Age | Commit message (Collapse) | Author |
|
commit 53ed3233e6b5 ("dt-bindings: input: qcom,pm8921-keypad: convert to
YAML format") resulted in a renaming of the output .txt file from
qcom,pm8xxx-keypad.txt to qcom,pm8921-keypad.yaml.
This patch makes a corresponding update to the link to that .txt file
in wakeup-source.txt.
Flagged by make htmldocs:
Warning: Documentation/devicetree/bindings/power/wakeup-source.txt references a file that doesn't exist: Documentation/devicetree/bindings/input/qcom,pm8xxx-keypad.txt
Signed-off-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240908-keypad-wakeup-ref-v1-1-762e4641468a@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Add compatible for pdc interrupt controller representing support on
SA8255p.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Nikunj Kela <quic_nkela@quicinc.com>
Link: https://lore.kernel.org/r/20240905191510.3775179-1-quic_nkela@quicinc.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Corrected several typos in Documentation/devicetree/bindings files.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com>
Signed-off-by: Yu-Chun Lin <eleanor15x@gmail.com>
Link: https://lore.kernel.org/r/20240905151943.2792056-1-eleanor15x@gmail.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
- Add support for one new Elan device (ekth6a12nay) (Zhaoxiong Lv)
|
|
Endpoint
Add reg-name: "dbi2", "atu" for i.MX8M PCIe Endpoint.
For i.MX8M PCIe EP, the dbi2 and atu addresses are pre-defined in the
driver. This method is not good.
In commit b7d67c6130ee ("PCI: imx6: Add iMX95 Endpoint (EP) support"),
Frank suggests to fetch the dbi2 and atu from DT directly. This commit is
preparation to do that for i.MX8M PCIe EP.
These changes wouldn't break driver function. When "dbi2" and "atu"
properties are present, i.MX PCIe driver would fetch the according base
addresses from DT directly. If only two reg properties are provided, i.MX
PCIe driver would fall back to the old method.
Link: https://lore.kernel.org/linux-pci/1723534943-28499-2-git-send-email-hongxing.zhu@nxp.com
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Convert the devicetree bindings for the Altera PCIe MSI controller
from text to YAML.
Link: https://lore.kernel.org/linux-pci/20240717181756.2177553-1-matthew.gerlach@linux.intel.com
Signed-off-by: Matthew Gerlach <matthew.gerlach@linux.intel.com>
[kwilczynski: remove unused msi0 label]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
|
|
into next
|
|
Document SA8255p compatible for the True Random Number Generator.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Nikunj Kela <quic_nkela@quicinc.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Cross-merge networking fixes after downstream PR.
No conflicts (sort of) and no adjacent changes.
This merge reverts commit b3c9e65eb227 ("net: hsr: remove seqnr_lock")
from net, as it was superseded by
commit 430d67bdcb04 ("net: hsr: Use the seqnr lock for frames received via interlink port.")
in net-next.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from netfilter.
There is a recently notified BT regression with no fix yet. I do not
think a fix will land in the next week.
Current release - regressions:
- core: tighten bad gso csum offset check in virtio_net_hdr
- netfilter: move nf flowtable bpf initialization in
nf_flow_table_module_init()
- eth: ice: stop calling pci_disable_device() as we use pcim
- eth: fou: fix null-ptr-deref in GRO.
