| Age | Commit message (Collapse) | Author |
|---|
|
https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux into soc/dt
Amlogic drivers changes for v6.14:
- Document the System Control registers found on early Meson SoC
* tag 'amlogic-drivers-for-v6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux:
dt-bindings: soc: amlogic,meson-gx-hhi-sysctrl: Document the System Control registers found on early Meson SoC
Link: https://lore.kernel.org/r/d22513cc-c326-443c-982b-78adf755d3dc@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt
Qualcomm Arm64 DeviceTree updates for v6.14
This adds support for the new Snapdragon 8 Elite platform with MTP and
QRD boards, QCS615 platform with the Ride board, QCS8300 platform with
its Ride board, IPQ5424 platform with the RDP466 board, MSM8917 platform
with Xiaomi Redmi 5A, and the SAR2130P platform with the Snapdragon AR2
Gen1 Smart Viewer Development Kit.
On X Elite the HP Omnibook X laptop and the Snapdragon Devkit are added.
The 8cx Gen3-based Huawaei Matebook E Go and Microsoft Windows Dev Kit
2023 are introduced.
IPQ9574 gains PCIe and TRNG descriptions, together with a few other
smaller improvements. TRNG is also enabled on the IPQ5332 platform.
On MSM8994, Huawei Nexus 6P gains power and volume keys support. USB
interrupts are corrected.
On QCM6490 the FairPhone 5 gains camera EEPROM and Rb3Gen2 development
kit gains description of the onboard LEDs.
On QRB4210 RB2 support for HDMI audio playback is added.
SA8775P gains missing clock controllers, CPUs are tied to PSCI power
domains, DisplayPort is introduced and enabled on the Ride board.
On SDM670 the GPU components are described and enabled for Google Pixel
3a, together with camera clock controller and flash LED.
Xiaomi Mi Pad 5 Pro, on SM8250, gets WiFi and Bluetooth enabled.
"global" IRQ for PCIe RC controllers are described on SM8550 and SM8650,
to allow for hotplug events.
Coresight support is added for SM8450, SM8650, X 1 Elite, QCS615,
and QCS8300.
The X Elite platform gains QUP power domains and OPPs, another PCIe
controller, another UART, and its SDHCI controllers. The ASUS Vivobook S
15 gets GPU and lid switch enabled. Microsoft Surface Laptop 7 gains
audio configuration, SD card reader support, and USB retimers. The
Lenovo Yoga Slim 7x gets its LID switch described. Dell XPS 13 gains
retimers described. The Lenovo Thinkpad T14s has additional USB ports
enabled, as well as sound and fingerprint sensor.
USB U1/U2 entry is disabled across a variety of platforms, to improve
USB stability.
sleep clock frequencies are reviewed and corrected for a variety of
platforms, so is also various remoteproc mmio address ranges.
* tag 'qcom-arm64-for-6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (240 commits)
arm64: dts: qcom: x1e80100-romulus: Update firmware nodes
arm64: dts: qcom: msm8916-samsung-serranove: Add display panel
arm64: dts: qcom: sm8650: Add 'global' interrupt to the PCIe RC nodes
arm64: dts: qcom: sm8550: Add 'global' interrupt to the PCIe RC nodes
arm64: dts: qcom: Remove unused and undocumented properties
arm64: dts: qcom: sdm450-lenovo-tbx605f: add DSI panel nodes
arm64: dts: qcom: pmi8950: add LAB-IBB nodes
arm64: dts: qcom: ipq5424: enable the download mode support
arm64: dts: qcom: ipq5424: add scm node
arm64: dts: qcom: sm8250: Fix interrupt types of camss interrupts
arm64: dts: qcom: sdm845: Fix interrupt types of camss interrupts
arm64: dts: qcom: sc8280xp: Fix interrupt type of camss interrupts
arm64: dts: qcom: qcs8300-ride: Enable USB controllers
arm64: dts: qcom: qcs8300: Add support for usb nodes
arm64: dts: qcom: qcs8300: Add support for clock controllers
arm64: dts: qcom: sm8450: Add coresight nodes
arm64: dts: qcom: sa8775p: Fix the size of 'addr_space' regions
arm64: dts: qcom: qcs615-ride: Enable UFS node
arm64: dts: qcom: qcs615: add UFS node
arm64: dts: qcom: ipq5424: Add USB controller and phy nodes
...
Link: https://lore.kernel.org/r/20250111181025.394631-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt
New boards rk3576-evb1, H96 Max V58 TV Box (rk3588), BigTreeTech CB2
(SoM + baseboard) and Pi2 (SBC), Firefly ITX-3588J (Core-3588J SoM),
Orange Pi 5 Max.
A interesting case is the Radxa E52C using a soc called rk3582. This is
rk3588-variant where some cpu cores are disabled during production and
the bootloader needs to read the available cores from efuses and adapt
the DT it hands over to the kernel.
New supported peripherals are just the naneng combophy + the usb
controllers using them on the rk3576 as well as the arm,smmu attached
to the PCI controller on rk3588.
And finally there are of course a number of board-specific enablements
and refinements (MCU on Qnap-TS433, USB3 on NanoPi R6C/R6S and Orange Pi
5+ etc.
