summaryrefslogtreecommitdiff
path: root/Documentation
AgeCommit message (Collapse)Author
2018-08-26Merge branch 'irq-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq update from Thomas Gleixner: "A small set of updats/fixes for the irq subsystem: - Allow GICv3 interrupts to be configured as wake-up sources to enable wakeup from suspend - Make the error handling of the STM32 irqchip init function work - A set of small cleanups and improvements" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/gic-v3: Allow interrupt to be configured as wake-up sources irqchip/tango: Set irq handler and data in one go dt-bindings: irqchip: renesas-irqc: Document r8a774a1 support irqchip/s3c24xx: Remove unneeded comparison of unsigned long to 0 irqchip/stm32: Fix init error handling irqchip/bcm7038-l1: Hide cpu offline callback when building for !SMP
2018-08-25Merge tag 'armsoc-late' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC late updates from Olof Johansson: "A couple of late-merged changes that would be useful to get in this merge window: - Driver support for reset of audio complex on Meson platforms. The audio driver went in this merge window, and these changes have been in -next for a while (just not in our tree). - Power management fixes for IOMMU on Rockchip platforms, getting closer to kexec working on them, including Chromebooks. - Another pass updating "arm,psci" -> "psci" for some properties that have snuck in since last time it was done" * tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: iommu/rockchip: Move irq request past pm_runtime_enable iommu/rockchip: Handle errors returned from PM framework arm64: rockchip: Force CONFIG_PM on Rockchip systems ARM: rockchip: Force CONFIG_PM on Rockchip systems arm64: dts: Fix various entry-method properties to reflect documentation reset: imx7: Fix always writing bits as 0 reset: meson: add meson audio arb driver reset: meson: add dt-bindings for meson-axg audio arb
2018-08-25Merge tag 'kbuild-v4.19-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull more Kbuild updates from Masahiro Yamada: - add build_{menu,n,g,x}config targets for compile-testing Kconfig - fix and improve recursive dependency detection in Kconfig - fix parallel building of menuconfig/nconfig - fix syntax error in clang-version.sh - suppress distracting log from syncconfig - remove obsolete "rpm" target - remove VMLINUX_SYMBOL(_STR) macro entirely - fix microblaze build with CONFIG_DYNAMIC_FTRACE - move compiler test for dead code/data elimination to Kconfig - rename well-known LDFLAGS variable to KBUILD_LDFLAGS - misc fixes and cleanups * tag 'kbuild-v4.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kbuild: rename LDFLAGS to KBUILD_LDFLAGS kbuild: pass LDFLAGS to recordmcount.pl kbuild: test dead code/data elimination support in Kconfig initramfs: move gen_initramfs_list.sh from scripts/ to usr/ vmlinux.lds.h: remove stale <linux/export.h> include export.h: remove VMLINUX_SYMBOL() and VMLINUX_SYMBOL_STR() Coccinelle: remove pci_alloc_consistent semantic to detect in zalloc-simple.cocci kbuild: make sorting initramfs contents independent of locale kbuild: remove "rpm" target, which is alias of "rpm-pkg" kbuild: Fix LOADLIBES rename in Documentation/kbuild/makefiles.txt kconfig: suppress "configuration written to .config" for syncconfig kconfig: fix "Can't open ..." in parallel build kbuild: Add a space after `!` to prevent parsing as file pattern scripts: modpost: check memory allocation results kconfig: improve the recursive dependency report kconfig: report recursive dependency involving 'imply' kconfig: error out when seeing recursive dependency kconfig: add build-only configurator targets scripts/dtc: consolidate include path options in Makefile
2018-08-24Merge branch 'for-4.19' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata Pull libata updates from Tejun Heo: "Nothing too interesting. Mostly ahci and ahci_platform changes, many around power management" * 'for-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: (22 commits) ata: ahci_platform: enable to get and control reset ata: libahci_platform: add reset control support ata: add an extra argument to ahci_platform_get_resources() ata: sata_rcar: Add r8a77965 support ata: sata_rcar: exclude setting of PHY registers in Gen3 ata: sata_rcar: really mask all interrupts on Gen2 and later Revert "ata: ahci_platform: allow disabling of hotplug to save power" ata: libahci: Allow reconfigure of DEVSLP register ata: libahci: Correct setting of DEVSLP register ata: ahci: Enable DEVSLP by default on x86 with SLP_S0 ata: ahci: Support state with min power but Partial low power state Revert "ata: ahci_platform: convert kcalloc to devm_kcalloc" ata: sata_rcar: Add rudimentary Runtime PM support ata: sata_rcar: Provide a short-hand for &pdev->dev ata: Only output sg element mapped number in verbose debug ata: Guard ata_scsi_dump_cdb() by ATA_VERBOSE_DEBUG ata: ahci_platform: convert kcalloc to devm_kcalloc ata: ahci_platform: convert kzallloc to kcalloc ata: ahci_platform: correct parameter documentation for ahci_platform_shutdown libata: remove ata_sff_data_xfer_noirq() ...
2018-08-24Merge tag 'iommu-updates-v4.19' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull IOMMU updates from Joerg Roedel: - PASID table handling updates for the Intel VT-d driver. It implements a global PASID space now so that applications usings multiple devices will just have one PASID. - A new config option to make iommu passthroug mode the default. - New sysfs attribute for iommu groups to export the type of the default domain. - A debugfs interface (for debug only) usable by IOMMU drivers to export internals to user-space. - R-Car Gen3 SoCs support for the ipmmu-vmsa driver - The ARM-SMMU now aborts transactions from unknown devices and devices not attached to any domain. - Various cleanups and smaller fixes all over the place. * tag 'iommu-updates-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (42 commits) iommu/omap: Fix cache flushes on L2 table entries iommu: Remove the ->map_sg indirection iommu/arm-smmu-v3: Abort all transactions if SMMU is enabled in kdump kernel iommu/arm-smmu-v3: Prevent any devices access to memory without registration iommu/ipmmu-vmsa: Don't register as BUS IOMMU if machine doesn't have IPMMU-VMSA iommu/ipmmu-vmsa: Clarify supported platforms iommu/ipmmu-vmsa: Fix allocation in atomic context iommu: Add config option to set passthrough as default iommu: Add sysfs attribyte for domain type iommu/arm-smmu-v3: sync the OVACKFLG to PRIQ consumer register iommu/arm-smmu: Error out only if not enough context interrupts iommu/io-pgtable-arm-v7s: Abort allocation when table address overflows the PTE iommu/io-pgtable-arm: Fix pgtable allocation in selftest iommu/vt-d: Remove the obsolete per iommu pasid tables iommu/vt-d: Apply per pci device pasid table in SVA iommu/vt-d: Allocate and free pasid table iommu/vt-d: Per PCI device pasid table interfaces iommu/vt-d: Add for_each_device_domain() helper iommu/vt-d: Move device_domain_info to header iommu/vt-d: Apply global PASID in SVA ...
