| Age | Commit message (Collapse) | Author |
|---|
|
Convert gpio-74xx-mmio.txt to yaml format.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20250604144631.1141430-1-Frank.Li@nxp.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Covert gpio-pisosr.txt to yaml format.
Additional changes:
- Add ref to spi-peripheral-props.yaml.
- Set ngpios max value to 32.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250522223742.516254-1-Frank.Li@nxp.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Chris Paterson <chris.paterson2@renesas.com>
Link: https://lore.kernel.org/0a264c102c615e0a1bec2e45cba180298643520c.1747222771.git.geert+renesas@glider.be
|
|
Merge series from James Clark <james.clark@linaro.org>:
DT and driver changes for DSPI on S32G platforms. First 3 commits are
fixes for various edge cases which also apply to other platforms.
Remaining commits add new S32G registers and device settings, some S32G
specific fixes and then finally add the DT compatibles and binding docs.
Tested in both host and target mode on S32G-VNP-RDB3 by transferring to
an external device over spi1 using spidev_test.c
|
|
This IP block has an interrupt. Add it and add it to the
example as well.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250512-bcmbca-peripherals-arm-v3-2-86f97ab4326f@linaro.org
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
|
|
The RP1 is a MFD that exposes its peripherals through PCI BARs. This
schema is intended as minimal support for the clock generator and
gpio controller peripherals which are accessible through BAR1.
Signed-off-by: Andrea della Porta <andrea.porta@suse.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20250529135052.28398-3-andrea.porta@suse.com
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
|
|
Add device tree bindings for the gpio/pin/mux controller that is part of
the RP1 multi function device, and relative entries in MAINTAINERS file.
Signed-off-by: Andrea della Porta <andrea.porta@suse.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20250529135052.28398-2-andrea.porta@suse.com
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
|
|
Add device tree bindings for the clock generator found in RP1 multi
function device, and relative entries in MAINTAINERS file.
Signed-off-by: Andrea della Porta <andrea.porta@suse.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20250529135052.28398-1-andrea.porta@suse.com
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
|
|
Convert himax,hx8357d.txt to yaml format.
Additional changes:
- add spi parent node in examples.
- ref to spi-peripheral-props.yaml.
- change himax,hx8357a to himax,hx8357 to align driver and existed dts.
- add himax,hx8369a and fallback to himax,hx8369.
- allow spi-cpha and spi-cpol to align existed dts.
- add im-gpios for interface selections.
- add reset-gpios.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20250602152814.949671-1-Frank.Li@nxp.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Allow resets property to fix below CHECK_DTB warning:
arch/arm/boot/dts/nxp/lpc/lpc4337-ciaa.dtb: lcd-controller@40008000 (arm,pl111): 'resets' does not match any of the regexes: 'pinctrl-[0-9]+'
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20250602144906.944866-1-Frank.Li@nxp.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Convert the sitronix,st7586 binding documentation from .txt to .yaml.
Also added a link to the datasheet while we are touching this.
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://lore.kernel.org/r/20250530-devicetree-convert-sitronix-st7586-to-yaml-v1-1-c132b512ec57@baylibre.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Allow lcd panel related property for imx28 and keep the same restriction
for other platform. It is legancy platform and set these property to
deprecated.
Fix below CHECK_DTB warnings:
arch/arm/boot/dts/nxp/mxs/imx28-apx4devkit.dtb: lcdif@80030000 (fsl,imx28-lcdif): 'display', 'display0' do not match any of the regexes: 'pinctrl-[0-9]+'
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20250529200520.798117-1-Frank.Li@nxp.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Add fsl,imx23-digctl.yaml for i.MX23 and i.MX28 to fix below CHECK_DTB
warning:
arch/arm/boot/dts/nxp/mxs/imx23-sansa.dtb: /apb@80000000/apbh-bus@80000000/digctl@8001c000:
failed to match any schema with compatible: ['fsl,imx23-digctl']
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20250528183549.694434-1-Frank.Li@nxp.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Merge series from cy_huang@richtek.com:
This patch series adds Richtek RTQ9124 1x30W audio amplifier support.
|
|
Merge series from Bram Vlerick <bram.vlerick@openpixelsystems.org>:
Add support for the ti,tas5753 to tas571x driver.
|
|
Merge series from Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>:
Make the WCD93xx codec drivers simpler using
devm_regulator_bulk_get_enable() and obtain missing VDD_PX supply on
wcd939x.