* tag 'v6.14-rockchip-dts64-1' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (31 commits)
arm64: dts: rockchip: add DTs for Firefly ITX-3588J and its Core-3588J SoM
dt-bindings: arm: rockchip: Add Firefly ITX-3588J board
arm64: dts: rockchip: Add Orange Pi 5 Max board
dt-bindings: arm: rockchip: Add Xunlong Orange Pi 5 Max
arm64: dts: rockchip: refactor common rk3588-orangepi-5.dtsi
arm64: dts: rockchip: add WLAN to rk3588-evb1 controller
arm64: dts: rockchip: increase gmac rx_delay on rk3399-puma
arm64: dts: rockchip: Delete redundant RK3328 GMAC stability fixes
arm64: dts: rockchip: enable hdmi out audio on wolfvision pf5
arm64: dts: rockchip: fix num-channels property of wolfvision pf5 mic
arm64: dts: rockchip: Enable the USB 3.0 port on NanoPi R6C/R6S
arm64: dts: rockchip: Add FRAM MB85RS128TY to rk3568-mecsbc
arm64: dts: rockchip: Remove unused i2c2 node from rk3568-mecsbc
arm64: dts: rockchip: Fix PCIe3 handling for Edgeble-6TOPS Modules
arm64: dts: rockchip: Add Radxa E52C
dt-bindings: arm: rockchip: Add Radxa E52C
arm64: dts: rockchip: Add BigTreeTech CB2 and Pi2
dt-bindings: arm: rockchip: Add BigTreeTech CB2 and Pi2
arm64: dts: rockchip: Enable USB 3.0 ports on orangepi-5-plus
arm64: dts: rockchip: Add H96 Max V58 TV Box based on RK3588 SoC
...
Link: https://lore.kernel.org/r/2193001.3Lj2Plt8kZ@diego
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into soc/dt
TI K3 device tree updates for v6.14
Generic Fixups/Cleanups:
- Remove unused and undocumented "ti,(rx|tx)-fifo-depth" properties for
ethernet phy
- Clock description added to ICSS-G
SoC Specific features and Fixes:
- Duplicate GICR reg defines in am62x/am62ax
- Mailbox nodes are enabled at board level bringing AM67/j722s/am62p to same
behavior as other K3 SoCs.
- Introduction of deep-sleep state defines for pinctrl header
AM62Ax
- Enable ti-sysc for wkup_uart0
AM64:
- Switch ICSSG clock to core clock.
J7200:
- Disable SPI1 loopback default.
J784s4:
- Clock ID fix for McSPI instances
- Use j7200-padconf compatibility for padconf to enable suspend-to-ram support.
Board Specific:
AM62
- phyboard - hdmi bridge regulator and using 16bit input for hdmi bridge,
vcc-supply for i2c eeprom
- SK - SoC wakeup using USB1, Add bootph property around cpsw mac syscon node,
M4 mailbox node redefinition fixup.
- BeaglePlay: Fix ethernet phy reset time
AM64
- hummingboard-t: Convert PCIE/USB overlays to independent dts.
j7200:
- EVM: fix typo in overlay name.
j721e:
- EVM: overlay for pcie1 endpoint mode.
j722s:
- EVM: Add mcu_i2c0 support for expansion pins., Add USB0 DFU support, Enable
PMIC
- AM67a-beagley-ai: Add remote proc nodes
j784s4:
- AM69-SK/ j784s4-EVM - Mark PMIC regulators with bootph-all property to
indicate ones that are needed through boot phases.
- AM69-sk: PIC0 Endpoint mode overlay, USB Superspeed mode.
* tag 'ti-k3-dt-for-v6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux: (31 commits)
arm64: dts: ti: k3-am62a-wakeup: Configure ti-sysc for wkup_uart0
arm64: dts: ti: k3-j722s-evm: Enable PMIC
arm64: dts: ti: k3-am69-sk: Add USB SuperSpeed support
arm64: dts: ti: k3-am625-beagleplay: Fix DP83TD510E reset time
arm64: dts: ti: k3-am642-hummingboard-t: Convert overlay to board dts
arm64: dts: ti: k3-am69-sk: Add overlay for PCIE0 Endpoint Mode
arm64: dts: ti: k3-am68-sk-base-board: Add overlay for PCIE1 Endpoint Mode
arm64: dts: ti: k3-j721e-evm: Add overlay for PCIE1 Endpoint Mode
arm64: dts: ti: Makefile: Fix typo "k3-j7200-evm-pcie1-ep.dtbo"
arm64: dts: ti: k3-j7200: Add node to disable loopback connection
arm64: dts: ti: k3-j784s4: Use ti,j7200-padconf compatible
arm64: dts: ti: k3-am62p-j722s-common-main: Enable USB0 for DFU boot
arm64: dts: ti: k3-am62a: Remove duplicate GICR reg
arm64: dts: ti: k3-am62: Remove duplicate GICR reg
arm64: dts: ti: k3-am67a-beagley-ai: Add remote processor nodes
arm64: dts: ti: k3-am62p: Enable Mailbox nodes at the board level
arm64: dts: ti: k3-am625-sk: Remove M4 mailbox node redefinition
arm64: dts: ti: k3-j722s-evm: Enable support for mcu_i2c0
arm64: dts: ti: k3-am62x-sk-common: Add bootph-all property in cpsw_mac_syscon node
arm64: dts: ti: Remove unused and undocumented "ti,(rx|tx)-fifo-depth" properties
...
Link: https://lore.kernel.org/r/20250110210812.bdpypzvmg6s6sr5t@itinerary
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Document the Universal Flash Storage(UFS) Host Controller on the Qualcomm
QCS615 Platform.