2018-08-24Merge branch 'next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux Pull thermal management updates from Zhang Rui: - Add Daniel Lezcano as the reviewer of thermal framework and SoC driver changes (Daniel Lezcano). - Fix a bug in intel_dts_soc_thermal driver, which does not translate IO-APIC GSI (Global System Interrupt) into Linux irq number (Hans de Goede). - For device tree bindings, allow cooling devices sharing same trip point with same contribution value to share cooling map (Viresh Kumar). * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: dt-bindings: thermal: Allow multiple devices to share cooling map MAINTAINERS: Add Daniel Lezcano as designated reviewer for thermal Thermal: Intel SoC DTS: Translate IO-APIC GSI number to linux irq number
2018-08-24arm64: dts: Fix various entry-method properties to reflect documentationAmit Kucheria
The idle-states binding documentation[1] mentions that the 'entry-method' property is required on 64-bit platforms and must be set to "psci". commit a13f18f59d26 ("Documentation: arm: Fix typo in the idle-states bindings examples") attempted to fix this earlier but clearly more is needed. Fix the cpu-capacity.txt documentation that uses the incorrect value so we don't get copy-paste errors like these. Clarify the language in idle-states.txt by removing the reference to the psci bindings that might be causing this confusion. Finally, fix devicetrees of various boards to reflect current documentation. [1] Documentation/devicetree/bindings/arm/idle-states.txt (see idle-states node) Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Acked-by: Sudeep Holla <sudeep.holla@arm.com> Acked-by: Li Yang <leoyang.li@nxp.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2018-08-24Merge tag 'reset-for-4.19-2' of git://git.pengutronix.de/git/pza/linux into ↵Olof Johansson
next/late Reset controller changes for v4.19, part 2 This adds a single new driver for the Amlogic Meson Audio Memory Arbiter resets. * tag 'reset-for-4.19-2' of git://git.pengutronix.de/git/pza/linux: reset: meson: add meson audio arb driver reset: meson: add dt-bindings for meson-axg audio arb Signed-off-by: Olof Johansson <olof@lixom.net>
2018-08-24Merge tag 'irqchip-4.19-2' of ↵Thomas Gleixner
git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/urgent Pull irqchip updates for 4.19, take #2 from Marc Zyngier: - bcm7038: compilation fix for !SMP - stm32: fix teardown on probe error - s3c24xx: fix compilation warning - renesas-irqc: r8a774a1 support - tango: chained irq setup simplification - gic-v3: allow wake-up sources
2018-08-24i2c: ocores: update my email addressPeter Korsgaard
The old @sunsite.dk address is no longer active, so update the references. Signed-off-by: Peter Korsgaard <peter@korsgaard.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-08-23Merge branch 'akpm' (patches from Andrew)Linus Torvalds
Merge yet more updates from Andrew Morton: - the rest of MM - various misc fixes and tweaks * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (22 commits) mm: Change return type int to vm_fault_t for fault handlers lib/fonts: convert comments to utf-8 s390: ebcdic: convert comments to UTF-8 treewide: convert ISO_8859-1 text comments to utf-8 drivers/gpu/drm/gma500/: change return type to vm_fault_t docs/core-api: mm-api: add section about GFP flags docs/mm: make GFP flags descriptions usable as kernel-doc docs/core-api: split memory management API to a separate file docs/core-api: move *{str,mem}dup* to "String Manipulation" docs/core-api: kill trailing whitespace in kernel-api.rst mm/util: add kernel-doc for kvfree mm/util: make strndup_user description a kernel-doc comment fs/proc/vmcore.c: hide vmcoredd_mmap_dumps() for nommu builds treewide: correct "differenciate" and "instanciate" typos fs/afs: use new return type vm_fault_t drivers/hwtracing/intel_th/msu.c: change return type to vm_fault_t mm: soft-offline: close the race against page allocation mm: fix race on soft-offlining free huge pages namei: allow restricted O_CREAT of FIFOs and regular files hfs: prevent crash on exit from failed search ...
2018-08-23treewide: convert ISO_8859-1 text comments to utf-8Arnd Bergmann
Almost all files in the kernel are either plain text or UTF-8 encoded. A couple however are ISO_8859-1, usually just a few characters in a C comments, for historic reasons. This converts them all to UTF-8 for consistency. Link: http://lkml.kernel.org/r/20180724111600.4158975-1-arnd@arndb.de Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Simon Horman <horms@verge.net.au> [IPVS portion] Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> [IIO] Acked-by: Michael Ellerman <mpe@ellerman.id.au> [powerpc] Acked-by: Rob Herring <robh@kernel.org> Cc: Joe Perches <joe@perches.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Samuel Ortiz <sameo@linux.intel.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Rob Herring <robh+dt@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-23docs/core-api: mm-api: add section about GFP flagsMike Rapoport
Link: http://lkml.kernel.org/r/1532626360-16650-8-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Matthew Wilcox <willy@infradead.org> Cc: Michal Hocko <mhocko@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-23docs/core-api: split memory management API to a separate fileMike Rapoport
This is basically copy-paste of the memory management section from kernel-api.rst with some minor adjustments: * The "User Space Memory Access" is moved to the beginning * The get_user_pages_fast reference is now a part of "User Space Memory Access" * And, of course, headings are adjusted with section being promoted to chapters Link: http://lkml.kernel.org/r/1532626360-16650-6-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Matthew Wilcox <willy@infradead.org> Cc: Michal Hocko <mhocko@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-23docs/core-api: move *{str,mem}dup* to "String Manipulation"Mike Rapoport
The string and memory duplication routines fit better to the "String Manipulation" section than to "The SLAB Cache". Link: http://lkml.kernel.org/r/1532626360-16650-5-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Matthew Wilcox <willy@infradead.org> Cc: Michal Hocko <mhocko@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-23docs/core-api: kill trailing whitespace in kernel-api.rstMike Rapoport
Link: http://lkml.kernel.org/r/1532626360-16650-4-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Matthew Wilcox <willy@infradead.org> Cc: Michal Hocko <mhocko@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-23treewide: correct "differenciate" and "instanciate" typosFinn Thain
Also add these typos to spelling.txt so checkpatch.pl will look for them. Link: http://lkml.kernel.org/r/88af06b9de34d870cb0afc46cfd24e0458be2575.1529471371.git.fthain@telegraphics.com.au Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-23namei: allow restricted O_CREAT of FIFOs and regular filesSalvatore Mesoraca