Context depends on fixes:
https://lore.kernel.org/r/20250526-b4-b4-asoc-wcd9395-vdd-px-fixes-v1-0-0b8a2993b7d3@linaro.org
|
|
The $id value has a double "//". Drop it.
Fixes: 9ca5a7d9d2e0 ("dt-bindings: soc: fsl: Add fsl,ls1028a-reset for reset syscon node")
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250507215903.2748698-1-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Document regulator compatible string for the 7" Raspberry Pi 720x1280 DSI
panel based on ili9881. This is the Raspberry Pi DSI Panel V2. The newer
Raspberry Pi 5" and 7" panels have a slightly different register map to
the original one and offers PWM backlight control.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Link: https://patch.msgid.link/20250609000748.1665219-1-marek.vasut+renesas@mailbox.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Document the ASoC Richtek RTQ9124 in existed RT9123 file.
Signed-off-by: ChiYuan Huang <cy_huang@richtek.com>
Link: https://patch.msgid.link/9921d64ce4d63c24499f92ef33a4ce7cb018c60b.1749454717.git.cy_huang@richtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The RADXA ROCK 5T is a single board computer aimed at industrial use.
Its design is similar to the ROCK 5B+, but it does away with one of the
USB-C PD inputs, and uses one combination USB3/SATA/PCIe PHY for an
additional second 2.5G PCIe network card instead of USB3.
Link: https://radxa.com/products/rock5/5t/
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Link: https://lore.kernel.org/r/20250520-add-rock5t-v2-1-1f1971850a20@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
This patch adds device tree binding support for
Sakura Pi RK3308B, with compatibility for the
Rockchip RK3308 SoC.
Link: https://docs.sakurapi.org/article/sakurapi-rk3308b/introduce
Signed-off-by: Hsun Lai <i@chainsx.cn>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20250521131108.5710-3-i@chainsx.cn
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Add vendor prefix for SakuraPi.org, which produces
development boards like the SakuraPi-RK3308B.
Link: https://docs.sakurapi.org
Signed-off-by: Hsun Lai <i@chainsx.cn>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250521131108.5710-2-i@chainsx.cn
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Emails to Jianlong Huang bounce since 9 months, so drop the person from
maintainers:
550 5.4.1 Recipient address rejected: Access denied.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/20250528104514.184122-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Add gain calibration support by a per-channel resistor value.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Angelo Dureghello <adureghello@baylibre.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20250606-wip-bl-ad7606-calibration-v9-4-6e014a1f92a2@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
There is no txt file for it, add yaml for invensense,itg3200 gyroscope
given existing driver and use in DTS.
Signed-off-by: Rodrigo Gobbi <rodrigo.gobbi.7@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20250527210308.4693-1-rodrigo.gobbi.7@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Straight forward conversion from spear-adc.txt into yaml format.
Signed-off-by: Rodrigo Gobbi <rodrigo.gobbi.7@gmail.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20250522204130.21604-1-rodrigo.gobbi.7@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Add devicetree bindings for ad4080 family.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Link: https://patch.msgid.link/20250516082630.8236-9-antoniu.miclaus@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Add a new compatible and related bindings for the fpga-based
AD408x AXI IP core, a variant of the generic AXI ADC IP.
The AXI AD408x IP is a very similar HDL (fpga) variant of the
generic AXI ADC IP, intended to control ad408x familiy.
Although there are some particularities added for extended
control of the ad408x devices such as the filter configuration.
Wildcard naming is used to match the naming of the published
firmware.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20250516082630.8236-5-antoniu.miclaus@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Allow clocks property to fix below CHECK_DTB warnings:
arch/arm/boot/dts/nxp/mxs/imx28-btt3-0.dtb: spi@80014000 (fsl,imx28-spi): Unevaluated properties are not allowed ('clocks' was unexpected)
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20250528222821.728544-1-Frank.Li@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Document S32G compatible strings. 's32g2' and 's32g3' use the same
driver so 's32g2' must follow 's32g3'. The SPI controller supports
target mode when the "spi-slave" flag is used so add an example.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Ciprian Marian Costea <ciprianmarian.costea@nxp.com>
Signed-off-by: Larisa Grigore <larisa.grigore@nxp.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Link: https://patch.msgid.link/20250522-james-nxp-spi-v2-12-bea884630cfb@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Make the PWM mode on the buck controllers configurable from devicetree.