Current release - new code bugs:
- hsr: prevent NULL pointer dereference in hsr_proxy_announce()
Previous releases - regressions:
- hsr: remove seqnr_lock
- netfilter: nft_socket: fix sk refcount leaks
- mptcp: pm: fix uaf in __timer_delete_sync
- phy: dp83822: fix NULL pointer dereference on DP83825 devices
- eth: revert "virtio_net: rx enable premapped mode by default"
- eth: octeontx2-af: Modify SMQ flush sequence to drop packets
Previous releases - always broken:
- eth: mlx5: fix bridge mode operations when there are no VFs
- eth: igb: Always call igb_xdp_ring_update_tail() under Tx lock"
* tag 'net-6.11-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (36 commits)
net: netfilter: move nf flowtable bpf initialization in nf_flow_table_module_init()
net: tighten bad gso csum offset check in virtio_net_hdr
netlink: specs: mptcp: fix port endianness
net: dpaa: Pad packets to ETH_ZLEN
mptcp: pm: Fix uaf in __timer_delete_sync
net: libwx: fix number of Rx and Tx descriptors
net: dsa: felix: ignore pending status of TAS module when it's disabled
net: hsr: prevent NULL pointer dereference in hsr_proxy_announce()
selftests: mptcp: include net_helper.sh file
selftests: mptcp: include lib.sh file
selftests: mptcp: join: restrict fullmesh endp on 1st sf
netfilter: nft_socket: make cgroupsv2 matching work with namespaces
netfilter: nft_socket: fix sk refcount leaks
MAINTAINERS: Add ethtool pse-pd to PSE NETWORK DRIVER
dt-bindings: net: tja11xx: fix the broken binding
selftests: net: csum: Fix checksums for packets with non-zero padding
net: phy: dp83822: Fix NULL pointer dereference on DP83825 devices
virtio_net: disable premapped mode by default
Revert "virtio_net: big mode skip the unmap check"
Revert "virtio_net: rx remove premapped failover code"
...
|
|
Qualcomm QCS8300 SoC includes apps smmu that implements arm,mmu-500, which
is used to translate device-visible virtual addresses to physical
addresses. Add compatible for it.
Signed-off-by: Zhenhua Huang <quic_zhenhuah@quicinc.com>
Signed-off-by: Jingyi Wang <quic_jingyw@quicinc.com>
Link: https://lore.kernel.org/r/20240911-qcs8300_smmu_binding-v2-1-f53dd9c047ba@quicinc.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
A patch for Qualcomm depends on some fixes.
|
|
The LAN8650/1 combines a Media Access Controller (MAC) and an Ethernet
PHY to enable 10BASE-T1S networks. The Ethernet Media Access Controller
(MAC) module implements a 10 Mbps half duplex Ethernet MAC, compatible
with the IEEE 802.3 standard and a 10BASE-T1S physical layer transceiver
integrated into the LAN8650/1. The communication between the Host and the
MAC-PHY is specified in the OPEN Alliance 10BASE-T1x MACPHY Serial
Interface (TC6).
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Parthiban Veerasooran <Parthiban.Veerasooran@microchip.com>
Link: https://patch.msgid.link/20240909082514.262942-15-Parthiban.Veerasooran@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"The bulk of the changes this time are for device tree files in the
rockchips platform, addressing correctness issues on individual
boards, plus one change in the rk356x SoC file to make it match the
binding.
The only other changes that came in are
- a CPU frequencey scaling fix for JH7110 (RISC-V)
- a build fix for the cznic hwrandom driver
- a fix for a deadlock in qualcomm uefi secure application firmware
driver"
* tag 'arm-fixes-6.11-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
platform: cznic: turris-omnia-mcu: fix HW_RANDOM dependency
riscv: dts: starfive: jh7110-common: Fix lower rate of CPUfreq by setting PLL0 rate to 1.5GHz
firmware: qcom: uefisecapp: Fix deadlock in qcuefi_acquire()
arm64: dts: rockchip: Fix compatibles for RK3588 VO{0,1}_GRF
dt-bindings: soc: rockchip: Fix compatibles for RK3588 VO{0,1}_GRF
arm64: dts: rockchip: override BIOS_DISABLE signal via GPIO hog on RK3399 Puma
arm64: dts: rockchip: fix eMMC/SPI corruption when audio has been used on RK3399 Puma
arm64: dts: rockchip: fix PMIC interrupt pin in pinctrl for ROCK Pi E
arm64: dts: rockchip: Remove broken tsadc pinctrl binding for rk356x
|
|
Merge updates related to system sleep, operating performance points
(OPP) updates, and PM tooling updates for 6.12-rc1:
- Remove unused stub for saveable_highmem_page() and remove deprecated
macros from power management documentation (Andy Shevchenko).
- Use ysfs_emit() and sysfs_emit_at() in "show" functions in the PM
sysfs interface (Xueqin Luo).
- Update the maintainers information for the operating-points-v2-ti-cpu DT
binding (Dhruva Gole).
