summaryrefslogtreecommitdiff
path: root/Documentation/media
AgeCommit message (Collapse)Author
2017-05-05Merge tag 'media/v4.12-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: "Media updates for v4.12-rc1: - new driver to support mediatek jpeg in hardware codec - rc-lirc, s5p-cec and st-cec staging drivers got promoted - hardware histogram support for vsp1 driver - added Virtual Media Controller driver, to make easier to test the media controller - added a new CEC driver (rainshadow-cec) - removed two staging LIRC drivers for obscure hardware that are too obsolete - added support for Intel SR300 Depth camera - some improvements at CEC and RC core - lots of driver cleanups, improvements all over the tree With this series, we're finally getting rid of the LIRC staging driver. There's just one left (lirc_zilog), with require more care, as part of its functionality (IR RX) is already provided by another driver. Work in progress to convert it on the proper way" * tag 'media/v4.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (304 commits) [media] ov2640: print error if devm_*_optional*() fails [media] atmel-isc: Fix the static checker warning [media] ov2640: add support for MEDIA_BUS_FMT_YVYU8_2X8 and MEDIA_BUS_FMT_VYUY8_2X8 [media] ov2640: fix vflip control [media] ov2640: fix duplicate width+height returning from ov2640_select_win() [media] ov2640: add missing write to size change preamble [media] ov2640: add information about DSP register 0xc7 [media] ov2640: improve banding filter register definitions/documentation [media] ov2640: fix init sequence alignment [media] ov2640: make GPIOLIB an optional dependency [media] xc5000: fix spelling mistake: "calibration" [media] vidioc-queryctrl.rst: fix menu/int menu references [media] media-entity: only call dev_dbg_obj if mdev is not NULL [media] pixfmt-meta-vsp1-hgo.rst: remove spurious '-' [media] mtk-vcodec: avoid warnings because of empty macros [media] coda: bump maximum number of internal framebuffers to 17 [media] media: mtk-vcodec: remove informative log [media] subdev-formats.rst: remove spurious '-' [media] dw2102: limit messages to buffer size [media] ttusb2: limit messages to buffer size ...
2017-05-04Merge tag 'usb-4.12-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB updates from Greg KH: "Here is the big USB patchset for 4.12-rc1. Lots of good stuff here, after many many many attempts, the kernel finally has a working typeC interface, many thanks to Heikki and Guenter and others who have taken the time to get this merged. It wasn't an easy path for them at all. There's also a staging driver that uses this new api, which is why it's coming in through this tree. Along with that, there's the usual huge number of changes for gadget drivers, xhci, and other stuff. Johan also finally refactored pretty much every driver that was looking at USB endpoints to do it in a common way, which will help prevent any "badly-formed" devices from causing problems in drivers. That too wasn't a simple task. All of these have been in linux-next for a while with no reported issues" * tag 'usb-4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (263 commits) staging: typec: Fairchild FUSB302 Type-c chip driver staging: typec: Type-C Port Controller Interface driver (tcpci) staging: typec: USB Type-C Port Manager (tcpm) usb: host: xhci: remove #ifdef around PM functions usb: musb: don't mark of_dev_auxdata as initdata usb: misc: legousbtower: Fix buffers on stack USB: Revert "cdc-wdm: fix "out-of-sync" due to missing notifications" usb: Make sure usb/phy/of gets built-in USB: storage: e-mail update in drivers/usb/storage/unusual_devs.h usb: host: xhci: print correct command ring address usb: host: xhci: delete sp_dma_buffers for scratchpad usb: host: xhci: using correct specification chapter reference for DCBAAP xhci: switch to pci_alloc_irq_vectors usb: host: xhci-plat: set resume_quirk() for R-Car controllers usb: host: xhci-plat: add resume_quirk() usb: host: xhci-plat: enable clk in resume timing usb: host: plat: Enable xHCI plat runtime PM USB: serial: ftdi_sio: add device ID for Microsemi/Arrow SF2PLUS Dev Kit USB: serial: constify static arrays usb: fix some references for /proc/bus/usb ...
