| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/joel/fsi into char-misc-next
Joel writes:
"FSI changes for v6.1
* Fix a OCC hwmon userspace compatibility regression that was
introduced in v5.19
* Device tree bindings for the OCC
* A bunch of janitor type fixes"
* tag 'fsi-for-v6.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/fsi:
fsi: core: Check error number after calling ida_simple_get
hwmon: (occ) Check for device property for setting OCC active during probe
fsi: occ: Support probing the hwmon child device from dts node
dt-bindings: hwmon: Add IBM OCC bindings
fsi: master-ast-cf: Fix missing of_node_put in fsi_master_acf_probe
fsi: sbefifo: Add detailed debugging information
fsi: cleanup extern usage in function definition
fsi: occ: Prevent use after free
hwmon (occ): Retry for checksum failure
fsi: occ: Fix checksum failure mode
fsi: Fix typo in comment
|
|
These bindings describe the POWER processor On Chip Controller accessed
from a service processor or baseboard management controller (BMC).
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Link: https://lore.kernel.org/r/20220809200701.218059-2-eajames@linux.ibm.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next
Jonathan writes:
Second set of IIO new device support, features and cleanup for the 6.1 cycle.
Normal mixed bag of new device support with continuing trend that most new
devices are supported by extending existing drivers - a positive sign perhaps
that device manufacturers have somewhat stabilized their interfaces across
product generations. The BNO055 driver was however a substantial addition
including several additions to the IIO core.
There are a number of significant patch sets under review, so if the 6.0
cycle runs long I may send a 3rd pull request.
New device support
* adi,adxl313
- Support for the ADXL312 and ADXL314 accelerometers.
* bosch,bmp280
- Support for the BMP380 family of pressures sensors.
Included considerable refactoring and modernization of the bmp280
driver.
* bosch,bno055
- New driver for this i2c/serial attached complex IMU.
* lltc,ltc2497
- Support for the LTC2499 16 channel, 24bit ADC.
* st,pressure
- Support for the LPS22DF pressure sensor
* st,lsm6dsx
- Support for the LSM6DSTX (Mainly adding the ID and WAI)
Features
* core - to support the bosch,bno055 requirements
- Support for linear acceleration channel type (effect of gravity removed)
- Pitch, yaw and roll modifiers for angle channels.
- Standard serialnumber attribute documentation.
- Binary attributes - to allow for calibration save and restore.
* adi,ad7923
- Support extended range (wider supported input voltage range).
* bosch,bmp280
- Add filter controls for some supported parts.
* microchip,mcp3911
- Buffered capture support for this ADC.
- Data ready interrupt support, including hiz control for line.
- Oversampling ratio support.
* st,stm32-adc
- Support ID registers on parts where they are present, providing
discoverability of some features.
Fixes - late breaking fixes that I judged could wait for the merge window.
* adi,ad5593r
- Add a missing STOP condition between address write and data read.
- Check for related i2c functionality.
* adi,ad7923
- Fix shift reporting for some variants supported by the driver.
* infinion,dps310
- Work around a hardware issue where a chip can hang by adding a
timeout and reset path.
Cleanups
* Continuing work to switch to new pm macros.
* MAINTAINERS
- Drop duplication of wild card covered entry in ADI block and
add missing entries to cover ltc294x binding files.
* bosch,bma400
- Fix trivial smatch warning.
* bosch,bmp280
- Fix broken links to datasheets
* lltc,ltc2497
- Fix missing entry for ltc2499
* mexelis,mlx90614
- Switch to get_avail() callback for _available attributes.
* microchip,mcp3911
- Move to devm_ resource management for all elements of probe()
* tag 'iio-for-6.1b' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (57 commits)
iio: adc: mcp3911: add support for oversampling ratio
dt-bindings: iio: adc: mcp3911: add microchip,data-ready-hiz entry
iio: adc: mcp3911: add support for interrupts
iio: adc: mcp3911: add support for buffers
iio: adc: mcp3911: use resource-managed version of iio_device_register
iio: accel: bma400: Fix smatch warning based on use of unintialized value.