Disallows open of FIFOs or regular files not owned by the user in world writable sticky directories, unless the owner is the same as that of the directory or the file is opened without the O_CREAT flag. The purpose is to make data spoofing attacks harder. This protection can be turned on and off separately for FIFOs and regular files via sysctl, just like the symlinks/hardlinks protection. This patch is based on Openwall's "HARDEN_FIFO" feature by Solar Designer. This is a brief list of old vulnerabilities that could have been prevented by this feature, some of them even allow for privilege escalation: CVE-2000-1134 CVE-2007-3852 CVE-2008-0525 CVE-2009-0416 CVE-2011-4834 CVE-2015-1838 CVE-2015-7442 CVE-2016-7489 This list is not meant to be complete. It's difficult to track down all vulnerabilities of this kind because they were often reported without any mention of this particular attack vector. In fact, before hardlinks/symlinks restrictions, fifos/regular files weren't the favorite vehicle to exploit them. [s.mesoraca16@gmail.com: fix bug reported by Dan Carpenter] Link: https://lkml.kernel.org/r/20180426081456.GA7060@mwanda Link: http://lkml.kernel.org/r/1524829819-11275-1-git-send-email-s.mesoraca16@gmail.com [keescook@chromium.org: drop pr_warn_ratelimited() in favor of audit changes in the future] [keescook@chromium.org: adjust commit subjet] Link: http://lkml.kernel.org/r/20180416175918.GA13494@beast Signed-off-by: Salvatore Mesoraca <s.mesoraca16@gmail.com> Signed-off-by: Kees Cook <keescook@chromium.org> Suggested-by: Solar Designer <solar@openwall.com> Suggested-by: Kees Cook <keescook@chromium.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-23Merge tag 'pwm/for-4.19-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm Pull pwm updates from Thierry Reding: "This contains mostly minor bug fixes as well as some new chip support for existing drivers" * tag 'pwm/for-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: pwm: mediatek: Add MT7628 support dt-bindings: pwm: Add MT7628 information dt-bindings: pwm: rcar: Add bindings for R-Car E3 support pwm: meson: Fix mux clock names pwm: stm32-lp: Remove useless loop in stm32_pwm_lp_remove() pwm: omap-dmtimer: Return -EPROBE_DEFER if no dmtimer platform data pwm: mxs: Switch to SPDX identifier dt-bindings: pwm: fsl-ftm: Add compatible string for i.MX8QM pwm: fsl-ftm: Enable support for the new SoC i.MX8QM pwm: fsl-ftm: Added the support of per-compatible data pwm: fsl-ftm: Added a dedicated IP interface clock pwm: cros-ec: Switch to SPDX identifier pwm: imx: Switch to SPDX identifier pwm: tiehrpwm: Fix disabling of output of PWMs pwm: tiehrpwm: Don't use emulation mode bits to control PWM output pwm: berlin: Don't use broken prescaler values
2018-08-23Merge tag 'fbdev-v4.19' of https://github.com/bzolnier/linuxLinus Torvalds
Pull fbdev updates from Bartlomiej Zolnierkiewicz: "Mostly small fixes and cleanups for fb drivers (the biggest updates are for udlfb and pxafb drivers). This also adds deferred console takeover support to the console code and efifb driver. Summary: - add support for deferred console takeover, when enabled defers fbcon taking over the console from the dummy console until the first text is displayed on the console - together with the "quiet" kernel commandline option this allows fbcon to still be used together with a smooth graphical bootup (Hans de Goede) - improve console locking debugging code (Thomas Zimmermann) - copy the ACPI BGRT boot graphics to the framebuffer when deferred console takeover support is used in efifb driver (Hans de Goede) - update udlfb driver - fix lost console when the user unplugs a USB adapter, fix the screen corruption issue, fix locking and add some performance optimizations (Mikulas Patocka) - update pxafb driver - fix using uninitialized memory, switch to devm_* API, handle initialization errors and add support for lcd-supply regulator (Daniel Mack) - add support for boards booted with a DeviceTree in pxa3xx_gcu driver (Daniel Mack) - rename omap2 module to omap2fb.ko to avoid conflicts with omap1 driver (Arnd Bergmann) - enable ACPI-based enumeration for goldfishfb driver (Yu Ning) - fix goldfishfb driver to make user space Android code use 60 fps (Christoffer Dall) - print big fat warning when nomodeset kernel parameter is used in vgacon driver (Lyude Paul) - remove VLA usage from fsl-diu-fb driver (Kees Cook) - misc fixes (Julia Lawall, Geert Uytterhoeven, Fredrik Noring, Yisheng Xie, Dan Carpenter, Daniel Vetter, Anton Vasilyev, Randy Dunlap, Gustavo A. R. Silva, Colin Ian King, Fengguang Wu) - misc cleanups (Roman Kiryanov, Yisheng Xie, Colin Ian King)" * tag 'fbdev-v4.19' of https://github.com/bzolnier/linux: (54 commits) Documentation/fb: corrections for fbcon.txt fbcon: Do not takeover the console from atomic context dummycon: Stop exporting dummycon_[un]register_output_notifier fbcon: Only defer console takeover if the current console driver is the dummycon fbcon: Only allow FRAMEBUFFER_CONSOLE_DEFERRED_TAKEOVER if fbdev is builtin fbdev: omap2: omapfb: fix ifnullfree.cocci warnings fbdev: omap2: omapfb: fix bugon.cocci warnings fbdev: omap2: omapfb: fix boolreturn.cocci warnings fb: amifb: fix build warnings when not builtin fbdev/core: Disable console-lock warnings when fb.lockless_register_fb is set console: Replace #if 0 with atomic var 'ignore_console_lock_warning' udlfb: use spin_lock_irq instead of spin_lock_irqsave udlfb: avoid prefetch udlfb: optimization - test the backing buffer udlfb: allow reallocating the framebuffer udlfb: set line_length in dlfb_ops_set_par udlfb: handle allocation failure udlfb: set optimal write delay udlfb: make a local copy of fb_ops udlfb: don't switch if we are switching to the same videomode ...
2018-08-23Merge tag 'armsoc-dt' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM device-tree updates from Olof Johansson: "Business as usual -- the bulk of our changes are to devicetree files with new hardware support, new SoCs and platforms, and new board types. New SoCs/platforms: - Raspberry Pi Compute Module (CM1) and IO board - i.MX6SSL from NXP - Renesas RZ/N1D SoC (R9A06G032), Dual Cortex-A7 with Ethernet, CAN and PLC interfaces - TI AM654 SoC, Quad Cortex-A53, safety subsystem with Cortex-R5 controllers, communication and PRU subsystem and lots of other interfaces (PCIe, USB3, etc). New boards and systems: - Several Atmel at91-based boards from Laird - Marvell Armada388-based Helios4 board from SolidRun - Samsung Aires-based phones (s5pv210) - Allwinner A64-based Pinebook laptop In addition to the above, there's the usual amount of new devices described on existing platforms, fixes and tweaks and new minor variants of boards/platforms" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (478 commits) arm64: dts: sdm845: Add tsens nodes arm64: dts: msm8996: thermal: Initialise via DT and add second controller arm64: dts: sprd: Add one suspend timer arm64: dts: sprd: Add SC27XX ADC device arm64: dts: sprd: Add SC27XX eFuse device arm64: dts: sprd: Add SC27XX vibrator device arm64: dts: sprd: Add SC27XX breathing light controller device arm64: dts: meson-axg: add spdif-dit codec arm64: dts: meson-axg: add lineout codec arm64: dts: meson-axg: add linein codec arm64: dts: meson-axg: add tdm interfaces arm64: dts: meson-axg: add tdmout formatters arm64: dts: meson-axg: add tdmin formatters arm64: dts: meson-axg: add spdifout arm64: dts: rockchip: add led support for Firefly-RK3399 arm64: dts: rockchip: remove deprecated Type-C PHY properties on rk3399 arm64: dts: rockchip: add power button support for Firefly-RK3399 ARM: dts: aspeed: Add coprocessor interrupt controller arm64: dts: meson-axg: add audio arb reset controller arm64: dts: meson-axg: add usb power regulator ...
