summaryrefslogtreecommitdiff
path: root/Documentation/devicetree
AgeCommit message (Collapse)Author
2025-05-22Merge tag 'asoc-v6.16' of ↵Takashi Iwai
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next ASoC: Updates for v6.16 The changes in this release are quite large, mainly in drivers rather than the core. This is partly due to cleanups that touch a lot of drivers and partly due to several relatively large new drivers. - Support for automatically enumerating DAIs from standards conforming SoundWire SDCA devices, further work is required for these to be useful in an actual card. - Conversion of quite a few drivers to newer GPIO APIs. - More helpers and cleanups from Mormimoto-san. - Support for a wider range of AVS platforms. - Support for AMD ACP 7.x platforms, Cirrus Logic CS35L63 and CS48L32, Everest Semiconductor ES8389, Longsoon-1 AC'97 controllers, nVidia Tegra264, Richtek ALC203 and RT9123 and Rockchip SAI controllers.
2025-05-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR (net-6.15-rc8). Conflicts: 80f2ab46c2ee ("irdma: free iwdev->rf after removing MSI-X") 4bcc063939a5 ("ice, irdma: fix an off by one in error handling code") c24a65b6a27c ("iidc/ice/irdma: Update IDC to support multiple consumers") https://lore.kernel.org/20250513130630.280ee6c5@canb.auug.org.au No extra adjacent changes. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-05-22Merge tag 'icc-6.16-rc1' of ↵Greg Kroah-Hartman
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/djakov/icc into char-misc-next Georgi writes: interconnect changes for 6.16 This pull request contains the interconnect changes for the 6.16-rc1 merge window. The core and driver changes are listed below. Core changes: - Add support for dynamic id allocation, that allows creating multiple instances of the same provider Driver changes: - Add driver for the EPSS L3 instances on SA8775P SoC - Add QoS support for SM8650 SoC - Add some missing nodes for SM8650 - Misc dt-binding style and indentation fixes Signed-off-by: Georgi Djakov <djakov@kernel.org> * tag 'icc-6.16-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/djakov/icc: interconnect: qcom: sm8650: remove regmap config for mc_virt & clk_virt interconnect: qcom: sm8650: add the MASTER_APSS_NOC dt-bindings: interconnect: sm8650: document the MASTER_APSS_NOC interconnect: qcom: sm8650: enable QoS configuration dt-bindings: interconnect: Correct indentation and style in DTS example interconnect: qcom: sa8775p: Add dynamic icc node id support interconnect: qcom: icc-rpmh: Add dynamic icc node id support interconnect: qcom: Add multidev EPSS L3 support interconnect: core: Add dynamic id allocation support dt-bindings: interconnect: Add EPSS L3 compatible for SA8775P
2025-05-22Merge tag 'coresight-next-v6.16' of ↵Greg Kroah-Hartman
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/coresight/linux into char-misc-next Suzuki writes: coresight: updates for Linux v6.16 CoreSight self-hosted trace driver subsystem updates for Linux v6.16 includes: - Clear CLAIM tags on device probe if self-hosted tags are set. - Support for perf AUX pause/resume for CoreSight ETM PMU driver, with trace collection at pause. - Miscellaneous fixes for the subsystem Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> * tag 'coresight-next-v6.16' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/coresight/linux: (27 commits) coresight: prevent deactivate active config while enabling the config coresight: holding cscfg_csdev_lock while removing cscfg from csdev coresight/etm4: fix missing disable active config coresight: etm4x: Fix timestamp bit field handling coresight: tmc: fix failure to disable/enable ETF after reading Documentation: coresight: Document AUX pause and resume coresight: perf: Update buffer on AUX pause coresight: tmc: Re-enable sink after buffer update coresight: perf: Support AUX trace pause and resume coresight: etm4x: Hook pause and resume callbacks coresight: Introduce pause and resume APIs for source coresight: etm4x: Extract the trace unit controlling coresight: cti: Replace inclusion by struct fwnode_handle forward declaration coresight: Disable MMIO logging for coresight stm driver coresight: replicator: Fix panic for clearing claim tag coresight: Add a KUnit test for coresight_find_default_sink() coresight: Remove extern from function declarations coresight: Remove inlines from static function definitions coresight: Clear self hosted claim tag on probe coresight: etm3x: Convert raw base pointer to struct coresight access ...
2025-05-22Merge branches 'ib-firmware-mfd-6.16', 'ib-mfd-clocksource-pwm-6.16', ↵Lee Jones
'ib-mfd-gpio-nvmem-6.16', 'ib-mfd-regulator-6.16' and 'ib-mfd-regulator-6.16-1' into ibs-for-mfd-merged
2025-05-22Merge tag 'iio-for-6.16a-take2' of ↵Greg Kroah-Hartman
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next Jonathan writes: IIO: New device support, features and cleanup for 6.16 - take 2 Note - last minute rebase was to drop a typo patch that I'd accidentally picked up (in the microblaze arch Kconfig) Take 2 is due to that rebase messing up some fixes tags that were referring to patches after that point. There is a known merge conflict due to changes in neighbouring lines. Stephen's resolution in linux-next is: https://lore.kernel.org/linux-next/20250506155728.65605bae@canb.auug.org.au/ Added 3 named IIO reviewers to MAINTAINERS. This is a reflection of those who have been doing much of this work for some time. Lars-Peter is removed from the entry having moved on to other topics. Thanks Nuno, David and Andy for stepping up and Lars-Peter for all your hard work in the past! Includes the usual mix of new device support, features and general cleanup. This time we also have some tree wide changes. - Rip out the iio_device_claim_direct_scoped() as it proved hard to work with. This series includes quite a few related cleanups such as use of guard or factoring code out to allow direct returns. - Switch from iio_device_claim/release_direct_mode() to new iio_device_claim/release_direct() which is structured so that sparse can warn on failed releases. There were a few false positives but those were mostly in code that benefited from being cleaned up as part of this process. - Introduce iio_push_to_buffers_with_ts() to replace the _timestamp() version over time. This version takes the size of the supplied buffer which the core checks is at least as big as expected by calculation from channel descriptions of those channels enabled. Use this in an initial set of drivers. - Add macros for IIO_DECLARE_BUFFER_WITH_TS() and IIO_DECLARE_DMA_BUFFER_WITH_TS() to avoid lots of fiddly code to ensure correctly aligned buffers for timestamps being added onto the end of channel data. New device support ------------------ adi,ad3530r - New driver for AD3530, AD3530R, AD3531 and AD3531R DACs with programmable gain controls. R variants have internal references. adi,ad7476 - Add support (dt compatible only) for the Rohm BU79100G ADC which is fully compatible with the ti,ads7866. adi,ad7606 - Support ad7606c-16 and ad7606c-18 devices. Includes switch to dynamic channel information allocation. adi,ad7380 - Add support for the AD7389-4 dfrobot,sen0322 - New driver for this oxygen sensor. mediatek,mt2701-auxadc - Add binding for MT6893 which is fully compatible with already supported MT8173. meson-saradc - Support the GXLX SoCs. Mostly this is a workaround for some unrelated clock control bits found in the ADC register map. nuvoton,nct7201 - New driver for NCT7201 and NCT7202 I2C