Age | Commit message (Collapse) | Author |
|
Remove compatible for stih415/stih416 and stid127 which are
no more supported.
Signed-off-by: Alain Volmat <avolmat@me.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Link: https://lore.kernel.org/r/20230416195857.61284-1-avolmat@me.com
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Remove bindings for the stih415/stih416/stid127 since they are
not supported within the kernel anymore.
Signed-off-by: Alain Volmat <avolmat@me.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230416190950.18929-1-avolmat@me.com
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Cleanup bindings dropping unneeded quotes. Once all these are fixed,
checking for this can be enabled in yamllint.
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230327170114.4102315-1-robh@kernel.org
|
|
The supplies for PM6150L and PM8150L are the same, so they can be part
of one if-then block, for smaller code.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230418071734.5706-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add documentation to describe StarFive dwmac driver(GMAC).
Signed-off-by: Yanhong Wang <yanhong.wang@starfivetech.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Samin Guo <samin.guo@starfivetech.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
According to:
stmmac_platform.c: stmmac_probe_config_dt
stmmac_main.c: stmmac_dvr_probe
dwmac controller may require one (stmmaceth) or two (stmmaceth+ahb)
reset signals, and the maxItems of resets/reset-names is going to be 2.
The gmac of Starfive Jh7110 SOC must have two resets.
it uses snps,dwmac-5.20 IP.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Samin Guo <samin.guo@starfivetech.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add dwmac-5.20 IP version to snps.dwmac.yaml
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
Signed-off-by: Samin Guo <samin.guo@starfivetech.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
PM8550 is different than PM8550VE/VS, because the latter has much
smaller amount of supplies (l1-3 and s1-6) and regulators. The PM8550
has on the other hand one pin for vdd-l1-l4-l10 supplies. Correct the
if:then: clause with their supplies.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230327080626.24200-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into soc/drivers
Arm SCMI updates for v6.4
The main and only new addition this time around is the support for
unidirectional mailbox channels. SCMI communicates between the agent
and the platform using one bidirectional 'a2p' channel used by the agent
to send SCMI commands and synchronously receive the related replies, and
an optional 'p2a' unidirectional channel used to asynchronously receive
delayed responses and notifications emitted from the platform.
In order to support platforms that support only unidirectional mailbox
hardware channels, the existing bindings are extended to support the
same. Both bidirectional and unidirectional channels support for the
SCMI mailbox can coexist. The correct and effective combination of
defined 'mboxes' and 'shmem' descriptors determines the type of the
mailbox channel.
This also contains a fix for the transfers allocation on Rx channel
especially when the base protocol doesn't use Rx channel while some
of the protocols can have dedicated Rx channels.
* tag 'scmi-updates-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: arm_scmi: Add support for unidirectional mailbox channels
dt-bindings: firmware: arm,scmi: Support mailboxes unidirectional channels
firmware: arm_scmi: Fix xfers allocation on Rx channel
firmware: arm_scmi: Use the bitmap API to allocate bitmaps
firmware: arm_scmi: Fix device node validation for mailbox transport
firmware: arm_scmi: Fix raw coexistence mode behaviour on failure path
firmware: arm_scmi: Remove duplicate include header inclusion
firmware: arm_scmi: Return a literal instead of a variable
firmware: arm_scmi: Clean up a return statement in scmi_probe
Link: https://lore.kernel.org/r/20230417145743.1904318-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl into soc/drivers
Memory controller drivers for v6.4, part two
1. Tegra210 EMC: correct reading of MR18 register.
2. MediaTek SMI: add support for MT8365.
* tag 'memory-controller-drv-6.4-2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl:
memory: mtk-smi: mt8365: Add SMI Support
dt-bindings: memory-controllers: mediatek,smi-larb: add mt8365
dt-bindings: memory-controllers: mediatek,smi-common: add mt8365
memory: tegra: read values from correct device
Link: https://lore.kernel.org/r/20230416143248.308942-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux
Pull more thermal control changes for 6.4-rc1 from Daniel Lezcano:
"- Do preparating cleaning and DT bindings for RK3588 support
(Sebastian Reichel)
- Add driver support for RK3588 (Finley Xiao)
- Use devm_reset_control_array_get_exclusive() for the Rockchip driver
(Ye Xingchen)
- Detect power gated thermal zones and return -EAGAIN when reading the
temperature (Mikko Perttunen)
- Remove thermal_bind_params structure as it is unused (Zhang Rui)
- Drop unneeded quotes in DT bindings allowing to run yamllint (Rob
Herring)
- Update the power allocator documentation according to the thermal
trace relocation (Lukas Bulwahn)
- Fix sensor 1 interrupt status bitmask for the Mediatek LVTS sensor
(Chen-Yu Tsai)
- Use the dev_err_probe() helper in the Amlogic driver (Ye Xingchen)
- Add AP domain support to LVTS thermal controllers for mt8195
(Balsam CHIHI)
- Remove buggy call to thermal_of_zone_unregister() (Daniel Lezcano)
- Make thermal_of_zone_[un]register() private to the thermal OF code
(Daniel Lezcano)
- Create a private copy of the thermal zone device parameters
structure when registering a thermal zone (Daniel Lezcano)"
* tag 'thermal-v6.4-rc1-2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux:
thermal/core: Alloc-copy-free the thermal zone parameters structure
thermal/of: Unexport unused OF functions
thermal/drivers/bcm2835: Remove buggy call to thermal_of_zone_unregister
thermal/drivers/mediatek/lvts_thermal: Add AP domain for mt8195
dt-bindings: thermal: mediatek: Add AP domain to LVTS thermal controllers for mt8195
thermal: amlogic: Use dev_err_probe()
thermal/drivers/mediatek/lvts_thermal: Fix sensor 1 interrupt status bitmask
MAINTAINERS: adjust entry in THERMAL/POWER_ALLOCATOR after header movement
dt-bindings: thermal: Drop unneeded quotes
thermal/core: Remove thermal_bind_params structure
thermal/drivers/tegra-bpmp: Handle offline zones
thermal/drivers/rockchip: use devm_reset_control_array_get_exclusive()
dt-bindings: rockchip-thermal: Support the RK3588 SoC compatible
thermal/drivers/rockchip: Support RK3588 SoC in the thermal driver
thermal/drivers/rockchip: Support dynamic sized sensor array
thermal/drivers/rockchip: Simplify channel id logic
thermal/drivers/rockchip: Use dev_err_probe
thermal/drivers/rockchip: Simplify clock logic
thermal/drivers/rockchip: Simplify getting match data
|
|
LEDs can be in low-active mode, driver already supports it, but
documentation is missing. Add documentation for the dt property.
