summaryrefslogtreecommitdiff
path: root/Documentation
AgeCommit message (Collapse)Author
2017-09-18dt-bindings: net: renesas-ravb: Add support for R8A77995 RAVBYoshihiro Shimoda
Add a new compatible string for the R8A77995 (R-Car D3) RAVB. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-18ravb: document R8A77970 bindingsSergei Shtylyov
R-Car V3M (R8A77970) SoC also has the R-Car gen3 compatible EtherAVB device, so document the SoC specific bindings. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Acked-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: 1) Fix hotplug deadlock in hv_netvsc, from Stephen Hemminger. 2) Fix double-free in rmnet driver, from Dan Carpenter. 3) INET connection socket layer can double put request sockets, fix from Eric Dumazet. 4) Don't match collect metadata-mode tunnels if the device is down, from Haishuang Yan. 5) Do not perform TSO6/GSO on ipv6 packets with extensions headers in be2net driver, from Suresh Reddy. 6) Fix scaling error in gen_estimator, from Eric Dumazet. 7) Fix 64-bit statistics deadlock in systemport driver, from Florian Fainelli. 8) Fix use-after-free in sctp_sock_dump, from Xin Long. 9) Reject invalid BPF_END instructions in verifier, from Edward Cree. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (43 commits) mlxsw: spectrum_router: Only handle IPv4 and IPv6 events Documentation: link in networking docs tcp: fix data delivery rate bpf/verifier: reject BPF_ALU64|BPF_END sctp: do not mark sk dumped when inet_sctp_diag_fill returns err sctp: fix an use-after-free issue in sctp_sock_dump netvsc: increase default receive buffer size tcp: update skb->skb_mstamp more carefully net: ipv4: fix l3slave check for index returned in IP_PKTINFO net: smsc911x: Quieten netif during suspend net: systemport: Fix 64-bit stats deadlock net: vrf: avoid gcc-4.6 warning qed: remove unnecessary call to memset tg3: clean up redundant initialization of tnapi tls: make tls_sw_free_resources static sctp: potential read out of bounds in sctp_ulpevent_type_enabled() MAINTAINERS: review Renesas DT bindings as well net_sched: gen_estimator: fix scaling error in bytes/packets samples nfp: wait for the NSP resource to appear on boot nfp: wait for board state before talking to the NSP ...
2017-09-16Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull more input updates from Dmitry Torokhov: "A second round of updates for the input subsystem: - a new driver for PWM-controlled vibrators - ucb1400 touchscreen driver had completely busted suspend/resume handling - we now handle "home" button found on some devices with Goodix touchscreens - assorted other fixups" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: i8042 - add Gigabyte P57 to the keyboard reset table Input: xpad - validate USB endpoint type during probe Input: ucb1400_ts - fix suspend and resume handling Input: edt-ft5x06 - fix access to non-existing register Input: elantech - make arrays debounce_packet static, reduces object code size Input: surface3_spi - make const array header static, reduces object code size Input: goodix - add support for capacitive home button Input: add a driver for PWM controllable vibrators Input: adi - make array seq static, reduces object code size
2017-09-16Documentation: link in networking docsPavel Machek
Fix link in filter.txt. Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-15Merge branch '4.14-features' of ↵Linus Torvalds
git://git.linux-mips.org/pub/scm/ralf/upstream-linus Pull MIPS updates from Ralf Baechle: "This is the main pull request for 4.14 for MIPS; below a summary of the non-merge commits: CM: - Rename mips_cm_base to mips_gcr_base - Specify register size when generating accessors - Use BIT/GENMASK for register fields, order & drop shifts - Add cluster & block args to mips_cm_lock_other() CPC: - Use common CPS accessor generation macros - Use BIT/GENMASK for register fields, order & drop shifts - Introduce register modify (set/clear/change) accessors - Use change_*, set_* & clear_* where appropriate - Add CM/CPC 3.5 register definitions - Use GlobalNumber macros rather than magic numbers - Have asm/mips-cps.h include CM & CPC headers - Cluster support for topology functions - Detect CPUs in secondary clusters CPS: - Read GIC_VL_IDENT directly, not via irqchip driver DMA: - Consolidate coherent and non-coherent dma_alloc code - Don't use dma_cache_sync to implement fd_cacheflush FPU emulation / FP assist code: - Another series of 14 commits fixing corner cases such as NaN propgagation and other special input values. - Zero bits 32-63 of the result for a CLASS.D instruction. - Enhanced statics via debugfs - Do not use bools for arithmetic. GCC 7.1 moans about this. - Correct user fault_addr type Generic MIPS: - Enhancement of stack backtraces - Cleanup from non-existing options - Handle non word sized instructions when examining frame - Fix detection and decoding of ADDIUSP instruction - Fix decoding of SWSP16 instruction - Refactor handling of stack pointer in get_frame_info - Remove unreachable code from force_fcr31_sig() - Convert to using %pOF instead of full_name - Remove the R6000 support. - Move FP code from *_switch.S to *_fpu.S - Remove unused ST_OFF from r2300_switch.S - Allow platform to specify multiple its.S files - Add #includes to various files to ensure code builds reliable and without warning.. - Remove __invalidate_kernel_vmap_range - Remove plat_timer_setup - Declare various variables & functions static - Abstract CPU core & VP(E) ID access through accessor functions - Store core & VP IDs in GlobalNumber-style variable - Unify checks for sibling CPUs - Add CPU cluster number accessors - Prevent direct use of generic_defconfig - Make CONFIG_MIPS_MT_SMP default y - Add __ioread64_copy - Remove unnecessary inclusions of linux/irqchip/mips-gic.h GIC: - Introduce asm/mips-gic.h with accessor functions - Use new GIC accessor functions in mips-gic-timer - Remove counter access functions from irq-mips-gic.c - Remove gic_read_local_vp_id() from irq-mips-gic.c - Simplify shared interrupt pending/mask reads in irq-mips-gic.c - Simplify gic_local_irq_domain_map() in irq-mips-gic.c - Drop gic_(re)set_mask() functions in irq-mips-gic.c - Remove gic_set_polarity(), gic_set_trigger(), gic_set_dual_edge(), gic_map_to_pin() and gic_map_to_vpe() from irq-mips-gic.c. - Convert remaining shared reg access, local int mask access and remaining local reg access to new accessors - Move GIC_LOCAL_INT_* to asm/mips-gic.h - Remove GIC_CPU_INT* macros from irq-mips-gic.c - Move various definitions to the driver - Remove gic_get_usm_range() - Remove __gic_irq_dispatch() forward declaration - Remove gic_init() - Use mips_gic_present() in place of gic_present and remove gic_present - Move gic_get_c0_*_int() to asm/mips-gic.h - Remove linux/irqchip/mips-gic.h - Inline __gic_init() - Inline gic_basic_init() - Make pcpu_masks a per-cpu variable - Use pcpu_masks to avoid reading GIC_SH_MASK* - Clean up mti, reserved-cpu-vectors handling - Use cpumask_first_and() in gic_set_affinity() - Let the core set struct irq_common_data affinity microMIPS: - Fix microMIPS stack unwinding on big endian systems MIPS-GIC: - SYNC after enabling GIC region NUMA: - Remove the unused parent_node() macro R6: - Constify r2_decoder_tables - Add accessor & bit definitions for GlobalNumber SMP: - Constify smp ops - Allow boot_secondary SMP op to return errors VDSO: - Drop gic_get_usm_range() usage - Avoid use of linux/irqchip/mips-gic.h Platform changes: Alchemy: - Add devboard machine type to cpuinfo - update cpu feature overrides - Threaded carddetect irqs for devboards AR7: - allow NULL clock for clk_get_rate BCM63xx: - Fix ENETDMA_6345_MAXBURST_REG offset - Allow NULL clock for clk_get_rate CI20: - Enable GPIO and RTC drivers in defconfig - Add ethernet and fixed-regulator nodes to DTS Generic platform: - Move Boston and NI 169445 FIT image source to their own files - Include asm/bootinfo.h for plat_fdt_relocated() - Include asm/time.h for get_c0_*_int() - Include asm/bootinfo.h for plat_fdt_relocated() - Include asm/time.h for get_c0_*_int() - Allow filtering enabled boards by requirements - Don't explicitly disable CONFIG_USB_SUPPORT - Bump default NR_CPUS to 16 JZ4700: - Probe the jz4740-rtc driver from devicetree Lantiq: - Drop check of boot select from the spi-falcon driver. - Drop check of boot select from the lantiq-flash MTD driver. - Access boot cause register in the watchdog driver through regmap - Add device tree binding documentation for the watchdog driver - Add docs for the RCU DT bindings. - Convert the fpi bus driver to a platform_driver - Remove ltq_reset_cause() and ltq_boot_select( - Switch to a proper reset driver - Switch to a new drivers/soc GPHY driver - Add an USB PHY driver for the Lantiq SoCs using the RCU module - Use of_platform_default_populate instead of __dt_register_buses - Enable MFD_SYSCON to be able to use it for the RCU MFD - Replace ltq_boot_select() with dummy implementation. Loongson 2F: - Allow NULL clock for clk_get_rate Malta: - Use new GIC accessor functions NI 169445: - Add support for NI 169445 board. - Only include in 32r2el kernels Octeon: - Add support for watchdog of 78XX SOCs. - Add support for watchdog of CN68XX SOCs. - Expose support for mips32r1, mips32r2 and mips64r1 - Enable more drivers in config file - Add support for accessing the boot vector. - Remove old boot vector code from watchdog driver - Define watchdog registers for 70xx, 73xx, 78xx, F75xx. - Make CSR functions node aware. - Allow access to CIU3 IRQ domains. - Misc cleanups in the watchdog driver Omega2+: - New board, add support and defconfig Pistachio: - Enable Root FS on NFS in defconfig Ralink: - Add Mediatek MT7628A SoC - Allow NULL clock for clk_get_rate - Explicitly request exclusive reset control in the pci-mt7620 PCI driver. SEAD3: - Only include in 32 bit kernels by default VoCore: - Add VoCore as a vendor t0 dt-bindings - Add defconfig file" * '4.14-features' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (167 commits) MIPS: Refactor handling of stack pointer in get_frame_info MIPS: Stacktrace: Fix microMIPS stack unwinding on big endian systems MIPS: microMIPS: Fix decoding of swsp16 instruction MIPS: microMIPS: Fix decoding of addiusp instruction MIPS: microMIPS: Fix detection of addiusp instruction MIPS: Handle non word sized instructions when examining frame MIPS: ralink: allow NULL clock for clk_get_rate MIPS: Loongson 2F: allow NULL clock for clk_get_rate MIPS: BCM63XX: allow NULL clock for clk_get_rate MIPS: AR7: allow NULL clock for clk_get_rate MIPS: BCM63XX: fix ENETDMA_6345_MAXBURST_REG offset mips: Save all registers when saving the frame MIPS: Add DWARF unwinding to assembly MIPS: Make SAVE_SOME more standard MIPS: Fix issues in backtraces MIPS: jz4780: DTS: Probe the jz4740-rtc driver from devicetree MIPS: Ci20: Enable RTC driver watchdog: octeon-wdt: Add support for 78XX SOCs. watchdog: octeon-wdt: Add support for cn68XX SOCs. watchdog: octeon-wdt: File cleaning. ...
