summaryrefslogtreecommitdiff
path: root/Documentation/devicetree
AgeCommit message (Collapse)Author
2022-01-12Merge tag 'tty-5.17-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial driver updates from Greg KH: "Here is the big set of tty/serial driver updates for 5.17-rc1. Nothing major in here, just lots of good updates and fixes, including: - more tty core cleanups from Jiri as well as mxser driver cleanups. This is the majority of the core diffstat - tty documentation updates from Jiri - platform_get_irq() updates - various serial driver updates for new features and hardware - fifo usage for 8250 console, reducing cpu load a lot - LED fix for keyboards, long-time bugfix that went through many revisions - minor cleanups All have been in linux-next for a while with no reported problems" * tag 'tty-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (119 commits) serial: core: Keep mctrl register state and cached copy in sync serial: stm32: correct loop for dma error handling serial: stm32: fix flow control transfer in DMA mode serial: stm32: rework TX DMA state condition serial: stm32: move tx dma terminate DMA to shutdown serial: pl011: Drop redundant DTR/RTS preservation on close/open serial: pl011: Drop CR register reset on set_termios serial: pl010: Drop CR register reset on set_termios serial: liteuart: fix MODULE_ALIAS serial: 8250_bcm7271: Fix return error code in case of dma_alloc_coherent() failure Revert "serdev: BREAK/FRAME/PARITY/OVERRUN notification prototype V2" tty: goldfish: Use platform_get_irq() to get the interrupt serdev: BREAK/FRAME/PARITY/OVERRUN notification prototype V2 tty: serial: meson: Drop the legacy compatible strings and clock code serial: pmac_zilog: Use platform_get_irq() to get the interrupt serial: bcm63xx: Use platform_get_irq() to get the interrupt serial: ar933x: Use platform_get_irq() to get the interrupt serial: vt8500: Use platform_get_irq() to get the interrupt serial: altera_jtaguart: Use platform_get_irq_optional() to get the interrupt serial: pxa: Use platform_get_irq() to get the interrupt ...
2022-01-12Merge tag 'pinctrl-v5.17-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control bulk updates from Linus Walleij: "Core changes: - New standard enumerator and corresponding device tree bindings for output impedance pin configuration. (Implemented and used in the Renesas rzg2l driver.) - Cleanup of Kconfig and Makefile to be somewhat orderly and alphabetic. New drivers: - Samsung Exynos 7885 pin controller. - Ocelot LAN966x pin controller. - Qualcomm SDX65 pin controller. - Qualcomm SM8450 pin controller. - Qualcomm PM8019, PM8226 and PM2250 pin controllers. - NXP/Freescale i.MXRT1050 pin controller. - Intel Thunder Bay pin controller. Enhancements: - Introduction of the string library helper function "kasprintf_strarray()" and subsequent use in Rockchip, ST and Armada pin control drivers, as well as the GPIO mockup driver. - The Ocelot pin controller has been extensively rewritten to use regmap and other modern kernel infrastructure. - The Microchip SGPIO driver has been converted to use regmap. - The SPEAr driver had been converted to use regmap. - Substantial cleanups and janitorial on the Apple pin control driver that was merged for v5.16. - Janitorial to remove of_node assignments in the GPIO portions that anyway get this handled in the GPIO core. - Minor cleanups and improvements in several pin controllers" * tag 'pinctrl-v5.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (98 commits) pinctrl: imx: fix assigning groups names dt-bindings: pinctrl: mt8195: add wrapping node of pin configurations pinctrl: bcm: ns: use generic groups & functions helpers pinctrl: imx: fix allocation result check pinctrl: samsung: Use platform_get_irq_optional() to get the interrupt pinctrl: Propagate firmware node from a parent device dt-bindings: pinctrl: qcom: Add SDX65 pinctrl bindings pinctrl: add one more "const" for generic function groups pinctrl: keembay: rework loops looking for groups names pinctrl: keembay: comment process of building functions a bit pinctrl: imx: prepare for making "group_names" in "function_desc" const ARM: dts: gpio-ranges property is now required pinctrl: aspeed: fix unmet dependencies on MFD_SYSCON for PINCTRL_ASPEED pinctrl: Get rid of duplicate of_node assignment in the drivers pinctrl-sunxi: don't call pinctrl_gpio_direction() pinctrl-bcm2835: don't call pinctrl_gpio_direction() pinctrl: bcm2835: Silence uninit warning pinctrl: Sort Kconfig and Makefile entries alphabetically pinctrl: Add Intel Thunder Bay pinctrl driver dt-bindings: pinctrl: Add bindings for Intel Thunderbay pinctrl driver ...
2022-01-12dt-bindings: leds: Replace moonlight with indicator in mt6360 exampleChiYuan Huang
Replace moonlight with indicator in mt6360 example to prevent the below build error: Error: Documentation/devicetree/bindings/leds/leds-mt6360.example.dts:114.24-25 syntax error FATAL ERROR: Unable to parse input tree make[1]: *** [scripts/Makefile.lib:385: Documentation/devicetree/bindings/leds/leds-mt6360.example.dt.yaml] Error 1 Link: https://lore.kernel.org/lkml/CAL_JsqJRMVE163LaHTbtFARc4f_qg33bfQx+sD3ukce_xQF+gA@mail.gmail.com/ Signed-off-by: ChiYuan Huang <cy_huang@richtek.com> Reviewed-by: Gene Chen <gene_chen@richtek.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Pavel Machek <pavel@ucw.cz>
2022-01-12dt-bindings: net: oxnas-dwmac: Add bindings for OX810SENeil Armstrong
Add SoC specific bindings for OX810SE support. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-01-12Merge branch 'dt/linus' into dt/nextRob Herring
Pick a fix which didn't make it into v5.16.
2022-01-12dt-bindings: net: mdio: Drop resets/reset-names child propertiesRob Herring
resets/reset-names are device specific and don't belong in the MDIO bus schema. For example, it doesn't match what is defined for the "qca,ar9331-switch" binding which defines "reset-names" to be "switch" rather than "phy". Neither name is that useful IMO. Other child properties are also device specific, but those won't conflict with device schemas. Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220111170248.3160841-1-robh@kernel.org
2022-01-11dt-bindings: mailbox: apple,mailbox: Add generic and t6000 compatiblesHector Martin
Much as we've done with other blocks, let's introduce generic compatibles so drivers can bind to those and still work with future SoCs, as long as the hardware remains the same. Also go ahead and add compatibles for the new t600x SoCs (we group those as t6000). Note that no DTs instantiate devices with this binding yet. Reviewed-by: Mark Kettenis <kettenis@openbsd.org> Signed-off-by: Hector Martin <marcan@marcan.st> Reviewed-by: Sven Peter <sven@svenpeter.dev> Reviewed-by: Sven Peter <sven@svenpeter.dev> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2022-01-11Merge branches 'clk-ingenic' and 'clk-mediatek' into clk-nextStephen Boyd
- Add MDMA and BDMA clks to Ingenic JZ4760 and JZ4770 - MediaTek mt7986 SoC basic support * clk-ingenic: clk: ingenic: Add MDMA and BDMA clocks dt-bindings: clk/ingenic: Add MDMA and BDMA clocks * clk-mediatek: clk: mediatek: add mt7986 clock support clk: mediatek: add mt7986 clock IDs dt-bindings: clock: mediatek: document clk bindings for mediatek mt7986 SoC clk: mediatek: clk-gate: Use regmap_{set/clear}_bits helpers clk: mediatek: clk-gate: Shrink by adding clockgating bit check helper
2022-01-11Merge branches 'clk-socfpga', 'clk-toshiba', 'clk-st' and 'clk-bitmain' into ↵Stephen Boyd
clk-next - Clock and reset driver for Toshiba Visconti SoCs * clk-socfpga: clk: socfpga: s10: Make use of the helper function devm_platform_ioremap_resource() clk: socfpga: agilex: Make use of the helper function devm_platform_ioremap_resource() clk: socfpga: remove redundant assignment after a mask operation clk: socfpga: remove redundant assignment on division * clk-toshiba: clk: visconti: Remove pointless NULL check in visconti_pll_add_lookup() MAINTAINERS: Add entries for Toshiba Visconti PLL and clock controller clk: visconti: Add support common clock driver and reset driver dt-bindings: clock: Add DT bindings for SMU of Toshiba Visconti TMPV770x SoC dt-bindings: clock: Add DT bindings for PLL of Toshiba Visconti TMPV770x SoC * clk-st: clk: Drop unused COMMON_CLK_STM32MP157_SCMI config clk: st: clkgen-mux: search reg within node or parent clk: st: clkgen-fsyn: search reg within node or parent * clk-bitmain: clk: bm1880: remove kfrees on static allocations
2022-01-11Merge branches 'clk-nvidia', 'clk-imx', 'clk-samsung' and 'clk-qcom' into ↵Stephen Boyd
clk-next * clk-nvidia: clk: tegra: Support runtime PM and power domain clk: tegra: Make vde a child of pll_p on tegra114 * clk-imx: clk: imx8mp: Fix the parent clk of the audio_root_clk clk: imx8mp: Remove IPG_AUDIO_ROOT from imx8mp-clock.h clk: imx8mn: Fix imx8mn_clko1_sels clk: imx: Use div64_ul instead of do_div clk: imx: imx8ulp: set suppress_bind_attrs to true * clk-samsung: clk: samsung: Add initial Exynos7885 clock driver clk: samsung: clk-pll: Add support for pll1417x clk: samsung: Make exynos850_register_cmu shared dt-bindings: clock: Document Exynos7885 CMU bindings dt-bindings: clock: Add bindings definitions for Exynos7885 CMU clk: samsung: exynos850: Add missing sysreg clocks dt-bindings: clock: Add bindings for Exynos850 sysreg clocks clk: samsung: exynos850: Register clocks early clk: samsung: exynos850: Keep some crucial clocks running clk: samsung: exynos850: Implement CMU_CMGP domain dt-bindings: clock: Add bindings for Exynos850 CMU_CMGP clk: samsung: exynos850: Implement CMU_APM domain dt-bindings: clock: Add bindings for Exynos850 CMU_APM clk: samsung: Update CPU clk registration clk: samsung: Remove meaningless __init and extern from header files clk: samsung: remove __clk_lookup() usage dt-bindings: clock: samsung: add IDs for some core clocks * clk-qcom: (25 commits) clk: qcom: gcc-sc7280: Mark gcc_cfg_noc_lpass_clk always enabled clk: qcom: clk-alpha-pll: Increase PLL lock detect poll time clk: qcom: turingcc-qcs404: explicitly include clk-provider.h clk: qcom: q6sstop-qcs404: explicitly include clk-provider.h clk: qcom: mmcc-apq8084: explicitly include clk-provider.h clk: qcom: lpasscc-sdm845: explicitly include clk-provider.h clk: qcom: lpasscc-sc7280: explicitly include clk-provider.h clk: qcom: gcc-sm6350: explicitly include clk-provider.h clk: qcom: gcc-msm8994: explicitly include clk-provider.h clk: qcom: gcc-sm8350: explicitly include clk-provider.h clk: qcom: Add MSM8976/56 Global Clock Controller (GCC) driver dt-bindings: clk: qcom: Document MSM8976 Global Clock Controller clk: qcom: Add clock driver for SM8450 clk: qcom: Add SDX65 GCC support clk: qcom: Add LUCID_EVO PLL type for SDX65 dt-bindings: clock: Add SM8450 GCC clock bindings dt-bindings: clock: Add SDX65 GCC clock bindings clk: qcom: rpmh: add support for SM8450 rpmh clocks dt-bindings: clock: Add RPMHCC bindings for SM8450 clk: qcom: smd-rpm: Drop binary value handling for buffered clock ...