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Document the compatible for SDHCI on IPQ5018.
Signed-off-by: Sricharan Ramabadhran <quic_srichara@quicinc.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/1681468167-11689-8-git-send-email-quic_srichara@quicinc.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
AMD Pensando Elba ARM 64-bit SoC is integrated with this IP and
explicitly controls byte-lane enables.
Signed-off-by: Brad Larson <blarson@amd.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230410184526.15990-3-blarson@amd.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Add Xilinx Versal Net compatible to support eMMC 5.1 PHY.
Signed-off-by: Sai Krishna Potthuri <sai.krishna.potthuri@amd.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230403102551.3763054-2-sai.krishna.potthuri@amd.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
The Image Sensing Interface (ISI) combines image processing pipelines
with DMA engines to process and capture frames originating from a
variety of sources. The inputs to the ISI go through Pixel Link
interfaces, and their number and nature is SoC-dependent. They cover
both capture interfaces (MIPI CSI-2 RX, HDMI RX) and memory inputs.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Document VSPD found in RZ/V2L SoC. The VSPD block is identical to RZ/G2L
SoC and therefore use RZ/G2L fallback to avoid any driver changes.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Document FCPVD found in RZ/G2L alike SoCs. FCPVD block is similar to
FCP for VSP found on R-Car SoC's . It has 3 clocks compared to 1
clock on fcpv. Introduce new compatibles renesas,r9a07g044-fcpvd
for RZ/G2{L,LC} and renesas,r9a07g054-fcpvd for RZ/V2L to handle this
difference.
The 3 clocks are shared between du, vspd and fcpvd. No driver changes
are required as generic compatible string "renesas,fcpv" will be used
as a fallback.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Document support for the VIN module in the Renesas V4H (r8a779g0) SoC.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Document support for the CSI-2 module in the Renesas V4H (r8a779g0) SoC.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Document support for the ISP module in the Renesas V4H (r8a779g0) SoC.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into soc/drivers
mtk-svs:
smaller coding style changes
mtk-mutex:
- add support for mt8365 display and mt8195 VPP mutex
- add support for more then 32 mods
- use module_platform_driver instead of open coding
mtk-mmsys:
- add support for mt8195 RSZ switching
- add remove function
- use module_platform_driver instead of open coding
- split out mt8173 routing table from the legacy table
- bump up resets in mt8173 to 64
- add support for mt6795 (Helio X10)
- clean-up IS_REACHABLE code for cmdq
* tag 'v6.3-next-soc' of https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux: (25 commits)
soc: mediatek: Kconfig: Add MTK_CMDQ dependency to MTK_MMSYS
soc: mediatek: mutex: Use dev_err_probe()
soc: mediatek: mtk-mmsys: Add support for MT6795 Helio X10
soc: mediatek: mtk-mmsys: Change MT8173 num_resets to 64
soc: mediatek: mtk-mmsys: Split out MT8173 mmsys DDP routing table
soc: mediatek: Cleanup ifdefs for IS_REACHABLE(CONFIG_MTK_CMDQ)
soc: mediatek: cmdq: Add inline functions for !CONFIG_MTK_CMDQ
soc: mediatek: mtk-mutex: Use module_platform_driver() macro
soc: mediatek: mtk-mutex: Replace max handles number with definition
soc: mediatek: mtk-mutex: Compress of_device_id array entries
soc: mediatek: mtk-mmsys: Add MODULE_DEVICE_TABLE() to allow auto-load
soc: mediatek: mtk-mmsys: Compress of_device_id array entries
soc: mediatek: mtk-mmsys: Use module_platform_driver() macro
soc: mediatek: mtk-mmsys: Add .remove() callback
dt-bindings: soc: mediatek: add display mutex for MT8365 SoC
dt-bindings: soc: mediatek: specify which compatible requires clocks property
soc: mediatek: mtk-svs: add thermal voltage compensation if needed
soc: mediatek: mtk-svs: fix passing zero to 'PTR_ERR'
soc: mediatek: mtk-svs: delete node name check
soc: mediatek: mutex: support MT8195 VPPSYS
...
Link: https://lore.kernel.org/r/bc9f7a74-ce12-b323-021c-ff2c0473e979@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt
More Qualcomm ARM64 Devicetree updated for v6.4
Devicetree for the QCM2210/QCM2290 is introduced. Support for the RB1
board is introduced on QRB2210, RB2 on QRB4210, the AL02 board on
IPQ9574, the MI01.6 board is introduced on IPQ5332 and initial support
for Xiaomi Mi A3 is introduced on SM6125.
Support for the output-enable/disable flag is introduced in the
pinctrl-msm driver, and the non-standard "input-enable" is dropped from
a range of platforms.
A wide range of smaller fixes are introduced, based on Devicetree
validation.
MSM8953 gains LPASS, MPSS and Wireless subsystem support.