Signed-off-by: Sayali Lokhande <quic_sayalil@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Co-developed-by: Xin Liu <quic_liuxin@quicinc.com>
Signed-off-by: Xin Liu <quic_liuxin@quicinc.com>
Link: https://lore.kernel.org/r/20241216095439.531357-2-quic_liuxin@quicinc.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Update dt-bindings to add IPQ5424 to USB DWC3 controller list.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
Link: https://lore.kernel.org/r/20241118052839.382431-6-quic_varada@quicinc.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
https://github.com/Broadcom/stblinux into soc/dt
This pull request contains Broadcom ARM64-based SoCs Device Tree updates
for 6.14:
- Dave adds the display pipeline DT nodes on BCM2712 (Raspberry Pi 5)
- Rob removes some undocumented properties
- Same ensures that the CFE stub area is reserved to allow secondary
CPUs to be successfully brought up in Linux, also making sure that the
address used in the spin table is also carved out. Finally he adds
support for the Zyxel EX3510-B router using BCM4906
- Rosen converts the BCM4908 platforms to use the more flexible
nvmem-layout representation
* tag 'arm-soc/for-6.14/devicetree-arm64' of https://github.com/Broadcom/stblinux:
arm64: dts: bcm4908: nvmem-layout conversion
arm64: dts: broadcom: bcmbca: bcm4908: Add DT for Zyxel EX3510-B
dt-bindings: arm64: bcmbca: Add Zyxel EX3510-B based on BCM4906
arm64: dts: broadcom: bcmbca: bcm4908: Protect cpu-release-addr
arm64: dts: broadcom: bcmbca: bcm4908: Reserve CFE stub area
arm64: dts: broadcom: Remove unused and undocumented properties
arm64: dts: broadcom: Add DT for D-step version of BCM2712
arm64: dts: broadcom: Add display pipeline support to BCM2712
arm64: dts: broadcom: Add firmware clocks and power nodes to Pi5 DT
Link: https://lore.kernel.org/r/20250109224756.3632025-2-florian.fainelli@broadcom.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://github.com/Broadcom/stblinux into soc/dt
This pull request contains Broadcom ARM-based SoCs Device Tree updates
for 6.14, please pull the following:
- Rob removes some unused and undocumented properties pertaining to the
SPI flash controller on Broadcom boards
- Linus adds a number of BCM6846 peripherals: HWRNG, watchdog, GPIO,
MDIO, LED controller, DMA and then proceeds with adding support for
the GEnexsis XG6846B PON router
- Rosen sets the MAC address NVMEM reference on the Meraki MR26 platform
* tag 'arm-soc/for-6.14/devicetree' of https://github.com/Broadcom/stblinux:
ARM: dts: meraki-mr26: set mac address for gmac0
ARM: dts: broadcom: Add Genexis XG6846B DTS file
dt-bindings: arm: bcmbca: Add Genexis XG6846B
dt-bindings: vendor-prefixes: Add Genexis
ARM: dts: bcm6846: Add ARM PL081 DMA block
ARM: dts: bcm6846: Add LED controller
ARM: dts: bcm6846: Add MDIO control block
ARM: dts: bcm6846: Add GPIO blocks
ARM: dts: bcm6846: Enable watchdog
ARM: dts: bcm6846: Add iproc rng
arm: dts: broadcom: Remove unused and undocumented properties
Link: https://lore.kernel.org/r/20250109224756.3632025-1-florian.fainelli@broadcom.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into soc/dt
Allwinner Device Tree changes for 6.14
- Add support for DMA engine and audio codec on F1C100s
and enable audio codec on Lichee Pi Nano
- Add syscon and SRAM nodes for A100
- Enable CPU DVFS for Tanix TX1
- Explicitly configure TCON0 pixel clock parent according to display
output used
This includes one commit shared with the clock tree
dt-bindings: clock: sunxi: Export PLL_VIDEO_2X and PLL_MIPI
which adds the macros for the TCON0 pixel clock parents.
* tag 'sunxi-dt-for-6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
arm64: dts: allwinner: a64: explicitly assign clock parent for TCON0
dt-bindings: clock: sunxi: Export PLL_VIDEO_2X and PLL_MIPI
arm64: dts: allwinner: h313: enable DVFS for Tanix TX1
arm64: dts: allwinner: a100: Add syscon nodes
dt-bindings: sram: sunxi-sram: Add A100 compatible
ARM: dts: suniv: f1c100s: Activate Audio Codec for Lichee Pi Nano
ARM: dts: suniv: f1c100s: Add support for Audio Codec
ARM: dts: suniv: f1c100s: Add support for DMA
Link: https://lore.kernel.org/r/Z36h2FwUxro8rouO@wens.tw
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux into soc/dt
MediaTek ARM64 DeviceTree updates for v6.14
This adds a few cleanups, enhances support for upstreamed SoCs
and machines, other than adding new ones.
In particular, fixes and improvements:
- MT8516 gets a few fixes for GICv2, Watchdog and I2C, and
support for the Keypad controller;
- MT8390 Genio 700 board gets basic audio support;
- MT8365 gets an alias for its integrated ethernet controller;
- MT8195 gets an important fix for system suspend: all of the
machines based on this SoC and its IoT variant can now
properly perform PM Suspend to RAM;
- MT8188 gets support for its Mali GPU with DVFS and a fix for
the OVL Hardware found in the Display Controller using the
right compatible strings;
- MT8186 Chromebooks can now suspend properly thanks to a fix
moving the USB wakeups from XHCI to MTU3 (USB) controller;
- MT8183 Chromebooks get a fix for their DMIC microphone and
proper support for their second-source touchscreen;
- MT7988 SoC and the BananaPi R4 board gets support for Pinctrl,
eMMC/SD, Thermal, CPU DVFS, PCI-Express, and peripherals like
the RT5190A PMIC, PCA9545 I2C mux, and others;
- MT7986 BananaPi R3 board gets support for SATA power socket;
And cleanups:
- Dropped regulator-compatible property from MediaTek DTs;
- Aligned thermal node names with bindings on MT8183 Kukui;
- MT6397 PMIC get proper sub-node names, fixing dt validation;
- The property enabling Wake-On-Lan feature changed in all of
the boards and driver to match the actual meaning of it
(mediatek,mac-wol now enables wol on mac instead of phy);
- Compatibles for MediaTek PMIC Keypad are added to bindings
and can now pass dts validation;
...and the newly added machines are:
- MT8188 (Ciri) Lenovo Chromebook Duet
- MT8186 (Starmie) ASUS Chromebook Enterprise CM30
- MT8186 (Chinchou) ASUS Chromebook CZ12 and CZ12 Flip
* tag 'mtk-dts64-for-v6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux: (71 commits)
arm64: dts: mediatek: mt8516: add keypad node
arm64: dts: mediatek: add per-SoC compatibles for keypad nodes
dt-bindings: mediatek,mt6779-keypad: add more compatibles
arm64: dts: mediatek: mt8365-evk: Set ethernet alias
dts: arm64: mediatek: mt8195: Remove MT8183 compatible for OVL
dts: arm64: mediatek: mt8188: Update OVL compatible from MT8183 to MT8195
dt-bindings: display: mediatek: ovl: Modify rules for MT8195/MT8188
dt-bindings: display: mediatek: ovl: Add compatible strings for MT8188 MDP3
dt-bindings: arm: mediatek: Drop MT8192 Chromebook variants that never shipped
arm64: dts: mediatek: mt8192: Drop Chromebook variants that never shipped
arm64: dts: mediatek: mt7988a-bpi-r4: Add proc-supply for cpus
arm64: dts: mediatek: mt7988a-bpi-r4: Add MediaTek MT6682A/RT5190A PMIC
arm64: dts: mediatek: mt7988a-bpi-r4: Enable pcie
arm64: dts: mediatek: mt7988a-bpi-r4: Enable pwm
arm64: dts: mediatek: mt7988a-bpi-r4: Enable ssusb1 on bpi-r4
arm64: dts: mediatek: mt7988a-bpi-r4: Enable t-phy for ssusb1
arm64: dts: mediatek: mt7988a-bpi-r4: Add PCA9545 I2C Mux
arm64: dts: mediatek: mt7988a-bpi-r4: Enable I2C controllers
arm64: dts: mediatek: mt7988a-bpi-r4: Add default UART stdout
arm64: dts: mediatek: mt7988a-bpi-r4: Enable serial0 debug uart
...
