_SHOW_LEVEL riscv: Enable idle generic idle loop riscv: Allow forced irq threading riscv: Implement thread_struct whitelist for hardened usercopy riscv: kprobes: implement the branch instructions ...
2021-09-05Merge tag 'mtd/for-5.15' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux Pull MTD updates from Miquel Raynal: "MTD changes: - blkdevs: - Simplify the refcounting in blktrans_{open, release} - Simplify blktrans_getgeo - Remove blktrans_ref_mutex - Simplify blktrans_dev_get - Use lockdep_assert_held - Don't hold del_mtd_blktrans_dev in blktrans_{open, release} - ftl: - Don't cast away the type when calling add_mtd_blktrans_dev - Don't cast away the type when calling add_mtd_blktrans_dev - Use container_of() rather than cast - Fix use-after-free - Add discard support - Allow use of MTD_RAM for testing purposes - concat: - Check _read, _write callbacks existence before assignment - Judge callback existence based on the master - maps: - Maps: remove dead MTD map driver for PMC-Sierra MSP boards - mtdblock: - Warn if added for a NAND device - Add comment about UBI block devices - Update old JFFS2 mention in Kconfig - partitions: - Redboot: convert to YAML NAND core changes: - Repair Miquel Raynal's email address in MAINTAINERS - Fix a couple of spelling mistakes in Kconfig - bbt: Skip bad blocks when searching for the BBT in NAND - Remove never changed ret variable Raw NAND changes: - cafe: Fix a resource leak in the error handling path of 'cafe_nand_probe()' - intel: Fix error handling in probe - omap: Fix kernel doc warning on 'calcuate' typo - gpmc: Fix the ECC bytes vs. OOB bytes equation SPI-NAND core changes: - Properly fill the OOB area. - Fix comment SPI-NAND drivers changes: - macronix: Add Quad support for serial NAND flash" * tag 'mtd/for-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (30 commits) mtd: rawnand: cafe: Fix a resource leak in the error handling path of 'cafe_nand_probe()' mtd_blkdevs: simplify the refcounting in blktrans_{open, release} mtd_blkdevs: simplify blktrans_getgeo mtd_blkdevs: remove blktrans_ref_mutex mtd_blkdevs: simplify blktrans_dev_get mtd/rfd_ftl: don't cast away the type when calling add_mtd_blktrans_dev mtd/ftl: don't cast away the type when calling add_mtd_blktrans_dev mtd_blkdevs: use lockdep_assert_held mtd_blkdevs: don't hold del_mtd_blktrans_dev in blktrans_{open, release} mtd: rawnand: intel: Fix error handling in probe mtd: mtdconcat: Check _read, _write callbacks existence before assignment mtd: mtdconcat: Judge callback existence based on the master mtd: maps: remove dead MTD map driver for PMC-Sierra MSP boards mtd: rfd_ftl: use container_of() rather than cast mtd: rfd_ftl: fix use-after-free mtd: rfd_ftl: add discard support mtd: rfd_ftl: allow use of MTD_RAM for testing purposes mtdblock: Warn if added for a NAND device mtd: spinand: macronix: Add Quad support for serial NAND flash mtdblock: Add comment about UBI block devices ...
2021-09-03Merge tag 'iommu-updates-v5.15' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull iommu updates from Joerg Roedel: - New DART IOMMU driver for Apple Silicon M1 chips - Optimizations for iommu_[map/unmap] performance - Selective TLB flush support for the AMD IOMMU driver to make it more efficient on emulated IOMMUs - Rework IOVA setup and default domain type setting to move more code out of IOMMU drivers and to support runtime switching between certain types of default domains - VT-d Updates from Lu Baolu: - Update the virtual command related registers - Enable Intel IOMMU scalable mode by default - Preset A/D bits for user space DMA usage - Allow devices to have more than 32 outstanding PRs - Various cleanups - ARM SMMU Updates from Will Deacon: SMMUv3: - Minor optimisation to avoid zeroing struct members on CMD submission - Increased use of batched commands to reduce submission latency - Refactoring in preparation for ECMDQ support SMMUv2: - Fix races when probing devices with identical StreamIDs - Optimise walk cache flushing for Qualcomm implementations - Allow deep sleep states for some Qualcomm SoCs with shared clocks - Various smaller optimizations, cleanups, and fixes * tag 'iommu-updates-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (85 commits) iommu/io-pgtable: Abstract iommu_iotlb_gather access iommu/arm-smmu: Fix missing unlock on error in arm_smmu_device_group() iommu/vt-d: Add present bit check in pasid entry setup helpers iommu/vt-d: Use pasid_pte_is_present() helper function iommu/vt-d: Drop the kernel doc annotation iommu/vt-d: Allow devices to have more than 32 outstanding PRs iommu/vt-d: Preset A/D bits for user space DMA usage iommu/vt-d: Enable Intel IOMMU scalable mode by default iommu/vt-d: Refactor Kconfig a bit iommu/vt-d: Remove unnecessary oom message iommu/vt-d: Update the virtual command related registers iommu: Allow enabling non-strict mode dynamically iommu: Merge strictness and domain type configs iommu: Only log strictness for DMA domains iommu: Expose DMA domain strictness via sysfs iommu: Express DMA strictness via the domain type iommu/vt-d: Prepare for multiple DMA domain types iommu/arm-smmu: Prepare for multiple DMA domain types iommu/amd: Prepare for multiple DMA domain types iommu: Introduce explicit type for non-strict DMA domains ...