2017-09-15Merge branch 'i2c/for-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull more i2c updates from Wolfram Sang: "I2C has two more new drivers: Altera FPGA and STM32F7" * 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: i2c-stm32f7: add driver i2c: i2c-stm32f4: use generic definition of speed enum dt-bindings: i2c-stm32: Document the STM32F7 I2C bindings i2c: altera: Add Altera I2C Controller driver dt-bindings: i2c: Add Altera I2C Controller
2017-09-15Merge tag 'for-linus-4.14-ofs2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux Pull orangefs updates from Mike Marshall: "Some cleanups and a big bug fix for ACLs. When I was reviewing Jan Kara's ACL patch, I realized that Orangefs ACL code was busted, not just in the kernel module, but in the server as well. I've been working on the code in the server mostly, but here's one kernel patch, there will be more" * tag 'for-linus-4.14-ofs2' of git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux: orangefs: Adjust three checks for null pointers orangefs: Use kcalloc() in orangefs_prepare_cdm_array() orangefs: Delete error messages for a failed memory allocation in five functions orangefs: constify xattr_handler structure orangefs: don't call filemap_write_and_wait from fsync orangefs: off by ones in xattr size checks orangefs: documentation clean up orangefs: react properly to posix_acl_update_mode's aftermath. orangefs: Don't clear SGID when inheriting ACLs
2017-09-14Merge branch 'work.mount' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull mount flag updates from Al Viro: "Another chunk of fmount preparations from dhowells; only trivial conflicts for that part. It separates MS_... bits (very grotty mount(2) ABI) from the struct super_block ->s_flags (kernel-internal, only a small subset of MS_... stuff). This does *not* convert the filesystems to new constants; only the infrastructure is done here. The next step in that series is where the conflicts would be; that's the conversion of filesystems. It's purely mechanical and it's better done after the merge, so if you could run something like list=$(for i in MS_RDONLY MS_NOSUID MS_NODEV MS_NOEXEC MS_SYNCHRONOUS MS_MANDLOCK MS_DIRSYNC MS_NOATIME MS_NODIRATIME MS_SILENT MS_POSIXACL MS_KERNMOUNT MS_I_VERSION MS_LAZYTIME; do git grep -l $i fs drivers/staging/lustre drivers/mtd ipc mm include/linux; done|sort|uniq|grep -v '^fs/namespace.c$') sed -i -e 's/\<MS_RDONLY\>/SB_RDONLY/g' \ -e 's/\<MS_NOSUID\>/SB_NOSUID/g' \ -e 's/\<MS_NODEV\>/SB_NODEV/g' \ -e 's/\<MS_NOEXEC\>/SB_NOEXEC/g' \ -e 's/\<MS_SYNCHRONOUS\>/SB_SYNCHRONOUS/g' \ -e 's/\<MS_MANDLOCK\>/SB_MANDLOCK/g' \ -e 's/\<MS_DIRSYNC\>/SB_DIRSYNC/g' \ -e 's/\<MS_NOATIME\>/SB_NOATIME/g' \ -e 's/\<MS_NODIRATIME\>/SB_NODIRATIME/g' \ -e 's/\<MS_SILENT\>/SB_SILENT/g' \ -e 's/\<MS_POSIXACL\>/SB_POSIXACL/g' \ -e 's/\<MS_KERNMOUNT\>/SB_KERNMOUNT/g' \ -e 's/\<MS_I_VERSION\>/SB_I_VERSION/g' \ -e 's/\<MS_LAZYTIME\>/SB_LAZYTIME/g' \ $list and commit it with something along the lines of 'convert filesystems away from use of MS_... constants' as commit message, it would save a quite a bit of headache next cycle" * 'work.mount' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: VFS: Differentiate mount flags (MS_*) from internal superblock flags VFS: Convert sb->s_flags & MS_RDONLY to sb_rdonly(sb) vfs: Add sb_rdonly(sb) to query the MS_RDONLY flag on s_flags
2017-09-14Merge tag 'fbdev-v4.14' of git://github.com/bzolnier/linuxLinus Torvalds
Pull fbdev updates from Bartlomiej Zolnierkiewicz: - make fbcon a built-time depency for fbdev (fbcon was tristate option before, now it is a bool) - this is a first step in preparations for making console_lock usage saner (currently it acts like the BKL for all things fbdev/fbcon) (Daniel Vetter) - add fbcon=margin:<color> command line option to select the fbcon margin color (David Lechner) - add DMI quirk table for x86 systems which need fbcon rotation (devices like Asus T100HA, GPD Pocket, the GPD win and the I.T.Works TW891) (Hans de Goede) - fix 1bpp logo support for unusual width (needed by LEGO MINDSTORMS EV3) (David Lechner) - enable Xilinx FB driver for ARM ZynqMP platform (Michal Simek) - fix use after free in the error path of udlfb driver (Anton Vasilyev) - fix error return code handling in pxa3xx_gcu driver (Gustavo A. R. Silva) - fix bootparams.screeninfo arguments checking in vgacon (Jan H. Schönherr) - do not leak uninitialized padding in clk to userspace in the debug code of atyfb driver (Vladis Dronov) - fix compiler warnings in fbcon code and matroxfb driver (Arnd Bergmann) - convert fbdev susbsytem to using %pOF instead of full_name (Rob Herring) - structures constifications (Arvind Yadav, Bhumika Goyal, Gustavo A. R. Silva, Julia Lawall) - misc cleanups (Gustavo A. R. Silva, Hyun Kwon, Julia Lawall, Kuninori Morimoto, Lynn Lei) * tag 'fbdev-v4.14' of git://github.com/bzolnier/linux: (75 commits) video/console: Update BIOS dates list for GPD win console rotation DMI quirk video/console: Add rotated LCD-panel DMI quirk for the VIOS LTH17 video: fbdev: sis: fix duplicated code for different branches video: fbdev: make fb_var_screeninfo const video: fbdev: aty: do not leak uninitialized padding in clk to userspace vgacon: Prevent faulty bootparams.screeninfo from causing harm video: fbdev: make fb_videomode const video/console: Add new BIOS date for GPD pocket to dmi quirk table fbcon: remove restriction on margin color video: ARM CLCD: constify amba_id video: fm2fb: constify zorro_device_id video: fbdev: annotate fb_fix_screeninfo with const and __initconst omapfb: constify omap_video_timings structures video: fbdev: udlfb: Fix use after free on dlfb_usb_probe error path fbdev: i810: make fb_ops const fbdev: matrox: make fb_ops const video: fbdev: pxa3xx_gcu: fix error return code in pxa3xx_gcu_probe() video: fbdev: Enable Xilinx FB for ZynqMP video: fbdev: Fix multiple style issues in xilinxfb video: fbdev: udlfb: constify usb_device_id. ...
2017-09-14Merge git://www.linux-watchdog.org/linux-watchdogLinus Torvalds
Pull watchdog updates from Wim Van Sebroeck: - add support for the watchdog on Meson8 and Meson8m2 - add support for MediaTek MT7623 and MT7622 SoC - add support for the r8a77995 wdt - explicitly request exclusive reset control for asm9260_wdt, zx2967_wdt, rt2880_wdt and mt7621_wdt - improvements to asm9260_wdt, aspeed_wdt, renesas_wdt and cadence_wdt - add support for reading freq via CCF + suspend/resume support for of_xilinx_wdt - constify watchdog_ops and various device-id structures - revert of commit 1fccb73011ea ("iTCO_wdt: all versions count down twice") (Bug 196509) * git://www.linux-watchdog.org/linux-watchdog: (40 commits) watchdog: mei_wdt: constify mei_cl_device_id watchdog: sp805: constify amba_id watchdog: ziirave: constify i2c_device_id watchdog: sc1200: constify pnp_device_id dt-bindings: watchdog: renesas-wdt: Add support for the r8a77995 wdt watchdog: renesas_wdt: update copyright dates watchdog: renesas_wdt: make 'clk' a variable local to probe() watchdog: renesas_wdt: consistently use RuntimePM for clock management watchdog: aspeed: Support configuration of external signal properties dt-bindings: watchdog: aspeed: External reset signal properties drivers/watchdog: Add optional ASPEED device tree properties drivers/watchdog: ASPEED reference dev tree properties for config watchdog: da9063_wdt: Simplify by removing unneeded struct... watchdog: bcm7038: Check the return value from clk_prepare_enable() watchdog: qcom: Check for platform_get_resource() failure watchdog: of_xilinx_wdt: Add suspend/resume support watchdog: of_xilinx_wdt: Add support for reading freq via CCF dt-bindings: watchdog: mediatek: add support for MediaTek MT7623 and MT7622 SoC watchdog: max77620_wdt: constify platform_device_id watchdog: pcwd_usb: constify usb_device_id ...