Link: https://lore.kernel.org/r/20250108100826.32458-1-angelogioacchino.delregno@collabora.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into soc/dt
Microchip AT91 device tree updates for v6.14
This update includes:
- power monitor support for the SAM9X75 Curiosity board (using the PAC1934
device)
- fix the VDDSDMMC rail to 3.3V to avoid breaking USB (for SAMA5D27 WLSOM1
EK and SAMA5D29 Curiosity boards)
- partial support for the SAMA7D65 SoC
- cleanups
* tag 'at91-dt-6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
ARM: dts: microchip: sam9x7: Add address/size to spi-controller nodes
ARM: dts: microchip: sam9x60: Add address/size to spi-controller nodes
ARM: dts: microchip: sama5d27_wlsom1_ek: Add no-1-8-v property to sdmmc0 node
ARM: dts: microchip: sama5d29_curiosity: Add no-1-8-v property to sdmmc0 node
ARM: dts: at91: Add sama7d65 pinmux
dt-bindings: atmel-sysreg: add sama7d65 RAM and PIT
dt-bindings: ARM: at91: Document Microchip SAMA7D65 Curiosity
ARM: dts: microchip: sam9x75_curiosity: Add power monitor support
ARM: dts: microchip: sam9x7: Move i2c address/size to dtsi
Link: https://lore.kernel.org/r/20250107081424.758980-2-claudiu.beznea@tuxon.dev
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt
Renesas DTS updates for v6.14 (take two)
- Add pin control support for the RZ/G3E SoC and the RZ/G3E SMARC
Carrier-II EVK development board,
- Add Image Signal Processor helper block (FCPVX and VSPX) support for
the R-Car V4H SoC,
- Describe odd C-PHY wiring on the White Hawk CSI/DSI sub-board,
- Miscellaneous fixes and improvements.
* tag 'renesas-dts-for-v6.14-tag2' of https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
arm64: dts: renesas: white-hawk-csi-dsi: Define CSI-2 data line orders
arm64: dts: renesas: r8a779g0: Add VSPX instances
arm64: dts: renesas: r8a779g0: Add FCPVX instances
arm64: dts: renesas: r9a09g047e57-smarc: Add SCIF pincontrol
arm64: dts: renesas: r9a09g047: Add pincontrol node
arm64: dts: renesas: r9a09g057h44-rzv2h-evk: Replace RZG2L macros
dt-bindings: pinctrl: renesas: Document RZ/G3E SoC
dt-bindings: pinctrl: renesas: Add alpha-numerical port support for RZ/V2H
Link: https://lore.kernel.org/r/cover.1736180859.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/pchotard/sti into soc/dt
Add and enable MALI400 support for STiH410-b2260
* tag 'sti-dt-for-v6.14-round1' of https://git.kernel.org/pub/scm/linux/kernel/git/pchotard/sti:
ARM: dts: st: enable the MALI gpu on the stih410-b2260
ARM: dts: st: add node for the MALI gpu on stih410.dtsi
dt-bindings: gpu: mali-utgard: Add st,stih410-mali compatible
Link: https://lore.kernel.org/r/f44cb1f0-4d91-4e25-8b1f-3dd9a7bed62b@foss.st.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt
i.MX dt-bindings change for 6.14:
- Add compatibles for i.MX8MP based SoM and carrier from ABB
* tag 'imx-bindings-6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
dt-bindings: arm: fsl: Add ABB SoM and carrier
Link: https://lore.kernel.org/r/20250105095139.714590-2-shawnguo2@yeah.net
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Add compatible strings for V853 family pinctrl.
Signed-off-by: Andras Szemzo <szemzo.andras@gmail.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/20250110123923.270626-3-szemzo.andras@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
The addition of DT bindings for enabling and tuning spread spectrum
clocking generation is available only for the main PLL of stm32f{4,7}
platforms.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250114182021.670435-3-dario.binacchi@amarulasolutions.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
The patch converts st,stm32-rcc.txt to the JSON schema, but it does more
than that. The old bindings, in fact, only covered the stm32f{4,7}
platforms and not the stm32h7. Therefore, to avoid patch submission tests
failing, it was necessary to add the corresponding compatible (i. e.
st,stm32h743-rcc) and specify that, in this case, 3 are the clocks instead
of the 2 required for the stm32f{4,7} platforms.
Additionally, the old bindings made no mention of the st,syscfg property,
which is used by both the stm32f{4,7} and the stm32h7 platforms.