iio: light: st_uvis25: Use EXPORT_NS_SIMPLE_DEV_PM_OPS()
iio: accel: bmi088: Use EXPORT_NS_GPL_RUNTIME_DEV_PM_OPS() and pm_ptr()
iio: proximity: srf04: Use pm_ptr() to remove unused struct dev_pm_ops
iio: proximity: sx9360: Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
iio: proximity: sx9324: Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
iio: proximity: sx9310: Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
docs: iio: add documentation for BNO055 driver
iio: imu: add BNO055 I2C driver
iio: imu: add BNO055 serdev driver
dt-bindings: iio/imu: Add Bosch BNO055
iio: document "serialnumber" sysfs attribute
iio: document bno055 private sysfs attributes
iio: imu: add Bosch Sensortec BNO055 core driver
iio: add support for binary attributes
...
|
|
Document Lan9662 OTP controller.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220916122100.170016-12-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Document SoC compatible for sm6115.
Reviewed-by: Caleb Connolly <caleb@connolly.tech>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220916122100.170016-10-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Document compatibles for QFPROM used on IPQ8064 and SDM630. They are
compatible with generic QFPROM fallback.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220916122100.170016-7-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add compatible for MT8188 SoC.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Johnson Wang <johnson.wang@mediatek.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220916122100.170016-5-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The Data Ready Output Pin is either hard wired to work as high
impedance or push-pull. Make it configurable.
Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220815061625.35568-8-marcus.folkesson@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Introduce new documentation file for the Bosch BNO055 IMU.
Signed-off-by: Andrea Merello <andrea.merello@iit.it>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20220907132205.28021-12-andrea.merello@iit.it
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Document the new property to enable doubling the analog input range.
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220912081223.173584-4-nuno.sa@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Add device bindings for lsm6dstx IMU sensor.
Use lsm6dst as fallback device for lsm6dstx since it implements all the
features currently supported by lsm6dstx.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://lore.kernel.org/r/dadc2acf88b0b73feac9a8980ad9af1658297bc1.1663262890.git.lorenzo@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Update the bindings documentation for ltc2497 to include the ltc2499.
Signed-off-by: Ciprian Regus <ciprian.regus@analog.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220916140922.2506248-3-ciprian.regus@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Add bosch,bmp380 compatible string for the new family of sensors.
This family includes the BMP380, BMP384 and BMP388. The register map
in this family changes substantially and introduces new features
but core concepts and operations carryover from the previous iterations
Signed-off-by: Angel Iglesias <ang.iglesiasg@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/67224da4ae308bb752fc8fdecc54345cedab6c21.1663025017.git.ang.iglesiasg@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Extend the adi,adxl313.yaml file with information regrding the
ADXL312 and ADXL314 devices.
Signed-off-by: George Mois <george.mois@analog.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220905132018.364900-1-george.mois@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Add support for the ST LPS22DF, an I2C/SPI pressure sensor.
Signed-off-by: Martyn Welch <martyn.welch@collabora.co.uk>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220909161611.780720-1-martyn.welch@collabora.co.uk
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/coresight/linux into char-misc-next
Suzuki writes:
"coresight: Changes for v6.1
Coresight trace subsystem updates for v6.1 includes:
- Support for HiSilicon PTT trace
- Coresight cleanup of sysfs accessor functions, reduced
code size.
- Expose coresight timestamp source for ETMv4+
- DT binding updates to include missing properties
- Minor documentation, Kconfig text fixes.
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>"
* tag 'coresight-next-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/coresight/linux:
hwtracing: hisi_ptt: Fix up for "iommu/dma: Make header private"
MAINTAINERS: Add maintainer for HiSilicon PTT driver
docs: trace: Add HiSilicon PTT device driver documentation
hwtracing: hisi_ptt: Add tune function support for HiSilicon PCIe Tune and Trace device
hwtracing: hisi_ptt: Add trace function support for HiSilicon PCIe Tune and Trace device
iommu/arm-smmu-v3: Make default domain type of HiSilicon PTT device to identity
coresight: cti-sysfs: Mark coresight_cti_reg_store() as __maybe_unused
coresight: Make new csdev_access offsets unsigned
coresight: cti-sysfs: Re-use same functions for similar sysfs register accessors
coresight: Re-use same function for similar sysfs register accessors
coresight: Simplify sysfs accessors by using csdev_access abstraction
coresight: Remove unused function parameter
coresight: etm4x: docs: Add documentation for 'ts_source' sysfs interface
coresight: etm4x: Expose default timestamp source in sysfs
dt-bindings: arm: coresight-tmc: Add 'iommu' property
dt-bindings: arm: coresight: Add 'power-domains' property
coresight: docs: Fix a broken reference
coresight: trbe: fix Kconfig "its" grammar
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next
Jonathan writes:
1st set of IIO new device support, features and cleanup for 6.1
This includes Nuno Sa's work to move the IIO core over to generic firmware
properties rather than having DT specific code paths. Combined with Andy
Shevchenko's long term work on drivers, this leaves IIO in a good state for
handling other firmware types.
