| Age | Commit message (Collapse) | Author |
|---|
|
Older Samsung Exynos SoCs (Exynos3250, Exynos4, Exynos5, Exynos5433)
expected pin controller node with external wake-up interrupts to have
one interrupt for multiplexing these wake-up interrupts. Also they
expected to have exactly one such pin controller (capable of external
wake-up interrupts).
It seems however that newer ARMv8 Exynos SoCs like Exynos850 and
ExynosAutov9 have differences of their pin controllers capable of
external wake-up interrupts:
1. No multiplexed external wake-up interrupt, only direct,
2. More than one pin controller capable of external wake-up interrupts.
Add dedicated Exynos850 and ExynosAutov9 compatibles.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220111201722.327219-19-krzysztof.kozlowski@canonical.com
|
|
Convert the Samsung SoC (S3C24xx, S3C64xx, S5Pv210, Exynos) pin
controller bindings to DT schema format. Parts of description and DTS
example was copied from existing sources, so keep the license as
GPL-2.0-only.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20220111201722.327219-18-krzysztof.kozlowski@canonical.com
|
|
Merge yet more updates from Andrew Morton:
"This is the post-linux-next queue. Material which was based on or
dependent upon material which was in -next.
69 patches.
Subsystems affected by this patch series: mm (migration and zsmalloc),
sysctl, proc, and lib"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (69 commits)
mm: hide the FRONTSWAP Kconfig symbol
frontswap: remove support for multiple ops
mm: mark swap_lock and swap_active_head static
frontswap: simplify frontswap_register_ops
frontswap: remove frontswap_test
mm: simplify try_to_unuse
frontswap: remove the frontswap exports
frontswap: simplify frontswap_init
frontswap: remove frontswap_curr_pages
frontswap: remove frontswap_shrink
frontswap: remove frontswap_tmem_exclusive_gets
frontswap: remove frontswap_writethrough
mm: remove cleancache
lib/stackdepot: always do filter_irq_stacks() in stack_depot_save()
lib/stackdepot: allow optional init and stack_table allocation by kvmalloc()
proc: remove PDE_DATA() completely
fs: proc: store PDE()->data into inode->i_private
zsmalloc: replace get_cpu_var with local_lock
zsmalloc: replace per zpage lock with pool->migrate_lock
locking/rwlocks: introduce write_lock_nested
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree fixes and cleanups from Rob Herring:
- Fix a regression when probing a child device reusing the parent
device's DT node pointer
- Refactor of_parse_phandle*() variants to static inlines
- Drop Enric Balletbo i Serra as a maintainer
- Fix DT schemas with arrays incorrectly encoded as a matrix
- Drop unneeded pinctrl properties from schemas
- Add SPI peripheral schema to SPI based displays
- Clean-up several schema examples
- Clean-up trivial-devices.yaml comments
- Add missing, in use vendor prefixes: Wingtech, Thundercomm, Huawei,
F(x)tec, 8devices
* tag 'devicetree-fixes-for-5.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
dt-bindings: google,cros-ec: drop Enric Balletbo i Serra from maintainers
dt-bindings: display: bridge: drop Enric Balletbo i Serra from maintainers
of: Check 'of_node_reused' flag on of_match_device()
of: property: define of_property_read_u{8,16,32,64}_array() unconditionally
of: base: make small of_parse_phandle() variants static inline
dt-bindings: mfd: cirrus,madera: Fix 'interrupts' in example
dt-bindings: Fix array schemas encoded as matrices
dt-bindings: Drop unnecessary pinctrl properties
dt-bindings: rtc: st,stm32-rtc: Make each example a separate entry
dt-bindings: mmc: arm,pl18x: Make each example a separate entry
dt-bindings: display: Add SPI peripheral schema to SPI based displays
scripts/dtc: dtx_diff: remove broken example from help text
dt-bindings: trivial-devices: fix double spaces in comments
dt-bindings: trivial-devices: fix swapped comments
dt-bindings: vendor-prefixes: add Wingtech
dt-bindings: vendor-prefixes: add Thundercomm
dt-bindings: vendor-prefixes: add Huawei
dt-bindings: vendor-prefixes: add F(x)tec
dt-bindings: vendor-prefixes: add 8devices
dt-bindings: power: reset: gpio-restart: Correct default priority
|
|
Pull more kvm updates from Paolo Bonzini:
"Generic:
- selftest compilation fix for non-x86
- KVM: avoid warning on s390 in mark_page_dirty
x86:
- fix page write-protection bug and improve comments
- use binary search to lookup the PMU event filter, add test
- enable_pmu module parameter support for Intel CPUs
- switch blocked_vcpu_on_cpu_lock to raw spinlock
- cleanups of blocked vCPU logic
- partially allow KVM_SET_CPUID{,2} after KVM_RUN (5.16 regression)
- various small fixes"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (46 commits)
docs: kvm: fix WARNINGs from api.rst
selftests: kvm/x86: Fix the warning in lib/x86_64/processor.c
selftests: kvm/x86: Fix the warning in pmu_event_filter_test.c
kvm: selftests: Do not indent with spaces
kvm: selftests: sync uapi/linux/kvm.h with Linux header
selftests: kvm: add amx_test to .gitignore
KVM: SVM: Nullify vcpu_(un)blocking() hooks if AVIC is disabled
KVM: SVM: Move svm_hardware_setup() and its helpers below svm_x86_ops
KVM: SVM: Drop AVIC's intermediate avic_set_running() helper
KVM: VMX: Don't do full kick when handling posted interrupt wakeup
KVM: VMX: Fold fallback path into triggering posted IRQ helper
KVM: VMX: Pass desired vector instead of bool for triggering posted IRQ
KVM: VMX: Don't do full kick when triggering posted interrupt "fails"
KVM: SVM: Skip AVIC and IRTE updates when loading blocking vCPU
KVM: SVM: Use kvm_vcpu_is_blocking() in AVIC load to handle preemption
KVM: SVM: Remove unnecessary APICv/AVIC update in vCPU unblocking path
KVM: SVM: Don't bother checking for "running" AVIC when kicking for IPIs
KVM: SVM: Signal AVIC doorbell iff vCPU is in guest mode
KVM: x86: Remove defunct pre_block/post_block kvm_x86_ops hooks