Some boards require forced PWM mode to keep the supply ripple within
acceptable limits under light load conditions.
Signed-off-by: Martijn de Gouw <martijn.de.gouw@prodrive-technologies.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20250525071823.819342-1-martijn.de.gouw@prodrive-technologies.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Convert mxs-audio-sgtl5000.txt to yaml format.
Additional changes:
- Add compatible string:
bluegiga,apx4devkit-sgtl5000
denx,m28evk-sgtl5000
fsl,imx28-mbmx28lc-sgtl500
- Remove audio-routing from required list.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: "Rob Herring (Arm)" <robh@kernel.org>
Link: https://patch.msgid.link/20250528165755.692264-1-Frank.Li@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add tas5753 to ti,tas57xx devicetree bindings.
Signed-off-by: Bram Vlerick <bram.vlerick@openpixelsystems.org>
Link: https://patch.msgid.link/20250528-asoc-tas5753-support-v1-2-a50c3f6734ee@openpixelsystems.org
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Document VDD_PX supply on WCD9390 and WCD9395 audio codecs, which was
missed in original posting.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20250526-b4-asoc-wcd9395-vdd-px-v1-5-64d3cb60313b@linaro.org
Acked-by: "Rob Herring (Arm)" <robh@kernel.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt:
- Support for the FWFT SBI extension, which is part of SBI 3.0 and a
dependency for many new SBI and ISA extensions
- Support for getrandom() in the VDSO
- Support for mseal
- Optimized routines for raid6 syndrome and recovery calculations
- kexec_file() supports loading Image-formatted kernel binaries
- Improvements to the instruction patching framework to allow for
atomic instruction patching, along with rules as to how systems need
to behave in order to function correctly
- Support for a handful of new ISA extensions: Svinval, Zicbop, Zabha,
some SiFive vendor extensions
- Various fixes and cleanups, including: misaligned access handling,
perf symbol mangling, module loading, PUD THPs, and improved uaccess
routines
* tag 'riscv-for-linus-6.16-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (69 commits)
riscv: uaccess: Only restore the CSR_STATUS SUM bit
RISC-V: vDSO: Wire up getrandom() vDSO implementation
riscv: enable mseal sysmap for RV64
raid6: Add RISC-V SIMD syndrome and recovery calculations
riscv: mm: Add support for Svinval extension
RISC-V: Documentation: Add enough title underlines to CMODX
riscv: Improve Kconfig help for RISCV_ISA_V_PREEMPTIVE
MAINTAINERS: Update Atish's email address
riscv: uaccess: do not do misaligned accesses in get/put_user()
riscv: process: use unsigned int instead of unsigned long for put_user()
riscv: make unsafe user copy routines use existing assembly routines
riscv: hwprobe: export Zabha extension
riscv: Make regs_irqs_disabled() more clear
perf symbols: Ignore mapping symbols on riscv
RISC-V: Kconfig: Fix help text of CMDLINE_EXTEND
riscv: module: Optimize PLT/GOT entry counting
riscv: Add support for PUD THP
riscv: xchg: Prefetch the destination word for sc.w
riscv: Add ARCH_HAS_PREFETCH[W] support with Zicbop
riscv: Add support for Zicbop
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull more spi updates from Mark Brown:
"A small set of updates that came in during the merge window, we've
got:
- Some small fixes for the Broadcom and spi-pci1xxxx drivers
- A change to the QPIC SNAND driver to flag that the error correction
features are less useful than people might be expecting
- A new device ID for the SOPHGO SG2042
- The addition of Yang Shen as a Huawei maintainer"
* tag 'spi-v6.16-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: spi-qpic-snand: document the limited bit error reporting capability
spi: bcm63xx-hsspi: fix shared reset
spi: bcm63xx-spi: fix shared reset
MAINTAINERS: Update HiSilicon SFC driver maintainer
MAINTAINERS: Update HiSilicon SPI Controller driver maintainer
spi: dt-bindings: spi-sg2044-nor: Add SOPHGO SG2042
spi: spi-pci1xxxx: Fix Probe failure with Dual SPI instance with INTx interrupts
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux
Pull pwm fixes from Uwe Kleine-König:
"axi-pwmgen: Fix handling of external clock
The pwm-axi-pwmgen device is backed by an FPGA and can be synthesized
in different ways. Relevant here is that it can use one or two
external clock signals. These fix clock handling for the two clocks
case"
* tag 'pwm/for-6.16-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux:
pwm: axi-pwmgen: fix missing separate external clock
dt-bindings: pwm: adi,axi-pwmgen: Fix clocks
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt updates from Greg KH:
"Here is the big set of USB and Thunderbolt changes for 6.16-rc1.