2021-09-03Merge branch 'stable/for-linus-5.15' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb Pull swiotlb updates from Konrad Rzeszutek Wilk: "A new feature called restricted DMA pools. It allows SWIOTLB to utilize per-device (or per-platform) allocated memory pools instead of using the global one. The first big user of this is ARM Confidential Computing where the memory for DMA operations can be set per platform" * 'stable/for-linus-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb: (23 commits) swiotlb: use depends on for DMA_RESTRICTED_POOL of: restricted dma: Don't fail device probe on rmem init failure of: Move of_dma_set_restricted_buffer() into device.c powerpc/svm: Don't issue ultracalls if !mem_encrypt_active() s390/pv: fix the forcing of the swiotlb swiotlb: Free tbl memory in swiotlb_exit() swiotlb: Emit diagnostic in swiotlb_exit() swiotlb: Convert io_default_tlb_mem to static allocation of: Return success from of_dma_set_restricted_buffer() when !OF_ADDRESS swiotlb: add overflow checks to swiotlb_bounce swiotlb: fix implicit debugfs declarations of: Add plumbing for restricted DMA pool dt-bindings: of: Add restricted DMA pool swiotlb: Add restricted DMA pool initialization swiotlb: Add restricted DMA alloc/free support swiotlb: Refactor swiotlb_tbl_unmap_single swiotlb: Move alloc_size to swiotlb_find_slots swiotlb: Use is_swiotlb_force_bounce for swiotlb data bouncing swiotlb: Update is_swiotlb_active to add a struct device argument swiotlb: Update is_swiotlb_buffer to add a struct device argument ...
2021-09-03Merge tag 'nand/for-5.15' into mtd/nextMiquel Raynal
NAND core changes: * Repair Miquel Raynal's email address in MAINTAINERS * Fix a couple of spelling mistakes in Kconfig * bbt: Skip bad blocks when searching for the BBT in NAND * Remove never changed ret variable Raw NAND changes: * cafe: Fix a resource leak in the error handling path of 'cafe_nand_probe()' * intel: Fix error handling in probe * omap: Fix kernel doc warning on 'calcuate' typo * gpmc: Fix the ECC bytes vs. OOB bytes equation SPI-NAND core changes: * Properly fill the OOB area. * Fix comment SPI-NAND drivers changes: * macronix: Add Quad support for serial NAND flash
2021-09-02Merge tag 'pinctrl-v5.15-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "This is the bulk of pin control changes for the v5.15 kernel cycle, no core changes at all this time, just driver work! New drivers: - New subdriver for Intel Keem Bay (an ARM-based SoC) - New subdriver for Qualcomm MDM9607 and SM6115 - New subdriver for ST Microelectronics STM32MP135 - New subdriver for Freescale i.MX8ULP ("Ultra Low Power") - New subdriver for Ingenic X2100 - Support for Qualcomm PMC8180, PMC8180C, SA8155p-adp PMIC GPIO - Support Samsung Exynos850 - Support Renesas RZ/G2L Enhancements: - A major refactoring of the Rockchip driver, breaking part of it out to a separate GPIO driver in drivers/gpio - Pin bias support on Renesas r8a77995 - Add SCI pins support to Ingenic JZ4755 and JZ4760 - Mediatek device tree bindings converted to YAML" * tag 'pinctrl-v5.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (53 commits) pinctrl: renesas: Add RZ/G2L pin and gpio controller driver pinctrl: samsung: Add Exynos850 SoC specific data dt-bindings: pinctrl: samsung: Add Exynos850 doc MAINTAINERS: Add maintainers for amd-pinctrl driver pinctrl: Add Intel Keem Bay pinctrl driver dt-bindings: pinctrl: Add bindings for Intel Keembay pinctrl driver pinctrl: zynqmp: Drop pinctrl_unregister for devm_ registered device dt-bindings: pinctrl: qcom-pmic-gpio: Remove the interrupts property dt-bindings: pinctrl: qcom-pmic-gpio: Convert qcom pmic gpio bindings to YAML dt-bindings: pinctrl: mt8195: Use real world values for drive-strength arguments dt-bindings: mediatek: convert pinctrl to yaml arm: dts: mt8183: Move pinfunc to include/dt-bindings/pinctrl arm: dts: mt8135: Move pinfunc to include/dt-bindings/pinctrl pinctrl: ingenic: Add .max_register in regmap_config pinctrl: ingenic: Fix bias config for X2000(E) pinctrl: ingenic: Fix incorrect pull up/down info pinctrl: Ingenic: Add pinctrl driver for X2100. dt-bindings: pinctrl: Add bindings for Ingenic X2100. pinctrl: Ingenic: Add SSI pins support for JZ4755 and JZ4760. pinctrl: Ingenic: Improve the code. ...
