summaryrefslogtreecommitdiff
path: root/Documentation/devicetree/bindings
AgeCommit message (Collapse)Author
2024-03-03dt-bindings: input/touchscreen: Add compatible for IST3038BMarkuss Broks
Imagis IST3038B is a variant (firmware?) of Imagis IST3038 IC differing from IST3038C in its register interface. Add the compatible for it to the IST3038C bindings. Signed-off-by: Markuss Broks <markuss.broks@gmail.com> Acked-by: Conor Dooley <conor.dooley@microchip.com> [balejk@matfyz.cz: elaborate chip differences in the commit message] Signed-off-by: Karel Balej <balejk@matfyz.cz> Link: https://lore.kernel.org/r/20240301164659.13240-3-karelb@gimli.ms.mff.cuni.cz Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2024-01-30dt-bindings: input: document Goodix Berlin Touchscreen ICNeil Armstrong
Document the Goodix GT9916 wich is part of the "Berlin" serie of Touchscreen controllers IC from Goodix. Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20240129-topic-goodix-berlin-upstream-initial-v15-1-6f7d096c0a0a@linaro.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2024-01-23dt-bindings: input: melfas,mms114: add MMS252 compatibleLuca Weiss
Add a compatible for MMS252 touchscreen which appears to work fine with the MMS114 driver. Signed-off-by: Luca Weiss <luca@z3ntu.xyz> Signed-off-by: Bryant Mairs <bryant@mai.rs> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20231105204759.37107-2-bryant@mai.rs Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2024-01-20dt-bindings: input: touchscreen: goodix: clarify irq-gpios misleading textLuca Ceresoli
The irq-gpios description misleading, apparently saying that driving the IRQ GPIO resets the device, which is even more puzzling as there is a reset GPIO as well. In reality the IRQ pin can be driven during the reset sequence to configure the client address, as it becomes clear after checking both the datasheet and the driver code. Improve the text to clarify that. Also rephrase to remove reference to the driver, which is not appropriate in the bindings. Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com> Acked-by: Rob Herring <robh@kernel.org> Reviewed-by: Jeff LaBundy <jeff@labundy.com> Link: https://lore.kernel.org/r/20240102081934.11293-1-luca.ceresoli@bootlin.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2024-01-20dt-bindings: input: silead,gsl1680: do not override firmware-name $refKrzysztof Kozlowski
dtschema package defines firmware-name as string-array, so individual bindings should not make it a string but instead just narrow the number of expected firmware file names. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20240115182057.1610195-1-krzysztof.kozlowski@linaro.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2024-01-09dt-bindings: input: bindings for Adafruit Seesaw GamepadAnshul Dalal
Adds bindings for the Adafruit Seesaw Gamepad. The gamepad functions as an i2c device with the default address of 0x50 and has an IRQ pin that can be enabled in the driver to allow for a rising edge trigger on each button press or joystick movement. Product page: https://www.adafruit.com/product/5743 Arduino driver: https://github.com/adafruit/Adafruit_Seesaw Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Anshul Dalal <anshulusr@gmail.com> Link: https://lore.kernel.org/r/20240106015111.882325-1-anshulusr@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2024-01-01dt-bindings: input: iqs269a: Add bindings for OTP variantsJeff LaBundy
This patch adds bindings for the D0 order code of the device. This order code represents an OTP variant that enables a touch-and-hold function in place of slider 1. Also included is the ability to specify the 00 order code (default option with no OTP customization) explicitly. Signed-off-by: Jeff LaBundy <jeff@labundy.com> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/ZZMaW9RkQ9bKXOUn@nixie71 Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2024-01-01dt-bindings: input: iqs269a: Add bindings for slider gesturesJeff LaBundy
This patch adds bindings for slider gestures that can be expressed by the device. Signed-off-by: Jeff LaBundy <jeff@labundy.com> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/ZZMaPrbSi4IrzwKF@nixie71 Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2023-12-24dt-bindings: touchscreen: neonode,zforce: Use standard propertiesAndreas Kemnade
Enable touchscreen orientation to be specified by using standard properties. Signed-off-by: Andreas Kemnade <andreas@kemnade.info> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20231223221213.774868-3-andreas@kemnade.info Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2023-12-24dt-bindings: touchscreen: convert neonode,zforce to json-schemaAndreas Kemnade
