summaryrefslogtreecommitdiff
path: root/Documentation/driver-api
AgeCommit message (Collapse)Author
2023-11-24docs: mtd: spi-nor: drop obsolete infoTudor Ambarus
The architecture description is obsolete, it no longer applies to the current SPI NOR framework state, remove it. Reviewed-by: Michael Walle <michael@walle.cc> Reviewed-by: Pratyush Yadav <pratyush@kernel.org> Link: https://lore.kernel.org/r/20231124184902.1194235-3-tudor.ambarus@linaro.org Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
2023-11-24docs: mtd: spi-nor: add sections about flash additions and testingTudor Ambarus
Add sections about how to propose a new flash addition and about the minimum testing requirements. Reviewed-by: Michael Walle <michael@walle.cc> Reviewed-by: Pratyush Yadav <pratyush@kernel.org> Link: https://lore.kernel.org/r/20231124184902.1194235-2-tudor.ambarus@linaro.org Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
2023-11-06Merge tag 'media/v6.7-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: - the old V4L2 core videobuf kAPI was finally removed. All media drivers should now be using VB2 kAPI - new automotive driver: mgb4 - new platform video driver: npcm-video - new sensor driver: mt9m114 - new TI driver used in conjunction with Cadence CSI2RX IP to bridge TI-specific parts - ir-rx51 was removed and the N900 DT binding was moved to the pwm-ir-tx generic driver - drop atomisp-specific ov5693, using the upstream driver instead - the camss driver has gained RDI3 support for VFE 17x - the atomisp driver now detects ISP2400 or ISP2401 at run time. No need to set it up at build time anymore - lots of driver fixes, cleanups and improvements * tag 'media/v6.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (377 commits) media: nuvoton: VIDEO_NPCM_VCD_ECE should depend on ARCH_NPCM media: venus: Fix firmware path for resources media: venus: hfi_cmds: Replace one-element array with flex-array member and use __counted_by media: venus: hfi_parser: Add check to keep the number of codecs within range media: venus: hfi: add checks to handle capabilities from firmware media: venus: hfi: fix the check to handle session buffer requirement media: venus: hfi: add checks to perform sanity on queue pointers media: platform: cadence: select MIPI_DPHY dependency media: MAINTAINERS: Fix path for J721E CSI2RX bindings media: cec: meson: always include meson sub-directory in Makefile media: videobuf2: Fix IS_ERR checking in vb2_dc_put_userptr() media: platform: mtk-mdp3: fix uninitialized variable in mdp_path_config() media: mediatek: vcodec: using encoder device to alloc/free encoder memory media: imx-jpeg: notify source chagne event when the first picture parsed media: cx231xx: Use EP5_BUF_SIZE macro media: siano: Drop unnecessary error check for debugfs_create_dir/file() media: mediatek: vcodec: Handle invalid encoder vsi media: aspeed: Drop unnecessary error check for debugfs_create_file() Documentation: media: buffer.rst: fix V4L2_BUF_FLAG_PREPARED Documentation: media: gen-errors.rst: fix confusing ENOTTY description ...
2023-11-04Merge tag 'i3c/for-6.7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux Pull i3c updates from Alexandre Belloni: "There are now more fixes because as stated in my previous pull request, people now have access to actual hardware. Core: - handle IBI in the proper order Drivers: - cdns: fix status register access - mipi-i3c-hci: many fixes now that the driver has been actually tested - svc: many IBI fixes, correct compatible string, fix hot join corner cases" * tag 'i3c/for-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux: (29 commits) i3c: master: handle IBIs in order they came i3c: master: mipi-i3c-hci: Fix a kernel panic for accessing DAT_data. i3c: master: svc: fix compatibility string mismatch with binding doc i3c: master: svc: fix random hot join failure since timeout error i3c: master: svc: fix SDA keep low when polling IBIWON timeout happen i3c: master: svc: fix check wrong status register in irq handler i3c: master: svc: fix ibi may not return mandatory data byte i3c: master: svc: fix wrong data return when IBI happen during start frame i3c: master: svc: fix race condition in ibi work thread i3c: Fix typo "Provisional ID" to "Provisioned ID" i3c: Fix potential refcount leak in i3c_master_register_new_i3c_devs i3c: mipi-i3c-hci: Resume controller after aborted transfer i3c: mipi-i3c-hci: Resume controller explicitly i3c: mipi-i3c-hci: Fix missing xfer->completion in hci_cmd_v1_daa() i3c: mipi-i3c-hci: Do not unmap region not mapped for transfer i3c: mipi-i3c-hci: Set number of SW enabled Ring Bundles earlier i3c: mipi-i3c-hci: Fix race between bus cleanup and interrupt i3c: mipi-i3c-hci: Set ring start request together with enable i3c: mipi-i3c-hci: Remove BUG() when Ring Abort request times out i3c: mipi-i3c-hci: Fix out of bounds access in hci_dma_irq_handler ...
2023-11-03Merge tag 'usb-6.7-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB/Thunderbolt updates from Greg KH: "Here is the "big" set of USB and Thunderbolt changes for 6.7-rc1. Nothing really major in here, just lots of constant development for new hardware. Included in here are: - Thunderbolt (i.e. USB4) fixes for reported issues and support for new hardware types and devices - USB typec additions of new drivers and cleanups for some existing ones - xhci cleanups and expanded tracing support and some platform specific updates - USB "La Jolla Cove Adapter (LJCA)" support added, and the gpio, spi, and i2c drivers for that type of device (all acked by the respective subsystem maintainers.) - lots of USB gadget driver updates and cleanups - new USB dwc3 platforms supported, as well as other dwc3 fixes and cleanups - USB chipidea driver updates - other smaller driver cleanups and additions, full details in the shortlog All of these have been in the linux-next tree for a while with no reported problems" * tag 'usb-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (167 commits) usb: gadget: uvc: Add missing initialization of ssp config descriptor usb: storage: set 1.50 as the lower bcdDevice for older "Super Top" compatibility usb: raw-gadget: report suspend, resume, reset, and disconnect events usb: raw-gadget: don't disable device if usb_ep_queue fails usb: raw-gadget: properly handle interrupted requests usb:cdnsp: remove TRB_FLUSH_ENDPOINT command usb: gadget: aspeed_udc: Convert to platform remove callback returning void dt-bindings: usb: fsa4480: Add compatible for OCP96011 usb: typec: fsa4480: Add support to swap SBU orientation dt-bindings: usb: fsa4480: Add data-lanes property to endpoint usb: typec: tcpm: Fix NULL pointer dereference in tcpm_pd_svdm() Revert "dt-bindings: usb: Add bindings for multiport properties on DWC3 controller" Revert "dt-bindings: usb: qcom,dwc3: Add bindings for SC8280 Multiport" thunderbolt: Fix one kernel-doc comment usb: gadget: f_ncm: Always set current gadget in ncm_bind() usb: core: Remove duplicated check in usb_hub_create_port_device usb: typec: tcpm: Add additional checks for contaminant arm64: dts: rockchip: rk3588s: Add USB3 host controller usb: dwc3: add optional PHY interface clocks dt-bindings: usb: add rk3588 compatible to rockchip,dwc3 ...