ADCs. rohm,bd79124 - New driver for this 12-bit, 8-channel SAR ADC. - Switch to new set_rv etc gpio callbacks that were added in 6.15. rohm,bd79703 - Add support for BD79700, BD79701 and BD79702 DACs that have subsets of functionality of the already supported bd79703. Included making this driver suitable for support device variants. st,stm32-lptimer - Add support for stm32pm25 to this trigger. Features -------- Beyond IIO - Property iterator for named children. core - Enable writes for 64 bit integers used for standard IIO ABI elements. Previously these could be read only. - Helper library that should avoid code duplication for simpler ADC bindings that have a child node per channel. - Enforce that IIO_DMA_MINALIGN is always at least 8 (almost always true and simplifies code on all significant architectures) core/backend - Add support to control source of data - useful when the HDL includes things like generated ramps for testing purposes. Enable this for adi-axi-dac adi,ad3552-hs - Add debugfs related callbacks to allow debug access to register contents. adi,ad4000 - Support SPI offload with appropriate FPGA firmware along with improving documentation. adi,ad7293 - Add support for external reference voltage. adi,ad7606 - Support SPI offload. adi,ad7768-1 - Support reset GPIO. adi,admv8818 - Support filter frequencies beyond 2^32. adi,adxl345 - Add single and double tap events. hid-sensor-prox - Support 16-bit report sizes as seen on some Intel platforms. invensense,icm42600 - Enable use of named interrupts to avoid problems with some wiring choices. Get the interrupt by name, but fallback to previous assumption on the first being INT1 if no names are supplied. microchip,mcp3911 - Add reset gpio support. rohm,bh7150 - Add reset gpio support. st,stm32 - Add support to control oversampling. ti,adc128s052 - Add support for ROHM BD79104 which is early compatible with the TI parts already supported by this driver. Includes some general driver cleanup and a separate dt binding. - Simplify reference voltage handling by assuming it is fixed after enabling the supply. winsen,mhz19b - New driver for this C02 sensor. Cleanup and minor fixes ----------------------- dt-bindings - Correct indentation and style for DTS examples. - Use unevalutateProperties for SPI devices instead of additionalProperties to allow generic SPI properties from spi-peripheral-props.yaml ABI Docs - Add missing docs for sampling_frequency when it applies only to events. Treewide - Various minor tweaks, comment fixes and similar. - Sort TI ADCs in Kconfig that had gotten out of order. - Switch various drives that provide GPIO chip functionality to the new callbacks with return values. - Standardize on { } formatting for all array sentinels. - Make use of aligned_s64 in a few places to replace either wrong types or manually defined equivalents. - Drop places where spi bits_per_word is set to 8 because that is the default anyway. adi,ad_sigma_delta library - Avoid a potential use of uninitialized data if reg_size has a value that is not supported (no drivers hit this but it is reasonable hardening) adi,ad4030 - Add error checking for scan types and no longer store it in state. - Rework code to reduce duplication. - Move setting the mode from buffer preenable() to update_scan_mode(), better matching expected semantics of the two different callbacks. - Improve data marshalling comments. adi,ad4695 - Use u16 for buffer elements as oversampling is not yet supported except with SPI offload (which doesn't use this path). adi,ad5592r - Clean up destruction of mutexes. - Use lock guards to simplify code (later patch fixes a missed unlock) adi,ad5933 - Correct some incorrect settling times. adi,ad7091 - Deduplicate handling of writable vs volatile registers as they are the inverse of each other for this device. adi,ad7124 - Fix 3db Filter frequency. - Remove ability to directly write the filter frequency (which was broken) - Register naming improvements. adi,ad7606 - Add a missing return value check. - Fill in max sampling rates for all chips. - Use devm_mutex_init() - Fix up some kernel-doc formatting issues. - Remove some camel case that snuck in. - Drop setting address field in channels as easily established from other fields. - Drop unnecessary parameter to ad76060_scale_setup_cb_t. adi,ad7768-1 - Convert to regmap. - Factor out buffer allocation. - Tidy up headers. adi,ad7944 - Stop setting bits_per_word in SPI xfers with no data. adi,ad9832 - Add of_device_id table rather than just relying on fallbacks. - Use FIELD_PREP() to set values of fields. adi,admv1013 - Cleanup a pointless ternary. adi,admv8818 - Fix up LPF Band 5 frequency which was slightly wrong. - Fix an integer overflow. - Fix range calculation adi,adt7316 - Replace irqd_get_trigger_type(irq_get_irq_data()) with simpler irq_get_trigger_type() adi,adxl345 - Use regmap cache instead of various state variables that were there to reduce bus accesses. - Make regmap return value checking consistent across all call sites. adi,axi-dac - Add a check on number of channels (0 to 15 valid) allwinner,sun20i - Use new adc-helpers to replace local parsing code for channel nodes. bosch,bmp290 - Move to local variables for sensor data marshalling removing the need for a messy definition that has to work for all supported parts. Follow up fix adds a missing initialization. dynaimage,al3010 and dynaimage,al3320a - Various minor cleanup to bring these drivers inline with reviewed feedback given on a new driver. - Fix an error path in which power down is not called when it should be. - Switch to regmap. google,cros_ec - Fix up a flexible array in middle of structure warning. - Flush fifo when changing the timeout to avoid potential long wait for samples. hid-sensor-rotation - Remove an __aligned(16) marking that doesn't seem to be justified. kionix,kxcjk-1013 - Deduplicate code for setting up interrupts. microchip,mcp3911 - Fix handling of conversion results register which differs across supported devices. idt,zopt2201 - Avoid duplicating register lists as all volatile registers are the inverse of writeable registers on this device. renesas,rzg2l - Use new adc-helpers to replace local parsing code for channel nodes. ti,ads1298 - Fix a missing Kconfig dependency. * tag 'iio-for-6.16a-take2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (260 commits) dt-bindings: iio: adc: Add ROHM BD79100G iio: adc: add support for Nuvoton NCT7201 dt-bindings: iio: adc: add NCT7201 ADCs iio: chemical: Add driver for SEN0322 dt-bindings: trivial-devices: Document SEN0322 iio: adc: ad7768-1: reorganize driver headers iio: bmp280: zero-init buffer iio: ssp_sensors: optimalize -> optimize HID: sensor-hub: Fix typo and improve documentation iio: admv1013: replace redundant ternary operator with just len iio: chemical: mhz19b: Fix error code in probe() iio: adc: at91-sama5d2: use IIO_DECLARE_BUFFER_WITH_TS iio: accel: sca3300: use IIO_DECLARE_BUFFER_WITH_TS iio: adc: ad7380: use IIO_DECLARE_DMA_BUFFER_WITH_TS iio: adc: ad4695: rename AD4695_MAX_VIN_CHANNELS iio: adc: ad4695: use IIO_DECLARE_DMA_BUFFER_WITH_TS iio: introduce IIO_DECLARE_BUFFER_WITH_TS macros iio: make IIO_DMA_MINALIGN minimum of 8 bytes iio: pressure: zpa2326_spi: remove bits_per_word = 8 iio: pressure: ms5611_spi: remove bits_per_word = 8 ...
2025-05-22Add Tegra264 support in AHUB driversMark Brown
Merge series from "Sheetal ." <sheetal@nvidia.com>: The patch series includes the necessary changes to enable support for the Tegra264 platforms in AHUB drivers.
