| Age | Commit message (Collapse) | Author |
|---|
|
https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux into soc/dt
Amlogic ARM64 DT for v6.17:
- Align wifi node name with bindings
- Add pinctrl nodes for Amlogic S7/S7D/S6 nodes
- Enable the NPU nodes on Alta & VIM3
- New boards:
- Ugoos AM3
* tag 'amlogic-arm64-dt-for-v6.17' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux:
arm64: dts: amlogic: Enable the npu node for Alta and VIM3
dts: arm64: amlogic: add S6 pinctrl node
dts: arm64: amlogic: add S7D pinctrl node
dts: arm64: amlogic: add S7 pinctrl node
arm64: dts: amlogic: Add Ugoos AM3
dt-bindings: arm: amlogic: Add Ugoos AM3
arm64: dts: amlogic: Align wifi node name with bindings
Link: https://lore.kernel.org/r/3d93b621-9544-4a68-85db-6f87a9e8fa5c@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt
Qualcomm Arm64 DeviceTree updates for v6.17
79b896e7da7e arm64: dts: qcom: msm8976-longcheer-l9360: Add initial device tree
6516961352a1 arm64: dts: qcom: Add support for X1-based Asus Zenbook A14
The DB410c D3 camera mezzanine is converted to an overlay.
On MSM8976 SDC2 pinctrl definitions are introduced and BLSP DMA
controller is marked to be managed by another entity.
Add camera subsystem on the QCM2290 platform.
Add and enable remoteproc and related devices on QCS615.
Add and enable Video encoder/decoder on QCS8300 and SA8775P.
Also on SA8775P add CPU OPP tables for scaling DDR/L3 bandwidth based on
CPU frequency, add L3 interconnect definitions, DSI and video
encoder/decoder support.
Enable the SLPI remoteproc on SDM850-based Lenovo Yoga C630.
On SM6350, add the video clock controller, APR and some audio related
services.
Describe the camera subsystem on SM8550 and add Iris video
encoder/decoder node for SM8650.
On SM8750 introduce UFS and Soundwire support, enable these and describe
the sound hardware on MTP and QRD.
Add camera clock controller on SC8180X.
On X Elite, for the Dell XPS13, add WiFi and Bluetooth pwrseq and enable
the fingerprint sensor. For HP Omnibook X14 USB1 SS1 SBU mux and do
some misc cleanup.
Replace the thermal zones inherited from X Elite with X Plus-specific
ones.
Add missing interrupts and clean up unrelated clocks for PCIe
controllers across a variety of platforms.
* tag 'qcom-arm64-for-6.17' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (67 commits)
arm64: dts: qcom: sm8150: Drop unrelated clocks from PCIe hosts
arm64: dts: qcom: sc8180x: Drop unrelated clocks from PCIe hosts
arm64: dts: qcom: x1-asus-zenbook: support sound
arm64: dts: qcom: x1-asus-zenbook: fixup GPU nodes
arm64: dts: qcom: sm6115: add debug UART pins
arm64: dts: qcom: sm8650: add iris DT node
arm64: dts: qcom: msm8976-longcheer-l9360: Add initial device tree
arm64: dts: qcom: msm8976: Add sdc2 GPIOs
dt-bindings: arm: qcom: Add MSM8976 BQ Aquaris X5 Plus
arm64: dts: qcom: msm8976: Make blsp_dma controlled-remotely
arm64: dts: qcom: sa8775p: Correct the interrupt for remoteproc
arm64: dts: qcom: sm8550: Add support for camss
arm64: dts: qcom: qcs615: disable the CTI device of the camera block
arm64: dts: qcom: qcs615-ride: enable remoteprocs
arm64: dts: qcom: qcs615: add ADSP and CDSP nodes
arm64: dts: qcom: qcs615: Add IMEM and PIL info region
arm64: dts: qcom: qcs615: Add mproc node for SEMP2P
arm64: dts: qcom: Add support for X1-based Asus Zenbook A14
arm64: dts: qcom: sc7180: Expand IMEM region
arm64: dts: qcom: sdm845: Expand IMEM region
...
Link: https://lore.kernel.org/r/20250716031059.76348-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into soc/dt
Allwinner device tree changes for 6.17
This branch includes a change shared with the clk tree for adding
the missing PPU0 reset on the A523.
The PM domain DT binding immutable branch is also included, which
brings in v6.16-rc2, as well as PM domain bindings for other platforms.
Other changes include:
- RGB666 LCD pin definitions for the V3s PE pins and V3 PD pins
- node order fixes for the A523 dtsi
- UART1 pin definitions for A523
- Allwinner board DT binding cleanup
- EMAC support on A100/A133
- Enabled on the Liontron H-A133L board
- SID efuse, power controllers and GPU added for A523
- A523 GPU enabled on all existing boards
New boards:
- Xunlong OrangePi 4A with the Allwinner T527 SoC.
