summaryrefslogtreecommitdiff
path: root/Documentation/sysctl
AgeCommit message (Collapse)Author
2019-01-04kernel/sysctl: add panic_print into sysctlFeng Tang
So that we can also runtime chose to print out the needed system info for panic, other than setting the kernel cmdline. Link: http://lkml.kernel.org/r/1543398842-19295-3-git-send-email-feng.tang@intel.com Signed-off-by: Feng Tang <feng.tang@intel.com> Suggested-by: Steven Rostedt <rostedt@goodmis.org> Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: John Stultz <john.stultz@linaro.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Kees Cook <keescook@chromium.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-12-28mm: reclaim small amounts of memory when an external fragmentation event occursMel Gorman
An external fragmentation event was previously described as When the page allocator fragments memory, it records the event using the mm_page_alloc_extfrag event. If the fallback_order is smaller than a pageblock order (order-9 on 64-bit x86) then it's considered an event that will cause external fragmentation issues in the future. The kernel reduces the probability of such events by increasing the watermark sizes by calling set_recommended_min_free_kbytes early in the lifetime of the system. This works reasonably well in general but if there are enough sparsely populated pageblocks then the problem can still occur as enough memory is free overall and kswapd stays asleep. This patch introduces a watermark_boost_factor sysctl that allows a zone watermark to be temporarily boosted when an external fragmentation causing events occurs. The boosting will stall allocations that would decrease free memory below the boosted low watermark and kswapd is woken if the calling context allows to reclaim an amount of memory relative to the size of the high watermark and the watermark_boost_factor until the boost is cleared. When kswapd finishes, it wakes kcompactd at the pageblock order to clean some of the pageblocks that may have been affected by the fragmentation event. kswapd avoids any writeback, slab shrinkage and swap from reclaim context during this operation to avoid excessive system disruption in the name of fragmentation avoidance. Care is taken so that kswapd will do normal reclaim work if the system is really low on memory. This was evaluated using the same workloads as "mm, page_alloc: Spread allocations across zones before introducing fragmentation". 1-socket Skylake machine config-global-dhp__workload_thpfioscale XFS (no special madvise) 4 fio threads, 1 THP allocating thread -------------------------------------- 4.20-rc3 extfrag events < order 9: 804694 4.20-rc3+patch: 408912 (49% reduction) 4.20-rc3+patch1-4: 18421 (98% reduction) 4.20.0-rc3 4.20.0-rc3 lowzone-v5r8 boost-v5r8 Amean fault-base-1 653.58 ( 0.00%) 652.71 ( 0.13%) Amean fault-huge-1 0.00 ( 0.00%) 178.93 * -99.00%* 4.20.0-rc3 4.20.0-rc3 lowzone-v5r8 boost-v5r8 Percentage huge-1 0.00 ( 0.00%) 5.12 ( 100.00%) Note that external fragmentation causing events are massively reduced by this path whether in comparison to the previous kernel or the vanilla kernel. The fault latency for huge pages appears to be increased but that is only because THP allocations were successful with the patch applied. 1-socket Skylake machine global-dhp__workload_thpfioscale-madvhugepage-xfs (MADV_HUGEPAGE) ----------------------------------------------------------------- 4.20-rc3 extfrag events < order 9: 291392 4.20-rc3+patch: 191187 (34% reduction) 4.20-rc3+patch1-4: 13464 (95% reduction) thpfioscale Fault Latencies 4.20.0-rc3 4.20.0-rc3 lowzone-v5r8 boost-v5r8 Min fault-base-1 912.00 ( 0.00%) 905.00 ( 0.77%) Min fault-huge-1 127.00 ( 0.00%) 135.00 ( -6.30%) Amean fault-base-1 1467.55 ( 0.00%) 1481.67 ( -0.96%) Amean fault-huge-1 1127.11 ( 0.00%) 1063.88 * 5.61%* 4.20.0-rc3 4.20.0-rc3 lowzone-v5r8 boost-v5r8 Percentage huge-1 77.64 ( 0.00%) 83.46 ( 7.49%) As before, massive reduction in external fragmentation events, some jitter on latencies and an increase in THP allocation success rates. 2-socket Haswell machine config-global-dhp__workload_thpfioscale XFS (no special madvise) 4 fio threads, 5 THP allocating threads ---------------------------------------------------------------- 4.20-rc3 extfrag events < order 9: 215698 4.20-rc3+patch: 200210 (7% reduction) 4.20-rc3+patch1-4: 14263 (93% reduction) 4.20.0-rc3 4.20.0-rc3 lowzone-v5r8 boost-v5r8 Amean fault-base-5 1346.45 ( 0.00%) 1306.87 ( 2.94%) Amean fault-huge-5 3418.60 ( 0.00%) 1348.94 ( 60.54%) 4.20.0-rc3 4.20.0-rc3 lowzone-v5r8 boost-v5r8 Percentage huge-5 0.78 ( 0.00%) 7.91 ( 910.64%) There is a 93% reduction in fragmentation causing events, there is a big reduction in the huge page fault latency and allocation success rate is higher. 2-socket Haswell machine global-dhp__workload_thpfioscale-madvhugepage-xfs (MADV_HUGEPAGE) ----------------------------------------------------------------- 4.20-rc3 extfrag events < order 9: 166352 4.20-rc3+patch: 147463 (11% reduction) 4.20-rc3+patch1-4: 11095 (93% reduction) thpfioscale Fault Latencies 4.20.0-rc3 4.20.0-rc3 lowzone-v5r8 boost-v5r8 Amean fault-base-5 6217.43 ( 0.00%) 7419.67 * -19.34%* Amean fault-huge-5 3163.33 ( 0.00%) 3263.80 ( -3.18%) 4.20.0-rc3 4.20.0-rc3 lowzone-v5r8 boost-v5r8 Percentage huge-5 95.14 ( 0.00%) 87.98 ( -7.53%) There is a large reduction in fragmentation events with some jitter around the latencies and success rates. As before, the high THP allocation success rate does mean the system is under a lot of pressure. However, as the fragmentation events are reduced, it would be expected that the long-term allocation success rate would be higher. Link: http://lkml.kernel.org/r/20181123114528.28802-5-mgorman@techsingularity.net Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Zi Yan <zi.yan@cs.rutgers.edu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-11-01Merge tag 'stackleak-v4.20-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull stackleak gcc plugin from Kees Cook: "Please pull this new GCC plugin, stackleak, for v4.20-rc1. This plugin was ported from grsecurity by Alexander Popov. It provides efficient stack content poisoning at syscall exit. This creates a defense against at least two classes of flaws: - Uninitialized stack usage. (We continue to work on improving the compiler to do this in other ways: e.g. unconditional zero init was proposed to GCC and Clang, and more plugin work has started too). - Stack content exposure. By greatly reducing the lifetime of valid stack contents, exposures via either direct read bugs or unknown cache side-channels become much more difficult to exploit. This complements the existing buddy and heap poisoning options, but provides the coverage for stacks. The x86 hooks are included in this series (which have been reviewed by Ingo, Dave Hansen, and Thomas Gleixner). The arm64 hooks have already been merged through the arm64 tree (written by Laura Abbott and reviewed by Mark Rutland and Will Deacon). With VLAs having been removed this release, there is no need for alloca() protection, so it has been removed from the plugin" * tag 'stackleak-v4.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: arm64: Drop unneeded stackleak_check_alloca() stackleak: Allow runtime disabling of kernel stack erasing doc: self-protection: Add information about STACKLEAK feature fs/proc: Show STACKLEAK metrics in the /proc file system lkdtm: Add a test for STACKLEAK gcc-plugins: Add STACKLEAK plugin for tracking the kernel stack x86/entry: Add STACKLEAK erasing the kernel stack at the end of syscalls
2018-10-25bpf: add bpf_jit_limit knob to restrict unpriv allocationsDaniel Borkmann