2023-11-03Merge tag 'tty-6.7-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty and serial updates from Greg KH: "Here is the big set of tty/serial driver changes for 6.7-rc1. Included in here are: - console/vgacon cleanups and removals from Arnd - tty core and n_tty cleanups from Jiri - lots of 8250 driver updates and cleanups - sc16is7xx serial driver updates - dt binding updates - first set of port lock wrapers from Thomas for the printk fixes coming in future releases - other small serial and tty core cleanups and updates All of these have been in linux-next for a while with no reported issues" * tag 'tty-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (193 commits) serdev: Replace custom code with device_match_acpi_handle() serdev: Simplify devm_serdev_device_open() function serdev: Make use of device_set_node() tty: n_gsm: add copyright Siemens Mobility GmbH tty: n_gsm: fix race condition in status line change on dead connections serial: core: Fix runtime PM handling for pending tx vgacon: fix mips/sibyte build regression dt-bindings: serial: drop unsupported samsung bindings tty: serial: samsung: drop earlycon support for unsupported platforms tty: 8250: Add note for PX-835 tty: 8250: Fix IS-200 PCI ID comment tty: 8250: Add Brainboxes Oxford Semiconductor-based quirks tty: 8250: Add support for Intashield IX cards tty: 8250: Add support for additional Brainboxes PX cards tty: 8250: Fix up PX-803/PX-857 tty: 8250: Fix port count of PX-257 tty: 8250: Add support for Intashield IS-100 tty: 8250: Add support for Brainboxes UP cards tty: 8250: Add support for additional Brainboxes UC cards tty: 8250: Remove UC-257 and UC-431 ...
2023-11-01Merge tag 'docs-6.7' of git://git.lwn.net/linuxLinus Torvalds
Pull documentation updates from Jonathan Corbet: "The number of commits for documentation is not huge this time around, but there are some significant changes nonetheless: - Some more Spanish-language and Chinese translations - The much-discussed documentation of the confidential-computing threat model - Powerpc and RISCV documentation move under Documentation/arch - these complete this particular bit of documentation churn - A large traditional-Chinese documentation update - A new document on backporting and conflict resolution - Some kernel-doc and Sphinx fixes Plus the usual smattering of smaller updates and typo fixes" * tag 'docs-6.7' of git://git.lwn.net/linux: (40 commits) scripts/kernel-doc: Fix the regex for matching -Werror flag docs: backporting: address feedback Documentation: driver-api: pps: Update PPS generator documentation speakup: Document USB support doc: blk-ioprio: Bring the doc in line with the implementation docs: usb: fix reference to nonexistent file in UVC Gadget docs: doc-guide: mention 'make refcheckdocs' Documentation: fix typo in dynamic-debug howto scripts/kernel-doc: match -Werror flag strictly Documentation/sphinx: Remove the repeated word "the" in comments. docs: sparse: add SPDX-License-Identifier docs/zh_CN: Add subsystem-apis Chinese translation docs/zh_TW: update contents for zh_TW docs: submitting-patches: encourage direct notifications to commenters docs: add backporting and conflict resolution document docs: move riscv under arch docs: update link to powerpc/vmemmap_dedup.rst mm/memory-hotplug: fix typo in documentation docs: move powerpc under arch PCI: Update the devres documentation regarding to pcim_*() ...
2023-11-01Merge tag 'drm-next-2023-10-31-1' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull drm updates from Dave Airlie: "Highlights: - AMD adds some more upcoming HW platforms - Intel made Meteorlake stable and started adding Lunarlake - nouveau has a bunch of display rework in prepartion for the NVIDIA GSP firmware support - msm adds a7xx support - habanalabs has finished migration to accel subsystem Detail summary: kernel: - add initial vmemdup-user-array core: - fix platform remove() to return void - drm_file owner updated to reflect owner - move size calcs to drm buddy allocator - let GPUVM build as a module - allow variable number of run-queues in scheduler edid: - handle bad h/v sync_end in EDIDs panfrost: - add Boris as maintainer fbdev: - use fb_ops helpers more - only allow logo use from fbcon - rename fb_pgproto to pgprot_framebuffer - add HPD state to drm_connector_oob_hotplug_event - convert to fbdev i/o mem helpers i915: - Enable meteorlake by default - Early Xe2 LPD/Lunarlake display enablement - Rework subplatforms into IP version checks - GuC based TLB invalidation for Meteorlake - Display rework for future Xe driver integration - LNL FBC features - LNL display feature capability reads - update recommended fw versions for DG2+ - drop fastboot module parameter - added deviceid for Arrowlake-S - drop preproduction workarounds - don't disable preemption for resets - cleanup inlines in headers - PXP firmware loading fix - Fix sg list lengths - DSC PPS state readout/verification - Add more RPL P/U PCI IDs - Add new DG2-G12 stepping - DP enhanced framing support to state checker - Improve shared link bandwidth management - stop using GEM macros in display code - refactor related code into display code - locally enable W=1 warnings - remove PSR watchdog timers on LNL amdgpu: - RAS/FRU EEPROM updatse - IP discovery updatses - GC 11.5 support - DCN 3.5 support - VPE 6.1 support - NBIO 7.11 support - DML2 support - lots of IP updates - use flexible arrays for bo list handling - W=1 fixes - Enable seamless boot in more cases - Enable context type property for HDMI - Rework GPUVM TLB flushing - VCN IB start/size alignment fixes amdkfd: - GC 10/11 fixes - GC 11.5 support - use partial migration in GPU faults radeon: - W=1 Fixes - fix some possible buffer overflow/NULL derefs nouveau: - update uapi for NO_PREFETCH - scheduler/fence fixes - rework suspend/resume for GSP-RM - rework display in preparation for GSP-RM habanalabs: - uapi: expose tsc clock - uapi: block access to eventfd through control device - uapi: force dma-buf export to PAGE_SIZE alignments - complete move to accel subsystem - move firmware interface include files - perform hard reset on PCIe AXI drain event - optimise user interrupt handling msm: - DP: use existing helpers for DPCD - DPU: interrupts reworked - gpu: a7xx (a730/a740) support - decouple msm_drv from kms for headless devices mediatek: - MT8188 dsi/dp/edp support - DDP GAMMA - 12 bit LUT support - connector dynamic selection capability rockchip: - rv1126 mipi-dsi/vop support - add planar formats ast: - rename constants panels: - Mitsubishi AA084XE01 - JDI LPM102A188A - LTK050H3148W-CTA6 ivpu: - power management fixes qaic: - add detach slice bo api komeda: - add NV12 writeback tegra: - support NVSYNC/NHSYNC - host1x suspend fixes ili9882t: - separate into own driver" * tag 'drm-next-2023-10-31-1' of git://anongit.freedesktop.org/drm/drm: (1803 commits) drm/amdgpu: Remove unused variables from amdgpu_show_fdinfo drm/amdgpu: Remove duplicate fdinfo fields drm/amd/amdgpu: avoid to disable gfxhub interrupt when driver is unloaded drm/amdgpu: Add EXT_COHERENT support for APU and NUMA systems drm/amdgpu: Retrieve CE count from ce_count_lo_chip in EccInfo table drm/amdgpu: Identify data parity error corrected in replay mode drm/amdgpu: Fix typo in IP discovery parsing drm/amd/display: fix S/G display enablement drm/amdxcp: fix amdxcp unloads incompletely drm/amd/amdgpu: fix the GPU power print error in pm info drm/amdgpu: Use pcie domain of xcc acpi objects drm/amd: check num of link levels when update pcie param drm/amdgpu: Add a read to GFX v9.4.3 ring test drm/amd/pm: call smu_cmn_get_smc_version in is_mode1_reset_supported. drm/amdgpu: get RAS poison status from DF v4_6_2 drm/amdgpu: Use discovery table's subrevision drm/amd/display: 3.2.256 drm/amd/display: add interface to query SubVP status drm/amd/display: Read before writing Backlight Mode Set Register drm/amd/display: Disable SYMCLK32_SE RCO on DCN314 ...