Convert Neonode infrared touchscreen controller binding to DT schema. Signed-off-by: Andreas Kemnade <andreas@kemnade.info> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20231223221213.774868-2-andreas@kemnade.info Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2023-12-22dt-bindings: input: convert drv266x to json-schemaAnshul Dalal
Convert devicetree binding documentation for ti drv2665 and drv2667 haptics driver to json-schema. The previously two separate bindings have been merged into a single drv266x.yaml. Signed-off-by: Anshul Dalal <anshulusr@gmail.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20231221183109.684325-1-anshulusr@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2023-12-12dt-bindings: input: microchip,cap11xx: add advanced sensitivity settingsJiri Valek - 2N
Add support for advanced sensitivity settings and signal guard feature. Signed-off-by: Jiri Valek - 2N <jiriv@axis.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20231121155250.613242-2-jiriv@axis.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2023-12-08dt-bindings: input: gpio-mouse: Convert to json-schemaAnshul Dalal
Convert device tree binding documentation for GPIO attached mouse to json-schema. Signed-off-by: Anshul Dalal <anshulusr@gmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20231208075037.114598-1-anshulusr@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2023-11-30dt-bindings: input: gpio-keys: Allow optional dedicated wakeirqTony Lindgren
Allow configuring an optional dedicated wakeirq for gpio-keys that some SoCs have. Let's use the common interrupt naming "irq" and "wakeup" that we already have in use for some drivers and subsystems like i2c framework. Note that the gpio-keys interrupt property is optional. If only a gpio property is specified, the driver tries to translate the gpio into an interrupt. Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Link: https://lore.kernel.org/r/20231129110618.27551-1-tony@atomide.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2023-11-29dt-bindings: input: mediatek,pmic-keys: Drop incomplete exampleRob Herring
The example for the Mediatek PMIC keys is incomplete as the binding is the full PMIC, not just the sub-functions. It is preferred for MFD examples to be complete in the top-level MFD device binding rather than piecemeal in each sub-function binding. This also fixes an undocumented (by schema) compatible warning for "mediatek,mt6397". Signed-off-by: Rob Herring <robh@kernel.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20231128214816.3975893-1-robh@kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2023-11-29dt-bindings: input: sprd,sc27xx-vibrator: Drop incomplete exampleRob Herring
The example for the Spreadtrum SC27xx PMIC vibrator is incomplete as the binding is the full PMIC, not just the sub-functions. It is preferred for MFD examples to be complete in the top-level MFD device binding rather than piecemeal in each sub-function binding. This also fixes an undocumented (by schema) compatible warning for "sprd,sc2731". Signed-off-by: Rob Herring <robh@kernel.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20231128214809.3975719-1-robh@kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2023-11-15dt-bindings: input: samsung,s6sy761: convert to DT schemaKrzysztof Kozlowski
Convert Samsung S6SY761 touchscreen controller bindings to DT schema. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20231111143221.55452-1-krzysztof.kozlowski@linaro.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2023-10-29dt-bindings: input: fsl,scu-key: Document wakeup-sourceFabio Estevam
The SCU Key controller can be used as a system wakeup source. Document the 'wakeup-source' property. This fixes the following schema warning: system-controller: keys: 'wakeup-source' does not match any of the regexes: 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/firmware/fsl,scu.yaml# Signed-off-by: Fabio Estevam <festevam@denx.de> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20230926122957.341094-1-festevam@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2023-10-27dt-bindings: input: cyttsp5: document vddio-supplyLin, Meng-Bo
The Samsung touchscreen controllers are often used with external pull-up for the interrupt line and the I2C lines, so we might need to enable a regulator to bring the lines into usable state. Otherwise, this might cause spurious interrupts and reading from I2C will fail. Document support for a "vddio-supply" that is enabled by the cyttsp5 driver so that the regulator gets enabled when needed. Signed-off-by: Lin, Meng-Bo <linmengbo0689@protonmail.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Alistair Francis <alistair@alistair23.me> Link: https://lore.kernel.org/r/20221117190507.87535-2-linmengbo0689@protonmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2023-09-05Merge tag 'v6.5' into nextDmitry Torokhov
Sync up with mainline to bring in updates to the shared infrastructure.