Rick reported that the BPF JIT could potentially fill the entire module space with BPF programs from unprivileged users which would prevent later attempts to load normal kernel modules or privileged BPF programs, for example. If JIT was enabled but unsuccessful to generate the image, then before commit 290af86629b2 ("bpf: introduce BPF_JIT_ALWAYS_ON config") we would always fall back to the BPF interpreter. Nowadays in the case where the CONFIG_BPF_JIT_ALWAYS_ON could be set, then the load will abort with a failure since the BPF interpreter was compiled out. Add a global limit and enforce it for unprivileged users such that in case of BPF interpreter compiled out we fail once the limit has been reached or we fall back to BPF interpreter earlier w/o using module mem if latter was compiled in. In a next step, fair share among unprivileged users can be resolved in particular for the case where we would fail hard once limit is reached. Fixes: 290af86629b2 ("bpf: introduce BPF_JIT_ALWAYS_ON config") Fixes: 0a14842f5a3c ("net: filter: Just In Time compiler for x86-64") Co-Developed-by: Rick Edgecombe <rick.p.edgecombe@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Jann Horn <jannh@google.com> Cc: Kees Cook <keescook@chromium.org> Cc: LKML <linux-kernel@vger.kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-09-09Drop all 00-INDEX files from Documentation/Henrik Austad
This is a respin with a wider audience (all that get_maintainer returned) and I know this spams a *lot* of people. Not sure what would be the correct way, so my apologies for ruining your inbox. The 00-INDEX files are supposed to give a summary of all files present in a directory, but these files are horribly out of date and their usefulness is brought into question. Often a simple "ls" would reveal the same information as the filenames are generally quite descriptive as a short introduction to what the file covers (it should not surprise anyone what Documentation/sched/sched-design-CFS.txt covers) A few years back it was mentioned that these files were no longer really needed, and they have since then grown further out of date, so perhaps it is time to just throw them out. A short status yields the following _outdated_ 00-INDEX files, first counter is files listed in 00-INDEX but missing in the directory, last is files present but not listed in 00-INDEX. List of outdated 00-INDEX: Documentation: (4/10) Documentation/sysctl: (0/1) Documentation/timers: (1/0) Documentation/blockdev: (3/1) Documentation/w1/slaves: (0/1) Documentation/locking: (0/1) Documentation/devicetree: (0/5) Documentation/power: (1/1) Documentation/powerpc: (0/5) Documentation/arm: (1/0) Documentation/x86: (0/9) Documentation/x86/x86_64: (1/1) Documentation/scsi: (4/4) Documentation/filesystems: (2/9) Documentation/filesystems/nfs: (0/2) Documentation/cgroup-v1: (0/2) Documentation/kbuild: (0/4) Documentation/spi: (1/0) Documentation/virtual/kvm: (1/0) Documentation/scheduler: (0/2) Documentation/fb: (0/1) Documentation/block: (0/1) Documentation/networking: (6/37) Documentation/vm: (1/3) Then there are 364 subdirectories in Documentation/ with several files that are missing 00-INDEX alltogether (and another 120 with a single file and no 00-INDEX). I don't really have an opinion to whether or not we /should/ have 00-INDEX, but the above 00-INDEX should either be removed or be kept up to date. If we should keep the files, I can try to keep them updated, but I rather not if we just want to delete them anyway. As a starting point, remove all index-files and references to 00-INDEX and see where the discussion is going. Signed-off-by: Henrik Austad <henrik@austad.us> Acked-by: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Just-do-it-by: Steven Rostedt <rostedt@goodmis.org> Reviewed-by: Jens Axboe <axboe@kernel.dk> Acked-by: Paul Moore <paul@paul-moore.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: [Almost everybody else] Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2018-09-04stackleak: Allow runtime disabling of kernel stack erasingAlexander Popov
Introduce CONFIG_STACKLEAK_RUNTIME_DISABLE option, which provides 'stack_erasing' sysctl. It can be used in runtime to control kernel stack erasing for kernels built with CONFIG_GCC_PLUGIN_STACKLEAK. Suggested-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Alexander Popov <alex.popov@linux.com> Tested-by: Laura Abbott <labbott@redhat.com> Signed-off-by: Kees Cook <keescook@chromium.org>
2018-08-23namei: allow restricted O_CREAT of FIFOs and regular filesSalvatore Mesoraca
Disallows open of FIFOs or regular files not owned by the user in world writable sticky directories, unless the owner is the same as that of the directory or the file is opened without the O_CREAT flag. The purpose is to make data spoofing attacks harder. This protection can be turned on and off separately for FIFOs and regular files via sysctl, just like the symlinks/hardlinks protection. This patch is based on Openwall's "HARDEN_FIFO" feature by Solar Designer. This is a brief list of old vulnerabilities that could have been prevented by this feature, some of them even allow for privilege escalation: CVE-2000-1134 CVE-2007-3852 CVE-2008-0525 CVE-2009-0416 CVE-2011-4834 CVE-2015-1838 CVE-2015-7442 CVE-2016-7489 This list is not meant to be complete. It's difficult to track down all vulnerabilities of this kind because they were often reported without any mention of this particular attack vector. In fact, before hardlinks/symlinks restrictions, fifos/regular files weren't the favorite vehicle to exploit them. [s.mesoraca16@gmail.com: fix bug reported by Dan Carpenter] Link: https://lkml.kernel.org/r/20180426081456.GA7060@mwanda Link: http://lkml.kernel.org/r/1524829819-11275-1-git-send-email-s.mesoraca16@gmail.com [keescook@chromium.org: drop pr_warn_ratelimited() in favor of audit changes in the future] [keescook@chromium.org: adjust commit subjet] Link: http://lkml.kernel.org/r/20180416175918.GA13494@beast Signed-off-by: Salvatore Mesoraca <s.mesoraca16@gmail.com> Signed-off-by: Kees Cook <keescook@chromium.org> Suggested-by: Solar Designer <solar@openwall.com> Suggested-by: Kees Cook <keescook@chromium.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-22ipc: reorganize initialization of kern_ipc_perm.seqManfred Spraul
ipc_addid() initializes kern_ipc_perm.seq after having called idr_alloc() (within ipc_idr_alloc()). Thus a parallel semop() or msgrcv() that uses ipc_obtain_object_check() may see an uninitialized value. The patch moves the initialization of kern_ipc_perm.seq before the calls of idr_alloc(). Notes: 1) This patch has a user space visible side effect: If /proc/sys/kernel/*_next_id is used (i.e.: checkpoint/restore) and if semget()/msgget()/shmget() fails in the final step of adding the id to the rhash tree, then .._next_id is cleared. Before the patch, is remained unmodified. There is no change of the behavior after a successful ..get() call: It always clears .._next_id, there is no impact to non checkpoint/restore code as that code does not use .._next_id. 2) The patch correctly documents that after a call to ipc_idr_alloc(), the full tear-down sequence must be used. The callers of ipc_addid() do not fullfill that, i.e. more bugfixes are required. The patch is a squash of a patch from Dmitry and my own changes. Link: http://lkml.kernel.org/r/20180712185241.4017-3-manfred@colorfullife.com Reported-by: syzbot+2827ef6b3385deb07eaf@syzkaller.appspotmail.com Signed-off-by: Manfred Spraul <manfred@colorfullife.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Kees Cook <keescook@chromium.org> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Davidlohr Bueso <dbueso@suse.de> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Michal Hocko <mhocko@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-22kernel/hung_task.c: allow to set checking interval separately from timeoutDmitry Vyukov
Currently task hung checking interval is equal to timeout, as the result hung is detected anywhere between timeout and 2*timeout. This is fine for most interactive environments, but this hurts automated testing setups (syzbot). In an automated setup we need to strictly order CPU lockup < RCU stall < workqueue lockup < task hung < silent loss, so that RCU stall is not detected as task hung and task hung is not detected as silent machine loss. The large variance in task hung detection timeout requires setting silent machine loss timeout to a very large value (e.g. if task hung is 3 mins, then silent loss need to be set to ~7 mins). The additional 3 minutes significantly reduce testing efficiency because usually we crash kernel within a minute, and this can add hours to bug localization process as it needs to do dozens of tests. Allow setting checking interval separately from timeout. This allows to set timeout to, say, 3 minutes, but checking interval to 10 secs. The interval is controlled via a new hung_task_check_interval_secs sysctl, similar to the existing hung_task_timeout_secs sysctl. The default value of 0 results in the current behavior: checking interval is equal to timeout. [akpm@linux-foundation.org: update hung_task_timeout_max's comment] Link: http://lkml.kernel.org/r/20180611111004.203513-1-dvyukov@google.com Signed-off-by: Dmitry Vyukov <dvyukov@google.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-22Documentation/sysctl/vm.txt: update __vm_enough_memory()'s pathjuviliu