The patch also fixes the files referencing to the old st,stm32-rcc.txt.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250114182021.670435-2-dario.binacchi@amarulasolutions.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/dt
Samsung DTS ARM64 changes for v6.14
1. Exynos8895: Add UART nodes, PMU (performance) for the M2 cluster and
I2C controllers in the camera block (HSI2C in CAM0-3).
2. Exynos990: Add Power Management Unit (Samsung block), PMU
(performance) for M5 cluster and two clock controllers.
3. ExynosAutov920: Add watchdog and DMA controllers.
4. Google GS101: Minor fixes for phy and USB. Add USB Type-C.
5. Exynos850-e850-96 board: Drop gap in memory layout.
6. New SoC: Exynos9810.
7. New boards, all mobile phones:
- Exynos9810:
Samsung Galaxy S9 (SM-G960F)
- Exynos990:
Samsung Galaxy S20 FE (SM-G780F)
Samsung Galaxy S20 5G (SM-G980F)
* tag 'samsung-dt64-6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: (23 commits)
arm64: dts: exynos8895: Add camera hsi2c nodes
arm64: dts: exynos990: Add clock management unit nodes
arm64: dts: exynos: gs101-oriole: add pd-disable and typec-power-opmode
arm64: dts: exynos: gs101-oriole: enable Maxim max77759 TCPCi
arm64: dts: exynos: Add initial support for Samsung Galaxy S9 (SM-G960F)
arm64: dts: exynos: Add Exynos9810 SoC support
arm64: dts: exynos850-e850-96: Specify reserved secure memory explicitly
arm64: dts: exynos990: Add a PMU node for the third cluster
arm64: dts: exynosautov920: Add DMA nodes
arm64: dts: exynos8895: Add a PMU node for the second cluster
dt-bindings: clock: samsung: Add Exynos990 SoC CMU bindings
arm64: dts: exynosautov920: add watchdog DT node
arm64: dts: exynos: Add initial support for Samsung Galaxy S20 (x1slte)
arm64: dts: exynos: Add initial support for Samsung Galaxy S20 5G (x1s)
arm64: dts: exynos: Add initial support for Samsung Galaxy S20 Series boards (x1s-common)
dt-bindings: arm: samsung: samsung-boards: Add bindings for SM-G981B and SM-G980F board
arm64: dts: exynos: gs101: allow stable USB phy Vbus detection
arm64: dts: exynos: gs101: phy region for exynos5-usbdrd is larger
MAINTAINERS: add myself and Tudor as reviewers for Google Tensor SoC
arm64: dts: exynos990: Add pmu and syscon-reboot nodes
...
Link: https://lore.kernel.org/r/20241231131742.134329-4-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ath/ath
ath.git patches for v6.14
This development cycle again featured multiple patchsets to ath12k to
support the new 802.11be MLO feature, this time including the device
grouping infrastructure, and the advertisement of MLO support to the
wireless core. However the MLO feature is still considered to be
incomplete.
In addition, there was the usual set of bug fixes and cleanups, mostly
in ath12k, but also in ath9k.
|
|
We are now using the on-chip PMU node for power sequencing to manage the
enable/disable functionality of Bluetooth. Consequently, the inputs
previously marked as required under the Bluetooth node can be removed.
For instance, the enable GPIO is now managed by the PMU node with the
property bt-enable-gpios.
Signed-off-by: Janaki Ramaiah Thota <quic_janathot@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Expand the firmware-name property to specify the names of NVM and
rampatch firmware to load. This update will support loading specific
firmware (nvm and rampatch) for certain chips, like the QCA6698
Bluetooth chip, which shares the same IP core as the WCN6855 but has
different RF components and RAM sizes, requiring new firmware files.
We might use different connectivity boards on the same platform. For
example, QCA6698-based boards can support either a two-antenna or
three-antenna solution, both of which work on the sa8775p-ride platform.
Due to differences in connectivity boards and variations in RF
performance from different foundries, different NVM configurations are
used based on the board ID.
So In firmware-name, if the NVM file has an extension, the NVM file will
be used. Otherwise, the system will first try the .bNN (board ID) file,
and if that fails, it will fall back to the .bin file.
Possible configurations:
firmware-name = "QCA6698/hpnv21.bin", "QCA6698/hpbtfw21.tlv";
firmware-name = "QCA6698/hpnv21", "QCA6698/hpbtfw21.tlv";
firmware-name = "QCA6698/hpnv21.bin";
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Cheng Jiang <quic_chejiang@quicinc.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
This compatible was only added to the list for compatibility with older
dtschema (<2024.02). Add it to the other list also so both new and old
tools work.
Fixes: 0d078d47cd3e ("dt-bindings: mfd: syscon: Add ti,j784s4-acspcie-proxy-ctrl compatible")
Signed-off-by: Andrew Davis <afd@ti.com>
Reviewed-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Romain Naour <romain.naour@smile.fr>
Link: https://lore.kernel.org/r/20250103174524.28768-2-afd@ti.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
This compatible seems to be missing the last 'e', looks to be a typo
when creating this file. Noticed this when diff'ing the two compatible
lists (which should stay in sync).
Fixes: f97b0435c857 ("dt-bindings: mfd: syscon: Split and enforce documenting MFD children")
Signed-off-by: Andrew Davis <afd@ti.com>
Reviewed-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250103174524.28768-4-afd@ti.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/drivers
Samsung SoC drivers for v6.14
1. Add new bindings for sysreg in Exynos8895.
2. Minor improvements in Exynos USI bindings.
3. Fix for Smatch warning in Exynos PMU syscon driver.
* tag 'samsung-drivers-6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
soc: samsung: exynos-pmu: Fix uninitialized ret in tensor_set_bits_atomic()
dt-bindings: soc: samsung: exynos-sysreg: add sysreg compatibles for exynos8895
dt-bindings: samsung: exynos-usi: Restrict possible samsung,mode values
Link: https://lore.kernel.org/r/20250112180846.64154-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers
Qualcomm driver updates for v6.14
The Qualcomm SCM drivers gains a number of fixes and improvements
related to race conditions during initialization. QSEECOM and the EFI
variable service therein is enabled for a few 8cx Gen 3 and X Elite
boards.