2017-09-14orangefs: documentation clean upMike Marshall
Signed-off-by: Mike Marshall <hubcap@omnibond.com>
2017-09-14dt-bindings: i2c-stm32: Document the STM32F7 I2C bindingsPierre-Yves MORDRET
This patch adds the documentation of device tree bindings for STM32F7 I2C Signed-off-by: M'boumba Cedric Madianga <cedric.madianga@gmail.com> Signed-off-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-09-13dt-bindings: i2c: Add Altera I2C ControllerThor Thayer
Add the documentation to support the Altera synthesizable logic I2C Controller in FPGA. Signed-off-by: Thor Thayer <thor.thayer@linux.intel.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-09-13Merge tag 'clk-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "The diff is dominated by the Allwinner A10/A20 SoCs getting converted to the sunxi-ng framework. Otherwise, the heavy hitters are various drivers for SoCs like AT91, Amlogic, Renesas, and Rockchip. There are some other new clk drivers in here too but overall this is just a bunch of clk drivers for various different pieces of hardware and a collection of non-critical fixes for clk drivers. New Drivers: - Allwinner R40 SoCs - Renesas R-Car Gen3 USB 2.0 clock selector PHY - Atmel AT91 audio PLL - Uniphier PXs3 SoCs - ARC HSDK Board PLLs - AXS10X Board PLLs - STMicroelectronics STM32H743 SoCs Removed Drivers: - Non-compiling mb86s7x support Updates: - Allwinner A10/A20 SoCs converted to sunxi-ng framework - Allwinner H3 CPU clk fixes - Renesas R-Car D3 SoC - Renesas V2H and M3-W modules - Samsung Exynos5420/5422/5800 audio fixes - Rockchip fractional clk approximation fixes - Rockchip rk3126 SoC support within the rk3128 driver - Amlogic gxbb CEC32 and sd_emmc clks - Amlogic meson8b reset controller support - IDT VersaClock 5P49V5925/5P49V6901 support - Qualcomm MSM8996 SMMU clks - Various 'const' applications for struct clk_ops - si5351 PLL reset bugfix - Uniphier audio on LD11/LD20 and ethernet support on LD11/LD20/Pro4/PXs2 - Assorted Tegra clk driver fixes" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (120 commits) clk: si5351: fix PLL reset ASoC: atmel-classd: remove aclk clock ASoC: atmel-classd: remove aclk clock from DT binding clk: at91: clk-generated: make gclk determine audio_pll rate clk: at91: clk-generated: create function to find best_diff clk: at91: add audio pll clock drivers dt-bindings: clk: at91: add audio plls to the compatible list clk: at91: clk-generated: remove useless divisor loop clk: mb86s7x: Drop non-building driver clk: ti: check for null return in strrchr to avoid null dereferencing clk: Don't write error code into divider register clk: uniphier: add video input subsystem clock clk: uniphier: add audio system clock clk: stm32h7: Add stm32h743 clock driver clk: gate: expose clk_gate_ops::is_enabled clk: nxp: clk-lpc32xx: rename clk_gate_is_enabled() clk: uniphier: add PXs3 clock data clk: hi6220: change watchdog clock source clk: Kconfig: Name RK805 in Kconfig for COMMON_CLK_RK808 clk: cs2000: Add cs2000_set_saved_rate ...
2017-09-13Merge tag 'rtc-4.14' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux Pull RTC updates from Alexandre Belloni: "Subsystem: - remove .open() and .release() RTC ops - constify i2c_device_id New driver: - Realtek RTD1295 - Android emulator (goldfish) RTC Drivers: - ds1307: Beginning of a huge cleanup - s35390a: handle invalid RTC time - sun6i: external oscillator gate support" * tag 'rtc-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (40 commits) rtc: ds1307: use octal permissions rtc: ds1307: fix braces rtc: ds1307: fix alignments and blank lines rtc: ds1307: use BIT rtc: ds1307: use u32 rtc: ds1307: use sizeof rtc: ds1307: remove regs member rtc: Add Realtek RTD1295 dt-bindings: rtc: Add Realtek RTD1295 rtc: sun6i: Add support for the external oscillator gate rtc: goldfish: Add RTC driver for Android emulator dt-bindings: Add device tree binding for Goldfish RTC driver rtc: ds1307: add basic support for ds1341 chip rtc: ds1307: remove member nvram_offset from struct ds1307 rtc: ds1307: factor out offset to struct chip_desc rtc: ds1307: factor out rtc_ops to struct chip_desc rtc: ds1307: factor out irq_handler to struct chip_desc rtc: ds1307: improve irq setup rtc: ds1307: constify struct chip_desc variables rtc: ds1307: improve trickle charger initialization ...
2017-09-13Merge tag 'docs-4.14' of git://git.lwn.net/linuxLinus Torvalds
Pull documentation fixes from Jonathan Corbet: "A cleanup from Mauro that needed to wait for the media pull, plus a handful of other fixes that wandered in" * tag 'docs-4.14' of git://git.lwn.net/linux: kokr/memory-barriers.txt: Apply atomic_t.txt change kokr/doc: Update memory-barriers.txt for read-to-write dependencies docs-rst: don't require adjustbox anymore docs-rst: conf.py: only setup notice box colors if Sphinx < 1.6 docs-rst: conf.py: remove lscape from LaTeX preamble
2017-09-13Merge branch 'overlayfs-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs Pull overlayfs updates from Miklos Szeredi: "This fixes d_ino correctness in readdir, which brings overlayfs on par with normal filesystems regarding inode number semantics, as long as all layers are on the same filesystem. There are also some bug fixes, one in particular (random ioctl's shouldn't be able to modify lower layers) that touches some vfs code, but of course no-op for non-overlay fs" * 'overlayfs-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs: ovl: fix false positive ESTALE on lookup ovl: don't allow writing ioctl on lower layer ovl: fix relatime for directories vfs: add flags to d_real() ovl: cleanup d_real for negative ovl: constant d_ino for non-merge dirs ovl: constant d_ino across copy up ovl: fix readdir error value ovl: check snprintf return
2017-09-12Merge tag 'f2fs-for-4.14' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs Pull f2fs updates from Jaegeuk Kim: "In this round, we've mostly tuned f2fs to provide better user experience for Android. Especially, we've worked on atomic write feature again with SQLite community in order to support it officially. And we added or modified several facilities to analyze and enhance IO behaviors. Major changes include: - add app/fs io stat - add inode checksum feature - support project/journalled quota - enhance atomic write with new ioctl() which exposes feature set - enhance background gc/discard/fstrim flows with new gc_urgent mode - add F2FS_IOC_FS{GET,SET}XATTR - fix some quota flows" * tag 'f2fs-for-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (63 commits) f2fs: hurry up to issue discard after io interruption f2fs: fix to show correct discard_granularity in sysfs f2fs: detect dirty inode in evict_inode f2fs: clear radix tree dirty tag of pages whose dirty flag is cleared f2fs: speed up gc_urgent mode with SSR f2fs: better to wait for fstrim completion f2fs: avoid race in between read xattr & write xattr f2fs: make get_lock_data_page to handle encrypted inode f2fs: use generic terms used for encrypted block management f2fs: introduce f2fs_encrypted_file for clean-up Revert "f2fs: add a new function get_ssr_cost" f2fs: constify super_operations f2fs: fix to wake up all sleeping flusher f2fs: avoid race in between atomic_read & atomic_inc f2fs: remove unneeded parameter of change_curseg f2fs: update i_flags correctly f2fs: don't check inode's checksum if it was dirtied or writebacked f2fs: don't need to update inode checksum for recovery f2fs: trigger fdatasync for non-atomic_write file f2fs: fix to avoid race in between aio and gc ...
2017-09-12Merge tag 'dma-mapping-4.14' of git://git.infradead.org/users/hch/dma-mappingLinus Torvalds
Pull dma-mapping updates from Christoph Hellwig: - removal of the old dma_alloc_noncoherent interface - remove unused flags to dma_declare_coherent_memory - restrict OF DMA configuration to specific physical busses - use the iommu mailing list for dma-mapping questions and patches * tag 'dma-mapping-4.14' of git://git.infradead.org/users/hch/dma-mapping: dma-coherent: fix dma_declare_coherent_memory() logic error ARM: imx: mx31moboard: Remove unused 'dma' variable dma-coherent: remove an unused variable MAINTAINERS: use the iommu list for the dma-mapping subsystem dma-coherent: remove the DMA_MEMORY_MAP and DMA_MEMORY_IO flags dma-coherent: remove the DMA_MEMORY_INCLUDES_CHILDREN flag of: restrict DMA configuration dma-mapping: remove dma_alloc_noncoherent and dma_free_noncoherent i825xx: switch to switch to dma_alloc_attrs au1000_eth: switch to dma_alloc_attrs sgiseeq: switch to dma_alloc_attrs dma-mapping: reduce dma_mapping_error inline bloat
2017-09-12Merge tag 'selinux-pr-20170831' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux Pull selinux updates from Paul Moore: "A relatively quiet period for SELinux, 11 patches with only two/three having any substantive changes. These noteworthy changes include another tweak to the NNP/nosuid handling, per-file labeling for cgroups, and an object class fix for AF_UNIX/SOCK_RAW sockets; the rest of the changes are minor tweaks or administrative updates (Stephen's email update explains the file explosion in the diffstat). Everything passes the selinux-testsuite" [ Also a couple of small patches from the security tree from Tetsuo Handa for Tomoyo and LSM cleanup. The separation of security policy updates wasn't all that clean - Linus ] * tag 'selinux-pr-20170831' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux: selinux: constify nf_hook_ops selinux: allow per-file labeling for cgroupfs lsm_audit: update my email address selinux: update my email address MAINTAINERS: update the NetLabel and Labeled Networking information selinux: use GFP_NOWAIT in the AVC kmem_caches selinux: Generalize support for NNP/nosuid SELinux domain transitions selinux: genheaders should fail if too many permissions are defined selinux: update the selinux info in MAINTAINERS credits: update Paul Moore's info selinux: Assign proper class to PF_UNIX/SOCK_RAW sockets tomoyo: Update URLs in Documentation/admin-guide/LSM/tomoyo.rst LSM: Remove security_task_create() hook.