2023-08-18Merge tag 'pinctrl-v6.5-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control fixes from Linus Walleij: "Fixes two issues with the Qualcomm SA8775P platform: - Some minor device tree binding flunky that is nice to iron out but more importantly: - Support the increased interrupt targets mask from 3 to 4 bits, making interrupts with higher (hardware) numbers work" * tag 'pinctrl-v6.5-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: qcom: Add intr_target_width field to support increased number of interrupt targets dt-bindings: pinctrl: qcom,sa8775p-tlmm: add gpio function constant
2023-08-12Merge tag 'char-misc-6.5-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char / misc driver fixes from Greg KH: "Here are some small char/misc driver fixes for 6.5-rc6 that resolve some reported issues. Included in here are: - bunch of iio driver fixes for reported problems - interconnect driver fixes - counter driver build fix - cardreader driver fixes - binder driver fixes - other tiny driver fixes All of these have been in linux-next for a while with no reported problems" * tag 'char-misc-6.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (21 commits) misc: tps6594-esm: Disable ESM for rev 1 PMIC misc: rtsx: judge ASPM Mode to set PETXCFG Reg binder: fix memory leak in binder_init() iio: cros_ec: Fix the allocation size for cros_ec_command tools/counter: Makefile: Replace rmdir by rm to avoid make,clean failure iio: imu: lsm6dsx: Fix mount matrix retrieval iio: adc: meson: fix core clock enable/disable moment iio: core: Prevent invalid memory access when there is no parent iio: frequency: admv1013: propagate errors from regulator_get_voltage() counter: Fix menuconfig "Counter support" submenu entries disappearance dt-bindings: iio: adi,ad74115: remove ref from -nanoamp iio: adc: ina2xx: avoid NULL pointer dereference on OF device match iio: light: bu27008: Fix intensity data type iio: light: bu27008: Fix scale format iio: light: bu27034: Fix scale format iio: adc: ad7192: Fix ac excitation feature interconnect: qcom: sa8775p: add enable_mask for bcm nodes interconnect: qcom: sm8550: add enable_mask for bcm nodes interconnect: qcom: sm8450: add enable_mask for bcm nodes interconnect: qcom: Add support for mask-based BCMs ...
2023-08-04Merge tag 'iio-fixes-for-6.5a' of ↵Greg Kroah-Hartman
https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-linus Jonathan writes: 1st set of IIO fixes for 6.5 Usual mixed bag of fixes for recently introduced issues and ones from way back that have recently been noticed. * core - Avoid a device with no parent issues seen on the dummy example device. * adi,ad71145 - Drop ref now that dt-schema supports -nanoamp. * adi,ad7192 - Fix wrong bit set for enabling AC excitation and exposure of control on devices without the feature. * adi,admv1013 - Don't ignore errors from regulator_get_voltage(). * amlogic,meson-adc - Make sure clocks enabled early enough. * google,cros_ec - Fix undersized cros_ec_command allocation that resulted in a buffer overrun. * rohm,bu27008 - Fix truncation issue with scale format that prevents smallest value being set - Report intensity as unsigned. Previously large values would be interpretted as negative intensities (and odd concept). * rohm,bu27034 - Fix truncation issue with scale format that prevents smallest value being set. * st,lsm6dsx - Return an error code, not false (which is 0 and hence success) to indicate ACPI mount matrix retrieval failed due to no ACPI support. * ti,ina2xx - Avoid a NULL pointer dereference if fall back compatible is used. * tag 'iio-fixes-for-6.5a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: iio: cros_ec: Fix the allocation size for cros_ec_command iio: imu: lsm6dsx: Fix mount matrix retrieval iio: adc: meson: fix core clock enable/disable moment iio: core: Prevent invalid memory access when there is no parent iio: frequency: admv1013: propagate errors from regulator_get_voltage() dt-bindings: iio: adi,ad74115: remove ref from -nanoamp iio: adc: ina2xx: avoid NULL pointer dereference on OF device match iio: light: bu27008: Fix intensity data type iio: light: bu27008: Fix scale format iio: light: bu27034: Fix scale format iio: adc: ad7192: Fix ac excitation feature