__vm_enough_memory has moved to mm/util.c. Link: http://lkml.kernel.org/r/E18EDF4A4FA4A04BBFA824B6D7699E532A7E5913@EXMBX-SZMAIL013.tencent.com Signed-off-by: Juvi Liu <juviliu@tencent.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-18Merge tag 'char-misc-4.19-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver updates from Greg KH: "Here is the bit set of char/misc drivers for 4.19-rc1 There is a lot here, much more than normal, seems like everyone is writing new driver subsystems these days... Anyway, major things here are: - new FSI driver subsystem, yet-another-powerpc low-level hardware bus - gnss, finally an in-kernel GPS subsystem to try to tame all of the crazy out-of-tree drivers that have been floating around for years, combined with some really hacky userspace implementations. This is only for GNSS receivers, but you have to start somewhere, and this is great to see. Other than that, there are new slimbus drivers, new coresight drivers, new fpga drivers, and loads of DT bindings for all of these and existing drivers. All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (255 commits) android: binder: Rate-limit debug and userspace triggered err msgs fsi: sbefifo: Bump max command length fsi: scom: Fix NULL dereference misc: mic: SCIF Fix scif_get_new_port() error handling misc: cxl: changed asterisk position genwqe: card_base: Use true and false for boolean values misc: eeprom: assignment outside the if statement uio: potential double frees if __uio_register_device() fails eeprom: idt_89hpesx: clean up an error pointer vs NULL inconsistency misc: ti-st: Fix memory leak in the error path of probe() android: binder: Show extra_buffers_size in trace firmware: vpd: Fix section enabled flag on vpd_section_destroy platform: goldfish: Retire pdev_bus goldfish: Use dedicated macros instead of manual bit shifting goldfish: Add missing includes to goldfish.h mux: adgs1408: new driver for Analog Devices ADGS1408/1409 mux dt-bindings: mux: add adi,adgs1408 Drivers: hv: vmbus: Cleanup synic memory free path Drivers: hv: vmbus: Remove use of slow_virt_to_phys() Drivers: hv: vmbus: Reset the channel callback in vmbus_onoffer_rescind() ...
2018-07-26Documentation: vm.txt: Adding 'nr_hugepages_mempolicy' parameter description.Prashant Dhamdhere
This patch adds 'nr_hugepages_mempolicy' parameter which is currently missing in 'vm.txt' file. It also contains a short description of 'nr_hugepages_mempolicy' parameter. Signed-off-by: Prashant Dhamdhere <pdhamdhe@redhat.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2018-07-08Drivers: HV: Send one page worth of kmsg dump over Hyper-V during panicSunil Muthuswamy
In the VM mode on Hyper-V, currently, when the kernel panics, an error code and few register values are populated in an MSR and the Hypervisor notified. This information is collected on the host. The amount of information currently collected is found to be limited and not very actionable. To gather more actionable data, such as stack trace, the proposal is to write one page worth of kmsg data on an allocated page and the Hypervisor notified of the page address through the MSR. - Sysctl option to control the behavior, with ON by default. Cc: K. Y. Srinivasan <kys@microsoft.com> Cc: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: Sunil Muthuswamy <sunilmut@microsoft.com> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-26doc: add description to dirtytime_expire_secondsYang Shi
commit 1efff914afac8a965ad63817ecf8861a927c2ace ("fs: add dirtytime_expire_seconds sysctl") introduced dirtytime_expire_seconds knob, but there is not description about it in Documentation/sysctl/vm.txt. Add the description for it. Cc: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Yang Shi <yang.shi@linux.alibaba.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2018-06-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds
Pull networking updates from David Miller: 1) Add Maglev hashing scheduler to IPVS, from Inju Song. 2) Lots of new TC subsystem tests from Roman Mashak. 3) Add TCP zero copy receive and fix delayed acks and autotuning with SO_RCVLOWAT, from Eric Dumazet. 4) Add XDP_REDIRECT support to mlx5 driver, from Jesper Dangaard Brouer. 5) Add ttl inherit support to vxlan, from Hangbin Liu. 6) Properly separate ipv6 routes into their logically independant components. fib6_info for the routing table, and fib6_nh for sets of nexthops, which thus can be shared. From David Ahern. 7) Add bpf_xdp_adjust_tail helper, which can be used to generate ICMP messages from XDP programs. From Nikita V. Shirokov. 8) Lots of long overdue cleanups to the r8169 driver, from Heiner Kallweit. 9) Add BTF ("BPF Type Format"), from Martin KaFai Lau. 10) Add traffic condition monitoring to iwlwifi, from Luca Coelho. 11) Plumb extack down into fib_rules, from Roopa Prabhu. 12) Add Flower classifier offload support to igb, from Vinicius Costa Gomes. 13) Add UDP GSO support, from Willem de Bruijn. 14) Add documentation for eBPF helpers, from Quentin Monnet. 15) Add TLS tx offload to mlx5, from Ilya Lesokhin. 16) Allow applications to be given the number of bytes available to read on a socket via a control message returned from recvmsg(), from Soheil Hassas Yeganeh. 17) Add x86_32 eBPF JIT compiler, from Wang YanQing. 18) Add AF_XDP sockets, with zerocopy support infrastructure as well. From Björn Töpel. 19) Remove indirect load support from all of the BPF JITs and handle these operations in the verifier by translating them into native BPF instead. From Daniel Borkmann. 20) Add GRO support to ipv6 gre tunnels, from Eran Ben Elisha. 21) Allow XDP programs to do lookups in the main kernel routing tables for forwarding. From David Ahern. 22) Allow drivers to store hardware state into an ELF section of kernel dump vmcore files, and use it in cxgb4. From Rahul Lakkireddy. 23) Various RACK and loss detection improvements in TCP, from Yuchung Cheng. 24) Add TCP SACK compression, from Eric Dumazet. 25) Add User Mode Helper support and basic bpfilter infrastructure, from Alexei Starovoitov. 26) Support ports and protocol values in RTM_GETROUTE, from Roopa Prabhu. 27) Support bulking in ->ndo_xdp_xmit() API, from Jesper Dangaard Brouer. 28) Add lots of forwarding selftests, from Petr Machata. 29) Add generic network device failover driver, from Sridhar Samudrala. * ra.kernel.org:/pub/scm/linux/kernel/git/davem/net-next: (1959 commits) strparser: Add __strp_unpause and use it in ktls. rxrpc: Fix terminal retransmission connection ID to include the channel net: hns3: Optimize PF CMDQ interrupt switching process net: hns3: Fix for VF mailbox receiving unknown message net: hns3: Fix for VF mailbox cannot receiving PF response bnx2x: use the right constant Revert "net: sched: cls: Fix offloading when ingress dev is vxlan" net: dsa: b53: Fix for brcm tag issue in Cygnus SoC enic: fix UDP rss bits netdev-FAQ: clarify DaveM's position for stable backports rtnetlink: validate attributes in do_setlink() mlxsw: Add extack messages for port_{un, }split failures netdevsim: Add extack error message for devlink reload devlink: Add extack to reload and port_{un, }split operations net: metrics: add proper netlink validation ipmr: fix error path when ipmr_new_table fails ip6mr: only set ip6mr_table from setsockopt when ip6mr_new_table succeeds net: hns3: remove unused hclgevf_cfg_func_mta_filter netfilter: provide udp*_lib_lookup for nf_tproxy qed*: Utilize FW 8.37.2.0 ...