2017-09-11Merge branch 'next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux Pull thermal updates from Zhang Rui: - fix resources release in error paths when registering thermal zone. (Christophe Jaillet) - introduce a new thermal driver for on-chip PVT (Process, Voltage and Temperature) monitoring unit implemented on UniPhier SoCs. This driver supports temperature monitoring and alert function. (Kunihiko Hayashi) - Add support for mt2712 chip in the mtk_thermal driver. (Louis Yu) - Add support for RK3328 SOC in rockchip_thermal driver. (Rocky Hao) - cleanup a couple of platform thermal drivers to constify thermal_zone_of_device_ops structures. (Julia Lawall) - a couple of fixes in int340x and intel_pch_thermal thermal driver. (Arvind Yadav, Sumeet Pawnikar, Brian Bian, Ed Swierk, Zhang Rui) * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: (27 commits) Thermal: int3406_thermal: fix thermal sysfs I/F thermal: mediatek: minor mtk_thermal.c cleanups thermal: mediatek: extend calibration data for mt2712 chip thermal: mediatek: add Mediatek thermal driver for mt2712 dt-bindings: thermal: Add binding document for Mediatek thermal controller thermal: intel_pch_thermal: Fix enable check on Broadwell-DE thermal: rockchip: Support the RK3328 SOC in thermal driver dt-bindings: rockchip-thermal: Support the RK3328 SoC compatible thermal: bcm2835: constify thermal_zone_of_device_ops structures thermal: exynos: constify thermal_zone_of_device_ops structures thermal: zx2967: constify thermal_zone_of_device_ops structures thermal: rcar_gen3_thermal: constify thermal_zone_of_device_ops structures thermal: qoriq: constify thermal_zone_of_device_ops structures thermal: hisilicon: constify thermal_zone_of_device_ops structures thermal: core: Fix resources release in error paths in thermal_zone_device_register() thermal: core: Use the new 'thermal_zone_destroy_device_groups()' helper function thermal: core: Add some new helper functions to free resources thermal: int3400_thermal: process "thermal table changed" event thermal: uniphier: add UniPhier thermal driver dt-bindings: thermal: add binding documentation for UniPhier thermal monitor ...
2017-09-11Merge tag 'pwm/for-4.14-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm Pull pwm updates from Thierry Reding: "The changes for this release include a new driver for the PWM controller found on SoCs of the ZTX ZX family. Support for an old SH-Mobile SoC has been dropped and the Rockchip and MediaTek drivers gain support for more generations. Other than that there are a bunch of coding style fixes, minor bug fixes and cleanup as well as documentation patches" * tag 'pwm/for-4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (32 commits) pwm: pwm-samsung: fix suspend/resume support pwm: samsung: Remove redundant checks from pwm_samsung_config() pwm: mediatek: Disable clock on PWM configuration failure dt-bindings: pwm: Add MT2712/MT7622 information pwm: mediatek: Fix clock control issue pwm: mediatek: Fix PWM source clock selection pwm: mediatek: Fix Kconfig description pwm: tegra: Explicitly request exclusive reset control pwm: hibvt: Explicitly request exclusive reset control pwm: tiehrpwm: Set driver data before runtime PM enable pwm: tiehrpwm: Miscellaneous coding style fixups pwm: tiecap: Set driver data before runtime PM enable pwm: tiecap: Miscellaneous coding style fixups dt-bindings: pwm: tiecap: Add TI 66AK2G SoC specific compatible pwm: tiehrpwm: fix clock imbalance in probe error path pwm: tiehrpwm: Fix runtime PM imbalance at unbind pwm: Kconfig: Enable pwm-tiecap to be built for Keystone pwm: Add ZTE ZX PWM device driver dt-bindings: pwm: Add bindings doc for ZTE ZX PWM controller pwm: bcm2835: Support for polarity setting via DT ...
2017-09-10Revert "firmware: add sanity check on shutdown/suspend"Linus Torvalds
This reverts commit 81f95076281fdd3bc382e004ba1bce8e82fccbce. It causes random failures of firmware loading at resume time (well, random for me, it seems to be more reliable for others) because the firmware disabling is not actually synchronous with any particular resume event, and at least the btusb driver that uses a workqueue to load the firmware at resume seems to occasionally hit the "firmware loading is disabled" logic because the firmware loader hasn't gotten the resume event yet. Some kind of sanity check for not trying to load firmware when it's not possible might be a good thing, but this commit was not it. Greg seems to have silently suffered the same issue, and pointed to the likely culprit, and Gabriel C verified the revert fixed it for him too. Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Pointed-at-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Tested-by: Gabriel C <nix.or.die@gmail.com> Cc: Luis R. Rodriguez <mcgrof@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-10Merge tag 'armsoc-devicetree' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM/arm64 Devicetree updates from Olof Johansson: "As usual, device tree updates is the bulk of our material in this merge window. This time around, 559 patches affecting both 32- and 64-bit platforms. Changes are too many to list individually, but some of the larger ones: New platform/SoC support: - Automotive: + Renesas R-Car D3 (R8A77995) + TI DT76x + MediaTek mt2712e - Communication-oriented: + Qualcomm IPQ8074 + Broadcom Stingray + Marvell Armada 8080 - Set top box: + Uniphier PXs3 Besides some vendor reference boards for the SoC above, there are also several new boards/machines: - TI AM335x Moxa UC-8100-ME-T open platform - TI AM57xx Beaglebone X15 Rev C - Microchip/Atmel sama5d27 SoM1 EK - Broadcom Raspberry Pi Zero W - Gemini-based D-Link DIR-685 router - Freescale i.MX6: + Toradex Apalis module + Apalis and Ixora carrier boards + Engicam GEAM6UL Starter Kit - Freescale i.MX53-based Beckhoff CX9020 Embedded PC - Mediatek mt7623-based BananaPi R2 - Several Allwinner-based single-board computers: + Cubietruck plus + Bananapi M3, M2M and M64 + NanoPi A64 + A64-OLinuXino + Pine64 - Rockchip RK3328 Pine64/Rock64 board support - Rockchip RK3399 boards: + RK3399 Sapphire module on Excavator carrier (RK3399 reference design) + Theobroma Systems RK3399-Q7 SoM - ZTE ZX296718 PCBOX Board" * tag 'armsoc-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (559 commits) ARM: dts: at91: at91sam9g45: add AC97 arm64: dts: marvell: mcbin: enable more networking ports arm64: dts: marvell: add a reference to the sysctrl syscon in the ppv2 node arm64: dts: marvell: add TX interrupts for PPv2.2 arm64: dts: uniphier: add PXs3 SoC support ARM: dts: uniphier: add pinctrl groups of ethernet phy mode ARM: dts: uniphier: fix size of sdctrl nodes ARM: dts: uniphier: add AIDET nodes arm64: dts: uniphier: fix size of sdctrl node arm64: dts: uniphier: add AIDET nodes Revert "ARM: dts: sun8i: h3: Enable dwmac-sun8i on the Beelink X2" arm64: dts: uniphier: add reset controller node of analog amplifier arm64: dts: marvell: add Device Tree files for Armada-8KP arm64: dts: rockchip: add Haikou baseboard with RK3399-Q7 SoM arm64: dts: rockchip: add RK3399-Q7 (Puma) SoM dt-bindings: add rk3399-q7 SoM ARM: dts: rockchip: enable usb for rv1108-evb ARM: dts: rockchip: add usb nodes for rv1108 SoCs dt-bindings: update grf-binding for rv1108 SoCs ARM: dts: aspeed-g4: fix AHB window size of the SMC controllers ...
2017-09-10Merge tag 'armsoc-drivers' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver updates from Olof Johansson: "This branch contains platform-related driver updates for ARM and ARM64. Among them: - Reset driver updates: + New API for dealing with arrays of resets + Make unimplemented {de,}assert return success on shared resets + MSDKv1 driver + Removal of obsolete Gemini reset driver + Misc updates for sunxi and Uniphier - SoC drivers: + Platform SoC driver registration on Tegra + Shuffle of Qualcomm drivers into a submenu + Allwinner A64 support for SRAM + Renesas R-Car R3 support + Power domains for Rockchip RK3366 - Misc updates and smaller fixes for TEE and memory driver subsystems" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (54 commits) firmware: arm_scpi: fix endianness of dev_id in struct dev_pstate_set soc/tegra: fuse: Add missing semi-colon soc/tegra: Restrict SoC device registration to Tegra drivers: soc: sunxi: add support for A64 and its SRAM C drivers: soc: sunxi: add support for remapping func value to reg value drivers: soc: sunxi: fix error processing on base address when claiming dt-bindings: add binding for Allwinner A64 SRAM controller and SRAM C bus: sunxi-rsb: Enable by default for ARM64 soc/tegra: Register SoC device firmware: tegra: set drvdata earlier memory: Convert to using %pOF instead of full_name soc: Convert to using %pOF instead of full_name bus: Convert to using %pOF instead of full_name firmware: Convert to using %pOF instead of full_name soc: mediatek: add SCPSYS power domain driver for MediaTek MT7622 SoC soc: mediatek: add header files required for MT7622 SCPSYS dt-binding soc: mediatek: reduce code duplication of scpsys_probe across all SoCs dt-bindings: soc: update the binding document for SCPSYS on MediaTek MT7622 SoC reset: uniphier: add analog amplifiers reset control reset: uniphier: add video input subsystem reset control ...