* tag 'sunxi-dt-for-6.17' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: (21 commits)
arm64: dts: allwinner: a523: enable Mali GPU for all boards
arm64: dts: allwinner: a523: add Mali GPU node
arm64: dts: allwinner: a523: Add power controller device nodes
dt-bindings: power: Add A523 PPU and PCK600 power controllers
arm64: dts: allwinner: A523: Add SID controller node
arm64: dts: allwinner: a133-liontron-h-a133l: Add Ethernet support
arm64: dts: allwinner: a100: Add EMAC support
arm64: dts: allwinner: a100: Add pin definitions for RGMII/RMII
dt-bindings: arm: sunxi: Combine board variants into enums
dt-bindings: power: qcom,rpmpd: document the Milos RPMh Power Domains
arm64: dts: allwinner: t527: Add OrangePi 4A board
arm64: dts: allwinner: a523: Add UART1 pins
arm64: dts: allwinner: a523: Move rgmii0 pins to correct location
arm64: dts: allwinner: a523: Move mmc nodes to correct position
dt-bindings: arm: sunxi: Add Xunlong OrangePi 4A board
ARM: dts: sun8i: v3: Add RGB666 LCD PD pins definition
ARM: dts: sun8i: v3s: Add RGB666 LCD PE pins definition
dt-bindings: reset: sun55i-a523-r-ccu: Add missing PPU0 reset
dt-bindings: firmware: thead,th1520: Add resets for GPU clkgen
dt-bindings: rockchip: pmu: Add compatible for RK3528
...
Link: https://lore.kernel.org/r/aHaQFe3Lr8Qzyb1M@wens.tw
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into soc/dt
TI K3 device tree updates for v6.17
Generic fixes and cleanups:
* Enable overlays for all DTB files
* Enable Schmitt Trigger by default in K3 pinctrl
SoC specific changes:
AM62D
* Add new SoC support and pinctrl entries
AM62
* Remove eMMC High Speed DDR support
* Move eMMC pinmux to top level board file
J784S4/J742S2
* Add Power on BIST (PBSIT) nodes
* Add ACSPCIE1 node
J721S2
* Add McASP support
J722S
* Add alernate audio-refclk0 node
Board changes:
Multiple boards
* Bootphase tags for Ethernet boot support
AM62D2-EVM
* Add new board support
AM62A7-SK
* Fix pinmux for main_uart1
* Add SPI NAND support
AM62P
* Fix PWM_3_DSI GPIO direction, SD pull up, I2C ups on AM62P-Verdin
* Add bootph-all property for Ethernet boot
AM62-Verdin
* Enable pull-ups on I2C buses
AM654-base-board
* Add boot phase tags for various bootmodes
AM64
* Add boot phase tag PCIe EP boot
* Fix PRU-ICSSG Ethernet ports on AM642-PhyBoard-Electra
AM69-SK
* Add idle-states for remaining SERDES instances
J722S-EVM
* Fix USB gpio-hog level for Type-C
* tag 'ti-k3-dt-for-v6.17' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux: (33 commits)
arm64: dts: ti: k3-am69-sk: Add idle-states for remaining SERDES instances
arm64: dts: ti: k3-am62a7-sk: add boot phase tags
arm64: dts: ti: k3-am654-base-board: add boot phase tags
arm64: dts: ti: k3-am65: add boot phase tags
arm64: dts: ti: k3-am69-sk: Add bootph-all property to enable Ethernet boot
arm64: dts: ti: k3-j722s-evm: Add bootph-all property to enable Ethernet boot
arm64: dts: ti: k3-am62p5-sk: Add bootph-all property to enable Ethernet boot
arm64: dts: ti: k3-am68-sk-base-board: Add bootph-all property to enable Ethernet boot
arm64: dts: ti: Add support for AM62D2-EVM
arm64: dts: ti: Add pinctrl entries for AM62D2 family of SoCs
dt-bindings: arm: ti: Add AM62D2 SoC and Boards
arm64: dts: ti: Add bootph property to nodes at source for am62a
arm64: dts: ti: k3-am62p-verdin: Adjust temperature trip points
arm64: dts: ti: k3-am62p-j722s: Enable freq throttling on thermal alert
arm64: dts: ti: k3-j784s4-j742s2-main-common: Add PBIST_14 node
dt-bindings: soc: ti: bist: Add BIST for K3 devices
arm64: dts: ti: k3-am62-main: Remove eMMC High Speed DDR support
arm64: dts: ti: k3-am62*: Move eMMC pinmux to top level board file
arm64: dts: ti: k3-am62a7-sk: fix pinmux for main_uart1
arm64: dts: ti: Enable overlays for all DTB files
...
Link: https://lore.kernel.org/r/a0401460-8c67-4c29-a6cf-fa4bdf33bc7d@ti.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt
Qualcomm Arm32 DeviceTree updates for v6.17
Add aliases for MMC controllers on MSM8974, enable USB charging on the
Sony Xperia Rhine platform and add new DeviceTree for the Sony Xperia Z
Ultra device.
Tidy up interrupts specifiers on MSM8960, by using macro constants.