2021-09-02Merge tag 'clk-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "Nothing changed in the clk framework core this time around. We did get some updates to the basic clk types to use determine_rate for the divider type and add a power of two fractional divider flag though. Otherwise, this is a collection of clk driver updates. More than half the diffstat is in the Qualcomm clk driver where we add a bunch of data to describe clks on various SoCs and fix bugs. The other big new thing in here is the Mediatek MT8192 clk driver. That's been under review for a while and it's nice to see that it's finally upstream. Beyond that it's the usual set of minor fixes and tweaks to clk drivers. There are some non-clk driver bits in here which have all been acked by the respective maintainers. New Drivers: - Support video, gpu, display clks on qcom sc7280 SoCs - GCC clks on qcom MSM8953, SM4250/6115, and SM6350 SoCs - Multimedia clks (MMCC) on qcom MSM8994/MSM8992 - RPMh clks on qcom SM6350 SoCs - Support for Mediatek MT8192 SoCs - Add display (DU and DSI) clocks on Renesas R-Car V3U - Add I2C, DMAC, USB, sound (SSIF-2), GPIO, CANFD, and ADC clocks and resets on Renesas RZ/G2L Updates: - Support the SD/OE pin on IDT VersaClock 5 and 6 clock generators - Add power of two flag to fractional divider clk type - Migrate some clk drivers to clk_divider_ops.determine_rate - Migrate to clk_parent_data in gcc-sdm660 - Fix CLKOUT clocks on i.MX8MM and i.MX8MN by using imx_clk_hw_mux2 - Switch from .round_rate to .determine_rate in clk-divider-gate - Fix clock tree update for TF-A controlled clocks for all i.MX8M - Add missing M7 core clock for i.MX8MN - YAML conversion of rk3399 clock controller binding - Removal of GRF dependency for the rk3328/rk3036 pll types - Drop CLK_IS_CRITICAL flag from Tegra fuse clk - Make CLK_R9A06G032 Kconfig symbol invisible - Convert various DT bindings to YAML" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (128 commits) dt-bindings: clock: samsung: fix header path in example clk: tegra: fix old-style declaration clk: qcom: Add SM6350 GCC driver MAINTAINERS: clock: include S3C and S5P in Samsung SoC clock entry dt-bindings: clock: samsung: convert S5Pv210 AudSS to dtschema dt-bindings: clock: samsung: convert Exynos AudSS to dtschema dt-bindings: clock: samsung: convert Exynos4 to dtschema dt-bindings: clock: samsung: convert Exynos3250 to dtschema dt-bindings: clock: samsung: convert Exynos542x to dtschema dt-bindings: clock: samsung: add bindings for Exynos external clock dt-bindings: clock: samsung: convert Exynos5250 to dtschema clk: vc5: Add properties for configuring SD/OE behavior clk: vc5: Use dev_err_probe dt-bindings: clk: vc5: Add properties for configuring the SD/OE pin dt-bindings: clock: brcm,iproc-clocks: fix armpll properties clk: zynqmp: Fix kernel-doc format clk: at91: clk-generated: Limit the requested rate to our range clk: ralink: avoid to set 'CLK_IS_CRITICAL' flag for gates clk: zynqmp: Fix a memory leak clk: zynqmp: Check the return type ...