2017-09-10Merge tag 'armsoc-platforms' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM/arm64 SoC platform updates from Olof Johansson: "This branch contains platform updates for 32- and 64-bit ARM, including defconfig updates to enable new options, drivers and platforms. There are also a few fixes and cleanups for some existing vendors. Some of the things worth highlighting here are: - Enabling new crypt drivers on arm64 defconfig - QCOM IPQ8074 clocks and pinctrl drivers on arm64 defconfig - Debug support enabled for Renesas r8a7743 - Various config updates for Renesas platforms (sound, USB, other drivers) - Platform support (including SMP) for TI dra762 - OMAP cleanups: Move to use generic 8250 debug_ll, removal of stale DMA code" * tag 'armsoc-platforms' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (109 commits) ARM: multi_v7_defconfig: make eSDHC driver built-in arm64: defconfig: enable rockchip graphics MAINTAINERS: Update Cavium ThunderX2 entry ARM: config: aspeed: Add I2C, VUART, LPC Snoop ARM: configs: aspeed: Update Aspeed G4 with VMSPLIT_2G ARM: s3c24xx: Fix NAND ECC mode for mini2440 board ARM: davinci_all_defconfig: enable tinydrm and ST7586 arm64: defconfig: Enable QCOM IPQ8074 clock and pinctrl ARM: defconfig: tegra: Enable ChipIdea UDC driver ARM: configs: Add Tegra I2S interfaces to multi_v7_defconfig ARM: tegra: Add Tegra I2S interfaces to defconfig ARM: tegra: Update default configuration for v4.13-rc1 MAINTAINERS: update ARM/ZTE entry soc: versatile: remove unnecessary static in realview_soc_probe() ARM: Convert to using %pOF instead of full_name ARM: hisi: Fix typo in comment ARM: multi_v7_defconfig: add CONFIG_BRCMSTB_THERMAL arm64: defconfig: add CONFIG_BRCMSTB_THERMAL arm64: defconfig: add recently added crypto drivers as modules arm64: defconfig: enable CONFIG_UNIPHIER_WATCHDOG ...
2017-09-09Merge tag 'iommu-updates-v4.14' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull IOMMU updates from Joerg Roedel: "Slightly more changes than usual this time: - KDump Kernel IOMMU take-over code for AMD IOMMU. The code now tries to preserve the mappings of the kernel so that master aborts for devices are avoided. Master aborts cause some devices to fail in the kdump kernel, so this code makes the dump more likely to succeed when AMD IOMMU is enabled. - common flush queue implementation for IOVA code users. The code is still optional, but AMD and Intel IOMMU drivers had their own implementation which is now unified. - finish support for iommu-groups. All drivers implement this feature now so that IOMMU core code can rely on it. - finish support for 'struct iommu_device' in iommu drivers. All drivers now use the interface. - new functions in the IOMMU-API for explicit IO/TLB flushing. This will help to reduce the number of IO/TLB flushes when IOMMU drivers support this interface. - support for mt2712 in the Mediatek IOMMU driver - new IOMMU driver for QCOM hardware - system PM support for ARM-SMMU - shutdown method for ARM-SMMU-v3 - some constification patches - various other small improvements and fixes" * tag 'iommu-updates-v4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (87 commits) iommu/vt-d: Don't be too aggressive when clearing one context entry iommu: Introduce Interface for IOMMU TLB Flushing iommu/s390: Constify iommu_ops iommu/vt-d: Avoid calling virt_to_phys() on null pointer iommu/vt-d: IOMMU Page Request needs to check if address is canonical. arm/tegra: Call bus_set_iommu() after iommu_device_register() iommu/exynos: Constify iommu_ops iommu/ipmmu-vmsa: Make ipmmu_gather_ops const iommu/ipmmu-vmsa: Rereserving a free context before setting up a pagetable iommu/amd: Rename a few flush functions iommu/amd: Check if domain is NULL in get_domain() and return -EBUSY iommu/mediatek: Fix a build warning of BIT(32) in ARM iommu/mediatek: Fix a build fail of m4u_type iommu: qcom: annotate PM functions as __maybe_unused iommu/pamu: Fix PAMU boot crash memory: mtk-smi: Degrade SMI init to module_init iommu/mediatek: Enlarge the validate PA range for 4GB mode iommu/mediatek: Disable iommu clock when system suspend iommu/mediatek: Move pgtable allocation into domain_alloc iommu/mediatek: Merge 2 M4U HWs into one iommu domain ...
2017-09-09Merge tag 'for-linus-20170904' of git://git.infradead.org/linux-mtdLinus Torvalds
Pull MTD updates from Boris Brezillon: "General updates: - Constify pci_device_id in various drivers - Constify device_type - Remove pad control code from the Gemini driver - Use %pOF to print OF node full_name - Various fixes in the physmap_of driver - Remove unused vars in mtdswap - Check devm_kzalloc() return value in the spear_smi driver - Check clk_prepare_enable() return code in the st_spi_fsm driver - Create per MTD device debugfs enties NAND updates, from Boris Brezillon: - Fix memory leaks in the core - Remove unused NAND locking support - Rename nand.h into rawnand.h (preparing support for spi NANDs) - Use NAND_MAX_ID_LEN where appropriate - Fix support for 20nm Hynix chips - Fix support for Samsung and Hynix SLC NANDs - Various cleanup, improvements and fixes in the qcom driver - Fixes for bugs detected by various static code analysis tools - Fix mxc ooblayout definition - Add a new part_parsers to tmio and sharpsl platform data in order to define a custom list of partition parsers - Request the reset line in exclusive mode in the sunxi driver - Fix a build error in the orion-nand driver when compiled for ARMv4 - Allow 64-bit mvebu platforms to select the PXA3XX driver SPI NOR updates, from Cyrille Pitchen and Marek Vasut: - add support to the JEDEC JESD216B specification (SFDP tables). - add support to the Intel Denverton SPI flash controller. - fix error recovery for Spansion/Cypress SPI NOR memories. - fix 4-byte address management for the Aspeed SPI controller. - add support to some Microchip SST26 memory parts - remove unneeded pinctrl header Write a message for tag:" * tag 'for-linus-20170904' of git://git.infradead.org/linux-mtd: (74 commits) mtd: nand: complain loudly when chip->bits_per_cell is not correctly initialized mtd: nand: make Samsung SLC NAND usable again mtd: nand: tmio: Register partitions using the parsers mfd: tmio: Add partition parsers platform data mtd: nand: sharpsl: Register partitions using the parsers mtd: nand: sharpsl: Add partition parsers platform data mtd: nand: qcom: Support for IPQ8074 QPIC NAND controller mtd: nand: qcom: support for IPQ4019 QPIC NAND controller dt-bindings: qcom_nandc: IPQ8074 QPIC NAND documentation dt-bindings: qcom_nandc: IPQ4019 QPIC NAND documentation dt-bindings: qcom_nandc: fix the ipq806x device tree example mtd: nand: qcom: support for different DEV_CMD register offsets mtd: nand: qcom: QPIC data descriptors handling mtd: nand: qcom: enable BAM or ADM mode mtd: nand: qcom: erased codeword detection configuration mtd: nand: qcom: support for read location registers mtd: nand: qcom: support for passing flags in DMA helper functions mtd: nand: qcom: add BAM DMA descriptor handling mtd: nand: qcom: allocate BAM transaction mtd: nand: qcom: DMA mapping support for register read buffer ...
2017-09-09Merge tag 'for-v4.14' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply Pull power supply and reset changes from Sebastian Reichel: "New chip/feature support: - bq27xxx: support updating battery config from DT - bq24190: support loading battery charge info from DT - LTC2941: add LTC2942/LTC2944 support - max17042: add ACPI support - max1721x: new driver Misc: - Move bq27xxx w1 driver from w1 into power-supply subsystem - Introduce power_supply_set_input_current_limit_from_supplier - constify stuff - some minor fixes" * tag 'for-v4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (39 commits) power: supply: bq27xxx: enable writing capacity values for bq27421 power: supply: bq24190_charger: Get input_current_limit from our supplier power: supply: bq24190_charger: Export 5V boost converter as regulator power: supply: bq24190_charger: Add power_supply_battery_info support power: supply: bq24190_charger: Add property system-minimum-microvolt power: supply: bq24190_charger: Enable devicetree config dt-bindings: power: supply: Add docs for TI BQ24190 battery charger power: supply: bq27xxx: Remove duplicate chip data arrays power: supply: bq27xxx: Enable data memory update for certain chips power: supply: bq27xxx: Add chip IDs for previously shadowed chips power: supply: bq27xxx: Create single chip data table power: supply: bq24190_charger: Add ti,bq24192i to devicetree table power: supply: bq24190_charger: Add input_current_limit property power: supply: Add power_supply_set_input_current_limit_from_supplier helper power: supply: max17042_battery: Fix compiler warning power: supply: core: Delete two error messages for a failed memory allocation in power_supply_check_supplies() power: supply: make device_attribute const power: supply: max17042_battery: Fix ACPI interrupt issues power: supply: max17042_battery: Add support for ACPI enumeration power: supply: lp8788: Make several arrays static const * const ...
