summaryrefslogtreecommitdiff
path: root/Documentation
AgeCommit message (Collapse)Author
2017-03-14Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: 1) Ensure that mtu is at least IPV6_MIN_MTU in ipv6 VTI tunnel driver, from Steffen Klassert. 2) Fix crashes when user tries to get_next_key on an LPM bpf map, from Alexei Starovoitov. 3) Fix detection of VLAN fitlering feature for bnx2x VF devices, from Michal Schmidt. 4) We can get a divide by zero when TCP socket are morphed into listening state, fix from Eric Dumazet. 5) Fix socket refcounting bugs in skb_complete_wifi_ack() and skb_complete_tx_timestamp(). From Eric Dumazet. 6) Use after free in dccp_feat_activate_values(), also from Eric Dumazet. 7) Like bonding team needs to use ETH_MAX_MTU as netdev->max_mtu, from Jarod Wilson. 8) Fix use after free in vrf_xmit(), from David Ahern. 9) Don't do UDP Fragmentation Offload on IPComp ipsec packets, from Alexey Kodanev. 10) Properly check napi_complete_done() return value in order to decide whether to re-enable IRQs or not in amd-xgbe driver, from Thomas Lendacky. 11) Fix double free of hwmon device in marvell phy driver, from Andrew Lunn. 12) Don't crash on malformed netlink attributes in act_connmark, from Etienne Noss. 13) Don't remove routes with a higher metric in ipv6 ECMP route replace, from Sabrina Dubroca. 14) Don't write into a cloned SKB in ipv6 fragmentation handling, from Florian Westphal. 15) Fix routing redirect races in dccp and tcp, basically the ICMP handler can't modify the socket's cached route in it's locked by the user at this moment. From Jon Maxwell. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (108 commits) qed: Enable iSCSI Out-of-Order qed: Correct out-of-bound access in OOO history qed: Fix interrupt flags on Rx LL2 qed: Free previous connections when releasing iSCSI qed: Fix mapping leak on LL2 rx flow qed: Prevent creation of too-big u32-chains qed: Align CIDs according to DORQ requirement mlxsw: reg: Fix SPVMLR max record count mlxsw: reg: Fix SPVM max record count net: Resend IGMP memberships upon peer notification. dccp: fix memory leak during tear-down of unsuccessful connection request tun: fix premature POLLOUT notification on tun devices dccp/tcp: fix routing redirect race ucc/hdlc: fix two little issue vxlan: fix ovs support net: use net->count to check whether a netns is alive or not bridge: drop netfilter fake rtable unconditionally ipv6: avoid write to a possibly cloned skb net: wimax/i2400m: fix NULL-deref at probe isdn/gigaset: fix NULL-deref at probe ...
2017-03-14Merge branch 'for-4.11-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup Pull cgroup fixes from Tejun Heo: "Three cgroup fixes. Nothing critical: - the pids controller could trigger suspicious RCU warning spuriously. Fixed. - in the debug controller, %p -> %pK to protect kernel pointer from getting exposed. - documentation formatting fix" * 'for-4.11-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: cgroups: censor kernel pointer in debug files cgroup/pids: remove spurious suspicious RCU usage warning cgroup: Fix indenting in PID controller documentation
2017-03-12Make IP 'forwarding' doc more preciseNeil Jerram
It wasn't clear if the 'forwarding' setting needs to be enabled on the interface that packets are received from, or on the interface that packets are forwarded to, or both. In fact (according to my code reading) the setting is relevant on the interface that packets are received from, so this change updates the doc to say that. Signed-off-by: Neil Jerram <neil@tigera.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-12Merge branch 'irq-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fixes from Thomas Gleixner: - a workaround for a GIC erratum - a missing stub function for CONFIG_IRQDOMAIN=n - fixes for a couple of type inconsistencies * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/crossbar: Fix incorrect type of register size irqchip/gicv3-its: Add workaround for QDF2400 ITS erratum 0065 irqdomain: Add empty irq_domain_check_msi_remap irqchip/crossbar: Fix incorrect type of local variables