LLCC driver gains configuration for IPQ5424 and WRCACHE is enabled on X
Elite.
The BCM_TCS_CMD() macro is corrected and is cleaned up.
Support for SM7225 and X 1 Plus are added to the pd-mapper.
pmic_glink and the associated altmode driver are simplied using guards.
socinfo is added for QCS9075 and serial number readout on MSM8916
devices is corrected.
* tag 'qcom-drivers-for-6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (29 commits)
firmware: qcom: scm: add calls for wrapped key support
soc: qcom: pd_mapper: Add SM7225 compatible
dt-bindings: firmware: qcom,scm: Document ipq5424 SCM
soc: qcom: llcc: Update configuration data for IPQ5424
dt-bindings: cache: qcom,llcc: Add IPQ5424 compatible
firmware: qcom: scm: smc: Narrow 'mempool' variable scope
firmware: qcom: scm: smc: Handle missing SCM device
firmware: qcom: scm: Cleanup global '__scm' on probe failures
firmware: qcom: scm: Fix missing read barrier in qcom_scm_get_tzmem_pool()
firmware: qcom: scm: Fix missing read barrier in qcom_scm_is_available()
soc: qcom: socinfo: add QCS9075 SoC ID
dt-bindings: arm: qcom,ids: add SoC ID for QCS9075
soc: qcom: socinfo: Avoid out of bounds read of serial number
firmware: qcom: scm: Allow QSEECOM on Huawei Matebook E Go (sc8280xp)
firmware: qcom: scm: Allow QSEECOM for Windows Dev Kit 2023
firmware: qcom: scm: Allow QSEECOM for HP Omnibook X14
soc: qcom: rmtfs: constify rmtfs_class
soc: qcom: rmtfs: allow building the module with COMPILE_TEST=y
soc: qcom: pmic_glink_altmode: simplify locking with guard()
soc: qcom: Rework BCM_TCS_CMD macro
...
Link: https://lore.kernel.org/r/20250111172901.391774-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Add a dt-binding compatible for the Exynos990 PMU. It's compatible
with the Exynos7 PMU design. It handles system reboot, as well as
other system control registers (i.e registers for the USB PHY).
Signed-off-by: Igor Belwon <igor.belwon@mentallysanemainliners.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Link: https://lore.kernel.org/r/20241204145559.524932-2-igor.belwon@mentallysanemainliners.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20241231131742.134329-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The device full name is embedded trace extension. There is no good fit
in generic names list for the embedded trace extension. ETE is abbreviation
of embedded trace extension and the number is the CPU number that ete is
associated. Change the pattern of the node name as it won't affect any
device tree node as of now.
Signed-off-by: Mao Jinlong <quic_jinlmao@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20250107090031.3319-2-quic_jinlmao@quicinc.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Add compatible string "fsl,imx943-micfil" for i.MX943 platform.
The definition of register map and some register bit map is
different on the i.MX943 platform.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://patch.msgid.link/20250114102720.3664667-3-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
DTS example in the bindings should be indented with 2- or 4-spaces and
aligned with opening '- |', so correct any differences like 3-spaces or
mixtures 2- and 4-spaces in one binding.
No functional changes here, but saves some comments during reviews of
new patches built on existing code.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Manikandan Muralidharan <manikandan.m@microchip.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/20250107125836.225447-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into devel
pinctrl: renesas: Updates for v6.14 (take two)
- Add support for alpha-numerical port references on the RZ/V2H SoC,
- Add support for the RZ/G3E (R9A09G047) Soc.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux into i2c/for-mergewindow
at24 updates for v6.14-rc1
- add new compatibles for at24 variants from Giantec and Puya
Semiconductor (together with a new vendor prefix)
|
|
Add samsung,exynos8895-dw-mshc-smu specific compatible to the bindings
documentation. Since Samsung, as usual, likes reusing devices from older
designs, use the samsung,exynos7-dw-mshc-smu compatible.
Signed-off-by: Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/all/20250105161344.420749-2-ivo.ivanov.ivanov1@gmail.com/
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
There are two MQS instances on the i.MX943 platform.
The definition of bit positions in the control register are
different. In order to support these MQS modules, define
two compatible strings to distinguish them.
As one instance is in the always-on domain, another is in the
wakeup domain, so the compatible strings are
"fsl,imx943-aonmix-mqs", "fsl,imx943-wakeupmix-mqs".
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://patch.msgid.link/20250113090321.3193464-3-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This is for the MPC831{4,5}{,E} SoCs.
Signed-off-by: J. Neuschäfer <j.ne@posteo.net>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250102-mpc83xx-v1-11-86f78ba2a7af@posteo.net
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
From looking at the data sheets, it is not obvious that CS# and latch
clock can be treated at the same, but doing so works fine and saves the
hassle of (1) trying to specify a SPI device without CS, and (2) adding
another property to drive the latch clock[1].
[1]: https://lore.kernel.org/lkml/20241213-gpio74-v1-2-fa2c089caf41@posteo.net/
Signed-off-by: J. Neuschäfer <j.ne@posteo.net>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20241224-gpio74-v2-3-bbcf14183191@posteo.net
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
drm-next
Updates for v6.14
MDSS:
- properly described UBWC registers
- added SM6150 (aka QCS615) support
MDP4:
- several small fixes
DPU:
- added SM6150 (aka QCS615) support
- enabled wide planes if virtual planes are enabled (by using two SSPPs for a single plane)
- fixed modes filtering for platforms w/o 3DMux
- fixed DSPP DSPP_2 / _3 links on several platforms
- corrected DSPP definitions on SDM670
- added CWB hardware blocks support
- added VBIF to DPU snapshots
- dropped struct dpu_rm_requirements
DP:
- reworked DP audio support
DSI:
- added SM6150 (aka QCS615) support
GPU:
- Print GMU core fw version
- GMU bandwidth voting for a740 and a750
- Expose uche trap base via uapi
- UAPI error reporting
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGsutUu4ff6OpXNXxqf1xaV0rV6oV23VXNRiF0_OEfe72Q@mail.gmail.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc/IIO driver fixes from Greg KH:
"Here are a bunch of small IIO and interconnect and other driver fixes
to resolve reported issues. Included in here are:
- loads of iio driver fixes as a result of an audit of places where
uninitialized data would leak to userspace.