2022-01-11Merge branches 'clk-x86', 'clk-stm', 'clk-amlogic' and 'clk-allwinner' into ↵Stephen Boyd
clk-next * clk-x86: clk: x86: Fix clk_gate_flags for RV_CLK_GATE clk: x86: Use dynamic con_id string during clk registration ACPI: APD: Add a fmw property clk-name drivers: acpi: acpi_apd: Remove unused device property "is-rv" x86: clk: clk-fch: Add support for newer family of AMD's SOC clk: Introduce clk-tps68470 driver platform/x86: int3472: Deal with probe ordering issues platform/x86: int3472: Pass tps68470_regulator_platform_data to the tps68470-regulator MFD-cell platform/x86: int3472: Pass tps68470_clk_platform_data to the tps68470-regulator MFD-cell platform/x86: int3472: Add get_sensor_adev_and_name() helper platform/x86: int3472: Split into 2 drivers platform_data: Add linux/platform_data/tps68470.h file i2c: acpi: Add i2c_acpi_new_device_by_fwnode() function i2c: acpi: Use acpi_dev_ready_for_enumeration() helper ACPI: delay enumeration of devices with a _DEP pointing to an INT3472 device * clk-stm: clk: stm32: Fix ltdc's clock turn off by clk_disable_unused() after system enter shell * clk-amlogic: clk: meson: gxbb: Fix the SDM_EN bit for MPLL0 on GXBB * clk-allwinner: clk: sunxi-ng: Add support for the D1 SoC clocks clk: sunxi-ng: gate: Add macros for gates with fixed dividers clk: sunxi-ng: mux: Add macros using clk_parent_data and clk_hw clk: sunxi-ng: mp: Add macros using clk_parent_data and clk_hw clk: sunxi-ng: div: Add macros using clk_parent_data and clk_hw dt-bindings: clk: Add compatibles for D1 CCUs clk: sunxi-ng: Allow the CCU core to be built as a module clk: sunxi-ng: Convert early providers to platform drivers clk: sunxi-ng: Allow drivers to be built as modules clk: sunxi-ng: Export symbols used by CCU drivers
2022-01-11Merge branches 'clk-doc', 'clk-renesas', 'clk-at91', 'clk-cleanup' and ↵Stephen Boyd
'clk-debugfs' into clk-next * clk-doc: clk: Gemini: fix struct name in kernel-doc clk: zynq: pll: Fix kernel-doc warnings clk: imx: pllv1: fix kernel-doc notation for struct clk_pllv1 * clk-renesas: (31 commits) clk: renesas: r9a07g044: Add GPU clock and reset entries clk: renesas: r9a07g044: Add mux and divider for G clock clk: renesas: r9a07g044: Rename CLK_PLL3_DIV4 macro clk: renesas: cpg-mssr: Add support for R-Car S4-8 clk: renesas: rcar-gen4: Introduce R-Car Gen4 CPG driver dt-bindings: clock: Add r8a779f0 CPG Core Clock Definitions dt-bindings: power: Add r8a779f0 SYSC power domain definitions clk: renesas: r9a07g044: Add TSU clock and reset entry mmc: renesas_sdhi: Simplify an expression mmc: renesas_sdhi: Use devm_clk_get_optional() to obtain CD clock dt-bindings: clock: renesas,cpg-mssr: Document r8a779f0 clk: renesas: cpg-mssr: propagate return value of_genpd_add_provider_simple() clk: renesas: cpg-mssr: Check return value of pm_genpd_init() clk: renesas: rzg2l: propagate return value of_genpd_add_provider_simple() clk: renesas: rzg2l: Check return value of pm_genpd_init() clk: renesas: r9a07g044: Add RSPI clock and reset entries clk: renesas: r9a07g044: Change core clock "I" from DEF_FIXED->DEF_DIV clk: renesas: rzg2l: Add CPG_PL1_DDIV macro mmc: renesas_sdhi: Parse DT for SDnH mmc: renesas_sdhi: Use dev_err_probe when getting clock fails ... * clk-at91: clk: lan966x: Extend lan966x clock driver for clock gating support dt-bindings: clock: lan966x: Extend includes with clock gates dt-bindings: clock: lan966x: Extend for clock gate support clk: gate: Add devm_clk_hw_register_gate() clk: lan966x: Add lan966x SoC clock driver dt-bindings: clock: lan966x: Add LAN966X Clock Controller dt-bindings: clock: lan966x: Add binding includes for lan966x SoC clock IDs * clk-cleanup: clk: stm32mp1: remove redundant assignment to pointer data clk: __clk_core_init() never takes NULL clk: clk_core_get() can also return NULL clk/ti/adpll: Make const pointer error a static const array * clk-debugfs: clk: Enable/Disable runtime PM for clk_summary clk: Emit a stern warning with writable debugfs enabled clk: Add write operation for clk_parent debugfs node
2022-01-11Merge tag 'gpio-updates-for-v5.17' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux Pull gpio updates from Bartosz Golaszewski: "The gpio-sim module is back, this time without any changes to configfs. This results in a less elegant user-space interface but I never got any follow-up on the committable items and didn't want to delay this module for several more months. Other than that we have support for several new models and some support going away. We started working on converting GPIO drivers to using fwnode exclusively in order to limit references to OF symbols to gpiolib-of.c exclusively. We also have regular tweaks and improvements all over the place. Summary: - new testing module: gpio-sim that is scheduled to replace gpio-mockup - initial changes aiming at converting all GPIO drivers to using the fwnode interface and limiting any references to OF symbols to gpiolib-of.c - add support for Tegra234 and Tegra241 to gpio-tegra186 - add support for new models (SSD201 and SSD202D) to gpio-msc313 - add basic support for interrupts to gpio-aggregator - add support for AMDIF031 HID device to gpio-amdpt - drop support for unused platforms in gpio-xlp - cleanup leftovers from the removal of the legacy Samsung Exynos GPIO driver - use raw spinlocks in gpio-aspeed and gpio-aspeed-sgpio to make PREEMPT_RT happy - generalize the common 'ngpios' device property by reading it in the core gpiolib code so that we can remove duplicate reads from drivers - allow line names from device properties to override names set by drivers - code shrink in gpiod_add_lookup_table() - add new model to the DT bindings for gpio-vf610 - convert DT bindings for tegra devices to YAML - improvements to interrupt handling in gpio-rcar and gpio-rockchip - updates to intel drivers from Andy (details in the merge commit) - some minor tweaks, improvements and coding-style fixes all around the subsystem" * tag 'gpio-updates-for-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (59 commits) gpio: rcar: Propagate errors from devm_request_irq() gpio: rcar: Use platform_get_irq() to get the interrupt gpio: ts5500: Use platform_get_irq() to get the interrupt gpio: dwapb: Switch to use fwnode instead of of_node gpiolib: acpi: make fwnode take precedence in struct gpio_chip dt-bindings: gpio: samsung: drop unused bindings gpio: max3191x: Use bitmap_free() to free bitmap gpio: regmap: Switch to use fwnode instead of of_node gpio: tegra186: Add support for Tegra241 dt-bindings: gpio: Add Tegra241 support gpio: brcmstb: Use local variable to access OF node gpio: Remove unused local OF node pointers gpio: sim: add missing fwnode_handle_put() in gpio_sim_probe() gpio: msc313: Add support for SSD201 and SSD202D gpio: msc313: Code clean ups dt-bindings: gpio: msc313: Add offsets for ssd20xd dt-bindings: gpio: msc313: Add compatible for ssd20xd gpio: sim: fix uninitialized ret variable gpio: Propagate firmware node from a parent device gpio: Setup parent device and get rid of unnecessary of_node assignment ...