2017-03-11Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull KVM fixes from Radim Krčmář: "ARM updates from Marc Zyngier: - vgic updates: - Honour disabling the ITS - Don't deadlock when deactivating own interrupts via MMIO - Correctly expose the lact of IRQ/FIQ bypass on GICv3 - I/O virtualization: - Make KVM_CAP_NR_MEMSLOTS big enough for large guests with many PCIe devices - General bug fixes: - Gracefully handle exception generated with syndroms that the host doesn't understand - Properly invalidate TLBs on VHE systems x86: - improvements in emulation of VMCLEAR, VMX MSR bitmaps, and VCPU reset * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: nVMX: do not warn when MSR bitmap address is not backed KVM: arm64: Increase number of user memslots to 512 KVM: arm/arm64: Remove KVM_PRIVATE_MEM_SLOTS definition that are unused KVM: arm/arm64: Enable KVM_CAP_NR_MEMSLOTS on arm/arm64 KVM: Add documentation for KVM_CAP_NR_MEMSLOTS KVM: arm/arm64: VGIC: Fix command handling while ITS being disabled arm64: KVM: Survive unknown traps from guests arm: KVM: Survive unknown traps from guests KVM: arm/arm64: Let vcpu thread modify its own active state KVM: nVMX: reset nested_run_pending if the vCPU is going to be reset kvm: nVMX: VMCLEAR should not cause the vCPU to shut down KVM: arm/arm64: vgic-v3: Don't pretend to support IRQ/FIQ bypass arm64: KVM: VHE: Clear HCR_TGE when invalidating guest TLBs
2017-03-11Merge tag 'usb-4.11-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here is a number of different USB fixes for 4.11-rc2. Seems like there were a lot of unresolved issues that people have been finding for this subsystem, and a bunch of good security auditing happening as well from Johan Hovold. There's the usual batch of gadget driver fixes and xhci issues resolved as well. All of these have been in linux-next with no reported issues" * tag 'usb-4.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (35 commits) usb: host: xhci-plat: Fix timeout on removal of hot pluggable xhci controllers usb: host: xhci-dbg: HCIVERSION should be a binary number usb: xhci: remove dummy extra_priv_size for size of xhci_hcd struct usb: xhci-mtk: check hcc_params after adding primary hcd USB: serial: digi_acceleport: fix OOB-event processing MAINTAINERS: usb251xb: remove reference inexistent file doc: dt-bindings: usb251xb: mark reg as required usb: usb251xb: dt: add unit suffix to oc-delay and power-on-time usb: usb251xb: remove max_{power,current}_{sp,bp} properties usb-storage: Add ignore-residue quirk for Initio INIC-3619 USB: iowarrior: fix NULL-deref in write USB: iowarrior: fix NULL-deref at probe usb: phy: isp1301: Add OF device ID table usb: ohci-at91: Do not drop unhandled USB suspend control requests USB: serial: safe_serial: fix information leak in completion handler USB: serial: io_ti: fix information leak in completion handler USB: serial: omninet: drop open callback USB: serial: omninet: fix reference leaks at open USB: serial: io_ti: fix NULL-deref in interrupt callback usb: dwc3: gadget: make to increment req->remaining in all cases ...
2017-03-10Merge branch 'akpm' (patches from Andrew)Linus Torvalds
Merge fixes from Andrew Morton: "26 fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (26 commits) userfaultfd: remove wrong comment from userfaultfd_ctx_get() fat: fix using uninitialized fields of fat_inode/fsinfo_inode sh: cayman: IDE support fix kasan: fix races in quarantine_remove_cache() kasan: resched in quarantine_remove_cache() mm: do not call mem_cgroup_free() from within mem_cgroup_alloc() thp: fix another corner case of munlock() vs. THPs rmap: fix NULL-pointer dereference on THP munlocking mm/memblock.c: fix memblock_next_valid_pfn() userfaultfd: selftest: vm: allow to build in vm/ directory userfaultfd: non-cooperative: userfaultfd_remove revalidate vma in MADV_DONTNEED userfaultfd: non-cooperative: fix fork fctx->new memleak mm/cgroup: avoid panic when init with low memory drivers/md/bcache/util.h: remove duplicate inclusion of blkdev.h mm/vmstats: add thp_split_pud event for clarity include/linux/fs.h: fix unsigned enum warning with gcc-4.2 userfaultfd: non-cooperative: release all ctx in dup_userfaultfd_complete userfaultfd: non-cooperative: robustness check userfaultfd: non-cooperative: rollback userfaultfd_exit x86, mm: unify exit paths in gup_pte_range() ...