* tag 'qcom-arm32-for-6.17' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
ARM: dts: qcom: msm8974-sony-xperia-rhine: Add alias for mmc0 & mmc1
ARM: dts: qcom: msm8974-hammerhead: Add alias for mmc0
ARM: dts: qcom: msm8974-oneplus-bacon: Add alias for mmc0
ARM: dts: qcom: Add initial support for Sony Xperia Z Ultra (togari)
dt-bindings: arm: qcom: Add Sony Xperia Z Ultra (togari)
ARM: dts: qcom: msm8974-sony-xperia-rhine: Move camera buttons to amami & honami
ARM: dts: qcom: msm8974-sony-xperia-rhine: Enable USB charging
ARM: dts: qcom: msm8960: use macros for interrupts
ARM: dts: qcom: Align wifi node name with bindings
Link: https://lore.kernel.org/r/20250715021838.14751-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
into soc/dt
RISC-V SpacemiT DT changes for 6.17
- Add DMA translation buses
- Add PWM support
- Add Reset support
- Add eMMC node
* tag 'spacemit-dt-for-6.17-1' of https://github.com/spacemit-com/linux:
riscv: dts: spacemit: Move eMMC under storage-bus for K1
riscv: dts: spacemit: Move UARTs under dma-bus for K1
riscv: dts: spacemit: Add DMA translation buses for K1
riscv: dts: spacemit: add pwm14_1 pinctrl setting
riscv: dts: spacemit: add PWM support for K1 SoC
riscv: dts: spacemit: add reset support for the K1 SoC
dt-bindings: soc: spacemit: define spacemit,k1-ccu resets
riscv: dts: spacemit: enable eMMC for K1 SoC
Link: https://lore.kernel.org/r/20250715014214-GYA540030@gentoo
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt
i.MX dt-bindings changes for 6.17:
- New board compatibles for i.MX28 Amarula, Engicam MicroGEA, GOcontroll
and phyCORE-i.MX 95 Plus FPSC SoM
- A couple of i.MX AIPSTZ bridge related bindings updates from
Laurentiu Mihalcea
* tag 'imx-bindings-6.17' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
dt-bindings: add imx95-libra-rdk-fpsc
dt-bindings: arm: fsl: support Engicam MicroGEA GTW board
dt-bindings: arm: fsl: support Engicam MicroGEA RMM board
dt-bindings: arm: fsl: support Engicam MicroGEA BMM board
dt-bindings: dsp: fsl,dsp: document 'access-controllers' property
dt-bindings: bus: document the IMX AIPSTZ bridge
dt-bindings: arm: fsl: add i.MX28 Amarula rmm board
dt-bindings: arm: fsl: Add GOcontroll Moduline Display
Link: https://lore.kernel.org/r/20250713055441.221235-2-shawnguo2@yeah.net
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/dt
dt-bindings: Updates for v6.17-rc1
Add Tegra264 compatible strings for some core components and extend
bindings where necessary to accomodate the new hardware generation. Also
document some new platforms, for both old and new chips.
* tag 'tegra-for-6.17-dt-bindings' of https://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
dt-bindings: arm: tegra: Add Asus Portable AiO P1801-T
dt-bindings: arm: tegra: Add Asus VivoTab RT TF600T
dt-bindings: Add Tegra264 clock and reset definitions
dt-bindings: tegra: Document P3971-0089+P3834-0008 Platform
dt-bindings: rtc: tegra: Document Tegra264 RTC
dt-bindings: dma: Add Tegra264 compatible string
dt-bindings: misc: Document Tegra264 APBMISC compatible
dt-bindings: firmware: Document Tegra264 BPMP
dt-bindings: mailbox: tegra-hsp: Properly sort compatible string list
dt-bindings: mailbox: tegra-hsp: Bump number of shared interrupts
dt-bindings: tegra: pmc: Add Tegra264 compatible
dt-bindings: memory: tegra: Add Tegra264 support
Link: https://lore.kernel.org/r/20250711220943.2389322-3-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
SA8255p platform abstracts resources such as clocks, interconnect
configuration in Firmware.
Add DT bindings for the QUP Wrapper on sa8255p platform.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Nikunj Kela <quic_nkela@quicinc.com>
Co-developed-by: Praveen Talari <quic_ptalari@quicinc.com>
Signed-off-by: Praveen Talari <quic_ptalari@quicinc.com>
Link: https://lore.kernel.org/r/20250721174532.14022-3-quic_ptalari@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
SA8255p platform abstracts resources such as clocks, interconnect and
GPIO pins configuration in Firmware. SCMI power and perf protocols are
used to send request for resource configurations.
Add DT bindings for the QUP GENI UART controller on sa8255p platform.
The wakeup interrupt (IRQ) is treated as optional, as not all UART
instances have a wakeup-capable interrupt routed via the PDC.
Signed-off-by: Nikunj Kela <quic_nkela@quicinc.com>
Co-developed-by: Praveen Talari <quic_ptalari@quicinc.com>
Signed-off-by: Praveen Talari <quic_ptalari@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250721174532.14022-2-quic_ptalari@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Merge miscellaneous power management updates and cpupower utility
updates for 6.17-rc1:
- Update contact information in the PM ABI docs and maintainer
information in the power domains DT binding (Rafael Wysocki)
- Update PM header inclusions to follow the IWYU (Include What You Use)
principle (Andy Shevchenko)
- Add flags to specify power on attach/detach for PM domains, make the
driver core detach PM domains in device_unbind_cleanup(), and drop
the dev_pm_domain_detach() call from the platform bus type (Claudiu
Beznea)
- Improve Python binding's Makefile for cpupower (John B. Wyatt IV)
- Fix printing of CORE, CPU fields in cpupower-monitor (Gautham Shenoy)
* pm-misc:
PM: docs: Use my kernel.org address in ABI docs and DT bindings
driver core: platform: Drop dev_pm_domain_detach() call
PM: domains: Detach on device_unbind_cleanup()
PM: domains: Add flags to specify power on attach/detach
PM: Don't use "proxy" headers
* pm-tools:
cpupower: Improve Python binding's Makefile
pm: cpupower: Fix printing of CORE, CPU fields in cpupower-monitor
pm: cpupower: Fix the snapshot-order of tsc,mperf, clock in mperf_stop()
|
|
Convert the Broadcom Stingray USB PHY binding to DT schema format. It's
a straight forward conversion.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20250627220126.214577-1-robh@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Convert the TI DA830 USB PHY binding to DT schema format. Add "clocks"
and "clock-names" which are already in use. As they are always present,
make them required as well.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: David Lechner <david@lechnology.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250627220107.214162-1-robh@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Examples should not have the 'status' property and 'okay' is anyway by
default.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250701063636.23872-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
assigned-clock* properties can be used by default now, so allow them.