2022-01-11Merge tag 'mmc-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmcLinus Torvalds
Pull MMC updates from Ulf Hansson: "MMC core: - Use common polling loop for CMD1 - Add support for DT compatibles for card quirks and use it for ti,wl1251 - Fixup storing of the OCR mask for MMC_QUIRK_NONSTD_SDIO MMC host: - dw_mmc: Add support for MMC_GEN_CMDs - dw_mmc: Fixup calculation of the data timeout - dw_mmc-exynos: Add support for the ARTPEC-8 variant - jz4740: Add support for bi-directional DMA channels - mmci: Add support for eMMC HS200 mode for the stm32 sdmmc variant - mmci: Add support for stm32 sdmmc variant revision v2.2 - mtk-sd: A couple of various minor improvements - omap_hsmmc: Drop redundant initialization for the ti,wl1251 chip - sdhci-esdhc-imx: Add support for the i.MXRT series variant - sdhci-esdhc-imx: Add Haibo Chen as maintainer - sdhci-pci: Add support for the Intel ADL variant - sdhci-pci-gli: GL975[50]: Add support for the Apple ARM64 variant - sdhci-pci-o2micro: Improve support for SDR104/HS200" * tag 'mmc-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (54 commits) dt-bindings: mmc: synopsys-dw-mshc: integrate Altera and Imagination mmc: pwrseq: Use bitmap_free() to free bitmap dt-bindings: mmc: PL18x stop relying on order of dma-names dt-bindings: mmc: sdhci-msm: Add compatible string for msm8994 mmc: au1xmmc: propagate errors from platform_get_irq() mmc: sdhci-pci-o2micro: Restore the SD clock's base clock frequency mmc: sdhci-pci-o2micro: Improve card input timing at SDR104/HS200 mode mmc: mtk-sd: Assign src_clk parent to src_clk_cg for legacy DTs mmc: mtk-sd: Fix usage of devm_clk_get_optional() mmc: mtk-sd: Take action for no-sdio device-tree parameter mmc: mtk-sd: Use BIT() and GENMASK() macros to describe fields mmc: mtk-sd: Use readl_poll_timeout instead of open-coded polling MAINTAINERS: Add i.MX sdhci maintainer mmc: jz4740: Support using a bi-directional DMA channel dt-bindings: mmc: ingenic: Support using bi-directional DMA channel mmc: dw_mmc: Do not wait for DTO in case of error mmc: dw_mmc: Add driver callbacks for data read timeout mmc: dw_mmc-exynos: Add support for ARTPEC-8 dt-bindings: mmc: exynos-dw-mshc: Add support for ARTPEC-8 mmc: meson-mx-sdio: add IRQ check ...
2022-01-11Merge tag 'mfd-next-5.17' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: "New Device Support: - Add support for Lakefield PCH to Intel LPSS PCI Remove Device Support: - Remove support for ROHM BD70528 Power Management IC New Functionality: - Add support for SMBus and I2C mode to Dialog DA9062/61 PMIC - Enable I2C4 on Microsoft Surface Go & Go 2 Fix-ups: - Device Tree changes (inc. YAML conversion); maxim,max77686, rohm,bd9571mwv, syscon, brcm,twd, google,cros-ec - Use __maybe_unused instead of #ifery; atmel-flexcom - Allow the Regmap API to handle endianess internally; ntxec - Utilise I2C's .resume_noirq call-back; atmel-flexcom - Remove unused code; ti_am335x_tscadc - Use CPU-id instead of ACPI _HRV to ID variants; intel_soc_pmic_core - Allow device to power-off right from .probe(); tps65910 - Trivial (whitespace, typos, etc); da9063 Bug Fixes: - Fix ordering issues during probe; intel-lpss-acpi - Fix correct clock speed; intel-lpss-pci" * tag 'mfd-next-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (25 commits) mfd: google,cros-ec: Fix property name for MediaTek rpmsg dt-bindings: mfd: Fix typo "DA9093" -> "DA9063" mfd: ntxec: Change return type of ntxec_reg8 from __be16 to u16 mfd: tps65910: Set PWR_OFF bit during driver probe mfd: intel_soc_pmic: Use CPU-id check instead of _HRV check to differentiate variants mfd: intel-lpss: Fix I2C4 not being available on the Microsoft Surface Go & Go 2 dt-bindings: mfd: Add Broadcom's Timer-Watchdog block dt-bindings: mfd: Add Freecom system controller mfd: Kconfig: Change INTEL_SOC_PMIC_CHTDC_TI to bool dt-bindings: mfd: syscon: Add samsung,exynos850-sysreg mfd: da9062: Support SMBus and I2C mode mfd: intel-lpss-pci: Fix clock speed for 38a8 UART mfd: intel-lpss: Fix too early PM enablement in the ACPI ->probe() mfd: ti_am335x_tscadc: Drop the CNTRLREG_TSC_8WIRE macro mfd: stmpe: Support disabling sub-functions mfd: atmel-flexcom: Use .resume_noirq mfd: atmel-flexcom: Remove #ifdef CONFIG_PM_SLEEP dt-bindings: mfd: bd9571mwv: Convert to json-schema mfd: intel-lpss: Add Intel Lakefield PCH PCI IDs dt-bindings: mfd: maxim,max77686: Convert to dtschema ...
2022-01-11Merge tag 'spi-v5.17' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi updates from Mark Brown: "This has mostly been a quiet release for the SPI subsystem, almost all cleanups and fixes to existing drivers. A couple of changes that stand out: - Cleanups and support for version specific features in the DesignWare controller. - Removal of support for Netlogic devices from the XLP driver, the platform had previously been removed by MIPS so the support couldn't be used. - Conversion of several DT bindings to YAML format" * tag 'spi-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (53 commits) spi: don't include ptp_clock_kernel.h in spi.h spi: spi-meson-spifc: Add missing pm_runtime_disable() in meson_spifc_probe spi: atmel: Fix typo spi: dt-bindings: mediatek,spi-mtk-nor: Fix example 'interrupts' property spi: qcom: geni: handle timeout for gpi mode spi: qcom: geni: set the error code for gpi transfer spi: spi-mux: Add reference to spi-peripheral-props.yaml schema spi: ar934x: fix transfer size spi: pxa2xx: Propagate firmware node spi: dw: Propagate firmware node spi: dln2: Propagate firmware node spi: ar934x: fix transfer and word delays spi: uniphier: Fix a bug that doesn't point to private data correctly spi: spi-mtk-nor: add new clock name 'axi' for spi nor spi: atmel,quadspi: Define sama7g5 QSPI spi: atmel,quadspi: Convert to json-schema spi: Fix incorrect cs_setup delay handling dt-bindings: mtd: spi-nor: Add a reference to spi-peripheral-props.yaml spi: dt-bindings: cdns,qspi-nor: Move peripheral-specific properties out spi: dt-bindings: add schema listing peripheral-specific properties ...
2022-01-11Merge tag 'regulator-v5.17' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Pull regulator updates from Mark Brown: "This has been a fairly quiet release for the regulator API, the main thing has been the addition of helpers for interrupt handling from Matti Vaittinen. We do also have support for quite a few new devices. Summary: - Helpers for trivial interrupt notifications, making it easier for drivers to handle error interrupts. - Support for Dialog DA914x, Maxim MAX2008x, Qualcomm PM8826, PMG1100, and PM8450 and TI TPS68470" * tag 'regulator-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (30 commits) regulator: Add MAX20086-MAX20089 driver dt-bindings: regulators: Add bindings for Maxim MAX20086-MAX20089 regulator: qcom_smd: Align probe function with rpmh-regulator regulator: remove redundant ret variable regulator: qcom-labibb: OCP interrupts are not a failure while disabled regulator: dt-bindings: samsung,s5m8767: Move fixed string BUCK9 to 'properties' regulator: Introduce tps68470-regulator driver drivers/regulator: remove redundant ret variable regulator: fix bullet lists of regulator_ops comment regulator: Fix type of regulator-coupled-max-spread property regulator: maxim,max8973: Document interrupts property regulator: qcom-rpmh: Add support for PM8450 regulators regulator: qcom,rpmh: Add compatible for PM8450 regulator: da9121: Add DA914x binding info regulator: da9121: Remove erroneous compatible from binding regulator: da9121: Add DA914x support regulator: da9121: Prevent current limit change when enabled regulator: qcom-rpmh: Add PMG1110 regulators dt-bindings: regulator: Add compatible for pmg1110 regulator: qcom_spmi: Add pm8226 regulators ...