New device support
- liteon,ltrf216a
* New driver and dt bindings to support this Light sensor.
- maxim,max11205
* New driver for this 16bit single channel ADC.
- memsensing,msa311
* New driver for this accelerometer. Includes a string helper for read/write.
- richtek,rtq6056
* New driver and dt binding to support this current monitor used to measure
power usage.
- yamaha,yas530
* Support the YAS537 variant (series includes several fixes for other parts
and new driver features).
Staging graduation
- adi,ad7746 CDC. Cleanup conducted against set of roadtest tests using
the posted RFC of that framework.
Features
- core
* Large rework to make all the core IIO code use generic firmware properties.
Includes switching some drivers over as well using newly provided
generic interfaces and allowing removal of DT specific ones.
* Support for gesture event types for single and double tap. Used in
bosch,bma400.
- atmel,at91-sama5d2
* Add support for temperature sensor which uses two muxed inputs to estimate
the temperature.
* Handle trackx bits of EMR register to improve temp sampling accuracy.
* Runtime PM support.
- liteon,ltrf216a
* Add a _raw channel output to allow working around an issue with
differing conversions equations that breaks some user space controls.
- mexelis,mlx90632
* Support regulator control.
- ti,tsc2046
* External reference voltage support.
Clean up and minor fixes
- Tree-wide
* devm_clk_get_enabled() replacements of opencoded equivalent.
* Remaining IIO_DMA_MINALIGN conversions (the staging/iio drivers).
* Various minor warning and similar cleanup such as missing static
markings.
* strlcpy() to strscpy() for cases where return value not checked.
* provide units.h entries for more HZ units and use them in drivers.
- dt-bindings cleanup
* Drop maintainers listss where the email address is bouncing.
* Switch spi devices over to using spi-peripheral.yaml
* Add some missing unevaluatedProperties / additionalProperties: false
entries.
- ABI docs
* Add some missing channel type specific sampling frequency entries.
* Add parameter names for callback parameters.
- MAINTAINERS
* Fix wrong ADI forum links.
- core
* lockdep class per device, to avoid an issue with nest when one IIO
device is the consumer of another.
* White space tweaks.
- asc,dlhl60d
* Use get_unaligned_be24 to avoid some unusual data manipulation and masking.
- atmel,at91-sama5d2
* Fix wrong max value.
* Improve error handling when measuring pressure and touch.
* Add locks to remove races on updating oversampling / sampling freq.
* Add missing calls in suspend and resume path to ensure state is correctly
brought up if buffered capture was in use when suspend happened.
* Error out of write_raw() callback if buffered capture enabled to avoid
unpredictable behavior.
* Handle different versions having different oversampling ratio support and
drop excess error checking.
* Cleanup magic value defines where the name is just the value and hence
hurts readability.
* Use read_avail() callback to provide info on possible oversampling ratios.
* Correctly handle variable bit depth when doing oversampling on different
supported parts. Also handle higher oversampling ratios.
- fsl,imx8qxp
* Don't ignore errors from regulator_get_voltage() so as to avoid some
very surprising scaling.
- invensense,icp10100
* Switch from UNIVERSAL to DEFINE_RUNTIME_DEV_PM_OPS. UNIVERSAL rarely made
sense and is now deprecated. In this driver we just avoid double disabling
in some paths.
- maxim,max1363
* Drop consumer channel map provision by platform data. There have been
better ways of doing this for years and there are no in tree users.
- microchip,mcp3911
* Update status to maintained.
- qcom,spmi-adc5
* Support measurement of LDO output voltage.
- qcom,spmi-adc
* Add missing channel available on SM6125 SoC.
- st,stmpe
* Drop requirement on node name in binding now that driver correctly
doesn't enforce it.