- Drop unnecessary of_match_ptr() from ti-opp-supply (Rob Herring).
- Update directory handling and installation process in the pm-graph
Makefile and add .gitignore to ignore sleepgraph.py artifacts to
pm-graph (Amit Vadhavana, Yo-Jung Lin).
- Make cpupower display residency value in idle-info (Aboorva
Devarajan).
- Add missing powercap_set_enabled() stub function to cpupower (John
B. Wyatt IV).
- Add SWIG support to cpupower (John B. Wyatt IV).
* pm-sleep:
PM: hibernate: Remove unused stub for saveable_highmem_page()
Documentation: PM: Discourage use of deprecated macros
PM: sleep: Use sysfs_emit() and sysfs_emit_at() in "show" functions
PM: hibernate: Use sysfs_emit() and sysfs_emit_at() in "show" functions
* pm-opp:
dt-bindings: opp: operating-points-v2-ti-cpu: Update maintainers
opp: ti: Drop unnecessary of_match_ptr()
* pm-tools:
pm:cpupower: Add error warning when SWIG is not installed
MAINTAINERS: Add Maintainers for SWIG Python bindings
pm:cpupower: Include test_raw_pylibcpupower.py
pm:cpupower: Add SWIG bindings files for libcpupower
pm:cpupower: Add missing powercap_set_enabled() stub function
pm-graph: Update directory handling and installation process in Makefile
pm-graph: Make git ignore sleepgraph.py artifacts
tools/cpupower: display residency value in idle-info
|
|
Update the spdifrx yaml file to reference the dai-common.yaml schema,
enabling the use of the 'sound-name-prefix' property
Signed-off-by: Andrei Simion <andrei.simion@microchip.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20240910082202.45972-1-andrei.simion@microchip.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
At least if rsnd is using DPCM connection on Audio-Graph-Card2,
fw_devlink might doesn't have enough information to break the cycle
(Same problem might occur with Multi-CPU/Codec or Codec2Codec).
In such case, rsnd driver will not be probed.
Add post-init-providers support to break the link cycle.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/87wmjkifob.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/drivers
One new pmu compatible for rk3576
* tag 'v6.12-rockchip-drivers-2' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
dt-bindings: arm: rockchip: Add rk3576 compatible string to pmu.yaml
Link: https://lore.kernel.org/r/3004026.A7TYtsqqnE@diego
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc into soc/dt
ASPEED device tree updates for 6.12
- New machines
* IBM P11 AST2600 BMC machines, named Blueridge and Fuji
* Meta's Catalina AST2600 BMC
- Updates to harma, minerva, mtmitchell, mtjade, system1, SPC621D8HM3
- Various changes to the dtsi to keep the YAML checker happy
* tag 'aspeed-6.12-devicetree' of https://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc: (52 commits)
ARM: dts: aspeed: catalina: Update io expander line names
ARM: dts: aspeed: catalina: Add pdb cpld io expander
ARM: dts: aspeed: harma: Remove pca9546
ARM: dts: aspeed: harma: Fix spi-gpio dtb_check warnings
ARM: dts: aspeed: harma: Enable mctp controller
ARM: dts: aspeed: harma: Add temperature device
ARM: dts: aspeed: harma: Add fru device
ARM: dts: aspeed: harma: Remove multi-host property
ARM: dts: aspeed: harma: Add power monitor xdp710
ARM: dts: aspeed: harma: Add ina238
ARM: dts: aspeed: harma: Add sgpio name
ARM: dts: aspeed: harma: Add VR devices
ARM: dts: aspeed: harma: Revise hsc chip
ARM: dts: aspeed-g6: Drop cells properties from ethernet nodes
ARM: dts: aspeed-g6: Use generic 'ethernet' for ftgmac100 nodes
ARM: dts: aspeed: Clean up AST2500 pinctrl properties
ARM: dts: aspeed: Remove undocumented XDMA nodes
ARM: dts: aspeed: Specify required properties for sram node
ARM: dts: aspeed: Specify correct generic compatible for CVIC
ARM: dts: aspeed: Fix coprocessor interrupt controller node name
...