2017-05-03Merge tag 'drm-for-v4.12' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds
Pull drm u pdates from Dave Airlie: "This is the main drm pull request for v4.12. Apart from two fixes pulls, everything should have been in drm-next for at least 2 weeks. The biggest thing in here is AMD released the public headers for their upcoming VEGA GPUs. These as always are quite a sizeable chunk of header files. They've also added initial non-display support for those GPUs, though they aren't available in production yet. Otherwise it's pretty much normal. New bridge drivers: - megachips-stdpxxxx-ge-b850v3-fw LVDS->DP++ - generic LVDS bridge support. Core: - Displayport link train failure reporting to userspace - debugfs interface cleaned up - subsystem TODO in kerneldoc now - Extended fbdev support (flipping and vblank wait) - drm_platform removed - EDP CRC support in helper - HF-VSDB SCDC support in EDID parser - Lots of code cleanups and header extraction - Thunderbolt external GPU awareness - Atomic helper improvements - Documentation improvements panel: - Sitronix and Samsung new panel support amdgpu: - Preliminary vega10 support - Multi-level page table support - GPU sensor support for userspace - PRT support for sparse buffers - SR-IOV improvements - Non-contig VRAM CPU mapping i915: - Atomic modesetting enabled by default on Gen5+ - LSPCON improvements - Atomic state handling for cdclk - GPU reset improvements - In-kernel unit tests - Geminilake improvements and color manager support - Designware i2c fixes - vblank evasion improvements - Hotplug safe connector iterators - GVT scheduler QoS support - GVT Kabylake support nouveau: - Acceleration support for Pascal (GP10x). - Rearchitecture of code handling proprietary signed firmware - Fix GTX 970 with odd MMU configuration - GP10B support - GP107 acceleration support vmwgfx: - Atomic modesetting support for vmwgfx omapdrm: - Support for render nodes - Refactor omapdss code - Fix some probe ordering issues - Fix too dark RGB565 rendering sunxi: - prelim rework for multiple pipes. mali-dp: - Color management support - Plane scaling - Power management improvements imx-drm: - Prefetch Resolve Engine/Gasket on i.MX6QP - Deferred plane disabling - Separate alpha support mediatek: - Mediatek SoC MT2701 support rcar-du: - Gen3 HDMI support msm: - 4k support for newer chips - OPP bindings for gpu - prep work for per-process pagetables vc4: - HDMI audio support - fixes qxl: - minor fixes. dw-hdmi: - PHY improvements - CSC fixes - Amlogic GX SoC support" * tag 'drm-for-v4.12' of git://people.freedesktop.org/~airlied/linux: (1778 commits) drm/nouveau/fb/gf100-: Fix 32 bit wraparound in new ram detection drm/nouveau/secboot/gm20b: fix the error return code in gm20b_secboot_tegra_read_wpr() drm/nouveau/kms: Increase max retries in scanout position queries. drm/nouveau/bios/bitP: check that table is long enough for optional pointers drm/nouveau/fifo/nv40: no ctxsw for pre-nv44 mpeg engine drm: mali-dp: use div_u64 for expensive 64-bit divisions drm/i915: Confirm the request is still active before adding it to the await drm/i915: Avoid busy-spinning on VLV_GLTC_PW_STATUS mmio drm/i915/selftests: Allocate inode/file dynamically drm/i915: Fix system hang with EI UP masked on Haswell drm/i915: checking for NULL instead of IS_ERR() in mock selftests drm/i915: Perform link quality check unconditionally during long pulse drm/i915: Fix use after free in lpe_audio_platdev_destroy() drm/i915: Use the right mapping_gfp_mask for final shmem allocation drm/i915: Make legacy cursor updates more unsynced drm/i915: Apply a cond_resched() to the saturated signaler drm/i915: Park the signaler before sleeping drm: mali-dp: Check the mclk rate and allow up/down scaling drm: mali-dp: Enable image enhancement when scaling drm: mali-dp: Add plane upscaling support ...