2022-01-11Merge tag 'mtd/for-5.17' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux Pull MTD updates from Miquel Raynal: "MTD core changes: - mtdchar: Prevent unbounded allocation in MEMWRITE ioctl - gen_probe: Use bitmap_zalloc() when applicable - Introduce an expert mode for forensics and debugging purposes - Clear out unregistered devices a bit more - Provide unique name for nvmem device - Remove unused header file <linux/mtd/latch-addr-flash.h> - Fixed breaking list in __mtd_del_partition. MTD device changes: - Warn about failure to unregister mtd device in sst25l, mchp48l640, mchp23k256, and dataflash drivers. Raw NAND core changes: - Export nand_read_page_hwecc_oob_first() GPMC memory controller for OMAP2 NAND controller changes: - Add support for AM64 SoC and allow build on K3 platforms - Use a compatible match table when checking for NAND controller - Use platform_get_irq() to get the interrupt Raw NAND controller changes: - OMAP2 NAND controller: - Document the missing 'rb-gpios' DT property - Drop unused variable - Fix force_8bit flag behaviour for DMA mode - Move to exec_op interface - Use platform_get_irq() to get the interrupt - Renesas: - Add new NAND controller driver with its bindings and MAINTAINERS entry - Onenand: - Remove redundant variable ooblen - MPC5121: - Remove unused variable in ads5121_select_chip() - GPMI: - Add ERR007117 protection for nfc_apply_timings - Remove explicit default gpmi clock setting for i.MX6 - Use platform_get_irq_byname() to get the interrupt - Remove unneeded variable - Ingenic: - JZ4740 needs 'oob_first' read page function - Davinci: - Rewrite function description - Avoid duplicated page read - Don't calculate ECC when reading page SPI NOR core changes: - Add Pratyush as SPI NOR co-maintainer. - Flash parameters initialization was done in a spaghetti way. Clean flash parameters initialization. - Rework the flash_info flags and clarify where one should be used. - Initialize all flash parameters based on JESD216 SFDP where possible. Flash parameters and settings that are SFDP discoverable should not be duplicated via flash_info flags at flash declaration. - Remove debugfs entries that duplicate sysfs entries. SPI NOR manufacturer driver changes: - Use late_init() hook in various drivers to make it clear that those flash parameters are either not declared in the JESD216 SFDP standard, or the SFDP tables which define those flash parameters are not defined by the flash. - Fix mtd size for s3an flashes. - Write 2 bytes when disabling Octal DTR mode: 1 byte long transactions are not allowed in 8D-8D-8D mode. Hyperbus changes: - Couple of fixes in Renesas hyperbus rpc-if driver to avoid crash on module remove and for missing check for error value in probe" * tag 'mtd/for-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (71 commits) mtd: spi-nor: Remove debugfs entries that duplicate sysfs entries mtd: spi-nor: micron-st: write 2 bytes when disabling Octal DTR mode mtd: spi-nor: spansion: write 2 bytes when disabling Octal DTR mode mtd: spi-nor: core: use 2 data bytes for template ops mtd: spi-nor: Constify part specific fixup hooks mtd: spi-nor: core: Remove reference to spi-nor.c mtd: rawnand: gpmi: Use platform_get_irq_byname() to get the interrupt mtd: rawnand: omap_elm: Use platform_get_irq() to get the interrupt mtd: rawnand: omap2: Select GPMC device driver for ARCH_K3 memory: omap-gpmc: Use a compatible match table when checking for NAND controller memory: omap-gpmc: Add support for GPMC on AM64 SoC dt-bindings: memory-controllers: ti,gpmc: Add compatible for AM64 memory: omap-gpmc: Use platform_get_irq() to get the interrupt MAINTAINERS: Add an entry for Renesas NAND controller mtd: rawnand: renesas: Add new NAND controller driver dt-bindings: mtd: renesas: Describe Renesas R-Car Gen3 & RZ/N1 NAND controller mtd: rawnand: gpmi: remove unneeded variable mtd: rawnand: omap2: drop unused variable mtd: rawnand: omap2: fix force_8bit flag behaviour for DMA mode mtd: rawnand: omap2: Add compatible for AM64 SoC ...
2022-01-11Merge tag 'for-v5.17' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply Pull power supply and reset updates from Sebastian Reichel: "Power-supply core: - introduce "No Battery" health status - use library interpolation - add power_supply_battery_info documentation - migrate power_supply_battery_info to be fully heap allocated making it more obvious that it needs to be free'd manually Drivers: - max77976-charger: new driver - qcom-smbb: add pm8226 charger support - bq25890-charger: support battery temperature readings - ab8500: continue migrating towards using standard core APIs" * tag 'for-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (28 commits) power: supply_core: Pass pointer to battery info power: supply: ab8500: Fix the error handling path of ab8500_charger_probe() power: reset: mt6397: Check for null res pointer power: bq25890: add POWER_SUPPLY_PROP_TEMP power: supply: qcom_smbb: support pm8226 dt-bindings: power: supply: pm8941-charger: add pm8226 power: supply: ab8500: Standardize capacity lookup power: supply: ab8500: Standardize temp res lookup power: supply: ab8500: Standardize CV voltage power: supply: ab8500: Standardize CC current power: supply: ab8500: Make recharge capacity a constant power: supply: ab8500: Standardize termination current power: supply: ab8500: Standardize internal resistance power: supply: ab8500_fg: Init battery data in bind() power: supply: ab8500: Standardize voltages power: supply: ab8500: Standardize technology power: supply: ab8500: Standardize design capacity power: supply: ab8500: Use only one battery type power: supply: ab8500: Drop unused battery types power: supply: ab8500: Standardize operating temperature ...
2022-01-11Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid Pull HID updates from Jiri Kosina: "Highlights: - support for USI style pens (Tero Kristo, Mika Westerberg) - quirk for devices that need inverted X/Y axes (Alistair Francis) - small core code cleanups and deduplication (Benjamin Tissoires) - Apple Magic Keyboard support improvements (José Expósito, Alex Henrie, Benjamin Berg) - locking performance improvement for hidraw code (André Almeida) - PM wakeup support for i2c-hid driver (Matthias Kaehlcke - new driver to support for LetSketch device (Hans de Goede) - proper batter reporting for hid-magicmouse USB-connected devices (José Expósito)" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (32 commits) HID: magicmouse: Fix an error handling path in magicmouse_probe() HID: address kernel-doc warnings HID: intel-ish-hid: ishtp-fw-loader: Fix a kernel-doc formatting issue HID: intel-ish-hid: ipc: Specify no cache snooping on TGL and ADL HID: hid-uclogic-params: Invalid parameter check in uclogic_params_frame_init_v1_buttonpad HID: hid-uclogic-params: Invalid parameter check in uclogic_params_huion_init HID: hid-uclogic-params: Invalid parameter check in uclogic_params_get_str_desc HID: hid-uclogic-params: Invalid parameter check in uclogic_params_init HID: Add new Letsketch tablet driver HID: apple: Add Magic Keyboard 2021 with fingerprint reader FN key mapping HID: apple: Add 2021 magic keyboard FN key mapping HID: magicmouse: set Magic Trackpad 2021 name HID: magicmouse: set device name when it has been personalized HID: apple: Add 2021 Magic Keyboard with number pad HID: apple: Add 2021 Magic Keyboard with fingerprint reader HID: i2c-hid-of: Expose the touchscreen-inverted properties HID: quirks: Allow inverting the absolute X/Y values HID: hidraw: Replace hidraw device table mutex with a rwsem HID: thrustmaster use swap() to make code cleaner HID: debug: Add USI usages ...
2022-01-11Merge tag 'hwmon-for-v5.17' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon updates from Guenter Roeck: "New drivers: - PMBus driver for MPS Multi-phase mp5023 - PMBus driver for Delta AHE-50DC fan control module - Driver for NZXT RGB&Fan Controller/Smart Device v2 - Driver for Texas Instruments INA238 - Driver to support X370 Asus WMI - Driver to support B550 Asus WMI Other notable changes: - Cleanup of ntc_thermistor driver, and added support for Samsung 1404-001221 NTC - Improve detection of LM84, MAX1617, and MAX1617A in adm1021 driver - Clean up tmp401 driver, and convert to with_info API - Add support for regulators and IR38060, IR38164 IR38263 to ir38064 PMBus driver - Add support for AMD Family 19h Models 10h-1Fh and A0h-AFh to k10temp driver - Add support for F81966 to f71882fg driver - Add support for ONSEMI N34TS04 to jc42 driver - Clean up and simplify dell-smm driver - Add support for ROG STRIX B550-A/X570-I GAMING to nct6775 driver And various other minor improvements and fixes" * tag 'hwmon-for-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (49 commits) hwmon: (nzxt-smart2) make array detect_fans_report static const hwmon: (xgene-hwmon) Add free before exiting xgene_hwmon_probe hwmon: (nzxt-smart2) Fix "unused function" warning hwmon: (dell-smm) Pack the whole smm_regs struct hwmon: (nct6775) Additional check for ChipID before ASUS WMI usage hwmon: (mr75203) fix wrong power-up delay value hwmon/pmbus: (ir38064) Fix spelling mistake "comaptible" -> "compatible" hwmon/pmbus: (ir38064) Expose a regulator hwmon/pmbus: (ir38064) Add of_match_table hwmon/pmbus: (ir38064) Add support for IR38060, IR38164 IR38263 hwmon: add driver for NZXT RGB&Fan Controller/Smart Device v2. hwmon: (nct6775) add ROG STRIX B550-A/X570-I GAMING hwmon: (pmbus) Add support for MPS Multi-phase mp5023 dt-bindings: add Delta AHE-50DC fan control module hwmon: (pmbus) Add Delta AHE-50DC fan control module driver hwmon: prefix kernel-doc comments for structs with struct hwmon: (ntc_thermistor) Add Samsung 1404-001221 NTC hwmon: (ntc_thermistor) Drop OF dependency hwmon: (dell-smm) Unify i8k_ioctl() and i8k_ioctl_unlocked() hwmon: (dell-smm) Simplify ioctl handler ...