2018-08-23Merge tag 'armsoc-drivers' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver updates from Olof Johansson: "Some of the larger changes this merge window: - Removal of drivers for Exynos5440, a Samsung SoC that never saw widespread use. - Uniphier support for USB3 and SPI reset handling - Syste control and SRAM drivers and bindings for Allwinner platforms - Qualcomm AOSS (Always-on subsystem) reset controller drivers - Raspberry Pi hwmon driver for voltage - Mediatek pwrap (pmic) support for MT6797 SoC" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (52 commits) drivers/firmware: psci_checker: stash and use topology_core_cpumask for hotplug tests soc: fsl: cleanup Kconfig menu soc: fsl: dpio: Convert DPIO documentation to .rst staging: fsl-mc: Remove remaining files staging: fsl-mc: Move DPIO from staging to drivers/soc/fsl staging: fsl-dpaa2: eth: move generic FD defines to DPIO soc: fsl: qe: gpio: Add qe_gpio_set_multiple usb: host: exynos: Remove support for Exynos5440 clk: samsung: Remove support for Exynos5440 soc: sunxi: Add the A13, A23 and H3 system control compatibles reset: uniphier: add reset control support for SPI cpufreq: exynos: Remove support for Exynos5440 ata: ahci-platform: Remove support for Exynos5440 soc: imx6qp: Use GENPD_FLAG_ALWAYS_ON for PU errata soc: mediatek: pwrap: add mt6351 driver for mt6797 SoCs soc: mediatek: pwrap: add pwrap driver for mt6797 SoCs soc: mediatek: pwrap: fix cipher init setting error dt-bindings: pwrap: mediatek: add pwrap support for MT6797 reset: uniphier: add USB3 core reset control dt-bindings: reset: uniphier: add USB3 core reset support ...
2018-08-22Merge tag 'platform-drivers-x86-v4.19-1' of ↵Linus Torvalds
git://git.infradead.org/linux-platform-drivers-x86 Pull x86 platform driver updates from Andy Shevchenko: - The driver for Silead touchscreen configurations has been renamed from silead_dmi to touchscreen_dmi since it starts supporting other touchscreens which require some DMI quirks It also gets expanded to cover cases for Chuwi Vi10, ONDA V891W, Connect Tablet 9, Onda V820w, and Cube KNote i1101 tablets. - Another bunch of changes is related to Mellanox platform code to allow user space to communicate with Mellanox for system control and monitoring purposes. The driver notifies user on hotplug device signal receiving. - ASUS WMI drivers recognize lid flip action on UX360, and correctly toggles airplane mode LED. In addition the keyboard backlight toggle gets support. - ThinkPad ACPI driver enables support for calculator key (on at least P52). It also has been fixed to support three characters model designators, which are used for modern laptops. Earlier the battery, marked as BAT1, on ThinkPad laptops has not been configured properly, which is fixed. On the opposite the multi-battery configurations now probed correctly. - Dell SMBIOS driver starts working on some Dell servers which do not support token interface. The regression with backlight detection has also been fixed. In order to support dock mode on some laptops, Intel virtual button driver has been fixed. The last but not least is the fix to Intel HID driver due to changes in Dell systems that prevented to use power button. * tag 'platform-drivers-x86-v4.19-1' of git://git.infradead.org/linux-platform-drivers-x86: (47 commits) platform/x86: acer-wmi: Silence "unsupported" message a bit platform/x86: intel_punit_ipc: fix build errors platform/x86: ideapad: Add Y520-15IKBM and Y720-15IKBM to no_hw_rfkill platform/x86: asus-nb-wmi: Add keymap entry for lid flip action on UX360 platform/x86: acer-wmi: refactor function has_cap platform/x86: thinkpad_acpi: Fix multi-battery bug platform/x86: thinkpad_acpi: extend battery quirk coverage platform/x86: touchscreen_dmi: Add info for the Cube KNote i1101 tablet platform/x86: mlx-platform: Fix copy-paste error in mlxplat_init() platform/x86: mlx-platform: Remove unused define platform/x86: mlx-platform: Change mlxreg-io configuration for MSN274x systems Documentation/ABI: Add new attribute for mlxreg-io sysfs interfaces platform/x86: mlx-platform: Allow mlxreg-io driver activation for more systems platform/x86: mlx-platform: Add ASIC hotplug device configuration platform/mellanox: mlxreg-hotplug: Add hotplug hwmon uevent notification platform/mellanox: mlxreg-hotplug: Improve mechanism of ASIC health discovery platform/x86: mlx-platform: Add mlxreg-fan platform driver activation platform/x86: dell-laptop: Fix backlight detection platform/x86: toshiba_acpi: Fix defined but not used build warnings platform/x86: thinkpad_acpi: Support battery quirk ...
2018-08-22Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull second set of KVM updates from Paolo Bonzini: "ARM: - Support for Group0 interrupts in guests - Cache management optimizations for ARMv8.4 systems - Userspace interface for RAS - Fault path optimization - Emulated physical timer fixes - Random cleanups x86: - fixes for L1TF - a new test case - non-support for SGX (inject the right exception in the guest) - fix lockdep false positive" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (49 commits) KVM: VMX: fixes for vmentry_l1d_flush module parameter kvm: selftest: add dirty logging test kvm: selftest: pass in extra memory when create vm kvm: selftest: include the tools headers kvm: selftest: unify the guest port macros tools: introduce test_and_clear_bit KVM: x86: SVM: Call x86_spec_ctrl_set_guest/host() with interrupts disabled KVM: vmx: Inject #UD for SGX ENCLS instruction in guest KVM: vmx: Add defines for SGX ENCLS exiting x86/kvm/vmx: Fix coding style in vmx_setup_l1d_flush() x86: kvm: avoid unused variable warning KVM: Documentation: rename the capability of KVM_CAP_ARM_SET_SERROR_ESR KVM: arm/arm64: Skip updating PTE entry if no change KVM: arm/arm64: Skip updating PMD entry if no change KVM: arm: Use true and false for boolean values KVM: arm/arm64: vgic: Do not use spin_lock_irqsave/restore with irq disabled KVM: arm/arm64: vgic: Move DEBUG_SPINLOCK_BUG_ON to vgic.h KVM: arm: vgic-v3: Add support for ICC_SGI0R and ICC_ASGI1R accesses KVM: arm64: vgic-v3: Add support for ICC_SGI0R_EL1 and ICC_ASGI1R_EL1 accesses KVM: arm/arm64: vgic-v3: Add core support for Group0 SGIs ...