2017-09-09Merge tag 'rpmsg-v4.14' of git://github.com/andersson/remoteprocLinus Torvalds
Pull rpmsg updates from Bjorn Andersson: "This extends the Qualcomm GLINK implementation to support the additional features used for communicating with modem and DSP coprocessors in modern Qualcomm platforms. In addition to this there's support for placing virtio RPMSG buffers in non-System RAM" * tag 'rpmsg-v4.14' of git://github.com/andersson/remoteproc: (29 commits) rpmsg: glink: initialize ret to zero to ensure error status check is correct rpmsg: glink: fix null pointer dereference on a null intent dt-bindings: soc: qcom: Extend GLINK to cover SMEM remoteproc: qcom: adsp: Allow defining GLINK edge rpmsg: glink: Export symbols from common code rpmsg: glink: Release idr lock before returning on error rpmsg: glink: Handle remote rx done command rpmsg: glink: Request for intents when unavailable rpmsg: glink: Use the intents passed by remote rpmsg: glink: Receive and store the remote intent buffers rpmsg: glink: Add announce_create ops and preallocate intents rpmsg: glink: Add rx done command rpmsg: glink: Make RX FIFO peak accessor to take an offset rpmsg: glink: Use the local intents when receiving data rpmsg: glink: Add support for TX intents rpmsg: glink: Fix idr_lock from mutex to spinlock rpmsg: glink: Add support for transport version negotiation rpmsg: glink: Introduce glink smem based transport rpmsg: glink: Do a mbox_free_channel in remove rpmsg: glink: Return -EAGAIN when there is no FIFO space ...
2017-09-09Merge tag 'rproc-v4.14' of git://github.com/andersson/remoteprocLinus Torvalds
Pull remoteproc updates from Bjorn Andersson: "This adds and improves remoteproc support for TI DA8xx/OMAP-L13x DSP, TI Keystone 66AK2G DSP and iMX6SX/7D Cortex M4 coprocessors. It introduces the Qualcomm restart notifier and a few fixes" * tag 'rproc-v4.14' of git://github.com/andersson/remoteproc: remoteproc: Introduce rproc handle accessor for children remoteproc: qcom: Make ssr_notifiers local remoteproc: Stop subdevices in reverse order remoteproc: imx_rproc: add a NXP/Freescale imx_rproc driver remoteproc: dt: Provide bindings for iMX6SX/7D Remote Processor Controller driver remoteproc: qcom: Use PTR_ERR_OR_ZERO remoteproc: st: explicitly request exclusive reset control remoteproc: qcom: explicitly request exclusive reset control remoteproc/keystone: explicitly request exclusive reset control remoteproc/keystone: Add support for Keystone 66AK2G SOCs remoteproc/davinci: Add device tree support for OMAP-L138 DSP dt-bindings: remoteproc: Add bindings for Davinci DSP processors remoteproc/davinci: Add support to parse internal memories remoteproc/davinci: Switch to platform_get_resource_byname() remoteproc: make device_type const soc: qcom: GLINK SSR notifier remoteproc: qcom: Add support for SSR notifications remoteproc: Merge __rproc_boot() with rproc_boot()
2017-09-09Merge branch 'i2c/for-4.14' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c updates from Wolfram Sang: - new drivers for Spreadtrum I2C, Intel Cherry Trail Whiskey Cove SMBUS - quite some driver updates - cleanups for the i2c-mux subsystem - some subsystem-wide constification - further cleanup of include/linux/i2c * 'i2c/for-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (50 commits) i2c: sprd: Fix undefined reference errors i2c: nomadik: constify amba_id i2c: versatile: Make i2c_algo_bit_data const i2c: busses: make i2c_adapter_quirks const i2c: busses: make i2c_adapter const i2c: busses: make i2c_algorithm const i2c: Add Spreadtrum I2C controller driver dt-bindings: i2c: Add Spreadtrum I2C controller documentation i2c-cht-wc: make cht_wc_i2c_adap_driver static MAINTAINERS: Add entry for drivers/i2c/busses/i2c-cht-wc.c i2c: aspeed: Retain delay/setup/hold values when configuring bus frequency dt-bindings: i2c: eeprom: Document vendor to be used and deprecated ones i2c: i801: Restore the presence state of P2SB PCI device after reading BAR MAINTAINERS: drop entry for Blackfin I2C and Sonic's email blackfin: merge the two TWI header files i2c: davinci: Preserve return value of devm_clk_get i2c: mediatek: Add i2c compatible for MediaTek MT7622 dt-bindings: i2c: Add MediaTek MT7622 i2c binding dt-bindings: i2c: modify information formats i2c: mux: i2c-arb-gpio-challenge: allow compiling w/o OF support ...
2017-09-09Merge branch 'for-4.14/block-postmerge' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull followup block layer updates from Jens Axboe: "I ended up splitting the main pull request for this series into two, mainly because of clashes between NVMe fixes that went into 4.13 after the for-4.14 branches were split off. This pull request is mostly NVMe, but not exclusively. In detail, it contains: - Two pull request for NVMe changes from Christoph. Nothing new on the feature front, basically just fixes all over the map for the core bits, transport, rdma, etc. - Series from Bart, cleaning up various bits in the BFQ scheduler. - Series of bcache fixes, which has been lingering for a release or two. Coly sent this in, but patches from various people in this area. - Set of patches for BFQ from Paolo himself, updating both documentation and fixing some corner cases in performance. - Series from Omar, attempting to now get the 4k loop support correct. Our confidence level is higher this time. - Series from Shaohua for loop as well, improving O_DIRECT performance and fixing a use-after-free" * 'for-4.14/block-postmerge' of git://git.kernel.dk/linux-block: (74 commits) bcache: initialize dirty stripes in flash_dev_run() loop: set physical block size to logical block size bcache: fix bch_hprint crash and improve output bcache: Update continue_at() documentation bcache: silence static checker warning bcache: fix for gc and write-back race bcache: increase the number of open buckets bcache: Correct return value for sysfs attach errors bcache: correct cache_dirty_target in __update_writeback_rate() bcache: gc does not work when triggering by manual command bcache: Don't reinvent the wheel but use existing llist API bcache: do not subtract sectors_to_gc for bypassed IO bcache: fix sequential large write IO bypass bcache: Fix leak of bdev reference block/loop: remove unused field block/loop: fix use after free bfq: Use icq_to_bic() consistently bfq: Suppress compiler warnings about comparisons bfq: Check kstrtoul() return value bfq: Declare local functions static ...
2017-09-09dt-bindings: watchdog: renesas-wdt: Add support for the r8a77995 wdtGeert Uytterhoeven
Document support for the Watchdog Timer (WDT) Controller in the Renesas R-Car D3 (r8a77995) SoC. No driver update is needed. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Rob Herring <robh@kernel.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2017-09-09dt-bindings: watchdog: aspeed: External reset signal propertiesAndrew Jeffery
For the AST2500 and compatible watchdog controllers the external reset signal can be configured for push-pull or open-drain drive types, and in the case of push-pull driving, active low or high. Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Acked-by: Rob Herring <robh@kernel.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2017-09-09drivers/watchdog: Add optional ASPEED device tree propertiesChristopher Bostic
Describe device tree optional properties: * aspeed,reset-type = "cpu|soc|system|none" One of three different, mutually exclusive, values "cpu" : ARM CPU reset on signal "soc" : 'System on chip' reset "system" : Full system reset The value can also be set to "none" which indicates that no reset of any kind is to be done via this watchdog. This assumes another watchdog on the chip is to take care of resets. * aspeed,external-signal - Generate external signal (WDT1 and WDT2 only) * aspeed,alt-boot - Boot from alternate block on signal Signed-off-by: Christopher Bostic <cbostic@linux.vnet.ibm.com> Acked-by: Rob Herring <robh@kernel.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2017-09-09dt-bindings: watchdog: mediatek: add support for MediaTek MT7623 and MT7622 SoCSean Wang
This updates dt-binding documentation for MediaTek MT7622 and MT7623 SoC. For the both SoCs supported all rely on the fallback binding of the case with "mediatek,mt6589-wdt". Signed-off-by: Sean Wang <sean.wang@mediatek.com> Acked-by: Rob Herring <robh@kernel.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2017-09-09watchdog: meson-wdt: add support for the watchdog on Meson8 and Meson8m2Martin Blumenstingl
The watchdog IP block on Meson8 and Meson8m2 is already supported by the existing meson-wdt driver. Meson8 uses the same register bits as Meson6, while the newer Meson8m2 SoC uses the same register bits as Meson8b. Currently watchdog support on Meson8 SoC already works because meson8.dtsi simply uses the "amlogic,meson6-wdt" compatible. Adding a separate compatible for Meson8 makes this more explicit though. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2017-09-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: "The iwlwifi firmware compat fix is in here as well as some other stuff: 1) Fix request socket leak introduced by BPF deadlock fix, from Eric Dumazet. 2) Fix VLAN handling with TXQs in mac80211, from Johannes Berg. 3) Missing __qdisc_drop conversions in prio and qfq schedulers, from Gao Feng. 4) Use after free in netlink nlk groups handling, from Xin Long. 5) Handle MTU update properly in ipv6 gre tunnels, from Xin Long. 6) Fix leak of ipv6 fib tables on netns teardown, from Sabrina Dubroca with follow-on fix from Eric Dumazet. 7) Need RCU and preemption disabled during generic XDP data patch, from John Fastabend" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (54 commits) bpf: make error reporting in bpf_warn_invalid_xdp_action more clear Revert "mdio_bus: Remove unneeded gpiod NULL check" bpf: devmap, use cond_resched instead of cpu_relax bpf: add support for sockmap detach programs net: rcu lock and preempt disable missing around generic xdp bpf: don't select potentially stale ri->map from buggy xdp progs net: tulip: Constify tulip_tbl net: ethernet: ti: netcp_core: no need in netif_napi_del davicom: Display proper debug level up to 6 net: phy: sfp: rename dt properties to match the binding dt-binding: net: sfp binding documentation dt-bindings: add SFF vendor prefix dt-bindings: net: don't confuse with generic PHY property ip6_tunnel: fix setting hop_limit value for ipv6 tunnel ip_tunnel: fix setting ttl and tos value in collect_md mode ipv6: fix typo in fib6_net_exit() tcp: fix a request socket leak sctp: fix missing wake ups in some situations netfilter: xt_hashlimit: fix build error caused by 64bit division netfilter: xt_hashlimit: alloc hashtable with right size ...