2022-01-11dt-bindings: clock: samsung: convert S5Pv210 to dtschemaKrzysztof Kozlowski
Convert Samsung S5Pv210 SoC clock controller bindings to DT schema format. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220102115356.75796-8-krzysztof.kozlowski@canonical.com
2022-01-11dt-bindings: clock: samsung: convert Exynos5410 to dtschemaKrzysztof Kozlowski
Convert Samsung Exynos5410 SoC clock controller bindings to DT schema format. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220102115356.75796-7-krzysztof.kozlowski@canonical.com
2022-01-11dt-bindings: clock: samsung: convert Exynos5260 to dtschemaKrzysztof Kozlowski
Convert Samsung Exynos5260 SoC clock controller bindings to DT schema format. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220102115356.75796-6-krzysztof.kozlowski@canonical.com
2022-01-11dt-bindings: clock: samsung: extend Exynos7 bindings with UFSKrzysztof Kozlowski
The UFS for Exynos7 SoC clock controller requires additional input clocks for the FSYS1 clock controller. Update the bindings to reflect this, at least in theory. In practice, these input clocks are ignored, so it is rather adjusting of bindings to existing DTS, without affecting any real users. I understand that is not how it should be done, though... Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220102115356.75796-5-krzysztof.kozlowski@canonical.com
2022-01-11dt-bindings: clock: samsung: convert Exynos7 to dtschemaKrzysztof Kozlowski
Convert Samsung Exynos7 SoC clock controller bindings to DT schema format. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220102115356.75796-4-krzysztof.kozlowski@canonical.com
2022-01-11dt-bindings: clock: samsung: convert Exynos5433 to dtschemaKrzysztof Kozlowski
Convert Samsung Exynos5433 SoC clock controller bindings to DT schema format. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220102115356.75796-3-krzysztof.kozlowski@canonical.com
2022-01-11dt-bindings: i2c: maxim,max96712: Add bindings for Maxim Integrated MAX96712Niklas Söderlund
Add bindings for Maxim Integrated MAX96712 deserializer. The MAX96712 deserializer converts GMSL2 or GMSL1 serial inputs into MIPI CSI-2 D-PHY or C-PHY formatted outputs. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20211230123354.623876-1-niklas.soderlund+renesas@ragnatech.se
2022-01-11dt-bindings: iio: adi,ltc2983: Fix 64-bit property sizesRob Herring
The '/bits/ 64' notation applies the next <> list of values. Another <> list is encoded as 32-bits by default. IOW, each <> list needs to be preceeded with '/bits/ 64'. While the dts format allows this, as a rule we don't mix sizes for DT properties since all size information is lost in the dtb file. Signed-off-by: Rob Herring <robh@kernel.org> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Nuno Sá <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20220107032026.2408196-1-robh@kernel.org
2022-01-11dt-bindings: power: maxim,max17040: Fix incorrect type for 'maxim,rcomp'Rob Herring
The 'maxim,rcomp' is defined as a uint32, but the description and users all say it is uint8-array with 1 or 2 elements. The tools missed checking this case. Signed-off-by: Rob Herring <robh@kernel.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Link: https://lore.kernel.org/r/20220107030433.2381616-1-robh@kernel.org
2022-01-11dt-bindings: interrupt-controller: arm,gic-v3: Fix 'interrupts' cell size in ↵Rob Herring
example The 2nd example has an interrupts cells size of 4, but the 'interrupts' property has 3 cells. The example should also be separate since the cell size differs in each example. Signed-off-by: Rob Herring <robh@kernel.org> Acked-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20220106182518.1435497-5-robh@kernel.org
2022-01-11dt-bindings: iio/magnetometer: yamaha,yas530: Fix invalid 'interrupts' in ↵Rob Herring
example 'interrupts' does not take a phandle, so remove it in the example. Signed-off-by: Rob Herring <robh@kernel.org> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20220106182518.1435497-4-robh@kernel.org
2022-01-11dt-bindings: clock: imx5: Drop clock consumer node from exampleRob Herring
The example nodes have different sized interrupt cells which is not valid given no interrupt-parent is specified. As provider examples don't need to show the consumer side in the first place, just drop the consumer node. Signed-off-by: Rob Herring <robh@kernel.org> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Link: https://lore.kernel.org/r/20220106182518.1435497-1-robh@kernel.org
2022-01-11dt-bindings: Drop required 'interrupt-parent'Rob Herring
'interrupt-parent' is never required as it can be in a parent node or a parent node itself can be an interrupt provider. Where exactly it lives is outside the scope of a binding schema. Signed-off-by: Rob Herring <robh@kernel.org> Acked-by: Lee Jones <lee.jones@linaro.org> Acked-by: Bartosz Golaszewski <brgl@bgdev.pl> Link: https://lore.kernel.org/r/20220107031905.2406176-1-robh@kernel.org
2022-01-11dt-bindings: net: ti,dp83869: Drop value on boolean 'ti,max-output-impedance'Rob Herring
DT booleans don't have a value and 'ti,max-output-impedance' is defined and used as a boolean. So drop the bogus value in the example. Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220107030513.2385482-1-robh@kernel.org
2022-01-11dt-bindings: net: wireless: mt76: Fix 8-bit property sizesRob Herring
The '/bits/ 8' notation applies the next <> list of values. Another <> list is encoded as 32-bits by default. IOW, each <> list needs to be preceeded with '/bits/ 8'. While the dts format allows this, as a rule we don't mix sizes for DT properties since all size information is lost in the dtb file. Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220107030419.2380198-1-robh@kernel.org
2022-01-11dt-bindings: PCI: snps,dw-pcie-ep: Drop conflicting 'max-functions' schemaRob Herring
'max-functions' is already defined in pci-ep.yaml schema as a uint8 and all users of it expect an uint8. Drop the conflicting schema. Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220107030358.2378221-1-robh@kernel.org
2022-01-11dt-bindings: i2c: st,stm32-i2c: Make each example a separate entryRob Herring
Each independent example should be a separate entry. This allows for 'interrupts' to have different cell sizes. Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220106183037.1443931-1-robh@kernel.org
2022-01-11dt-bindings: net: stm32-dwmac: Make each example a separate entryRob Herring
Each independent example should be a separate entry. This allows for 'interrupts' to have different cell sizes. The first example also has a phandle in 'interrupts', so drop the phandle. Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220106182518.1435497-8-robh@kernel.org
2022-01-11dt-bindings: net: Cleanup MDIO node schemasRob Herring
The schemas for MDIO bus nodes range from missing to duplicating everything in mdio.yaml. The MDIO bus node schemas only need to reference mdio.yaml, define any binding specific properties, and define 'unevaluatedProperties: false'. This ensures that MDIO nodes only contain defined properties. With this, any duplicated properties can be removed. Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Maxime Ripard <mripard@kernel.org> Cc: Chen-Yu Tsai <wens@csie.org> Cc: Vivien Didelot <vivien.didelot@gmail.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Vladimir Oltean <olteanv@gmail.com> Cc: Joakim Zhang <qiangqing.zhang@nxp.com> Cc: Heiner Kallweit <hkallweit1@gmail.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Cc: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp> Cc: Cristian Ciocaltea <cristian.ciocaltea@gmail.com> Cc: "Fernández Rojas" <noltari@gmail.com> Cc: John Crispin <john@phrozen.org> Cc: "G. Jaya Kumaran" <vineetha.g.jaya.kumaran@intel.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Joel Stanley <joel@jms.id.au> Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com> Cc: Oleksij Rempel <o.rempel@pengutronix.de> Cc: Alexandre Torgue <alexandre.torgue@foss.st.com> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Jose Abreu <joabreu@synopsys.com> Cc: netdev@vger.kernel.org Signed-off-by: Rob Herring <robh@kernel.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20220105151009.3093506-1-robh@kernel.org
2022-01-11dt-bindings: PCI: Add compatible string for Brcmstb 74[23]5 MIPs SOCsJim Quinlan