2023-08-03Merge tag 'net-6.5-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from bpf and wireless. Nothing scary here. Feels like the first wave of regressions from v6.5 is addressed - one outstanding fix still to come in TLS for the sendpage rework. Current release - regressions: - udp: fix __ip_append_data()'s handling of MSG_SPLICE_PAGES - dsa: fix older DSA drivers using phylink Previous releases - regressions: - gro: fix misuse of CB in udp socket lookup - mlx5: unregister devlink params in case interface is down - Revert "wifi: ath11k: Enable threaded NAPI" Previous releases - always broken: - sched: cls_u32: fix match key mis-addressing - sched: bind logic fixes for cls_fw, cls_u32 and cls_route - add bound checks to a number of places which hand-parse netlink - bpf: disable preemption in perf_event_output helpers code - qed: fix scheduling in a tasklet while getting stats - avoid using APIs which are not hardirq-safe in couple of drivers, when we may be in a hard IRQ (netconsole) - wifi: cfg80211: fix return value in scan logic, avoid page allocator warning - wifi: mt76: mt7615: do not advertise 5 GHz on first PHY of MT7615D (DBDC) Misc: - drop handful of inactive maintainers, put some new in place" * tag 'net-6.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (98 commits) MAINTAINERS: update TUN/TAP maintainers test/vsock: remove vsock_perf executable on `make clean` tcp_metrics: fix data-race in tcpm_suck_dst() vs fastopen tcp_metrics: annotate data-races around tm->tcpm_net tcp_metrics: annotate data-races around tm->tcpm_vals[] tcp_metrics: annotate data-races around tm->tcpm_lock tcp_metrics: annotate data-races around tm->tcpm_stamp tcp_metrics: fix addr_same() helper prestera: fix fallback to previous version on same major version udp: Fix __ip_append_data()'s handling of MSG_SPLICE_PAGES net/mlx5e: Set proper IPsec source port in L4 selector net/mlx5: fs_core: Skip the FTs in the same FS_TYPE_PRIO_CHAINS fs_prio net/mlx5: fs_core: Make find_closest_ft more generic wifi: brcmfmac: Fix field-spanning write in brcmf_scan_params_v2_to_v1() vxlan: Fix nexthop hash size ip6mr: Fix skb_under_panic in ip6mr_cache_report() s390/qeth: Don't call dev_close/dev_open (DOWN/UP) net: tap_open(): set sk_uid from current_fsuid() net: tun_chr_open(): set sk_uid from current_fsuid() net: dcb: choose correct policy to parse DCB_ATTR_BCN ...
2023-08-02Merge tag 'soc-fixes-6.5-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Arnd Bergmann: "A couple of platforms get a lone dts fix each: - SoCFPGA: Fix incorrect I2C property for SCL signal - Renesas: Fix interrupt names for MTU3 channels on RZ/G2L and RZ/V2L. - Juno/Vexpress: remove a dangling symlink - at91: sam9x60 SoC detection compatible strings - nspire: Fix arm primecell compatible string On the NXP i.MX platform, there multiple issues that get addressed: - A couple of ARM DTS fixes for i.MX6SLL usbphy and supported CPU frequency of sk-imx53 board - Add missing pull-up for imx8mn-var-som onboard PHY reset pinmux - A couple of imx8mm-venice fixes from Tim Harvey to diable disp_blk_ctrl - A couple of phycore-imx8mm fixes from Yashwanth Varakala to correct VPU label and gpio-line-names - Fix imx8mp-blk-ctrl driver to register HSIO PLL clock as bus_power_dev child, so that runtime PM can translate into the necessary GPC power domain action On the driver side, there are two fixes for tegra memory controller drivers addressing regressions from the merge window, a couple of minor correctness fixes for SCMI and SMCCC firmware, as well as a build fix for an lcd backlight driver" * tag 'soc-fixes-6.