2025-05-22dt-bindings: display: rockchip: Convert cdn-dp-rockchip.txt to yamlChaoyi Chen
Convert cdn-dp-rockchip.txt to yaml. Add new "port@1" property which represents the CDN DP output to keep the same style as the other display interfaces. This patch also changes the constraints for "phys" and "extcon". For the original binding, only one phy and the corresponding extcon can be specified. In the new binding, one or two phys can be specified. Since the RK3399 has two DP-USB PHYs, specifying one allows output via the corresponding PHY, while specifying two lets the driver choose one PHY for output. This rule also applies to extcon, which provides the cable state for the corresponding PHY. Signed-off-by: Chaoyi Chen <chaoyi.chen@rock-chips.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20250520024718.142-3-kernel@airkyi.com Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
2025-05-22dt-bindings: ASoC: Document Tegra264 APE supportSheetal
Add Tegra264 compatible strings to APE subsystem device bindings: - audio-graph-card: Due to different PLL clock rate. - admaif: Due to 32 channels supported and register offset changes. - i2s: Due to 32 channels supported and register offset changes. - amx/adx: Due to 32 channels supported and register offset changes. - asrc: Due to different ARAM address. - ahub: Due to AHUB IPs number of instances updates. - for future proofing the T264 compatibility is added for other device nodes. These bindings enable the enhanced audio features of Tegra264 while maintaining compatibility with existing platforms. Signed-off-by: Sheetal <sheetal@nvidia.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://patch.msgid.link/20250512051747.1026770-3-sheetal@nvidia.com Signed-off-by: Mark Brown <broonie@kernel.org>
2025-05-22dt-bindings: ASoC: admaif: Add missing propertiesSheetal
Add optional interconnect and iommu properties to admaif yaml. These properties are supported from Tegra186 SoC onwards. This fixes below dtbs_check error for Tegra194 and Tegra234: 'interconnect-names', 'interconnects', 'iommus' do not match any of the regexes: 'pinctrl-[0-9]+' Signed-off-by: Sheetal <sheetal@nvidia.com> Acked-by: "Rob Herring (Arm)" <robh@kernel.org> Link: https://patch.msgid.link/20250512051747.1026770-2-sheetal@nvidia.com Signed-off-by: Mark Brown <broonie@kernel.org>
2025-05-22dt-bindings: mfd: brcm,bcm59056: Add compatible for BCM59054Artur Weber
The BCM59054 MFD is fairly similar to the BCM59056, and will use the same driver. Add compatible and specify the allowed regulator nodes. Signed-off-by: Artur Weber <aweber.kernel@gmail.com> Reviewed-by: "Rob Herring (Arm)" <robh@kernel.org> Reviewed-by: Stanislav Jakubek <stano.jakubek@gmail.com> Link: https://lore.kernel.org/r/20250515-bcm59054-v9-2-14ba0ea2ea5b@gmail.com Signed-off-by: Lee Jones <lee@kernel.org>
2025-05-22dt-bindings: mfd: brcm,bcm59056: Convert to YAMLArtur Weber
Convert devicetree bindings for the Broadcom BCM59056 PMU MFD from TXT to YAML format. This patch does not change any functionality; the bindings remain the same. The bindings have been split into two parts: the MFD binding and a separate binding for the regulator node, to simplify the addition of other models later (which have different regulators). Signed-off-by: Artur Weber <aweber.kernel@gmail.com> Reviewed-by: "Rob Herring (Arm)" <robh@kernel.org> Reviewed-by: Stanislav Jakubek <stano.jakubek@gmail.com> Link: https://lore.kernel.org/r/20250515-bcm59054-v9-1-14ba0ea2ea5b@gmail.com Signed-off-by: Lee Jones <lee@kernel.org>
2025-05-22ASoC: dt-bindings: audio-graph-card2: reference audio-graph routing propertyKuninori Morimoto
audio-graph.yaml already has "routing" property, let's reference it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://patch.msgid.link/875xi4axln.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2025-05-22dt-bindings: leds: Add Texas Instruments TPS6131x flash LED driverMatthias Fend
Document Texas Instruments TPS61310/TPS61311 flash LED driver devicetree bindings. Signed-off-by: Matthias Fend <matthias.fend@emfend.at> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20250514-leds-tps6131x-v5-1-a4fb9e7f2c47@emfend.at Signed-off-by: Lee Jones <lee@kernel.org>
2025-05-21dt-bindings: net: Document support for Aeonsemi PHYsChristian Marangi
Add Aeonsemi PHYs and the requirement of a firmware to correctly work. Also document the max number of LEDs supported and what PHY ID expose when no firmware is loaded. Supported PHYs AS21011JB1, AS21011PB1, AS21010JB1, AS21010PB1, AS21511JB1, AS21511PB1, AS21510JB1, AS21510PB1, AS21210JB1, AS21210PB1 that all register with the PHY ID 0x7500 0x9410 on C45 registers before the firmware is loaded. Reviewed-by: Rob Herring (Arm) <robh@kernel.org> Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Link: https://patch.msgid.link/20250517201353.5137-7-ansuelsmth@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-05-22Merge tag 'qcom-arm64-for-6.16-2' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt More Qualcomm Arm64 DeviceTree updates for v6.16 Support for CPU frequency scaling is enabled on the X Elite platform. Also on X Elite, support for the HP EliteBook Ultra G1q is introduced. Support for the QCS6490 RB3gen2 Industrial Mezzanine is also added. PCIe controllers and PHYs are described and enabled across IPQ5018, IPQ5332, and IPQ5424. On IPQ9474 the missing MHI register range is added. The TCSR block is described and used to enable download mode flags on IPQ5018. The venus video encoder/decoder is enabled on the MSM8998-based Lenovo Miix 630 laptop. The crypto engine is enabled on QCM2290 and QCS615. Bluetooth is enabled on the QCM2210-based RB1 board. The Fairphone FP5 gains Displayport sound support. SAR2130P display nodes are added. On 8cx Gen3 the sensor remoteproc (SLPI) is introduced and this is enabled on Lenovo Thinkpad X13s and the CRD. The SDM845-based Samsung Galaxy S9 gains graphics, modem and initial sound support. On SDX75 the QPIC BAM and NAND support is added, and these are enabled on the IDP board. LLCC is added for SM8750. SM8550 gains Iris video decoder support. For X Elite, Lenovo ThinkPad T14s support for the SDX62 modem, as well as audio headset, is added. ASUS Vivobook S 15 gains Bluetooth support, Microsoft Surface Laptop 7 models gets support for DP over USB Type-C, HP Omnibook X 14 gains audio support. The devkit gets the USB multiport controller and the two USB Type-A ports described. Additionally a variety of Devicetree fixes are introduced, primarily identified through binding validation. * tag 'qcom-arm64-for-6.16-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (58 commits) arm64: dts: qcom: sm4450: Add RPMh power domains support arm64: dts: qcom: x1e80100-lenovo-yoga-slim7x: add retimers, dp altmode support arm64: dts: qcom: ipq5424: Enable PCIe PHYs and controllers arm64: dts: qcom: ipq5424: Add PCIe PHYs and controller nodes arm64: dts: qcom: sc7280: Mark FastRPC context banks as dma-coherent arm64: dts: qcom: sdx75-idp: Enable QPIC BAM & QPIC NAND support arm64: dts: qcom: sdx75: Add QPIC NAND support arm64: dts: qcom: sdx75: Add QPIC BAM support arm64: dts: qcom: qcm2290: Add crypto engine arm64: dts: qcom: x1e80100-vivobook-s15: Add bluetooth arm64: dts: qcom: x1e80100: Add PCIe lane equalization preset properties arm64: dts: qcom: qcs615: Fix up UFS clocks arm64: dts: qcom: sa8775p: Clean up the PSCI PDs arm64: dts: qcom: msm8996-oneplus: Add SLPI VDD_PX arm64: dts: qcom: sm6350-pdx213: Wire up USB regulators arm64: dts: qcom: msm8998-yoshino: Add QUSB2PHY VDD supply arm64: dts: qcom: msm8998-mtp: Add QUSB2PHY VDD supply arm64: dts: qcom: msm8998-fxtec: Add QUSB2PHY VDD supply arm64: dts: qcom: qcs615: Remove disallowed property from AOSS_QMP node arm64: dts: qcom: msm8998: Remove mdss_hdmi_phy phandle argument ... Link: https://lore.kernel.org/r/20250520024248.38904-1-andersson@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-05-22Merge tag 'mtk-dts64-for-v6.16-2' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux into soc/dt Additional MediaTek ARM64 DTS updates for v6.16 This addresses devicetree binding warnings happening on the MDP3 nodes in mt8188 dts, reverts the commit adding the SCP firmware-name as strongly suggested by Arnd, and also adds some more late commits. In particular: - MT6359 PMIC - Renamed PMIC RTC node to fix dtbs_check warning - MT7988(A) - Support for SPI controllers was added to SoC and BPI-R4 - Support for XSPHY, USB and PCIe2 was added as well - Fan and cooling maps were added to BPI-R4 machine - Added BananaPi R4 2G5 machine variant - MT8365 - Added touchscreen support to MT8365 Genio EVK - MT8188 - Addressed dtbs_check warnings for MDP3 nodes - MT8390 (Genio) - Reverted SCP firmware-name addition * tag 'mtk-dts64-for-v6.16-2' of https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux: (42 commits) Revert "arm64: dts: mediatek: mt8390-genio-common: Add firmware-name for scp0" arm64: dts: mediatek: mt8188: Address binding warnings for MDP3 nodes arm64: dts: mt6359: Rename RTC node to match binding expectations arm64: dts: mt8365-evk: Add goodix touchscreen support arm64: dts: mediatek: mt8188: Add missing #reset-cells property arm64: dts: airoha: en7581: Add PCIe nodes to EN7581 SoC evaluation board arm64: dts: airoha: en7581: Add gpio-ranges property for gpio controller arm64: dts: mediatek: mt7988a-bpi-r4: configure spi-nodes arm64: dts: mediatek: mt7988a-bpi-r4: Add fan and coolingmaps arm64: dts: mediatek: mt7988: add phy calibration efuse subnodes arm64: dts: mediatek: mt7988: move uart0 and spi1 pins to soc dtsi arm64: dts: mediatek: mt7988: add spi controllers arm64: dts: mediatek: mt7988a-bpi-r4: enable xsphy arm64: dts: mediatek: mt7988: Add xsphy for ssusb0/pcie2 arm64: dts: mediatek: mt7988a-bpi-r4: allow hw variants of bpi-r4 dt-bindings: arm: mediatek: add bpi-r4 2g5 phy variant arm64: dts: mt6359: Add missing 'compatible' property to regulators node arm/arm64: dts: mediatek: Add missing "#sound-dai-cells" to linux,bt-sco arm64: dts: mediatek: mt8390-genio-common: Set ssusb2 default dual role mode to host arm64: dts: mediatek: mt8395-genio-1200-evk: Disable unused backlight ... Link: https://lore.kernel.org/r/20250520114356.1194450-1-angelogioacchino.delregno@collabora.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-05-22Merge tag 'v6.16-rockchip-dts64-2' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt New SoC the RK3562 (4xA53, Mali-G52) with one evaluation board. New boards: - Cobra and PP1516 from Theobroma-Systems (build around the PX30) - Radxa Rock 5B+ (rk3588) - Rockchip RK3399 industrial eval board New peripherals: - GMAC + SDMMC/SDIO on rk3528 - SAI + HDMI-audio on rk3576 Interesting general updates: - move rk3528 i2c + uart aliases as requested - rk3568 PCIe3 MSI to use GIC ITS - update deprecated dwmac reset properties on some px30 boards - updates for cypress usb hubs on some Theobroma boards Binding taken with Greg's blessing https://lore.kernel.org/all/2025051550-polish-prude-ed56@gregkh/ * tag 'v6.16-rockchip-dts64-2' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (35 commits) arm64: dts: rockchip: Improve LED config for NanoPi R5S arm64: dts: rockchip: add px30-pp1516 base dtsi and board variants dt-bindings: arm: rockchip: add PX30-PP1516 boards from Theobroma Systems arm64: dts: rockchip: add px30-cobra base dtsi and board variants dt-bindings: arm: rockchip: add PX30-Cobra boards from Theobroma Systems arm64: dts: rockchip: move reset to dedicated eth-phy node on ringneck arm64: dts: rockchip: add basic mdio node to px30 arm64: dts: rockchip: disable unrouted USB controllers and PHY on RK3399 Puma with Haikou arm64: dts: rockchip: disable unrouted USB controllers and PHY on RK3399 Puma arm64: dts: rockchip: fix internal USB hub instability on RK3399 Puma dt-bindings: usb: cypress,hx3: Add support for all variants arm64: dts: rockchip: move rk3528 i2c+uart aliases to board files arm64: dts: rockchip: drop wrong spdif clock from edp1 on rk3588 arm64: dts: rockchip: Add RK3562 evb2 devicetree arm64: dts: rockchip: add core dtsi for RK3562 SoC dt-bindings: arm: rockchip: Add rk3562 evb2 board dt-bindings: soc: rockchip: Add rk3562 syscon compatibles dt-bindings: rockchip: pmu: Add rk3562 compatible arm64: dts: rockchip: Enable Ethernet controller on Radxa E20C arm64: dts: rockchip: Add GMAC nodes for RK3528 ... Link: https://lore.kernel.org/r/3998939.iIbC2pHGDl@phil Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-05-21Merge tag 'sunxi-dt-for-6.16' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into soc/dt Allwinner device tree changes for 6.16 Introduce Allwinner A523 / A527 / T527 SoC family w/ three new devices: - Radxa Cubie A5E - X96Q-Pro+ - Avaota-A1 Also enable EMAC0 ethernet MAC on A523 family for Cubie A5E & Avaota-A1. Note: the SoC has two different ethernet controllers. Changes to existing SoCs: - Enable GPU on H616 with all boards enabled - Set maximum MMC frequency for the A100 Changes to existing boards: - Add WiFi/BT header on PINE64 A64 boards - Add hp-det-gpios for Anbernic RG35XX - Add support for PHY LEDs on Bananapi (the original one) Add new devices for existing SoCs: - YuzukiHD Chameleon based on H6 - Liontron H-A133L based on A133 (compatible with A100) Tree wide cleanups: - Use preferred node names for cooling maps - Align wifi node name with bindings - Drop spurious 'clock-latency-ns' properties for H5 & H6 * tag 'sunxi-dt-for-6.16' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: (27 commits) arm64: dts: allwinner: a100: add Liontron H-A133L board support dt-bindings: arm: sunxi: Add Liontron H-A133L board name dt-bindings: vendor-prefixes: Add Liontron name ARM: dts: bananapi: add support for PHY LEDs arm64: dts: allwinner: a100: set maximum MMC frequency arm64: dts: allwinner: t527: add EMAC0 to Avaota-A1 board arm64: dts: allwinner: a527: add EMAC0 to Radxa A5E board arm64: dts: allwinner: a523: Add EMAC0 ethernet MAC dt-bindings: sram: sunxi-sram: Add A523 compatible arm64: dts: allwinner: a64: Add WiFi/BT header on SOPINE Baseboard arm64: dts: allwinner: a64: Add WiFi/BT header on PINE A64 arm64: dts: allwinner: correct the model name for Radxa Cubie A5E ARM: dts: allwinner: Align wifi node name with bindings arm64: dts: allwinner: Align wifi node name with bindings arm64: dts: allwinner: h616: enable Mali GPU for all boards arm64: dts: allwinner: h616: Add Mali GPU node arm64: dts: allwinner: h700: Add hp-det-gpios for Anbernic RG35XX arm64: dts: allwinner: h5/h6: Drop spurious 'clock-latency-ns' properties arm/arm64: dts: allwinner: Use preferred node names for cooling maps arm64: dts: allwinner: h616: add YuzukiHD Chameleon support ... Link: https://lore.kernel.org/r/aCaeZJ2t4S_xhgjp@wens.tw Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-05-21Merge tag 'stm32-dt-for-v6.16-1' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into soc/dt STM32 DT for v6.16, round 1 Highlights: ---------- - MCU: - Add low power timer on STM32F746 - Add STM32H747 High end MCU support. It embeds: - dual-core (Cortex-M7 + Cortex-M4) - up to 2 Mbytes flash - 1 Mbyte of internal RAM - Add STM32H747i-disco board support. Detailed information can be found at: https://www.st.com/en/evaluation-tools/stm32h747i-disco.html - MPU: - STM32MP13: - Add VREFINT calibration support based on ADC. - STMP32MP15: - Add new Ultratronik Fly board support: - based on STM32MP157C SoC - 1GB of DDR3 - Several connections are available on this boards: 2*USB2.0, 1*USB2.0 MiniUSB, Debug UART, 1*UART, 1*USART, SDcard, RJ45, ... - STM32MP25: - Add OCTOSPI support on STM32MP25 SoCs - Add