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250707-dt-bindings-phy-mixel-mipi-dsi-phy-allow-assign-clock-properties-v1-1-5e34b257e1ef@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Document the Synopsys eUSB2 PHY on the Milos SoC by using the SM8550 as
fallback.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Link: https://lore.kernel.org/r/20250715-sm7635-eusb-phy-v3-2-6c3224085eb6@fairphone.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Document the Milos dwc3 compatible.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Link: https://lore.kernel.org/r/20250715-sm7635-eusb-phy-v3-1-6c3224085eb6@fairphone.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
QCS615
QCS615 pcie phy only use 5 clocks, which are aux, cfg_ahb, ref,
ref_gen, pipe. So move "qcom,qcs615-qmp-gen3x1-pcie-phy" compatible
from 6 clocks' list to 5 clocks' list.
Fixes: 1e889f2bd837 ("dt-bindings: phy: qcom,sc8280xp-qmp-pcie-phy: Document the QCS615 QMP PCIe PHY Gen3 x1")
Signed-off-by: Ziyue Zhang <ziyue.zhang@oss.qualcomm.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20250703095630.669044-2-ziyue.zhang@oss.qualcomm.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Add documentation and driver for the interconnect on the Milos SoC.
* icc-milos
dt-bindings: interconnect: document the RPMh Network-On-Chip Interconnect in Qualcomm Milos SoC
interconnect: qcom: Add Milos interconnect provider driver
Link: https://lore.kernel.org/r/20250709-sm7635-icc-v3-0-c446203c3b3a@fairphone.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ath/ath into wireless-next
Jeff Johnson says:
==================
ath.git patches for v6.17
Highlights for some specific drivers include:
ath9k:
Add AHB "of" support
ath11k:
Support device-specific firmware override
Fix potentially reordered access to device memory
ath12k:
Add more Wi-Fi 7 functionality
Add more statistics to DebugFS
Support different memory profiles
Support 802.11 encap/decap offload to firmware
Fix potentially reordered access to device memory
And of course there is the usual set of cleanups and bug fixes across
the entire family of "ath" drivers.
==================
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Add the compatible string for Tegra210B01 SOC_THERM
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Aaron Kling <webgeek1234@gmail.com>
Link: https://lore.kernel.org/r/20250720-t210b01-v2-5-9cb209f1edfc@gmail.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
and MT8516
The ‘mediatek,mt7981-thermal’ and ‘mediatek,mt8516-thermal’ strings
aren't definied in the driver. Both should have fallback compatible
strings. This commit fixes this issue.
Fixes: 788494ba0999 ("dt-bindings: thermal: convert Mediatek Thermal to the json-schema")
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rafał Miłecki <rafal@milecki.pl>
Link: https://lore.kernel.org/r/20250712195904.6988-2-olek2@wp.pl
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into clk-fixes
Pull Allwinner clock fixes from Chen-Yu Tsai:
- Mark A523 MBUS clock as critical
- Fix names of CSI related clocks on V3s
This includes changes to the driver, DT bindings and DT files.
- Fix parents of TCON clock on V3s
* tag 'sunxi-clk-fixes-for-6.16' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
clk: sunxi-ng: v3s: Fix TCON clock parents
clk: sunxi-ng: v3s: Fix CSI1 MCLK clock name
clk: sunxi-ng: v3s: Fix CSI SCLK clock name
clk: sunxi-ng: a523: Mark MBUS clock as critical
|
|
Qualcomm Milos SoC
Document the RPMh Network-On-Chip Interconnect of the Milos (e.g.
SM7635) SoC.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Link: https://lore.kernel.org/r/20250709-sm7635-icc-v3-1-c446203c3b3a@fairphone.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
In SpacemiT's K1 SoC, the clocks for UART are mandatory needed, so
for DT, both clocks and clock-names property should be set as required.
Fixes: 2c0594f9f062 ("dt-bindings: serial: 8250: support an optional second clock")
Signed-off-by: Yixun Lan <dlan@gentoo.org>
Acked-by: "Rob Herring (Arm)" <robh@kernel.org>
Link: https://lore.kernel.org/r/20250718-01-k1-uart-binding-v1-1-a92e1e14c836@gentoo.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Document SCIF bindings for the Renesas RZ/V2N (a.k.a R9A09G056) SoC.
The SCIF interface in Renesas RZ/V2N is identical to the one available
in RZ/V2H(P), so `renesas,scif-r9a09g057` will be used as a fallback,
allowing reuse of the existing driver without modifications.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Acked-by: "Rob Herring (Arm)" <robh@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20250716202923.163950-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add bindings for the GPU present in Apple SoCs
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Sven Peter <sven@kernel.org>
Signed-off-by: Sasha Finkelstein <fnkl.kernel@gmail.com>
Link: https://lore.kernel.org/r/20250710-sgx-dt-v3-1-299bb3a65109@gmail.com
Signed-off-by: Sven Peter <sven@kernel.org>
|
|
Patches from Peter Chen <peter.chen@cixtech.com>:
Cixtech P1 (internal name sky1) is high performance generic Armv9 SoC.