2017-09-09Merge branch 'akpm' (patches from Andrew)Linus Torvalds
Merge more updates from Andrew Morton: - most of the rest of MM - a small number of misc things - lib/ updates - checkpatch - autofs updates - ipc/ updates * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (126 commits) ipc: optimize semget/shmget/msgget for lots of keys ipc/sem: play nicer with large nsops allocations ipc/sem: drop sem_checkid helper ipc: convert kern_ipc_perm.refcount from atomic_t to refcount_t ipc: convert sem_undo_list.refcnt from atomic_t to refcount_t ipc: convert ipc_namespace.count from atomic_t to refcount_t kcov: support compat processes sh: defconfig: cleanup from old Kconfig options mn10300: defconfig: cleanup from old Kconfig options m32r: defconfig: cleanup from old Kconfig options drivers/pps: use surrounding "if PPS" to remove numerous dependency checks drivers/pps: aesthetic tweaks to PPS-related content cpumask: make cpumask_next() out-of-line kmod: move #ifdef CONFIG_MODULES wrapper to Makefile kmod: split off umh headers into its own file MAINTAINERS: clarify kmod is just a kernel module loader kmod: split out umh code into its own file test_kmod: flip INT checks to be consistent test_kmod: remove paranoid UINT_MAX check on uint range processing vfat: deduplicate hex2bin() ...
2017-09-09watchdog: Revert "iTCO_wdt: all versions count down twice"Wim Van Sebroeck
This reverts commit 1fccb73011ea8a5fa0c6d357c33fa29c695139ea. Reported as Bug 196509 - iTCO_wdt regression reboot before timeout expire Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2017-09-08dt-binding: net: sfp binding documentationBaruch Siach
Add device-tree binding documentation SFP transceivers. Support for SFP transceivers has been recently introduced (drivers/net/phy/sfp.c). Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-08dt-bindings: add SFF vendor prefixBaruch Siach
Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-08dt-bindings: net: don't confuse with generic PHY propertyBaruch Siach
This complements commit 9a94b3a4bd (dt-binding: phy: don't confuse with Ethernet phy properties). The generic PHY 'phys' property sometime appears in the same node with the Ethernet PHY 'phy' or 'phy-handle' properties. Add a warning in ethernet.txt to reduce confusion. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-08drivers/pps: aesthetic tweaks to PPS-related contentRobert P. J. Day
Collection of aesthetic adjustments to various PPS-related files, directories and Documentation, some quite minor just for the sake of consistency, including: * Updated example of pps device tree node (courtesy Rodolfo G.) * "PPS-API" -> "PPS API" * "pps_source_info_s" -> "pps_source_info" * "ktimer driver" -> "pps-ktimer driver" * "ppstest /dev/pps0" -> "ppstest /dev/pps1" to match example * Add missing PPS-related entries to MAINTAINERS file * Other trivialities Link: http://lkml.kernel.org/r/alpine.LFD.2.20.1708261048220.8106@localhost.localdomain Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Acked-by: Rodolfo Giometti <giometti@enneenne.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-08rbtree: cache leftmost node internallyDavidlohr Bueso
Patch series "rbtree: Cache leftmost node internally", v4. A series to extending rbtrees to internally cache the leftmost node such that we can have fast overlap check optimization for all interval tree users[1]. The benefits of this series are that: (i) Unify users that do internal leftmost node caching. (ii) Optimize all interval tree users. (iii) Convert at least two new users (epoll and procfs) to the new interface. This patch (of 16): Red-black tree semantics imply that nodes with smaller or greater (or equal for duplicates) keys always be to the left and right, respectively. For the kernel this is extremely evident when considering our rb_first() semantics. Enabling lookups for the smallest node in the tree in O(1) can save a good chunk of cycles in not having to walk down the tree each time. To this end there are a few core users that explicitly do this, such as the scheduler and rtmutexes. There is also the desire for interval trees to have this optimization allowing faster overlap checking. This patch introduces a new 'struct rb_root_cached' which is just the root with a cached pointer to the leftmost node. The reason why the regular rb_root was not extended instead of adding a new structure was that this allows the user to have the choice between memory footprint and actual tree performance. The new wrappers on top of the regular rb_root calls are: - rb_first_cached(cached_root) -- which is a fast replacement for rb_first. - rb_insert_color_cached(node, cached_root, new) - rb_erase_cached(node, cached_root) In addition, augmented cached interfaces are also added for basic insertion and deletion operations; which becomes important for the interval tree changes. With the exception of the inserts, which adds a bool for updating the new leftmost, the interfaces are kept the same. To this end, porting rb users to the cached version becomes really trivial, and keeping current rbtree semantics for users that don't care about the optimization requires zero overhead. Link: http://lkml.kernel.org/r/20170719014603.19029-2-dave@stgolabs.net Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Reviewed-by: Jan Kara <jack@suse.cz> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-08hmm: heterogeneous memory management documentationJérôme Glisse
Patch series "HMM (Heterogeneous Memory Management)", v25. Heterogeneous Memory Management (HMM) (description and justification) Today device driver expose dedicated memory allocation API through their device file, often relying on a combination of IOCTL and mmap calls. The device can only access and use memory allocated through this API. This effectively split the program address space into object allocated for the device and useable by the device and other regular memory (malloc, mmap of a file, share memory, â) only accessible by CPU (or in a very limited way by a device by pinning memory). Allowing different isolated component of a program to use a device thus require duplication of the input data structure using device memory allocator. This is reasonable for simple data structure (array, grid, image, â) but this get extremely complex with advance data structure (list, tree, graph, â) that rely on a web of memory pointers. This is becoming a serious limitation on the kind of work load that can be offloaded to device like GPU. New industry standard like C++, OpenCL or CUDA are pushing to remove this barrier. This require a shared address space between GPU device and CPU so that GPU can access any memory of a process (while still obeying memory protection like read only). This kind of feature is also appearing in various other operating systems. HMM is a set of helpers to facilitate several aspects of address space sharing and device memory management. Unlike existing sharing mechanism that rely on pining pages use by a device, HMM relies on mmu_notifier to propagate CPU page table update to device page table. Duplicating CPU page table is only one aspect necessary for efficiently using device like GPU. GPU local memory have bandwidth in the TeraBytes/ second range but they are connected to main memory through a system bus like PCIE that is limited to 32GigaBytes/second (PCIE 4.0 16x). Thus it is necessary to allow migration of process memory from main system memory to device memory. Issue is that on platform that only have PCIE the device memory is not accessible by the CPU with the same properties as main memory (cache coherency, atomic operations, ...). To allow migration from main memory to device memory HMM provides a set of helper to hotplug device memory as a new type of ZONE_DEVICE memory which is un-addressable by CPU but still has struct page representing it. This allow most of the core kernel logic that deals with a process memory to stay oblivious of the peculiarity of device memory. When page backing an address of a process is migrated to device memory the CPU page table entry is set to a new specific swap entry. CPU access to such address triggers a migration back to system memory, just like if the page was swap on disk. HMM also blocks any one from pinning a ZONE_DEVICE page so that it can always be migrated back to system memory if CPU access it. Conversely HMM does not migrate to device memory any page that is pin in system memory. To allow efficient migration between device memory and main memory a new migrate_vma() helpers is added with this patchset. It allows to leverage device DMA engine to perform the copy operation. This feature will be use by upstream driver like nouveau mlx5 and probably other in the future (amdgpu is next suspect in line). We are actively working on nouveau and mlx5 support. To test this patchset we also worked with NVidia close source driver team, they have more resources than us to test this kind of infrastructure and also a bigger and better userspace eco-system with various real industry workload they can be use to test and profile HMM. The expected workload is a program builds a data set on the CPU (from disk, from network, from sensors, â). Program uses GPU API (OpenCL, CUDA, ...) to give hint on memory placement for the input data and also for the output buffer. Program call GPU API to schedule a GPU job, this happens using device driver specific ioctl. All this is hidden from programmer point of view in case of C++ compiler that transparently offload some part of a program to GPU. Program can keep doing other stuff on the CPU while the GPU is crunching numbers. It is expected that CPU will not access the same data set as the GPU while GPU is working on it, but this is not mandatory. In fact we expect some small memory object to be actively access by both GPU and CPU concurrently as synchronization channel and/or for monitoring purposes. Such object will stay in system memory and should not be bottlenecked by system bus bandwidth (rare write and read access from both CPU and GPU). As we are relying on device driver API, HMM does not introduce any new syscall nor does it modify any existing ones. It does not change any POSIX semantics or behaviors. For instance