SPI NOR flash support on STM32MP257F-EV1 connected to OSPI1 - Add Low power timer TIMER (LPTIM) on STM32MP25 SoCs and use LPTIM3 as low power broadcast timer on STM32MP257F-EV1. * tag 'stm32-dt-for-v6.16-1' of https://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: (22 commits) ARM: dts: stm32: add initial support for stm32mp157-ultra-fly-sbc board MAINTAINERS: Add entry for ULTRATRONIK BOARD SUPPORT dt-bindings: arm: stm32: Document Ultratronik's Fly board DT binding dt-bindings: vendor-prefixes: Add Ultratronik arm64: dts: st: use lptimer3 as tick broadcast source on stm32mp257f-ev1 arm64: dts: st: add low-power timer nodes on stm32mp251 arm64: defconfig: enable STM32 LP timer clockevent driver arm64: dts: st: Add SPI NOR flash support on stm32mp257f-ev1 board arm64: dts: st: Add ospi port1 pinctrl entries in stm32mp25-pinctrl.dtsi arm64: dts: st: Add OMM node on stm32mp251 ARM: dts: stm32: support STM32h747i-disco board ARM: dts: stm32: add an extra pin map for USART1 on stm32h743 ARM: dts: stm32: add pin map for UART8 controller on stm32h743 ARM: dts: stm32: add uart8 node for stm32h743 MCU dt-bindings: clock: stm32h7: rename USART{7,8}_CK to UART{7,8}_CK ARM: stm32: add a new SoC - STM32H747 dt-bindings: arm: stm32: add compatible for stm32h747i-disco board ARM: dts: stm32h7-pinctrl: add _a suffix to u[s]art_pins phandles ARM: dts: st: stm32: Align wifi node name with bindings ARM: dts: stm32: add low power timer on STM32F746 ... Link: https://lore.kernel.org/r/2f101efb-6d58-48d8-983a-57e30a34827c@foss.st.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-05-21Merge tag 'spacemit-dt-for-6.16-1' of https://github.com/spacemit-com/linux ↵Arnd Bergmann
into soc/dt RISC-V SpacemiT DT changes for 6.16 - Add clock driver, fix for pinctrl/uart - Add gpio support, enable LED heartbeat * tag 'spacemit-dt-for-6.16-1' of https://github.com/spacemit-com/linux: riscv: dts: spacemit: add gpio LED for system heartbeat riscv: dts: spacemit: add gpio support for K1 SoC riscv: dts: spacemit: Acquire clocks for UART riscv: dts: spacemit: Acquire clocks for pinctrl riscv: dts: spacemit: Add clock tree for SpacemiT K1 dt-bindings: clock: spacemit: Add spacemit,k1-pll dt-bindings: soc: spacemit: Add spacemit,k1-syscon Link: https://lore.kernel.org/r/20250514044841-GYA524674@gentoo Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-05-21Merge tag 'dt-vt8500-6.16' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-dt into soc/dt VT8500 DTS ARM changes for v6.16 1. New board: VIA APC Rock/Paper. 2. Add SCC ID register/socinfo node. 3. List all timer interrupts. * tag 'dt-vt8500-6.16' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-dt: ARM: dts: vt8500: list all four timer interrupts ARM: dts: vt8500: add DT nodes for the system config ID register ARM: dts: vt8500: Add VIA APC Rock/Paper board dt-bindings: arm: vt8500: Add VIA APC Rock/Paper boards Link: https://lore.kernel.org/r/20250513104216.25803-5-krzysztof.kozlowski@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-05-21Merge tag 'qcom-arm64-for-6.16' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt Qualcomm Arm64 DeviceTree updates for v6.16 The Snapdragon X Plus platform and related reference device is introduced. Devicetree for the Xiaomi Redmi Note 8 is added. Tsens and thermal zones are added for IPQ5332 and IPQ5424. IPQ6018 gains 1.2GHz and 1.5GHz CPU frequencies. The IPQ5424 gains MMC, LEDs and buttons, while the IPQ9574 gains NSS clock controller and SPI NAND support. IPQ6018 SMEM is transitioned to be described directly in the reserved-memory node. Display and GPU are enabled in the QCM6490-based Fairphone FP5. On QCS6490 Rb3Gen2 ADC channels for thermal profiling are added and Bluetooth is enabled. The USB Type-C orientation GPIO is added on the QCS6490 Rb3Gen2 and the vision mezzanine is described. The Fairphone FP5 gains touchscreen and USB Type-C display support, and the QCM6490 IDP board gains a required listed of protected clocks. The camera subsystem in SC7280 is described and UFS is transitioned to use operating points. On MSM8916, MSM8919 and MSM8939, and devices on these platforms, the UART pinctrl state is cleaned up. The MSM8953 platform gains another UART and interconnects. On SA8775P CTCU and ETR nodes are added, and the CPUfreq throttling interrupts are added. Samsung Galaxy S9 SM-G9600 gains a description of the MAX77705 used for charging, fuel gauge, haptic, and LED, as well as the PMIC used for display and touchscreen, which then is used to enable the touchscreen. The LPG/PWM node is added to PM8937 and Xiaomi Redmi 5A gains display backlight control. Display and GPU are enabled for the Nothing Phone (1). QCS615 platform gains command DB definition. The QCS8300 platform gains description of more QUP instances, CPUfreq, PCIe SMMU and the SPMI controller. On SAR2130P PCIe EP device nodes are added. On SDM630 missing resets are added for SDCC. Then on Fairphone FP3 modem is enabled, and firmware-path are defined on ADSP and WCNSS. The SDM845 RB3/DragonBoard845c and the QRB5165 RB5 has the sensors DSP enabled, and the vision mezzanine on both gets their CMA configuration cleaned up. Xiaomi Pocophone F1 gains touchscreen support. On the SM7325 Nothing Phone (1), display, GPU, and camera EEPROMs are described. On SM8450 the PCIe endpoint controller is described. For SM8550 OPP tables are described for PCIe and QUP. SM8750 gains RPMh sleep stats. SM8650 gians OSM L3 scaling and variety of OPP tables and missing interconnect definitions. The thermal trip points for CPU cores and GPU are raised in reliance on hardware throttling. SM8650 is also transitioned to per-CPU interrupt partitions, in order to properly describe the PMU interrupts. Missing Coresight ETE instances are added. On SM8750 the cluster idle states are corrected, then audio and compute DSPs are introduced, together with the crypto and rng blocks. Modem support is added and enabled on MTP and QRD devices. On SC8280XP overlays are introduced for those running Linux at EL2 on these devices. A few more temp-alarm instances are added for the PMICs. On the X Elite platform GPU cooling and watchdog is introduced, together with a number of smaller fixes. Dell XPS13 gains support for USB Type-C display, the QCP gains WiFi/BT power sequence, and a few devices learns about HBR3. The RTC support is enabled and regulators that are feeding resources that should be always on is marked as such on a variety of boards. The Lenovo Thinkpad T14s DeviceTree is split in two, in order to describe the LCD and OLED variants. Missing properties for the crypto BAM is introduced on a variety of platforms, taking care of a long standing error message in the kernel log during boot. DSI phy clock ids are transitioned to use identifiers from the PHY header file and VBIF region size is corrected, across a large number of platforms. A couple of DWC3 quirks are added across a lot of platforms. The arm32-for-6.15 pull request was accidentally merged into the arm64-for-6.16 branch and this wasn't discovered until a significant number of commits would have to be rebased. As such this is kept here as well. * tag 'qcom-arm64-for-6.16' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (308 commits) arm64: dts: qcom: sdm845-xiaomi-beryllium-ebbg: introduce touchscreen support arm64: dts: qcom: sdm845-xiaomi-beryllium-tianma: introduce touchscreen support arm64: dts: qcom: sdm845-xiaomi-beryllium-common: add touchscreen related nodes arm64: dts: qcom: qcs8300: add the pcie smmu node arm64: dts: qcom: x1e80100-*: Drop useless DP3 compatible override arm64: dts: qcom: msm8953: Add interconnects arm64: dts: qcom: msm8953: Add uart_5 arm64: dts: qcom: sm8350: Use q6asm defines for reg arm64: dts: qcom: sm7325-nothing-spacewar: Use q6asm defines for reg arm64: dts: qcom: sdm850*: Use q6asm defines for reg arm64: dts: qcom: sdm845*: Use q6asm defines for reg arm64: dts: qcom: sc7280: Use q6asm defines for reg arm64: dts: qcom: sc7180-acer-aspire1: Use q6asm defines for reg arm64: dts: qcom: qrb5165-rb5: Use q6asm defines for reg arm64: dts: qcom: msm8996*: Use q6asm defines for reg arm64: dts: qcom: msm8953: Use q6asm defines for reg arm64: dts: qcom: msm8916-modem-qdsp6: Use q6asm defines for reg arm64: dts: qcom: apq8096-db820c: Use q6asm defines for reg arm64: dts: qcom: qcm6490-fairphone-fp5: Hook up DisplayPort over USB-C arm64: dts: qcom: qcm6490-fairphone-fp5: Add OCP96011 audio switch ... Link: https://lore.kernel.org/r/20250511235241.15192-1-andersson@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-05-21Merge tag 'qcom-drivers-for-6.16-2' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers More Qualcomm driver updates for v6.16 Allow HP EliteBook Ultra G1q to use QSSECOM for UEFI variable acecss. Add missing compatible for IPQ5018 TCSR block. Fix a kernel-doc warning in SCM driver. * tag 'qcom-drivers-for-6.16-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: docs: firmware: qcom_scm: Fix kernel-doc warning firmware: qcom: scm: Allow QSEECOM for HP EliteBook Ultra G1q dt-bindings: mfd: qcom,tcsr: Add compatible for ipq5018 Link: https://lore.kernel.org/r/20250520024916.39712-1-andersson@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-05-21Merge tag 'riscv-cache-for-v6.16' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into soc/drivers RISC-V cache drivers for v6.16 SiFive: Add support for the Eswin EIC7700 SoC, which needs to make sure of the non-standard cache-ops provided by the ccache driver. Bindings: Conversions for two Marvell bindings to yaml, and additions of two soc-specific compatibles to the axm45mp bindings. Signed-off-by: Conor Dooley <conor.dooley@microchip.com> * tag 'riscv-cache-for-v6.16' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux: dt-bindings: cache: add QiLai compatible to ax45mp dt-bindings: cache: Convert marvell,tauros2-cache to DT schema dt-bindings: cache: Convert marvell,{feroceon,kirkwood}-cache to DT schema dt-bindings: cache: add specific RZ/Five compatible to ax45mp cache: sifive_ccache: Add ESWIN EIC7700 support dt-bindings: cache: sifive,ccache0: Add ESWIN EIC7700 SoC compatibility Link: https://lore.kernel.org/r/20250516-liability-facility-667fc14a2a85@spud Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-05-21Merge tag 'samsung-drivers-6.16-2' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/drivers Samsung SoC drivers for v6.16, part two Add CPU hotplug support on Google GS101 by toggling respective bits in secondary PMU intr block (Power Management Unit (PMU) Interrupt Generation) from the main PMU driver. * tag 'samsung-drivers-6.16-2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: soc: samsung: exynos-pmu: enable CPU hotplug support for gs101 MAINTAINERS: Add google,gs101-pmu-intr-gen.yaml binding file dt-bindings: soc: samsung: exynos-pmu: gs101: add google,pmu-intr-gen phandle dt-bindings: soc: google: Add gs101-pmu-intr-gen binding documentation Link: https://lore.kernel.org/r/20250516082037.7248-2-krzysztof.kozlowski@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-05-21dt-bindings: spi: samsung: add exynosautov920-spi compatibleFaraz Ata
Add "samsung,exynosautov920-spi" dedicated compatible for SPI found in ExynosAutov920 SoC. Signed-off-by: Faraz Ata <faraz.ata@samsung.com> Link: https://patch.msgid.link/20250521084324.2759530-1-faraz.ata@samsung.com Signed-off-by: Mark Brown <broonie@kernel.org>
2025-05-21mailmap: update and consolidate Casey Connolly's name and emailCasey Connolly
I've used several email addresses and a previous name to contribute. Consolidate all of these to my primary email and update my name. Link: https://lkml.kernel.org/r/20250517223237.15647-2-casey.connolly@linaro.org Signed-off-by: Casey Connolly <casey.connolly@linaro.org> Cc: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2025-05-21Merge tag 'riscv-sophgo-soc-for-v6.16' of https://github.com/sophgo/linux ↵Arnd Bergmann
into soc/drivers RISC-V SoC for v6.16 Sophgo: Add support for SG2044 TOP syscon device. The SG2044 TOP device provide PLL clock function in its area. Add RTC support for CV1800 series SoC. The device is called RTC, but contains control registers of other HW blocks in its address space, most notably of Power-on-Reset (PoR) module, DW8051 IP (MCU core), accompanying SRAM, hence putting it in SoC subsystem. Signed-off-by: Chen Wang <unicorn_wang@outlook.com> * tag 'riscv-sophgo-soc-for-v6.16' of https://github.com/sophgo/linux: soc: sophgo: cv1800: rtcsys: New driver (handling RTC only) dt-bindings: soc: sophgo: add RTC support for Sophgo CV1800 series soc: sophgo: sg2044: Add support for SG2044 TOP syscon device Link: https://lore.kernel.org/r/MA0P287MB2262B041A26A0F5EAD1E296CFE91A@MA0P287MB2262.INDP287.PROD.OUTLOOK.COM Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-05-21Merge tag 'qcom-drivers-for-6.16' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers Qualcomm driver updates for v6.16 Allow list QSEECOM for EFI variable services on on the Asus Zenbook A14, and block list TZMEM on the SM7150 platform to avoid issues with rmtfs. Extend the last-level cache (llcc) driver to support version 6 of the hardware and enable SM8750 support. Also add socinfo for the SM8750 platform. Re-enable UCSI support on SC8280XP, now that the reported crash has been dealt with, and filter the altmode notifications to avoid spurious hotplug events being propagated to user space. Add SM7150 support to pd-mapper. * tag 'qcom-drivers-for-6.16' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: soc: qcom: llcc-qcom: Add support for SM8750 soc: qcom: llcc-qcom: Add support for LLCC V6 dt-bindings: cache: qcom,llcc: Document SM8750 LLCC block soc: qcom: socinfo: add SM8750 SoC ID dt-bindings: arm: qcom,ids: add SoC ID for SM8750 dt-bindings: soc: qcom: qcom,rpm: add missing clock/-names properties dt-bindings: soc: qcom,rpm: add missing clock-controller node soc: qcom: smem: Update max processor count firmware: qcom: tzmem: disable sm7150 platform soc: qcom: pd-mapper: Add support for SM7150 soc: qcom: pmic_glink_altmode: fix spurious DP hotplug events soc: qcom: smp2p: Fix fallback to qcom,ipc parse soc: qcom: pmic_glink: enable UCSI on sc8280xp firmware: qcom: scm: Allow QSEECOM on Asus Zenbook A14 dt-bindings: soc: qcom,rpmh-rsc: Limit power-domains requirement Link: https://lore.kernel.org/r/20250513215656.44448-1-andersson@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-05-21Merge tag 'soc-drivers-6.16' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-dt into soc/drivers VT8500 (and FSL) SoC drivers for v6.16 1. VT8500: Add SCC socinfo/hwinfo driver. 