The iommus property is removed from PCIe nodes in all platforms, as the
only the child devices should be associated with iommu groups, through
the existing iommu-map property.
A few QUP instances are introduced on the IPQ5332 platform, and support
for the MI01.6 board is introduced.
The reserved-memory map on Huawei Nexus 6P is updated with the addition
of splash screen framebuffer memory and adjustment to the reserved
memory region overlapping the smem region.
Regulators are introduces for the SA8775P Ride platform.
A regulator is marked always-on, for correctness, on Trogdor. Pinconf
fixes are introduced to both sc7180 and sc7280 devices. A dedicated
reviewers list is added for boards relevant to the Chromebook engineers.
A set of pinconf fixes are introduced for sc8280xp, labels are
introduced for Soundwire nodes.
The sensor core remoteproc and FastRPC thereon, is introduce in SDM845
and enabled for OnePlus 6/6T and Shift Shift6mq.
RMTFS, remoteprocs, ath10k and ramoops is introduced for the Lenovo Tab
P11.
UFS support is introduced on SM6125.
SM8150 no longer defines the GPU to be in headless mode by default, GPU
speedbins are introduced.
GPU speedbins are introduced for SM8250 as well, as is support for
display on Xiaomi Mi Pad 5 Pro, with two different panels supported.
Soundwire controllers, ADSP audio codec macros and the Inline Crypto
Engine support is added to the SM8550 platform.
* tag 'qcom-arm64-for-6.4-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (85 commits)
arm64: dts: qcom: Add base qrb4210-rb2 board dts
arm64: dts: qcom: sm8550: add Soundwire controllers
arm64: dts: qcom: sm8250: Add GPU speedbin support
arm64: dts: qcom: sm8150: Add GPU speedbin support
arm64: dts: qcom: sm8150: Don't start Adreno in headless mode
arm64: dts: qcom: ipq5332: add support for the RDP468 variant
arm64: dts: qcom: sdm630: move DSI opp-table out of DSI node
arm64: dts: qcom: sm6115p-j606f: Enable ATH10K WiFi
arm64: dts: qcom: sm6115p-j606f: Enable remoteprocs
arm64: dts: qcom: sm6115: Add RMTFS
arm64: dts: qcom: sm6115-j606f: Add ramoops node
arm64: dts: qcom: msm8916-thwc-ufi001c: add function to pin config
arm64: dts: qcom: sm8550: Add the Inline Crypto Engine node
arm64: dts: MSM8953: Add lpass nodes
arm64: dts: MSM8953: Add mpss nodes
arm64: dts: MSM8953: Add wcnss nodes
arm64: dts: qcom: sm8350: remove superfluous "input-enable"
arm64: dts: qcom: sm8150: remove superfluous "input-enable"
arm64: dts: qcom: apq8016: remove superfluous "input-enable"
arm64: dts: qcom: sc8280xp-lenovo-thinkpad: correct pin drive-strength
...
Link: https://lore.kernel.org/r/20230414031550.2412379-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt
A few more Qualcomm ARM32 DeviceTree updates for v6.4
This adds IPA definition to the sdx65 platform, and brings a few
stylistic changes to sdx55 and sdx65.
Compatibles for the two new Qualcomm Robotics Platform boards, RB1 and
RB2, are defined, as is Xiaomi Mi A3 and the MI01.6 development baord on
IPQ5332. These are all ARM64 boards, despite being introduced through
the ARM32 pull request...
* tag 'qcom-dts-for-6.4-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
dt-bindings: arm: qcom: Document the Qualcomm qrb4210-rb2 board
ARM: dts: qcom: sdx55-fn980: Move "status" property to the end of node
ARM: dts: qcom: sdx55: Move reset and wake gpios to board dts
dt-bindings: arm: qcom: document MI01.6 board based on IPQ5332 family
dt-bindings: arm: qcom: Document xiaomi,laurel-sprout board
dt-bindings: arm: qcom: Add QRB2210/QCM2290 and RB1 board
ARM: dts: qcom: sdx65: move status properties to end of nodes
ARM: dts: qcom: sdx65: add IPA information
Link: https://lore.kernel.org/r/20230414023723.2411793-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt
Qualcomm ARM64 updates for v6.4
PCI I/O and MEM ranges are corrected across all targets with PCIe
enabled. Likewise is CPU clocks defined to be provided from CPUfreq for
a wide range of platforms, to satisfy the OPP definitions, and LLCC bank
information is corrected for all relevant platforms.
IPQ5332 gains SMEM, CPUfreq and support for triggering download mode.
The MI01.2 board is introduced.
On MSM8916 WCN compatibles are moved to be defined per board, to avoid
issues when boards rely on the incorrect defaults. Support for Yiming
UZ801 4G modem stick is introduced.
XO clock is defined and fed to RPMCC on MSM8953 and MSM8976, to ensure
clock trees are properly rooted. DSI clocks feeding into gcc are
described on MSM8953.
On MSM8996 the external audio components are moved from the SoC dtsi. A
few DWC3 quirks are added.
On MSM8998 GPIO names are introduced for Sony Xperia XZ Premium, XZ1 and
XZ1 Compact. A numbe of boards have GPIO keys properly marked as
wakeup-source.
The SA8775P platform is extended with CPUfreq, UARTs, I2C controllers,
SPI controllers, SPMI and PMICs, PDC support. The associated PMICs gains
reset and power key support, as well as thermal zones defined. Nodes are
sorted. On top of this the SA8775P Ride board/platform is introduced.
On SC7180 and SC7280 a range of fixes coming from DeviceTree validation are
introduced, some clearing up unused properties, others correcting
errors. A number of Google rev0 boards on SC7180 are dropped, as these
are not considered to be in use by anyone anymore.