2017-05-02Merge tag 'docs-4.12' of git://git.lwn.net/linuxLinus Torvalds
Pull documentation update from Jonathan Corbet: "A reasonably busy cycle for documentation this time around. There is a new guide for user-space API documents, rather sparsely populated at the moment, but it's a start. Markus improved the infrastructure for converting diagrams. Mauro has converted much of the USB documentation over to RST. Plus the usual set of fixes, improvements, and tweaks. There's a bit more than the usual amount of reaching out of Documentation/ to fix comments elsewhere in the tree; I have acks for those where I could get them" * tag 'docs-4.12' of git://git.lwn.net/linux: (74 commits) docs: Fix a couple typos docs: Fix a spelling error in vfio-mediated-device.txt docs: Fix a spelling error in ioctl-number.txt MAINTAINERS: update file entry for HSI subsystem Documentation: allow installing man pages to a user defined directory Doc/PM: Sync with intel_powerclamp code behavior zr364xx.rst: usb/devices is now at /sys/kernel/debug/ usb.rst: move documentation from proc_usb_info.txt to USB ReST book convert philips.txt to ReST and add to media docs docs-rst: usb: update old usbfs-related documentation arm: Documentation: update a path name docs: process/4.Coding.rst: Fix a couple of document refs docs-rst: fix usb cross-references usb: gadget.h: be consistent at kernel doc macros usb: composite.h: fix two warnings when building docs usb: get rid of some ReST doc build errors usb.rst: get rid of some Sphinx errors usb/URB.txt: convert to ReST and update it usb/persist.txt: convert to ReST and add to driver-api book usb/hotplug.txt: convert to ReST and add to driver-api book ...
2017-05-01docs: remove all references to AVR32 architectureHans-Christian Noren Egtvedt
The AVR32 architecture support has been removed from the Linux kernel, hence remove all references to it from Documentation. Signed-off-by: Hans-Christian Noren Egtvedt <egtvedt@samfundet.no> Signed-off-by: Håvard Skinnemoen <hskinnemoen@gmail.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com> Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2017-04-20zr364xx.rst: usb/devices is now at /sys/kernel/debug/Mauro Carvalho Chehab
The /proc/bus/usb/devices got moved to sysfs. It is now sitting at: /sys/kernel/debug/usb/devices Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2017-04-20convert philips.txt to ReST and add to media docsMauro Carvalho Chehab
The philips.txt file were at the wrong place: it should be, instead, at Documentation/media. Move and convert it. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2017-04-19[media] vidioc-queryctrl.rst: fix menu/int menu referencesMauro Carvalho Chehab
The documentation incorrectly mentions MENU and INTEGER_MENU at struct v4l2_querymenu table as if they were flags. They're not: they're types. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-04-19[media] pixfmt-meta-vsp1-hgo.rst: remove spurious '-'Mauro Carvalho Chehab
Remove spurious '-' in the VSP1 hgo table. This resulted in a weird dot character that also caused the row to be double-height. We used to have it on other tables, but we got rid of them on changeset 8ed29e302dd1 ("[media] subdev-formats.rst: remove spurious '-'"). Fixes: 14d665387165 ("[media] v4l: Define a pixel format for the R-Car VSP1 1-D histogram engine") Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-04-19[media] subdev-formats.rst: remove spurious '-'Hans Verkuil
Remove spurious duplicate '-' in the Bayer Formats description. This resulted in a weird dot character that also caused the row to be double-height. The - character was probably used originally as indicator of an unused bit, but as the number of columns was increased it was never used for the new columns. Other tables do not use '-' either, so just remove it. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-04-17[media] docs-rst: Make the CSI-2 bus initialisation documentation match realitySakari Ailus
Update the CSI-2 bus documentation to tell that the LP-11 mode is not mandatory as there are transmitters that cannot be explicitly set to LP-11 mode. Instead, say that this what the transmitter drivers shall do if possible. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-04-14[media] buffer.rst: clarify how V4L2_CTRL_FLAG_MODIFY_LAYOUT/GRABBER are usedHans Verkuil
Explain when the V4L2_CTRL_FLAG_MODIFY_LAYOUT and V4L2_CTRL_FLAG_MODIFY_GRABBER flags should be used. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-04-14[media] vidioc-queryctrl.rst: document V4L2_CTRL_FLAG_MODIFY_LAYOUTHans Verkuil
Document this new control flag. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-04-14[media] v4l: Define a pixel format for the R-Car VSP1 2-D histogram engineNiklas Söderlund
