summaryrefslogtreecommitdiff
path: root/Documentation/usb
AgeCommit message (Collapse)Author
2017-05-04Merge tag 'usb-4.12-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB updates from Greg KH: "Here is the big USB patchset for 4.12-rc1. Lots of good stuff here, after many many many attempts, the kernel finally has a working typeC interface, many thanks to Heikki and Guenter and others who have taken the time to get this merged. It wasn't an easy path for them at all. There's also a staging driver that uses this new api, which is why it's coming in through this tree. Along with that, there's the usual huge number of changes for gadget drivers, xhci, and other stuff. Johan also finally refactored pretty much every driver that was looking at USB endpoints to do it in a common way, which will help prevent any "badly-formed" devices from causing problems in drivers. That too wasn't a simple task. All of these have been in linux-next for a while with no reported issues" * tag 'usb-4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (263 commits) staging: typec: Fairchild FUSB302 Type-c chip driver staging: typec: Type-C Port Controller Interface driver (tcpci) staging: typec: USB Type-C Port Manager (tcpm) usb: host: xhci: remove #ifdef around PM functions usb: musb: don't mark of_dev_auxdata as initdata usb: misc: legousbtower: Fix buffers on stack USB: Revert "cdc-wdm: fix "out-of-sync" due to missing notifications" usb: Make sure usb/phy/of gets built-in USB: storage: e-mail update in drivers/usb/storage/unusual_devs.h usb: host: xhci: print correct command ring address usb: host: xhci: delete sp_dma_buffers for scratchpad usb: host: xhci: using correct specification chapter reference for DCBAAP xhci: switch to pci_alloc_irq_vectors usb: host: xhci-plat: set resume_quirk() for R-Car controllers usb: host: xhci-plat: add resume_quirk() usb: host: xhci-plat: enable clk in resume timing usb: host: plat: Enable xHCI plat runtime PM USB: serial: ftdi_sio: add device ID for Microsemi/Arrow SF2PLUS Dev Kit USB: serial: constify static arrays usb: fix some references for /proc/bus/usb ...
2017-05-02Merge tag 'docs-4.12' of git://git.lwn.net/linuxLinus Torvalds
Pull documentation update from Jonathan Corbet: "A reasonably busy cycle for documentation this time around. There is a new guide for user-space API documents, rather sparsely populated at the moment, but it's a start. Markus improved the infrastructure for converting diagrams. Mauro has converted much of the USB documentation over to RST. Plus the usual set of fixes, improvements, and tweaks. There's a bit more than the usual amount of reaching out of Documentation/ to fix comments elsewhere in the tree; I have acks for those where I could get them" * tag 'docs-4.12' of git://git.lwn.net/linux: (74 commits) docs: Fix a couple typos docs: Fix a spelling error in vfio-mediated-device.txt docs: Fix a spelling error in ioctl-number.txt MAINTAINERS: update file entry for HSI subsystem Documentation: allow installing man pages to a user defined directory Doc/PM: Sync with intel_powerclamp code behavior zr364xx.rst: usb/devices is now at /sys/kernel/debug/ usb.rst: move documentation from proc_usb_info.txt to USB ReST book convert philips.txt to ReST and add to media docs docs-rst: usb: update old usbfs-related documentation arm: Documentation: update a path name docs: process/4.Coding.rst: Fix a couple of document refs docs-rst: fix usb cross-references usb: gadget.h: be consistent at kernel doc macros usb: composite.h: fix two warnings when building docs usb: get rid of some ReST doc build errors usb.rst: get rid of some Sphinx errors usb/URB.txt: convert to ReST and update it usb/persist.txt: convert to ReST and add to driver-api book usb/hotplug.txt: convert to ReST and add to driver-api book ...