On SC8280XP RTC support is introduced and enabled for the CRD and Lenovo
Thinkpad X13s. It gains another UART, upon which Bluetooth is enabled on
the Lenovo ThinkPad X13s. The touchpad definition is altered to attempt
to probe both devices seen in the wild. A number of bug fixes are also
introduced, and the regulator definitions on X13s are corrected.
On SDM845 dynamic power coefficients are improved. BWMON compatible is
corrected. Xiaomi Pocophone F1 gains notification LED. Sony Xperia XZ2,
XZ2 Compact and XZ3 gains display, touchscreen, gpu and remoteproc
support. OnePlus 6 and 6T gains hall sensor.
GPU clock controller and remoteproc nodes are added for SM6115. CPU
clock are defined to come from CPUfreq. Board-specific USB-properties
are moved out of the SoC dtsi.
On SM6375 L3 scaling, IMEM, RMTFS, RPM sleep stats, Tsens, modem
remoteproc and WiFi nodes are added. Tsens thermal zones are defined and additional low power states
are defined. Sony Xperia 10 IV gains volume down key support.
On SM8150 another UART is introduced, to be used by GNSS on the SA8155
ADP. Support for the Flash LED block in PM8150L is added.
On SM8250 TPDM MM and PRNG is defined, MHI region is added to PCIe node.
A few bug fixes are introduced after Devicetree validation.
The DisplayPort controller on both SM8350 and SM8450 is defined and the
related QMP instance is transitioned to the USB3/DP combo variant. IMEM
and PIL info is introduced, for post mortem debugging of remoteprocs. On
the HDK PMIC GLINK is enabled and role switch is enabled. Some audio
resources are corrected.
A typo in the USB role property of the Microsoft Surface is corrected,
thanks to DeviceTree validation.
PCIe controllers and PHYs descriptions are corrected, and pinctrl state
definitions are moved from the soc to the board definition. BWMON
compatibles are corrected. PM8550B gains the definition of the eUSB2
repeater and this is enabled on the MTP. PMIC GLINK is also defined for
the MTP and connected to DWC3, for role switching support.
In addition to this, a range of cleanups based on Devicetree validation
is introduced.
A few clock bindings are introduced, from topic-branches shared with the
clock tree, to aid introduction of references to these.
* tag 'qcom-arm64-for-6.4' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (256 commits)
arm64: dts: qcom: sc8280xp-x13s: Add bluetooth
arm64: dts: qcom: sc8280xp: Define uart2
arm64: dts: qcom: sc8280xp: Add "mhi" region to the PCIe nodes
arm64: dts: qcom: sm8250: Add "mhi" region to the PCIe nodes
arm64: dts: qcom: sdm845: Add "mhi" region to the PCIe nodes
arm64: dts: qcom: sa8775p-ride: set gpio-line-names for PMIC GPIOs
arm64: dts: qcom: sa8775p: add PMIC GPIO controller nodes
arm64: dts: qcom: sa8775p: pmic: add thermal zones
arm64: dts: qcom: sa8775p: pmic: add support for the pmm8654 RESIN input
arm64: dts: qcom: sa8775p: pmic: add the power key
arm64: dts: qcom: sa8775p: add the Power On device node
arm64: dts: qcom: sa8775p: add support for the on-board PMICs
arm64: dts: qcom: sa8775p: add the spmi node
arm64: dts: qcom: sa8775p: add the pdc node
arm64: dts: qcom: sa8775p: sort soc nodes by reg property
arm64: dts: qcom: sa8775p: pad reg properties to 8 digits
arm64: dts: qcom: sc8280xp: correct Soundwire wakeup interrupt name
arm64: dts: qcom: sdm845-tama: Enable GPI_DMA0/1
arm64: dts: qcom: sdm845-tama: Enable GPU
arm64: dts: qcom: sdm845-tama: Enable remoteprocs
...
Link: https://lore.kernel.org/r/20230410170233.5931-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt
Qualcomm ARM32 DeviceTree updates for v6.4
stdout-path is defined for the ALFA Network AP120C-AC, to avoid the need
to pass this information on the kernel commandline. Ath10k is wired up
to read calibration data from the "ART" partition.
PCI I/O port ranges are fixed on IPQ4019 and IPQ8064.
Supply clocks are defined for KPSS L2CC and ACC clock controllers.
Supply clocks for the global clock controller are being specified on
IPQ4019, MSM8974 and MSM8226.
PCIe RC support is enabled on the SDX55 T55 development board, IPA is
defined for the SDX55 and a number of cleanup patches are introduced.
Compatibles for QRB2210/QCM2290, IPQ9574, QRD8550 and IPQ5332 platforms
are added, and the RB1, Yiming LTE dongle, Xiaomi Mi A3, MI01.2 and
MI01.6 boards.
* tag 'qcom-dts-for-6.4' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (28 commits)
dt-bindings: arm: qcom: Add Yiming LTE dongle uz801-v3.0 (yiming-uz801v3)
dt-bindings: vendor-prefixes: Add Henan Yiming Technology Co., Ltd.
ARM: dts: qcom: sdx55: add dedicated SDX55 TCSR compatible
ARM: dts: qcom: sdx55-t55: Move "status" property down
ARM: dts: qcom: sdx55-t55: Enable PCIe RC support
ARM: dts: qcom: sdx55: List the property values vertically
ARM: dts: qcom: sdx55: Add support for PCIe RC controller
ARM: dts: qcom: sdx55: Rename pcie0_{phy/lane} to pcie_{phy/lane}
ARM: dts: qcom: sdx55: Fix the unit address of PCIe EP node
ARM: dts: qcom: ipq8064: Fix the PCI I/O port range
ARM: dts: qcom: ipq4019: Fix the PCI I/O port range
ARM: dts: qcom: apq8064: Use 0x prefix for the PCI I/O and MEM ranges
dt-bindings: arm: qcom: Add ipq9574 compatible
ARM: dts: qcom: msm8974: add correct XO clock source to GCC node
ARM: dts: qcom: msm8226: add clocks and clock-names to GCC node
ARM: dts: qcom: rename kpss-acc-v2 nodes to power-manager nodes
ARM: dts: qcom: add missing clock configuration for kpss-acc-v1
ARM: dts: qcom: add and fix clock configuration for kpss-gcc nodes
ARM: dts: qcom: add per SoC compatible for qcom,kpss-gcc nodes
dt-bindings: qcom: add ipq5332 boards
...