The format is used on the R-Car VSP1 video queues that carry 2-D histogram statistics data. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-04-14[media] v4l: Define a pixel format for the R-Car VSP1 1-D histogram engineLaurent Pinchart
The format is used on the R-Car VSP1 video queues that carry 1-D histogram statistics data. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-04-14[media] v4l: Add metadata buffer type and formatLaurent Pinchart
The metadata buffer type is used to transfer metadata between userspace and kernelspace through a V4L2 buffers queue. It comes with a new metadata capture capability and format description. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Tested-by: Guennadi Liakhovetski <guennadi.liakhovetski@intel.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> [hans.verkuil@cisco.com: removed left-over 'experimental' note] [hans.verkuil@cisco.com: add newline after _v4l2-meta-format label] Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-04-14[media] v4l: Clearly document interactions between formats, controls and buffersLaurent Pinchart
V4L2 exposes parameters that influence buffers sizes through the format ioctls (VIDIOC_G_FMT, VIDIOC_TRY_FMT, VIDIOC_S_FMT, and possibly VIDIOC_G_SELECTION and VIDIOC_S_SELECTION). Other parameters not part of the format structure may also influence buffer sizes or buffer layout in general. One existing such parameter is rotation, which is implemented by the V4L2_CID_ROTATE control and thus exposed through the V4L2 control ioctls. The interaction between those parameters and buffers is currently only partially specified by the V4L2 API. In particular interactions between controls and buffers isn't specified at all. The behaviour of the VIDIOC_S_FMT and VIDIOC_S_SELECTION ioctls when buffers are allocated is also not fully specified. This patch clearly defines and documents the interactions between formats, selections, controls and buffers. The preparatory discussions for the documentation change considered completely disallowing controls that change the buffer size or layout, in favour of extending the format API with a new ioctl that would bundle those controls with format information. The idea has been rejected, as this would essentially be a restricted version of the upcoming request API that wouldn't bring any additional value. Another option we have considered was to mandate the use of the request API to modify controls that influence buffer size or layout. This has also been rejected on the grounds that requiring the request API to change rotation even when streaming is stopped would significantly complicate implementation of drivers and usage of the V4L2 API for applications. Applications will however be required to use the upcoming request API to change at runtime formats or controls that influence the buffer size or layout, because of the need to synchronize buffers with the formats and controls. Otherwise there would be no way to interpret the content of a buffer correctly. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-04-10[media] dev-capture.rst/dev-output.rst: video standards ioctls are optionalHans Verkuil
The documentation for video capture and output devices claims that the video standard ioctls are required. This is not the case, they are only required for PAL/NTSC/SECAM type inputs and outputs. Sensors do not implement this at all and e.g. HDMI inputs implement the DV Timings ioctls. Just drop the mention of 'video standard' ioctls. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-04-10[media] Documentation: Intel SR300 Depth camera INZI formatEvgeni Raikhel
Provide the frame structure and data layout of V4L2-PIX-FMT-INZI format utilized by Intel SR300 Depth camera. Signed-off-by: Evgeni Raikhel <evgeni.raikhel@intel.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-04-10[media] vidioc-enumin/output.rst: improve documentationHans Verkuil
The V4L2_INPUT_TYPE_CAMERA and V4L2_OUTPUT_TYPE_ANALOG descriptions were hopelessly out of date. Fix this, and also fix a few style issues in these documents. Finally add the missing documentation for V4L2_OUTPUT_TYPE_ANALOGVGAOVERLAY (only used by the zoran driver). Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-04-10[media] video.rst: a sensor is also considered to be a physical inputHans Verkuil
Add the line "Camera sensors are also considered to be a video input." In practice all non-MC drivers for sensors support the input ioctls, and the compliance test actually tests for the presence of these ioctls. So clarify the documentation by explicitly mentioning sensors. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-04-05[media] cec-core.rst: document the new cec_get_drvdata() helperHans Verkuil