2017-04-20usb.rst: move documentation from proc_usb_info.txt to USB ReST bookMauro Carvalho Chehab
The contents of proc_usb_info.txt complements what's there at driver-api usb book. Yet, it is outdated, as it still refers to the USB character devices as usbfs. So, move the contents to usb.rst, adjusting it to point to the right places. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2017-04-20docs-rst: usb: update old usbfs-related documentationMauro Carvalho Chehab
There's no usbfs anymore. The old features are now either exported to /dev/bus/usb or via debugfs. Update documentation accordingly, pointing to the new places where the character devices and usb/devices are now placed. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2017-04-11usb/URB.txt: convert to ReST and update itMauro Carvalho Chehab
The URB doc describes the Kernel mechanism that do USB transfers. While the functions are already described at urb.h, there are a number of concepts and theory that are important for USB driver developers. Convert it to ReST and use C ref links to point to the places at usb.h where each function and struct is located. A few of those descriptions were incomplete. While here, update to reflect the current API status. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2017-04-11usb/persist.txt: convert to ReST and add to driver-api bookMauro Carvalho Chehab
This document describe some USB core features. Add it to the driver-api book. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2017-04-11usb/hotplug.txt: convert to ReST and add to driver-api bookMauro Carvalho Chehab
This document describe some USB core features. Add it to the driver-api book. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2017-04-11error-codes.rst: convert to ReST and add to driver-api bookMauro Carvalho Chehab
This document describe some USB core features. Add it to the driver-api book. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2017-04-11usb/dma.txt: convert to ReST and add to driver-api bookMauro Carvalho Chehab
This document describe some USB core features. Add it to the driver-api book. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2017-04-11usb/power-management.txt: convert to ReST and add to driver-api bookMauro Carvalho Chehab
This document describe some USB core functions. Add it to the driver-api book. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2017-04-11usb/callbacks.txt: convert to ReST and add to driver-api bookMauro Carvalho Chehab
This document describe some USB core functions. Add it to the driver-api book. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2017-04-11usb/bulk-streams.txt: convert to ReST and add to driver-api bookMauro Carvalho Chehab
This document describe some USB core functions. Add it to the driver-api book. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2017-04-11usb/anchors.txt: convert to ReST and add to driver-api bookMauro Carvalho Chehab
This document describe some USB core functions. Add it to the driver-api book. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2017-03-23usb: USB Type-C connector classHeikki Krogerus
The purpose of USB Type-C connector class is to provide unified interface for the user space to get the status and basic information about USB Type-C connectors on a system, control over data role swapping, and when the port supports USB Power Delivery, also control over power role swapping and Alternate Modes. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-and-Tested-by: Felipe Balbi <felipe.balbi@linux.intel.com> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-21usb/doc: Add document for USB3 debug port usageLu Baolu
Add Documentation/usb/usb3-debug-port.rst. This document includes the guide for using USB3 debug port. Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mathias Nyman <mathias.nyman@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: linux-doc@vger.kernel.org Cc: linux-usb@vger.kernel.org Link: http://lkml.kernel.org/r/1490083293-3792-6-git-send-email-baolu.lu@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-02-22Merge tag 'docs-4.11' of git://git.lwn.net/linuxLinus Torvalds
Pull documentation updates from Jonathan Corbet: "A slightly quieter cycle for documentation this time around. Three more DocBook template files have been converted to RST; only 21 to go. There are various build improvements and the usual array of documentation improvements and fixes" * tag 'docs-4.11' of git://git.lwn.net/linux: (44 commits) docs / driver-api: Fix structure references in device_link.rst PM / docs: Fix structure references in device.rst Add a target to check broken external links in the Documentation Documentation: Fix linux-api list typo Documentation: DocBook/Makefile comment typo Improve sparse documentation Documentation: make Makefile.sphinx no-ops quieter Documentation: DMA-ISA-LPC.txt Documentation: input: fix path to input code definitions docs: Remove the copyright year from conf.py docs: Fix a warning in the Korean HOWTO.rst translation PM / sleep / docs: Convert PM notifiers document to reST PM / core / docs: Convert sleep states API document to reST PM / core: Update kerneldoc comments in pm.h doc-rst: Fix recursive make invocation from macros doc-rst: Delete output of failed dot-SVG conversion doc-rst: Break shell command sequences on failure Documentation/sphinx: make targets independent of Sphinx work for HAVE_SPHINX=0 doc-rst: fixed cleandoc target when used with O=dir Documentation/sphinx: prevent generation of .pyc files in the source tree ...
2017-01-26Doc: Fix double words in DocumentationMasanari Iida
This patch fix some double words found in Documentation. Signed-off-by: Masanari Iida <standby24x7@gmail.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2017-01-24usb: gadget: uac2: add req_number as parameterPeter Chen
There are only two requests for uac2, it may not be enough at high loading system which usb interrupt handler can't be serviced on time, then the data will be lost since it is isoc transfer for audio. In this patch, we introduce a parameter for the number for usb request, and the user can override it if current number for request is not enough for his/her use case. Besides, update this parameter for legacy audio gadget and documentation. Signed-off-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-06-23Documentation: tiny typo fix in usb/gadget_multi.txtMichal Nazarewicz
Signed-off-by: Michal Nazarewicz <mina86@mina86.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2016-05-04Merge tag 'usb-ci-v4.7-rc1' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/usb into usb-next Hi Greg, below are changes for chipidea and OTG FSM, no major changes. Some for documentation, some for tiny changes, thanks.