Orion O6 is the Arm V9 Motherboard built by Radxa. You could find brief
introduction for SoC and related boards at:
https://radxa.com/products/orion/o6#overview
Currently, to run upstream kernel at Orion O6 board, you need to
use BIOS released by Radxa, and add "clk_ignore_unused=1" at bootargs.
https://docs.radxa.com/en/orion/o6/bios/install-bios
In this series, we add initial SoC and board support for Kernel building.
Since mailbox is used for SCMI clock communication, mailbox driver is added
in this series for the minimum SoC support.
Patch 1-2: add dt-binding doc for CIX and its sky1 SoC
Patch 3: add Arm64 build support
Patch 4-5: add CIX mailbox driver which needs to support SCMI clock protocol.
Patch 6: add Arm64 defconfig support
Patch 7-8: add initial dts support for SoC and Orion O6 board
Patch 9: add MAINTAINERS entry
* newsoc/cix-p1:
MAINTAINERS: Add CIX SoC maintainer entry
arm64: dts: cix: Add sky1 base dts initial support
dt-bindings: clock: cix: Add CIX sky1 scmi clock id
arm64: defconfig: Enable CIX SoC
mailbox: add CIX mailbox driver
dt-bindings: mailbox: add cix,sky1-mbox
arm64: Kconfig: add ARCH_CIX for cix silicons
dt-bindings: arm: add CIX P1 (SKY1) SoC
dt-bindings: vendor-prefixes: Add CIX Technology Group Co., Ltd.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Add a dt-binding for the Cixtech Mailbox Controller.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Peter Chen <peter.chen@cixtech.com>
Signed-off-by: Guomin Chen <Guomin.Chen@cixtech.com>
Signed-off-by: Lihua Liu <Lihua.Liu@cixtech.com>
Signed-off-by: Peter Chen <peter.chen@cixtech.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Add device tree bindings for CIX P1 (Internal name sky1) Arm SoC,
it consists several SoC models like CP8180, CD8180, etc.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Fugang Duan <fugang.duan@cixtech.com>
Signed-off-by: Peter Chen <peter.chen@cixtech.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
CIX Technology Group Co., Ltd. is a high performance Arm SoC design
company. Link: https://www.cixtech.com/.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Fugang Duan <fugang.duan@cixtech.com>
Signed-off-by: Peter Chen <peter.chen@cixtech.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Patches from Ben Zong-You Xie <ben717@andestech.com>:
The Voyager is a 9.6” x 9.6” Micro ATX form factor development board
including Andes QiLai SoC. This patch series adds minimal device tree
files for the QiLai SoC and the Voyager board [1].
Now only support basic uart drivers to boot up into a basic console. Other
features will be added later.
[1] https://www.andestech.com/en/products-solutions/andeshape-platforms/qilai-chip/
[2] https://lore.kernel.org/all/20250602060747.689824-1-ben717@andestech.com/
* newsoc/andes:
MAINTAINERS: Add entry for Andes SoC
riscv: defconfig: enable Andes SoC
riscv: dts: andes: add Voyager board device tree
riscv: dts: andes: add QiLai SoC device tree
dt-bindings: timer: add Andes machine timer
dt-bindings: interrupt-controller: add Andes machine-level software interrupt controller
dt-bindings: interrupt-controller: add Andes QiLai PLIC
dt-bindings: riscv: add Andes QiLai SoC and the Voyager board bindings
riscv: add Andes SoC family Kconfig support
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux into soc/dt
MediaTek ARM64 DeviceTree updates for v6.17
This adds new machines and improves support for already supported
MediaTek SoCs.
In particular:
- New machine: MT8186 Steelix Squirtle Chromebook
- Steelix-Voltorb's two dts are merged in one
...and improvements for already supported SoCs and machines:
- Added reserved memory for AFE DMA for MT8173/83/86/92,
aligning audio related memory allocation between all of
the Chromebook SoCs
- Added second source components for Steelix, and marked the
multiple trackpads for Asurada as such
- MediaTek Genio 1200: Enabled support for the Audio DSP and sound
- MediaTek Genio 510/700/1200: Added support for the PMIC Keys
- MediaTek MT7988: Added Cache Coherent Interconnect for CPU DVFS
- MT7988A-BananaPi-R4: Enabled CCI, added GPIO LEDs
- Airoha EN7581: Added ethernet nodes to Evaluation Board
* tag 'mtk-dts64-for-v6.17' of https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux:
arm64: dts: mediatek: mt8395-genio-1200-evk: Add MT6359 PMIC key support
arm64: dts: mediatek: mt8390-genio-common: Add Home MT6359 PMIC key support
arm64: dts: mediatek: mt7988a-bpi-r4: add gpio leds
arm64: dts: mediatek: mt7988a-bpi-r4: drop unused pins
arm64: dts: mediatek: mt7988a-bpi-r4: add proc-supply for cci
arm64: dts: mediatek: mt7988: add cci node
dt-bindings: interconnect: add mt7988-cci compatible
arm64: dts: airoha: en7581: Add ethernet nodes to EN7581 SoC evaluation board
arm64: dts: mediatek: mt8192-asurada-spherion: Mark trackpads as fail-needs-probe
arm64: dts: mediatek: mt8186: Add Squirtle Chromebooks
arm64: dts: mediatek: mt8186: Merge Voltorb device trees
arm64: dts: mediatek: mt8186-steelix: Mark second source components for probing
dt-bindings: arm: mediatek: Add MT8186 Squirtle Chromebooks
dt-bindings: arm: mediatek: Merge MT8186 Voltorb entries
arm64: dts: mediatek: mt8395-genio-1200-evk: Enable Audio DSP and sound card
arm64: dts: mediatek: mt8192-asurada: Reserve memory for audio frontend
arm64: dts: mediatek: mt8186-corsola: Reserve memory for audio frontend
arm64: dts: mediatek: mt8183-kukui: Reserve memory for audio frontend
arm64: dts: mediatek: mt8173: Reserve memory for audio frontend
Link: https://lore.kernel.org/r/20250711083656.33538-3-angelogioacchino.delregno@collabora.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux into soc/dt
MediaTek mach ARM32 updates
This adds support for the MediaTek MT6572 SoC, found in various
old smartphones and tablets from various manufacturers.