2023-10-31Merge tag 'gpio-updates-for-v6.7-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux Pull gpio updates from Bartosz Golaszewski: "We don't have any new drivers. The loongson driver is getting extended with support for new models. There's a big refactor of gpio-pca953x and many small improvements to others. The GPIO code in the kernel has acquired a lot of cruft over the years as well as many abusers of the API across the kernel tree. This release cycle we have started a major cleanup and improvement effort that will most likely span several releases. We have started by converting external users of struct gpio_chip to accessing the wrapper around it - struct gpio_device. This is because the latter is reference counted while the former is removed when the provider is unbound. We also removed several instances of drivers accessing private GPIOLIB structures and including the private header from drivers/gpio/. To that end you'll see several commits aimed at different subsystems (acked by relevant maintainers) as well as two merges from the x86/platform tree. We'll then rework the locking in GPIOLIB which currently uses a big spinlock for many different things and could use becoming more fine-grained, especially as it doesn't even get the locking right. We'll also use SRCU for protecting the gpio_chip pointer against in-kernel hot-unplug crashes similar to what we saw triggered from user-space and fixed with semaphores in gpiolib-cdev. The core GPIOLIB is still vulnerable to these use-cases. I'm just mentioning the plans here, this is not part of this PR. You'll see some new instances of using __free(). We've added a gpio_device_put cleanup helper similar to the put_device one introduced by Peter Zijlstra and used it according to the preferred pattern except where it didn't make sense. GPIOLIB core: - provide interfaces allowing users to retrieve, manage and query the reference counted GPIO device instead of accessing the private gpio_chip structure - replace gpiochip_find() with gpio_device_find() - remove unused acpi_get_and_request_gpiod() - improve the ignore_interrupt functionality in GPIO ACPI - correct notifier return codes in gpiolib-of - unexport gpiod_set_transitory() as it's unused outside of core GPIO code - while there are still external users accessing struct gpio_chip, let's make gpiochip_get_desc() public so that they at least use the preferred helper - improve locking for lookup tables - annotate struct linereq with __counted_by - improve GPIOLIB docs - add an OF quirk for LED trigger sources Driver improvements: - convert all GPIO drivers with .remove() callbacks to using the new variant returning void instead of int - stop accessing the GPIOLIB private structures in gpio-mockup, i2c-mux-gpio, hte-tegra194, gpio-sim - use the recommended pattern for autofree variables in gpio-sim - add support for more models to gpio-loongson - use a notifier chain to notify other blocks about interrupts in gpio-eic-sprd instead of looking up GPIO devices on every interrupt - convert gpio-pca953x and gpio-fx6408 to using the maple tree regmap cache - don't include GPIOLIB internal headers in drivers which don't need them - move the ingenic NAND quirk into gpiolib-of - add an ignore interrupt quirk for Peaq C1010 - drop static GPIO base from gpio-omap, gpio-f7188x - use the preferred device_get_match_data() function in drivers that still don't - refactor gpio-pca953x: switch to using DEFINE_SIMPLE_DEV_PM_OPS(), use cleanup helpers, use dev_err_probe() where it makes sense, fully convert to using devres and some other minor tweaks DT bindings: - add support for a new model to gpio-vf610 and update existing properties - add support for more loongson models - add missing support for imx models that are used but undocumented - convert bindings for Intel IXP4xx to schema Minor stuff: - deprecate gpio-mockup in favor of gpio-sim - include missing headers here and there - stop using gpiochip_find() in OMAP1 board files - minor tweaks in gpio-vf610, gpio-hisi - remove unneeded 'extern' specifiers from headers" * tag 'gpio-updates-for-v6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (108 commits) hte: tegra194: add GPIOLIB dependency hte: tegra194: don't access struct gpio_chip gpiolib: provide gpio_device_get_base() i2c: mux: gpio: don't fiddle with GPIOLIB internals gpiolib: provide gpiod_to_gpio_device() gpiolib: provide gpio_device_to_device() gpio: hisi: Fix format specifier gpiolib: provide gpio_device_find_by_fwnode() gpio: acpi: remove acpi_get_and_request_gpiod() gpio: Use device_get_match_data() gpio: vf610: update comment for i.MX8ULP and i.MX93 legacy compatibles platform/x86: int3472: Switch to devm_get_gpiod() platform/x86: int3472: Stop using gpiod_toggle_active_low() platform/x86: int3472: Add new skl_int3472_gpiod_get_from_temp_lookup() helper platform/x86: int3472: Add new skl_int3472_fill_gpiod_lookup() helper gpio: vf610: simplify code by dropping data check gpio: vf610: add i.MX8ULP of_device_id entry dt-bindings: gpio: vf610: add i.MX95 compatible dt-bindings: gpio: vf610: correct i.MX8ULP and i.MX93 dt-bindings: gpio: vf610: update gpio-ranges ...