KVM: x86: Unexport LAPIC's switch_to_{hv,sw}_timer() helpers
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull more RISC-V updates from Palmer Dabbelt:
- Support for sv48 paging
- Hart ID mappings are now sparse, which enables more CPUs to come up
on systems with sparse hart IDs
- A handful of cleanups and fixes
* tag 'riscv-for-linus-5.17-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (27 commits)
RISC-V: nommu_virt: Drop unused SLAB_MERGE_DEFAULT
RISC-V: Remove redundant err variable
riscv: dts: sifive unmatched: Add gpio poweroff
riscv: canaan: remove useless select of non-existing config SYSCON
RISC-V: Do not use cpumask data structure for hartid bitmap
RISC-V: Move spinwait booting method to its own config
RISC-V: Move the entire hart selection via lottery to SMP
RISC-V: Use __cpu_up_stack/task_pointer only for spinwait method
RISC-V: Do not print the SBI version during HSM extension boot print
RISC-V: Avoid using per cpu array for ordered booting
riscv: default to CONFIG_RISCV_SBI_V01=n
riscv: fix boolconv.cocci warnings
riscv: Explicit comment about user virtual address space size
riscv: Use pgtable_l4_enabled to output mmu_type in cpuinfo
riscv: Implement sv48 support
asm-generic: Prepare for riscv use of pud_alloc_one and pud_free
riscv: Allow to dynamically define VA_BITS
riscv: Introduce functions to switch pt_ops
riscv: Split early kasan mapping to prepare sv48 introduction
riscv: Move KASAN mapping next to the kernel mapping
...
|
|
Pull documentation fixes from Jonathan Corbet:
"Three small documentation fixes"
* tag 'docs-5.17-2' of git://git.lwn.net/linux:
Documentation: fix firewire.rst ABI file path error
docs: ftrace: fix ambiguous sentence
docs: staging/tee.rst: fix two typos found while reading
|
|
frontswap_shrink is never called, so remove it.
Link: https://lkml.kernel.org/r/20211224062246.1258487-5-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Juergen Gross <jgross@suse.com>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Konrad Rzeszutek Wilk <Konrad.wilk@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Vitaly Wool <vitaly.wool@konsulko.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
frontswap_writethrough is never called, so remove it.
Link: https://lkml.kernel.org/r/20211224062246.1258487-3-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Juergen Gross <jgross@suse.com>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Konrad Rzeszutek Wilk <Konrad.wilk@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Vitaly Wool <vitaly.wool@konsulko.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Patch series "remove Xen tmem leftovers".
Since the removal of the Xen tmem driver in 2019, the cleancache hooks
are entirely unused, as are large parts of frontswap. This series
against linux-next (with the folio changes included) removes
cleancaches, and cuts down frontswap to the bits actually used by zswap.
This patch (of 13):
The cleancache subsystem is unused since the removal of Xen tmem driver
in commit 814bbf49dcd0 ("xen: remove tmem driver").
[akpm@linux-foundation.org: remove now-unreachable code]
Link: https://lkml.kernel.org/r/20211224062246.1258487-1-hch@lst.de
Link: https://lkml.kernel.org/r/20211224062246.1258487-2-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Juergen Gross <jgross@suse.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Konrad Rzeszutek Wilk <Konrad.wilk@oracle.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Vitaly Wool <vitaly.wool@konsulko.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
Pull RTC updates from Alexandre Belloni:
"Two new drivers this cycle and a significant rework of the CMOS driver
make the bulk of the changes.
I also carry powerpc changes with the agreement of Michael.
New drivers:
- Sunplus SP7021 RTC
- Nintendo GameCube, Wii and Wii U RTC
Driver updates:
- cmos: refactor UIP handling and presence check, fix century
- rs5c372: offset correction support, report low voltage
- rv8803: Epson RX8804 support"
* tag 'rtc-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (33 commits)
rtc: sunplus: fix return value in sp_rtc_probe()
rtc: cmos: Evaluate century appropriate
rtc: gamecube: Fix an IS_ERR() vs NULL check
rtc: mc146818-lib: fix signedness bug in mc146818_get_time()
dt-bindings: rtc: qcom-pm8xxx-rtc: update register numbers
rtc: pxa: fix null pointer dereference
rtc: ftrtc010: Use platform_get_irq() to get the interrupt
rtc: Move variable into switch case statement
rtc: pcf2127: Fix typo in comment
dt-bindings: rtc: Add Sunplus RTC json-schema
rtc: Add driver for RTC in Sunplus SP7021
rtc: rs5c372: fix incorrect oscillation value on r2221tl
rtc: rs5c372: add offset correction support
rtc: cmos: avoid UIP when writing alarm time
rtc: cmos: avoid UIP when reading alarm time
rtc: mc146818-lib: refactor mc146818_does_rtc_work
rtc: mc146818-lib: refactor mc146818_get_time
rtc: mc146818-lib: extract mc146818_avoid_UIP
rtc: mc146818-lib: fix RTC presence check
rtc: Check return value from mc146818_get_time()
...
|
|
Adjust the path of the ABI files for firewire.rst to prevent a
documentation build error. Prevents this problem:
Sphinx parallel build error:
docutils.utils.SystemMessage: Documentation/driver-api/firewire.rst:22: (SEVERE/4) Problems with "include" directive path:
InputError: [Errno 2] No such file or directory: '../Documentation/driver-api/ABI/stable/firewire-cdev'.
Fixes: 2f4830ef96d2 ("FireWire: add driver-api Introduction section")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Akira Yokosawa <akiyks@gmail.com>
Link: https://lore.kernel.org/r/20220119033905.4779-1-rdunlap@infradead.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Enric Balletbo i Serra emails bounce:
<enric.balletbo@collabora.com>: Recipient address rejected: User unknown in local recipient table
so drop him from the maintainers, similarly to commit 3119c28634dd
("MAINTAINERS: Chrome: Drop Enric Balletbo i Serra").