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (22 commits) backlight: corgi_lcd: fix missing prototype memory: tegra: make icc_set_bw return zero if BWMGR not supported arm64: dts: renesas: rzg2l: Update overfow/underflow IRQ names for MTU3 channels dt-bindings: serial: atmel,at91-usart: update compatible for sam9x60 ARM: dts: at91: sam9x60: fix the SOC detection ARM: dts: nspire: Fix arm primecell compatible string firmware: arm_scmi: Fix chan_free cleanup on SMC firmware: arm_scmi: Drop OF node reference in the transport channel setup soc: imx: imx8mp-blk-ctrl: register HSIO PLL clock as bus_power_dev child ARM: dts: nxp/imx: limit sk-imx53 supported frequencies firmware: arm_scmi: Fix signed error return values handling firmware: smccc: Fix use of uninitialised results structure arm64: dts: freescale: Fix VPU G2 clock arm64: dts: imx8mn-var-som: add missing pull-up for onboard PHY reset pinmux arm64: dts: phycore-imx8mm: Correction in gpio-line-names arm64: dts: phycore-imx8mm: Label typo-fix of VPU ARM: dts: nxp/imx6sll: fix wrong property name in usbphy node arm64: dts: imx8mm-venice-gw7904: disable disp_blk_ctrl arm64: dts: imx8mm-venice-gw7903: disable disp_blk_ctrl arm64: dts: arm: Remove the dangling vexpress-v2m-rs1.dtsi symlink ...
2023-07-31dt-bindings: net: mediatek,net: fixup MAC bindingRafał Miłecki
1. Use unevaluatedProperties It's needed to allow ethernet-controller.yaml properties work correctly. 2. Drop unneeded phy-handle/phy-mode 3. Don't require phy-handle Some SoCs may use fixed link. For in-kernel MT7621 DTS files this fixes following errors: arch/mips/boot/dts/ralink/mt7621-tplink-hc220-g5-v1.dtb: ethernet@1e100000: mac@0: 'fixed-link' does not match any of the regexes: 'pinctrl-[0-9]+' From schema: Documentation/devicetree/bindings/net/mediatek,net.yaml arch/mips/boot/dts/ralink/mt7621-tplink-hc220-g5-v1.dtb: ethernet@1e100000: mac@0: 'phy-handle' is a required property From schema: Documentation/devicetree/bindings/net/mediatek,net.yaml arch/mips/boot/dts/ralink/mt7621-tplink-hc220-g5-v1.dtb: ethernet@1e100000: mac@1: 'fixed-link' does not match any of the regexes: 'pinctrl-[0-9]+' From schema: Documentation/devicetree/bindings/net/mediatek,net.yaml arch/mips/boot/dts/ralink/mt7621-tplink-hc220-g5-v1.dtb: ethernet@1e100000: mac@1: 'phy-handle' is a required property From schema: Documentation/devicetree/bindings/net/mediatek,net.yaml Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-07-28dt-bindings: net: rockchip-dwmac: fix {tx|rx}-delay defaults/range in schemaEugen Hristev
The range and the defaults are specified in the description instead of being specified in the schema. Fix it by adding the default value in the `default` field and specifying the range as `minimum` and `maximum`. Fixes: b331b8ef86f0 ("dt-bindings: net: convert rockchip-dwmac to json-schema") Signed-off-by: Eugen Hristev <eugen.hristev@collabora.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-07-24dt-bindings: serial: atmel,at91-usart: update compatible for sam9x60Durai Manickam KR
There is only one debug unit in the sam9x60 SOC and it has the chipid register. So, the dbgu compatible strings are valid only for debug usart. Defining these dbgu compatible strings are not valid for flexcom usart. So adding the items which is valid only for flexcom usart and removing the microchip,sam9x60-usart compatible string from the enum list as no usart node defines only this specific compatible string. Signed-off-by: Durai Manickam KR <durai.manickamkr@microchip.com> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20230718065735.10187-2-durai.manickamkr@microchip.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-07-23dt-bindings: pinctrl: qcom,sa8775p-tlmm: add gpio function constantShazad Hussain
Alternative function 'gpio' is not listed in the constants for pin configuration, so adding this constant to the list. Cc: stable@vger.kernel.org Fixes: 9a2aaee23c79 ("dt-bindings: pinctrl: describe sa8775p-tlmm") Signed-off-by: Shazad Hussain <quic_shazhuss@quicinc.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230719110344.19983-1-quic_shazhuss@quicinc.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2023-07-22Merge tag 'devicetree-fixes-for-6.5-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull devicetree fixes from Rob Herring: - Fix moortec,mr75203 schema usage of 'multipleOf' keyword - Fix regression in systems depending on "of-display" device name - Build fix for s390 with CONFIG_PCI=n and OF_EARLY_FLATTREE=y - Drop two obsolete serial .txt bindings * tag 'devicetree-fixes-for-6.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: dt-bindings: serial: Remove obsolete nxp,lpc1850-uart.txt dt-bindings: serial: Remove obsolete cavium-uart.txt dt-bindings: hwmon: moortec,mr75203: fix multipleOf for coefficients of: Preserve "of-display" device name for compatibility of: make OF_EARLY_FLATTREE depend on HAS_IOMEM