2023-10-31Merge tag 'thermal-6.7-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull thermal control updates from Rafael Wysocki: "These further rework the ACPI thermal driver, after the changes made to it in the previous cycle, to make it easier to grasp, get rid of redundant pieces of internal data structures and eliminate its reliance on a specific ordering of trip point objects in the thermal core, make thermal core adjustments needed for the ACPI thermal driver rework, modify the thermal governor interface so as to use trip pointers for representing trip points in it, switch over multiple thermal drivers to using void platform driver remove callbacks, add support for 2 hardware features to the Intel int340x thermal driver, add support for new hardware on ARM platforms, update documentation, fix problems, clean up code and update the MAINTAINERS record for thermal control. Specifics: - Untangle the initialization and updates of passive and active trip points in the ACPI thermal driver (Rafael Wysocki) - Reduce code duplication related to the initialization and updates of trip points in the ACPI thermal driver (Rafael Wysocki) - Use trip pointers for cooling device binding in the ACPI thermal driver (Rafael Wysocki) - Simplify critical and hot trips representation in the ACPI thermal driver (Rafael Wysocki) - Use trip pointers in thermal governors and in the related part of the thermal core (Rafael Wysocki) - Drop the trips_disabled bitmask that has become redundant from the thermal core (Rafael Wysocki) - Avoid updating trip points when the thermal zone temperature falls into a trip point's hysteresis range (ícolas F. R. A. Prado) - Add power floor notifications support to the int340x thermal control driver (Srinivas Pandruvada) - Rework updating trip points in the int340x thermal driver so that it does not access thermal zone internals directly (Rafael Wysocki) - Use param_get_byte() instead of param_get_int() as the max_idle module parameter .get() callback in the Intel powerclamp thermal driver to avoid possible out-of-bounds access (David Arcari) - Add workload hints support to the int340x thermal driver (Srinivas Pandruvada) - Add support for Mediatek LVTS MT8192 along with suspend/resume routines (Balsam Chihi) - Fix probe for THERMAL_V2 in the Mediatek LVTS driver (Markus Schneider-Pargmann) - Remove duplicate error message from the max76620 driver when thermal_of_zone_register() fails (Thierry Reding) - Add i.MX7D compatible bindings to fix a warning from dtbs_check for the imx6ul platform (Alexander Stein) - Add sa8775p compatible to the QCom tsens driver (Priyansh Jain) - Fix error check in lvts_debugfs_init() to be against PTR_ERR() in the LVTS Mediatek driver (Minjie Du) - Remove unused variable in thermal/tools (Kuan-Wei Chiu) - Document the imx8dl thermal sensor (Fabio Estevam) - Add variable names in callback prototypes to prevent warning from checkpatch.pl in the imx8mm driver (Bragatheswaran Manickavel) - Add missing unevaluatedProperties on child node schemas for tegra124 (Rob Herring) - Add mt7988 support to the Mediatek LVTS driver (Frank Wunderlich)" * tag 'thermal-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (111 commits) thermal: ACPI: Include the right header file thermal: core: Don't update trip points inside the hysteresis range thermal: core: Pass trip pointer to governor throttle callback thermal: gov_step_wise: Fold update_passive_instance() into its caller thermal: gov_power_allocator: Use trip pointers instead of trip indices thermal: gov_fair_share: Rearrange get_trip_level() thermal: trip: Define for_each_trip() macro thermal: trip: Simplify computing trip indices thermal/qcom/tsens: Drop ops_v0_1 thermal/drivers/mediatek/lvts_thermal: Update calibration data documentation thermal/drivers/mediatek/lvts_thermal: Add mt8192 support thermal/drivers/mediatek/lvts_thermal: Add suspend and resume dt-bindings: thermal: mediatek: Add LVTS thermal controller definition for mt8192 thermal/drivers/mediatek: Fix probe for THERMAL_V2 thermal/drivers/max77620: Remove duplicate error message dt-bindings: timer: add imx7d compatible dt-bindings: net: microchip: Allow nvmem-cell usage dt-bindings: imx-thermal: Add #thermal-sensor-cells property dt-bindings: thermal: tsens: Add sa8775p compatible thermal/drivers/mediatek/lvts_thermal: Fix error check in lvts_debugfs_init() ...
2023-10-26Documentation: driver-api: pps: Update PPS generator documentationPandith N
PPS documentation has a generalized section for generators. Update the section so any new generator documentation can be appended. Signed-off-by: Pandith N <pandith.n@intel.com> Signed-off-by: Lakshmi Sowjanya D <lakshmi.sowjanya.d@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Rodolfo Giometti <giometti@enneenne.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net> Link: https://lore.kernel.org/r/20231016101953.27308-1-lakshmi.sowjanya.d@intel.com
2023-10-23wifi: mac80211: rename ieee80211_tx_status() to ieee80211_tx_status_skb()Kalle Valo
make htmldocs warns: Documentation/driver-api/80211/mac80211:109: ./include/net/mac80211.h:5170: WARNING: Duplicate C declaration, also defined at mac80211:1117. Declaration is '.. c:function:: void ieee80211_tx_status (struct ieee80211_hw *hw, struct sk_buff *skb)'. This is because there's a function named ieee80211_tx_status() and a struct named ieee80211_tx_status. This has been discussed previously but no solution found: https://lore.kernel.org/all/20220521114629.6ee9fc06@coco.lan/ There's also a bug open for three years with no solution in sight: https://github.com/sphinx-doc/sphinx/pull/8313 So I guess we have no other solution than to a workaround this in the code, for example to rename the function to ieee80211_tx_status_skb() to avoid the name conflict. I got the idea for the name from ieee80211_tx_status_noskb() in which the skb is not provided as an argument, instead with ieee80211_tx_status_skb() the skb is provided. Compile tested only. Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20231012114229.2931808-2-kvalo@kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-10-15dpll: docs: add support for pin signal phase offset/adjustArkadiusz Kubalewski
Add documentation on: - measurement of phase of signal between pin and dpll - adjustment of pin signal phase Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-10-12thermal: int340x: processor_thermal: Support power floor notificationsSrinivas Pandruvada
When the hardware reduces the power to the minimum possible, the power floor is notified via an interrupt. This can happen when user space requests a power limit via powercap RAPL interface, which forces the system to enter to the lowest power. This power floor indication can be used as a hint to resort to other methods of reducing power than via RAPL power limit. Before power floor status can be read or the firmware can trigger notifications regarding it, it needs to be configured via a mailbox command. The actual power floor status is read via bit 39 of MMIO offset 0x5B18 of the processor thermal PCI device. To show the current power floor status and get notification on a sysfs attribute, add 2 new attributes to /sys/bus/pci/devices/0000\:00\:04.0/power_limits/ power_floor_enable : This attribute is present when power floor notifications are supported. This attribute allows to enable/disable power floor notifications. power_floor_status : This attribute is present when power floor notifications are supported. When enabled via power_floor_enable, this attribute shows the current power floor status. The power floor implementation provides interfaces which are called from the sysfs callbacks to enable/disable and read power floor status. It also provides two additional interfaces to check if the current processor thermal device interrupt is for power floor status and to send notifications to user space. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> [ rjw: Changelog and documentation changes edits ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-10-12media: Documentation: ccs: Fix spelling mistakeUmang Jain
Correct the wrong spelling of 'exposes' in the binner section. Signed-off-by: Umang Jain <umang.jain@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-10-10PCI: Update the devres documentation regarding to pcim_*()Andy Shevchenko
There were many changes to PCI core in scope of managed resources APIs. Update documentation to list the current state of affairs. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net> Link: https://lore.kernel.org/r/20231006150634.3444251-1-andriy.shevchenko@linux.intel.com
2023-10-10pwm: Adapt sysfs API documentation to realityUwe Kleine-König
Most low-level PWM drivers support duty_cycle == period, and so does the sysfs API. Also polarity can be changed for enabled PWMs since commit 39100ceea79f ("pwm: Switch to the atomic API"). Reported-by: Jens Gehrlein <J.Gehrlein@eckelmann.de> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Jonathan Corbet <corbet@lwn.net> Link: https://lore.kernel.org/r/20230911154454.675057-1-u.kleine-koenig@pengutronix.de
2023-10-10i3c: Fix typo "Provisional ID" to "Provisioned ID"Matt Johnston
The MIPI I3C spec refers to a Provisioned ID, since it is (sometimes) provisioned at device manufacturing. Signed-off-by: Matt Johnston <matt@codeconstruct.com.au> Acked-by: Rob Herring <robh@kernel.org> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/r/20231003075339.197099-1-matt@codeconstruct.com.au Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2023-10-07media: Documentation: Split camera sensor documentationSakari Ailus
Split camera sensor documentation into user and kernel portions. This should make it easier for the user space developers to find the relevant documentation. Also add a list of exemplary drivers and add imx219 driver to it, besides those that were already mentioned. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-10-05docs: driver-api: usb: update dma infoRandy Li
We should not hide the recommend APIs in a obscure place. Signed-off-by: Randy Li <ayaka@soulik.info> Link: https://lore.kernel.org/r/20230914172336.18761-3-ayaka@soulik.info Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-04gpio: Further document optional GPIOLIBLinus Walleij
Optional GPIOLIB as in not depended on or selected by a driver should NOT use any *_optional() calls, this becomes paradoxical. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-10-03Documentation: dpll: wrap DPLL_CMD_PIN_GET output in a code blockBagas Sanjaya