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Enric Balletbo i Serra <eballetbo@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220120104009.159147-2-krzysztof.kozlowski@canonical.com
|
|
Enric Balletbo i Serra emails bounce:
<enric.balletbo@collabora.com>: Recipient address rejected: User unknown in local recipient table
so drop him from the maintainers, similarly to commit 3119c28634dd
("MAINTAINERS: Chrome: Drop Enric Balletbo i Serra"). Add generic DRM
bridge maintainers to Analogix ANX7814.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Enric Balletbo i Serra <eballetbo@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220120104009.159147-1-krzysztof.kozlowski@canonical.com
|
|
The 'interrupts' properties takes an irq number, not a phandle, and
'interrupt-parent' isn't needed in examples.
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220119015611.2442819-1-robh@kernel.org
|
|
The YAML DT encoding has leaked into some array properties. Properties
which are defined as an array should have a schema that's just an array.
That means there should only be a single level of 'minItems',
'maxItems', and/or 'items'.
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de>
Link: https://lore.kernel.org/r/20220119015627.2443334-1-robh@kernel.org
|
|
For a single pinctrl mode, it is not necessary to define pinctrl
properties as the tools always allow pinctrl properties.
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20220119015325.2438277-1-robh@kernel.org
|
|
Use the api number 134 for KVM_GET_XSAVE2, instead of 42, which has been
used by KVM_GET_XSAVE.
Also, fix the WARNINGs of the underlines being too short.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Wei Wang <wei.w.wang@intel.com>
Tested-by: Stephen Rothwell <sfr@canb.auug.org.au>
Message-Id: <20220120045003.315177-1-wei.w.wang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Pull ceph updates from Ilya Dryomov:
"The highlight is the new mount "device" string syntax implemented by
Venky Shankar. It solves some long-standing issues with using
different auth entities and/or mounting different CephFS filesystems
from the same cluster, remounting and also misleading /proc/mounts
contents. The existing syntax of course remains to be maintained.
On top of that, there is a couple of fixes for edge cases in quota and
a new mount option for turning on unbuffered I/O mode globally instead
of on a per-file basis with ioctl(CEPH_IOC_SYNCIO)"
* tag 'ceph-for-5.17-rc1' of git://github.com/ceph/ceph-client:
ceph: move CEPH_SUPER_MAGIC definition to magic.h
ceph: remove redundant Lsx caps check
ceph: add new "nopagecache" option
ceph: don't check for quotas on MDS stray dirs
ceph: drop send metrics debug message
rbd: make const pointer spaces a static const array
ceph: Fix incorrect statfs report for small quota
ceph: mount syntax module parameter
doc: document new CephFS mount device syntax
ceph: record updated mon_addr on remount
ceph: new device mount syntax
libceph: rename parse_fsid() to ceph_parse_fsid() and export
libceph: generalize addr/ip parsing based on delimiter
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm
Pull pwm updates from Thierry Reding:
"This contains a number of nice cleanups and improvements for the core
and various drivers, as well as a minor tweak to the json-schema
device tree bindings"
* tag 'pwm/for-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm:
dt-bindings: pwm: Avoid selecting schema on node name match
pwm: img: Use only a single idiom to get a runtime PM reference
pwm: vt8500: Implement .apply() callback
pwm: img: Implement .apply() callback
pwm: twl: Implement .apply() callback
pwm: Restore initial state if a legacy callback fails
pwm: Prevent a glitch for legacy drivers
pwm: Move legacy driver handling into a dedicated function
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from netfilter, bpf.
Quite a handful of old regression fixes but most of those are
pre-5.16.
Current release - regressions:
- fix memory leaks in the skb free deferral scheme if upper layer
protocols are used, i.e. in-kernel TCP readers like TLS
Current release - new code bugs:
- nf_tables: fix NULL check typo in _clone() functions
- change the default to y for Vertexcom vendor Kconfig
- a couple of fixes to incorrect uses of ref tracking
- two fixes for constifying netdev->dev_addr
Previous releases - regressions:
- bpf:
- various verifier fixes mainly around register offset handling
when passed to helper functions
- fix mount source displayed for bpffs (none -> bpffs)
- bonding:
- fix extraction of ports for connection hash calculation
- fix bond_xmit_broadcast return value when some devices are down
- phy: marvell: add Marvell specific PHY loopback
- sch_api: don't skip qdisc attach on ingress, prevent ref leak
- htb: restore minimal packet size handling in rate control
- sfp: fix high power modules without diagnostic monitoring
- mscc: ocelot:
- don't let phylink re-enable TX PAUSE on the NPI port
- don't dereference NULL pointers with shared tc filters
- smsc95xx: correct reset handling for LAN9514
- cpsw: avoid alignment faults by taking NET_IP_ALIGN into account
- phy: micrel: use kszphy_suspend/_resume for irq aware devices,
avoid races with the interrupt
Previous releases - always broken:
- xdp: check prog type before updating BPF link
- smc: resolve various races around abnormal connection termination
- sit: allow encapsulated IPv6 traffic to be delivered locally
- axienet: fix init/reset handling, add missing barriers, read the
right status words, stop queues correctly
- add missing dev_put() in sock_timestamping_bind_phc()
Misc:
- ipv4: prevent accidentally passing RTO_ONLINK to
ip_route_output_key_hash() by sanitizing flags
- ipv4: avoid quadratic behavior in netns dismantle
- stmmac: dwmac-oxnas: add support for OX810SE
- fsl: xgmac_mdio: add workaround for erratum A-009885"
* tag 'net-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (92 commits)
ipv4: add net_hash_mix() dispersion to fib_info_laddrhash keys
ipv4: avoid quadratic behavior in netns dismantle
net/fsl: xgmac_mdio: Fix incorrect iounmap when removing module
powerpc/fsl/dts: Enable WA for erratum A-009885 on fman3l MDIO buses
dt-bindings: net: Document fsl,erratum-a009885
net/fsl: xgmac_mdio: Add workaround for erratum A-009885
net: mscc: ocelot: fix using match before it is set
net: phy: micrel: use kszphy_suspend()/kszphy_resume for irq aware devices
net: cpsw: avoid alignment faults by taking NET_IP_ALIGN into account
nfc: llcp: fix NULL error pointer dereference on sendmsg() after failed bind()
net: axienet: increase default TX ring size to 128
net: axienet: fix for TX busy handling
net: axienet: fix number of TX ring slots for available check
net: axienet: Fix TX ring slot available check
net: axienet: limit minimum TX ring size
net: axienet: add missing memory barriers
net: axienet: reset core on initialization prior to MDIO access
net: axienet: Wait for PhyRstCmplt after core reset
net: axienet: increase reset timeout
bpf, selftests: Add ringbuf memory type confusion test
...