2021-09-02Merge tag 'mailbox-v5.15' of ↵Linus Torvalds
git://git.linaro.org/landing-teams/working/fujitsu/integration Pull mailbox updates from Jassi Brar: - mtk: - added support for mt8192 and mt8195 - minor fix regarding address shift - qcom: - added compatibles for MSM8953, SM6350 and SM6115 - enable loading IPCC as a module - misc: - change Altera maintainer - fix sti kernel-doc warnings * tag 'mailbox-v5.15' of git://git.linaro.org/landing-teams/working/fujitsu/integration: mailbox: cmdq: add multi-gce clocks support for mt8195 mailbox: cmdq: add mediatek mailbox support for mt8195 dt-bindings: gce: add gce header file for mt8195 dt-bindings: mailbox: add definition for mt8195 mailbox: qcom-apcs-ipc: Add compatible for MSM8953 SoC dt-bindings: mailbox: Add compatible for the MSM8953 dt-bindings: mailbox: qcom-ipcc: Add compatible for SM6350 mailbox: qcom: Add support for SM6115 APCS IPC dt-bindings: mailbox: qcom: Add SM6115 APCS compatible soc: mediatek: cmdq: add address shift in jump mailbox: cmdq: add mt8192 support dt-binding: gce: add gce header file for mt8192 MAINTAINERS: Replace Ley Foon Tan as Altera Mailbox maintainer mailbox: qcom-ipcc: Enable loading QCOM_IPCC as a module mailbox: sti: quieten kernel-doc warnings
2021-09-02Merge branch 'remotes/lorenzo/pci/endpoint'Bjorn Helgaas
- Add max-virtual-functions to endpoint binding (Kishon Vijay Abraham I) - Add pci_epf_add_vepf() API to add virtual function to endpoint (Kishon Vijay Abraham I) - Add pci_epf_vepf_link() to link virtual function to endpoint physical function (Kishon Vijay Abraham I) - Add virtual function number to pci_epc_ops endpoint ops interfaces (Kishon Vijay Abraham I) - Simplify register base address computation for endpoint BAR configuration (Kishon Vijay Abraham I) - Add support to configure virtual functions in cadence endpoint driver (Kishon Vijay Abraham I) - Add SR-IOV configuration to endpoint test driver (Kishon Vijay Abraham I) - Document configfs usage to create virtual functions for endpoints (Kishon Vijay Abraham I) * remotes/lorenzo/pci/endpoint: Documentation: PCI: endpoint/pci-endpoint-cfs: Guide to use SR-IOV misc: pci_endpoint_test: Populate sriov_configure ops to configure SR-IOV device PCI: cadence: Add support to configure virtual functions PCI: cadence: Simplify code to get register base address for configuring BAR PCI: endpoint: Add virtual function number in pci_epc ops PCI: endpoint: Add support to link a physical function to a virtual function PCI: endpoint: Add support to add virtual function in endpoint core dt-bindings: PCI: pci-ep: Add binding to specify virtual function
2021-09-02Merge branch 'remotes/lorenzo/pci/xilinx-nwl'Bjorn Helgaas
- Document optional clock DT property (Michal Simek) - Enable PCIe ref clock (Hyun Kwon) * remotes/lorenzo/pci/xilinx-nwl: PCI: xilinx-nwl: Enable the clock through CCF dt-bindings: pci: xilinx-nwl: Document optional clock property
2021-09-02Merge branch 'remotes/lorenzo/pci/mediatek'Bjorn Helgaas
- Split DT bindings for PCIe controllers with independent MSI domains into separate nodes for MT2712/MT7622 (Chuanjia Liu) - Locate shared registers from "mediatek,generic-pciecfg" property (Chuanjia Liu) - Get IRQ from "pcie_irq" if "interrupt-names" property is present to fix an MSI issue (Chuanjia Liu) - Get PCI domain from "linux,pci-domain" property if present (Chuanjia Liu) * remotes/lorenzo/pci/mediatek: PCI: mediatek: Use PCI domain to handle ports detection PCI: mediatek: Add new method to get irq number PCI: mediatek: Add new method to get shared pcie-cfg base address dt-bindings: PCI: mediatek: Update the Device tree bindings
2021-09-02dt-bindings: pwm: rockchip: Add description for rk3568Liang Chen
Add "rockchip,rk3568-pwm", "rockchip,rk3328-pwm" compatible strings for PWM nodes found on a rk3568 platform. Signed-off-by: Liang Chen <cl@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2021-09-02ASoC: dt-bindings: fsl_rpmsg: Add compatible string for i.MX8ULPShengjiu Wang
Add compatible string for i.MX8ULP platform which support audio function through rpmsg audio channel on M core. Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> Link: https://lore.kernel.org/r/1630553525-25655-1-git-send-email-shengjiu.wang@nxp.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-09-01Merge tag 'devicetree-for-5.15' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull devicetree updates from Rob Herring: - Refactor arch kdump DT related code to a common implementation - Add fw_devlink tracking for 'phy-handle', 'leds', 'backlight', 'resets', and 'pwm' properties - Various clean-ups to DT FDT code - Fix a runtime error for !CONFIG_SYSFS - Convert Synopsys DW PCI and derivative binding docs to schemas. Add Toshiba Visconti PCIe binding. - Convert a bunch of memory controller bindings to schemas - Covert eeprom-93xx46, Samsung Exynos TRNG, Samsung Exynos IRQ combiner, arm-charlcd, img-ascii-lcd, UniPhier eFuse, Xilinx Zynq MPSoC FPGA, Xilinx Zynq MPSoC reset, Mediatek mmsys, Gemini boards, brcm,iproc-i2c, faraday,ftpci100, and ks8851 net to DT schema. - Extend nvmem bindings to handle bit offsets in unit-addresses - Add DT schemas for HiKey 970 PCIe PHY - Remove unused ZTE, energymicro,efm32-timer, and Exynos SATA bindings - Enable dtc pci_device_reg warning by default - Fixes for handling 'unevaluatedProperties' in preparation to enable pending support in the tooling for jsonschema 2020-12 draft * tag 'devicetree-for-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (78 commits) dt-bindings: display: remove zte,vou.txt binding doc dt-bindings: hwmon: merge max1619 into trivial devices dt-bindings: mtd-physmap: Add 'arm,vexpress-flash' compatible dt-bindings: PCI: imx6: convert the imx pcie controller to dtschema dt-bindings: Use 'enum' instead of 'oneOf' plus 'const' entries dt-bindings: Add vendor prefix for Topic Embedded Systems of: fdt: Rename reserve_elfcorehdr() to fdt_reserve_elfcorehdr() arm64: kdump: Remove custom linux,usable-memory-range handling arm64: kdump: Remove custom linux,elfcorehdr handling riscv: Remove non-standard linux,elfcorehdr handling of: fdt: Use IS_ENABLED(CONFIG_BLK_DEV_INITRD) instead of #ifdef of: fdt: Add generic support for handling usable memory range property of: fdt: Add generic support for handling elf core headers property crash_dump: Make elfcorehdr address/size symbols always visible dt-bindings: memory: convert Samsung Exynos DMC to dtschema dt-bindings: devfreq: event: convert Samsung Exynos PPMU to dtschema dt-bindings: devfreq: event: convert Samsung Exynos NoCP to dtschema kbuild: Enable dtc 'pci_device_reg' warning by default dt-bindings: soc: remove obsolete zte zx header dt-bindings: clock: remove obsolete zte zx header ...