DPLL_CMD_PIN_GET netlink command output for mux-type pins looks ugly with normal paragraph formatting. Format it as a code block instead. Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Tested-by: Randy Dunlap <rdunlap@infradead.org> Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev> Link: https://lore.kernel.org/r/20230928052708.44820-3-bagasdotme@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-03Documentation: dpll: Fix code blocksBagas Sanjaya
kernel test robot and Stephen Rothwell report htmldocs warnings: Documentation/driver-api/dpll.rst:427: WARNING: Error in "code-block" directive: maximum 1 argument(s) allowed, 18 supplied. .. code-block:: c <snipped>... Documentation/driver-api/dpll.rst:444: WARNING: Error in "code-block" directive: maximum 1 argument(s) allowed, 21 supplied. .. code-block:: c <snipped>... Documentation/driver-api/dpll.rst:474: WARNING: Error in "code-block" directive: maximum 1 argument(s) allowed, 12 supplied. .. code-block:: c <snipped>... Fix these above by adding missing blank line separator after code-block directive. Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202309180456.lOhxy9gS-lkp@intel.com/ Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Closes: https://lore.kernel.org/linux-next/20230918131521.155e9e63@canb.auug.org.au/ Fixes: dbb291f19393b6 ("dpll: documentation on DPLL subsystem interface") Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Tested-by: Randy Dunlap <rdunlap@infradead.org> Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev> Link: https://lore.kernel.org/r/20230928052708.44820-2-bagasdotme@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-03tty: fix kernel-doc for functions in tty.hJiri Slaby (SUSE)
tty_kref_get() is already included in Documentation, but is not properly formatted. Fix this. tty_get_baud_rate() is neither properly formatted, nor is included. Fix both. Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org> Link: https://lore.kernel.org/r/20230919085156.1578-10-jirislaby@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-03tty: fix up and plug in tty_ioctl kernel-docJiri Slaby (SUSE)
The ioctl helpers are well documented, except they are not plugged in the Documentation. So fix up the minor issues in the kernel-doc and plug it in. The minor issues include: * bad \t on every line (sphinx misinterprets the description otherwise) * missing colon after Return * superfluous \n after the comment * make some struct members and constants a hyperlink * and so on Perhaps better to use --word-diff if one wants to see the "real" changes. Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org> Link: https://lore.kernel.org/r/20230919085156.1578-9-jirislaby@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-09-27media: remove the old videobuf frameworkHans Verkuil
The last driver that still used this old framework has been converted to the videobuf2 framework. So it is now time to delete the old videobuf code. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Reviewed-by: Hans de Goede <hdegoede@redhat.com>
2023-09-27Documentation: media: camera-sensor: Improve power management documentationLaurent Pinchart
Camera sensor drivers are highly subject to cargo cult programming, with back practices being copied from old to new drivers. In particular, many drivers implement system and runtime PM incorrectly. As a first step towards fixing this situation, refactor and expand the power management documentation to detail correct usage of system and runtime PM. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-09-27Documentation: media: camera-sensor: Move power management sectionLaurent Pinchart
Move the power management section up, just after clocks, as it relates to internal system resources and not features exposed to applications. The text itself is otherwise unchanged. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-09-27Documentation: media: camera-sensor: Use link to upstream DT bindingsLaurent Pinchart
The Documentation/devicetree/bindings/clock/clock-bindings.txt file is deprecated and points to clock-bindings.yaml, which is not hosted in the kernel source tree. Use an HTTPS link to refer to the YAML binding document. While at it, drop "currently" from the paragraph, as the whole file refers to the current recommended practices except where explicitly noted. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-09-27Documentation: media: camera-sensor: Fix typo and vocabulary selectionLaurent Pinchart
Drop an unneeded double colon, and use 'shall' instead of 'must' for consistency with the rest of the file. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-09-27media: Documentation: Mention CCS toolsSakari Ailus
CCS tools is a useful set of programs and libraries for working with CCS static data. Do mention that in context of the CCS driver. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-09-22Merge tag 'drm-misc-next-2023-09-11-1' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for v6.7-rc1: UAPI Changes: - Nouveau changed to not set NO_PREFETCH flag explicitly. Cross-subsystem Changes: - Update documentation of dma-buf intro and uapi. - fbdev/sbus fixes. - Use initializer macros in a lot of fbdev drivers. - Add Boris Brezillon as Panfrost driver maintainer. - Add Jessica Zhang as drm/panel reviewer. - Make more fbdev drivers use fb_ops helpers for deferred io. - Small hid trailing whitespace fix. - Use fb_ops in hid/picolcd Core Changes: - Assorted small fixes to ttm tests, drm/mst. - Documentation updates to bridge. - Add kunit tests for some drm_fb functions. - Rework drm_debugfs implementation. - Update xe documentation to mark todos as completed. Driver Changes: - Add support to rockchip for rv1126 mipi-dsi and vop. - Assorted small fixes to nouveau, bridge/samsung-dsim, bridge/lvds-codec, loongson, rockchip, panfrost, gma500, repaper, komeda, virtio, ssd130x. - Add support for simple panels Mitsubishi AA084XE01, JDI LPM102A188A, - Documentation updates to accel/ivpu. - Some nouveau scheduling/fence fixes. - Power management related fixes and other fixes to ivpu. - Assorted bridge/it66121 fixes. - Make platform drivers return void in remove() callback. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/3da6554b-3b47-fe7d-c4ea-21f4f819dbb6@linux.intel.com
2023-09-17dpll: documentation on DPLL subsystem interfaceVadim Fedorenko
Add documentation explaining common netlink interface to configure DPLL devices and monitoring events. Common way to implement DPLL device in a driver is also covered. Co-developed-by: Bagas Sanjaya <bagasdotme@gmail.com> Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com> Signed-off-by: Vadim Fedorenko <vadim.fedorenko@linux.dev> Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Signed-off-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-09-14thermal: int340x: processor_thermal: Add workload type hint interfaceSrinivas Pandruvada
Prior to Meteor Lake processor generation, user space can pass workload type request to the firmware. Then firmware can optimize power based on the indicated workload type. User space also uses workload type requests to implement its own heuristics. The firmware in Meteor Lake processor generation is capable of predicting workload type without software help. To avoid duplicate processing, add a sysfs interface allowing user space to obtain the workload hint from the firmware instead of trying to predict the workload type by itself. This workload hint is passed from the firmware via MMIO offset 0x5B18 of the processor thermal PCI device. Before workload hints can be produced by the firmware, it needs to be configured via a mailbox command. This mailbox command turns ON the workload hint and it allows to program a notification delay to control the rate of notifications. The notification delay can be changed from user space vis sysfs. Attribute group 'workload_hint' in sysfs is used for implementing the workload hints interface between user space and the kernel. It contains the following attributes: workload_type_enable: Enables/disables workload type hints from the firmware. notification_delay_ms: Notification delay in milliseconds. workload_type_index: The current workload type index predicted by the firmware (see the documentation changes below for supported index values and their meaning). Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> [ rjw: Changelog edits, documentation edits, whitespace adjustments ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-09-05Merge tag 'ata-6.6-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata Pull ata updates from Damien Le Moal: - Fix OF include file for ata platform drivers (Rob) - Simplify various ahci, sata and pata platform drivers using the function devm_platform_ioremap_resource() (Yangtao) - Cleanup libata time related argument types (e.g. timeouts values) (Sergey) - Cleanup libata code around error handling as all ata drivers now define a error_handler operation (Hannes and Niklas) - Remove functions intended for libsas that are in fact unused (Niklas) - Change the remove device callback of platform drivers to a null function (Uwe) - Simplify the pata_imx driver using devm_clk_get_enabled() (Li) - Remove old and uinused remnants of the ide code in arm, parisc, powerpc, sparc and m68k architectures and associated drivers (pata_buddha, pata_falcon and pata_gayle) (Geert) - Add missing MODULE_DESCRIPTION() in the sata_gemini and pata_ftide010 drivers (me) - Several fixes for the pata_ep93xx and pata_falcon drivers (Nikita, Michael) - Add Elkhart Lake AHCI controller support to the ahci driver (Werner) - Disable NCQ trim on Micron 1100 drives (Pawel) * tag 'ata-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata: (60 commits) ata: libata-core: Disable NCQ_TRIM on Micron 1100 drives ata: ahci: Add Elkhart Lake AHCI controller ata: pata_falcon: add data_swab option to byte-swap disk data ata: pata_falcon: fix IO base selection for Q40 ata: pata_ep93xx: use soc_device_match for UDMA modes ata: pata_ep93xx: fix error return code in probe ata: sata_gemini: Add missing MODULE_DESCRIPTION ata: pata_ftide010: Add missing MODULE_DESCRIPTION m68k: Remove <asm/ide.h> ata: pata_gayle: Remove #include <asm/ide.h> ata: pata_falcon: Remove #include <asm/ide.h> ata: pata_buddha: Remove #include <asm/ide.h> asm-generic: Remove ide_iops.h sparc: Remove <asm/ide.h> powerpc: Remove <asm/ide.h> parisc: Remove <asm/ide.h> ARM: Remove <asm/ide.h> ata: pata_imx: Use helper function devm_clk_get_enabled() ata: sata_rcar: Convert to platform remove callback returning void ata: sata_mv: Convert to platform remove callback returning void ...