Link: https://lore.kernel.org/r/CACPK8XeGDUrbJ-OaxqQBR=aVVYyrKGnvT1ZKXO0vPHpsjQ_i9g@mail.gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt
New boards the Odroid-M2 and GameForce Ace, CAN on rk3568, RGA2 on rk3588
and some non-critical dts cleanups.
* tag 'v6.12-rockchip-dts64-2' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm64: dts: rockchip: add CAN0 and CAN1 interfaces to mecsbc board
arm64: dts: rockchip: add CAN-FD controller nodes to rk3568
arm64: dts: rockchip: remove duplicate nodes from dts for ROCK 4SE
arm64: dts: rockchip: Add GameForce Ace
dt-bindings: arm: rockchip: Add GameForce Ace
arm64: dts: rockchip: rk3588s fix sdio pins to pull up
arm64: dts: rockchip: Add RGA2 support to rk3588
arm64: dts: rockchip: Add missing tshut props to tsadc on quartz64-b
arm64: dts: rockchip: Add Hardkernel ODROID-M2
dt-bindings: arm: rockchip: Add Hardkernel ODROID-M2
arm64: dts: rockchip: drop hp-pin-name property from audio card on nanopc-t6
Link: https://lore.kernel.org/r/11663608.jrtcCam0TZ@diego
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://github.com/Broadcom/stblinux into soc/dt
This pull request contains Broadcom SoCs Device Tree changes for 6.12,
please pull the following:
- Krzysztof documents the AVS monitor binding present on 2711 (Raspberry
Pi 4)
- Rafal updates the Broadcom Northstar DTS files to use the recent NVMEM
binding
- Artur factors the nodes between the BCM21664 and BCM23550 SoCs since
they are nearly identical
- Stefan converts the bcm2835-system-timer and bcm2836-l1-intc to a YAML
binding syntax
* tag 'arm-soc/for-6.12/devicetree' of https://github.com/Broadcom/stblinux:
dt-bindings: interrupt-controller: convert bcm2836-l1-intc to yaml
dt-bindings: timer: convert bcm2835-system-timer bindings to YAML
ARM: dts: bcm-mobile: Split out nodes used by both BCM21664 and BCM23550
ARM: dts: broadcom: bcm21664: Move chosen node into Garnet DTS
ARM: dts: broadcom: convert NVMEM content to layout syntax
dt-bindings: soc: bcm: document brcm,bcm2711-avs-monitor
Link: https://lore.kernel.org/r/20240906180643.2275460-1-florian.fainelli@broadcom.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Thomas needs 5a498d4d06d6 ("drm/fbdev-dma: Only install deferred I/O
if necessary") in drm-misc, so start the backmerge cascade.
Signed-off-by: Simona Vetter <simona.vetter@ffwll.ch>
|
|
The "amlogic,tx-delay-ns" property schema has unnecessary type reference
as it's a standard unit suffix, and the constraints are in freeform
text rather than schema.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://patch.msgid.link/20240909172342.487675-2-robh@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
As Rob pointed in another mail thread [1], the binding of tja11xx PHY
is completely broken, the schema cannot catch the error in the DTS. A
compatiable string must be needed if we want to add a custom propety.
So extract known PHY IDs from the tja11xx PHY drivers and convert them
into supported compatible string list to fix the broken binding issue.
Fixes: 52b2fe4535ad ("dt-bindings: net: tja11xx: add nxp,refclk_in property")
Link: https://lore.kernel.org/31058f49-bac5-49a9-a422-c43b121bf049@kernel.org # [1]
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20240909012152.431647-1-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Describe the inputs from the PMU that the Bluetooth module on wcn6855
consumes and drop the ones from the host. This breaks the current
contract but the only two users of wcn6855 upstream - sc8280xp based
boards - will be updated in DTS patches sent separately while the
hci_qca driver will remain backwards compatible with older DT sources.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Add binding document for Amlogic Bluetooth chipsets attached over UART.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Yang Li <yang.li@amlogic.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
To update with the latest fixes.
|
|
Add i.MX8Q PCIe "fsl,imx8q-pcie" compatible strings. clock-names align
DesignWare Cores (DWC) common naming convension.