2021-09-01Merge tag 'dt-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds
Pull ARM SoC DT updates from Arnd Bergmann: "As usual, the bulk of work in the SoC tree goes into DT files, this time with a roughly even split between 32-bit and 64-bit SoCs rather than the usual mostly 64-bit changes. New SoCs: - Microchip SAMA7 SoC family based on Cortex-A7, a new 32-bit platform based on the older SAMA5 series. - Qualcomm Snapdragon SDM636 and SM8150, variations of the existing phone SoCs. - Renesas R-Car H3e-2G and M3e-2G SoCs, variations of older Renesas SoCs. New boards: - Marvell CN913x reference boards - ASpeed AST2600 BMC implementations for Facebook Cloudripper, Elbert and Fuji server boards. - Snapdragon 665 based Sony Xperia 10II - Snapdragon MSM8916 based Xiaomi Redmi 2 - Snapdragon MSM8226 based Samsung Galaxy S3 Neo - NXP i.MX based 32-bit boards: - DHCOM based PicoITX - DHSOM based DRC0ỉ - SolidRun SolidSense - SKOV i.MX6 boards. - NXP i.MX based 64-bit boards: - Nitrogen8 SoM and MNT Reform2 - LS1088A based Traverse Ten64 - i.MX8M based GW7902. - NVIDIA Jetson TX2 NX Developer Kit - 4KOpen STiH418-b2264 development board - ux500 based Samsung phones: Gavini, Codina and Kyle - TI AM335x based Sancloud BBE Lite - ixp4xx dts files to replace all old board files Other changes: - Treewide fixes for dtc warnings - Rockchips i/o domain support - TI OMAP/AM3 CPSW switch driver support - Improved device support for allwinner, aspeed, qualcomm, NXP, nvidia, Renesas, Samsung, Amlogic, Mediatek, ixp4xx, stm32, sti, OMAP and actions" * tag 'dt-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (412 commits) arm/arm64: dts: Fix remaining dtc 'unit_address_format' warnings ARM: dts: rockchip: Add SFC to RV1108 arm64: dts: marvell: armada-37xx: Extend PCIe MEM space ARM: dts: aspeed: p10bmc: Add power control pins ARM: dts: aspeed: cloudripper: Add comments for "mdio1" ARM: dts: aspeed: minipack: Update flash partition table dt-bindings: arm: fsl: Add Traverse Ten64 (LS1088A) board dt-bindings: vendor-prefixes: add Traverse Technologies arm64: dts: add device tree for Traverse Ten64 (LS1088A) arm64: dts: ls1088a: add missing PMU node arm64: dts: ls1088a: add internal PCS for DPMAC1 node ARM: dts: imx6qp-prtwd3: configure ENET_REF clock to 125MHz ARM: dts: vf610-zii-dev-rev-b: Remove #address-cells and #size-cells property from at93c46d dt node ARM: dts: add SKOV imx6q and imx6dl based boards dt-bindings: arm: fsl: add SKOV imx6q and imx6dl based boards dt-bindings: vendor-prefixes: Add an entry for SKOV A/S arm64: dts: imx8mq-reform2: add sound support arm64: dts: imx8m: drop interrupt-affinity for pmu arm64: dts: imx8qxp: update pmu compatible arm64: dts: imx8mm: update pmu compatible ...