2018-08-22Merge tag 'f2fs-for-4.19' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs Pull f2fs updates from Jaegeuk Kim: "In this round, we've tuned f2fs to improve general performance by serializing block allocation and enhancing discard flows like fstrim which avoids user IO contention. And we've added fsync_mode=nobarrier which gives an option to user where it skips issuing cache_flush commands to underlying flash storage. And there are many bug fixes related to fuzzed images, revoked atomic writes, quota ops, and minor direct IO. Enhancements: - add fsync_mode=nobarrier which bypasses cache_flush command - enhance the discarding flow which avoids user IOs and issues in LBA order - readahead some encrypted blocks during GC - enable in-memory inode checksum to verify the blocks if F2FS_CHECK_FS is set - enhance nat_bits behavior - set -o discard by default - set REQ_RAHEAD to bio in ->readpages Bug fixes: - fix a corner case to corrupt atomic_writes revoking flow - revisit i_gc_rwsem to fix race conditions - fix some dio behaviors captured by xfstests - correct handling errors given by quota-related failures - add many sanity check flows to avoid fuzz test failures - add more error number propagation to their callers - fix several corner cases to continue fault injection w/ shutdown loop" * tag 'f2fs-for-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (89 commits) f2fs: readahead encrypted block during GC f2fs: avoid fi->i_gc_rwsem[WRITE] lock in f2fs_gc f2fs: fix performance issue observed with multi-thread sequential read f2fs: fix to skip verifying block address for non-regular inode f2fs: rework fault injection handling to avoid a warning f2fs: support fault_type mount option f2fs: fix to return success when trimming meta area f2fs: fix use-after-free of dicard command entry f2fs: support discard submission error injection f2fs: split discard command in prior to block layer f2fs: wake up gc thread immediately when gc_urgent is set f2fs: fix incorrect range->len in f2fs_trim_fs() f2fs: refresh recent accessed nat entry in lru list f2fs: fix avoid race between truncate and background GC f2fs: avoid race between zero_range and background GC f2fs: fix to do sanity check with block address in main area v2 f2fs: fix to do sanity check with inline flags f2fs: fix to reset i_gc_failures correctly f2fs: fix invalid memory access f2fs: fix to avoid broken of dnode block list ...
2018-08-22Merge branch 'akpm' (patches from Andrew)Linus Torvalds
Merge more updates from Andrew Morton: - the rest of MM - procfs updates - various misc things - more y2038 fixes - get_maintainer updates - lib/ updates - checkpatch updates - various epoll updates - autofs updates - hfsplus - some reiserfs work - fatfs updates - signal.c cleanups - ipc/ updates * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (166 commits) ipc/util.c: update return value of ipc_getref from int to bool ipc/util.c: further variable name cleanups ipc: simplify ipc initialization ipc: get rid of ids->tables_initialized hack lib/rhashtable: guarantee initial hashtable allocation lib/rhashtable: simplify bucket_table_alloc() ipc: drop ipc_lock() ipc/util.c: correct comment in ipc_obtain_object_check ipc: rename ipcctl_pre_down_nolock() ipc/util.c: use ipc_rcu_putref() for failues in ipc_addid() ipc: reorganize initialization of kern_ipc_perm.seq ipc: compute kern_ipc_perm.id under the ipc lock init/Kconfig: remove EXPERT from CHECKPOINT_RESTORE fs/sysv/inode.c: use ktime_get_real_seconds() for superblock stamp adfs: use timespec64 for time conversion kernel/sysctl.c: fix typos in comments drivers/rapidio/devices/rio_mport_cdev.c: remove redundant pointer md fork: don't copy inconsistent signal handler state to child signal: make get_signal() return bool signal: make sigkill_pending() return bool ...
2018-08-22ipc: reorganize initialization of kern_ipc_perm.seqManfred Spraul
ipc_addid() initializes kern_ipc_perm.seq after having called idr_alloc() (within ipc_idr_alloc()). Thus a parallel semop() or msgrcv() that uses ipc_obtain_object_check() may see an uninitialized value. The patch moves the initialization of kern_ipc_perm.seq before the calls of idr_alloc(). Notes: 1) This patch has a user space visible side effect: If /proc/sys/kernel/*_next_id is used (i.e.: checkpoint/restore) and if semget()/msgget()/shmget() fails in the final step of adding the id to the rhash tree, then .._next_id is cleared. Before the patch, is remained unmodified. There is no change of the behavior after a successful ..get() call: It always clears .._next_id, there is no impact to non checkpoint/restore code as that code does not use .._next_id. 2) The patch correctly documents that after a call to ipc_idr_alloc(), the full tear-down sequence must be used. The callers of ipc_addid() do not fullfill that, i.e. more bugfixes are required. The patch is a squash of a patch from Dmitry and my own changes. Link: http://lkml.kernel.org/r/20180712185241.4017-3-manfred@colorfullife.com Reported-by: syzbot+2827ef6b3385deb07eaf@syzkaller.appspotmail.com Signed-off-by: Manfred Spraul <manfred@colorfullife.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Kees Cook <keescook@chromium.org> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Davidlohr Bueso <dbueso@suse.de> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Michal Hocko <mhocko@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-22kernel/hung_task.c: allow to set checking interval separately from timeoutDmitry Vyukov
Currently task hung checking interval is equal to timeout, as the result hung is detected anywhere between timeout and 2*timeout. This is fine for most interactive environments, but this hurts automated testing setups (syzbot). In an automated setup we need to strictly order CPU lockup < RCU stall < workqueue lockup < task hung < silent loss, so that RCU stall is not detected as task hung and task hung is not detected as silent machine loss. The large variance in task hung detection timeout requires setting silent machine loss timeout to a very large value (e.g. if task hung is 3 mins, then silent loss need to be set to ~7 mins). The additional 3 minutes significantly reduce testing efficiency because usually we crash kernel within a minute, and this can add hours to bug localization process as it needs to do dozens of tests. Allow setting checking interval separately from timeout. This allows to set timeout to, say, 3 minutes, but checking interval to 10 secs. The interval is controlled via a new hung_task_check_interval_secs sysctl, similar to the existing hung_task_timeout_secs sysctl. The default value of 0 results in the current behavior: checking interval is equal to timeout. [akpm@linux-foundation.org: update hung_task_timeout_max's comment] Link: http://lkml.kernel.org/r/20180611111004.203513-1-dvyukov@google.com Signed-off-by: Dmitry Vyukov <dvyukov@google.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-22/proc/meminfo: add percpu populated pages countDennis Zhou (Facebook)
Currently, percpu memory only exposes allocation and utilization information via debugfs. This more or less is only really useful for understanding the fragmentation and allocation information at a per-chunk level with a few global counters. This is also gated behind a config. BPF and cgroup, for example, have seen an increase in use causing increased use of percpu memory. Let's make it easier for someone to identify how much memory is being used. This patch adds the "Percpu" stat to meminfo to more easily look up how much percpu memory is in use. This number includes the cost for all allocated backing pages and not just insight at the per a unit, per chunk level. Metadata is excluded. I think excluding metadata is fair because the backing memory scales with the numbere of cpus and can quickly outweigh the metadata. It also makes this calculation light. Link: http://lkml.kernel.org/r/20180807184723.74919-1-dennisszhou@gmail.com Signed-off-by: Dennis Zhou <dennisszhou@gmail.com> Acked-by: Tejun Heo <tj@kernel.org> Acked-by: Roman Gushchin <guro@fb.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: David Rientjes <rientjes@google.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Christoph Lameter <cl@linux.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-22mm, oom: introduce memory.oom.groupRoman Gushchin