2018-05-03bpf, x86_32: add eBPF JIT compiler for ia32Wang YanQing
The JIT compiler emits ia32 bit instructions. Currently, It supports eBPF only. Classic BPF is supported because of the conversion by BPF core. Almost all instructions from eBPF ISA supported except the following: BPF_ALU64 | BPF_DIV | BPF_K BPF_ALU64 | BPF_DIV | BPF_X BPF_ALU64 | BPF_MOD | BPF_K BPF_ALU64 | BPF_MOD | BPF_X BPF_STX | BPF_XADD | BPF_W BPF_STX | BPF_XADD | BPF_DW It doesn't support BPF_JMP|BPF_CALL with BPF_PSEUDO_CALL at the moment. IA32 has few general purpose registers, EAX|EDX|ECX|EBX|ESI|EDI. I use EAX|EDX|ECX|EBX as temporary registers to simulate instructions in eBPF ISA, and allocate ESI|EDI to BPF_REG_AX for constant blinding, all others eBPF registers, R0-R10, are simulated through scratch space on stack. The reasons behind the hardware registers allocation policy are: 1:MUL need EAX:EDX, shift operation need ECX, so they aren't fit for general eBPF 64bit register simulation. 2:We need at least 4 registers to simulate most eBPF ISA operations on registers operands instead of on register&memory operands. 3:We need to put BPF_REG_AX on hardware registers, or constant blinding will degrade jit performance heavily. Tested on PC (Intel(R) Core(TM) i5-5200U CPU). Testing results on i5-5200U: 1) test_bpf: Summary: 349 PASSED, 0 FAILED, [319/341 JIT'ed] 2) test_progs: Summary: 83 PASSED, 0 FAILED. 3) test_lpm: OK 4) test_lru_map: OK 5) test_verifier: Summary: 828 PASSED, 0 FAILED. Above tests are all done in following two conditions separately: 1:bpf_jit_enable=1 and bpf_jit_harden=0 2:bpf_jit_enable=1 and bpf_jit_harden=2 Below are some numbers for this jit implementation: Note: I run test_progs in kselftest 100 times continuously for every condition, the numbers are in format: total/times=avg. The numbers that test_bpf reports show almost the same relation. a:jit_enable=0 and jit_harden=0 b:jit_enable=1 and jit_harden=0 test_pkt_access:PASS:ipv4:15622/100=156 test_pkt_access:PASS:ipv4:10674/100=106 test_pkt_access:PASS:ipv6:9130/100=91 test_pkt_access:PASS:ipv6:4855/100=48 test_xdp:PASS:ipv4:240198/100=2401 test_xdp:PASS:ipv4:138912/100=1389 test_xdp:PASS:ipv6:137326/100=1373 test_xdp:PASS:ipv6:68542/100=685 test_l4lb:PASS:ipv4:61100/100=611 test_l4lb:PASS:ipv4:37302/100=373 test_l4lb:PASS:ipv6:101000/100=1010 test_l4lb:PASS:ipv6:55030/100=550 c:jit_enable=1 and jit_harden=2 test_pkt_access:PASS:ipv4:10558/100=105 test_pkt_access:PASS:ipv6:5092/100=50 test_xdp:PASS:ipv4:131902/100=1319 test_xdp:PASS:ipv6:77932/100=779 test_l4lb:PASS:ipv4:38924/100=389 test_l4lb:PASS:ipv6:57520/100=575 The numbers show we get 30%~50% improvement. See Documentation/networking/filter.txt for more information. Changelog: Changes v5-v6: 1:Add do {} while (0) to RETPOLINE_RAX_BPF_JIT for consistence reason. 2:Clean up non-standard comments, reported by Daniel Borkmann. 3:Fix a memory leak issue, repoted by Daniel Borkmann. Changes v4-v5: 1:Delete is_on_stack, BPF_REG_AX is the only one on real hardware registers, so just check with it. 2:Apply commit 1612a981b766 ("bpf, x64: fix JIT emission for dead code"), suggested by Daniel Borkmann. Changes v3-v4: 1:Fix changelog in commit. I install llvm-6.0, then test_progs willn't report errors. I submit another patch: "bpf: fix misaligned access for BPF_PROG_TYPE_PERF_EVENT program type on x86_32 platform" to fix another problem, after that patch, test_verifier willn't report errors too. 2:Fix clear r0[1] twice unnecessarily in *BPF_IND|BPF_ABS* simulation. Changes v2-v3: 1:Move BPF_REG_AX to real hardware registers for performance reason. 3:Using bpf_load_pointer instead of bpf_jit32.S, suggested by Daniel Borkmann. 4:Delete partial codes in 1c2a088a6626, suggested by Daniel Borkmann. 5:Some bug fixes and comments improvement. Changes v1-v2: 1:Fix bug in emit_ia32_neg64. 2:Fix bug in emit_ia32_arsh_r64. 3:Delete filename in top level comment, suggested by Thomas Gleixner. 4:Delete unnecessary boiler plate text, suggested by Thomas Gleixner. 5:Rewrite some words in changelog. 6:CodingSytle improvement and a little more comments. Signed-off-by: Wang YanQing <udknight@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-04-27docs/admin-guide/mm: start moving here files from Documentation/vmMike Rapoport
Several documents in Documentation/vm fit quite well into the "admin/user guide" category. The documents that don't overload the reader with lots of implementation details and provide coherent description of certain feature can be moved to Documentation/admin-guide/mm. Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2018-04-16Merge branch 'mm-rst' into docs-nextJonathan Corbet
Mike Rapoport says: These patches convert files in Documentation/vm to ReST format, add an initial index and link it to the top level documentation. There are no contents changes in the documentation, except few spelling fixes. The relatively large diffstat stems from the indentation and paragraph wrapping changes. I've tried to keep the formatting as consistent as possible, but I could miss some places that needed markup and add some markup where it was not necessary. [jc: significant conflicts in vm/hmm.rst]
2018-04-16docs/vm: rename documentation files to .rstMike Rapoport
Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2018-04-11taint: add taint for randstructKees Cook
Since the randstruct plugin can intentionally produce extremely unusual kernel structure layouts (even performance pathological ones), some maintainers want to be able to trivially determine if an Oops is coming from a randstruct-built kernel, so as to keep their sanity when debugging. This adds the new flag and initializes taint_mask immediately when built with randstruct. Link: http://lkml.kernel.org/r/1519084390-43867-4-git-send-email-keescook@chromium.org Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-04-11taint: consolidate documentationKees Cook
This consolidates the taint bit documentation into a single place with both numeric and letter values. Additionally adds the missing TAINT_AUX documentation. Link: http://lkml.kernel.org/r/1519084390-43867-3-git-send-email-keescook@chromium.org Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-04-11mm/page_alloc: don't reserve ZONE_HIGHMEM for ZONE_MOVABLE requestJoonsoo Kim