2021-09-01Merge branches 'clk-kirkwood', 'clk-imx', 'clk-doc', 'clk-zynq' and ↵Stephen Boyd
'clk-ralink' into clk-next * clk-kirkwood: clk: kirkwood: Fix a clocking boot regression * clk-imx: clk: imx8mn: Add M7 core clock clk: imx8m: fix clock tree update of TF-A managed clocks clk: imx: clk-divider-gate: Switch to clk_divider.determine_rate clk: imx8mn: use correct mux type for clkout path clk: imx8mm: use correct mux type for clkout path * clk-doc: dt-bindings: clock: samsung: fix header path in example MAINTAINERS: clock: include S3C and S5P in Samsung SoC clock entry dt-bindings: clock: samsung: convert S5Pv210 AudSS to dtschema dt-bindings: clock: samsung: convert Exynos AudSS to dtschema dt-bindings: clock: samsung: convert Exynos4 to dtschema dt-bindings: clock: samsung: convert Exynos3250 to dtschema dt-bindings: clock: samsung: convert Exynos542x to dtschema dt-bindings: clock: samsung: add bindings for Exynos external clock dt-bindings: clock: samsung: convert Exynos5250 to dtschema dt-bindings: clock: brcm,iproc-clocks: fix armpll properties clk: zynqmp: Fix kernel-doc format clk: at91: sama7g5: remove all kernel-doc & kernel-doc warnings clk: zynqmp: fix kernel doc * clk-zynq: clk: zynqmp: Fix a memory leak clk: zynqmp: Check the return type * clk-ralink: clk: ralink: avoid to set 'CLK_IS_CRITICAL' flag for gates
2021-09-01Merge branches 'clk-nvidia', 'clk-rockchip', 'clk-at91' and 'clk-vc5' into ↵Stephen Boyd
clk-next - Support the SD/OE pin on IDT VersaClock 5 and 6 clock generators * clk-nvidia: clk: tegra: fix old-style declaration clk: tegra: Remove CLK_IS_CRITICAL flag from fuse clock soc/tegra: fuse: Enable fuse clock on suspend for Tegra124 soc/tegra: fuse: Add runtime PM support soc/tegra: fuse: Clear fuse->clk on driver probe failure soc/tegra: pmc: Prevent racing with cpuilde driver soc/tegra: bpmp: Remove unused including <linux/version.h> * clk-rockchip: clk: rockchip: make rk3308 ddrphy4x clock critical clk: rockchip: drop GRF dependency for rk3328/rk3036 pll types dt-bindings: clk: Convert rockchip,rk3399-cru to DT schema clk: rockchip: Add support for hclk_sfc on rk3036 clk: rockchip: rk3036: fix up the sclk_sfc parent error clk: rockchip: add dt-binding clkid for hclk_sfc on rk3036 * clk-at91: clk: at91: clk-generated: Limit the requested rate to our range * clk-vc5: clk: vc5: Add properties for configuring SD/OE behavior clk: vc5: Use dev_err_probe dt-bindings: clk: vc5: Add properties for configuring the SD/OE pin
2021-09-01Merge tag 'drivers-5.15' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC driver updates from Arnd Bergmann: "These are updates for drivers that are tied to a particular SoC, including the correspondig device tree bindings: - A couple of reset controller changes for unisoc, uniphier, renesas and zte platforms - memory controller driver fixes for omap and tegra - Rockchip io domain driver updates - Lots of updates for qualcomm platforms, mostly touching their firmware and power management drivers - Tegra FUSE and firmware driver updateѕ - Support for virtio transports in the SCMI firmware framework - cleanup of ixp4xx drivers, towards enabling multiplatform support and bringing it up to date with modern platforms - Minor updates for keystone, mediatek, omap, renesas" * tag 'drivers-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (96 commits) reset: simple: remove ZTE details in Kconfig help soc: rockchip: io-domain: Remove unneeded semicolon soc: rockchip: io-domain: add rk3568 support dt-bindings: power: add rk3568-pmu-io-domain support bus: ixp4xx: return on error in ixp4xx_exp_probe() soc: renesas: Prefer memcpy() over strcpy() firmware: tegra: Stop using seq_get_buf() soc/tegra: fuse: Enable fuse clock on suspend for Tegra124 soc/tegra: fuse: Add runtime PM support soc/tegra: fuse: Clear fuse->clk on driver probe failure soc/tegra: pmc: Prevent racing with cpuilde driver soc/tegra: bpmp: Remove unused including <linux/version.h> dt-bindings: soc: ti: pruss: Add dma-coherent property soc: ti: Remove pm_runtime_irq_safe() usage for smartreflex soc: ti: pruss: Enable support for ICSSG subsystems on K3 AM64x SoCs dt-bindings: soc: ti: pruss: Update bindings for K3 AM64x SoCs firmware: arm_scmi: Use WARN_ON() to check configured transports firmware: arm_scmi: Fix boolconv.cocci warnings soc: mediatek: mmsys: Fix missing UFOE component in mt8173 table routing soc: mediatek: mmsys: add MT8365 support ...