2023-07-21dt-bindings: serial: Remove obsolete nxp,lpc1850-uart.txtRob Herring
nxp,lpc1850-uart.txt binding is already covered by 8250.yaml, so remove it. Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20230707221607.1064888-1-robh@kernel.org Signed-off-by: Rob Herring <robh@kernel.org>
2023-07-21dt-bindings: serial: Remove obsolete cavium-uart.txtRob Herring
cavium-uart.txt binding is already covered by 8250.yaml, so remove it. Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20230707221602.1063972-1-robh@kernel.org Signed-off-by: Rob Herring <robh@kernel.org>
2023-07-18dt-bindings: mms114: Add linux,keycodes property for touch keysArtur Weber
MELFAS MMS114 and similar touchscreens have support for touch keys. Add the linux,keycodes property which can be used to set up the keycodes for the touch keys. Acked-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Artur Weber <aweber.kernel@gmail.com> Link: https://lore.kernel.org/r/20230714100424.29798-2-aweber.kernel@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2023-07-17Merge tag 'v6.4' into nextDmitry Torokhov
Sync up with mainline to bring in updates to shared infrastructure.
2023-07-17ASoC: Merge v6.5-rc2Mark Brown
Get a similar baseline to my other branches, and fixes for people using the branch.
2023-07-15dt-bindings: iio: adi,ad74115: remove ref from -nanoampKrzysztof Kozlowski
dtschema v2023.06 comes with support for properties with -nanoamp suffix, thus bindings should not have a ref for it: adi,ad74115.yaml: properties:adi,ext1-burnout-current-nanoamp: '$ref' should not be valid under {'const': '$ref'} Cc: Cosmin Tanislav <demonsingur@gmail.com> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Rob Herring <robh@kernel.org> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20230712080512.94964-1-krzysztof.kozlowski@linaro.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-07-14dt-bindings: hwmon: moortec,mr75203: fix multipleOf for coefficientsKrzysztof Kozlowski
Few coefficients use default values multiple of 100, not 1000 (in the example DTS and in the Linux driver): moortec,mr75203.example.dtb: pvt@e0680000: moortec,ts-coeff-g:0:0: 61400 is not a multiple of 1000 Fixes: bf1fdafdbc61 ("dt-bindings: hwmon: (mr75203) add coefficient properties for the thermal equation") Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230712081124.110345-1-krzysztof.kozlowski@linaro.org Signed-off-by: Rob Herring <robh@kernel.org>
2023-07-12dt-bindings: input: Add bindings for Azoteq IQS7210A/7211A/EJeff LaBundy
Add bindings for the Azoteq IQS7210A/7211A/E family of trackpad/ touchscreen controllers. Signed-off-by: Jeff LaBundy <jeff@labundy.com> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/ZHVEa0yM1LLUJEfO@nixie71 Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2023-07-10dt-bindings: input: iqs7222: Add properties for Azoteq IQS7222DJeff LaBundy
Extend the common binding to include a new variant of the silicon, which effectively replaces a pair of slider nodes with a trackpad node comprising the same or similar properties. As part of this change, the if/then/else schema have been updated to identify properties that are not supported by the new device. Signed-off-by: Jeff LaBundy <jeff@labundy.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/ZKrpOdp+rM8gDekw@nixie71 Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2023-07-10dt-bindings: input: iqs7222: Define units for slider propertiesJeff LaBundy
The units assumed by the 'azoteq,top-speed', 'azoteq,bottom-speed' and 'azoteq,gesture-dist' properties are unspecified; define them according to the device's datasheet. Signed-off-by: Jeff LaBundy <jeff@labundy.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/ZKrpMekZBt95Gmnr@nixie71 Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2023-07-10Merge tag 'linux-watchdog-6.5-rc2' of ↵Linus Torvalds
git://www.linux-watchdog.org/linux-watchdog Pull watchdog update from Wim Van Sebroeck: - Add Loongson-1 watchdog dt-bindings * tag 'linux-watchdog-6.5-rc2' of git://www.linux-watchdog.org/linux-watchdog: dt-bindings: watchdog: Add Loongson-1 watchdog