Document the new cec_get_drvdata() helper function. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-04-05[media] doc: kapi: fix typoBaruch Siach
Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-04-03documentation: media: Add documentation for new RGB and YUV bus formatsNeil Armstrong
Add documentation for added Bus Formats to describe RGB and YUV formats used as input to the Synopsys DesignWare HDMI TX Controller. Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Reviewed-by: Archit Taneja <architt@codeaurora.org> Acked-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: http://patchwork.freedesktop.org/patch/msgid/1491230558-10804-4-git-send-email-narmstrong@baylibre.com
2017-03-24[media] lirc: document lirc modes betterSean Young
LIRC_MODE_MODE2 and LIRC_MODE_LIRCCODE were not covered at all. Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-03-22[media] docs-rst: media: Push CEC documentation under CEC sectionSakari Ailus
The CEC documentation added two sections on the main media kAPI level. There should be only one. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-03-22[media] docs-rst: media: Explicitly refer to sub-sampling in scaling ↵Sakari Ailus
documentation Skipping, which is sometimes used in terminology related to sensors when referring to sub-sampling is replaced by more suitable sub-sampling instead. Skipping is retained in a note in parentheses. Suggested-by: Russell King <rmk+kernel@armlinux.org.uk> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-03-22[media] cec: document the special unconfigured caseHans Verkuil
Even when the CEC device is unconfigured due to an invalid physical address it is still allowed to send a message from 0xf (Unregistered) to 0 (TV). This is a corner case explicitly allowed by the CEC specification. Document this corner case. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-03-22[media] cec: document the error codesHans Verkuil
Document all the various error codes returned by the CEC ioctls. These were never documented, instead the documentation relied on a reference to the generic error codes, but that's not sufficient. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-03-22[media] cec: documentation fixesHans Verkuil
Fixed a few spelling mistakes, but mostly incorrect rst syntax that caused wrong references or font style. No actual documentation changes, just fixes. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-03-22[media] videodev2.h: map xvYCC601/709 to limited range quantizationHans Verkuil
The xvYCC601/709 encodings were mapped by default to full range quantization. This is actually wrong since these encodings use limited range quantization, but accept values outside of the limited range. This makes sense since for values within the limited range it behaves exactly the same as BT.601 or Rec. 709. The only difference is that with the xvYCC encodings the values outside of the limited range also produce value colors. Talking to people who know a lot more about this than I do made me realize that mapping xvYCC to full range quantization was wrong, so this patch corrects this and also improves the documentation. These formats are very rare, and since the formula for decoding these Y'CbCr encodings is actually fixed and independent of the quantization field value it is safe to make this change. The main advantage is that keeps the V4L2 specification in sync with the corresponding colorspace, HDMI and CEA861 standards when it comes to these xvYCC formats. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-03-13docs-rst: Don't use explicit Makefile rules to build SVG and DOT filesMauro Carvalho Chehab
Now that we have an extension to handle images, use it. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2017-03-06Merge tag 'v4.11-rc1' into patchworkMauro Carvalho Chehab
Linux 4.11-rc1 * tag 'v4.11-rc1': (10730 commits) Linux 4.11-rc1 strparser: destroy workqueue on module exit Documentation/sphinx: fix primary_domain configuration docs: Fix htmldocs build failure doc/ko_KR/memory-barriers: Update control-dependencies section pcieaer doc: update the link Documentation: Update path to sysrq.txt sfc: fix IPID endianness in TSOv2 sfc: avoid max() in array size rds: remove unnecessary returned value check rxrpc: Fix potential NULL-pointer exception nfp: correct DMA direction in XDP DMA sync nfp: don't tell FW about the reserved buffer space net: ethernet: bgmac: mac address change bug net: ethernet: bgmac: init sequence bug xen-netback: don't vfree() queues under spinlock xen-netback: keep a local pointer for vif in backend_disconnect() netfilter: nf_tables: don't call nfnetlink_set_err() if nfnetlink_send() fails netfilter: nft_set_rbtree: incorrect assumption on lower interval lookups netfilter: nf_conntrack_sip: fix wrong memory initialisation ...