The Broadcom STB Arm and MIPs SOCs use the same PCIe controller HW, although the MIPs version is older. Signed-off-by: Jim Quinlan <jim2101024@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2022-01-10Merge tag 'thermal-5.17-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull thermal control updates from Rafael Wysocki: "These add a new driver for Renesas RZ/G2L TSU, update a few existing thermal control drivers and clean up the tmon utility. Specifics: - Add new TSU driver and DT bindings for the Renesas RZ/G2L platform (Biju Das). - Fix missing check when calling reset_control_deassert() in the rz2gl thermal driver (Biju Das). - In preparation for FORTIFY_SOURCE performing compile-time and run-time field bounds checking for memcpy(), avoid intentionally writing across neighboring fields in the int340x thermal control driver (Kees Cook). - Fix RFIM mailbox write commands handling in the int340x thermal control driver (Sumeet Pawnikar). - Fix PM issue occurring in the iMX thermal control driver during suspend/resume by implementing PM runtime support in it (Oleksij Rempel). - Add 'const' annotation to thermal_cooling_ops in the Intel powerclamp driver (Rikard Falkeborn). - Fix missing ADC bit set in the iMX8MP thermal driver to enable the sensor (Paul Gerber). - Drop unused local variable definition from tmon (ran jianping)" * tag 'thermal-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: thermal/drivers/int340x: Fix RFIM mailbox write commands thermal/drivers/rz2gl: Add error check for reset_control_deassert() thermal/drivers/imx8mm: Enable ADC when enabling monitor thermal/drivers: Add TSU driver for RZ/G2L dt-bindings: thermal: Document Renesas RZ/G2L TSU thermal/drivers/intel_powerclamp: Constify static thermal_cooling_device_ops thermal/drivers/imx: Implement runtime PM support thermal: tools: tmon: remove unneeded local variable thermal: int340x: Use struct_group() for memcpy() region
2022-01-10Merge tag '5.17-net-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core ---- - Defer freeing TCP skbs to the BH handler, whenever possible, or at least perform the freeing outside of the socket lock section to decrease cross-CPU allocator work and improve latency. - Add netdevice refcount tracking to locate sources of netdevice and net namespace refcount leaks. - Make Tx watchdog less intrusive - avoid pausing Tx and restarting all queues from a single CPU removing latency spikes. - Various small optimizations throughout the stack from Eric Dumazet. - Make netdev->dev_addr[] constant, force modifications to go via appropriate helpers to allow us to keep addresses in ordered data structures. - Replace unix_table_lock with per-hash locks, improving performance of bind() calls. - Extend skb drop tracepoint with a drop reason. - Allow SO_MARK and SO_PRIORITY setsockopt under CAP_NET_RAW. BPF --- - New helpers: - bpf_find_vma(), find and inspect VMAs for profiling use cases - bpf_loop(), runtime-bounded loop helper trading some execution time for much faster (if at all converging) verification - bpf_strncmp(), improve performance, avoid compiler flakiness - bpf_get_func_arg(), bpf_get_func_ret(), bpf_get_func_arg_cnt() for tracing programs, all inlined by the verifier - Support BPF relocations (CO-RE) in the kernel loader. - Further the support for BTF_TYPE_TAG annotations. - Allow access to local storage in sleepable helpers. - Convert verifier argument types to a composable form with different attributes which can be shared across types (ro, maybe-null). - Prepare libbpf for upcoming v1.0 release by cleaning up APIs, creating new, extensible ones where missing and deprecating those to be removed. Protocols --------- - WiFi (mac80211/cfg80211): - notify user space about long "come back in N" AP responses, allow it to react to such temporary rejections - allow non-standard VHT MCS 10/11 rates - use coarse time in airtime fairness code to save CPU cycles - Bluetooth: - rework of HCI command execution serialization to use a common queue and work struct, and improve handling errors reported in the middle of a batch of commands - rework HCI event handling to use skb_pull_data, avoiding packet parsing pitfalls - support AOSP Bluetooth Quality Report - SMC: - support net namespaces, following the RDMA model - improve connection establishment latency by pre-clearing buffers - introduce TCP ULP for automatic redirection to SMC - Multi-Path TCP: - support ioctls: SIOCINQ, OUTQ, and OUTQNSD - support socket options: IP_TOS, IP_FREEBIND, IP_TRANSPARENT, IPV6_FREEBIND, and IPV6_TRANSPARENT, TCP_CORK and TCP_NODELAY - support cmsgs: TCP_INQ - improvements in the data scheduler (assigning data to subflows) - support fastclose option (quick shutdown of the full MPTCP connection, similar to TCP RST in regular TCP) - MCTP (Management Component Transport) over serial, as defined by DMTF spec DSP0253 - "MCTP Serial Transport Binding". Driver API ---------- - Support timestamping on bond interfaces in active/passive mode. - Introduce generic phylink link mode validation for drivers which don't have any quirks and where MAC capability bits fully express what's supported. Allow PCS layer to participate in the validation. Convert a number of drivers. - Add support to set/get size of buffers on the Rx rings and size of the tx copybreak buffer via ethtool. - Support offloading TC actions as first-class citizens rather than only as attributes of filters, improve sharing and device resource utilization. - WiFi (mac80211/cfg80211): - support forwarding offload (ndo_fill_forward_path) - support for background radar detection hardware - SA Query Procedures offload on the AP side New hardware / drivers ---------------------- - tsnep - FPGA based TSN endpoint Ethernet MAC used in PLCs with real-time requirements for isochronous communication with protocols like OPC UA Pub/Sub. - Qualcomm BAM-DMUX WWAN - driver for data channels of modems integrated into many older Qualcomm SoCs, e.g. MSM8916 or MSM8974 (qcom_bam_dmux). - Microchip LAN966x multi-port Gigabit AVB/TSN Ethernet Switch driver with support for bridging, VLANs and multicast forwarding (lan966x). - iwlmei driver for co-operating between Intel's WiFi driver and Intel's Active Management Technology (AMT) devices. - mse102x - Vertexcom MSE102x Homeplug GreenPHY chips - Bluetooth: - MediaTek MT7921 SDIO devices - Foxconn MT7922A - Realtek RTL8852AE Drivers ------- - Significantly improve performance in the datapaths of: lan78xx, ax88179_178a, lantiq_xrx200, bnxt. - Intel Ethernet NICs: - igb: support PTP/time PEROUT and EXTTS SDP functions on 82580/i354/i350 adapters - ixgbevf: new PF -> VF mailbox API which avoids the risk of mailbox corruption with ESXi - iavf: support configuration of VLAN features of finer granularity, stacked tags and filtering - ice: PTP support for new E822 devices with sub-ns precision - ice: support firmware activation without reboot - Mellanox Ethernet NICs (mlx5): - expose control over IRQ coalescing mode (CQE vs EQE) via ethtool - support TC forwarding when tunnel encap and decap happen between two ports of the same NIC - dynamically size and allow disabling various features to save resources for running in embedded / SmartNIC scenarios - Broadcom Ethernet NICs (bnxt): - use page frag allocator to improve Rx performance - expose control over IRQ coalescing mode (CQE vs EQE) via ethtool - Other Ethernet NICs: - amd-xgbe: add Ryzen 6000 (Yellow Carp) Ethernet support - Microsoft cloud/virtual NIC (mana): - add XDP support (PASS, DROP, TX) - Mellanox Ethernet switches (mlxsw): - initial support for Spectrum-4 ASICs - VxLAN with IPv6 underlay - Marvell Ethernet switches (prestera): - support flower flow templates - add basic IP forwarding support - NXP embedded Ethernet switches (ocelot & felix): - support Per-Stream Filtering and Policing (PSFP) - enable cut-through forwarding between ports by default - support FDMA to improve packet Rx/Tx to CPU - Other embedded switches: - hellcreek: improve trapping management (STP and PTP) packets - qca8k: support link aggregation and port mirroring - Qualcomm 802.11ax WiFi (ath11k): - qca6390, wcn6855: enable 802.11 power save mode in station mode - BSS color change support - WCN6855 hw2.1 support - 11d scan offload support - scan MAC address randomization support - full monitor mode, only supported on QCN9074 - qca6390/wcn6855: report signal and tx bitrate - qca6390: rfkill support - qca6390/wcn6855: regdb.bin support - Intel WiFi (iwlwifi): - support SAR GEO Offset Mapping (SGOM) and Time-Aware-SAR (TAS) in cooperation with the BIOS - support for Optimized Connectivity Experience (OCE) scan - support firmware API version 68 - lots of preparatory work for the upcoming Bz device family - MediaTek WiFi (mt76): - Specific Absorption Rate (SAR) support - mt7921: 160 MHz channel support - RealTek WiFi (rtw88): - Specific Absorption Rate (SAR) support - scan offload - Other WiFi NICs - ath10k: support fetching (pre-)calibration data from nvmem - brcmfmac: configure keep-alive packet on suspend - wcn36xx: beacon filter support" * tag '5.17-net-next' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2048 commits) tcp: tcp_send_challenge_ack delete useless param `skb` net/qla3xxx: Remove useless DMA-32 fallback configuration rocker: Remove useless DMA-32 fallback configuration hinic: Remove useless DMA-32 fallback configuration lan743x: Remove useless DMA-32 fallback configuration net: enetc: Remove useless DMA-32 fallback configuration cxgb4vf: Remove useless DMA-32 fallback configuration cxgb4: Remove useless DMA-32 fallback configuration cxgb3: Remove useless DMA-32 fallback configuration bnx2x: Remove useless DMA-32 fallback configuration et131x: Remove useless DMA-32 fallback configuration be2net: Remove useless DMA-32 fallback configuration vmxnet3: Remove useless DMA-32 fallback configuration bna: Simplify DMA setting net: alteon: Simplify DMA setting myri10ge: Simplify DMA setting qlcnic: Simplify DMA setting net: allwinner: Fix print format page_pool: remove spinlock in page_pool_refill_alloc_cache() amt: fix wrong return type of amt_send_membership_update() ...