|
|
Merge more updates from Andrew Morton:
"55 patches.
Subsystems affected by this patch series: percpu, procfs, sysctl,
misc, core-kernel, get_maintainer, lib, checkpatch, binfmt, nilfs2,
hfs, fat, adfs, panic, delayacct, kconfig, kcov, and ubsan"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (55 commits)
lib: remove redundant assignment to variable ret
ubsan: remove CONFIG_UBSAN_OBJECT_SIZE
kcov: fix generic Kconfig dependencies if ARCH_WANTS_NO_INSTR
lib/Kconfig.debug: make TEST_KMOD depend on PAGE_SIZE_LESS_THAN_256KB
btrfs: use generic Kconfig option for 256kB page size limit
arch/Kconfig: split PAGE_SIZE_LESS_THAN_256KB from PAGE_SIZE_LESS_THAN_64KB
configs: introduce debug.config for CI-like setup
delayacct: track delays from memory compact
Documentation/accounting/delay-accounting.rst: add thrashing page cache and direct compact
delayacct: cleanup flags in struct task_delay_info and functions use it
delayacct: fix incomplete disable operation when switch enable to disable
delayacct: support swapin delay accounting for swapping without blkio
panic: remove oops_id
panic: use error_report_end tracepoint on warnings
fs/adfs: remove unneeded variable make code cleaner
FAT: use io_schedule_timeout() instead of congestion_wait()
hfsplus: use struct_group_attr() for memcpy() region
nilfs2: remove redundant pointer sbufs
fs/binfmt_elf: use PT_LOAD p_align values for static PIE
const_structs.checkpatch: add frequently used ops structs
...
|
|
direct compact
Add thrashing page cache and direct compact related descriptions and
update the usage of getdelays userspace utility.
The following patches modifications have been updated:
https://lore.kernel.org/all/20190312102002.31737-4-jinpuwang@gmail.com/
https://lore.kernel.org/all/1638619795-71451-1-git-send-email-
wang.yong12@zte.com.cn/
Link: https://lkml.kernel.org/r/1639583021-92977-1-git-send-email-wang.yong12@zte.com.cn
Signed-off-by: wangyong <wang.yong12@zte.com.cn>
Reviewed-by: Yang Yang <yang.yang29@zte.com.cn>
Reported-by: Zeal Robot <zealci@zte.com.cn>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This patchset allows to have a single kernel for sv39 and sv48 without
being relocatable.
The idea comes from Arnd Bergmann who suggested to do the same as x86,
that is mapping the kernel to the end of the address space, which allows
the kernel to be linked at the same address for both sv39 and sv48 and
then does not require to be relocated at runtime.
This implements sv48 support at runtime. The kernel will try to boot
with 4-level page table and will fallback to 3-level if the HW does not
support it. Folding the 4th level into a 3-level page table has almost
no cost at runtime.
Note that kasan region had to be moved to the end of the address space
since its location must be known at compile-time and then be valid for
both sv39 and sv48 (and sv57 that is coming).
* riscv-sv48-v3:
riscv: Explicit comment about user virtual address space size
riscv: Use pgtable_l4_enabled to output mmu_type in cpuinfo
riscv: Implement sv48 support
asm-generic: Prepare for riscv use of pud_alloc_one and pud_free
riscv: Allow to dynamically define VA_BITS
riscv: Introduce functions to switch pt_ops
riscv: Split early kasan mapping to prepare sv48 introduction
riscv: Move KASAN mapping next to the kernel mapping
riscv: Get rid of MAXPHYSMEM configs
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Now that KASAN_SHADOW_OFFSET is defined at compile time as a config,
this value must remain constant whatever the size of the virtual address
space, which is only possible by pushing this region at the end of the
address space next to the kernel mapping.
Signed-off-by: Alexandre Ghiti <alexandre.ghiti@canonical.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Bring in fix for VT-d posted interrupts before further changing the code in 5.17.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Update FMan binding documentation with the newly added workaround for
erratum A-009885.
Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Each independent example should be a separate entry. This allows for
'interrupts' to have different cell sizes.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220106182518.1435497-7-robh@kernel.org
|
|
Each independent example should be a separate entry. This and dropping
'interrupt-parent' allows for 'interrupts' to have different cell sizes.