2023-09-01Merge tag 'media/v6.6-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: - new i2c drivers: ds90ub913, ds90ub953, ds90ub960, dw9719, ds90ub913 - new Intel IVSC MEI drivers - some Mediatek platform drivers were moved to a common location - Intel atomisp2 driver is now working with the main ov2680 driver. Due to that, the atomisp2 ov2680 staging one was removed - the bttv driver was finally converted to videobuf2 framework. This was the last one upstream using videobuf version 1 core. We'll likely remove the old videobuf framework on 6.7 - lots of improvements at atomisp driver: it now works with normal I2C sensors. Several compile-mode dependecies to select between ISP2400 and ISP2401 are now solved in runtime - a new ipu-bridge logic was added to work with IVSC MEI drivers - venus driver gained better support for new VPU versions - the v4l core async framework has gained lots of improvements and cleanups - lots of other cleanups, improvements and driver fixes * tag 'media/v6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (358 commits) media: ivsc: Add ACPI dependency media: bttv: convert to vb2 media: bttv: use audio defaults for winfast2000 media: bttv: refactor bttv_set_dma() media: bttv: move vbi_skip/vbi_count out of buffer media: bttv: remove crop info from bttv_buffer media: bttv: remove tvnorm field from bttv_buffer media: bttv: remove format field from bttv_buffer media: bttv: move do_crop flag out of bttv_fh media: bttv: copy vbi_fmt from bttv_fh media: bttv: copy vid fmt/width/height from fh media: bttv: radio use v4l2_fh instead of bttv_fh media: bttv: replace BUG with WARN_ON media: bttv: use video_drvdata to get bttv media: i2c: rdacm21: Fix uninitialized value media: coda: Remove duplicated include media: vivid: fix the racy dev->radio_tx_rds_owner media: i2c: ccs: Check rules is non-NULL media: i2c: ds90ub960: Fix PLL config for 1200 MHz CSI rate media: i2c: ds90ub953: Fix use of uninitialized variables ...
2023-09-01Merge tag 'char-misc-6.6-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver updates from Greg KH: "Here is the big set of char/misc and other small driver subsystem changes for 6.6-rc1. Stuff all over the place here, lots of driver updates and changes and new additions. Short summary is: - new IIO drivers and updates - Interconnect driver updates - fpga driver updates and additions - fsi driver updates - mei driver updates - coresight driver updates - nvmem driver updates - counter driver updates - lots of smaller misc and char driver updates and additions All of these have been in linux-next for a long time with no reported problems" * tag 'char-misc-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (267 commits) nvmem: core: Notify when a new layout is registered nvmem: core: Do not open-code existing functions nvmem: core: Return NULL when no nvmem layout is found nvmem: core: Create all cells before adding the nvmem device nvmem: u-boot-env:: Replace zero-length array with DECLARE_FLEX_ARRAY() helper nvmem: sec-qfprom: Add Qualcomm secure QFPROM support dt-bindings: nvmem: sec-qfprom: Add bindings for secure qfprom dt-bindings: nvmem: Add compatible for QCM2290 nvmem: Kconfig: Fix typo "drive" -> "driver" nvmem: Explicitly include correct DT includes nvmem: add new NXP QorIQ eFuse driver dt-bindings: nvmem: Add t1023-sfp efuse support dt-bindings: nvmem: qfprom: Add compatible for MSM8226 nvmem: uniphier: Use devm_platform_get_and_ioremap_resource() nvmem: qfprom: do some cleanup nvmem: stm32-romem: Use devm_platform_get_and_ioremap_resource() nvmem: rockchip-efuse: Use devm_platform_get_and_ioremap_resource() nvmem: meson-mx-efuse: Convert to devm_platform_ioremap_resource() nvmem: lpc18xx_otp: Convert to devm_platform_ioremap_resource() nvmem: brcm_nvram: Use devm_platform_get_and_ioremap_resource() ...
2023-09-01Merge tag 'tty-6.6-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial driver updates from Greg KH: "Here is the big set of tty and serial driver changes for 6.6-rc1. Lots of cleanups in here this cycle, and some driver updates. Short summary is: - Jiri's continued work to make the tty code and apis be a bit more sane with regards to modern kernel coding style and types - cpm_uart driver updates - n_gsm updates and fixes - meson driver updates - sc16is7xx driver updates - 8250 driver updates for different hardware types - qcom-geni driver fixes - tegra serial driver change - stm32 driver updates - synclink_gt driver cleanups - tty structure size reduction All of these have been in linux-next this week with no reported issues. The last bit of cleanups from Jiri and the tty structure size reduction came in last week, a bit late but as they were just style changes and size reductions, I figured they should get into this merge cycle so that others can work on top of them with no merge conflicts" * tag 'tty-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (199 commits) tty: shrink the size of struct tty_struct by 40 bytes tty: n_tty: deduplicate copy code in n_tty_receive_buf_real_raw() tty: n_tty: extract ECHO_OP processing to a separate function tty: n_tty: unify counts to size_t tty: n_tty: use u8 for chars and flags tty: n_tty: simplify chars_in_buffer() tty: n_tty: remove unsigned char casts from character constants tty: n_tty: move newline handling to a separate function tty: n_tty: move canon handling to a separate function tty: n_tty: use MASK() for masking out size bits tty: n_tty: make n_tty_data::num_overrun unsigned tty: n_tty: use time_is_before_jiffies() in n_tty_receive_overrun() tty: n_tty: use 'num' for writes' counts tty: n_tty: use output character directly tty: n_tty: make flow of n_tty_receive_buf_common() a bool Revert "tty: serial: meson: Add a earlycon for the T7 SoC" Documentation: devices.txt: Fix minors for ttyCPM* Documentation: devices.txt: Remove ttySIOC* Documentation: devices.txt: Remove ttyIOC* serial: 8250_bcm7271: improve bcm7271 8250 port ...