Link: https://lore.kernel.org/r/20230410155226.5127-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into soc/dt
TI K3 device tree updates for v6.4
New features:
* Overlays for CPSW9G and CPSW5G on J721e-evm, J7200-evm
* Add support for AM625 based BeaglePlay, AM62-LP-SK
* Audio, RTC, watchdog support for AM625
* McSPI for J7200,j721e, j721s2, J784s4
* ADC for j721s2
* Crypto acceleration, CPSW2G for J784s4
Non critical fixes:
AM62, AM62a:
* Fix schematics error to increase DDR to 4GB on AM62a-SK
* L2Cache size fix (AM62a/AM625)
* ti,vbus-divider property to USB1 on AM625-SK
* Gpio count fix for AM625
J7200,j721e, j721s2, J784s4, AM68, AM69:
* ti,sci-dev-id for J784s4 NAVSS nodes
* j721e-sk: Drop application specific firmware name
* am68-sk: Fix the gpio expander lines for production version
Cleanups:
* Pinmux header move to dt folder (next kernel PR, we will drop the uapi header).
* j721e: ti,strobe-sel property cleanup for descoped HS400 MMC operation
* tag 'ti-k3-dt-for-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/ti/linux: (34 commits)
arm64: dts: ti: k3-j784s4-evm: Add eMMC mmc0 support
arm64: dts: ti: Enable audio on SK-AM62(-LP)
arm64: dts: ti: k3-am62-main: Add McASP nodes
arm64: dts: ti: k3-j784s4: Add MCSPI nodes
arm64: dts: ti: k3-j721s2: Add MCSPI nodes
arm64: dts: ti: k3-j7200: Add MCSPI nodes
arm64: dts: ti: k3-j721e: Add MCSPI nodes
arm64: ti: dts: Add support for AM62x LP SK
arm64: dts: ti: Refractor AM625 SK dts
dt-bindings: arm: ti: k3: Add compatible for AM62x LP SK
arm64: dts: ti: k3-am625-sk: Add ti,vbus-divider property to usbss1
arm64: dts: ti: k3-am68-sk-base-board: Update IO EXP GPIO lines for Rev E2
arm64: dts: ti: Add k3-am625-beagleplay
dt-bindings: arm: ti: Add BeaglePlay
arm64: dts: ti: k3-j7200: Add overlay to enable CPSW5G ports in QSGMII mode
arm64: dts: ti: j7200-main: Add CPSW5G nodes
arm64: dts: ti: k3-j721e: Add overlay to enable CPSW9G ports in QSGMII mode
arm64: dts: ti: k3-j721e: Add CPSW9G nodes
arm64: dts: ti: k3-j784s4-evm: Enable MCU CPSW2G
arm64: dts: ti: k3-j721s2-common-proc-board: Add pinmux information for ADC
...
Link: https://lore.kernel.org/r/20230410140521.3u3fftgnejakqnzj@shakable
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt
New boards: OrangePi R1 Plus, NanoPi R2C + R5C + R5S, Khadas Edge2.
General RK3588 additions: audio, thermal management, sdmmc, clock fixes,
watchdog; RK3588-Rock5b: rtc, pwm, audio.
Display support for Odroid Go Super and PinephonePro.
And some misc adaptions for recently merged yaml binding conversions.
* tag 'v6.4-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (35 commits)
arm64: dts: rockchip: correct panel supplies on Odroid Go Super
arm64: dts: rockchip: Add rk3588-rock-5b analog audio
arm64: dts: rockchip: Add I2S rk3588 nodes
arm64: dts: rockchip: Add rk3588s I2S nodes
arm64: dts: rockchip: Assign PLL_PPLL clock rate to 1.1 GHz on rk3588s
arm64: dts: rockchip: Fix SCMI assigned clocks on rk3588s
arm64: dts: rockchip: add rk3588 thermal sensor
arm64: dts: rockchip: Add pwm-fan to rk3588-rock-5b
arm64: dts: rockchip: Enable RTC support for Rock 5B
arm64: dts: rockchip: Add Xunlong OrangePi R1 Plus LTS
dt-bindings: Add doc for Xunlong OrangePi R1 Plus LTS
arm64: dts: rockchip: Add FriendlyARM NanoPi R2C
dt-bindings: Add doc for FriendlyARM NanoPi R2C
arm64: dts: rockchip: Add touchscreen support to rk3399-pinephone-pro
arm64: dts: rockchip: Add internal display support to rk3399-pinephone-pro
dt-bindings: watchdog: rockchip: Add rockchip,rk3588-wdt string
arm64: dts: rockchip: Enable watchdog support for RK3588
arm64: dts: rockchip: remove hclk from dsi node on rk356x
arm64: dts: rockchip: rename vbus-supply to phy-supply in rk3566-box-demo.dts
arm64: dts: rockchip: fix rk3399 dp node
...