Included in here are the following:
- USB offload support for audio devices.
I think this takes the record for the most number of patch series
(30+) over the longest period of time (2+ years) to get merged
properly.
Many props go to Wesley Cheng for seeing this effort through, they
took a major out-of-tree hacked-up-monstrosity that was created by
multiple vendors for their specific devices, got it all merged into
a semi-coherent set of changes, and got all of the different major
subsystems to agree on how this should be implemented both with
changes to their code as well as userspace apis, AND wrangled the
hardware companies into agreeing to go forward with this, despite
making them all redo work they had already done in their private
device trees.
This feature offers major power savings on embedded devices where a
USB audio stream can continue to flow while the rest of the system
is sleeping, something that devices running on battery power really
care about. There are still some more small tweaks left to be done
here, and those patches are still out for review and arguing among
the different hardware companies, but this is a major step forward
and a great example of how to do upstream development well.
- small number of thunderbolt fixes and updates, things seem to be
slowing down here (famous last words...)
- xhci refactors and reworking to try to handle some rough corner
cases in some hardware implementations where things don't always
work properly
- typec driver updates
- USB3 power management reworking and updates
- Removal of some old and orphaned UDC gadget drivers that had not
been used in a very long time, dropping over 11 thousand lines from
the tree, always a nice thing, making up for the 12k lines added
for the USB offload feature.
- lots of little updates and fixes in different drivers
All of these have been in linux-next for over 2 weeks, the USB offload
logic has been in there for 8 weeks now, with no reported issues"
* tag 'usb-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (172 commits)
ALSA: usb-audio: qcom: fix USB_XHCI dependency
ASoC: qdsp6: fix compile-testing without CONFIG_OF
usb: misc: onboard_usb_dev: fix build warning for CONFIG_USB_ONBOARD_DEV_USB5744=n
usb: typec: tipd: fix typo in TPS_STATUS_HIGH_VOLAGE_WARNING macro
USB: typec: fix const issue in typec_match()
USB: gadget: udc: fix const issue in gadget_match_driver()
USB: gadget: fix up const issue with struct usb_function_instance
USB: serial: pl2303: add new chip PL2303GC-Q20 and PL2303GT-2AB
USB: serial: bus: fix const issue in usb_serial_device_match()
usb: usbtmc: Fix timeout value in get_stb
usb: usbtmc: Fix read_stb function and get_stb ioctl
ALSA: qc_audio_offload: try to reduce address space confusion
ALSA: qc_audio_offload: avoid leaking xfer_buf allocation
ALSA: qc_audio_offload: rename dma/iova/va/cpu/phys variables
ALSA: usb-audio: qcom: Fix an error handling path in qc_usb_audio_probe()
usb: misc: onboard_usb_dev: Fix usb5744 initialization sequence
dt-bindings: usb: ti,usb8041: Add binding for TI USB8044 hub controller
usb: misc: onboard_usb_dev: Add support for TI TUSB8044 hub
usb: gadget: lpc32xx_udc: Use USB API functions rather than constants
usb: gadget: epautoconf: Use USB API functions rather than constants
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial updates from Greg KH:
"Here is the big set of tty and serial driver changes for 6.16-rc1.
A little more churn than normal in this portion of the kernel for this
development cycle, Jiri and Nicholas were busy with cleanups and
reviews and fixes for the vt unicode handling logic which composed
most of the overall work in here.