2017-03-09userfaultfd: non-cooperative: rollback userfaultfd_exitAndrea Arcangeli
Patch series "userfaultfd non-cooperative further update for 4.11 merge window". Unfortunately I noticed one relevant bug in userfaultfd_exit while doing more testing. I've been doing testing before and this was also tested by kbuild bot and exercised by the selftest, but this bug never reproduced before. I dropped userfaultfd_exit as result. I dropped it because of implementation difficulty in receiving signals in __mmput and because I think -ENOSPC as result from the background UFFDIO_COPY should be enough already. Before I decided to remove userfaultfd_exit, I noticed userfaultfd_exit wasn't exercised by the selftest and when I tried to exercise it, after moving it to a more correct place in __mmput where it would make more sense and where the vma list is stable, it resulted in the event_wait_completion in D state. So then I added the second patch to be sure even if we call userfaultfd_event_wait_completion too late during task exit(), we won't risk to generate tasks in D state. The same check exists in handle_userfault() for the same reason, except it makes a difference there, while here is just a robustness check and it's run under WARN_ON_ONCE. While looking at the userfaultfd_event_wait_completion() function I looked back at its callers too while at it and I think it's not ok to stop executing dup_fctx on the fcs list because we relay on userfaultfd_event_wait_completion to execute userfaultfd_ctx_put(fctx->orig) which is paired against userfaultfd_ctx_get(fctx->orig) in dup_userfault just before list_add(fcs). This change only takes care of fctx->orig but this area also needs further review looking for similar problems in fctx->new. The only patch that is urgent is the first because it's an use after free during a SMP race condition that affects all processes if CONFIG_USERFAULTFD=y. Very hard to reproduce though and probably impossible without SLUB poisoning enabled. This patch (of 3): I once reproduced this oops with the userfaultfd selftest, it's not easily reproducible and it requires SLUB poisoning to reproduce. general protection fault: 0000 [#1] SMP Modules linked in: CPU: 2 PID: 18421 Comm: userfaultfd Tainted: G ------------ T 3.10.0+ #15 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.10.1-0-g8891697-prebuilt.qemu-project.org 04/01/2014 task: ffff8801f83b9440 ti: ffff8801f833c000 task.ti: ffff8801f833c000 RIP: 0010:[<ffffffff81451299>] [<ffffffff81451299>] userfaultfd_exit+0x29/0xa0 RSP: 0018:ffff8801f833fe80 EFLAGS: 00010202 RAX: ffff8801f833ffd8 RBX: 6b6b6b6b6b6b6b6b RCX: ffff8801f83b9440 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff8800baf18600 RBP: ffff8801f833fee8 R08: 0000000000000000 R09: 0000000000000001 R10: 0000000000000000 R11: ffffffff8127ceb3 R12: 0000000000000000 R13: ffff8800baf186b0 R14: ffff8801f83b99f8 R15: 00007faed746c700 FS: 0000000000000000(0000) GS:ffff88023fc80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 00007faf0966f028 CR3: 0000000001bc6000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Call Trace: do_exit+0x297/0xd10 SyS_exit+0x17/0x20 tracesys+0xdd/0xe2 Code: 00 00 66 66 66 66 90 55 48 89 e5 41 54 53 48 83 ec 58 48 8b 1f 48 85 db 75 11 eb 73 66 0f 1f 44 00 00 48 8b 5b 10 48 85 db 74 64 <4c> 8b a3 b8 00 00 00 4d 85 e4 74 eb 41 f6 84 24 2c 01 00 00 80 RIP [<ffffffff81451299>] userfaultfd_exit+0x29/0xa0 RSP <ffff8801f833fe80> ---[ end trace 9fecd6dcb442846a ]--- In the debugger I located the "mm" pointer in the stack and walking mm->mmap->vm_next through the end shows the vma->vm_next list is fully consistent and it is null terminated list as expected. So this has to be an SMP race condition where userfaultfd_exit was running while the vma list was being modified by another CPU. When userfaultfd_exit() run one of the ->vm_next pointers pointed to SLAB_POISON (RBX is the vma pointer and is 0x6b6b..). The reason is that it's not running in __mmput but while there are still other threads running and it's not holding the mmap_sem (it can't as it has to wait the even to be received by the manager). So this is an use after free that was happening for all processes. One more implementation problem aside from the race condition: userfaultfd_exit has really to check a flag in mm->flags before walking the vma or it's going to slowdown the exit() path for regular tasks. One more implementation problem: at that point signals can't be delivered so it would also create a task in D state if the manager doesn't read the event. The major design issue: it overall looks superfluous as the manager can check for -ENOSPC in the background transfer: if (mmget_not_zero(ctx->mm)) { [..] } else { return -ENOSPC; } It's safer to roll it back and re-introduce it later if at all. [rppt@linux.vnet.ibm.com: documentation fixup after removal of UFFD_EVENT_EXIT] Link: http://lkml.kernel.org/r/1488345437-4364-1-git-send-email-rppt@linux.vnet.ibm.com Link: http://lkml.kernel.org/r/20170224181957.19736-2-aarcange@redhat.com Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Acked-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-03-09scripts/spelling.txt: add "overide" pattern and fix typo instancesMasahiro Yamada