Link: https://lore.kernel.org/linux-pci/20240729-pci2_upstream-v8-9-b68ee5ef2b4d@nxp.com
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
|
Allow fixed-partitions to be specified through a partitions
node.
Fixes the below dtbs_check warning:
arch/arm64/boot/dts/ti/k3-am642-evm-nand.dtb: nand@0,0: Unevaluated properties are not allowed ('partitions' was unexpected)
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20240903-gpmc-dtb-v2-1-8046c1915b96@kernel.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are some small char/misc/other driver fixes for 6.11-rc7. It's
nothing huge, just a bunch of small fixes of reported problems,
including:
- lots of tiny iio driver fixes
- nvmem driver fixex
- binder UAF bugfix
- uio driver crash fix
- other small fixes
All of these have been in linux-next this week with no reported
problems"
* tag 'char-misc-6.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (21 commits)
VMCI: Fix use-after-free when removing resource in vmci_resource_remove()
Drivers: hv: vmbus: Fix rescind handling in uio_hv_generic
uio_hv_generic: Fix kernel NULL pointer dereference in hv_uio_rescind
misc: keba: Fix sysfs group creation
dt-bindings: nvmem: Use soc-nvmem node name instead of nvmem
nvmem: Fix return type of devm_nvmem_device_get() in kerneldoc
nvmem: u-boot-env: error if NVMEM device is too small
misc: fastrpc: Fix double free of 'buf' in error path
binder: fix UAF caused by offsets overwrite
iio: imu: inv_mpu6050: fix interrupt status read for old buggy chips
iio: adc: ad7173: fix GPIO device info
iio: adc: ad7124: fix DT configuration parsing
iio: adc: ad_sigma_delta: fix irq_flags on irq request
iio: adc: ads1119: Fix IRQ flags
iio: fix scale application in iio_convert_raw_to_processed_unlocked
iio: adc: ad7124: fix config comparison
iio: adc: ad7124: fix chip ID mismatch
iio: adc: ad7173: Fix incorrect compatible string
iio: buffer-dmaengine: fix releasing dma channel on error
iio: adc: ad7606: remove frstdata check for serial mode
...
|
|
https://gitlab.freedesktop.org/drm/msm into drm-next
Updates for v6.12
DPU:
- Fix implement DP/PHY mapping on SC8180X
- Enable writeback on SM8150, SC8180X, SM6125, SM6350
DP:
- Enable widebus on all relevant chipsets
DSI:
- Fix PHY programming on SM8350 / SM8450
HDMI:
- Add support for HDMI on MSM8998
MDP5:
- NULL string fix
GPU:
- A642L speedbin support
- A615 support
- A306 support
- A621 support
- Expand UBWC uapi
- A7xx GPU devcoredump fixes
- A5xx preemption fixes
- cleanups
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGudK7YMiKDhtvYgp=bY64OZZt0UQSkEkSxLo4rLmeVd9g@mail.gmail.com
|
|
Merge series from Andre Przywara <andre.przywara@arm.com>:
This is remainder of the AXP717 fix series, containing support for the
boost regulator. This is meant to increase the battery voltage to the 5
volts required to provide the USB VBUS power.
It's the usual trinity of DT bindings patch (1/3), the MFD part
describing the PMIC registers (2/3) and the final patch to model the
regulator (3/3).
Compared to v2, this drops the merged patches, and just retains the
boost related parts. It also changes the internal name of the register
to AXP717_MODULE_EN_CONTROL_2, since there is another control register
we will need later for battery support.
|
|
The X-Powers AXP717 contains a boost regulator, that it meant to provide
the 5V USB VBUS voltage when the devices operates on battery.
Add the name "boost" to the regexp describing the allowed node names,
to allow the regulator to be described in the devicetree.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Lee Jones <lee@kernel.org>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Link: https://patch.msgid.link/20240816001824.6028-2-andre.przywara@arm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/vireshk/pm
Merge OPP Updates for 6.12 from Viresh Kumar:
"- Update maintainers for operating-points-v2-ti-cpu file (Dhruva Gole).
- Drop unnecessary of_match_ptr() for TI driver (Rob Herring)."