For some workloads an intervention from the OOM killer can be painful. Killing a random task can bring the workload into an inconsistent state. Historically, there are two common solutions for this problem: 1) enabling panic_on_oom, 2) using a userspace daemon to monitor OOMs and kill all outstanding processes. Both approaches have their downsides: rebooting on each OOM is an obvious waste of capacity, and handling all in userspace is tricky and requires a userspace agent, which will monitor all cgroups for OOMs. In most cases an in-kernel after-OOM cleaning-up mechanism can eliminate the necessity of enabling panic_on_oom. Also, it can simplify the cgroup management for userspace applications. This commit introduces a new knob for cgroup v2 memory controller: memory.oom.group. The knob determines whether the cgroup should be treated as an indivisible workload by the OOM killer. If set, all tasks belonging to the cgroup or to its descendants (if the memory cgroup is not a leaf cgroup) are killed together or not at all. To determine which cgroup has to be killed, we do traverse the cgroup hierarchy from the victim task's cgroup up to the OOMing cgroup (or root) and looking for the highest-level cgroup with memory.oom.group set. Tasks with the OOM protection (oom_score_adj set to -1000) are treated as an exception and are never killed. This patch doesn't change the OOM victim selection algorithm. Link: http://lkml.kernel.org/r/20180802003201.817-4-guro@fb.com Signed-off-by: Roman Gushchin <guro@fb.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: David Rientjes <rientjes@google.com> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Tejun Heo <tj@kernel.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-22Documentation/sysctl/vm.txt: update __vm_enough_memory()'s pathjuviliu
__vm_enough_memory has moved to mm/util.c. Link: http://lkml.kernel.org/r/E18EDF4A4FA4A04BBFA824B6D7699E532A7E5913@EXMBX-SZMAIL013.tencent.com Signed-off-by: Juvi Liu <juviliu@tencent.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-22mm: clarify CONFIG_PAGE_POISONING and usageKees Cook
The Kconfig text for CONFIG_PAGE_POISONING doesn't mention that it has to be enabled explicitly. This updates the documentation for that and adds a note about CONFIG_PAGE_POISONING to the "page_poison" command line docs. While here, change description of CONFIG_PAGE_POISONING_ZERO too, as it's not "random" data, but rather the fixed debugging value that would be used when not zeroing. Additionally removes a stray "bool" in the Kconfig. Link: http://lkml.kernel.org/r/20180725223832.GA43733@beast Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Laura Abbott <labbott@redhat.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-22ata: libahci_platform: add reset control supportKunihiko Hayashi
Add support to get and control a list of resets for the device as optional and shared. These resets must be kept de-asserted until the device is enabled. This is specified as shared because some SoCs like UniPhier series have common reset controls with all ahci controller instances. However, according to Thierry's view, https://www.spinics.net/lists/linux-ide/msg55357.html some hardware-specific drivers already use their own resets, and the common reset make a path to occur double controls of resets. The ahci_platform_get_resources() can get and control the reset only when the second argument includes AHCI_PLATFORM_GET_RESETS bit. Suggested-by: Hans de Goede <hdegoede@redhat.com> Cc: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2018-08-22initramfs: move gen_initramfs_list.sh from scripts/ to usr/Masahiro Yamada
scripts/gen_initramfs_list.sh is only invoked from usr/Makefile. Move it so that all tools to create initramfs are self-contained in the usr/ directory. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-08-22kbuild: Fix LOADLIBES rename in Documentation/kbuild/makefiles.txtMichal Suchanek
Fixes: 8377bd2b9ee1 ("kbuild: Rename HOST_LOADLIBES to KBUILD_HOSTLDLIBS") Signed-off-by: Michal Suchanek <msuchanek@suse.de> Acked-by: Laura Abbott <labbott@redhat.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-08-22kconfig: report recursive dependency involving 'imply'Masahiro Yamada
Currently, Kconfig does not complain about the recursive dependency where 'imply' keywords are involved. [Test Code] config A bool "a" config B bool "b" imply A depends on A In the code above, Kconfig cannot calculate the symbol values correctly due to the circular dependency. For example, allyesconfig followed by syncconfig results in an odd behavior because CONFIG_B becomes visible in syncconfig. $ make allyesconfig scripts/kconfig/conf --allyesconfig Kconfig # # configuration written to .config # $ cat .config # # Automatically generated file; DO NOT EDIT. # Main menu # CONFIG_A=y $ make syncconfig scripts/kconfig/conf --syncconfig Kconfig * * Restart config... * * * Main menu * a (A) [Y/n/?] y b (B) [N/y/?] (NEW) To detect this correctly, sym_check_expr_deps() should recurse to not only sym->rev_dep.expr but also sym->implied.expr . At this moment, sym_check_print_recursive() cannot distinguish 'select' and 'imply' since it does not know the precise context where the recursive dependency has been hit. This will be solved by the next commit. In fact, even the document and the unit-test are confused. Using 'imply' does not solve recursive dependency since 'imply' addresses the unmet direct dependency, which 'select' could cause. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Tested-by: Dirk Gouders <dirk@gouders.net>
2018-08-22KVM: Documentation: rename the capability of KVM_CAP_ARM_SET_SERROR_ESRDongjiu Geng
In the documentation description, this capability's name is KVM_CAP_ARM_SET_SERROR_ESR, but in the header file this capability's name is KVM_CAP_ARM_INJECT_SERROR_ESR, so change the documentation description to make it same. Signed-off-by: Dongjiu Geng <gengdongjiu@huawei.com> Reported-by: Andrew Jones <drjones@redhat.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-08-22Merge tag 'kvmarm-for-v4.19' of ↵Paolo Bonzini
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD KVM/arm updates for 4.19 - Support for Group0 interrupts in guests - Cache management optimizations for ARMv8.4 systems - Userspace interface for RAS, allowing error retrival and injection - Fault path optimization - Emulated physical timer fixes - Random cleanups
2018-08-21Merge tag 'ovl-update-4.19' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs Pull overlayfs updates from Miklos Szeredi: "This contains two new features: - Stack file operations: this allows removal of several hacks from the VFS, proper interaction of read-only open files with copy-up, possibility to implement fs modifying ioctls properly, and others. - Metadata only copy-up: when file is on lower layer and only metadata is modified (except size) then only copy up the metadata and continue to use the data from the lower file" * tag 'ovl-update-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs: (66 commits) ovl: Enable metadata only feature ovl: Do not do metacopy only for ioctl modifying file attr ovl: Do not do metadata only copy-up for truncate operation ovl: add helper to force data copy-up ovl: Check redirect on index as well ovl: Set redirect on upper inode when it is linked ovl: Set redirect on metacopy files upon rename ovl: Do not set dentry type ORIGIN for broken hardlinks ovl: Add an inode flag OVL_CONST_INO ovl: Treat metacopy dentries as type OVL_PATH_MERGE ovl: Check redirects for metacopy files ovl: Move some dir related ovl_lookup_single() code in else block ovl: Do not expose metacopy only dentry from d_real() ovl: Open file with data except for the case of fsync ovl: Add helper ovl_inode_realdata() ovl: Store lower data inode in ovl_inode ovl: Fix ovl_getattr() to get number of blocks from lower ovl: Add helper ovl_dentry_lowerdata() to get lower data dentry ovl: Copy up meta inode data from lowest data inode ovl: Modify ovl_lookup() and friends to lookup metacopy dentry ...