Major changes are:
- vt unicode changes/reverts/changes from Nicholas. This should help
out a lot with screen readers and others that rely on vt console
support
- lock guard additions to the core tty/serial code to clean up lots
of error handling logic
- 8250 driver updates and fixes
- device tree conversions to yaml
- sh-sci driver updates
- other small cleanups and updates for serial drivers and tty core
portions
All of these have been in linux-next for 2 weeks with no reported issues"
* tag 'tty-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (105 commits)
tty: serial: 8250_omap: fix TX with DMA for am33xx
vt: add VT_GETCONSIZECSRPOS to retrieve console size and cursor position
vt: bracketed paste support
vt: remove VT_RESIZE and VT_RESIZEX from vt_compat_ioctl()
vt: process the full-width ASCII fallback range programmatically
vt: make use of ucs_get_fallback() when glyph is unavailable
vt: add ucs_get_fallback()
vt: create ucs_fallback_table.h_shipped with gen_ucs_fallback_table.py
vt: introduce gen_ucs_fallback_table.py to create ucs_fallback_table.h
vt: move glyph determination to a separate function
vt: make sure displayed double-width characters are remembered as such
vt: ucs.c: fix misappropriate in_range() usage
serial: max3100: Replace open-coded parity calculation with parity8()
dt-bindings: serial: 8250_omap: Drop redundant properties
dt-bindings: serial: Convert socionext,milbeaut-usio-uart to DT schema
dt-bindings: serial: Convert microchip,pic32mzda-uart to DT schema
dt-bindings: serial: Convert arm,sbsa-uart to DT schema
dt-bindings: serial: Convert snps,arc-uart to DT schema
dt-bindings: serial: Convert marvell,armada-3700-uart to DT schema
dt-bindings: serial: Convert lantiq,asc to DT schema
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc / iio driver updates from Greg KH:
"Here is the big char/misc/iio and other small driver subsystem pull
request for 6.16-rc1.
Overall, a lot of individual changes, but nothing major, just the
normal constant forward progress of new device support and cleanups to
existing subsystems. Highlights in here are:
- Large IIO driver updates and additions and device tree changes
- Android binder bugfixes and logfile fixes
- mhi driver updates
- comedi driver updates
- counter driver updates and additions
- coresight driver updates and additions
- echo driver removal as there are no in-kernel users of it
- nvmem driver updates
- spmi driver updates
- new amd-sbi driver "subsystem" and drivers added
- rust miscdriver binding documentation fix
- other small driver fixes and updates (uio, w1, acrn, hpet,
xillybus, cardreader drivers, fastrpc and others)
All of these have been in linux-next for quite a while with no
reported problems"
* tag 'char-misc-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (390 commits)
binder: fix yet another UAF in binder_devices
counter: microchip-tcb-capture: Add watch validation support
dt-bindings: iio: adc: Add ROHM BD79100G
iio: adc: add support for Nuvoton NCT7201
dt-bindings: iio: adc: add NCT7201 ADCs
iio: chemical: Add driver for SEN0322
dt-bindings: trivial-devices: Document SEN0322
iio: adc: ad7768-1: reorganize driver headers
iio: bmp280: zero-init buffer
iio: ssp_sensors: optimalize -> optimize
HID: sensor-hub: Fix typo and improve documentation
iio: admv1013: replace redundant ternary operator with just len
iio: chemical: mhz19b: Fix error code in probe()
iio: adc: at91-sama5d2: use IIO_DECLARE_BUFFER_WITH_TS
iio: accel: sca3300: use IIO_DECLARE_BUFFER_WITH_TS
iio: adc: ad7380: use IIO_DECLARE_DMA_BUFFER_WITH_TS
iio: adc: ad4695: rename AD4695_MAX_VIN_CHANNELS
iio: adc: ad4695: use IIO_DECLARE_DMA_BUFFER_WITH_TS
iio: introduce IIO_DECLARE_BUFFER_WITH_TS macros
iio: make IIO_DMA_MINALIGN minimum of 8 bytes
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS updates from Thomas Bogendoerfer:
- Added support for EcoNet platform
- Added support for parallel CPU bring up on EyeQ
- Other cleanups and fixes
* tag 'mips_6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (23 commits)
MIPS: loongson2ef: lemote-2f: add missing function prototypes
MIPS: loongson2ef: cs5536: add missing function prototypes
MIPS: SMP: Move the AP sync point before the calibration delay
mips: econet: Fix incorrect Kconfig dependencies
MAINTAINERS: Add entry for newly added EcoNet platform.