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20220106182518.1435497-6-robh@kernel.org
|
|
With 'unevaluatedProperties' support enabled, several SPI based display
binding examples have warnings:
Documentation/devicetree/bindings/display/panel/samsung,ld9040.example.dt.yaml: lcd@0: Unevaluated properties are not allowed ('#address-cells', '#size-cells', 'spi-max-frequency', 'spi-cpol', 'spi-cpha' were unexpected)
Documentation/devicetree/bindings/display/panel/kingdisplay,kd035g6-54nt.example.dt.yaml: panel@0: Unevaluated properties are not allowed ('spi-max-frequency', 'spi-3wire' were unexpected)
Documentation/devicetree/bindings/display/panel/ilitek,ili9322.example.dt.yaml: display@0: Unevaluated properties are not allowed ('reg' was unexpected)
Documentation/devicetree/bindings/display/panel/samsung,s6e63m0.example.dt.yaml: display@0: Unevaluated properties are not allowed ('spi-max-frequency' was unexpected)
Documentation/devicetree/bindings/display/panel/abt,y030xx067a.example.dt.yaml: panel@0: Unevaluated properties are not allowed ('spi-max-frequency' was unexpected)
Documentation/devicetree/bindings/display/panel/sony,acx565akm.example.dt.yaml: panel@2: Unevaluated properties are not allowed ('spi-max-frequency', 'reg' were unexpected)
Documentation/devicetree/bindings/display/panel/tpo,td.example.dt.yaml: panel@0: Unevaluated properties are not allowed ('spi-max-frequency', 'spi-cpol', 'spi-cpha' were unexpected)
Documentation/devicetree/bindings/display/panel/lgphilips,lb035q02.example.dt.yaml: panel@0: Unevaluated properties are not allowed ('reg', 'spi-max-frequency', 'spi-cpol', 'spi-cpha' were unexpected)
Documentation/devicetree/bindings/display/panel/innolux,ej030na.example.dt.yaml: panel@0: Unevaluated properties are not allowed ('spi-max-frequency' was unexpected)
Documentation/devicetree/bindings/display/panel/sitronix,st7789v.example.dt.yaml: panel@0: Unevaluated properties are not allowed ('spi-max-frequency', 'spi-cpol', 'spi-cpha' were unexpected)
Fix all of these by adding a reference to spi-peripheral-props.yaml.
With this, the description that the binding must follow
spi-controller.yaml is both a bit out of date and redundant, so remove
it.
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Paul Cercueil <paul@crapouillou.net>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://lore.kernel.org/r/20211221125209.1195932-1-robh@kernel.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs
Pull f2fs updates from Jaegeuk Kim:
"In this round, we've tried to address some performance issues in
f2fs_checkpoint and direct IO flows. Also, there was a work to enhance
the page cache management used for compression. Other than them, we've
done typical work including sysfs, code clean-ups, tracepoint, sanity
check, in addition to bug fixes on corner cases.
Enhancements:
- use iomap for direct IO
- try to avoid lock contention to improve f2fs_ckpt speed
- avoid unnecessary memory allocation in compression flow
- POSIX_FADV_DONTNEED drops the page cache containing compression
pages
- add some sysfs entries (gc_urgent_high_remaining, pending_discard)
Bug fixes:
- try not to expose unwritten blocks to user by DIO (this was added
to avoid merge conflict; another patch is coming to address other
missing case)
- relax minor error condition for file pinning feature used in
Android OTA
- fix potential deadlock case in compression flow
- should not truncate any block on pinned file
In addition, we've done some code clean-ups and tracepoint/sanity
check improvement"
* tag 'f2fs-for-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (29 commits)
f2fs: do not allow partial truncation on pinned file
f2fs: remove redunant invalidate compress pages
f2fs: Simplify bool conversion
f2fs: don't drop compressed page cache in .{invalidate,release}page
f2fs: fix to reserve space for IO align feature
f2fs: fix to check available space of CP area correctly in update_ckpt_flags()
f2fs: support fault injection to f2fs_trylock_op()
f2fs: clean up __find_inline_xattr() with __find_xattr()
f2fs: fix to do sanity check on last xattr entry in __f2fs_setxattr()
f2fs: do not bother checkpoint by f2fs_get_node_info
f2fs: avoid down_write on nat_tree_lock during checkpoint
f2fs: compress: fix potential deadlock of compress file
f2fs: avoid EINVAL by SBI_NEED_FSCK when pinning a file
f2fs: add gc_urgent_high_remaining sysfs node
f2fs: fix to do sanity check in is_alive()
f2fs: fix to avoid panic in is_alive() if metadata is inconsistent
f2fs: fix to do sanity check on inode type during garbage collection
f2fs: avoid duplicate call of mark_inode_dirty
f2fs: show number of pending discard commands
f2fs: support POSIX_FADV_DONTNEED drop compressed page cache
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Add new kconfig target 'make mod2noconfig', which will be useful to
speed up the build and test iteration.
- Raise the minimum supported version of LLVM to 11.0.0
- Refactor certs/Makefile
- Change the format of include/config/auto.conf to stop double-quoting
string type CONFIG options.
- Fix ARCH=sh builds in dash
- Separate compression macros for general purposes (cmd_bzip2 etc.) and
the ones for decompressors (cmd_bzip2_with_size etc.)