2018-08-21Merge tag 'for-v4.19' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply Pull power supply and reset updates from Sebastian Reichel: - Improve support for TI bq20z75 in sbs-battery - Add Qualcomm PM8xxx reboot driver - Add cros-ec USBPD charger driver - Move ds2760 battery driver from w1 to power-supply and add DT support - Misc fixes * tag 'for-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (28 commits) power: supply: bq27xxx: Update comments power: supply: max77693_charger: fix unintentional fall-through power: supply: mark expected switch fall-throughs power: supply: lego_ev3_battery: fix Vce offset power: supply: lego_ev3_battery: Don't ignore iio_read_channel_processed() return value power: supply: ds2760_battery: add devicetree probing power: supply: ds2760_battery: merge ds2760 supply driver with its w1 slave companion w1: core: match sub-nodes of bus masters in devicetree dt-bindings: w1: document bindings for ds2760 battery monitor dt-bindings: w1: document generic onewire bindings power: supply: adp5061: Fix a couple off by ones dt-bindings: power: reset: qcom: Add resin binding adp5061: New driver for ADP5061 I2C battery charger power: generic-adc-battery: check for duplicate properties copied from iio channels power: generic-adc-battery: fix out-of-bounds write when copying channel properties power: supply: axp288_charger: Fix initial constant_charge_current value power: supply: ab8500: stop using getnstimeofday64() power: gemini-poweroff: Avoid more spurious poweroffs power: vexpress: fix corruption in notifier registration power: remove possible deadlock when unregistering power_supply ...
2018-08-21Merge branch 'i2c/for-4.19' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c updates from Wolfram Sang: - the core has now a lockless variant of i2c_smbus_xfer. Some open coded versions of this got removed in drivers. This also enables proper SCCB support in regmap. - locking got a more precise naming. i2c_{un}lock_adapter() had to go, and we know use i2c_lock_bus() consistently with flags like I2C_LOCK_ROOT_ADAPTER and I2C_LOCK_SEGMENT to avoid ambiguity. - the gpio fault injector got a new delicate testcase - the bus recovery procedure got fixed to handle the new testcase correctly - a new quirk flag for controllers not able to handle zero length messages together with driver updates to use it - new drivers: FSI bus attached I2C masters, GENI I2C controller, Owl family S900 - and a good set of driver improvements and bugfixes * 'i2c/for-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (77 commits) i2c: rcar: implement STOP and REP_START according to docs i2c: rcar: refactor private flags i2c: core: ACPI: Make acpi_gsb_i2c_read_bytes() check i2c_transfer return value i2c: core: ACPI: Properly set status byte to 0 for multi-byte writes dt-bindings: i2c: rcar: Add r8a774a1 support dt-bindings: i2c: sh_mobile: Add r8a774a1 support i2c: imx: Simplify stopped state tracking i2c: imx: Fix race condition in dma read i2c: pasemi: remove hardcoded bus numbers on smbus i2c: designware: Add SPDX license tag i2c: designware: Convert to use struct i2c_timings i2c: core: Parse SDA hold time from firmware i2c: designware-pcidrv: Mark expected switch fall-through i2c: amd8111: Mark expected switch fall-through i2c: sh_mobile: use core to detect 'no zero length read' quirk i2c: xlr: use core to detect 'no zero length' quirk i2c: rcar: use core to detect 'no zero length' quirk i2c: stu300: use core to detect 'no zero length' quirk i2c: pmcmsp: use core to detect 'no zero length' quirk i2c: mxs: use core to detect 'no zero length' quirk ...
2018-08-20f2fs: fix performance issue observed with multi-thread sequential readJaegeuk Kim
This reverts the commit - "b93f771 - f2fs: remove writepages lock" to fix the drop in sequential read throughput. Test: ./tiotest -t 32 -d /data/tio_tmp -f 32 -b 524288 -k 1 -k 3 -L device: UFS Before - read throughput: 185 MB/s total read requests: 85177 (of these ~80000 are 4KB size requests). total write requests: 2546 (of these ~2208 requests are written in 512KB). After - read throughput: 758 MB/s total read requests: 2417 (of these ~2042 are 512KB reads). total write requests: 2701 (of these ~2034 requests are written in 512KB). Signed-off-by: Sahitya Tummala <stummala@codeaurora.org> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-08-20Merge tag 'rtc-4.19' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux Pull RTC updates from Alexandre Belloni: "It is now possible to add custom sysfs attributes while avoiding a possible race condition. Unused code has been removed resulting in a nice reduction of the code base. And more drivers have been switched to SPDX by their maintainers. Summary: Subsystem: - new helpers to add custom sysfs attributes - struct rtc_task removal along with rtc_irq_[un]register() - rtc_irq_set_state and rtc_irq_set_freq are not exported anymore Drivers: - armada38x: reset after rtc power loss - ds1307: now supports m41t11 - isl1208: now supports isl1219 and tamper detection - pcf2127: internal SRAM support" * tag 'rtc-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (34 commits) rtc: ds1307: simplify hwmon config rtc: s5m: Add SPDX license identifier rtc: maxim: Add SPDX license identifiers rtc: isl1219: add device tree documentation rtc: isl1208: set ev-evienb bit from device tree rtc: isl1208: Add "evdet" interrupt source for isl1219 rtc: isl1208: add support for isl1219 with tamper detection rtc: sysfs: facilitate attribute add to rtc device rtc: remove struct rtc_task char: rtc: remove task handling rtc: pcf85063: preserve control register value between stop and start rtc: sh: remove unused variable rtc_dev rtc: unexport rtc_irq_set_* rtc: simplify rtc_irq_set_state/rtc_irq_set_freq rtc: remove irq_task and irq_task_lock rtc: remove rtc_irq_register/rtc_irq_unregister rtc: sh: remove dead code rtc: sa1100: don't set PIE frequency rtc: ds1307: support m41t11 variant rtc: ds1307: fix data pointer to m41t0 ...