the child after a fork of a process that is using HMM will not be impacted in anyway, nor is there any data hazard between child COW or parent COW of memory that was migrated to device prior to fork. HMM assume a numbers of hardware features. Device must allow device page table to be updated at any time (ie device job must be preemptable). Device page table must provides memory protection such as read only. Device must track write access (dirty bit). Device must have a minimum granularity that match PAGE_SIZE (ie 4k). Reviewer (just hint): Patch 1 HMM documentation Patch 2 introduce core infrastructure and definition of HMM, pretty small patch and easy to review Patch 3 introduce the mirror functionality of HMM, it relies on mmu_notifier and thus someone familiar with that part would be in better position to review Patch 4 is an helper to snapshot CPU page table while synchronizing with concurrent page table update. Understanding mmu_notifier makes review easier. Patch 5 is mostly a wrapper around handle_mm_fault() Patch 6 add new add_pages() helper to avoid modifying each arch memory hot plug function Patch 7 add a new memory type for ZONE_DEVICE and also add all the logic in various core mm to support this new type. Dan Williams and any core mm contributor are best people to review each half of this patchset Patch 8 special case HMM ZONE_DEVICE pages inside put_page() Kirill and Dan Williams are best person to review this Patch 9 allow to uncharge a page from memory group without using the lru list field of struct page (best reviewer: Johannes Weiner or Vladimir Davydov or Michal Hocko) Patch 10 Add support to uncharge ZONE_DEVICE page from a memory cgroup (best reviewer: Johannes Weiner or Vladimir Davydov or Michal Hocko) Patch 11 add helper to hotplug un-addressable device memory as new type of ZONE_DEVICE memory (new type introducted in patch 3 of this serie). This is boiler plate code around memory hotplug and it also pick a free range of physical address for the device memory. Note that the physical address do not point to anything (at least as far as the kernel knows). Patch 12 introduce a new hmm_device class as an helper for device driver that want to expose multiple device memory under a common fake device driver. This is usefull for multi-gpu configuration. Anyone familiar with device driver infrastructure can review this. Boiler plate code really. Patch 13 add a new migrate mode. Any one familiar with page migration is welcome to review. Patch 14 introduce a new migration helper (migrate_vma()) that allow to migrate a range of virtual address of a process using device DMA engine to perform the copy. It is not limited to do copy from and to device but can also do copy between any kind of source and destination memory. Again anyone familiar with migration code should be able to verify the logic. Patch 15 optimize the new migrate_vma() by unmapping pages while we are collecting them. This can be review by any mm folks. Patch 16 add unaddressable memory migration to helper introduced in patch 7, this can be review by anyone familiar with migration code Patch 17 add a feature that allow device to allocate non-present page on the GPU when migrating a range of address to device memory. This is an helper for device driver to avoid having to first allocate system memory before migration to device memory Patch 18 add a new kind of ZONE_DEVICE memory for cache coherent device memory (CDM) Patch 19 add an helper to hotplug CDM memory Previous patchset posting : v1 http://lwn.net/Articles/597289/ v2 https://lkml.org/lkml/2014/6/12/559 v3 https://lkml.org/lkml/2014/6/13/633 v4 https://lkml.org/lkml/2014/8/29/423 v5 https://lkml.org/lkml/2014/11/3/759 v6 http://lwn.net/Articles/619737/ v7 http://lwn.net/Articles/627316/ v8 https://lwn.net/Articles/645515/ v9 https://lwn.net/Articles/651553/ v10 https://lwn.net/Articles/654430/ v11 http://www.gossamer-threads.com/lists/linux/kernel/2286424 v12 http://www.kernelhub.org/?msg=972982&p=2 v13 https://lwn.net/Articles/706856/ v14 https://lkml.org/lkml/2016/12/8/344 v15 http://www.mail-archive.com/linux-kernel@xxxxxxxxxxxxxxx/msg1304107.html v16 http://www.spinics.net/lists/linux-mm/msg119814.html v17 https://lkml.org/lkml/2017/1/27/847 v18 https://lkml.org/lkml/2017/3/16/596 v19 https://lkml.org/lkml/2017/4/5/831 v20 https://lwn.net/Articles/720715/ v21 https://lkml.org/lkml/2017/4/24/747 v22 http://lkml.iu.edu/hypermail/linux/kernel/1705.2/05176.html v23 https://www.mail-archive.com/linux-kernel@vger.kernel.org/msg1404788.html v24 https://lwn.net/Articles/726691/ This patch (of 19): This adds documentation for HMM (Heterogeneous Memory Management). It presents the motivation behind it, the features necessary for it to be useful and and gives an overview of how this is implemented. Link: http://lkml.kernel.org/r/20170817000548.32038-2-jglisse@redhat.com Signed-off-by: Jérôme Glisse <jglisse@redhat.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: David Nellans <dnellans@nvidia.com> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Aneesh Kumar <aneesh.kumar@linux.vnet.ibm.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Evgeny Baskakov <ebaskakov@nvidia.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Mark Hairgrove <mhairgrove@nvidia.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Sherry Cheung <SCheung@nvidia.com> Cc: Subhash Gutti <sgutti@nvidia.com> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Bob Liu <liubo95@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-08Merge tag 'platform-drivers-x86-v4.14-1' of ↵Linus Torvalds
git://git.infradead.org/linux-platform-drivers-x86 Pull x86 platform driver updates from Darren Hart: "Several fixes from static analysis and message noise reduction. Correct WMI core and related drivers to evaluate instance number 0x0 in accordance with the documentation. Add intel-telemetry support for Gemini Lake. Various individual driver fixes noted below. dell-wmi: - Update dell_wmi_check_descriptor_buffer() to new model intel-vbtn: - reduce unnecessary messages for normal users - match power button on press rather than release intel-hid: - reduce unnecessary messages for normal users thinkpad_acpi: - Fix warning about deprecated hwmon_device_register wmi: - Fix check for method instance number ideapad-laptop: - Expose conservation mode switch intel_pmc_core: - Make the driver PCH family agnostic peaq-wmi: - Evaluate wmi method with instance number 0x0 - silence a static checker warning mxm-wmi: - Evaluate wmi method with instance number 0x0 asus-wmi: - Evaluate wmi method with instance number 0x0 intel_scu_ipc: - make intel_scu_ipc_pdata_t const intel_mid_powerbtn: - make mid_pb_ddata const - fix error return code in mid_pb_probe() hp-wmi: - Remove unused macro helper - Correctly determine method id in WMI calls dell-wmi: - Fix driver interface version query intel_telemetry: - remove redundant macro definition - Add GLK PSS Event Table alienware-wmi: - fix format string overflow warning ibm_rtl: - remove unnecessary static in ibm_rtl_write() msi-wmi: - remove unnecessary static in msi_wmi_notify()" * tag 'platform-drivers-x86-v4.14-1' of git://git.infradead.org/linux-platform-drivers-x86: (23 commits) platform/x86: dell-wmi: Update dell_wmi_check_descriptor_buffer() to new model platform/x86: intel-vbtn: reduce unnecessary messages for normal users platform/x86: intel-hid: reduce unnecessary messages for normal users platform/x86: thinkpad_acpi: Fix warning about deprecated hwmon_device_register platform/x86: wmi: Fix check for method instance number platform/x86: ideapad-laptop: Expose conservation mode switch platform/x86: intel_pmc_core: Make the driver PCH family agnostic platform/x86: peaq-wmi: Evaluate wmi method with instance number 0x0 platform/x86: mxm-wmi: Evaluate wmi method with instance number 0x0 platform/x86: asus-wmi: Evaluate wmi method with instance number 0x0 platform/x86: intel_scu_ipc: make intel_scu_ipc_pdata_t const platform/x86: intel_mid_powerbtn: make mid_pb_ddata const platform/x86: intel_mid_powerbtn: fix error return code in mid_pb_probe() platform/x86: hp-wmi: Remove unused macro helper platform/x86: hp-wmi: Correctly determine method id in WMI calls platform/x86: intel-vbtn: match power button on press rather than release platform/x86: dell-wmi: Fix driver interface version query platform/x86: intel_telemetry: remove redundant macro definition platform/x86: intel_telemetry: Add GLK PSS Event Table platform/x86: alienware-wmi: fix format string overflow warning ...
2017-09-08Merge tag 'arc-4.14-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc Pull ARC updates from Vineet Gupta: - Support for HSDK board hosting a Quad core HS38x4 based SoC running @1GHz (and some prerrquisite changes such as ability to scoot the kernel code/data from start of memory map etc) - Quite a few updates for EZChip (Mellanox) platform - Fixes to fault/exception printing * tag 'arc-4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: (26 commits) ARC: Re-enable MMU upon Machine Check exception ARC: Show fault information passed to show_kernel_fault_diag() ARC: [plat-hsdk] initial port for HSDK board ARC: mm: Decouple RAM base address from kernel link address ARCv2: IOC: Tighten up the contraints (specifically base / size alignment) ARC: [plat-axs103] refactor the DT fudging code ARC: [plat-axs103] use clk driver #2: Add core pll node to DT to manage cpu clk ARC: [plat-axs103] use clk driver #1: Get rid of platform specific cpu clk setting ARCv2: SLC: provide a line based flush routine for debugging ARC: Hardcode ARCH_DMA_MINALIGN to max line length we may have ARC: [plat-eznps] handle extra aux regs #2: kernel/entry exit ARC: [plat-eznps] handle extra aux regs #1: save/restore on context switch ARC: [plat-eznps] avoid toggling of DPC register ARC: [plat-eznps] Update the init sequence of aux regs per cpu. ARC: [plat-eznps] new command line argument for HW scheduler at MTM ARC: set boot print log level to PR_INFO ARC: [plat-eznps] Handle user memory error same in simulation and silicon ARC: [plat-eznps] use schd.wft instruction instead of sleep at idle task ARC: create cpu specific version of arch_cpu_idle() ARC: [plat-eznps] spinlock aware for MTM ...