Freepage on ZONE_HIGHMEM doesn't work for kernel memory so it's not that important to reserve. When ZONE_MOVABLE is used, this problem would theorectically cause to decrease usable memory for GFP_HIGHUSER_MOVABLE allocation request which is mainly used for page cache and anon page allocation. So, fix it by setting 0 to sysctl_lowmem_reserve_ratio[ZONE_HIGHMEM]. And, defining sysctl_lowmem_reserve_ratio array by MAX_NR_ZONES - 1 size makes code complex. For example, if there is highmem system, following reserve ratio is activated for *NORMAL ZONE* which would be easyily misleading people. #ifdef CONFIG_HIGHMEM 32 #endif This patch also fixes this situation by defining sysctl_lowmem_reserve_ratio array by MAX_NR_ZONES and place "#ifdef" to right place. Link: http://lkml.kernel.org/r/1504672525-17915-1-git-send-email-iamjoonsoo.kim@lge.com Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Tested-by: Tony Lindgren <tony@atomide.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: "Aneesh Kumar K . V" <aneesh.kumar@linux.vnet.ibm.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@redhat.com> Cc: Laura Abbott <lauraa@codeaurora.org> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Will Deacon <will.deacon@arm.com> Cc: <linux-api@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-03-09net: do not create fallback tunnels for non-default namespacesEric Dumazet
fallback tunnels (like tunl0, gre0, gretap0, erspan0, sit0, ip6tnl0, ip6gre0) are automatically created when the corresponding module is loaded. These tunnels are also automatically created when a new network namespace is created, at a great cost. In many cases, netns are used for isolation purposes, and these extra network devices are a waste of resources. We are using thousands of netns per host, and hit the netns creation/delete bottleneck a lot. (Many thanks to Kirill for recent work on this) Add a new sysctl so that we can opt-out from this automatic creation. Note that these tunnels are still created for the initial namespace, to be the least intrusive for typical setups. Tested: lpk43:~# cat add_del_unshare.sh for i in `seq 1 40` do (for j in `seq 1 100` ; do unshare -n /bin/true >/dev/null ; done) & done wait lpk43:~# echo 0 >/proc/sys/net/core/fb_tunnels_only_for_init_net lpk43:~# time ./add_del_unshare.sh real 0m37.521s user 0m0.886s sys 7m7.084s lpk43:~# echo 1 >/proc/sys/net/core/fb_tunnels_only_for_init_net lpk43:~# time ./add_del_unshare.sh real 0m4.761s user 0m0.851s sys 1m8.343s lpk43:~# Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-06Documentation/sysctl/user.txt: fix typoKangmin Park
Fix 'documetation' to 'documentation' Link: http://lkml.kernel.org/r/CAKW4uUxRPZz59aWAX8ytaCB5=Qh6d_CvAnO7rYq-6NRAnQJbDA@mail.gmail.com Signed-off-by: Kangmin Park <l4stpr0gr4m@gmail.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Jiri Kosina <trivial@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-01-31Merge tag 'docs-4.16' of git://git.lwn.net/linuxLinus Torvalds
Pull documentation updates from Jonathan Corbet: "Documentation updates for 4.16. New stuff includes refcount_t documentation, errseq documentation, kernel-doc support for nested structure definitions, the removal of lots of crufty kernel-doc support for unused formats, SPDX tag documentation, the beginnings of a manual for subsystem maintainers, and lots of fixes and updates. As usual, some of the changesets reach outside of Documentation/ to effect kerneldoc comment fixes. It also adds the new LICENSES directory, of which Thomas promises I do not need to be the maintainer" * tag 'docs-4.16' of git://git.lwn.net/linux: (65 commits) linux-next: docs-rst: Fix typos in kfigure.py linux-next: DOC: HWPOISON: Fix path to debugfs in hwpoison.txt Documentation: Fix misconversion of #if docs: add index entry for networking/msg_zerocopy Documentation: security/credentials.rst: explain need to sort group_list LICENSES: Add MPL-1.1 license LICENSES: Add the GPL 1.0 license LICENSES: Add Linux syscall note exception LICENSES: Add the MIT license LICENSES: Add the BSD-3-clause "Clear" license LICENSES: Add the BSD 3-clause "New" or "Revised" License LICENSES: Add the BSD 2-clause "Simplified" license LICENSES: Add the LGPL-2.1 license LICENSES: Add the LGPL 2.0 license LICENSES: Add the GPL 2.0 license Documentation: Add license-rules.rst to describe how to properly identify file licenses scripts: kernel_doc: better handle show warnings logic fs/*/Kconfig: drop links to 404-compliant http://acl.bestbits.at doc: md: Fix a file name to md-fault.c in fault-injection.txt errseq: Add to documentation tree ...
2018-01-31Merge branch 'akpm' (patches from Andrew)Linus Torvalds
Merge updates from Andrew Morton: - misc fixes - ocfs2 updates - most of MM * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (118 commits) mm: remove PG_highmem description tools, vm: new option to specify kpageflags file mm/swap.c: make functions and their kernel-doc agree mm, memory_hotplug: fix memmap initialization mm: correct comments regarding do_fault_around() mm: numa: do not trap faults on shared data section pages. hugetlb, mbind: fall back to default policy if vma is NULL hugetlb, mempolicy: fix the mbind hugetlb migration mm, hugetlb: further simplify hugetlb allocation API mm, hugetlb: get rid of surplus page accounting tricks mm, hugetlb: do not rely on overcommit limit during migration mm, hugetlb: integrate giga hugetlb more naturally to the allocation path mm, hugetlb: unify core page allocation accounting and initialization mm/memcontrol.c: try harder to decrease [memory,memsw].limit_in_bytes mm/memcontrol.c: make local symbol static mm/hmm: fix uninitialized use of 'entry' in hmm_vma_walk_pmd() include/linux/mmzone.h: fix explanation of lower bits in the SPARSEMEM mem_map pointer mm/compaction.c: fix comment for try_to_compact_pages() mm/page_ext.c: make page_ext_init a noop when CONFIG_PAGE_EXTENSION but nothing uses it zsmalloc: use U suffix for negative literals being shifted ...