Link: https://lore.kernel.org/r/7289562.MhkbZ0Pkbq@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into soc/dt
- added D1 crypto node
- enabled DVFS on OrangePi PC2 board
- added GPIO line names on Nezha D1 board
- added suniv USB nodes and enabled on licheepi-nano
- new suniv boards: PopStick v1.1 and Lctech Pi
- added Allwinner T113-s DTSI
- added MangoPi MQ-R T113-s board variant
- swapped DMA names for A23, A31, A33, D1, H3, H5, V3s
* tag 'sunxi-dt-for-6.4-1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
riscv: dts: allwinner: d1: Switch dma-names order for snps,dw-apb-uart nodes
ARM: dts: sunxi: h3/h5: Switch dma-names order for snps,dw-apb-uart nodes
ARM: dts: sun8i: v3s: Switch dma-names order for snps,dw-apb-uart nodes
ARM: dts: sun8i: a23/a33: Switch dma-names order for snps,dw-apb-uart nodes
ARM: dts: sun6i: a31: Switch dma-names order for snps,dw-apb-uart nodes
ARM: dts: sunxi: add MangoPi MQ-R-T113 board
dt-bindings: arm: sunxi: document MangoPi MQ-R board names
ARM: dts: sunxi: add Allwinner T113-s SoC .dtsi
dts: add riscv include prefix link
ARM: dts: suniv: Add Lctech Pi F1C200s devicetree
ARM: dts: suniv: add device tree for PopStick v1.1
dt-binding: arm: sunxi: add two board compatible strings
dt-bindings: vendor-prefixes: add Source Parts and Lctech names
ARM: dts: suniv: licheepi-nano: enable USB
ARM: dts: suniv: add USB-related device nodes
riscv: dts: nezha-d1: add gpio-line-names
arm64: dts: allwinner: h5: OrangePi PC2: add OPP table to enable DVFS
riscv: dts: allwinner: d1: Add crypto engine node
Link: https://lore.kernel.org/r/20230408125156.GA17050@jernej-laptop
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt
i.MX dt-bindings update for 6.4:
- Add vendor prefix for chargebyte.
- A bunch of new board compatibles: Tolino Vision, Toradex Apalis,
chargebyte Tarragon, i.MX8M Plus based boards from DH electronics
and Data Modul, etc.
- A series from Marek Vasut to improve blk-ctrl bindings.
* tag 'imx-bindings-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
dt-bindings: arm: Add Data Modul i.MX8M Plus eDM SBC
dt-bindings: arm: fsl: Add chargebyte Tarragon
dt-bindings: vendor-prefixes: add chargebyte
dt-bindings: soc: imx-blk-ctrl: Drop leading label in blk-ctrl in examples
dt-bindings: soc: imx8m-blk-ctrl: Rename blk_ctrl to blk-ctrl in examples
dt-bindings: arm: Add DH electronics i.MX8M Plus DHCOM on PDK3
dt-bindings: arm: fsl: add compatible string for Tolino Vision
dt-bindings: arm: fsl: Add Y Soft IOTA Phoenix, Lynx, Pegasus and Pegasus+
dt-bindings: arm: fsl: Add colibri-imx8x carrier boards
dt-bindings: soc: imx8mp-media-blk-ctrl: Add LDB subnode into schema and example
dt-bindings: soc: imx8mp-media-blk-ctrl: Align block controller example name
dt-bindings: arm: fsl: Fix copy-paste error in comment
dt-bindings: arm: fsl: add toradex,apalis-imx8 et al.
|
|
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into soc/dt
RISC-V Devicetrees for v6.4
Microchip:
A "fix" for the system controller's regs on PolarFire SoC, adding a
missing reg property.
The patch had been sitting there for months and I only re-found it
recently, so you can guess how much of a "fix" it actually is. It'll
become needed when the system controller's QSPI gets added in the future,
but at present there's no urgency as the driver can handle both the
current and "fixed" versions.
StarFive:
Basic support for the JH7110 & the associated first-party dev board, the
VisionFive v2 (in two forms). There's a bunch of dt-bindings required
for this too, all of which have had input from the DT folk. There's
enough in this tag to boot to a console w/ an initramfs but little more.
The SoC supports some of the "new" bit manipulation instructions, which
is a good test for the recently added Zbb support in the kernel.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
* tag 'riscv-dt-for-v6.4' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux:
riscv: dts: starfive: Add StarFive JH7110 VisionFive 2 board device tree
riscv: dts: starfive: Add StarFive JH7110 pin function definitions
riscv: dts: starfive: Add initial StarFive JH7110 device tree
dt-bindings: riscv: Add SiFive S7 compatible
dt-bindings: interrupt-controller: Add StarFive JH7110 plic
dt-bindings: timer: Add StarFive JH7110 clint
dt-bindings: clock: Add StarFive JH7110 always-on clock and reset generator
dt-bindings: clock: Add StarFive JH7110 system clock and reset generator
riscv: dts: microchip: fix the mpfs' mailbox regs
riscv: dts: microchip: add mpfs specific macb reset support
Link: https://lore.kernel.org/r/20230406-shank-impromptu-3d483bbc249f@spud
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/dt
arm64: tegra: Device tree changes for v6.4-rc1
This adds support for the Jetson Orin NX and includes updates for Jetson
AGX Orin (audio codec, USB Type-C support).
* tag 'tegra-for-6.4-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
arm64: tegra: Add vccmq on Jetson TX2
arm64: tegra: Populate USB Type-C Controller for Jetson AGX Orin
arm64: tegra: Audio codec support on Jetson AGX Orin
arm64: tegra: Support Jetson Orin NX reference platform
arm64: tegra: Support Jetson Orin NX
dt-bindings: tegra: Document Jetson Orin NX reference platform
dt-bindings: tegra: Document Jetson Orin NX
arm64: tegra: Add DSU PMUs for Tegra234
arm64: tegra: Drop serial clock-names and reset-names
Link: https://lore.kernel.org/r/20230406124804.970394-6-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/dt
dt-bindings: Changes for v6.4-rc1
This is a single patch that drops unneeded quotes from various Tegra-
related device tree bindings.