2017-03-04Merge tag 'docs-4.11-fixes' of git://git.lwn.net/linuxLinus Torvalds
Pull documentation fixes from Jonathan Corbet: "A few fixes for the docs tree, including one for a 4.11 build regression" * tag 'docs-4.11-fixes' of git://git.lwn.net/linux: Documentation/sphinx: fix primary_domain configuration docs: Fix htmldocs build failure doc/ko_KR/memory-barriers: Update control-dependencies section pcieaer doc: update the link Documentation: Update path to sysrq.txt
2017-03-03Documentation: Update path to sysrq.txtKrzysztof Kozlowski
Commit 9d85025b0418 ("docs-rst: create an user's manual book") moved the sysrq.txt leaving old paths in the kernel docs. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2017-03-03[media] vidioc-g-dv-timings.rst: update v4l2_bt_timings structHans Verkuil
The new picture_aspect, cea861_vic and hdmi_vic fields were not documented, even though the corresponding flags were. Add documentation for these new fields. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-03-03[media] vivid: support for contiguous DMA buffersVincent ABRIOU
It allows to simulate the behavior of hardware with such limitations or to connect vivid to real hardware with such limitations. Add the "allocators" module parameter option to let vivid use the dma-contig instead of vmalloc. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Vincent Abriou <vincent.abriou@st.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Tested-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-02-27scripts/spelling.txt: add "an union" pattern and fix typo instancesMasahiro Yamada
Fix typos and add the following to the scripts/spelling.txt: an union||a union Link: http://lkml.kernel.org/r/1481573103-11329-5-git-send-email-yamada.masahiro@socionext.com Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-27scripts/spelling.txt: add "an user" pattern and fix typo instancesMasahiro Yamada
Fix typos and add the following to the scripts/spelling.txt: an user||a user an userspace||a userspace I also added "userspace" to the list since it is a common word in Linux. I found some instances for "an userfaultfd", but I did not add it to the list. I felt it is endless to find words that start with "user" such as "userland" etc., so must draw a line somewhere. Link: http://lkml.kernel.org/r/1481573103-11329-4-git-send-email-yamada.masahiro@socionext.com Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-22Merge tag 'docs-4.11' of git://git.lwn.net/linuxLinus Torvalds
Pull documentation updates from Jonathan Corbet: "A slightly quieter cycle for documentation this time around. Three more DocBook template files have been converted to RST; only 21 to go. There are various build improvements and the usual array of documentation improvements and fixes" * tag 'docs-4.11' of git://git.lwn.net/linux: (44 commits) docs / driver-api: Fix structure references in device_link.rst PM / docs: Fix structure references in device.rst Add a target to check broken external links in the Documentation Documentation: Fix linux-api list typo Documentation: DocBook/Makefile comment typo Improve sparse documentation Documentation: make Makefile.sphinx no-ops quieter Documentation: DMA-ISA-LPC.txt Documentation: input: fix path to input code definitions docs: Remove the copyright year from conf.py docs: Fix a warning in the Korean HOWTO.rst translation PM / sleep / docs: Convert PM notifiers document to reST PM / core / docs: Convert sleep states API document to reST PM / core: Update kerneldoc comments in pm.h doc-rst: Fix recursive make invocation from macros doc-rst: Delete output of failed dot-SVG conversion doc-rst: Break shell command sequences on failure Documentation/sphinx: make targets independent of Sphinx work for HAVE_SPHINX=0 doc-rst: fixed cleandoc target when used with O=dir Documentation/sphinx: prevent generation of .pyc files in the source tree ...