2023-07-09ASoC: dt-bindings: audio-graph-card2: Drop incomplete exampleRob Herring
The example in audio-graph-card2 binding is incomplete, uses undocumented compatibles strings, and doesn't follow typical .dts formatting. Rather than try to fix with what would probably be a lengthy example, just drop the example. Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20230707221725.1071292-1-robh@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org>
2023-07-09ASoC: dt-bindings: Update maintainer email idRohit kumar
Updated my mail id to latest quicinc id. Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Rohit kumar <quic_rohkumar@quicinc.com> Link: https://lore.kernel.org/r/20230707074337.3120530-1-quic_rohkumar@quicinc.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-07-08Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds
Pull more SCSI updates from James Bottomley: "A few late arriving patches that missed the initial pull request. It's mostly bug fixes (the dt-bindings is a fix for the initial pull)" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: ufs: core: Remove unused function declaration scsi: target: docs: Remove tcm_mod_builder.py scsi: target: iblock: Quiet bool conversion warning with pr_preempt use scsi: dt-bindings: ufs: qcom: Fix ICE phandle scsi: core: Simplify scsi_cdl_check_cmd() scsi: isci: Fix comment typo scsi: smartpqi: Replace one-element arrays with flexible-array members scsi: target: tcmu: Replace strlcpy() with strscpy() scsi: ncr53c8xx: Replace strlcpy() with strscpy() scsi: lpfc: Fix lpfc_name struct packing
2023-07-07dt-bindings: input: touchscreen: edt-ft5x06: Add 'threshold' propertyOleksij Rempel
Add a new property 'threshold' to the edt-ft5x06 touchscreen binding. This property allows setting the "click"-threshold in the range from 0 to 255. This change addresses the following dtbs_check warning: imx6dl-lanmcu.dtb: touchscreen@38: 'threshold' does not match any of the regexes: 'pinctrl-[0-9]+' Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20230621093245.78130-6-o.rempel@pengutronix.de Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2023-07-07dt-bindings: input: exc3000: support power supply regulatorsMike Looijmans
Add power supply regulator support to the exc3000 devices. Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230707131042.10795-1-mike.looijmans@topic.nl Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2023-07-07Merge tag 'riscv-for-linus-6.5-mw2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull more RISC-V updates from Palmer Dabbelt: - A bunch of fixes/cleanups from the first part of the merge window, mostly related to ACPI and vector as those were large - Some documentation improvements, mostly related to the new code - The "riscv,isa" DT key is deprecated - Support for link-time dead code elimination - Support for minor fault registration in userfaultd - A handful of cleanups around CMO alternatives * tag 'riscv-for-linus-6.5-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (23 commits) riscv: mm: mark noncoherent_supported as __ro_after_init riscv: mm: mark CBO relate initialization funcs as __init riscv: errata: thead: only set cbom size & noncoherent during boot riscv: Select HAVE_ARCH_USERFAULTFD_MINOR RISC-V: Document the ISA string parsing rules for ACPI risc-v: Fix order of IPI enablement vs RCU startup mm: riscv: fix an unsafe pte read in huge_pte_alloc() dt-bindings: riscv: deprecate riscv,isa RISC-V: drop error print from riscv_hartid_to_cpuid() riscv: Discard vector state on syscalls riscv: move memblock_allow_resize() after linear mapping is ready riscv: Enable ARCH_SUSPEND_POSSIBLE for s2idle riscv: vdso: include vdso/vsyscall.h for vdso_data selftests: Test RISC-V Vector's first-use handler riscv: vector: clear V-reg in the first-use trap riscv: vector: only enable interrupts in the first-use trap RISC-V: Fix up some vector state related build failures RISC-V: Document that V registers are clobbered on syscalls riscv: disable HAVE_LD_DEAD_CODE_DATA_ELIMINATION for LLD riscv: enable HAVE_LD_DEAD_CODE_DATA_ELIMINATION ...