2016-05-04doc: usb: chipidea: update the doc for OTG FSMPeter Chen
Since we have added otg version and HNP polling support, update related documentation. Signed-off-by: Peter Chen <peter.chen@nxp.com>
2016-04-13doc: usb: Fix typo in gadget_multi documentationDiego Herranz
It tries to "match" drivers for each interface (not "much"). Signed-off-by: Diego Herranz <diegoherranz@diegoherranz.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-05usb: devio: Add ioctl to disallow detaching kernel USB drivers.Reilly Grant
The new USBDEVFS_DROP_PRIVILEGES ioctl allows a process to voluntarily relinquish the ability to issue other ioctls that may interfere with other processes and drivers that have claimed an interface on the device. This commit also includes a simple utility to be able to test the ioctl, located at Documentation/usb/usbdevfs-drop-permissions.c Example (with qemu-kvm's input device): $ lsusb ... Bus 001 Device 002: ID 0627:0001 Adomax Technology Co., Ltd $ usb-devices ... C: #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=02 Driver=usbhid $ sudo ./usbdevfs-drop-permissions /dev/bus/usb/001/002 OK: privileges dropped! Available options: [0] Exit now [1] Reset device. Should fail if device is in use [2] Claim 4 interfaces. Should succeed where not in use [3] Narrow interface permission mask Which option shall I run?: 1 ERROR: USBDEVFS_RESET failed! (1 - Operation not permitted) Which test shall I run next?: 2 ERROR claiming if 0 (1 - Operation not permitted) ERROR claiming if 1 (1 - Operation not permitted) ERROR claiming if 2 (1 - Operation not permitted) ERROR claiming if 3 (1 - Operation not permitted) Which test shall I run next?: 0 After unbinding usbhid: $ usb-devices ... I: If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=02 Driver=(none) $ sudo ./usbdevfs-drop-permissions /dev/bus/usb/001/002 ... Which option shall I run?: 2 OK: claimed if 0 ERROR claiming if 1 (1 - Operation not permitted) ERROR claiming if 2 (1 - Operation not permitted) ERROR claiming if 3 (1 - Operation not permitted) Which test shall I run next?: 1 OK: USBDEVFS_RESET succeeded Which test shall I run next?: 0 After unbinding usbhid and restricting the mask: $ sudo ./usbdevfs-drop-permissions /dev/bus/usb/001/002 ... Which option shall I run?: 3 Insert new mask: 0 OK: privileges dropped! Which test shall I run next?: 2 ERROR claiming if 0 (1 - Operation not permitted) ERROR claiming if 1 (1 - Operation not permitted) ERROR claiming if 2 (1 - Operation not permitted) ERROR claiming if 3 (1 - Operation not permitted) Signed-off-by: Reilly Grant <reillyg@chromium.org> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Emilio López <emilio.lopez@collabora.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-04Merge tag 'usb-for-v4.6' of ↵Greg Kroah-Hartman
http://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next Felipe writes: usb changes for v4.6 merge window This is almost all under drivers/usb/dwc2/. Many changes to the host side implementation of dwc2 have been done by Douglas Anderson. We also have USB 3.1 support added to the Gadget Framework and, because of that work, dwc3 got support to Synopsys new DWC_usb31 IP core. Other than these 2 important series, we also have the usual collection of non-critical fixes, Documentation updates, and minor changes all over the place.
2016-03-04Documentation: usb: chipidea: Update test procedure for HNP pollingLi Jun
Update HNP test procedure as HNP polling is supported. Acked-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Li Jun <jun.li@nxp.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2016-03-03usbip: move usbip_protocol.txt to DocumentationChristian Lamparter
The usbip_protocol.txt, a document which describes usbip's inner workings is currently located in the projects source directory (drivers/usb/usbip/...). This patch moves it to Documentation/usb. This discussion was brought up by Guy Harris [0] during the review of the USBIP dissector I wrote. For anyone interested: support is available with the latest wireshark master/dev tree. Simply select a packet from the usbip's tcp-stream you are intrested on and select the USBIP as the protocol in the "Decode As" dialog box [1]. Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> [0] <https://bugs.wireshark.org/bugzilla/show_bug.cgi?id=12127#c2> [1] <https://www.wireshark.org/docs/wsug_html_chunked/ChCustProtocolDissectionSection.html#ChAdvDecodeAs> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-12-26Merge tag 'usb-ci-v4.5-rc1' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/usb into usb-testing Peter writes: The chipidea changes for v4.5-rc1 - Delete static debug for chipidea driver. - Suspend USB core when A device tries to switch to peripheral mode, at former design, it just stopped SoF simply but USB core doesn't know it. - Several small changes.