* tag 'tegra-for-6.4-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
dt-bindings: arm: nvidia: Drop unneeded quotes
Link: https://lore.kernel.org/r/20230406124804.970394-4-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Apple SoC DT updates for 6.4.
This time we have the M2 (t8112) device trees and compatible updates,
as well as a minor fix for PCIe ports on the prior models.
* tag 'asahi-soc-dt-6.4' of https://github.com/AsahiLinux/linux:
arm64: dts: apple: t600x: Disable unused PCIe ports
arm64: dts: apple: t8103: Disable unused PCIe ports
arm64: dts: apple: t8112: Initial t8112 (M2) device trees
dt-bindings: arm: apple: Add t8112 j413/j473/j493 compatibles
dt-bindings: clock: apple,nco: Add t8112-nco compatible
dt-bindings: i2c: apple,i2c: Add apple,t8112-i2c compatible
dt-bindings: pinctrl: apple,pinctrl: Add apple,t8112-pinctrl compatible
dt-bindings: pci: apple,pcie: Add t8112 support
dt-bindings: nvme: apple: Add apple,t8112-nvme-ans2 compatible string
dt-bindings: mailbox: apple,mailbox: Add t8112 compatibles
dt-bindings: iommu: apple,sart: Add apple,t8112-sart compatible string
dt-bindings: interrupt-controller: apple,aic2: Add apple,t8112-aic compatible
dt-bindings: arm: cpus: Add apple,avalanche & blizzard compatibles
dt-bindings: watchdog: apple,wdt: Add t8112-wdt compatible
dt-bindings: arm: apple: apple,pmgr: Add t8112-pmgr compatible
dt-bindings: power: apple,pmgr-pwrstate: Add t8112 compatible
Link: https://lore.kernel.org/r/7263df01-aebc-2db5-f074-4805e0ae9fbc@marcan.st
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/dt
Samsung DTS ARM changes for v6.4
1. Several cleanups and improvements as a result of dtbs_checks: align
node names with bindings, drop incorrect properties, fix clock-names,
add missing "ports" node.
2. Move DP and MIPI phys to PMU node (DTS with binding change).
3. Drop old MSHC aliases (while adding proper mmc-ddr-1_8v which was
selected by the driver based on the MSHC alias) and add generic MMC
aliases in each board. The aliases match known numbering in
the schematics.
* tag 'samsung-dt-6.4' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
dt-bindings: soc: samsung: exynos-pmu: allow phys as child on Exynos3 and Exynos4
ARM: dts: exynos: add mmc aliases
ARM: dts: exynos: replace mshc0 alias with mmc-ddr-1_8v property
ARM: dts: exynos: fix MCT compatible in Universal C210
ARM: dts: exynos: move DP and MIPI phys to PMU node in Exynos5250
ARM: dts: exynos: move DP and MIPI phys to PMU node in Exynos5420
ARM: dts: exynos: move MIPI phy to PMU node in Exynos4
ARM: dts: exynos: move MIPI phy to PMU node in Exynos3250
ARM: dts: exynos: drop unused samsung,camclk-out property in Midas
ARM: dts: s5pv210: correct MIPI CSIS clock name
ARM: dts: exynos: correct whitespace in Midas
ARM: dts: exynos: fix WM8960 clock name in Itop Elite
ARM: dts: exynos: add ports to TC358764 bridge on Arndale
ARM: dts: exynos: drop fake align STMPE properties in P4 Note
ARM: dts: exynos: align STMPE ADC node name with bindings in P4 Note
Link: https://lore.kernel.org/r/20230405080438.156805-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/dt
Samsung DTS ARM64 changes for v6.4
1. Exynos850: add headers with AUD, G3D and HSI clock controller clock
IDs. Add G3D (GPU) clock controller node.
2. Exynos5433: fixes for dtbs_check: move MIPI phy to PMU node.
3. Drop old MSHC aliases (while adding proper mmc-ddr-1_8v which was
selected by the driver based on the MSHC alias) and add generic MMC
aliases in each board. The aliases match known numbering in
the schematics.
* tag 'samsung-dt64-6.4' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
arm64: dts: exynos: add mmc aliases
arm64: dts: exynos: drop mshc aliases
arm64: dts: exynos: Add CMU_G3D node for Exynos850 SoC
arm64: dts: exynos: move MIPI phy to PMU node in Exynos5433
dt-bindings: clock: exynos850: Add AUD and HSI main gate clocks
dt-bindings: clock: exynos850: Add Exynos850 CMU_G3D
Link: https://lore.kernel.org/r/20230405080438.156805-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers
A few more Qualcomm driver updates for v6.4
This introduces a new binding and a dedicated driver for the Qualcomm
Inline-Crypto-Engine (ICE), in order to support a single shared instance
between SDHCI and UFS, found in recent platforms.
RSC version check is updated to support minor revisions of v3 of the ip
block, the SMD-RPM interface is transitioned to GFP_ATOMIC to avoid the
shrinker to kick in underneath the GPU and QCM2290 support is added to
the SCM binding.
* tag 'qcom-drivers-for-6.4-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
dt-bindings: crypto: Add Qualcomm Inline Crypto Engine
soc: qcom: Make the Qualcomm UFS/SDCC ICE a dedicated driver
dt-bindings: firmware: document Qualcomm QCM2290 SCM
soc: qcom: rpmh-rsc: Support RSC v3 minor versions
soc: qcom: smd-rpm: Use GFP_ATOMIC in write path
Link: https://lore.kernel.org/r/20230414024302.2411985-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers
Qualcomm driver updates for v6.4
The Qualcomm SCM driver will now always clear the download bit, avoiding
entering download mode on a clean reboot because the bootloader left it
set. The vmid bitmap passed to qcom_scm_assign_mem() is transitioned to
a well defined size. SM6375 support is added, and SC8180X,
QDU1000/QRU1000, IPQ5332 and IPQ9574 compatibles are documented.