2018-01-31mm, hugetlb: remove hugepages_treat_as_movable sysctlMichal Hocko
hugepages_treat_as_movable has been introduced by 396faf0303d2 ("Allow huge page allocations to use GFP_HIGH_MOVABLE") to allow hugetlb allocations from ZONE_MOVABLE even when hugetlb pages were not migrateable. The purpose of the movable zone was different at the time. It aimed at reducing memory fragmentation and hugetlb pages being long lived and large werre not contributing to the fragmentation so it was acceptable to use the zone back then. Things have changed though and the primary purpose of the zone became migratability guarantee. If we allow non migrateable hugetlb pages to be in ZONE_MOVABLE memory hotplug might fail to offline the memory. Remove the knob and only rely on hugepage_migration_supported to allow movable zones. Mel said: : Primarily it was aimed at allowing the hugetlb pool to safely shrink with : the ability to grow it again. The use case was for batched jobs, some of : which needed huge pages and others that did not but didn't want the memory : useless pinned in the huge pages pool. : : I suspect that more users rely on THP than hugetlbfs for flexible use of : huge pages with fallback options so I think that removing the option : should be ok. Link: http://lkml.kernel.org/r/20171003072619.8654-1-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Reported-by: Alexandru Moise <00moses.alexander00@gmail.com> Acked-by: Mel Gorman <mgorman@suse.de> Cc: Alexandru Moise <00moses.alexander00@gmail.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-12-21doc: update kptr_restrict documentationTobin C. Harding
Recently the behaviour of printk specifier %pK was changed. The documentation does not currently mirror this. Update documentation for sysctl kptr_restrict. Signed-off-by: Tobin C. Harding <me@tobin.cc> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2017-12-20net: Clarify dev_weight documentation for LRO and GRO_HW.Michael Chan
Reported-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-11Documentation: Better document the hardlockup_panic sysctlScott Wood
Commit ac1f591249d95372f ("kernel/watchdog.c: add sysctl knob hardlockup_panic") added the hardlockup_panic sysctl, but did not add it to Documentation/sysctl/kernel.txt. Add this, and reference it from the corresponding entry in Documentation/admin-guide/kernel-parameters.txt. Signed-off-by: Scott Wood <swood@redhat.com> Acked-by: Christoph von Recklinghausen <crecklin@redhat.com> Acked-by: Don Zickus <dzickus@redhat.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2017-11-29Revert "mm/page-writeback.c: print a warning if the vm dirtiness settings ↵Michal Hocko
are illogical" This reverts commit 0f6d24f87856 ("mm/page-writeback.c: print a warning if the vm dirtiness settings are illogical") because it causes false positive warnings during OOM situations as noticed by Tetsuo Handa: Node 0 active_anon:3525940kB inactive_anon:8372kB active_file:216kB inactive_file:1872kB unevictable:0kB isolated(anon):0kB isolated(file):0kB mapped:2504kB dirty:52kB writeback:0kB shmem:8660kB shmem_thp: 0kB shmem_pmdmapped: 0kB anon_thp: 636928kB writeback_tmp:0kB unstable:0kB all_unreclaimable? yes Node 0 DMA free:14848kB min:284kB low:352kB high:420kB active_anon:992kB inactive_anon:0kB active_file:0kB inactive_file:0kB unevictable:0kB writepending:0kB present:15988kB managed:15904kB mlocked:0kB kernel_stack:0kB pagetables:24kB bounce:0kB free_pcp:0kB local_pcp:0kB free_cma:0kB lowmem_reserve[]: 0 2687 3645 3645 Node 0 DMA32 free:53004kB min:49608kB low:62008kB high:74408kB active_anon:2712648kB inactive_anon:0kB active_file:0kB inactive_file:0kB unevictable:0kB writepending:0kB present:3129216kB managed:2773132kB mlocked:0kB kernel_stack:96kB pagetables:5096kB bounce:0kB free_pcp:0kB local_pcp:0kB free_cma:0kB lowmem_reserve[]: 0 0 958 958 Node 0 Normal free:17140kB min:17684kB low:22104kB high:26524kB active_anon:812300kB inactive_anon:8372kB active_file:1228kB inactive_file:1868kB unevictable:0kB writepending:52kB present:1048576kB managed:981224kB mlocked:0kB kernel_stack:3520kB pagetables:8552kB bounce:0kB free_pcp:120kB local_pcp:120kB free_cma:0kB lowmem_reserve[]: 0 0 0 0 [...] Out of memory: Kill process 8459 (a.out) score 999 or sacrifice child Killed process 8459 (a.out) total-vm:4180kB, anon-rss:88kB, file-rss:0kB, shmem-rss:0kB oom_reaper: reaped process 8459 (a.out), now anon-rss:0kB, file-rss:0kB, shmem-rss:0kB vm direct limit must be set greater than background limit. The problem is that both thresh and bg_thresh will be 0 if available_memory is less than 4 pages when evaluating global_dirtyable_memory. While this might be worked around the whole point of the warning is dubious at best. We do rely on admins to do sensible things when changing tunable knobs. Dirty memory writeback knobs are not any special in that regards so revert the warning rather than adding more hacks to work this around. Debugged by Yafang Shao. Link: http://lkml.kernel.org/r/20171127091939.tahb77nznytcxw55@dhcp22.suse.cz Fixes: 0f6d24f87856 ("mm/page-writeback.c: print a warning if the vm dirtiness settings are illogical") Signed-off-by: Michal Hocko <mhocko@suse.com> Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Yafang Shao <laoar.shao@gmail.com> Cc: Jan Kara <jack@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-17Documentation/sysctl/vm.txt: fix typoKangmin Park
Link: http://lkml.kernel.org/r/CAKW4uUyCi=PnKf3epgFVz8z=1tMtHSOHNm+fdNxrNw3-THvRCA@mail.gmail.com Signed-off-by: Kangmin Park <l4stpr0gr4m@gmail.com> Cc: Jiri Kosina <trivial@kernel.org> Cc: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-15mm, sysctl: make NUMA stats configurableKemi Wang
This is the second step which introduces a tunable interface that allow numa stats configurable for optimizing zone_statistics(), as suggested by Dave Hansen and Ying Huang. ========================================================================= When page allocation performance becomes a bottleneck and you can tolerate some possible tool breakage and decreased numa counter precision, you can do: echo 0 > /proc/sys/vm/numa_stat In this case, numa counter update is ignored. We can see about *4.8%*(185->176) drop of cpu cycles per single page allocation and reclaim on Jesper's page_bench01 (single thread) and *8.1%*(343->315) drop of cpu cycles per single page allocation and reclaim on Jesper's page_bench03 (88 threads) running on a 2-Socket Broadwell-based server (88 threads, 126G memory). Benchmark link provided by Jesper D Brouer (increase loop times to 10000000): https://github.com/netoptimizer/prototype-kernel/tree/master/kernel/mm/bench ========================================================================= When page allocation performance is not a bottleneck and you want all tooling to work, you can do: echo 1 > /proc/sys/vm/numa_stat This is system default setting. Many thanks to Michal Hocko, Dave Hansen, Ying Huang and Vlastimil Babka for comments to help improve the original patch. [keescook@chromium.org: make sure mutex is a global static] Link: http://lkml.kernel.org/r/20171107213809.GA4314@beast Link: http://lkml.kernel.org/r/1508290927-8518-1-git-send-email-kemi.wang@intel.com Signed-off-by: Kemi Wang <kemi.wang@intel.com> Signed-off-by: Kees Cook <keescook@chromium.org> Reported-by: Jesper Dangaard Brouer <brouer@redhat.com> Suggested-by: Dave Hansen <dave.hansen@intel.com> Suggested-by: Ying Huang <ying.huang@intel.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Michal Hocko <mhocko@suse.com> Cc: "Luis R . Rodriguez" <mcgrof@kernel.org> Cc: Kees Cook <keescook@chromium.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Christopher Lameter <cl@linux.com> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Tim Chen <tim.c.chen@intel.com> Cc: Andi Kleen <andi.kleen@intel.com> Cc: Aaron Lu <aaron.lu@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-15mm: consolidate page table accountingKirill A. Shutemov