In particular, this adds a board_dt_compat entry for this SoC
and its SMP bring up sequence to enable secondary cores.
* tag 'mtk-dts32-for-v6.17' of https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux:
ARM: dts: mediatek: add basic support for Lenovo A369i board
ARM: dts: mediatek: add basic support for JTY D101 board
ARM: dts: mediatek: add basic support for MT6572 SoC
dt-bindings: arm: mediatek: add boards based on the MT6572 SoC
dt-bindings: vendor-prefixes: add JTY
dt-bindings: watchdog: mediatek,mtk-wdt: add MT6572
dt-bindings: interrupt-controller: mediatek,mt6577-sysirq: add MT6572
Link: https://lore.kernel.org/r/20250711083656.33538-2-angelogioacchino.delregno@collabora.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap into soc/dt
arm: dts: OMAP updates for v6.17
- new board support: Seeed BeagleBone Green Eco
- misc. fixups / cleanups
* tag 'omap-for-v6.17/dt-signed' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap:
arm: dts: ti: omap: Fixup pinheader typo
ARM: dts: am335x-pdu001: Fix RS-485 transceiver switching
arm: dts: omap: Add support for BeagleBone Green Eco board
dt-bindings: omap: Add Seeed BeagleBone Green Eco
arm: dts: omap: am335x-bone-common: Rename tps to generic pmic node
Revert "ARM: dts: Update pcie ranges for dra7"
ARM: dts: omap: am335x: Use non-deprecated rts-gpios
Link: https://lore.kernel.org/r/7h7c0gxczy.fsf@baylibre.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into soc/dt
STM32 DT for v6.17, round 1
Highlights:
----------
- MPU:
- STM32MP13:
-Add Ethernet MAC adress efuse support.
- STMP32MP15:
- Add stm32mp157f-DK2 board support. This board embedds the same
conectivity devices, DDR ... than stm32mp157c-dk2.
However there are two differences: STM32MP157F SoC which allows
overdrive OPP and the SCMI support for system features like
clocks and regulators.
- STM32MP25:
- Fix tick timer for low power use cases.
- Add timer support.
* tag 'stm32-dt-for-v6.17-1' of https://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32:
arm64: dts: st: remove empty line in stm32mp251.dtsi
arm64: dts: st: fix timer used for ticks
arm64: defconfig: Enable STM32 Octo Memory Manager and OcstoSPI driver
ARM: dts: stm32: add stm32mp157f-dk2 board support
dt-bindings: arm: stm32: add STM32MP157F-DK2 board compatible
ARM: dts: stm32: optee async notif interrupt for MP15 scmi variants
ARM: dts: stm32: use internal regulators bindings for MP15 scmi variants
dt-bindings: regulator: Add STM32MP15 SCMI regulator identifiers
ARM: dts: stm32: use 'typec' generic name for stusb1600 on stm32mp15xx-dkx
ARM: dts: stm32: fullfill diversity with OPP for STM32M15xF SOCs
ARM: dts: stm32: add system-clock-direction-out on stm32mp15xx-dkx
arm64: defconfig: enable STM32 timers drivers
arm64: dts: st: add timer nodes on stm32mp257f-ev1
arm64: dts: st: add timer pins for stm32mp257f-ev1
arm64: dts: st: add timer nodes on stm32mp251
ARM: dts: stm32: Add nvmem-cells to ethernet nodes for constant mac-addresses
Link: https://lore.kernel.org/r/b3e3363b-1ea5-457c-b244-2cbe26f7d6e4@foss.st.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt
New boards: ROC-RK3588S-PC, Luckfox Omni3576, Radxa Rock 5T,
Sakura Pi RK3308B - all of them have the used soc in their name.
New overlays: RockPro64 screen, optional Sige5 Wifi/BT module,
ethernet-switch addon for Jaguar.
Added peripherals on rk3528 (spi, power-domain controller, gpu)
and sdio controller on rk3576.
DSI display support for the Gameforce-ACE handheld, a fix for the
cover-detection (closed/open) on the PineNote, camera support for
the Haikou Video Demo overlay on PX30 Ringneck as well as a number
of other newly enabled peripherals on a number of boards.