2021-09-01Merge branches 'clk-qcom', 'clk-socfpga', 'clk-mediatek', 'clk-lmk' and ↵Stephen Boyd
'clk-x86' into clk-next - Support video, gpu, display clks on qcom sc7280 SoCs - GCC clks on qcom MSM8953, SM4250/6115, and SM6350 SoCs - Multimedia clks (MMCC) on qcom MSM8994/MSM8992 - Migrate to clk_parent_data in gcc-sdm660 - RPMh clks on qcom SM6350 SoCs - Support for Mediatek MT8192 SoCs * clk-qcom: (38 commits) clk: qcom: Add SM6350 GCC driver dt-bindings: clock: Add SM6350 GCC clock bindings clk: qcom: rpmh: Add support for RPMH clocks on SM6350 dt-bindings: clock: Add RPMHCC bindings for SM6350 clk: qcom: adjust selects for SM_VIDEOCC_8150 and SM_VIDEOCC_8250 clk: qcom: Add Global Clock controller (GCC) driver for SM6115 dt-bindings: clk: qcom: gcc-sm6115: Document SM6115 GCC clk: qcom: mmcc-msm8994: Add MSM8992 support clk: qcom: Add msm8994 MMCC driver dt-bindings: clock: Add support for MSM8992/4 MMCC clk: qcom: Add Global Clock Controller driver for MSM8953 dt-bindings: clock: add Qualcomm MSM8953 GCC driver bindings clk: qcom: gcc-sdm660: Replace usage of parent_names clk: qcom: gcc-sdm660: Move parent tables after PLLs clk: qcom: use devm_pm_runtime_enable and devm_pm_clk_create PM: runtime: add devm_pm_clk_create helper PM: runtime: add devm_pm_runtime_enable helper clk: qcom: a53-pll: Add MSM8939 a53pll support dt-bindings: clock: Update qcom,a53pll bindings for MSM8939 support clk: qcom: a53pll/mux: Use unique clock name ... * clk-socfpga: clk: socfpga: agilex: add the bypass register for s2f_usr0 clock clk: socfpga: agilex: fix up s2f_user0_clk representation clk: socfpga: agilex: fix the parents of the psi_ref_clk * clk-mediatek: (22 commits) clk: mediatek: make COMMON_CLK_MT8167* depend on COMMON_CLK_MT8167 clk: mediatek: Add MT8192 vencsys clock support clk: mediatek: Add MT8192 vdecsys clock support clk: mediatek: Add MT8192 scp adsp clock support clk: mediatek: Add MT8192 msdc clock support clk: mediatek: Add MT8192 mmsys clock support clk: mediatek: Add MT8192 mfgcfg clock support clk: mediatek: Add MT8192 mdpsys clock support clk: mediatek: Add MT8192 ipesys clock support clk: mediatek: Add MT8192 imp i2c wrapper clock support clk: mediatek: Add MT8192 imgsys clock support clk: mediatek: Add MT8192 camsys clock support clk: mediatek: Add MT8192 audio clock support clk: mediatek: Add MT8192 basic clocks support clk: mediatek: Add mtk_clk_simple_probe() to simplify clock providers clk: mediatek: Add configurable enable control to mtk_pll_data clk: mediatek: Fix asymmetrical PLL enable and disable control clk: mediatek: Get regmap without syscon compatible check clk: mediatek: Add dt-bindings of MT8192 clocks dt-bindings: ARM: Mediatek: Add audsys document binding for MT8192 ... * clk-lmk: clk: lmk04832: drop redundant fallthrough statements * clk-x86: clk: x86: Rename clk-lpt to more specific clk-lpss-atom
2021-09-01Merge tag 'drm-next-2021-08-31-1' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull drm updates from Dave Airlie: "Highlights: - i915 has seen a lot of refactoring and uAPI cleanups due to a change in the upstream direction going forward This has all been audited with known userspace, but there may be some pitfalls that were missed. - i915 now uses common TTM to enable discrete memory on DG1/2 GPUs - i915 enables Jasper and Elkhart Lake by default and has preliminary XeHP/DG2 support - amdgpu adds support for Cyan Skillfish - lots of implicit fencing rules documented and fixed up in drivers - msm now uses the core scheduler - the irq midlayer has been removed for non-legacy drivers - the sysfb code now works on more than x86. Otherwise the usual smattering of stuff everywhere, panels, bridges, refactorings. Detailed summary: core: - extract i915 eDP backlight into core - DP aux bus support - drm_device.irq_enabled removed - port drivers to native irq interfaces - export gem shadow plane handling for vgem - print proper driver name in framebuffer registration - driver fixes for implicit fencing rules - ARM fixed rate compression modifier added - updated fb damage handling - rmfb ioctl logging/docs - drop drm_gem_object_put_locked - define DRM_FORMAT_MAX_PLANES - add gem fb vmap/vunmap helpers - add lockdep_assert(once) helpers - mark drm irq midlayer as legacy - use offset adjusted bo mapping conversion vgaarb: - cleanups fbdev: - extend efifb handling to all arches - div by 0 fixes for multiple drivers udmabuf: - add hugepage mapping support dma-buf: - non-dynamic exporter fixups - document implicit fencing rules amdgpu: - Initial Cyan Skillfish support - switch virtual DCE over to vkms based atomic - VCN/JPEG power down fixes - NAVI PCIE link handling fixes - AMD HDMI freesync fixes - Yellow Carp + Beige