2023-09-01Merge tag 'usb-6.6-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB / Thunderbolt / PHY driver updates from Greg KH: "Here is the big set of USB, Thunderbolt, and PHY driver updates for 6.6-rc1. Included in here are: - PHY driver additions and cleanups - Thunderbolt minor additions and fixes - USB MIDI 2 gadget support added - dwc3 driver updates and additions - Removal of some old USB wireless code that was missed when that codebase was originally removed a few years ago, cleaning up some core USB code paths - USB core potential use-after-free fixes that syzbot from different people/groups keeps tripping over - typec updates and additions - gadget fixes and cleanups - loads of smaller USB core and driver cleanups all over the place Full details are in the shortlog. All of these have been in linux-next for a while with no reported problems" * tag 'usb-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (154 commits) platform/chrome: cros_ec_typec: Configure Retimer cable type tcpm: Avoid soft reset when partner does not support get_status usb: typec: tcpm: reset counter when enter into unattached state after try role usb: typec: tcpm: set initial svdm version based on pd revision USB: serial: option: add FOXCONN T99W368/T99W373 product USB: serial: option: add Quectel EM05G variant (0x030e) usb: dwc2: add pci_device_id driver_data parse support usb: gadget: remove max support speed info in bind operation usb: gadget: composite: cleanup function config_ep_by_speed_and_alt() usb: gadget: config: remove max speed check in usb_assign_descriptors() usb: gadget: unconditionally allocate hs/ss descriptor in bind operation usb: gadget: f_uvc: change endpoint allocation in uvc_function_bind() usb: gadget: add a inline function gether_bitrate() usb: gadget: use working speed to calcaulate network bitrate and qlen dt-bindings: usb: samsung,exynos-dwc3: Add Exynos850 support usb: dwc3: exynos: Add support for Exynos850 variant usb: gadget: udc-xilinx: fix incorrect type in assignment warning usb: gadget: udc-xilinx: fix cast from restricted __le16 warning usb: gadget: udc-xilinx: fix restricted __le16 degrades to integer warning USB: dwc2: hande irq on dead controller correctly ...
2023-08-30Merge tag 'vfio-v6.6-rc1' of https://github.com/awilliam/linux-vfioLinus Torvalds
Pull VFIO updates from Alex Williamson: - VFIO direct character device (cdev) interface support. This extracts the vfio device fd from the container and group model, and is intended to be the native uAPI for use with IOMMUFD (Yi Liu) - Enhancements to the PCI hot reset interface in support of cdev usage (Yi Liu) - Fix a potential race between registering and unregistering vfio files in the kvm-vfio interface and extend use of a lock to avoid extra drop and acquires (Dmitry Torokhov) - A new vfio-pci variant driver for the AMD/Pensando Distributed Services Card (PDS) Ethernet device, supporting live migration (Brett Creeley) - Cleanups to remove redundant owner setup in cdx and fsl bus drivers, and simplify driver init/exit in fsl code (Li Zetao) - Fix uninitialized hole in data structure and pad capability structures for alignment (Stefan Hajnoczi) * tag 'vfio-v6.6-rc1' of https://github.com/awilliam/linux-vfio: (53 commits) vfio/pds: Send type for SUSPEND_STATUS command vfio/pds: fix return value in pds_vfio_get_lm_file() pds_core: Fix function header descriptions vfio: align capability structures vfio/type1: fix cap_migration information leak vfio/fsl-mc: Use module_fsl_mc_driver macro to simplify the code vfio/cdx: Remove redundant initialization owner in vfio_cdx_driver vfio/pds: Add Kconfig and documentation vfio/pds: Add support for firmware recovery vfio/pds: Add support for dirty page tracking vfio/pds: Add VFIO live migration support vfio/pds: register with the pds_core PF pds_core: Require callers of register/unregister to pass PF drvdata vfio/pds: Initial support for pds VFIO driver vfio: Commonize combine_ranges for use in other VFIO drivers kvm/vfio: avoid bouncing the mutex when adding and deleting groups kvm/vfio: ensure kvg instance stays around in kvm_vfio_group_add() docs: vfio: Add vfio device cdev description vfio: Compile vfio_group infrastructure optionally vfio: Move the IOMMU_CAP_CACHE_COHERENCY check in __vfio_register_dev() ...
2023-08-30Merge tag 'docs-6.6' of git://git.lwn.net/linuxLinus Torvalds
Pull documentation updates from Jonathan Corbet: "Documentation work keeps chugging along; this includes: - Work from Carlos Bilbao to integrate rustdoc output into the generated HTML documentation. This took some work to figure out how to do it without slowing the docs build and without creating people who don't have Rust installed, but Carlos got there - Move the loongarch and mips architecture documentation under Documentation/arch/ - Some more maintainer documentation from Jakub ... plus the usual assortment of updates, translations, and fixes" * tag 'docs-6.6' of git://git.lwn.net/linux: (56 commits) Docu: genericirq.rst: fix irq-example input: docs: pxrc: remove reference to phoenix-sim Documentation: serial-console: Fix literal block marker docs/mm: remove references to hmm_mirror ops and clean typos docs/zh_CN: correct regi_chg(),regi_add() to region_chg(),region_add() Documentation: Fix typos Documentation/ABI: Fix typos scripts: kernel-doc: fix macro handling in enums scripts: kernel-doc: parse DEFINE_DMA_UNMAP_[ADDR|LEN] Documentation: riscv: Update boot image header since EFI stub is supported Documentation: riscv: Add early boot document Documentation: arm: Add bootargs to the table of added DT parameters docs: kernel-parameters: Refer to the correct bitmap function doc: update params of memhp_default_state= docs: Add book to process/kernel-docs.rst docs: sparse: fix invalid link addresses docs: vfs: clean up after the iterate() removal docs: Add a section on surveys to the researcher guidelines docs: move mips under arch docs: move loongarch under arch ...