2023-07-06Merge tag 'dmaengine-6.5-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine Pull dmaengine updates from Vinod Koul: "New support: - TI J721S2 CSI BCDMA support Updates: - Native HDMI support for dw edma driver - ste dma40 updates for supporting proper SRAM handle in DT - removal of dma device chancnt setting in drivers" * tag 'dmaengine-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (28 commits) dmaengine: sprd: Don't set chancnt dmaengine: hidma: Don't set chancnt dmaengine: plx_dma: Don't set chancnt dmaengine: axi-dmac: Don't set chancnt dmaengine: dw-axi-dmac: Don't set chancnt dmaengine: qcom: bam_dma: allow omitting num-{channels,ees} dmaengine: dw-edma: Add HDMA DebugFS support dmaengine: dw-edma: Add support for native HDMA dmaengine: dw-edma: Create a new dw_edma_core_ops structure to abstract controller operation dmaengine: dw-edma: Rename dw_edma_core_ops structure to dw_edma_plat_ops dmaengine: ste_dma40: use proper format string for resource_size_t dmaengine: make QCOM_HIDMA depend on HAS_IOMEM dmaengine: ste_dma40: fix typo in enum documentation dmaengine: ste_dma40: use correct print specfier for resource_size_t MAINTAINERS: Add myself as the DW eDMA driver reviewer MAINTAINERS: Add Manivannan to DW eDMA driver maintainers list MAINTAINERS: Demote Gustavo Pimentel to DW EDMA driver reviewer dmaengine: ti: k3-udma: Add support for J721S2 CSI BCDMA instance dt-bindings: dma: ti: Add J721S2 BCDMA dmaengine: ti: k3-psil-j721s2: Add PSI-L thread map for main CPSW2G ...
2023-07-06Merge tag 'linux-watchdog-6.5-rc1' of ↵Linus Torvalds
git://www.linux-watchdog.org/linux-watchdog Pull watchdog updates from Wim Van Sebroeck: - add Xilinx Versal watchdog - support Hygon FCH/SCH (Server Controller Hub) - convert GPL notices to SPDX identifiers - other improvements * tag 'linux-watchdog-6.5-rc1' of git://www.linux-watchdog.org/linux-watchdog: watchdog: sp5100_tco: support Hygon FCH/SCH (Server Controller Hub) dt-bindings: watchdog: restrict node name suffixes MAINTAINERS: Add support for Xilinx versal watchdog watchdog: xilinx_wwdt: Add Versal window watchdog support dt-bindings: watchdog: xlnx,versal-wwdt: Add versal watchdog watchdog: ziirave_wdt: Switch i2c driver back to use .probe() watchdog: ibmasr: Replace GPL license notice with SPDX identifier watchdog: Convert GPL 2.0 notice to SPDX identifier watchdog: loongson1_wdt: Add DT support
2023-07-06dt-bindings: watchdog: Add Loongson-1 watchdogKeguang Zhang
Add devicetree binding document for Loongson-1 watchdog. Signed-off-by: Keguang Zhang <keguang.zhang@gmail.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lkml.kernel.org/r/20230511121159.463645-2-keguang.zhang@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
generated by cgit (git 2.34.1) at 2025-04-16 16:17:56 +0000