- stx104
* Move to more appropriate addac directory
- ti,am335x
* Document ti,am654-adc compatible already in use in tree.
- ti,hmc5843
* Move dev_pm_ops out of header and use new pm macros to handle export.
- yamaha,yas530
* Minor cleanups.
* tag 'iio-for-6.1a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (142 commits)
iio: pressure: icp10100: Switch from UNIVERSAL to DEFINE_RUNTIME_DEV_PM_OPS().
iio: adc: max1363: Drop provision to provide an IIO channel map via platform data
iio: accel: bma400: Add support for single and double tap events
iio: Add new event type gesture and use direction for single and double tap
iio: Use per-device lockdep class for mlock
iio: adc: add max11205 adc driver
dt-bindings: iio: adc: Add max11205 documentation file
iio: magnetometer: yamaha-yas530: Use dev_err_probe()
iio: magnetometer: yamaha-yas530: Make strings const in chip info
iio: magnetometer: yamaha-yas530: Use pointers as driver data
iio: adc: tsc2046: silent spi_device_id warning
iio: adc: tsc2046: add vref support
dt-bindings: iio: adc: ti,tsc2046: add vref-supply property
iio: light: ltrf216a: Add raw attribute
dt-bindings: iio: Add missing (unevaluated|additional)Properties on child nodes
MAINTAINERS: fix Analog Devices forum links
iio/accel: fix repeated words in comments
dt-bindings: iio: accel: add dt-binding schema for msa311 accel driver
iio: add MEMSensing MSA311 3-axis accelerometer driver
dt-bindings: vendor-prefixes: add MEMSensing Microsystems Co., Ltd.
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/fpga/linux-fpga into char-misc-next
Xu writes:
FPGA Manager changes for 6.1-rc1
DFL
- Matthew's change adds new device IDs supported by DFL.
- Dan's change uses array_size() for memory allocation to prevent
potential overflow
Microchip
- Conor's change adds MODULE_AUTHOR entry for microchip-spi driver
- Krzysztof's change refines dt-bindings
Intel m10 bmc secure update
- Russ's change adds new device ID supported by the driver
All patches have been reviewed on the mailing list, and have been in the
last linux-next releases (as part of our for-next branch).
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
* tag 'fpga-for-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/fpga/linux-fpga:
fpga: m10bmc-sec: d5005 bmc secure update driver
fpga: prevent integer overflow in dfl_feature_ioctl_set_irq()
dt-bindings: fpga: microchip,mpf-spi-fpga-mgr: use spi-peripheral-props.yaml
fpga: microchip-spi: add missing module author entry
fpga: dfl-pci: Add IDs for Intel N6000, N6001 and C6100 cards
|
|
Add bindings documentation file and MAINTAINERS entry for MAX11205.
Signed-off-by: Ramona Bolboaca <ramona.bolboaca@analog.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220831133021.215625-1-ramona.bolboaca@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Add property for the voltage reference supply.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220904100203.3614502-1-o.rempel@pengutronix.de
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
- GT1158 ID added to Goodix touchscreen driver
- Boeder Force Feedback Wheel USB added to iforce joystick driver
- fixup for iforce driver to avoid hangups
- fix autoloading of rk805-pwrkey driver.
* tag 'input-for-v6.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: iforce - add support for Boeder Force Feedback Wheel
Input: iforce - wake up after clearing IFORCE_XMIT_RUNNING flag
Input: goodix - add compatible string for GT1158
MAINTAINERS: add include/dt-bindings/input to INPUT DRIVERS
Input: rk805-pwrkey - fix module autoloading
Input: goodix - add support for GT1158
dt-bindings: input: touchscreen: add compatible string for Goodix GT1158
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are some small char/misc and other driver fixes for 6.0-rc4.
Included in here are:
- binder fixes for previous fixes, and a few more fixes uncovered by
them.