Currently, we account page tables separately for each page table level, but that's redundant -- we only make use of total memory allocated to page tables for oom_badness calculation. We also provide the information to userspace, but it has dubious value there too. This patch switches page table accounting to single counter. mm->pgtables_bytes is now used to account all page table levels. We use bytes, because page table size for different levels of page table tree may be different. The change has user-visible effect: we don't have VmPMD and VmPUD reported in /proc/[pid]/status. Not sure if anybody uses them. (As alternative, we can always report 0 kB for them.) OOM-killer report is also slightly changed: we now report pgtables_bytes instead of nr_ptes, nr_pmd, nr_puds. Apart from reducing number of counters per-mm, the benefit is that we now calculate oom_badness() more correctly for machines which have different size of page tables depending on level or where page tables are less than a page in size. The only downside can be debuggability because we do not know which page table level could leak. But I do not remember many bugs that would be caught by separate counters so I wouldn't lose sleep over this. [akpm@linux-foundation.org: fix mm/huge_memory.c] Link: http://lkml.kernel.org/r/20171006100651.44742-2-kirill.shutemov@linux.intel.com Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> [kirill.shutemov@linux.intel.com: fix build] Link: http://lkml.kernel.org/r/20171016150113.ikfxy3e7zzfvsr4w@black.fi.intel.com Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-15mm: account pud page tablesKirill A. Shutemov
On a machine with 5-level paging support a process can allocate significant amount of memory and stay unnoticed by oom-killer and memory cgroup. The trick is to allocate a lot of PUD page tables. We don't account PUD page tables, only PMD and PTE. We already addressed the same issue for PMD page tables, see commit dc6c9a35b66b ("mm: account pmd page tables to the process"). Introduction of 5-level paging brings the same issue for PUD page tables. The patch expands accounting to PUD level. [kirill.shutemov@linux.intel.com: s/pmd_t/pud_t/] Link: http://lkml.kernel.org/r/20171004074305.x35eh5u7ybbt5kar@black.fi.intel.com [heiko.carstens@de.ibm.com: s390/mm: fix pud table accounting] Link: http://lkml.kernel.org/r/20171103090551.18231-1-heiko.carstens@de.ibm.com Link: http://lkml.kernel.org/r/20171002080427.3320-1-kirill.shutemov@linux.intel.com Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Acked-by: Rik van Riel <riel@redhat.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-15mm/page-writeback.c: print a warning if the vm dirtiness settings are illogicalYafang Shao
The vm direct limit setting must be set greater than vm background limit setting. Otherwise print a warning to help the operator to figure out that the vm dirtiness settings is in illogical state. Link: http://lkml.kernel.org/r/1506592464-30962-1-git-send-email-laoar.shao@gmail.com Signed-off-by: Yafang Shao <laoar.shao@gmail.com> Cc: Jan Kara <jack@suse.cz> Cc: Michal Hocko <mhocko@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-10-03docs: Update binfmt_misc linksTom Saeger
Documentation/binfmt_misc.txt moved to Documentation/admin-guide/binfmt-misc.rst Signed-off-by: Tom Saeger <tom.saeger@oracle.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2017-09-22Merge tag 'seccomp-v4.14-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull seccomp updates from Kees Cook: "Major additions: - sysctl and seccomp operation to discover available actions (tyhicks) - new per-filter configurable logging infrastructure and sysctl (tyhicks) - SECCOMP_RET_LOG to log allowed syscalls (tyhicks) - SECCOMP_RET_KILL_PROCESS as the new strictest possible action - self-tests for new behaviors" [ This is the seccomp part of the security pull request during the merge window that was nixed due to unrelated problems - Linus ] * tag 'seccomp-v4.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: samples: Unrename SECCOMP_RET_KILL selftests/seccomp: Test thread vs process killing seccomp: Implement SECCOMP_RET_KILL_PROCESS action seccomp: Introduce SECCOMP_RET_KILL_PROCESS seccomp: Rename SECCOMP_RET_KILL to SECCOMP_RET_KILL_THREAD seccomp: Action to log before allowing seccomp: Filter flag to log all actions except SECCOMP_RET_ALLOW seccomp: Selftest for detection of filter flag support seccomp: Sysctl to configure actions that are allowed to be logged seccomp: Operation for checking if an action is available seccomp: Sysctl to display available actions seccomp: Provide matching filter for introspection selftests/seccomp: Refactor RET_ERRNO tests selftests/seccomp: Add simple seccomp overhead benchmark selftests/seccomp: Add tests for basic ptrace actions
2017-09-06Merge branch 'akpm' (patches from Andrew)Linus Torvalds
Merge updates from Andrew Morton: - various misc bits - DAX updates - OCFS2 - most of MM * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (119 commits) mm,fork: introduce MADV_WIPEONFORK x86,mpx: make mpx depend on x86-64 to free up VMA flag mm: add /proc/pid/smaps_rollup mm: hugetlb: clear target sub-page last when clearing huge page mm: oom: let oom_reap_task and exit_mmap run concurrently swap: choose swap device according to numa node mm: replace TIF_MEMDIE checks by tsk_is_oom_victim mm, oom: do not rely on TIF_MEMDIE for memory reserves access z3fold: use per-cpu unbuddied lists mm, swap: don't use VMA based swap readahead if HDD is used as swap mm, swap: add sysfs interface for VMA based swap readahead mm, swap: VMA based swap readahead mm, swap: fix swap readahead marking mm, swap: add swap readahead hit statistics mm/vmalloc.c: don't reinvent the wheel but use existing llist API mm/vmstat.c: fix wrong comment selftests/memfd: add memfd_create hugetlbfs selftest mm/shmem: add hugetlbfs support to memfd_create() mm, devm_memremap_pages: use multi-order radix for ZONE_DEVICE lookups mm/vmalloc.c: halve the number of comparisons performed in pcpu_get_vm_areas() ...