2017-02-22Merge tag 'v4.10' into patchworkMauro Carvalho Chehab
Linux 4.10 * tag 'v4.10': (1558 commits) Linux 4.10 Fix missing sanity check in /dev/sg scsi: don't BUG_ON() empty DMA transfers ipv6: release dst on error in ip6_dst_lookup_tail printk: use rcuidle console tracepoint ARM: multi_v7_defconfig: enable Qualcomm RPMCC irda: Fix lockdep annotations in hashbin_delete(). vxlan: fix oops in dev_fill_metadata_dst dccp: fix freeing skb too early for IPV6_RECVPKTINFO dpaa_eth: small leak on error packet: Do not call fanout_release from atomic contexts reset: fix shared reset triggered_count decrement on error ntb: ntb_hw_intel: link_poll isn't clearing the pending status properly ntb_transport: Pick an unused queue ntb: ntb_perf missing dmaengine_unmap_put NTB: ntb_transport: fix debugfs_remove_recursive Revert "nohz: Fix collision between tick and other hrtimers" vfs: fix uninitialized flags in splice_to_pipe() drm/radeon: Use mode h/vdisplay fields to hide out of bounds HW cursor ARM: 8658/1: uaccess: fix zeroing of 64-bit get_user() ...
2017-02-21Merge tag 'media/v4.11-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: - new drivers: - i.MX6 Video Data Order Adapter's (VDOA) - Toshiba et8ek8 5MP sensor - STM DELTA multi-format video decoder V4L2 driver - SPI connected IR LED - Mediatek IR remote receiver - ZyDAS ZD1301 DVB USB interface driver - new RC keymaps - some very old LIRC drivers got removed from staging - RC core gained support encoding IR scan codes - DVB si2168 gained support for DVBv5 statistics - lirc_sir driver ported to rc-core and promoted from staging - other bug fixes, board additions and driver improvements * tag 'media/v4.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (230 commits) [media] mtk-vcodec: fix build warnings without DEBUG [media] zd1301: fix building interface driver without demodulator [media] usbtv: add sharpness control [media] cxusb: Use a dma capable buffer also for reading [media] ttpci: address stringop overflow warning [media] dvb-usb-v2: avoid use-after-free [media] add Hama Hybrid DVB-T Stick support [media] et8ek8: Fix compiler / Coccinelle warnings [media] media: fix semicolon.cocci warnings [media] media: exynos4-is: add flags to dummy Exynos IS i2c adapter [media] v4l: of: check for unique lanes in data-lanes and clock-lanes [media] coda/imx-vdoa: constify structs [media] st-delta: debug: trace stream/frame information & summary [media] st-delta: add mjpeg support [media] st-delta: EOS (End Of Stream) support [media] st-delta: rpmsg ipc support [media] st-delta: add memory allocator helper functions [media] st-delta: STiH4xx multi-format video decoder v4l2 driver [media] MAINTAINERS: add st-delta driver [media] ARM: multi_v7_defconfig: enable STMicroelectronics DELTA Support ...