- iio driver fixes
- soundwire driver fixes
- fastrpc driver fixes for memory corruption on some hardware
- peci driver fix
- mhi driver fix
All of these have been in linux-next with no reported problems"
* tag 'char-misc-6.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
binder: fix alloc->vma_vm_mm null-ptr dereference
misc: fastrpc: increase maximum session count
misc: fastrpc: fix memory corruption on open
misc: fastrpc: fix memory corruption on probe
soundwire: qcom: fix device status array range
bus: mhi: host: Fix up null pointer access in mhi_irq_handler
soundwire: qcom: remove duplicate reset control get
iio: light: cm32181: make cm32181_pm_ops static
iio: ad7292: Prevent regulator double disable
dt-bindings: iio: gyroscope: bosch,bmg160: correct number of pins
iio: adc: mcp3911: use correct formula for AD conversion
iio: adc: mcp3911: correct "microchip,device-addr" property
Revert "binder_alloc: Add missing mmap_lock calls when using the VMA"
binder_alloc: Add missing mmap_lock calls when using the VMA
binder: fix UAF of ref->proc caused by race condition
iio: light: cm3605: Fix an error handling path in cm3605_probe()
iio: adc: mcp3911: make use of the sign bit
peci: cpu: Fix use-after-free in adev_release()
peci: aspeed: fix error check return value of platform_get_irq()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB/Thunderbolt driver fixes from Greg KH:
"Here are a lot of small USB and Thunderbolt driver fixes for 6.0-rc4
for reported problems. Included in here are:
- new usb-serial driver ids
- dwc3 driver bugfixes for reported problems with 6.0-rc1
- new device quirks, and reverts of some quirks that were incorrect
- gadget driver bugfixes for reported problems
- USB host controller bugfixes (xhci and others)
- other small USB fixes, details in the shortlog
- small thunderbolt driver fixes
All of these have been in linux-next with no reported issues"
* tag 'usb-6.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (51 commits)
Revert "usb: gadget: udc-xilinx: replace memcpy with memcpy_toio"
usb: storage: Add ASUS <0x0b05:0x1932> to IGNORE_UAS
USB: serial: ch341: fix disabled rx timer on older devices
USB: serial: ch341: fix lost character on LCR updates
USB: serial: cp210x: add Decagon UCA device id
Revert "usb: add quirks for Lenovo OneLink+ Dock"
usb: cdns3: fix issue with rearming ISO OUT endpoint
usb: cdns3: fix incorrect handling TRB_SMM flag for ISOC transfer
usb: gadget: mass_storage: Fix cdrom data transfers on MAC-OS
media: mceusb: Use new usb_control_msg_*() routines
USB: core: Prevent nested device-reset calls
USB: gadget: Fix obscure lockdep violation for udc_mutex
usb: dwc2: fix wrong order of phy_power_on and phy_init
usb: gadget: udc-xilinx: replace memcpy with memcpy_toio
usb: typec: Remove retimers properly
usb: dwc3: disable USB core PHY management
usb: add quirks for Lenovo OneLink+ Dock
USB: serial: option: add support for Cinterion MV32-WA/WB RmNet mode
USB: serial: ftdi_sio: add Omron CS1W-CIF31 device id
USB: serial: option: add Quectel EM060K modem
...
|
|
In order to ensure only documented properties are present, node schemas
must have unevaluatedProperties or additionalProperties set to false
(typically).
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220823145649.3118479-2-robh@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Introduce devicetree binding json-schema for MSA311 tri-axial,
low-g accelerometer driver.
Signed-off-by: Dmitry Rokosov <ddrokosov@sberdevices.ru>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220822175011.2886-5-ddrokosov@sberdevices.ru
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
MEMSensing Microsystems (Suzhou, China) Co., Ltd. operates as a micro
electromechanical system technology company which produces micro
electromechanical system microphones and sensors.
MEMSensing Microsystems (Suzhou, China) Co., Ltd. applies its products
in consumer electronics, industrial control, medical electronics
and automotive, and other fields.
Signed-off-by: Dmitry Rokosov <ddrokosov@sberdevices.ru>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220822175011.2886-3-ddrokosov@sberdevices.ru
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Merge thermal control core fixes for 6.0-rc3:
- Fix missing required property for thermal zone description (Daniel
Lezcano).
- Add missing export symbol for
thermal_zone_device_register_with_trips() (Daniel Lezcano).
* thermal-core:
dt-bindings: thermal: Fix missing required property
thermal/core: Add missing EXPORT_SYMBOL_GPL
|
|
The Coresight TMC component may be behind an IOMMU which is the case for
the Arm Juno SoC and some Qualcomm SoCs. Add 'iommus' property to the
binding.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220721212718.1980905-2-robh@kernel.org
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
|
|
Coresight components may be in a power domain which is the case for the Arm
Juno board. Allow a single 'power-domains' entry for Coresight components.