2015-12-26Merge tag 'usb-for-v4.5' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next Felipe writes: usb: patches for v4.5 A ton of improvements to dwc2 have been made. The driver should be a lot more stable on v4.5 then ever before. Our good old dwc3 got a few cleanups and misc fixes and also added support to Xilinx's integration of this IP. Yoshihiro Shimoda gives us support for a new USB3 peripheral controller from Renesas. Other than these, the usual misc fixes all over the place.
2015-12-24usb: chipidea: clean up CONFIG_USB_CHIPIDEA_DEBUG referencePeter Chen
Since this configuration option has deleted, cleans up all its references. Signed-off-by: Peter Chen <peter.chen@freescale.com> Reported-by: Valentin Rothberg <valentinrothberg@gmail.com>
2015-12-16Documentation: usb: update usb-tools repository addressRobert Baldyga
It seems that gitorious repository is no longer accessible, so we replace it with address to active repository. Signed-off-by: Robert Baldyga <r.baldyga@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-12-15Documentation: usb: gadget-testing: add description for depth of queuePeter Chen
Add both bulk and iso depth of queue for sourcesink. Reviewed-by: Krzysztof Opasiak <k.opasiak@samsung.com> Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-12-01usb: core: lpm: fix usb3_hardware_lpm sysfs nodeLu Baolu
Commit 655fe4effe0f ("usbcore: add sysfs support to xHCI usb3 hardware LPM") introduced usb3_hardware_lpm sysfs node. This doesn't show the correct status of USB3 U1 and U2 LPM status. This patch fixes this by replacing usb3_hardware_lpm with two nodes, usb3_hardware_lpm_u1 (for U1) and usb3_hardware_lpm_u2 (for U2), and recording the U1/U2 LPM status in right places. This patch should be back-ported to kernels as old as 4.3, that contains Commit 655fe4effe0f ("usbcore: add sysfs support to xHCI usb3 hardware LPM"). Cc: stable@vger.kernel.org Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-22usb: interface authorization: Documentation partStefan Koch
This part adds the documentation for the interface authorization. Signed-off-by: Stefan Koch <stefan.koch10@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-18Revert "usb: interface authorization: Documentation part"Greg Kroah-Hartman
This reverts commit 6ef2bf71764708f7c58ee9300acd8df05dbaa06f as the signed-off-by address is invalid. Cc: Stefan Koch <stefan.koch10@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-14usb: interface authorization: Documentation partStefan Koch
This part adds the documentation for the interface authorization. Signed-off-by: Stefan Koch <skoch@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-14Merge tag 'usb-for-v4.3' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next Felipe writes: usb: patches for v4.3 merge window New support for Allwinne SoC on the MUSB driver has been added to the list of glue layers. MUSB also got support for building all DMA engines in one binary; this will be great for distros. DWC3 now has no trace of dev_dbg()/dev_vdbg() usage. We will rely solely on tracing to debug DWC3. There was also a fix for memory corruption with EP0 when maxpacket size transfers are > 512 bytes. Robert's EP capabilities flags is making EP selection a lot simpler. UDCs are now required to set these flags up when adding endpoints to the framework. Other than these, we have the usual set of miscelaneous cleanups and minor fixes. Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-07-31doc: usb: gadget-testing: using the updated testusb.cPeter Chen
testusb.c at http://www.linux-usb.org/usbtest/ is out of date, using the one at the kernel source folder. Cc: <stable@vger.kernel.org> Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-07-22usbcore: add sysfs support to xHCI usb3 hardware LPMKevin Strasser
Add a sysfs node to make it easier to verify if LPM is supported and being enabled for USB 3.0 devices. Signed-off-by: Kevin Strasser <kevin.strasser@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-06-26Merge tag 'usb-4.2-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB updates from Greg KH: "Here's the big USB patchset for 4.2-rc1. As is normal these days, the majority of changes are in the gadget drivers, with a bunch of other small driver changes. All of these have been in linux-next with no reported issues" * tag 'usb-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (175 commits) usb: dwc3: Use ASCII space in Kconfig usb: chipidea: add work-around for Marvell HSIC PHY startup usb: chipidea: allow multiple instances to use default ci_default_pdata dt-bindings: Consolidate ChipIdea USB ci13xxx bindings phy: add Marvell HSIC 28nm PHY phy: Add Marvell USB 2.0 OTG 28nm PHY dt-bindings: Add Marvell PXA1928 USB and HSIC PHY bindings USB: ssb: use devm_kzalloc USB: ssb: fix error handling in ssb_hcd_create_pdev() usb: isp1760: check for null return from kzalloc cdc-acm: Add support of ATOL FPrint fiscal printers usb: chipidea: usbmisc_imx: Remove unneeded semicolon USB: usbtmc: add device quirk for Rigol DS6104 USB: serial: mos7840: Use setup_timer phy: twl4030-usb: add ABI documentation phy: twl4030-usb: remove incorrect pm_runtime_get_sync() in probe function. phy: twl4030-usb: remove pointless 'suspended' test in 'suspend' callback. phy: twl4030-usb: make runtime pm more reliable. drivers:usb:fsl: Fix compilation error for fsl ehci drv usb: renesas_usbhs: Don't disable the pipe if Control write status stage ...