2. Cleanup unused function in PowerPC Freescale QE driver to have W=1 builds warnings free. * tag 'soc-drivers-6.16' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-dt: soc: fsl: qe: remove unused qe_ic_from_irq function ARM: vt8500: MAINTAINERS: Include vt8500 soc driver in maintainers entry soc: Add VIA/WonderMedia SoC identification driver dt-bindings: hwinfo: Add VIA/WonderMedia SoC identification Link: https://lore.kernel.org/r/20250513104216.25803-6-krzysztof.kozlowski@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-05-21Merge tag 'amlogic-driver-for-v6.16' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux into soc/drivers Amlogic Driver for v6.16: - Amlogic clk measure memory usage optimization - Amlogic clk measure support for S4 & C3 Socs - Amlogic A4/A5 reset controller bindings * tag 'amlogic-driver-for-v6.16' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux: dt-bindings: reset: Add compatible for Amlogic A4/A5 Reset Controller soc: amlogic: clk-measure: Add support for S4 soc: amlogic: clk-measure: Add support for C3 dt-bindings: soc: amlogic: S4 supports clk-measure dt-bindings: soc: amlogic: C3 supports clk-measure soc: amlogic: clk-measure: Define MSR_CLK's register offset separately soc: amlogic: clk-measure: Optimize the memory size of clk-measure Link: https://lore.kernel.org/r/04908842-4c55-44a0-b74c-3aca82a1f204@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-05-21Merge tag 'amlogic-arm64-dt-for-v6.16' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux into soc/dt Amlogic ARM64 DT for v6.16: - Amlogic A4 Pinctrl support - UART RX/TX pull-up pinconf properties for all SoCs - SARADC support for the S905L SoC variant - Drop clock-latency in CPU node - Amlogic clk measure support for S4 & C3 Socs - Amlogic S6/S7/S7D initial support - I2C default pull-up bias pinconf property on Amlogic GXL based boards - Amlogic A4 & A5 Reset Controller support - New Boards: - Amlogic S6 BL209 Reference Board - Amlogic S7 BP201 Reference Board - Amlogic S7D BM202 Reference Board - Amlogic S805Y xiaomi-aquaman/Mi TV Stick * tag 'amlogic-arm64-dt-for-v6.16' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux: (21 commits) arm64: dts: amlogic: Add A5 Reset Controller arm64: dts: amlogic: Add A4 Reset Controller arm64: dts: amlogic: add support for xiaomi-aquaman/Mi TV Stick dt-bindings: arm: amlogic: add S805Y and Mi TV Stick arm64: dts: amlogic: gxl: set i2c bias to pull-up arm64: dts: add support for S7D based Amlogic BM202 arm64: dts: add support for S7 based Amlogic BP201 arm64: dts: add support for S6 based Amlogic BL209 dt-bindings: arm: amlogic: add S7D support dt-bindings: arm: amlogic: add S7 support dt-bindings: arm: amlogic: add S6 support arm64: dts: amlogic: S4: Add clk-measure controller node arm64: dts: amlogic: C3: Add clk-measure controller node arm64: dts: amlogic: Drop redundant CPU "clock-latency" arm64: dts: amlogic: gxlx-s905l-p271: add saradc compatible arm64: dts: amlogic: a1: enable UART RX and TX pull up by default arm64: dts: amlogic: axg: enable UART RX and TX pull up by default arm64: dts: amlogic: g12: enable UART RX and TX pull up by default arm64: dts: amlogic: gxl: enable UART RX and TX pull up by default arm64: dts: amlogic: gxbb: enable UART RX and TX pull up by default ... Link: https://lore.kernel.org/r/5f7d3fa4-2d9d-450b-b384-abdd903284dc@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-05-21Merge tag 'amlogic-arm-dt-for-v6.16' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux into soc/dt Amlogic ARM DT for v6.16: - UART RX/TX pull-up pinconf properties for all SoCs - New Boards: - Meson8 TCU Fernsehfee 3.0 * tag 'amlogic-arm-dt-for-v6.16' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux: ARM: dts: amlogic: meson8-fernsehfee3: Describe regulators ARM: dts: amlogic: Add TCU Fernsehfee 3.0 dt-bindings: arm: amlogic: Add TCU Fernsehfee 3.0 board dt-bindings: vendor-prefixes: Add TC Unterhaltungselektronik AG ARM: dts: amlogic: meson8b: enable UART RX and TX pull up by default ARM: dts: amlogic: meson8: enable UART RX and TX pull up by default Link: https://lore.kernel.org/r/838c5305-5c5b-4232-b7fe-86598dc50ace@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-05-21Merge tag 'samsung-dt64-6.16' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/dt Samsung DTS ARM64 changes for v6.16 1. Tesla FSD: Add Ethernet. 2. ExynosAutov920: Add more serial nodes, clock controllers for CPU cluster CL0, CL1 and CL2. 3. New Exynos7870 SoC with pretty decent coverage: pin controllers, clock controllers, I2C, MMC, serial and USB. New boards using Exynos7870: Samsung Galaxy J7 Prime, Samsung Galaxy A2 Core and Samsung Galaxy J6. 4. Google GS101: Add pmu-intr-gen syscon node for proper CPU hotplug. 5. Switch USI (serial engines) nodes to new samsung,mode constant coming with DT bindings v6.15-rc1. * tag 'samsung-dt64-6.16' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: arm64: dts: exynos: gs101: add pmu-intr-gen syscon node arm64: dts: exynos: add initial support for Samsung Galaxy J6 arm64: dts: exynos: add initial support for Samsung Galaxy A2 Core arm64: dts: exynos: add initial support for Samsung Galaxy J7 Prime arm64: dts: exynos: add initial devicetree support for exynos7870 dt-bindings: arm: samsung: add compatibles for exynos7870 devices arm64: dts: exynosautov920: add cpucl1/2 clock DT nodes arm64: dts: exynosautov920: add cpucl0 clock DT nodes arm64: dts: exynos: Add DT node for all UART ports arm64: dts: exynos: update all samsung,mode constants arm64: dts: fsd: Add Ethernet support for PERIC Block of FSD SoC arm64: dts: fsd: Add Ethernet support for FSYS0 Block of FSD SoC Link: https://lore.kernel.org/r/20250513101023.21552-6-krzysztof.kozlowski@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-05-21Merge tag 'reset-for-v6.16' of git://git.pengutronix.de/pza/linux into ↵Arnd Bergmann
soc/drivers Reset controller updates for v6.16 * Add T-HEAD TH1520 and Renesas RZ/V2H(P) USB2PHY reset controller drivers. * Add devm_reset_control_array_get_exclusive_released() variant to allow using the acquire/release hand-off mechanism for exclusive reset controls bundled into reset control arrays. * Add Sophgo SG2044 reset controller to device tree bindings. * tag 'reset-for-v6.16' of git://git.pengutronix.de/pza/linux: dt-bindings: reset: sophgo: Add SG2044 bindings. MAINTAINERS: Add entry for Renesas RZ/V2H(P) USB2PHY Port Reset driver reset: Add USB2PHY port reset driver for Renesas RZ/V2H(P) dt-bindings: reset: Document RZ/V2H(P) USB2PHY reset reset: Add devm_reset_control_array_get_exclusive_released() reset: thead: Add TH1520 reset controller driver dt-bindings: reset: Add T-HEAD TH1520 SoC Reset Controller Link: https://lore.kernel.org/r/20250513092516.3331585-1-p.zabel@pengutronix.de Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-05-21Merge tag 'ti-k3-dt-for-v6.16' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into soc/dt TI K3 device tree updates for v6.16 Generic Fixups/Cleanups: * am62*: emmc - drop disable-wp, Add bootphase tags to support MMC boot SoC Specific features and Fixes: AM62Ax: * C7x and R5F support added * Bug fix for emmc clock to point to default * CPUFreq thermal throttling on thermal alert AM62P5: * Add RNG Node (common to J722s) * Bug fix for emmc clock to point to default (common to J722S) AM625: * Wakeup R5 node * Bug fix for emmc clock to point to default * PRUSS-M support * New GPU bindings AM64: * Switch to 64-bit address space for PCIe0 * Add PCIe control nodes for main_conf region * Reserve timer nodes used by MCU F/w. AM65: * MMC: Add missing delay timing values for SDR and legacy modes * Add compatible for AM65x syscon and PCIe control properties (dtbs_check fixes) J7200: * PCIe control node to scm_conf, switch to 64-bit address space for PCIe1. J721E: * PCIe control node to scm_conf, switch to 64-bit address space for PCIe0,1. J721S2: * GPU node for Imagination Tech Rouge BXS GPU. * PCIe control node to scm_conf, switch to 64-bit address space for PCIe1. J722s/AM67A: * Switch serdes status to be enabled by board file than at SoC level. * Switch to 64-bit address space for PCIe0. J784S4/J742S2/AM69: * Add ASPCIE0 and enable output for PCIe1 * Fix length of serdes_ln_ctrl. * Switch to 64-bit address space for PCIe0,1. Board Specific: AM62Ax: * SK: co-processors C7x, R5, PWM support added * phycore-som: co-processors C7x, R5 AM62P5: * Add Toradex Verdin AM62P boards with Dahlia, Ivy, Mallow and Yavia support. * SK: Add remote processor support, PWM AM625: * Add BeagleBoard.org PocketBeagle-2 support * phycore-som: Enable R5F support * Verdin: Add eeprom compatible fallback * SK: Enable PWM, voltage supplies, clock, i2cmux rename for camera overlays (dtbs_check fixes) * BeaglePlay: Add voltage supplies for camera overlays (dtbs_check