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/20220721212718.1980905-1-robh@kernel.org
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
|
|
BMG160 has two interrupt pins to which interrupts can be freely mapped.
Correct the schema to express such case and fix warnings like:
qcom/msm8916-alcatel-idol347.dtb: gyroscope@68: interrupts: [[97, 1], [98, 1]] is too long
However the basic issue still persists - the interrupts should come in a
defined order.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220805075503.16983-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Instead of listing directly properties typical for SPI peripherals,
reference the spi-peripheral-props.yaml schema. This allows using all
properties typical for SPI-connected devices, even these which device
bindings author did not tried yet.
Remove the spi-* properties which now come via spi-peripheral-props.yaml
schema, except for the cases when device schema adds some constraints
like maximum frequency.
While changing additionalProperties->unevaluatedProperties, put it in
typical place, just before example DTS.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220816124321.67817-11-krzysztof.kozlowski@linaro.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Instead of listing directly properties typical for SPI peripherals,
reference the spi-peripheral-props.yaml schema. This allows using all
properties typical for SPI-connected devices, even these which device
bindings author did not tried yet.
Remove the spi-* properties which now come via spi-peripheral-props.yaml
schema, except for the cases when device schema adds some constraints
like maximum frequency.
While changing additionalProperties->unevaluatedProperties, put it in
typical place, just before example DTS.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220816124321.67817-10-krzysztof.kozlowski@linaro.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Instead of listing directly properties typical for SPI peripherals,
reference the spi-peripheral-props.yaml schema. This allows using all
properties typical for SPI-connected devices, even these which device
bindings author did not tried yet.
Remove the spi-* properties which now come via spi-peripheral-props.yaml
schema, except for the cases when device schema adds some constraints
like maximum frequency.
While changing additionalProperties->unevaluatedProperties, put it in
typical place, just before example DTS.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220816124321.67817-9-krzysztof.kozlowski@linaro.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Instead of listing directly properties typical for SPI peripherals,
reference the spi-peripheral-props.yaml schema. This allows using all
properties typical for SPI-connected devices, even these which device
bindings author did not tried yet.
Remove the spi-* properties which now come via spi-peripheral-props.yaml
schema, except for the cases when device schema adds some constraints
like maximum frequency.
While changing additionalProperties->unevaluatedProperties, put it in
typical place, just before example DTS.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220816124321.67817-8-krzysztof.kozlowski@linaro.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Instead of listing directly properties typical for SPI peripherals,
reference the spi-peripheral-props.yaml schema. This allows using all
properties typical for SPI-connected devices, even these which device
bindings author did not tried yet.
Remove the spi-* properties which now come via spi-peripheral-props.yaml
schema, except for the cases when device schema adds some constraints
like maximum frequency.
While changing additionalProperties->unevaluatedProperties, put it in
typical place, just before example DTS.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220816124321.67817-7-krzysztof.kozlowski@linaro.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Instead of listing directly properties typical for SPI peripherals,
reference the spi-peripheral-props.yaml schema. This allows using all
properties typical for SPI-connected devices, even these which device
bindings author did not tried yet.
Remove the spi-* properties which now come via spi-peripheral-props.yaml
schema, except for the cases when device schema adds some constraints
like maximum frequency.
While changing additionalProperties->unevaluatedProperties, put it in
typical place, just before example DTS.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220816124321.67817-6-krzysztof.kozlowski@linaro.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Instead of listing directly properties typical for SPI peripherals,
reference the spi-peripheral-props.yaml schema. This allows using all
properties typical for SPI-connected devices, even these which device
bindings author did not tried yet.
Remove the spi-* properties which now come via spi-peripheral-props.yaml
schema, except for the cases when device schema adds some constraints
like maximum frequency.
While changing additionalProperties->unevaluatedProperties, put it in
typical place, just before example DTS.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220816124321.67817-5-krzysztof.kozlowski@linaro.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Instead of listing directly properties typical for SPI peripherals,
reference the spi-peripheral-props.yaml schema. This allows using all
properties typical for SPI-connected devices, even these which device
bindings author did not tried yet.
Remove the spi-* properties which now come via spi-peripheral-props.yaml
schema, except for the cases when device schema adds some constraints
like maximum frequency.