* tag 'opp-updates-6.12' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
dt-bindings: opp: operating-points-v2-ti-cpu: Update maintainers
opp: ti: Drop unnecessary of_match_ptr()
|
|
Add compatible string for Rockchip RK3576 timer.
Signed-off-by: Detlev Casanova <detlev.casanova@collabora.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20240802214612.434179-9-detlev.casanova@collabora.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Add compatible for smmu representing support on SA8255p.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Nikunj Kela <quic_nkela@quicinc.com>
Link: https://lore.kernel.org/r/20240905193656.3785537-1-quic_nkela@quicinc.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Add an initial binding for the Arm NI-700 interconnect PMU. As with the
Arm CMN family, there are already future NI products on the roadmap, so
the overall binding is named generically just in case any
non-discoverable incompatibility between generations crops up.
Cc: devicetree@vger.kernel.org
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/5f86237580219116de37e5e54d8b7eb0c9ed580d.1725470837.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/chunkuang.hu/linux into drm-next
Mediatek DRM Next for Linux 6.12
1. Support alpha blending
2. Remove cl in struct cmdq_pkt
3. Fixup for ovl adaptor
4. Declare Z Position for all planes
5. Drop unnecessary check for property presence
6. Add dsi per-frame lp code for mt8188
7. Fix missing configuration flags in mtk_crtc_ddp_config()
8. Use spin_lock_irqsave() for CRTC event lock
9. Add power domain binding to the mediatek DPI controller
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240901131354.2686-1-chunkuang.hu@kernel.org
|
|
Cross-merge networking fixes after downstream PR.
Conflicts:
drivers/net/phy/phy_device.c
2560db6ede1a ("net: phy: Fix missing of_node_put() for leds")
1dce520abd46 ("net: phy: Use for_each_available_child_of_node_scoped()")
https://lore.kernel.org/20240904115823.74333648@canb.auug.org.au
Adjacent changes:
drivers/net/ethernet/xilinx/xilinx_axienet.h
drivers/net/ethernet/xilinx/xilinx_axienet_main.c
858430db28a5 ("net: xilinx: axienet: Fix race in axienet_stop")
76abb5d675c4 ("net: xilinx: axienet: Add statistics support")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
A zpos normalization fix for komeda, a register bitmask fix for nouveau,
a memory leak fix for imagination, three fixes for the recent bridge
HDMI work, a potential DoS fix and a cache coherency for panthor, a
change of panel compatible and a deferred-io fix when used with
non-highmem memory.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <mripard@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240905-original-radical-guan-e7a2ae@houat
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into soc/dt
Allwinner SoC device tree changes for 6.12
ARM64 device tree and binding-only changes
- Move PMIC on RG35XX boards from RSB (Allwinner proprietary bus) to I2C
- Introduce Anbernic RG35XX-SP board
- Enable charger on RG35XX boards
- Add thermal trip points for Allwinner A64 GPU
* tag 'sunxi-dt-for-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
arm64: dts: allwinner: a64: Add GPU thermal trips to the SoC dtsi
arm64: dts: allwinner: h700: Add charger for Anbernic RG35XX
arm64: dts: allwinner: h700: Add Anbernic RG35XX-SP
arm64: dts: allwinner: h616: Change RG35XX Series from r_rsb to r_i2c
arm64: dts: allwinner: h616: Add r_i2c pinctrl nodes
dt-bindings: arm: sunxi: Add Anbernic RG35XXSP
Link: https://lore.kernel.org/r/ZtnZRhTwsBeO7Qtb@wens.tw
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Another batch of compatibles unlikely to ever be documented. It's
mostly old PowerMAC and PPC stuff found in DT compatible API calls.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240904200253.3112699-1-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
The flexspi on imx8ulp only has 16 number of LUTs, it is different
with flexspi on other imx SoC which has 32 number of LUTs.
Fixes: ef89fd56bdfc ("arm64: dts: imx8ulp: add flexspi node")
Cc: stable@kernel.org
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20240905094338.1986871-2-haibo.chen@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Merge "hwmon fixes for v6.11-rc7" into review-hans to bring in
commit a54da9df75cd ("hwmon: (hp-wmi-sensors) Check if WMI event
data exists").
This is a dependency for a set of WMI event data refactoring changes.