2022-01-10Merge tag 'media/v5.17-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: - New sensor driver: ov5693 - A new driver for STM32 Chrom-ART Accelerator - Added V4L2 core helper functions for VP9 codec - Hantro driver has gained support for VP9 codecs - Added support for Maxim MAX96712 Quad GMSL2 Deserializer - The staging atomisp driver has gained lots of improvements, fixes and cleanups. It now works with userptr - Lots of random driver improvements as usual * tag 'media/v5.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (397 commits) media: ipu3-cio2: Add support for instantiating i2c-clients for VCMs media: ipu3-cio2: Call cio2_bridge_init() before anything else media: ipu3-cio2: Defer probing until the PMIC is fully setup media: hantro: Add support for Allwinner H6 media: dt-bindings: allwinner: document H6 Hantro G2 binding media: hantro: Convert imx8m_vpu_g2_irq to helper media: hantro: move postproc enablement for old cores media: hantro: vp9: add support for legacy register set media: hantro: vp9: use double buffering if needed media: hantro: add support for reset lines media: hantro: Fix probe func error path media: i2c: hi846: use pm_runtime_force_suspend/resume for system suspend media: i2c: hi846: check return value of regulator_bulk_disable() media: hi556: Support device probe in non-zero ACPI D state media: ov5675: Support device probe in non-zero ACPI D state media: imx208: Support device probe in non-zero ACPI D state media: ov2740: support device probe in non-zero ACPI D state media: ov5670: Support device probe in non-zero ACPI D state media: ov8856: support device probe in non-zero ACPI D state media: ov8865: Disable only enabled regulators on error path ...
2022-01-10Merge tag 'drm-next-2022-01-07' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull drm updates from Dave Airlie: "Highlights are support for privacy screens found in new laptops, a bunch of nomodeset refactoring, and i915 enables ADL-P systems by default, while starting to add RPL-S support. vmwgfx adds GEM and support for OpenGL 4.3 features in userspace. Lots of internal refactorings around dma reservations, and lots of driver refactoring as well. Summary: core: - add privacy screen support - move nomodeset option into drm subsystem - clean up nomodeset handling in drivers - make drm_irq.c legacy - fix stack_depot name conflicts - remove DMA_BUF_SET_NAME ioctl restrictions - sysfs: send hotplug event - replace several DRM_* logging macros with drm_* - move hashtable to legacy code - add error return from gem_create_object - cma-helper: improve interfaces, drop CONFIG_DRM_KMS_CMA_HELPER - kernel.h related include cleanups - support XRGB2101010 source buffers ttm: - don't include drm hashtable - stop pruning fences after wait - documentation updates dma-buf: - add dma_resv selftest - add debugfs helpers - remove dma_resv_get_excl_unlocked - documentation - make fences mandatory in dma_resv_add_excl_fence dp: - add link training delay helpers gem: - link shmem/cma helpers into separate modules - use dma_resv iteratior - import dma-buf namespace into gem helper modules scheduler: - fence grab fix - lockdep fixes bridge: - switch to managed MIPI DSI helpers - register and attach during probe fixes - convert to YAML in several places. panel: - add bunch of new panesl simpledrm: - support FB_DAMAGE_CLIPS - support virtual screen sizes - add Apple M1 support amdgpu: - enable seamless boot for DCN 3.01 - runtime PM fixes - use drm_kms_helper_connector_hotplug_event - get all fences at once - use generic drm fb helpers - PSR/DPCD/LTTPR/DSC/PM/RAS/OLED/SRIOV fixes - add smart trace buffer (STB) for supported GPUs - display debugfs entries - new SMU debug option - Documentation update amdkfd: - IP discovery enumeration refactor - interface between driver fixes - SVM fixes - kfd uapi header to define some sysfs bitfields. i915: - support VESA panel backlights - enable ADL-P by default - add eDP privacy screen support - add Raptor Lake S (RPL-S) support - DG2 page table support - lots of GuC/HuC fw refactoring - refactored i915->gt interfaces - CD clock squashing support - enable 10-bit gamma support - update ADL-P DMC fw to v2.14 - enable runtime PM autosuspend by default - ADL-P DSI support - per-lane DP drive settings for ICL+ - add support for pipe C/D DMC firmware - Atomic gamma LUT updates - remove CCS FB stride restrictions on ADL-P - VRR platform support for display 11 - add support for display audio codec keepalive - lots of display refactoring - fix runtime PM handling during PXP suspend - improved eviction performance with async TTM moves - async VMA unbinding improvements - VMA locking refactoring - improved error capture robustness - use per device iommu checks - drop bits stealing from i915_sw_fence function ptr - remove dma_resv_prune - add IC cache invalidation on DG2 nouveau: - crc fixes - validate LUTs in atomic check - set HDMI AVI RGB quant to full tegra: - buffer objects reworks for dma-buf compat - NVDEC driver uAPI support - power management improvements etnaviv: - IOMMU enabled system support - fix > 4GB command buffer mapping - close a DoS vector - fix spurious GPU resets ast: - fix i2c initialization rcar-du: - DSI output support exynos: - replace legacy gpio interface - implement generic GEM object mmap msm: - dpu plane state cleanup in prep for multirect - dpu debugfs cleanups - dp support for sc7280 - a506 support - removal of struct_mutex - remove old eDP sub-driver anx7625: - support MIPI DSI input - support HDMI audio - fix reading EDID lvds: - fix bridge DT bindings megachips: - probe both bridges before registering dw-hdmi: - allow interlace on bridge ps8640: - enable runtime PM - support aux-bus tx358768: - enable reference clock - add pulse mode support ti-sn65dsi86: - use regmap bulk write - add PWM support etnaviv: - get all fences at once gma500: - gem object cleanups kmb: - enable fb console radeon: - use dma_resv_wait_timeout rockchip: - add DSP hold timeout - suspend/resume fixes - PLL clock fixes - implement mmap in GEM object functions - use generic fbdev emulation sun4i: - use CMA helpers without vmap support vc4: - fix HDMI-CEC hang with display is off - power on HDMI controller while disabling - support 4K@60Hz modes - support 10-bit YUV 4:2:0 output vmwgfx: - fix leak on probe errors - fail probing on broken hosts - new placement for MOB page tables - hide internal BOs from userspace - implement GEM support - implement GL 4.3 support virtio: - overflow fixes xen: - implement mmap as GEM object function omapdrm: - fix scatterlist export - support virtual planes mediatek: - MT8192 support - CMDQ refinement" * tag 'drm-next-2022-01-07' of git://anongit.freedesktop.org/drm/drm: (1241 commits) drm/amdgpu: no DC support for headless chips drm/amd/display: fix dereference before NULL check drm/amdgpu: always reset the asic in suspend (v2) drm/amdgpu: put SMU into proper state on runpm suspending for BOCO capable platform drm/amd/display: Fix the uninitialized variable in enable_stream_features() drm/amdgpu: fix runpm documentation amdgpu/pm: Make sysfs pm attributes as read-only for VFs drm/amdgpu: save error count in RAS poison handler drm/amdgpu: drop redundant semicolon drm/amd/display: get and restore link res map drm/amd/display: support dynamic HPO DP link encoder allocation drm/amd/display: access hpo dp link encoder only through link resource drm/amd/display: populate link res in both detection and validation drm/amd/display: define link res and make it accessible to all link interfaces drm/amd/display: 3.2.167 drm/amd/display: [FW Promotion] Release 0.0.98 drm/amd/display: Undo ODM combine drm/amd/display: Add reg defs for DCN303 drm/amd/display: Changed pipe split policy to allow for multi-display pipe split drm/amd/display: Set optimize_pwr_state for DCN31 ...