While changing additionalProperties->unevaluatedProperties, put it in
typical place, just before example DTS.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220816124321.67817-4-krzysztof.kozlowski@linaro.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Instead of listing directly properties typical for SPI peripherals,
reference the spi-peripheral-props.yaml schema. This allows using all
properties typical for SPI-connected devices, even these which device
bindings author did not tried yet.
Remove the spi-* properties which now come via spi-peripheral-props.yaml
schema, except for the cases when device schema adds some constraints
like maximum frequency.
While changing additionalProperties->unevaluatedProperties, put it in
typical place, just before example DTS.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220816124321.67817-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Instead of listing directly properties typical for SPI peripherals,
reference the spi-peripheral-props.yaml schema. This allows using all
properties typical for SPI-connected devices, even these which device
bindings author did not tried yet.
Remove the spi-* properties which now come via spi-peripheral-props.yaml
schema, except for the cases when device schema adds some constraints
like maximum frequency.
While changing additionalProperties->unevaluatedProperties, put it in
typical place, just before example DTS.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220816124321.67817-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Emails to Patrick Vasseur bounce ("Unknown To address").
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220816125401.70317-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Emails to Tomislav Denis bounce ("550 5.1.1 User Unknown").
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220816125401.70317-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Pull drm fixes from Dave Airlie:
"Regular weekly fixes.
The nouveau patch just enables modesetting on GA103 hw which is like
other ampere cards that are already supported. amdgpu has 2 weeks of
fixes, as Alex was away, so a bit larger than usual, otherwise some
i915 and misc other fixes.
ttm:
- NULL ptr dereference
i915:
- disable pci resize on 32-bit systems
- don't leak the ccs state
- TLB invalidation fixes
nouveau:
- GA103 enablement
- off-by-one fix
amdgpu:
- Revert some DML stack changes
- Rounding fixes in KFD allocations
- atombios vram info table parsing fix
- DCN 3.1.4 fixes
- Clockgating fixes for various new IPs
- SMU 13.0.4 fixes
- DCN 3.1.4 FP fixes
- TMDS fixes for YCbCr420 4k modes
- DCN 3.2.x fixes
- USB 4 fixes
- SMU 13.0 fixes
- SMU driver unload memory leak fixes
- Display orientation fix
- Regression fix for generic fbdev conversion
- SDMA 6.x fixes
- SR-IOV fixes
- IH 6.x fixes
- Use after free fix in bo list handling
- Revert pipe1 support
- XGMI hive reset fix
amdkfd:
- Fix potential crach in kfd_create_indirect_link_prop()
imx:
- warning fix
meson:
- refcounting fix
lvds-codec:
- error check fix
sun4i:
- underflow fix
- dt-binding fix"
* tag 'drm-fixes-2022-08-19' of git://anongit.freedesktop.org/drm/drm: (109 commits)
Revert "drm/amd/amdgpu: add pipe1 hardware support"
drm/amdgpu: Fix use-after-free on amdgpu_bo_list mutex
drm/amdgpu: Fix interrupt handling on ih_soft ring
drm/amdgpu: Add secure display TA load for Renoir
drm/amd/display: Include scaling factor for SubVP command
drm/amdgpu/vcn: Return void from the stop_dbg_mode
drm/amdgpu: remove useless condition in amdgpu_job_stop_all_jobs_on_sched()
drm/amdgpu: Add decode_iv_ts helper for ih_v6 block
drm/amd/display: add chip revision to DCN32
drm/amd/display: avoid doing vm_init multiple time
drm/amd/display: Use pitch when calculating size to cache in MALL
drm/amd/display: Don't set DSC for phantom pipes
drm/amd/display: Update clock table policy for DCN314
drm/amd/display: Modify header inclusion pattern
drm/amd/display: Fix plug/unplug external monitor will hang while playback MPO video
drm/amd/display: Add debug parameter to retain default clock table
drm/amdgpu: Increase tlb flush timeout for sriov
drm/amd/display: do not compare integers of different widths
drm/amd/display: Add reserved dc_log_type.
drm/amd/display: Fix pixel clock programming
...
|
|
Add a new compatible for mt8188
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/20220819081027.32382-1-chunfeng.yun@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from netfilter.