fixes) * phyboard-lyra: Add cooling maps for fan * emmc bug fixes: add non-removable flag for eMMC. AM65: * EVM: Add missing power supply description ofr Rocktech panel (dtbs_check fixes) J721E: * EVM: Enable OSPI1 * EVM/SK: Dt nodes description for mandatory power suplpies for panel and sensors (dtbs_check fixes) J721S2/AM68: * Add phyBOARD-Izar-AM68x * am68-SK: Fix regulator hierarchy J722s/AM67A: * EVM: Add mux controls for CSI2, power regulator nodes and add overlays for quad IMX219 and TEVI OV5640. * BeagleY-AI: Add bootph for main_gpio1 J784S4/J742S2/AM69: * usxgmii expansion board: Drop un-necessary pinctrl-names * evm: Add overlay for USB0 Type-A option * tag 'ti-k3-dt-for-v6.16' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux: (86 commits) arm64: dts: ti: k3-j722s-evm: Add overlay for TEVI OV5640 arm64: dts: ti: k3-j722s-evm: Add overlay for quad IMX219 arm64: dts: ti: j722s-evm: Add MUX to control CSI2RX arm64: dts: ti: j722s-evm: Add DT nodes for power regulators arm64: dts: ti: k3-am62a-phycore-som: Reserve main_timer2 for C7x DSP arm64: dts: ti: k3-am62a-phycore-som: Reserve main_rti4 for C7x DSP arm64: dts: ti: k3-am62a-phycore-som: Enable Co-processors arm64: dts: ti: k3-am62-phycore-som: Enable Co-processors arm64: dts: ti: k3-am62x-phyboard-lyra-gpio-fan: Update cooling maps arm64: dts: ti: k3-am62a: Enable CPU freq throttling on thermal alert arm64: dts: ti: k3-j721e-common-proc-board: Enable OSPI1 on J721E arm64: dts: ti: k3-j721s2: Add GPU node arm64: dts: ti: k3-am62: New GPU binding details arm64: dts: ti: k3-am62-main: Add PRUSS-M node arm64: dts: ti: k3-am64: Reserve timers used by MCU FW arm64: dts: ti: k3-am62a7-sk: Reserve main_rti4 for C7x DSP arm64: dts: ti: k3-am62a7-sk: Reserve main_timer2 for C7x DSP arm64: dts: ti: k3-am62x-sk-common: Enable IPC with remote processors arm64: dts: ti: k3-am62p5-sk: Enable IPC with remote processors arm64: dts: ti: k3-am62a7-sk: Enable IPC with remote processors ... Link: https://lore.kernel.org/r/20250512144807.yn64klchtmjjl6ac@protrude Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-05-21dt-bindings: clock: socfpga: convert to yamlMatthew Gerlach
Convert the clock device tree bindings to yaml for the Altera SoCFPGA Cyclone5, Arria5, and Arria10 chip families. Since the clock nodes are subnodes to Altera SOCFPGA Clock Manager, the yaml was added to socfpga-clk-manager.yaml. Signed-off-by: Matthew Gerlach <matthew.gerlach@altera.com> Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
2025-05-21dt-bindings: gpio: vf610: add ngpios and gpio-reserved-rangesHaibo Chen
Add optional ngpios and gpio-reserved-ranges property. Reviewed-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Haibo Chen <haibo.chen@nxp.com> Acked-by: Conor Dooley <conor.dooley@microchip.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20250520-gpio-dts-v3-1-04771c6cf325@nxp.com Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2025-05-21ASoC: dt-bindings: audio-graph-card2: add missing mic-det-gpiosKuninori Morimoto
The yaml has "hp-det-gpios" property, but Audio-Graph-Card2 can handle "mic-det-gpios" too. Add it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://patch.msgid.link/877c2kaxn4.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2025-05-21dt-bindings: net: bluetooth: nxp: Add support for host-wakeupNeeraj Sanjay Kale
Add support for host wakeup on interrupt. Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-05-21dt-bindings: iio: adc: Add ROHM BD79100GMatti Vaittinen
The ROHM BD79100G is a 12-bit ADC which can be read over SPI. Device has no MOSI pin. ADC results can be read from MISO by clocking in 16 bits. The 4 leading bits will be zero, last 12 containig the data. Device has only VCC supply pin, which acts also as a VFS, determining the voltage for full 12-bits. Specifying it is mandatory. This seems identical to the ti,ads7866. Support ROHM BU79100G using ti,ads7866 as a fallback. Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com> Acked-by: Conor Dooley <conor.dooley@microchip.com> Link: https://patch.msgid.link/4907a096eee1f54afae834213cf721b551382d4e.1747203712.git.mazziesaccount@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-05-21dt-bindings: iio: adc: add NCT7201 ADCsEason Yang
Add a binding specification for the Nuvoton NCT7201/NCT7202 up to 12-bit ADCs with I2C interface. Signed-off-by: Eason Yang <j2anfernee@gmail.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://patch.msgid.link/20250512083156.3300006-2-j2anfernee@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-05-21dt-bindings: trivial-devices: Document SEN0322Tóth János
Add documentation for the DFRobot SEN0322 oxygen sensor. Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Tóth János <gomba007@gmail.com> Link: https://patch.msgid.link/20250506-iio-chemical-sen0322-v4-1-1465ac8dc190@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-05-21dt-bindings: iio: adc: mcp3911: add reset-gpiosMarcus Folkesson
The MCP391X family provides an active low reset signal that is still not described in the bindings. Add reset-gpios to the bindings and the example. Co-developed-by: Lukas Rauber <lukas.rauber@janitza.de> Signed-off-by: Lukas Rauber <lukas.rauber@janitza.de> Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com> Acked-by: Conor Dooley <conor.dooley@microchip.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://patch.msgid.link/20250428-mcp3911-fixes-v2-2-406e39330c3d@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-05-21dt-bindings: iio: dac: Add adi,ad3530r.yamlKim Seer Paller
Document the AD3530/AD3530R (8-channel) and AD3531/AD3531R (4-channel) low-power, 16-bit, buffered voltage output DACs with software- programmable gain controls. They provide full-scale output spans of 2.5V or 5V for reference voltages of 2.5V. These devices operate on a single 2.7V to 5.5V supply and are guaranteed to be monotonic by design. The "R" variants include a 2.5V, 5ppm/°C internal reference, which is disabled by default. Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: David Lechner <dlechner@baylibre.com> Signed-off-by: Kim Seer Paller <kimseer.paller@analog.com> Link: https://patch.msgid.link/20250429-togreg-v7-2-0af9c543b545@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-05-21dt-bindings: iio: adc: Add compatible for Dimensity 1200 MT6893AngeloGioacchino Del Regno
Add a compatible for the Dimensity 1200 (MT6893) SoC; The AUXADC IP in this chip is fully compatible with the one found in MT8173. Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Acked-by: Rob Herring (Arm) <robh@kernel.org> Link: https://patch.msgid.link/20250416120235.147889-1-angelogioacchino.delregno@collabora.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-05-21dt-bindings: iio: dac: ad7293: add vrefin supportAntoniu Miclaus
Add support for vrefin supply responsible for providing external reference to the SAR ADC within the part. Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com> Acked-by: Rob Herring (Arm) <robh@kernel.org> Link: https://patch.msgid.link/20250422085529.4407-1-antoniu.miclaus@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-05-21dt-bindings: Add device tree support for Winsen MHZ19B CO2 sensorGyeyoung Baek
Add device tree support for Winsen MHZ19B sensor. Signed-off-by: Gyeyoung Baek <gye976@gmail.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://patch.msgid.link/20250423194100.53934-3-gye976@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-05-21dt-bindings: Add Winsen to the vendor prefixesGyeyoung Baek
Add Winsen to the vendor prefixes. Signed-off-by: Gyeyoung Baek <gye976@gmail.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://patch.msgid.link/20250423194100.53934-2-gye976@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
generated by cgit (git 2.34.1) at 2025-09-22 22:52:12 +0000