- other smaller, and normal, iio driver fixes.
- mhi driver fix
- interconnect driver fixes
- pci1xxxx driver fix
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-6.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (32 commits)
misc: microchip: pci1xxxx: Resolve return code mismatch during GPIO set config
misc: microchip: pci1xxxx: Resolve kernel panic during GPIO IRQ handling
interconnect: icc-clk: check return values of devm_kasprintf()
interconnect: qcom: icc-rpm: Set the count member before accessing the flex array
iio: adc: ti-ads1119: fix sample size in scan struct for triggered buffer
iio: temperature: tmp006: fix information leak in triggered buffer
iio: inkern: call iio_device_put() only on mapped devices
iio: adc: ad9467: Fix the "don't allow reading vref if not available" case
iio: adc: at91: call input_free_device() on allocated iio_dev
iio: adc: ad7173: fix using shared static info struct
iio: adc: ti-ads124s08: Use gpiod_set_value_cansleep()
iio: adc: ti-ads1119: fix information leak in triggered buffer
iio: pressure: zpa2326: fix information leak in triggered buffer
iio: adc: rockchip_saradc: fix information leak in triggered buffer
iio: imu: kmx61: fix information leak in triggered buffer
iio: light: vcnl4035: fix information leak in triggered buffer
iio: light: bh1745: fix information leak in triggered buffer
iio: adc: ti-ads8688: fix information leak in triggered buffer
iio: dummy: iio_simply_dummy_buffer: fix information leak in triggered buffer
iio: test: Fix GTS test config
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next
Marc Kleine-Budde says:
====================
pull-request: can-next 2025-01-10
Pierre-Henry Moussay adds PIC64GX compatibility to the DT bindings for
Microchip's mpfs-can IP core.
The next 3 patches are by Sean Nyekjaer and target the tcan4x5x
driver. First the DT bindings is converted to DT schema, then nWKRQ
voltage selection is added to the driver.
Dario Binacchi's patch for the sun4i_can makes the driver more
consistent by adding a likely() to the driver.
Another patch by Sean Nyekjaer for the tcan4x5x driver gets rid of a
false error message.
Charan Pedumuru converts the atmel-can DT bindings to DT schema.
The next 2 patches are by Oliver Hartkopp. The first one maps Oliver's
former mail addresses to a dedicated CAN mail address. The second one
assigns net/sched/em_canid.c additionally to the CAN maintainers.
Ariel Otilibili's patch removes dead code from the CAN dev helper.
The next 3 patches are by Sean Nyekjaer and add HW standby support to
the tcan4x5x driver.
A patch by Dario Binacchi fixes the DT bindings for the st,stm32-bxcan
driver.
The last 4 patches are by Jimmy Assarsson and target the kvaser_usb
and the kvaser_pciefd driver: error statistics are improved and
CAN_CTRLMODE_BERR_REPORTING is added.
* tag 'linux-can-next-for-6.14-20250110' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next:
can: kvaser_pciefd: Add support for CAN_CTRLMODE_BERR_REPORTING
can: kvaser_pciefd: Update stats and state even if alloc_can_err_skb() fails
can: kvaser_usb: Add support for CAN_CTRLMODE_BERR_REPORTING
can: kvaser_usb: Update stats and state even if alloc_can_err_skb() fails
dt-bindings: can: st,stm32-bxcan: fix st,gcan property type
can: m_can: call deinit/init callback when going into suspend/resume
can: tcan4x5x: add deinit callback to set standby mode
can: m_can: add deinit callback
can: dev: can_get_state_str(): Remove dead code
MAINTAINERS: assign em_canid.c additionally to CAN maintainers
mailmap: add an entry for Oliver Hartkopp
dt-bindings: net: can: atmel: Convert to json schema
can: tcan4x5x: get rid of false clock errors
can: sun4i_can: continue to use likely() to check skb
can: tcan4x5x: add option for selecting nWKRQ voltage
dt-bindings: can: tcan4x5x: Document the ti,nwkrq-voltage-vio option
dt-bindings: can: convert tcan4x5x.txt to DT schema
dt-bindings: can: mpfs: add PIC64GX CAN compatibility
====================
Link: https://patch.msgid.link/20250110112712.3214173-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pull drm fixes from Dave Airlie:
"Regular weekly fixes, this has the usual amdgpu/xe/i915 bits.
There is a bigger bunch of mediatek patches that I considered not
including at this stage, but all the changes (except for one were
obvious small fixes, and the rotation one is a few lines, and I
suppose will help someone have their screen up the right way), I
decided to include it since I expect it got slowed down by holidays
etc, and it's not that mainstream a hw platform.
i915:
- Revert "drm/i915/hdcp: Don't enable HDCP1.4 directly from
check_link"
amdgpu:
- Display interrupt fixes
- Fix display max surface mismatches
- Fix divide error in DM plane scale calcs
- Display divide by 0 checks in dml helpers
- SMU 13 AD/DC interrrupt handling fix
- Fix locking around buddy trim handling
amdkfd:
- Fix page fault with shader debugger enabled
- Fix eviction fence wq handling
xe:
- Avoid a NULL ptr deref when wedging
- Fix power gate sequence on DG1
mediatek:
- Revert "drm/mediatek: dsi: Correct calculation formula of PHY
Timing"
- Set private->all_drm_private[i]->drm to NULL if mtk_drm_bind
returns err
- Move mtk_crtc_finish_page_flip() to ddp_cmdq_cb()
- Only touch DISP_REG_OVL_PITCH_MSB if AFBC is supported
- Add support for 180-degree rotation in the display driver
- Stop selecting foreign drivers
- Revert "drm/mediatek: Switch to for_each_child_of_node_scoped()"
- Fix YCbCr422 color format issue for DP
- Fix mode valid issue for dp
- dp: Reference common DAI properties
- dsi: Add registers to pdata to fix MT8186/MT8188
- Remove unneeded semicolon
- Add return value check when reading DPCD
- Initialize pointer in mtk_drm_of_ddp_path_build_one()"
* tag 'drm-fixes-2025-01-11' of https://gitlab.freedesktop.org/drm/kernel: (26 commits)
drm/xe/dg1: Fix power gate sequence.