Current release - regressions:
- tcp: fix cleanup and leaks in tcp_read_skb() (the new way BPF
socket maps get data out of the TCP stack)
- tls: rx: react to strparser initialization errors
- netfilter: nf_tables: fix scheduling-while-atomic splat
- net: fix suspicious RCU usage in bpf_sk_reuseport_detach()
Current release - new code bugs:
- mlxsw: ptp: fix a couple of races, static checker warnings and
error handling
Previous releases - regressions:
- netfilter:
- nf_tables: fix possible module reference underflow in error path
- make conntrack helpers deal with BIG TCP (skbs > 64kB)
- nfnetlink: re-enable conntrack expectation events
- net: fix potential refcount leak in ndisc_router_discovery()
Previous releases - always broken:
- sched: cls_route: disallow handle of 0
- neigh: fix possible local DoS due to net iface start/stop loop
- rtnetlink: fix module refcount leak in rtnetlink_rcv_msg
- sched: fix adding qlen to qcpu->backlog in gnet_stats_add_queue_cpu
- virtio_net: fix endian-ness for RSS
- dsa: mv88e6060: prevent crash on an unused port
- fec: fix timer capture timing in `fec_ptp_enable_pps()`
- ocelot: stats: fix races, integer wrapping and reading incorrect
registers (the change of register definitions here accounts for
bulk of the changed LoC in this PR)"
* tag 'net-6.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (77 commits)
net: moxa: MAC address reading, generating, validity checking
tcp: handle pure FIN case correctly
tcp: refactor tcp_read_skb() a bit
tcp: fix tcp_cleanup_rbuf() for tcp_read_skb()
tcp: fix sock skb accounting in tcp_read_skb()
igb: Add lock to avoid data race
dt-bindings: Fix incorrect "the the" corrections
net: genl: fix error path memory leak in policy dumping
stmmac: intel: Add a missing clk_disable_unprepare() call in intel_eth_pci_remove()
net: ethernet: mtk_eth_soc: fix possible NULL pointer dereference in mtk_xdp_run
net/mlx5e: Allocate flow steering storage during uplink initialization
net: mscc: ocelot: report ndo_get_stats64 from the wraparound-resistant ocelot->stats
net: mscc: ocelot: keep ocelot_stat_layout by reg address, not offset
net: mscc: ocelot: make struct ocelot_stat_layout array indexable
net: mscc: ocelot: fix race between ndo_get_stats64 and ocelot_check_stats_work
net: mscc: ocelot: turn stats_lock into a spinlock
net: mscc: ocelot: fix address of SYS_COUNT_TX_AGING counter
net: mscc: ocelot: fix incorrect ndo_get_stats64 packet counters
net: dsa: felix: fix ethtool 256-511 and 512-1023 TX packet counters
net: dsa: don't warn in dsa_port_set_state_now() when driver doesn't support it
...
|
|
Lots of double occurrences of "the" were replaced by single occurrences,
but some of them should become "to the" instead.
Fixes: 12e5bde18d7f6ca4 ("dt-bindings: Fix typo in comment")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/c5743c0a1a24b3a8893797b52fed88b99e56b04b.1660755148.git.geert+renesas@glider.be
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a compatible for DWC3 found on SM6375.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220716193257.456023-4-konrad.dybcio@somainline.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add a wakeup-source property to the binding to describe whether the
wakeup interrupts can wake the system from suspend.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20220804151001.23612-8-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
One patch for imx/dcss to get rid of a warning message, one off-by-one
fix and GA103 support for nouveau, a refcounting fix for meson, a NULL
pointer dereference fix for ttm, a error check fix for lvds-codec, a
dt-binding schema fix and an underflow fix for sun4i
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220816094401.wtadc7ddr6lzq6aj@houat
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A few fixes that came in since my pull request, the Meson fix is a
little large since it's fixing all possible cases of the problem that
was observed with the driver and clock API trying to share
configuration by integrating the device clocking fully with the clock
API rather than spot fixing the one instance that was observed"
* tag 'spi-fix-v6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: dt-bindings: Drop Pratyush Yadav
spi: meson-spicc: add local pow2 clock ops to preserve rate between messages
MAINTAINERS: rectify entry for ARM/HPE GXP ARCHITECTURE
spi: spi.c: Add missing __percpu annotations in users of spi_statistics
|