Goby fixes - Clockgating/S0ix/SMU/EEPROM fixes - embed hw fence in job - rework dma-resv handling - ensure eviction to system ram amdkfd: - uapi: SVM address range query added - sysfs leak fix - GPUVM TLB optimizations - vmfault/migration counters i915: - Enable JSL and EHL by default - preliminary XeHP/DG2 support - remove all CNL support (never shipped) - move to TTM for discrete memory support - allow mixed object mmap handling - GEM uAPI spring cleaning - add I915_MMAP_OBJECT_FIXED - reinstate ADL-P mmap ioctls - drop a bunch of unused by userspace features - disable and remove GPU relocations - revert some i915 misfeatures - major refactoring of GuC for Gen11+ - execbuffer object locking separate step - reject caching/set-domain on discrete - Enable pipe DMC loading on XE-LPD and ADL-P - add PSF GV point support - Refactor and fix DDI buffer translations - Clean up FBC CFB allocation code - Finish INTEL_GEN() and friends macro conversions nouveau: - add eDP backlight support - implicit fence fix msm: - a680/7c3 support - drm/scheduler conversion panfrost: - rework GPU reset virtio: - fix fencing for planes ast: - add detect support bochs: - move to tiny GPU driver vc4: - use hotplug irqs - HDMI codec support vmwgfx: - use internal vmware device headers ingenic: - demidlayering irq rcar-du: - shutdown fixes - convert to bridge connector helpers zynqmp-dsub: - misc fixes mgag200: - convert PLL handling to atomic mediatek: - MT8133 AAL support - gem mmap object support - MT8167 support etnaviv: - NXP Layerscape LS1028A SoC support - GEM mmap cleanups tegra: - new user API exynos: - missing unlock fix - build warning fix - use refcount_t" * tag 'drm-next-2021-08-31-1' of git://anongit.freedesktop.org/drm/drm: (1318 commits) drm/amd/display: Move AllowDRAMSelfRefreshOrDRAMClockChangeInVblank to bounding box drm/amd/display: Remove duplicate dml init drm/amd/display: Update bounding box states (v2) drm/amd/display: Update number of DCN3 clock states drm/amdgpu: disable GFX CGCG in aldebaran drm/amdgpu: Clear RAS interrupt status on aldebaran drm/amdgpu: Add support for RAS XGMI err query drm/amdkfd: Account for SH/SE count when setting up cu masks. drm/amdgpu: rename amdgpu_bo_get_preferred_pin_domain drm/amdgpu: drop redundant cancel_delayed_work_sync call drm/amdgpu: add missing cleanups for more ASICs on UVD/VCE suspend drm/amdgpu: add missing cleanups for Polaris12 UVD/VCE on suspend drm/amdkfd: map SVM range with correct access permission drm/amdkfd: check access permisson to restore retry fault drm/amdgpu: Update RAS XGMI Error Query drm/amdgpu: Add driver infrastructure for MCA RAS drm/amd/display: Add Logging for HDMI color depth information drm/amd/amdgpu: consolidate PSP TA init shared buf functions drm/amd/amdgpu: add name field back to ras_common_if drm/amdgpu: Fix build with missing pm_suspend_target_state module export ...
2021-09-01Merge tag 'media/v5.15-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: - new sensor drivers: imx335, imx412, ov9282 - new IR transmitter driver: meson-ir-tx - handro driver gained support for H.264 for Rockchip VDPU2 - imx gained support for i.MX8MQ - ti-vpe has gained support for other SoC variants - lots of cleanups, fixes, board additions and doc improvements * tag 'media/v5.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (195 commits) media: venus: venc: add support for V4L2_CID_MPEG_VIDEO_H264_8X8_TRANSFORM control media: venus: venc: Add support for intra-refresh period media: v4l2-ctrls: Add intra-refresh period control media: docs: ext-ctrls-codec: Document cyclic intra-refresh zero control value media: venus: helper: do not set constrained parameters for UBWC media: venus: venc: Fix potential null pointer dereference on pointer fmt media: venus: hfi: fix return value check in sys_get_prop_image_version() media: tegra-cec: Handle errors of clk_prepare_enable() media: cec-pin: rename timer overrun variables media: TDA1997x: report -ENOLINK after disconnecting HDMI source media: TDA1997x: fix tda1997x_query_dv_timings() return value media: Fix cosmetic error in TDA1997x driver media: v4l2-dv-timings.c: fix wrong condition in two for-loops media: imx: add a driver for i.MX8MQ mipi csi rx phy and controller media: dt-bindings: media: document the nxp,imx8mq-mipi-csi2 receiver phy and controller media: imx: imx7_mipi_csis: convert some switch cases to the default media: imx: imx7-media-csi: Fix buffer return upon stream start failure media: imx: imx7-media-csi: Don't set PIXEL_BIT in CSICR1 media: imx: imx7-media-csi: Set TWO_8BIT_SENSOR for >= 10-bit formats media: dt-bindings: media: nxp,imx7-csi: Add i.MX8MM support ...
generated by cgit (git 2.34.1) at 2025-04-16 18:17:07 +0000