2022-01-10Merge tag 'edac_updates_for_v5.17_rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras Pull EDAC updates from Borislav Petkov: - Add support for version 3 of the Synopsys DDR controller to synopsys_edac - Add support for DRR5 and new models 0x10-0x1f and 0x50-0x5f of AMD family 0x19 CPUs to amd64_edac - The usual set of fixes and cleanups * tag 'edac_updates_for_v5.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras: EDAC/amd64: Add support for family 19h, models 50h-5fh EDAC/sb_edac: Remove redundant initialization of variable rc RAS/CEC: Remove a repeated 'an' in a comment EDAC/amd64: Add support for AMD Family 19h Models 10h-1Fh and A0h-AFh EDAC: Add RDDR5 and LRDDR5 memory types EDAC/sifive: Fix non-kernel-doc comment dt-bindings: memory: Add entry for version 3.80a EDAC/synopsys: Enable the driver on Intel's N5X platform EDAC/synopsys: Add support for version 3 of the Synopsys EDAC DDR EDAC/synopsys: Use the quirk for version instead of ddr version
2022-01-10Merge tag 'arm64-upstream' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 updates from Catalin Marinas: - KCSAN enabled for arm64. - Additional kselftests to exercise the syscall ABI w.r.t. SVE/FPSIMD. - Some more SVE clean-ups and refactoring in preparation for SME support (scalable matrix extensions). - BTI clean-ups (SYM_FUNC macros etc.) - arm64 atomics clean-up and codegen improvements. - HWCAPs for FEAT_AFP (alternate floating point behaviour) and FEAT_RPRESS (increased precision of reciprocal estimate and reciprocal square root estimate). - Use SHA3 instructions to speed-up XOR. - arm64 unwind code refactoring/unification. - Avoid DC (data cache maintenance) instructions when DCZID_EL0.DZP == 1 (potentially set by a hypervisor; user-space already does this). - Perf updates for arm64: support for CI-700, HiSilicon PCIe PMU, Marvell CN10K LLC-TAD PMU, miscellaneous clean-ups. - Other fixes and clean-ups; highlights: fix the handling of erratum 1418040, correct the calculation of the nomap region boundaries, introduce io_stop_wc() mapped to the new DGH instruction (data gathering hint). * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (81 commits) arm64: Use correct method to calculate nomap region boundaries arm64: Drop outdated links in comments arm64: perf: Don't register user access sysctl handler multiple times drivers: perf: marvell_cn10k: fix an IS_ERR() vs NULL check perf/smmuv3: Fix unused variable warning when CONFIG_OF=n arm64: errata: Fix exec handling in erratum 1418040 workaround arm64: Unhash early pointer print plus improve comment asm-generic: introduce io_stop_wc() and add implementation for ARM64 arm64: Ensure that the 'bti' macro is defined where linkage.h is included arm64: remove __dma_*_area() aliases docs/arm64: delete a space from tagged-address-abi arm64: Enable KCSAN kselftest/arm64: Add pidbench for floating point syscall cases arm64/fp: Add comments documenting the usage of state restore functions kselftest/arm64: Add a test program to exercise the syscall ABI kselftest/arm64: Allow signal tests to trigger from a function kselftest/arm64: Parameterise ptrace vector length information arm64/sve: Minor clarification of ABI documentation arm64/sve: Generalise vector length configuration prctl() for SME arm64/sve: Make sysctl interface for SVE reusable by SME ...
2022-01-10Merge tag 'newsoc-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds
Pull RISC-V SoC updates from Arnd Bergmann: "Add support for StarFive JH7100 RISC-V SoC This adds support for the StarFive JH7100, including the necessary device drivers and DT files for the BeagleV Starlight prototype board, with additional boards to be added later. This SoC promises to be the first usable low-cost platform for RISC-V. I've taken this through the SoC tree in the anticipation of adding a few other Arm based SoCs as well, but those did not pass the review in time, so it's only this one" * tag 'newsoc-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: reset: starfive-jh7100: Fix 32bit compilation RISC-V: Add BeagleV Starlight Beta device tree RISC-V: Add initial StarFive JH7100 device tree serial: 8250_dw: Add StarFive JH7100 quirk dt-bindings: serial: snps-dw-apb-uart: Add JH7100 uarts pinctrl: starfive: Add pinctrl driver for StarFive SoCs dt-bindings: pinctrl: Add StarFive JH7100 bindings dt-bindings: pinctrl: Add StarFive pinctrl definitions reset: starfive-jh7100: Add StarFive JH7100 reset driver dt-bindings: reset: Add Starfive JH7100 reset bindings dt-bindings: reset: Add StarFive JH7100 reset definitions clk: starfive: Add JH7100 clock generator driver dt-bindings: clock: starfive: Add JH7100 bindings dt-bindings: clock: starfive: Add JH7100 clock definitions dt-bindings: interrupt-controller: Add StarFive JH7100 plic dt-bindings: timer: Add StarFive JH7100 clint RISC-V: Add StarFive SoC Kconfig option
2022-01-10Merge tag 'dt-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds
Pull ARM SoC devicetree updates from Arnd Bergmann: "As usual, this is the bulk of the updates for the SoC tree, adding more devices to existing files, addressing issues from ever improving automated checking, and fixing minor issues. The most interesting bits as usual are the new platforms. All the newly supported SoCs belong into existing families this time: - Qualcomm gets support for two newly announced platforms, both of which can now work in production environments: the SDX65 5G modem that can run a minimal Linux on its Cortex-A7 core, and the Snapdragon 8 Gen 1, their latest high-end phone SoC. - Renesas adds support for R-Car S4-8, the most recent automotive Server/Communication SoC. - TI adds support for J721s2, a new automotive SoC in the K3 family. - Mediatek MT7986a/b is a SoC used in Wifi routers, the latest generation following their popular MT76xx series. Only basic support is added for now. - NXP i.MX8 ULP8 is a new low-power variant of the widespread i.MX8 series. - TI SPEAr320s is a minor variant of the old SPEAr320 SoC that we have supported for a long time. New boards with the existing SoCs include - Aspeed AST2500/AST2600 BMCs in TYAN, Facebook and Yadro servers - AT91/SAMA5 based evaluation board - NXP gains twenty new development and industrial boards for their i.MX and Layerscape SoCs - Intel IXP4xx now supports the final two machines in device tree that were previously only supported in old style board files. - Mediatek MT6589 is used in the Fairphone FP1 phone from 2013, while MT8183 is used in the Acer Chromebook 314. - Qualcomm gains support for the reference machines using the two new SoCs, plus a number of Chromebook variants and phones based on the Snapdragon 7c, 845 and 888 SoCs, including various Sony Xperia devices and the Microsoft Surface Duo 2. - ST STM32 now supports the Engicam i.Core STM32MP1 carrier board. - Tegra now boots various older Android devices based on 32-bit chips out of the box, including a number of ASUS Transformer tablets. There is also a new Jetson AGX Orin developer kit. - Apple support adds the missing device trees for all the remaining M1 Macbook and iMac variants, though not yet the M1 Pro/Max versions. - Allwinner now supports another version of the Tanix TX6 set-top box based on the H6 SoC. - Broadcom gains support for the Netgear RAXE500 Wireless router based on BCM4908" * tag 'dt-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (574 commits) Revert "ARM: dts: BCM5301X: define RTL8365MB switch on Asus RT-AC88U" arm64: dts: qcom: sm6125: Avoid using missing SM6125_VDDCX arm64: dts: qcom: sm8450-qrd: Enable USB nodes arm64: dts: qcom: sm8450: Add usb nodes ARM: dts: aspeed: add LCLK setting into LPC KCS nodes dt-bindings: ipmi: bt-bmc: add 'clocks' as a required property ARM: dts: aspeed: add LCLK setting into LPC IBT node ARM: dts: aspeed: p10: Add TPM device ARM: dts: aspeed: p10: Enable USB host ports ARM: dts: aspeed: Add TYAN S8036 BMC machine ARM: dts: aspeed: tyan-s7106: Add uart_routing and fix vuart config ARM: dts: aspeed: Adding Facebook Bletchley BMC ARM: dts: aspeed: g220a: Enable secondary flash ARM: dts: Add openbmc-flash-layout-64-alt.dtsi ARM: dts: aspeed: Add secure boot controller node dt-bindings: aspeed: Add Secure Boot Controller bindings ARM: dts: Remove "spidev" nodes dt-bindings: pinctrl: samsung: Add pin drive definitions for Exynos850 dt-bindings: arm: samsung: Document E850-96 board binding dt-bindings: Add vendor prefix for WinLink ...
2022-01-10Merge tag 'drivers-5.17' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC driver updates from Arnd Bergmann: "There are cleanups and minor bugfixes across several SoC specific drivers, for Qualcomm, Samsung, NXP i.MX, AT91, Tegra, Keystone, Renesas, ZynqMP Noteworthy new features are: - The op-tee firmware driver gains support for asynchronous notifications from secure-world firmware. - Qualcomm platforms gain support for new SoC types in various drivers: power domain, cache controller, RPM sleep, soc-info - Samsung SoC drivers gain support for new SoCs in ChipID and PMU, as well as a new USIv2 driver that handles various types of serial communiction (uart, i2c, spi) - Renesas adds support for R-Car S4-8 (R8A779F0) in multiple drivers, as well as memory controller support for RZ/G2L (R9A07G044). - Apple M1 gains support for the PMGR power management driver" * tag 'drivers-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (94 commits) soc: qcom: rpmh-rsc: Fix typo in a comment soc: qcom: socinfo: Add SM6350 and SM7225 dt-bindings: arm: msm: Don't mark LLCC interrupt as required dt-bindings: firmware: scm: Add SM6350 compatible dt-bindings: arm: msm: Add LLCC for SM6350 soc: qcom: rpmhpd: Sort power-domain definitions and lists soc: qcom: rpmhpd: Remove mx/cx relationship on sc7280 soc: qcom: rpmhpd: Rename rpmhpd struct names soc: qcom: rpmhpd: sm8450: Add the missing .peer for sm8450_cx_ao soc: qcom: socinfo: add SM8450 ID soc: qcom: rpmhpd: Add SM8450 power domains dt-bindings: power: rpmpd: Add SM8450 to rpmpd binding soc: qcom: smem: Update max processor count dt-bindings: arm: qcom: Document SM8450 SoC and boards dt-bindings: firmware: scm: Add SM8450 compatible dt-bindings: arm: cpus: Add kryo780 compatible soc: qcom: rpmpd: Add support for sm6125 dt-bindings: qcom-rpmpd: Add sm6125 power domains soc: qcom: aoss: constify static struct thermal_cooling_device_ops PM: AVS: qcom-cpr: Use div64_ul instead of do_div ...
generated by cgit (git 2.34.1) at 2025-06-02 14:05:46 +0000