2023-08-30Merge tag 'sound-6.6-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound updates from Takashi Iwai: "We've received a fairly wide range of changes at this time, including for ALSA and ASoC core, but all of them are rather small changes. Here are some highlights: ALSA / ASoC Core: - Fixes of inconsistent locking around control API helpers - A few new control API functions and cleanups - Workarounds for potential UAFs by delayed kobj releases - Unified PCM copy ops with iov_iter - Continued efforts for ASoC API cleanups ASoC: - An adaptor to allow use of IIO DACs and ADCs in ASoC which pulls in some IIO changes - Create a library function for intlog10() and use it in the NAU8825 driver - Convert drivers to use the more modern maple tree register cache - Lots of work on the SOF framework, AMD and Intel drivers, including a lot of cleanup and new device support - Standardization of the presentation of jacks from drivers - Provision of some generic sound card DT properties - Support for AMD Van Gogh, AMD machines with MAX98388 and NAU8821, AWInic AW88261, Cirrus Logic CS35L36 and CS42L43, various Intel platforms including AVS machines with ES8336 and RT5663, Mediatek MT7986, NXP i.MX93, RealTek RT1017 and StarFive JH7110 Others: - New test coverage including ASoC and topology tests in KUnit; this also involves enabling UML builds of ALSA since that's the default KUnit test environment which pulls in the addition of some stubs to the driver - More enhancement of pcmtest driver - A few fixes / enhancements of MIDI 2.0 UMP core - Using PCI definitions in allover HD-audio code - Support for Cirrus CS35L56 and TI TAS2781 HD-audio sub-codecs - CS35L41 HD-audio sub-codec improvements - Continued emu10k1 improvements" * tag 'sound-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (693 commits) ALSA: pcm: Fix missing fixup call in compat hw_refine ioctl ASoC: dwc: i2s: Fix unused functions ALSA: usb-audio: Don't try to submit URBs after disconnection ALSA: emu10k1: add separate documentation for E-MU cards ALSA: emu10k1: more documentation updates ALSA: emu10k1: de-duplicate audigy-mixer.rst vs. sb-live-mixer.rst ALSA: ump: Fix -Wformat-truncation warnings ALSA: hda: Add missing dependency on CONFIG_EFI for Cirrus/TI sub-codecs ALSA: doc: Fix missing backquote in midi-2.0.rst ALSA: hda/realtek: Add quirk for mute LEDs on HP ENVY x360 15-eu0xxx ALSA: hda/tas2781: Switch back to use struct i2c_driver's .probe() ASoC: soc-core.c: Do not error if a DAI link component is not found ASoC: codecs: Fix error code in aw88261_i2c_probe() ASoC: audio-graph-card.c: move audio_graph_parse_of() ASoC: cs42l43: Use new-style PM runtime macros ALSA: documentation: Add description for USB MIDI 2.0 gadget driver ALSA: ump: Don't create unused substreams for static blocks ALSA: ump: Fill group names for legacy rawmidi substreams ALSA: usb-audio: Attach legacy rawmidi after probing all UMP EPs ALSA: ac97: Fix possible error value of *rac97 ...
2023-08-22interconnect: Add debugfs test clientMike Tipton
It's often useful during test, debug, and development to issue path votes from shell. Add a debugfs client for this purpose. Example usage: cd /sys/kernel/debug/interconnect/test-client/ # Configure node endpoints for the path from CPU to DDR on # qcom/sm8550. echo chm_apps > src_node echo ebi > dst_node # Get path between src_node and dst_node. This is only # necessary after updating the node endpoints. echo 1 > get # Set desired BW to 1GBps avg and 2GBps peak. echo 1000000 > avg_bw echo 2000000 > peak_bw # Vote for avg_bw and peak_bw on the latest path from "get". # Voting for multiple paths is possible by repeating this # process for different nodes endpoints. echo 1 > commit Allowing userspace to directly enable and set bus rates can be dangerous So, following in the footsteps of the regmap [0] and clk [1] frameworks, keep these userspace controls compile-time disabled without Kconfig options to enable them. Enabling this will require code changes to define INTERCONNECT_ALLOW_WRITE_DEBUGFS. [0] commit 09c6ecd39410 ("regmap: Add support for writing to regmap registers via debugfs") [1] commit 37215da5553e ("clk: Add support for setting clk_rate via debugfs") Signed-off-by: Mike Tipton <quic_mdtipton@quicinc.com> Link: https://lore.kernel.org/r/20230807142914.12480-4-quic_mdtipton@quicinc.com Signed-off-by: Georgi Djakov <djakov@kernel.org>
2023-08-22tty: tty_buffer: use __tty_insert_flip_string_flags() in tty_insert_flip_char()Jiri Slaby (SUSE)
Use __tty_insert_flip_string_flags() for the slow path of tty_insert_flip_char(). The former is generic enough, so there is no reason to reimplement the injection once again. So now we have a single function stuffing into tty buffers. Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org> Link: https://lore.kernel.org/r/20230816105530.3335-8-jirislaby@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-22tty: tty_buffer: unify tty_insert_flip_string_{fixed_flag,flags}()Jiri Slaby (SUSE)
They both do the same except for flags. One mem-copies the flags from the caller, the other mem-sets to one flag given by the caller. This can be unified with a simple if in the unified function. Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org> Link: https://lore.kernel.org/r/20230816105530.3335-4-jirislaby@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-21doc: uapi: Add document describing dma-buf semanticsDaniel Stone
Since there's a lot of confusion around this, document both the rules and the best practices around negotiating, allocating, importing, and using buffers when crossing context/process/device/subsystem boundaries. This ties up all of dma-buf, formats and modifiers, and their usage. Signed-off-by: Daniel Stone <daniels@collabora.com> Signed-off-by: Simon Ser <contact@emersion.fr> Reviewed-by: Simon Ser <contact@emersion.fr> Reviewed-by: Sui Jingfeng <suijingfeng@loongson.cn> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20230803154908.105124-4-daniels@collabora.com
2023-08-21doc: dma-buf: Rewrite intro section a littleDaniel Stone
Make it a little bit more clear what's going on and fix some formatting. Signed-off-by: Daniel Stone <daniels@collabora.com> Signed-off-by: Simon Ser <contact@emersion.fr> Reviewed-by: Simon Ser <contact@emersion.fr> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20230803154908.105124-3-daniels@collabora.com
2023-08-10media: Add MIPI CCI register access helper functionsHans de Goede
The CSI2 specification specifies a standard method to access camera sensor registers called "Camera Control Interface (CCI)". This uses either 8 or 16 bit (big-endian wire order) register addresses and supports 8, 16, 24 or 32 bit (big-endian wire order) register widths. Currently a lot of Linux camera sensor drivers all have their own custom helpers for this, often copy and pasted from other drivers. Add a set of generic helpers for this so that all sensor drivers can switch to a single common implementation. These helpers take an extra optional "int *err" function parameter, this can be used to chain a bunch of register accesses together with only a single error check at the end, rather than needing to error check each individual register access. The first failing call will set the contents of err to a non 0 value and all other calls will then become no-ops. Link: https://lore.kernel.org/linux-media/59aefa7f-7bf9-6736-6040-39551329cd0a@redhat.com/ Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Tested-by: Tommaso Merciai <tomm.merciai@gmail.com> Reviewed-by: Tommaso Merciai <tomm.merciai@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-08-10media: Documentation: media: cec: describe new callbacksHans Verkuil
Describe the new callbacks and clarify when the adap->lock mutex is held or not. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-08-10media: Documentation: v4l: Document sub-device notifiersSakari Ailus
Document that sub-device notifiers are now registered using v4l2_async_subdev_nf_init(). No documentation is changed as it seems that sub-device notifiers were not documented apart from kernel-doc comments. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Tested-by: Philipp Zabel <p.zabel@pengutronix.de> # imx6qp Tested-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> # rcar + adv746x Tested-by: Aishwarya Kothari <aishwarya.kothari@toradex.com> # Apalis i.MX6Q with TC358743 Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> # Renesas RZ/G2L SMARC Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
generated by cgit (git 2.34.1) at 2024-07-02 17:31:55 +0000