- Misc Makefile cleanups
* tag 'kbuild-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (34 commits)
kbuild: add cmd_file_size
arch: decompressor: remove useless vmlinux.bin.all-y
kbuild: rename cmd_{bzip2,lzma,lzo,lz4,xzkern,zstd22}
kbuild: drop $(size_append) from cmd_zstd
sh: rename suffix-y to suffix_y
doc: kbuild: fix default in `imply` table
microblaze: use built-in function to get CPU_{MAJOR,MINOR,REV}
certs: move scripts/extract-cert to certs/
kbuild: do not quote string values in include/config/auto.conf
kbuild: do not include include/config/auto.conf from shell scripts
certs: simplify $(srctree)/ handling and remove config_filename macro
kbuild: stop using config_filename in scripts/Makefile.modsign
certs: remove misleading comments about GCC PR
certs: refactor file cleaning
certs: remove unneeded -I$(srctree) option for system_certificates.o
certs: unify duplicated cmd_extract_certs and improve the log
certs: use $< and $@ to simplify the key generation rule
kbuild: remove headers_check stub
kbuild: move headers_check.pl to usr/include/
certs: use if_changed to re-generate the key when the key type is changed
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine updates from Vinod Koul:
"A bunch of new support and few updates to drivers:
New support:
- DMA_MEMCPY_SG support is bought back as we have a user in Xilinx
driver
- Support for TI J721S2 SoC in k3-udma driver
- Support for Ingenic MDMA and BDMA in the JZ4760
- Support for Renesas r8a779f0 dmac
Updates:
- We are finally getting rid of slave_id, so this brings in the
changes across tree for that
- updates for idxd driver
- at_xdmac driver cleanup"
* tag 'dmaengine-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (60 commits)
dt-bindings: dma-controller: Split interrupt fields in example
dmaengine: pch_dma: Remove usage of the deprecated "pci-dma-compat.h" API
dmaengine: at_xdmac: Fix race over irq_status
dmaengine: at_xdmac: Remove a level of indentation in at_xdmac_tasklet()
dmaengine: at_xdmac: Fix at_xdmac_lld struct definition
dmaengine: at_xdmac: Fix lld view setting
dmaengine: at_xdmac: Remove a level of indentation in at_xdmac_advance_work()
dmaengine: at_xdmac: Fix concurrency over xfers_list
dmaengine: at_xdmac: Move the free desc to the tail of the desc list
dmaengine: at_xdmac: Fix race for the tx desc callback
dmaengine: at_xdmac: Fix concurrency over chan's completed_cookie
dmaengine: at_xdmac: Print debug message after realeasing the lock
dmaengine: at_xdmac: Start transfer for cyclic channels in issue_pending
dmaengine: at_xdmac: Don't start transactions at tx_submit level
dmaengine: idxd: deprecate token sysfs attributes for read buffers
dmaengine: idxd: change bandwidth token to read buffers
dmaengine: idxd: fix wq settings post wq disable
dmaengine: idxd: change MSIX allocation based on per wq activation
dmaengine: idxd: fix descriptor flushing locking
dmaengine: idxd: embed irq_entry in idxd_wq struct
...
|
|
Pull virtio updates from Michael Tsirkin:
"virtio,vdpa,qemu_fw_cfg: features, cleanups, and fixes.
- partial support for < MAX_ORDER - 1 granularity for virtio-mem
- driver_override for vdpa
- sysfs ABI documentation for vdpa
- multiqueue config support for mlx5 vdpa
- and misc fixes, cleanups"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (42 commits)
vdpa/mlx5: Fix tracking of current number of VQs
vdpa/mlx5: Fix is_index_valid() to refer to features
vdpa: Protect vdpa reset with cf_mutex
vdpa: Avoid taking cf_mutex lock on get status
vdpa/vdpa_sim_net: Report max device capabilities
vdpa: Use BIT_ULL for bit operations
vdpa/vdpa_sim: Configure max supported virtqueues
vdpa/mlx5: Report max device capabilities
vdpa: Support reporting max device capabilities
vdpa/mlx5: Restore cur_num_vqs in case of failure in change_num_qps()
vdpa: Add support for returning device configuration information
vdpa/mlx5: Support configuring max data virtqueue
vdpa/mlx5: Fix config_attr_mask assignment
vdpa: Allow to configure max data virtqueues
vdpa: Read device configuration only if FEATURES_OK
vdpa: Sync calls set/get config/status with cf_mutex
vdpa/mlx5: Distribute RX virtqueues in RQT object
vdpa: Provide interface to read driver features
vdpa: clean up get_config_size ret value handling
virtio_ring: mark ring unused on error
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux
Pull remoteproc updates from Bjorn Andersson:
"This introduces support for controlling the Cortex R7 co-processor in
Renesas Gen3, support for R5F clusters and C71x DSPs on TI J721S2 and
compute, audio and modem subsystems on Qualcomm SM6350.
It fixes a couple of sparse errors related to memcpy_to/fromio and
corrects the kerneldoc spelling of "Return:".
The stm32 driver no longer attempts to communicate with the remote
after the firmware has crashed"
* tag 'rproc-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux: (22 commits)
remoteproc: stm32: Improve crash recovery time
remoteproc: rcar_rproc: Remove trailing semicolon
remoteproc: rcar_rproc: Fix pm_runtime_get_sync error check
remoteproc: qcom: pas: Add SM6350 CDSP support
remoteproc: qcom: pas: Add SM6350 ADSP support
remoteproc: qcom: pas: Add SM6350 MPSS support
dt-bindings: remoteproc: qcom: pas: Add SM6350 adsp, cdsp & mpss
remoteproc: qcom: pas: Add missing power-domain "mxc" for CDSP
remoteproc: imx_rproc: correct firmware reload
remoteproc: qcom: pil_info: Don't memcpy_toio more than is provided
remoteproc: Add Renesas rcar driver
dt-bindings: remoteproc: Add Renesas R-Car
remoteproc: Fix remaining wrong return formatting in documentation
MAINTAINERS: Removing Ohad from remoteproc/rpmsg maintenance
remoteproc: ingenic: Request IRQ disabled
remoteproc: k3-r5: Extend support for R5F clusters on J721S2 SoCs
remoteproc: k3-dsp: Extend support for C71x DSPs on J721S2 SoCs
dt-bindings: remoteproc: k3-dsp: Update bindings for J721S2 SoCs
dt-bindings: remoteproc: k3-r5f: Update bindings for J721S2 SoCs
remoteproc: coredump: Correct argument 2 type for memcpy_fromio
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more ACPI updates from Rafael Wysocki:
"The most significant item here is the Platform Firmware Runtime Update
and Telemetry (PFRUT) support designed to allow certain pieces of the
platform firmware to be updated on the fly, among other things.
Also important is the e820 handling change on x86 that should work
around PCI BAR allocation issues on some systems shipping since 2019.
The rest is just a handful of assorted fixes and cleanups on top of
the ACPI material merged previously.
Specifics:
- Add support for the the Platform Firmware Runtime Update and
Telemetry (PFRUT) interface based on ACPI to allow certain pieces
of the platform firmware to be updated without restarting the
system and to provide a mechanism for collecting platform firmware
telemetry data (Chen Yu, Dan Carpenter, Yang Yingliang).