mips: dts: Add EcoNet DTS with EN751221 and SmartFiber XP8421-B board
dt-bindings: vendor-prefixes: Add SmartFiber
mips: Add EcoNet MIPS platform support
dt-bindings: mips: Add EcoNet platform binding
MIPS: bcm63xx: nvram: avoid inefficient use of crc32_le_combine()
mips: dts: pic32: pic32mzda: Rename the sdhci nodename to match with common mmc-controller binding
MIPS: SMP: Move the AP sync point before the non-parallel aware functions
MIPS: Replace strcpy() with strscpy() in vpe_elfload()
MIPS: BCM63XX: Replace strcpy() with strscpy() in board_prom_init()
mips: ptrace: Improve code formatting and indentation
MIPS: SMP: Implement parallel CPU bring up for EyeQ
mips: Add -std= flag specified in KBUILD_CFLAGS to vdso CFLAGS
MIPS: Loongson64: Add missing '#interrupt-cells' for loongson64c_ls7a
mips: dts: realtek: Add MDIO controller
MIPS: txx9: gpio: use new line value setter callbacks
...
|
|
The kernel test robot reported a warning related to the use of "$ref"
type definitions for custom endpoint properties
- "ti,lvds-vod-swing-clock-microvolt" and
- "ti,lvds-vod-swing-data-microvolt".
Using "$ref" with "uint32-array" is not correctly handled in this
context. Removing "$ref" and relying solely on "maxItems: 2" enforces
the intended requirement of specifying exactly two values, without
triggering a schema validation warning.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202505021937.efnQPPqx-lkp@intel.com/
Signed-off-by: Andrej Picej <andrej.picej@norik.com>
Link: https://lore.kernel.org/r/20250529053654.1754926-1-andrej.picej@norik.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/alexghiti/linux into for-next
riscv patches for 6.16-rc1, part 2
* Performance improvements
- Add support for vdso getrandom
- Implement raid6 calculations using vectors
- Introduce svinval tlb invalidation
* Cleanup
- A bunch of deduplication of the macros we use for manipulating instructions
* Misc
- Introduce a kunit test for kprobes
- Add support for mseal as riscv fits the requirements (thanks to Lorenzo for making sure of that :))
[Palmer: There was a rebase between part 1 and part 2, so I've had to do
some more git surgery here... at least two rounds of surgery...]
* alex-pr-2: (866 commits)
RISC-V: vDSO: Wire up getrandom() vDSO implementation
riscv: enable mseal sysmap for RV64
raid6: Add RISC-V SIMD syndrome and recovery calculations
riscv: mm: Add support for Svinval extension
riscv: Add kprobes KUnit test
riscv: kprobes: Remove duplication of RV_EXTRACT_ITYPE_IMM
riscv: kprobes: Remove duplication of RV_EXTRACT_UTYPE_IMM
riscv: kprobes: Remove duplication of RV_EXTRACT_RD_REG
riscv: kprobes: Remove duplication of RVC_EXTRACT_BTYPE_IMM
riscv: kprobes: Remove duplication of RVC_EXTRACT_C2_RS1_REG
riscv: kproves: Remove duplication of RVC_EXTRACT_JTYPE_IMM
riscv: kprobes: Remove duplication of RV_EXTRACT_BTYPE_IMM
riscv: kprobes: Remove duplication of RV_EXTRACT_RS1_REG
riscv: kprobes: Remove duplication of RV_EXTRACT_JTYPE_IMM
riscv: kprobes: Move branch_funct3 to insn.h
riscv: kprobes: Move branch_rs2_idx to insn.h
Linux 6.15-rc6
Input: xpad - fix xpad_device sorting
Input: xpad - add support for several more controllers
Input: xpad - fix Share button on Xbox One controllers
...
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/alexghiti/linux into for-next
riscv patches for 6.16-rc1
* Implement atomic patching support for ftrace which finally allows to
get rid of stop_machine().