* tag 'v6.17-rockchip-dts64-1' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (40 commits)
arm64: dts: rockchip: Enable eMMC HS200 mode on Radxa E20C
arm64: dts: rockchip: Add bluetooth support to ArmSoM Sige7
arm64: dts: rockchip: enable PCIe on ROCK 4D
arm64: dts: rockchip: Enable HDMI receiver on CM3588
arm64: dts: rockchip: Add HDMI PHY PLL clock source to VOP2 on rk3576
arm64: dts: rockchip: Enable HDMI PHY clk provider on rk3576
arm64: dts: rockchip: add DTs for Firefly ROC-RK3588S-PC
dt-bindings: arm: rockchip: Add Firefly ROC-RK3588S-PC
arm64: dts: rockchip: Enable GPU on Radxa E20C
arm64: dts: rockchip: Add GPU node for RK3528
arm64: dts: rockchip: support camera module on Haikou Video Demo on PX30 Ringneck
arm64: dts: rockchip: add label to first port of ISP on px30
arm64: dts: rockchip: fix endpoint dtc warning for PX30 ISP
arm64: dts: rockchip: Add power controller for RK3528
arm64: dts: rockchip: enable USB on Sige5
arm64: dts: rockchip: add overlay for the WiFi/BT module on Sige5 v1.2
arm64: dts: rockchip: add version-independent WiFi/BT nodes on Sige5
arm64: dts: rockchip: add SDIO controller on RK3576
arm64: dts: rockchip: Enable gpu on rk3576-evb1-v10
arm64: dts: rockchip: Update the PinePhone Pro panel description
...
Link: https://lore.kernel.org/r/15465458.uLZWGnKmhe@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bmc/linux into soc/dt
ASPEED devicetree updates for 6.17
Removed platforms:
- IBM's Swift BMC
New platforms:
- Meta's Santabarbara
Santabarbara is a compute node with an accelerator module
- NVIDIA's GB200NVL BMC
NVIDIA GB200 NVL72 connects 36 Grace CPUs and 72 Blackwell GPUs in an NVIDIA
NVLink-connected, liquid-cooled, rack-scale design.
Updated BMC platforms:
- Bletchley (Meta): GPIO hog names, remove ethernet-phy node, USB PD negotiation
- Catalina (Meta): Various sensors added, MCTP support for NIC management
- Harma (Meta): Various sensors added
- System1 (IBM): IPMB and various GPIO-related updates
- Yosemite4 (Meta): GPIO names for UART mux select lines
The System1 series includes a devicetree binding patch for IPMI IPMB devices.
* tag 'aspeed-6.17-devicetree-1' of https://git.kernel.org/pub/scm/linux/kernel/git/bmc/linux: (34 commits)
ARM: dts: aspeed: yosemite4: add gpio name for uart mux sel
ARM: dts: aspeed: santabarbara: Add Meta Santabarbara BMC
dt-bindings: arm: aspeed: add Meta Santabarbara board
ARM: dts: aspeed: bletchley: enable USB PD negotiation
ARM: dts: aspeed: lanyang: Fix 'lable' typo in LED nodes
ARM: dts: aspeed: harma: add mmc health
ARM: dts: aspeed: Harma: revise gpio bride pin for battery
ARM: dts: aspeed: harma: add ADC128D818 for voltage monitoring
ARM: dts: aspeed: harma: add fan board I/O expander
ARM: dts: aspeed: harma: add E1.S power monitor
ARM: dts: aspeed: catalina: Enable MCTP for frontend NIC management
ARM: dts: aspeed: Add device tree for Nvidia's GB200NVL BMC
dt-bindings: arm: aspeed: add Nvidia's GB200NVL BMC
ARM: dts: aspeed: catalina: Enable MCTP support for NIC management
ARM: dts: aspeed: catalina: Update CBC FRU EEPROM I2C bus and address
ARM: dts: aspeed: catalina: Enable multi-master on additional I2C buses
ARM: dts: aspeed: catalina: Remove INA238 and INA230 nodes
ARM: dts: aspeed: catalina: Add second source HSC node support
ARM: dts: aspeed: catalina: Add second source fan controller support
ARM: dts: aspeed: catalina: Add fan controller support
...
Link: https://lore.kernel.org/r/36d50489cac1fbae01ec699b742f6c6c459a01cb.camel@codeconstruct.com.au
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt
Renesas DT binding updates for v6.17 (take two)
- Document support for the Renesas Gray Hawk Single board with R-Car
V4M-7 (R8A779H2).
* tag 'renesas-dt-bindings-for-v6.17-tag2' of https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
dt-bindings: soc: renesas: Document R-Car V4M-7 Gray Hawk Single
Link: https://lore.kernel.org/r/cover.1752090400.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/dt
Samsung DTS ARM64 changes for v6.17
1. New SoC - Exynos2200 SoC - with basic nodes, pin controllers,
clock controllers and initial USB support. Add board using it:
Samsung Galaxy S22+ (SM-S906B), called G0S.
2. ExynosAutov920: Add CMU_HSI2 clock controller, remaining SPI nodes
3. Google GS101:
- Prepare to switching to architected timer, instead of Exynos MCT as
the primary one.
- Add secondary Maxim MAX77759 PMIC to Pixel boards, managing USB Type-C and
charger.
- Add incomplete description of the primary Samsung S2MPG10 PMIC.
Several bits, like regulators, are still missing, though.
- Add also secondary reboot-mode, via MAX77759 NVMEM.
- Switch the primary (SoC) reboot handler to Google specific
google,gs101-reboot which gives additional GS101 features (cold and
warm reboots).
This change will affect other users of this DTS, but to our
knowledge there is only Android, from which this change originates.
4. Exynos7870:
- Fix speed problems in USB gadget mode.
- Correct memory map to avoid crashes due to secure world.