- Ignore E820 reservations covering PCI host bridge windows on
sufficiently recent x86 systems to avoid issues with allocating PCI
BARs on systems where the E820 reservations cover the entire PCI
host bridge memory window returned by the _CRS object in the
system's ACPI tables (Hans de Goede).
- Fix and clean up acpi_scan_init() (Rafael Wysocki).
- Add more sanity checking to ACPI SPCR tables parsing (Mark
Langsdorf).
- Fix up ACPI APD (AMD Soc) driver initialization (Jiasheng Jiang).
- Drop unnecessary "static" from the ACPI PCC address space handling
driver added recently (kernel test robot)"
* tag 'acpi-5.17-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: PCC: pcc_ctx can be static
ACPI: scan: Rename label in acpi_scan_init()
ACPI: scan: Simplify initialization of power and sleep buttons
ACPI: scan: Change acpi_scan_init() return value type to void
ACPI: SPCR: check if table->serial_port.access_width is too wide
ACPI: APD: Check for NULL pointer after calling devm_ioremap()
x86/PCI: Ignore E820 reservations for bridge windows on newer systems
ACPI: pfr_telemetry: Fix info leak in pfrt_log_ioctl()
ACPI: pfr_update: Fix return value check in pfru_write()
ACPI: tools: Introduce utility for firmware updates/telemetry
ACPI: Introduce Platform Firmware Runtime Telemetry driver
ACPI: Introduce Platform Firmware Runtime Update device driver
efi: Introduce EFI_FIRMWARE_MANAGEMENT_CAPSULE_HEADER and corresponding structures
|
|
Cleanup double spaces in some of the comments.
Signed-off-by: Stanislav Jakubek <stano.jakubek@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/13b3f66efd3b20f1d9bbb9eff1eca00757ac5367.1642080090.git.stano.jakubek@gmail.com
|
|
sparkfun,qwiic-joystick and st,24c256 had their comments incorrectly
swapped. Swap them to make them correct.
Signed-off-by: Stanislav Jakubek <stano.jakubek@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/7dc6ddb0b042cd243b2875e9aea81cad541d1c6b.1642080090.git.stano.jakubek@gmail.com
|
|
The vendor prefix for Wingtech [1] is used in device tree [2], but was
not documented so far. Add it to the schema to document it.
[1] http://www.wingtech.com/en
[2] arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts
Signed-off-by: Stanislav Jakubek <stano.jakubek@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220113103110.GA4488@standask-GA-A55M-S2HP
|
|
The vendor prefix for Thundercomm [1] is used in device tree [2], but
was not documented so far. Add it to the schema to document it.
[1] https://www.thundercomm.com/
[2] arch/arm64/boot/dts/qcom/sdm845-db845c.dts
Signed-off-by: Stanislav Jakubek <stano.jakubek@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220113103036.GA4456@standask-GA-A55M-S2HP
|
|
The vendor prefix for Huawei [1] is used in device trees [2][3], but was
not documented so far. Add it to the schema to document it.
[1] https://www.huawei.com/en/
[2] arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts
[3] arch/arm64/boot/dts/qcom/msm8994-angler-rev-101.dts
Signed-off-by: Stanislav Jakubek <stano.jakubek@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220113103005.GA4421@standask-GA-A55M-S2HP
|
|
The vendor prefix for F(x)tec [1] is used in device tree [2], but was
not documented so far. Add it to the schema to document it.
[1] https://www.fxtec.com/
[2] arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts
Signed-off-by: Stanislav Jakubek <stano.jakubek@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220113102926.GA4388@standask-GA-A55M-S2HP
|
|
The vendor prefix for 8devices [1] is used in device tree [2], but was
not documented so far. Add it to the schema to document it.
[1] https://www.8devices.com/
[2] arch/arm/boot/dts/qcom-ipq4018-jalapeno.dts
Signed-off-by: Stanislav Jakubek <stano.jakubek@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220113102842.GA4357@standask-GA-A55M-S2HP
|
|
Commit bcd56fe1aa97 ("power: reset: gpio-restart: increase priority
slightly") changed the default restart priority 129, but did not update
the documentation. Correct this, so the driver and documentation have
the same default value.
Signed-off-by: Sander Vanheule <sander@svanheule.net>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220110214456.67087-1-sander@svanheule.net
|
|
The sentence looks ambiguous, rephrase it by adding ", there".
Signed-off-by: Huichun Feng <foxhoundsk.tw@gmail.com>
Signed-off-by: Ching-Chun (Jim) Huang <jserv@ccns.ncku.edu.tw>
Signed-off-by: Chun-Hung Tseng <henrybear327@gmail.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Link: https://lore.kernel.org/r/20220111052000.2675944-1-foxhoundsk.tw@gmail.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Signed-off-by: Wang Cheng <wanngchenng@gmail.com>
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20220115125236.34886-1-wanngchenng@gmail.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Merge support for the Platform Firmware Runtime Update and Telemetry
interface based on ACPI.
The interface provided here allows updating certain pieces of the
platform firmware without restarting the system and collecting
platform firmware telemetry data.
This also includes a utility for accesing the new interface from user
space.