* Support for kexec_file_load() syscall
* Improve module loading time by changing the algorithm that counts the
number of plt/got entries in a module.
* Zicbop is now used in the kernel to prefetch instructions
[Palmer: There's been two rounds of surgery on this one, so as a result
it's a bit different than the PR.]
* alex-pr: (734 commits)
riscv: Improve Kconfig help for RISCV_ISA_V_PREEMPTIVE
MAINTAINERS: Update Atish's email address
riscv: hwprobe: export Zabha extension
riscv: Make regs_irqs_disabled() more clear
perf symbols: Ignore mapping symbols on riscv
RISC-V: Kconfig: Fix help text of CMDLINE_EXTEND
riscv: module: Optimize PLT/GOT entry counting
riscv: Add support for PUD THP
riscv: xchg: Prefetch the destination word for sc.w
riscv: Add ARCH_HAS_PREFETCH[W] support with Zicbop
riscv: Add support for Zicbop
riscv: Introduce Zicbop instructions
riscv/kexec_file: Fix comment in purgatory relocator
riscv: kexec_file: Support loading Image binary file
riscv: kexec_file: Split the loading of kernel and others
riscv: Documentation: add a description about dynamic ftrace
riscv: ftrace: support direct call using call_ops
riscv: Implement HAVE_DYNAMIC_FTRACE_WITH_CALL_OPS
riscv: ftrace: support PREEMPT
riscv: add a data fence for CMODX in the kernel mode
...
Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
Pull RTC updates from Alexandre Belloni:
"There are two new drivers this cycle. There is also support for a
negative offset for RTCs that have been shipped with a date set using
an epoch that is before 1970. This unfortunately happens with some
products that ship with a vendor kernel and an out of tree driver.
Core:
- support negative offsets for RTCs that have shipped with an epoch
earlier than 1970
New drivers:
- NXP S32G2/S32G3
- Sophgo CV1800
Drivers:
- loongson: fix missing alarm notifications for ACPI
- m41t80: kickstart ocillator upon failure
- mt6359: mt6357 support
- pcf8563: fix wrong alarm register
- sh: cleanups"
* tag 'rtc-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (39 commits)
rtc: mt6359: Add mt6357 support
rtc: test: Test date conversion for dates starting in 1900
rtc: test: Also test time and wday outcome of rtc_time64_to_tm()
rtc: test: Emit the seconds-since-1970 value instead of days-since-1970
rtc: Fix offset calculation for .start_secs < 0
rtc: Make rtc_time64_to_tm() support dates before 1970
rtc: pcf8563: fix wrong alarm register
rtc: rzn1: support input frequencies other than 32768Hz
rtc: rzn1: Disable controller before initialization
dt-bindings: rtc: rzn1: add optional second clock
rtc: m41t80: reduce verbosity
rtc: m41t80: kickstart ocillator upon failure
rtc: s32g: add NXP S32G2/S32G3 SoC support
dt-bindings: rtc: add schema for NXP S32G2/S32G3 SoCs
dt-bindings: at91rm9260-rtt: add microchip,sama7d65-rtt
dt-bindings: rtc: at91rm9200: add microchip,sama7d65-rtc
rtc: loongson: Add missing alarm notifications for ACPI RTC events
rtc: sophgo: add rtc support for Sophgo CV1800 SoC
rtc: stm32: drop unused module alias
rtc: s3c: drop unused module alias
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine updates from Vinod Koul:
"A fairly small update for the dmaengine subsystem. This has a new ARM
dmaengine driver and couple of new device support and few driver
changes:
New support:
- Renesas RZ/V2H(P) dma support for r9a09g057
- Arm DMA-350 driver
- Tegra Tegra264 ADMA support
Updates:
- AMD ptdma driver code removal and optimizations
- Freescale edma error interrupt handler support"
* tag 'dmaengine-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (27 commits)
dmaengine: idxd: Remove unused pointer and macro
arm64: dts: renesas: r9a09g057: Add DMAC nodes
dmaengine: sh: rz-dmac: Add RZ/V2H(P) support
dmaengine: sh: rz-dmac: Allow for multiple DMACs
irqchip/renesas-rzv2h: Add rzv2h_icu_register_dma_req()
dt-bindings: dma: rz-dmac: Document RZ/V2H(P) family of SoCs
dt-bindings: dma: rz-dmac: Restrict properties for RZ/A1H
dmaengine: idxd: Narrow the restriction on BATCH to ver. 1 only
dmaengine: ti: Add NULL check in udma_probe()
fsldma: Set correct dma_mask based on hw capability
dmaengine: idxd: Check availability of workqueue allocated by idxd wq driver before using
dmaengine: xilinx_dma: Set dma_device directions
dmaengine: tegra210-adma: Add Tegra264 support
dt-bindings: Document Tegra264 ADMA support
dmaengine: dw-edma: Add HDMA NATIVE map check
dmaegnine: fsl-edma: add edma error interrupt handler
dt-bindings: dma: fsl-edma: increase maxItems of interrupts and interrupt-names
dmaengine: ARM_DMA350 should depend on ARM/ARM64
dt-bindings: dma: qcom,bam: Document dma-coherent property
dmaengine: Add Arm DMA-350 driver
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy
Pull phy updates from Vinod Koul:
"As usual featuring couple of new driver and bunch of new device
support and some driver changes to Freescale, rockchip driver along
with couple of yaml binding conversions.