2015-05-07usb: gadget: rndis: remove the limit of available rndis connectionsAndrzej Pietrasiewicz
RNDIS function has a limitation on the number of allowed instances. So far it has been RNDIS_MAX_CONFIGS, which happens to be one. In order to eliminate this kind of arbitrary limitation we should not preallocate a predefined (RNDIS_MAX_CONFIGS) array of struct rndis_params instances but instead allow allocating them on demand. This patch allocates struct rndis_params on demand in rndis_register(). Coversly, the structure is free()'d in rndis_deregister(). If CONFIG_USB_GADGET_DEBUG_FILES is set, the proc files are created which is the same behaviour as before, but the moment of creation is delayed until struct rndis_params is actually allocated. rnids_init() and rndis_exit() have nothing to do, so they are eliminated. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-05-07Documentation usb serial: fixed how to provide vendor and product idH. Nikolaus Schaller
While trying to test a Cinterion GSM/GPS/3G module I had reconfigured the USB interface by mistake and therefore needed to run a different USB driver than CDC-ACM. It turned out that I need the "usbserial" driver. This file is an official description how to use it: Documentation/usb/usb-serial.txt But it is outdated. The parameters vendor= and product= have been superseded by a /sys interface. Here was the solution: https://bbs.archlinux.org/viewtopic.php?id=175499 insmod usbserial vendor=0x#### product=0x#### becomes (first #### is vendor, second is product) modprobe usbserial echo #### #### >/sys/bus/usb-serial/drivers/generic/new_id This patch changes the documentation file to describe the modern variant. Please note that the old one still works (if compiled as module). Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Signed-off-by: Marek Belisko <marek@goldelico.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2015-04-27usb: Documentation: gadget-testing: fix parameter for capture channel maskPeter Chen
Fix the UAC2 parameter capture channel mask Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-03-24Merge tag 'usb-for-v4.1' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next Felipe writes: usb: patches for v4.1 merge window As usual, a big pile of commits. This time a total of 111 non-merge commits. Other than the usual set of cleanups and non-critical fixes, we have some interesting work for AM335x's MUSB babble recovery. Now that takes a lot less time and we don't have to Reset MUSB all the time. The printer gadget has been converted to configfs interface and the atmel udc has learned suspend/resume with wakeup. Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-03-18doc: usb: chipidea: add usb wakeup enable examplePeter Chen
Add the example for how to enable USB as system wakeup source. Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-10usb: gadget: printer: add configfs supportAndrzej Pietrasiewicz
Add support for configfs interface so that f_printer can be used as a component of usb gadgets composed with it. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-02-04Merge tag 'usb-for-v3.20' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next Felipe writes: usb: patches for v3.20 merge window Here's the big pull request for Gadgets and PHYs. It's a total of 217 non-merge commits with pretty much everything being touched. The most important bits are a ton of new documentation for almost all usb gadget functions, a new isp1760 UDC driver, several improvements to the old net2280 UDC driver, and some minor tracepoint improvements to dwc3. Other than that, a big list of minor cleanups, smaller bugfixes and new features all over the place. Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-12Documentation: usb: UVC function testingAndrzej Pietrasiewicz
Summary of how to test UVC function of USB gadget. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-12Documentation: usb: UAC2 function testingAndrzej Pietrasiewicz
Summary of how to test UAC2 function of USB gadget. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-12Documentation: usb: UAC1 function testingAndrzej Pietrasiewicz
Summary of how to test UAC1 function of USB gadget. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-12Documentation: usb: SOURCESINK function testingAndrzej Pietrasiewicz
Summary of how to test SOURCESINK function of USB gadget. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>