drm/xe: Fix tlb invalidation when wedging
Revert "drm/i915/hdcp: Don't enable HDCP1.4 directly from check_link"
drm/amdgpu: Add a lock when accessing the buddy trim function
drm/amd/pm: fix BUG: scheduling while atomic
drm/amdkfd: wq_release signals dma_fence only when available
drm/amd/display: Add check for granularity in dml ceil/floor helpers
drm/amdkfd: fixed page fault when enable MES shader debugger
drm/amd/display: fix divide error in DM plane scale calcs
drm/amd/display: increase MAX_SURFACES to the value supported by hw
drm/amd/display: fix page fault due to max surface definition mismatch
drm/amd/display: Remove unnecessary amdgpu_irq_get/put
drm/mediatek: Initialize pointer in mtk_drm_of_ddp_path_build_one()
drm/mediatek: Add return value check when reading DPCD
drm/mediatek: Remove unneeded semicolon
drm/mediatek: mtk_dsi: Add registers to pdata to fix MT8186/MT8188
dt-bindings: display: mediatek: dp: Reference common DAI properties
drm/mediatek: Fix mode valid issue for dp
drm/mediatek: Fix YCbCr422 color format issue for DP
Revert "drm/mediatek: Switch to for_each_child_of_node_scoped()"
...
|
|
Add TXT file extension so the format of binding will be explicit (we
have also bindins in YAML).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250107131111.246969-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
DTS example in the bindings should be indented with 2- or 4-spaces and
aligned with opening '- |', so correct any differences like 3-spaces or
mixtures 2- and 4-spaces in one binding.
No functional changes here, but saves some comments during reviews of
new patches built on existing code.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Andrew Jeffery <andrew@codeconstruct.com.au> # aspeed,ast2400-vic.yaml
Acked-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20250107131108.246898-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
DTS example in the bindings should be indented with 2- or 4-spaces and
aligned with opening '- |', so correct any differences like 3-spaces or
mixtures 2- and 4-spaces in one binding.
No functional changes here, but saves some comments during reviews of
new patches built on existing code.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> # msm
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> # renesas
Link: https://lore.kernel.org/r/20250107125854.227233-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
The SRAM memory shared pointed to by the st,gcan property is unique, so
we don't need an array of phandles.
Fixes: e43250c0ac81 ("dt-bindings: net: can: add STM32 bxcan DT bindings")
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20241228150043.3926696-1-dario.binacchi@amarulasolutions.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/chunkuang.hu/linux into drm-fixes
Mediatek DRM Fixes - 20250104
1. Revert "drm/mediatek: dsi: Correct calculation formula of PHY Timing"
2. Set private->all_drm_private[i]->drm to NULL if mtk_drm_bind returns err
3. Move mtk_crtc_finish_page_flip() to ddp_cmdq_cb()
4. Only touch DISP_REG_OVL_PITCH_MSB if AFBC is supported
5. Add support for 180-degree rotation in the display driver
6. Stop selecting foreign drivers
7. Revert "drm/mediatek: Switch to for_each_child_of_node_scoped()"
8. Fix YCbCr422 color format issue for DP
9. Fix mode valid issue for dp
10. dp: Reference common DAI properties
11. dsi: Add registers to pdata to fix MT8186/MT8188
12. Remove unneeded semicolon
13. Add return value check when reading DPCD
14. Initialize pointer in mtk_drm_of_ddp_path_build_one()
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250104124227.45505-1-chunkuang.hu@kernel.org
|
|
This backmerges Linux 6.13-rc6 this is need for the newer pulls.
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
Cross-merge networking fixes after downstream PR (net-6.13-rc7).
Conflicts:
a42d71e322a8 ("net_sched: sch_cake: Add drop reasons")
737d4d91d35b ("sched: sch_cake: add bounds checks to host bulk flow fairness counts")
Adjacent changes:
drivers/net/ethernet/meta/fbnic/fbnic.h
3a856ab34726 ("eth: fbnic: add IRQ reuse support")
95978931d55f ("eth: fbnic: Revert "eth: fbnic: Add hardware monitoring support via HWMON interface"")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Document board compatible bindings.
Signed-off-by: Shimrra Shai <shimrrashai@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20241216214152.58387-2-shimrrashai@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
The A100, similar to the H6 and H616, use an NVMEM value to determine
speed binnings. The method used is similar to that of the H6. However,
the information is stored at a slightly different bit offset.
Add a new compatible for the A100.
Signed-off-by: Cody Eksal <masterr3c0rd@epochal.quest>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Link: https://lore.kernel.org/r/20241031070232.1793078-12-masterr3c0rd@epochal.quest
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Add devicetree binding for the Xunlong Orange Pi 5 Max board.
The Orange Pi 5 Max is a single board computer powered by the Rockchip
RK3588 similar to the Orange Pi 5 Plus.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jimmy Hon <honyuenkwun@gmail.com>
Link: https://lore.kernel.org/r/20250109051619.1825-3-honyuenkwun@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
All Qualcomm firmwares uploaded to linux-firmware are in MBN format,
instead of split MDT. No functional changes, just correct the DTS
example so people will not rely on unaccepted files.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Alex Elder <elder@kernel.org>
Link: https://patch.msgid.link/20250108120242.156201-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