New Support:
- Qualcomm IPQ5424 qusb2 support, IPQ5018 uniphy-pcie driver
- Rockchip usb2 support for RK3562, RK3036 usb2 phy support
- Samsung exynos2200 eusb2 phy support and driver refactoring for
this support, exynos7870 USBDRD support
- Mediatek MT7988 xs-phy support
- Broadcom BCM74110 usb phy support
- Renesas RZ/V2H(P) usb2 phy support
Updates:
- Freescale phy rate claculation updates, i.MX95 tuning support
- Better error handling for amlogic pcie phy
- Rockchip color depth configuration and management support
- Yaml binding conversion for RK3399 Type-C and PCIe Phy"
* tag 'phy-for-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (77 commits)
phy: tegra: p2u: Broaden architecture dependency
phy: rockchip: inno-usb2: Add usb2 phy support for rk3562
dt-bindings: phy: rockchip,inno-usb2phy: add rk3562
phy: rockchip: inno-usb2: add phy definition for rk3036
dt-bindings: phy: rockchip,inno-usb2phy: add rk3036 compatible
phy: freescale: fsl-samsung-hdmi: Improve LUT search for best clock
phy: freescale: fsl-samsung-hdmi: Refactor finding PHY settings
phy: freescale: fsl-samsung-hdmi: Rename phy_clk_round_rate
phy: renesas: phy-rcar-gen3-usb2: Add USB2.0 PHY support for RZ/V2H(P)
phy: renesas: phy-rcar-gen3-usb2: Sort compatible entries by SoC part number
dt-bindings: phy: renesas,usb2-phy: Document RZ/V2H(P) SoC
dt-bindings: phy: renesas,usb2-phy: Add clock constraint for RZ/G2L family
phy: exynos5-usbdrd: support Exynos USBDRD 3.2 4nm controller
phy: phy-snps-eusb2: add support for exynos2200
phy: phy-snps-eusb2: refactor reference clock init
phy: phy-snps-eusb2: make reset control optional
phy: phy-snps-eusb2: make repeater optional
phy: phy-snps-eusb2: split phy init code
phy: phy-snps-eusb2: refactor constructs names
phy: move phy-qcom-snps-eusb2 out of its vendor sub-directory
...
|
|
Add compatible string for the Huiling hl055fhav028c. This panel is
based on the Himax HX8399C display controller which is extremely
similar to the existing HX8394. Add a new constant for
himax,hx8399c for this new display controller as well.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250603193930.323607-3-macroalpha82@gmail.com
|
|
Shenzhen Huiling Information Technology Co. Ltd. specializes in the
research and manufacturing of display and touch screens for industrial
usage. https://en.szhuiling.com/
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250603193930.323607-2-macroalpha82@gmail.com
|
|
Add AUO P238HAN01 23.8" 1920x1080 LVDS panel compatible string.
Signed-off-by: Michael Walle <mwalle@kernel.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250520074439.655749-1-mwalle@kernel.org
|