2018-08-20Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid Pull HID updates from Jiri Kosina: - touch_max detection improvements and quirk handling fixes in wacom driver from Jason Gerecke and Ping Cheng - Palm rejection from Dmitry Torokhov and _dial support from Benjamin Tissoires for hid-multitouch driver - Low voltage support for i2c-hid driver from Stephen Boyd - Guitar-Hero support from Nicolas Adenis-Lamarre - other assorted small fixes and device ID additions * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (40 commits) HID: intel_ish-hid: tx_buf memory leak on probe/remove HID: intel-ish-hid: Prevent loading of driver on Mehlow HID: cougar: Add support for the Cougar 500k Gaming Keyboard HID: cougar: make compare_device_paths reusable HID: intel-ish-hid: remove redundant variable num_frags HID: multitouch: handle palm for touchscreens HID: multitouch: touchscreens also use confidence reports HID: multitouch: report MT_TOOL_PALM for non-confident touches HID: microsoft: support the Surface Dial HID: core: do not upper bound the collection stack HID: input: enable Totem on the Dell Canvas 27 HID: multitouch: remove one copy of values HID: multitouch: ditch mt_report_id HID: multitouch: store a per application quirks value HID: multitouch: Store per collection multitouch data HID: multitouch: make sure the static list of class is not changed input: add MT_TOOL_DIAL HID: elan: Add support for touchpad on the Toshiba Click Mini L9W HID: elan: Add USB-id for HP x2 10-n000nd touchpad HID: elan: Add a flag for selecting if the touchpad has a LED ...
2018-08-20Merge tag 'backlight-next-4.19' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight Pull backlight updates from Lee Jones: "Core Framework: - Remove unused/obsolete code/comments New Functionality: - Allow less granular brightness specification for high-res PWMs; pwm_bl - Align brightness {inc,dec}rements with that perceived by the human-eye; pwm_bl Fix-ups: - Prepare for the introduction of -Wimplicit-fall-through; adp8860_bl Bug Fixes: - Fix uninitialised variable; pwm_bl" * tag 'backlight-next-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight: backlight: pwm_bl: Fix uninitialized variable backlight: adp8860: Mark expected switch fall-through backlight: Remove obsolete comment for ->state dt-bindings: pwm-backlight: Move brightness-levels to optional backlight: pwm_bl: Compute brightness of LED linearly to human eye dt-bindings: pwm-backlight: Add a num-interpolation-steps property backlight: pwm_bl: Linear interpolation between brightness-levels
2018-08-20Merge tag 'mfd-next-4.19' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: "New Drivers: - Add Cirrus Logic Madera Codec (CS47L35, CS47L85 and CS47L90/91) driver - Add ChromeOS EC CEC driver - Add ROHM BD71837 PMIC driver New Device Support: - Add support for Dialog Semi DA9063L PMIC variant to DA9063 - Add support for Intel Ice Lake to Intel-PLSS-PCI - Add support for X-Powers AXP806 to AXP20x New Functionality: - Add support for USB Charging to the ChromeOS Embedded Controller - Add support for HDMI CEC to the ChromeOS Embedded Controller - Add support for HDMI CEC to Intel HDMI - Add support for accessory detection to Madera devices - Allow individual pins to be configured via DT' wlf,csnaddr-pd - Provide legacy platform specific EEPROM/Watchdog commands; rave-sp Fix-upsL - Trivial renaming/spelling fixes; cros_ec, da9063-* - Convert to Managed Resources (devm_*); da9063-*, ti_am335x_tscadc - Transition to helper macros/functions; da9063-* - Constify; kempld-core - Improve error path/messages; wm8994-core - Disable IRQs locally instead of relying on USB subsystem; dln2 - Remove unused code; rave-sp - New exports; sec-core Bug Fixes: - Fix possible false I2C transaction error; arizona-core - Fix declared memory area size; hi655x-pmic - Fix checksum type; rave-sp - Fix incorrect default serial port configuration: rave-sp - Fix incorrect coherent DMA mask for sub-devices; sm501" * tag 'mfd-next-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (60 commits) mfd: madera: Add register definitions for accessory detect mfd: sm501: Set coherent_dma_mask when creating subdevices mfd: bd71837: Devicetree bindings for ROHM BD71837 PMIC mfd: bd71837: Core driver for ROHM BD71837 PMIC media: platform: cros-ec-cec: Fix dependency on MFD_CROS_EC mfd: sec-core: Export OF module alias table mfd: as3722: Disable auto-power-on when AC OK mfd: axp20x: Support AXP806 in I2C mode mfd: axp20x: Add self-working mode support for AXP806 dt-bindings: mfd: axp20x: Add "self-working" mode for AXP806 mfd: wm8994: Allow to configure CS/ADDR Pulldown from dts mfd: wm8994: Allow to configure Speaker Mode Pullup from dts mfd: rave-sp: Emulate CMD_GET_STATUS on device that don't support it mfd: rave-sp: Add legacy watchdog ping command translation mfd: rave-sp: Add legacy EEPROM access command translation mfd: rave-sp: Initialize flow control and parity of the port mfd: rave-sp: Fix incorrectly specified checksum type mfd: rave-sp: Remove unused defines mfd: hi655x: Fix regmap area declared size for hi655x mfd: ti_am335x_tscadc: Fix struct clk memory leak ...
2018-08-20Raise the minimum required gcc version to 4.6Joe Perches
Various architectures fail to build properly with older versions of the gcc compiler. An example from Guenter Roeck in thread [1]: > > In file included from ./include/linux/mm.h:17:0, > from ./include/linux/pid_namespace.h:7, > from ./include/linux/ptrace.h:10, > from arch/openrisc/kernel/asm-offsets.c:32: > ./include/linux/mm_types.h:497:16: error: flexible array member in otherwise empty struct > > This is just an example with gcc 4.5.1 for or32. I have seen the problem > with gcc 4.4 (for unicore32) as well. So update the minimum required version of gcc to 4.6. [1] https://lore.kernel.org/lkml/20180814170904.GA12768@roeck-us.net/ Miscellanea: - Update Documentation/process/changes.rst - Remove and consolidate version test blocks in compiler-gcc.h for versions lower than 4.6 Signed-off-by: Joe Perches <joe@perches.com> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-20Merge branch 'for-4.19/multitouch-multiaxis' into for-linusJiri Kosina
Multitouch updates: - Dial support - Palm rejection for touchscreens - a few small assorted fixes
2018-08-20Merge branch 'for-4.19/i2c-hid' into for-linusJiri Kosina
Low voltage support for i2c-hid
2018-08-20dt-bindings: i2c: rcar: Add r8a774a1 supportFabrizio Castro
Document RZ/G2M (R8A774A1) I2C compatibility with the relevant driver dt-bindings. Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>