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux into soc/drivers
Amlogic drivers changes for v6.12:
- Support new Amlogic SoCs in meson-gx-ao-secure & meson-gx-socinfo
* tag 'amlogic-drivers-for-v6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux:
soc: amlogic: meson-gx-socinfo: add new SoCs id
dt-bindings: arm: amlogic: meson-gx-ao-secure: support more SoCs
Link: https://lore.kernel.org/r/577ad7fe-19b1-468a-b994-573855493fd7@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux into soc/dt
Amlogic ARM64 DT changes for v6.12:
- New Boards:
- AW419 (Amlogic C3)
- Power Controller node for Amlogic A5 SoC
- Always-On Secure node for Amlogig A4/T7/C4 & S4 SoCs
- Amlogic A4 & C3 hardware support:
- PLL, SPICC, NOND, SDCard, Ethernet, Watchdog
- Final fixes for DTBs check:
- add clock and clock-names to sound cards
- drop saradc gxlx compatible
* tag 'amlogic-arm64-dt-for-v6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux:
arm64: dts: amlogic: gxlx-s905l-p271: drop saradc gxlx compatible
arm64: dts: amlogic: add clock and clock-names to sound cards
arm64: dts: amlogic: c3: fix dtbcheck warning
arm64: dts: amlogic: add C3 AW419 board
arm64: dts: amlogic: add some device nodes for C3
dt-bindings: clock: fix C3 PLL input parameter
arm64: dts: amlogic: a4: add ao secure node
arm64: dts: amlogic: t7: add ao secure node
arm64: dts: amlogic: c3: add ao secure node
arm64: dts: amlogic: s4: add ao secure node
arm64: dts: amlogic: add watchdog node for A4 SoCs
arm64: dts: amlogic: enable some device nodes for S4
arm64: dts: amlogic: a5: add power domain controller node
Link: https://lore.kernel.org/r/cc8fb460-5ac0-4b16-8490-8ac9f89f1b7f@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers
Qualcomm driver updates for v6.12
Support is added for making SCM driver configure the system either for a
full or minimal ramdump following a system crash. The ramdump mode is
changed from being enable-only to enable/disable as requested.
The QSEECOM uefisecapp interface is allow-listed on Surface Laptop 7 and
Lenovo Thinkpad T14s, providing EFI variable access.
The change to match the SMD RPM driver based on the SMD channel name is
reverted, in favor of stepping back to OF-based matching, as a means to
get module autoloading to work properly.
AOSS, APR, ICE, OCMEM, PBS and SMP2P drivers has error handling cleaned
up using scoped resources.
Trace events are added to the BWMON and SMP2P drivers, for better
insights into their operations.
The X1E LLCC configuration data is updated based on recommended values.
A number of platforms are added to the in-kernel PD-mapper.
SocInfo driver is extended with IDs from SM7325, QCS8275 and QCS8300
families.
* tag 'qcom-drivers-for-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (33 commits)
firmware: qcom: scm: Allow QSEECOM on Surface Laptop 7 models
dt-bindings: soc: qcom: qcom,pmic-glink: Document SM7325 compatible
soc: qcom: pd_mapper: Add SM7325 compatible
soc: qcom: socinfo: Add Soc IDs for SM7325 family
dt-bindings: arm: qcom,ids: Add IDs for SM7325 family
soc: qcom: socinfo: add QCS8275/QCS8300 SoC ID
dt-bindings: arm: qcom,ids: add SoC ID for QCS8275/QCS8300
soc: qcom: smp2p: use scoped device node handling to simplify error paths
soc: qcom: pbs: use scoped device node handling to simplify error paths
soc: qcom: ocmem: use scoped device node handling to simplify error paths
soc: qcom: ice: use scoped device node handling to simplify error paths
soc: qcom: aoss: simplify with scoped for each OF child loop
soc: qcom: apr: simplify with scoped for each OF child loop
soc: qcom: smd-rpm: add qcom,smd-rpm compatible
dt-bindings: soc: qcom: smd-rpm: add generic compatibles
Revert "soc: qcom: smd-rpm: Match rpmsg channel instead of compatible"
firmware: qcom: scm: Add multiple download mode support
firmware: qcom: scm: Refactor code to support multiple dload mode
soc: qcom: pd_mapper: Add more older platforms without domains
soc: qcom: pd_mapper: Add X1E80100
...