2017-02-15Add a target to check broken external links in the DocumentationRémy Léone
Documentation shouldn't have broken links. sphinx linkcheck builder scans all documents for external links, tries to open them with urllib2, and writes an overview which ones are broken and redirected to standard output and to output.txt in the output directory. Reviewed-by: Jani Nikula <jani.nikula@intel.com> Tested-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Rémy Léone <remy.leone@gmail.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2017-02-13[media] videodev2.h: go back to limited range Y'CbCr for SRGB and, ADOBERGBHans Verkuil
This reverts 'commit 7e0739cd9c40 ("[media] videodev2.h: fix sYCC/AdobeYCC default quantization range"). The problem is that many drivers can convert R'G'B' content (often from sensors) to Y'CbCr, but they all produce limited range Y'CbCr. To stay backwards compatible the default quantization range for sRGB and AdobeRGB Y'CbCr encoding should be limited range, not full range, even though the corresponding standards specify full range. Update the V4L2_MAP_QUANTIZATION_DEFAULT define accordingly and also update the documentation. Fixes: 7e0739cd9c40 ("[media] videodev2.h: fix sYCC/AdobeYCC default quantization range") Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Cc: <stable@vger.kernel.org> # for v4.9 and up Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-02-06doc-rst: Delete output of failed dot-SVG conversionBen Hutchings
As we use redirection to create the SVG file, even a failed conversion will create the file and 'make' will consider it up-to-date if the build is retried. We should delete it in case of failure. Fixes: ec868e4ee2bc ("docs-rst: media: build SVG from graphviz files") Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2017-01-30[media] gen-errors.rst: document EIOHans Verkuil
Document the EIO error since this can happen anywhere anytime and applications should be aware of this. Also fix typo: exaustive -> exhaustive Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-01-30[media] rc: change wakeup_protocols to list all protocol variantsSean Young
For IR wakeup, a driver has to program the hardware to wakeup at a specific IR sequence, so it makes no sense to allow multiple wakeup protocols to be selected. In the same manner the sysfs interface only allows one scancode to be provided. In addition, we need to know the specific variant of the protocol. In short, these changes are made to the wakeup_protocols sysfs entry: - list all the protocol variants rather than the protocol groups, e.g. "nec nec-x nec-32" rather than just "nec". - only allow one protocol variant to be selected rather than multiple - wakeup_filter can only be set once a protocol has been selected in wakeup_protocols. This is an API change, however the only user of this API is the img-ir, but the wakeup code was never merged to mainline, so it was never used. Signed-off-by: Sean Young <sean@mess.org> Cc: James Hogan <james.hogan@imgtec.com> Cc: Sifan Naeem <sifan.naeem@imgtec.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-01-30[media] cec-intro.rst: mention the v4l-utils package and CEC utilitiesHans Verkuil
Mention where to find the CEC utilities. Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-01-30[media] cec rst: remove "This API is not yet finalized" noticeHans Verkuil
The API is now finalized, so this notice should be dropped. Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-01-27[media] media: Rename graph and pipeline structs and functionsSakari Ailus
The media_entity_pipeline_start() and media_entity_pipeline_stop() functions are renamed as media_pipeline_start() and media_pipeline_stop(), respectively. The reason is two-fold: the pipeline struct is, rightly, already called media_pipeline (rather than media_entity_pipeline) and what this really is about is a pipeline. A pipeline consists of entities --- and, well, other objects embedded in these entities. As the pipeline object will be in the future moved from entities to pads in order to support multiple pipelines through a single entity, do the renaming now. Similarly, functions operating on struct media_entity_graph as well as the struct itself are renamed by dropping the "entity_" part from the prefix of the function family and the data structure. The graph traversal which is what the functions are about is not specifically about entities only and will operate on pads for the same reason as the media pipeline. The patch has been generated using the following command: git grep -l media_entity |xargs perl -i -pe ' s/media_entity_pipeline/media_pipeline/g; s/media_entity_graph/media_graph/g' And a few manual edits related to line start alignment and line wrapping. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>