2017-09-06mm, page_alloc: rip out ZONELIST_ORDER_ZONEMichal Hocko
Patch series "cleanup zonelists initialization", v1. This is aimed at cleaning up the zonelists initialization code we have but the primary motivation was bug report [2] which got resolved but the usage of stop_machine is just too ugly to live. Most patches are straightforward but 3 of them need a special consideration. Patch 1 removes zone ordered zonelists completely. I am CCing linux-api because this is a user visible change. As I argue in the patch description I do not think we have a strong usecase for it these days. I have kept sysctl in place and warn into the log if somebody tries to configure zone lists ordering. If somebody has a real usecase for it we can revert this patch but I do not expect anybody will actually notice runtime differences. This patch is not strictly needed for the rest but it made patch 6 easier to implement. Patch 7 removes stop_machine from build_all_zonelists without adding any special synchronization between iterators and updater which I _believe_ is acceptable as explained in the changelog. I hope I am not missing anything. Patch 8 then removes zonelists_mutex which is kind of ugly as well and not really needed AFAICS but a care should be taken when double checking my thinking. This patch (of 9): Supporting zone ordered zonelists costs us just a lot of code while the usefulness is arguable if existent at all. Mel has already made node ordering default on 64b systems. 32b systems are still using ZONELIST_ORDER_ZONE because it is considered better to fallback to a different NUMA node rather than consume precious lowmem zones. This argument is, however, weaken by the fact that the memory reclaim has been reworked to be node rather than zone oriented. This means that lowmem requests have to skip over all highmem pages on LRUs already and so zone ordering doesn't save the reclaim time much. So the only advantage of the zone ordering is under a light memory pressure when highmem requests do not ever hit into lowmem zones and the lowmem pressure doesn't need to reclaim. Considering that 32b NUMA systems are rather suboptimal already and it is generally advisable to use 64b kernel on such a HW I believe we should rather care about the code maintainability and just get rid of ZONELIST_ORDER_ZONE altogether. Keep systcl in place and warn if somebody tries to set zone ordering either from kernel command line or the sysctl. [mhocko@suse.com: reading vm.numa_zonelist_order will never terminate] Link: http://lkml.kernel.org/r/20170721143915.14161-2-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Acked-by: Mel Gorman <mgorman@suse.de> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Joonsoo Kim <js1304@gmail.com> Cc: Shaohua Li <shaohua.li@intel.com> Cc: Toshi Kani <toshi.kani@hpe.com> Cc: Abdul Haleem <abdhalee@linux.vnet.ibm.com> Cc: <linux-api@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds
Pull networking updates from David Miller: 1) Support ipv6 checksum offload in sunvnet driver, from Shannon Nelson. 2) Move to RB-tree instead of custom AVL code in inetpeer, from Eric Dumazet. 3) Allow generic XDP to work on virtual devices, from John Fastabend. 4) Add bpf device maps and XDP_REDIRECT, which can be used to build arbitrary switching frameworks using XDP. From John Fastabend. 5) Remove UFO offloads from the tree, gave us little other than bugs. 6) Remove the IPSEC flow cache, from Florian Westphal. 7) Support ipv6 route offload in mlxsw driver. 8) Support VF representors in bnxt_en, from Sathya Perla. 9) Add support for forward error correction modes to ethtool, from Vidya Sagar Ravipati. 10) Add time filter for packet scheduler action dumping, from Jamal Hadi Salim. 11) Extend the zerocopy sendmsg() used by virtio and tap to regular sockets via MSG_ZEROCOPY. From Willem de Bruijn. 12) Significantly rework value tracking in the BPF verifier, from Edward Cree. 13) Add new jump instructions to eBPF, from Daniel Borkmann. 14) Rework rtnetlink plumbing so that operations can be run without taking the RTNL semaphore. From Florian Westphal. 15) Support XDP in tap driver, from Jason Wang. 16) Add 32-bit eBPF JIT for ARM, from Shubham Bansal. 17) Add Huawei hinic ethernet driver. 18) Allow to report MD5 keys in TCP inet_diag dumps, from Ivan Delalande. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1780 commits) i40e: point wb_desc at the nvm_wb_desc during i40e_read_nvm_aq i40e: avoid NVM acquire deadlock during NVM update drivers: net: xgene: Remove return statement from void function drivers: net: xgene: Configure tx/rx delay for ACPI drivers: net: xgene: Read tx/rx delay for ACPI rocker: fix kcalloc parameter order rds: Fix non-atomic operation on shared flag variable net: sched: don't use GFP_KERNEL under spin lock vhost_net: correctly check tx avail during rx busy polling net: mdio-mux: add mdio_mux parameter to mdio_mux_init() rxrpc: Make service connection lookup always check for retry net: stmmac: Delete dead code for MDIO registration gianfar: Fix Tx flow control deactivation cxgb4: Ignore MPS_TX_INT_CAUSE[Bubble] for T6 cxgb4: Fix pause frame count in t4_get_port_stats cxgb4: fix memory leak tun: rename generic_xdp to skb_xdp tun: reserve extra headroom only when XDP is set net: dsa: bcm_sf2: Configure IMP port TC2QOS mapping net: dsa: bcm_sf2: Advertise number of egress queues ...
2017-08-24Merge tag 'perf-core-for-mingo-4.14-20170823' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo: - Expression parser enhancements for metrics (Andi Kleen) - Fix buffer overflow while freeing events in 'perf stat' (Andi Kleen) - Fix static linking with elfutils's libdf and with libunwind in Debian/Ubuntu (Konstantin Khlebnikov) - Tighten detection of BPF events, avoiding matching some other PMU events such as 'cpu/uops_executed.core,cmask=1/' as a .c source file that ended up being considered a BPF event (Andi Kleen) - Add Skylake server uncore JSON vendor events (Andi Kleen) - Add support for printing new mem_info encodings, including 'perf test' checks (Andi Kleen) - Really install manpages via 'make install-man' (Konstantin Khlebnikov) - Fix documentation for perf_event_paranoid and perf_event_mlock_kb sysctls (Konstantin Khlebnikov) Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-08-23bpf, doc: Add arm32 as arch supporting eBPF JITShubham Bansal
As eBPF JIT support for arm32 was added recently with commit 39c13c204bb1150d401e27d41a9d8b332be47c49, it seems appropriate to add arm32 as arch with support for eBPF JIT in bpf and sysctl docs as well. Signed-off-by: Shubham Bansal <illusionist.neo@gmail.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-22perf: Fix documentation for sysctls perf_event_paranoid and perf_event_mlock_kbKonstantin Khlebnikov
Fix misprint CAP_IOC_LOCK -> CAP_IPC_LOCK. This capability have nothing to do with raw tracepoints. This part is about bypassing mlock limits. Sysctl kernel.perf_event_paranoid = -1 allows raw and ftrace function tracepoints without CAP_SYS_ADMIN. Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/150322916080.129746.11285255474738558340.stgit@buzz Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-08-20bpf, doc: also add s390x as arch to sysctl descriptionDaniel Borkmann
Looks like this was accidentally missed, so still add s390x as supported eBPF JIT arch to bpf_jit_enable. Fixes: 014cd0a368dc ("bpf: Update sysctl documentation to list all supported architectures") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-18bpf, doc: improve sysctl knob descriptionDaniel Borkmann
Current context speaking of tcpdump filters is out of date these days, so lets improve the sysctl description for the BPF knobs a bit. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-17bpf: Update sysctl documentation to list all supported architecturesMichael Ellerman
The sysctl documentation states that the JIT is only available on x86_64, which is no longer correct. Update the list, and break it out to indicate which architectures support the cBPF JIT (via HAVE_CBPF_JIT) or the eBPF JIT (HAVE_EBPF_JIT). Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-14seccomp: Sysctl to display available actionsTyler Hicks
This patch creates a read-only sysctl containing an ordered list of seccomp actions that the kernel supports. The ordering, from left to right, is the lowest action value (kill) to the highest action value (allow). Currently, a read of the sysctl file would return "kill trap errno trace allow". The contents of this sysctl file can be useful for userspace code as well as the system administrator. The path to the sysctl is: /proc/sys/kernel/seccomp/actions_avail libseccomp and other userspace code can easily determine which actions the current kernel supports. The set of actions supported by the current kernel may be different than the set of action macros found in kernel headers that were installed where the userspace code was built. In addition, this sysctl will allow system administrators to know which actions are supported by the kernel and make it easier to configure exactly what seccomp logs through the audit subsystem. Support for this level of logging configuration will come in a future patch. Signed-off-by: Tyler Hicks <tyhicks@canonical.com> Signed-off-by: Kees Cook <keescook@chromium.org>
2017-07-10mm: document highmem_is_dirtyable sysctlMichal Hocko
It seems that there are still people using 32b kernels which a lot of memory and the IO tend to suck a lot for them by default. Mostly because writers are throttled too when the lowmem is used. We have highmem_is_dirtyable to work around that issue but it seems we never bothered to document it. Let's do it now, finally. Link: http://lkml.kernel.org/r/20170626093200.18958-1-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Alkis Georgopoulos <alkisg@gmail.com> Cc: Mel Gorman <mgorman@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-04-21Replace 2 jiffies with sysctl netdev_budget_usecs to enable softirq tuningMatthew Whitehead
Constants used for tuning are generally a bad idea, especially as hardware changes over time. Replace the constant 2 jiffies with sysctl variable netdev_budget_usecs to enable sysadmins to tune the softirq processing. Also document the variable. For example, a very fast machine might tune this to 1000 microseconds, while my regression testing 486DX-25 needs it to be 4000 microseconds on a nearly idle network to prevent time_squeeze from being incremented. Version 2: changed jiffies to microseconds for predictable units. Signed-off-by: Matthew Whitehead <tedheadster@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>