* acpi-pfrut:
ACPI: pfr_telemetry: Fix info leak in pfrt_log_ioctl()
ACPI: pfr_update: Fix return value check in pfru_write()
ACPI: tools: Introduce utility for firmware updates/telemetry
ACPI: Introduce Platform Firmware Runtime Telemetry driver
ACPI: Introduce Platform Firmware Runtime Update device driver
efi: Introduce EFI_FIRMWARE_MANAGEMENT_CAPSULE_HEADER and corresponding structures
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
"Updates to Goodix touchscreen driver (addition of pen support) and
Silead touchscreen driver (also addition of pen support and parsing of
embedded firmware to determine screen size), along with assorted fixes
for other drivers"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: ti_am335x_tsc - fix a typo in a comment
Input: zinitix - add compatible for bt532
Input: zinitix - handle proper supply names
dt-bindings: input/ts/zinitix: Convert to YAML, fix and extend
Input: axp20x-pek - revert "always register interrupt handlers" change
Input: gpio-keys - avoid clearing twice some memory
Input: byd - fix typo in a comment
Input: ucb1400_ts - remove redundant variable penup
Input: ti_am335x_tsc - lower the X and Y sampling time
Input: ti_am335x_tsc - fix STEPCONFIG setup for Z2
Input: ti_am335x_tsc - set ADCREFM for X configuration
Input: silead - add pen support
Input: silead - add support for EFI-embedded fw using different min/max coordinates
Input: goodix - 2 small fixes for pen support
Input: goodix - improve gpiod_get() error logging
Input: goodix - add pen support
Input: ff-core - correct magnitude setting for rumble compatibility
Input: palmas-pwrbutton - make a couple of arrays static const
Input: wacom_i2c - clean up the query device fields
Input: palmas-pwrbutton - use bitfield helpers
|
|
git://www.linux-watchdog.org/linux-watchdog
Pull watchdog updates from Wim Van Sebroeck:
- New device support:
- Watchdog Timer driver for RZ/G2L
- Realtek Otto watchdog timer
- Apple SoC watchdog driver
- Fintek F81966
- Remove BCM63XX_WDT after support for this SoC was added to
BCM7038_WDT
- Improvements of the BCM7038_WDT and s3c2410_wdt code
- Several other fixes and improvements
* tag 'linux-watchdog-5.17-rc1' of git://www.linux-watchdog.org/linux-watchdog: (38 commits)
watchdog: msc313e: Check if the WDT was running at boot
watchdog: Add Apple SoC watchdog driver
dt-bindings: watchdog: Add SM6350 and SM8250 compatible
watchdog: s3c2410: Fix getting the optional clock
watchdog: s3c2410: Use platform_get_irq() to get the interrupt
dt-bindings: watchdog: atmel: Add missing 'interrupts' property
watchdog: mtk_wdt: use platform_get_irq_optional
watchdog: Add Watchdog Timer driver for RZ/G2L
dt-bindings: watchdog: renesas,wdt: Add support for RZ/G2L
watchdog: da9063: Add hard dependency on I2C
watchdog: Add Realtek Otto watchdog timer
dt-bindings: watchdog: Realtek Otto WDT binding
watchdog: s3c2410: Add Exynos850 support
watchdog: da9063: use atomic safe i2c transfer in reset handler
watchdog: davinci: Use div64_ul instead of do_div
watchdog: Remove BCM63XX_WDT
MIPS: BCM63XX: Provide platform data to watchdog device
watchdog: bcm7038_wdt: Add platform device id for bcm63xx-wdt
watchdog: Allow building BCM7038_WDT for BCM63XX
watchdog: bcm7038_wdt: Support platform data configuration
...
|
|
Pull kvm updates from Paolo Bonzini:
"RISCV:
- Use common KVM implementation of MMU memory caches
- SBI v0.2 support for Guest
- Initial KVM selftests support
- Fix to avoid spurious virtual interrupts after clearing hideleg CSR
- Update email address for Anup and Atish
ARM:
- Simplification of the 'vcpu first run' by integrating it into KVM's
'pid change' flow
- Refactoring of the FP and SVE state tracking, also leading to a
simpler state and less shared data between EL1 and EL2 in the nVHE
case
- Tidy up the header file usage for the nvhe hyp object
- New HYP unsharing mechanism, finally allowing pages to be unmapped
from the Stage-1 EL2 page-tables
- Various pKVM cleanups around refcounting and sharing
- A couple of vgic fixes for bugs that would trigger once the vcpu
xarray rework is merged, but not sooner
- Add minimal support for ARMv8.7's PMU extension
- Rework kvm_pgtable initialisation ahead of the NV work
- New selftest for IRQ injection
- Teach selftests about the lack of default IPA space and page sizes
- Expand sysreg selftest to deal with Pointer Authentication
- The usual bunch of cleanups and doc update
s390:
- fix sigp sense/start/stop/inconsistency
- cleanups
x86:
- Clean up some function prototypes more
- improved gfn_to_pfn_cache with proper invalidation, used by Xen
emulation
- add KVM_IRQ_ROUTING_XEN_EVTCHN and event channel delivery
- completely remove potential TOC/TOU races in nested SVM consistency
checks
- update some PMCs on emulated instructions
- Intel AMX support (joint work between Thomas and Intel)
- large MMU cleanups
- module parameter to disable PMU virtualization
- cleanup register cache
- first part of halt handling cleanups
- Hyper-V enlightened MSR bitmap support for nested hypervisors
Generic:
- clean up Makefiles
- introduce CONFIG_HAVE_KVM_DIRTY_RING
- optimize memslot lookup using a tree
- optimize vCPU array usage by converting to xarray"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (268 commits)
x86/fpu: Fix inline prefix warnings
selftest: kvm: Add amx selftest
selftest: kvm: Move struct kvm_x86_state to header
selftest: kvm: Reorder vcpu_load_state steps for AMX
kvm: x86: Disable interception for IA32_XFD on demand
x86/fpu: Provide fpu_sync_guest_vmexit_xfd_state()
kvm: selftests: Add support for KVM_CAP_XSAVE2
kvm: x86: Add support for getting/setting expanded xstate buffer
x86/fpu: Add uabi_size to guest_fpu
kvm: x86: Add CPUID support for Intel AMX
kvm: x86: Add XCR0 support for Intel AMX
kvm: x86: Disable RDMSR interception of IA32_XFD_ERR
kvm: x86: Emulate IA32_XFD_ERR for guest
kvm: x86: Intercept #NM for saving IA32_XFD_ERR
x86/fpu: Prepare xfd_err in struct fpu_guest
kvm: x86: Add emulation for IA32_XFD
x86/fpu: Provide fpu_update_guest_xfd() for IA32_XFD emulation
kvm: x86: Enable dynamic xfeatures at KVM_SET_CPUID2
x86/fpu: Provide fpu_enable_guest_xfd_features() for KVM
x86/fpu: Add guest support to xfd_enable_feature()
...
|