Link: https://lore.kernel.org/r/20240904193042.15118-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into soc/drivers
Microchip AT91 SoC updates for v6.12
It contains:
- support for the Microchip SAM9X7 SoC:
-- power management
-- SoC identification
-- sysreg documentation updates
-- necessary Kconfig updates
* tag 'at91-soc-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
ARM: at91: Kconfig: add config flag for SAM9X7 SoC
ARM: at91: add support in SoC driver for new sam9x7
ARM: at91: pm: add sam9x7 SoC init config
ARM: at91: pm: add support for sam9x7 SoC family
dt-bindings: atmel-sysreg: add sam9x7
Link: https://lore.kernel.org/r/20240901133110.2038675-3-claudiu.beznea@tuxon.dev
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
soc/drivers
Reset controller updates for v6.12
Use get_device()/put_device() to keep reset controller devices alive
while their reset controls are acquired.
Enable support for the Amlogic T7 SoC reset controller.
Remove unused EyeQ reset bindings and add a reset controller driver
to be instantiated as auxiliary device by the EyeQ clock driver.
Fix OF node leaks in the k210 and berlin probe() error paths.
Add some simplifications and cleanup in the core, lcp18xx driver, and
uniphier bindings.
* tag 'reset-for-v6.12' of git://git.pengutronix.de/pza/linux:
reset: eyeq: add platform driver
Revert "dt-bindings: reset: mobileye,eyeq5-reset: add bindings"
reset: reset-meson: Add support for Amlogic T7 SoC reset controller
dt-bindings: reset: Add Amlogic T7 reset controller
reset: core: add get_device()/put_device on rcdev
reset: lpc18xx: simplify with devm_clk_get_enabled()
reset: lpc18xx: simplify with dev_err_probe()
reset: simplify locking with guard()
reset: k210: fix OF node leak in probe() error path
reset: berlin: fix OF node leak in probe() error path
dt-bindings: reset: socionext,uniphier-glue-reset: add top-level constraints
Link: https://lore.kernel.org/r/20240904103921.1479579-1-p.zabel@pengutronix.de
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next
Marc Kleine-Budde says:
====================
pull-request: can-next 2024-09-04-2
this is a pull request of 18 patches for net-next/master.
All 18 patches add support for CAN-FD IP core found on Rockchip
RK3568.
The first patch is co-developed by Elaine Zhang and me and adds DT
bindings documentation.
The remaining 17 patches are by me and add the driver in several
stages.
linux-can-next-for-6.12-20240904-2
* tag 'linux-can-next-for-6.12-20240904-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next:
can: rockchip_canfd: add support for CAN_CTRLMODE_BERR_REPORTING
can: rockchip_canfd: add support for CAN_CTRLMODE_LOOPBACK
can: rockchip_canfd: add hardware timestamping support
can: rockchip_canfd: enable full TX-FIFO depth of 2
can: rockchip_canfd: prepare to use full TX-FIFO depth
can: rockchip_canfd: add stats support for errata workarounds
can: rockchip_canfd: rkcanfd_get_berr_counter_corrected(): work around broken {RX,TX}ERRORCNT register
can: rockchip_canfd: implement workaround for erratum 12
can: rockchip_canfd: implement workaround for erratum 6
can: rockchip_canfd: add TX PATH
can: rockchip_canfd: rkcanfd_register_done(): add warning for erratum 5
can: rockchip_canfd: rkcanfd_handle_rx_int_one(): implement workaround for erratum 5: check for empty FIFO
can: rockchip_canfd: add notes about known issues
can: rockchip_canfd: add support for rk3568v3
can: rockchip_canfd: add quirk for broken CAN-FD support
can: rockchip_canfd: add quirks for errata workarounds
can: rockchip_canfd: add driver for Rockchip CAN-FD controller
dt-bindings: can: rockchip_canfd: add rockchip CAN-FD controller
====================
Link: https://patch.msgid.link/20240904130256.1965582-1-mkl@pengutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|