* tag 'samsung-dt64-6.17' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
arm64: dts: exynos7870-j6lte: reduce memory ranges to base amount
arm64: dts: exynos7870-on7xelte: reduce memory ranges to base amount
arm64: dts: exynos7870: add quirk to disable USB2 LPM in gadget mode
arm64: dts: exynos: gs101: switch to gs101 specific reboot
arm64: dts: exynos: gs101-pixel-common: add main PMIC node
arm64: dts: exynos: gs101: ufs: add dma-coherent property
arm64: dts: exynos: gs101: add dm-verity-device-corrupted syscon-reboot-mode
arm64: dts: exynos: gs101-pixel-common: add nvmem-reboot-mode
arm64: dts: exynos: gs101-pixel-common: add Maxim MAX77759 PMIC
arm64: dts: exynos5433: Align i2c-gpio node names with dtschema
arm64: dts: exynos: gs101: Add 'local-timer-stop' to cpuidle nodes
arm64: dts: exynosautov920: Add DT node for all SPI ports
arm64: dts: exynosautov920: add CMU_HSI2 clock DT nodes
MAINTAINERS: add entry for Samsung Exynos2200 SoC
arm64: dts: exynos: add initial support for Samsung Galaxy S22+
arm64: dts: exynos: add initial support for exynos2200 SoC
dt-bindings: arm: samsung: document g0s board binding
Link: https://lore.kernel.org/r/20250709191523.171359-6-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
into soc/drivers
This pull request contains Broadcom SoCs drivers updates for 6.17,
please pull the following:
- Andrea adds the RP1 clock, pinctrl/pinconf/gpio and misc driver to
bind them all
* tag 'arm-soc/for-6.17/drivers' of https://github.com/Broadcom/stblinux:
pinctrl: rp1: Implement RaspberryPi RP1 pinmux/pinconf support
misc: rp1: RaspberryPi RP1 misc driver
pinctrl: rp1: Implement RaspberryPi RP1 gpio support
clk: rp1: Add support for clocks provided by RP1
dt-bindings: clock: Add RaspberryPi RP1 clock bindings
Link: https://lore.kernel.org/r/20250630190216.1518354-4-florian.fainelli@broadcom.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
We need the tty/serial fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add the DT binding documentation for Andes machine timer.
The RISC-V architecture defines a machine timer that provides a real-time
counter and generates timer interrupts. Andes machiner timer (PLMT0) is
the implementation of the machine timer, and it contains memory-mapped
registers (mtime and mtimecmp). This device supports up to 32 cores.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Ben Zong-You Xie <ben717@andestech.com>
Link: https://lore.kernel.org/r/20250711133025.2192404-6-ben717@andestech.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
interrupt controller
Add the DT binding documentation for Andes machine-level software
interrupt controller.
In the Andes platform such as QiLai SoC, the PLIC module is instantiated a
second time with all interrupt sources tied to zero as the software
interrupt controller (PLICSW). PLICSW can generate machine-level software
interrupts through programming its registers.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Ben Zong-You Xie <ben717@andestech.com>
Link: https://lore.kernel.org/r/20250711133025.2192404-5-ben717@andestech.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Add a new compatible string for Andes QiLai PLIC.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Ben Zong-You Xie <ben717@andestech.com>
Link: https://lore.kernel.org/r/20250711133025.2192404-4-ben717@andestech.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Add DT binding documentation for the Andes QiLai SoC and the
Voyager development board.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Ben Zong-You Xie <ben717@andestech.com>
Link: https://lore.kernel.org/r/20250711133025.2192404-3-ben717@andestech.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
soc/drivers
Reset controller updates for v6.17
* Support reset controllers on Kendryte K230 and SOPHGO CV1800B.
* Add RZ/V2N USB2PHY reset controller bindings
* Use auxiliary device creation helpers in reset-mpfs.
* Convert nxp,lcp1850-rgu and snps,dw-reset binding docs to DT schema.
* Enable reset-brcmstb(-rescal) on BCM2712.
* Fix a typo in the T-HEAD TH1520 Kconfig option
* tag 'reset-for-v6.17' of https://git.pengutronix.de/git/pza/linux:
dt-bindings: reset: Convert snps,dw-reset to DT schema
reset: brcmstb: Enable reset drivers for ARCH_BCM2835
reset: simple: add support for Sophgo CV1800B
dt-bindings: reset: sophgo: Add CV1800B support
reset: mpfs: use the auxiliary device creation
dt-bindings: reset: renesas,rzv2h-usb2phy: Document RZ/V2N SoC support
dt-bindings: reset: convert nxp,lpc1850-rgu.txt to yaml format
reset: thead: Fix TH1520 typo
reset: canaan: add reset driver for Kendryte K230
dt-bindings: reset: add support for canaan,k230-rst
Link: https://lore.kernel.org/r/20250710152513.1346298-1-p.zabel@pengutronix.de
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Merge series from Heiko Schocher <hs@denx.de>:
This series introduces the changes needed for trivial spi
based sensors from ABB, currently operated from userspace.
|
|
Add documentation for spi based ABB sensors, which are
currently operated from userspace.
Signed-off-by: Heiko Schocher <hs@denx.de>
Link: https://patch.msgid.link/20250719063355.73111-2-hs@denx.de
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
For the sake of consistency, use my kernel.org address in all Contact
records in sysfs-devices-power and sysfs-power, and in the power-domain
DT binding.
Signed-off-by: Rafael J. Wysocki <rafael@kernel.org>
Link: https://patch.msgid.link/5911353.DvuYhMxLoT@rjwysocki.net
|