GENI gains support for newer hardware with deeper FIFOs.
The BWMON driver is updated to better handle the two register blocks,
which are not consistent between MSM8998 and newer platforms.
The LLCC driver no longer assumes a fixes stride across the various
banks, and instead acquire the bank placement from DeviceTree. EDAC
support for polling is introduced. EDAC support on SDM845 is disabled,
as its been observed that accessing relevant registers is not permitted
on most devices.
PMIC GLINK is reworked to support defining which auxiliary children to
spawn per platform, support for spawning a UCSI child is added and
SM8450 and SM8550 is introduced.
The RPM power-domain driver is cleaned up by moving and generalizing
structures that are common between platforms, rather than duplicating
everything. Macros are replaced with just direct definition of the
relevant structures. Support for defining parent relationships between
the power-domains is introduced, like it has been in rpmhpd for a long
time.
Number of processors has gone up, so max processor count in SMEM
is bumped again. Error handling in SMSM is cleaned up using
dev_err_probe().
Socinfo is taught about IPQ9574, QCM2290, QRB2210, QRB4210, SM7150,
SA8775P and a number of PMICs.
* tag 'qcom-drivers-for-6.4' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (51 commits)
dt-bindings: firmware: document Qualcomm SC8180X SCM
dt-bindings: sram: qcom,imem: document SM6375 IMEM
soc: qcom: icc-bwmon: Handle global registers correctly
soc: qcom: icc-bwmon: Remove unused struct member
soc: qcom: smsm: Use dev_err_probe()
firmware: qcom_scm: Add SM6375 compatible
soc: qcom: llcc: Add configuration data for SM7150
dt-bindings: arm: msm: Add LLCC for SM7150
dt-bindings: soc: qcom: smd-rpm: re-add missing qcom,rpm-msm8994
soc: qcom: pmic_glink: register ucsi aux device
dt-bindings: soc: qcom: qcom,pmic-glink: document SM8550 compatible
dt-bindings: soc: qcom: qcom,pmic-glink: document SM8450 compatible
firmware: qcom_scm: Clear download bit during reboot
dt-bindings: soc: qcom: aoss: Document QDU1000/QRU1000 compatible
dt-bindings: firmware: qcom,scm: Update QDU1000/QRU1000 compatible
dt-bindings: soc: qcom: smd-rpm: Add IPQ9574 compatible
firmware: qcom_scm: Use fixed width src vm bitmap
dt-bindings: firmware: qcom,scm: document IPQ5332 SCM
dt-bindings: scm: Add compatible for IPQ9574
soc: qcom: rpmpd: Remove useless comments
...
Link: https://lore.kernel.org/r/20230410152421.4477-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Conflicts:
tools/testing/selftests/net/config
62199e3f1658 ("selftests: net: Add VXLAN MDB test")
3a0385be133e ("selftests: add the missing CONFIG_IP_SCTP in net config")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree fixes from Rob Herring:
- Fix interaction between fw_devlink and DT overlays causing devices to
not be probed
- Fix the compatible string for loongson,cpu-interrupt-controller
* tag 'devicetree-fixes-for-6.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
treewide: Fix probing of devices in DT overlays
dt-bindings: interrupt-controller: loongarch: Fix mismatched compatible
|
|
The sc8280xp has a new version of the ETHQOS hardware in it, EMAC v3.
Add a compatible for this.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Tested-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Convert Qualcomm ETHQOS Ethernet devicetree binding to YAML.
In doing so add a new property for iommus since newer platforms support
using one, and without such make dtbs_check fails on them.
While at it, also update the MAINTAINERS file to point to the yaml
version of the bindings.
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
[halaney: Remove duplicated properties, add MAINTAINERS and iommus]
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Tested-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add Qualcomm Ethernet ETHQOS compatible checks
in snps,dwmac YAML binding document.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Tested-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
As commit fc191af1bb0d ("net: stmmac: platform: Fix misleading
interrupt error msg") noted, not every stmmac based platform
makes use of the 'eth_wake_irq' or 'eth_lpi' interrupts.
So, update the 'interrupt-names' inside 'snps,dwmac' YAML
bindings to reflect the same.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Tested-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Convert the Qualcomm IOMMU bindings to YAML.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230406-topic-qciommu-v3-1-aa0e4f018191@linaro.org
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for v6.4-rc1:
Cross-subsystem Changes:
- Convert MIPI DSIM bridge dt to yaml.
Core Changes:
- Fix UAF race in drm scheduler.
Driver Changes:
- Add primary plane positioning support to VKMS.
- Convert omapdrm fbdev emulation to in-kernel client.
- Assorted small fixes to vkms, vc4, nouveau, vmwgfx.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/b7c37d4e-8f16-85dc-0f5f-3bd98f961395@linux.intel.com
|
|
Document that the da9063 only provides under- *and* over-voltage
monitoring in one, and therefore requires both to be configured with the
same severity and value. Add an example for clarification.
Signed-off-by: Benjamin Bara <benjamin.bara@skidata.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Adam Ward <DLG-Adam.Ward.opensource@dm.renesas.com>
Link: https://lore.kernel.org/r/20230403-da9063-disable-unused-v3-3-cc4dc698864c@skidata.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The GPIO IR receiver can be used as a wake-up source for the system,
document that.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Add DT compatible for Data Modul i.MX8M Plus eDM SBC board.
This is an evaluation board for various custom display units.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|