Fix typos and add the following to the scripts/spelling.txt: overide||override While we are here, fix the doubled "address" in the touched line Documentation/devicetree/bindings/regulator/ti-abb-regulator.txt. Also, fix the comment block style in the touched hunks in drivers/media/dvb-frontends/drx39xyj/drx_driver.h. Link: http://lkml.kernel.org/r/1481573103-11329-21-git-send-email-yamada.masahiro@socionext.com Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-03-09scripts/spelling.txt: add "disble(d)" pattern and fix typo instancesMasahiro Yamada
Fix typos and add the following to the scripts/spelling.txt: disble||disable disbled||disabled I kept the TSL2563_INT_DISBLED in /drivers/iio/light/tsl2563.c untouched. The macro is not referenced at all, but this commit is touching only comment blocks just in case. Link: http://lkml.kernel.org/r/1481573103-11329-20-git-send-email-yamada.masahiro@socionext.com Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-03-09Merge tag 'pm-4.11-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fixes from Rafael Wysocki: "These fix several issues in the intel_pstate driver and one issue in the schedutil cpufreq governor, clean up that governor a bit and hook up existing code for disabling cpufreq to a new kernel command line option. Specifics: - Three fixes for intel_pstate problems related to the passive mode (in which it acts as a regular cpufreq scaling driver), two for the handling of global P-state limits and one for the handling of the cpu_frequency tracepoint in that mode (Rafael Wysocki). - Three fixes for the handling of P-state limits in intel_pstate in the active mode (Rafael Wysocki). - Introduction of a new cpufreq.off=1 kernel command line argument that will disable cpufreq entirely if passed to the kernel and is simply hooked up to the existing code used by Xen (Len Brown). - Fix for the schedutil cpufreq governor to prevent it from using stale raw frequency values in configurations with mutiple CPUs sharing one policy object and a cleanup for it reducing its overhead slightly (Viresh Kumar)" * tag 'pm-4.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpufreq: intel_pstate: Do not reinit performance limits in ->setpolicy cpufreq: intel_pstate: Fix intel_pstate_verify_policy() cpufreq: intel_pstate: Fix global settings in active mode cpufreq: Add the "cpufreq.off=1" cmdline option cpufreq: schedutil: Pass sg_policy to get_next_freq() cpufreq: schedutil: move cached_raw_freq to struct sugov_policy cpufreq: intel_pstate: Avoid triggering cpu_frequency tracepoint unnecessarily cpufreq: intel_pstate: Fix intel_cpufreq_verify_policy() cpufreq: intel_pstate: Do not use performance_limits in passive mode
2017-03-09Merge branch 'pm-cpufreq'Rafael J. Wysocki
* pm-cpufreq: cpufreq: intel_pstate: Do not reinit performance limits in ->setpolicy cpufreq: intel_pstate: Fix intel_pstate_verify_policy() cpufreq: intel_pstate: Fix global settings in active mode cpufreq: Add the "cpufreq.off=1" cmdline option cpufreq: intel_pstate: Avoid triggering cpu_frequency tracepoint unnecessarily cpufreq: intel_pstate: Fix intel_cpufreq_verify_policy() cpufreq: intel_pstate: Do not use performance_limits in passive mode
2017-03-09doc: dt-bindings: usb251xb: mark reg as requiredRichard Leitner
Mark the reg property as required and furthermore fix some typos and spellings in the documentation. Signed-off-by: Richard Leitner <richard.leitner@skidata.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-09usb: usb251xb: dt: add unit suffix to oc-delay and power-on-timeRichard Leitner
Rename oc-delay-* to oc-delay-us and make it expect a time value. Furthermore add -ms suffix to power-on-time. There changes were suggested by Rob Herring in https://lkml.org/lkml/2017/2/15/1283. Signed-off-by: Richard Leitner <richard.leitner@skidata.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-09usb: usb251xb: remove max_{power,current}_{sp,bp} propertiesRichard Leitner
Remove the max_{power,current}_{sp,bp} properties of the usb251xb driver from devicetree. This is done to simplify the dt bindings as requested by Rob Herring in https://lkml.org/lkml/2017/2/15/1283. If those properties are ever needed by somebody they can be enabled again easily. Signed-off-by: Richard Leitner <richard.leitner@skidata.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-09KVM: Add documentation for KVM_CAP_NR_MEMSLOTSLinu Cherian
Add documentation for KVM_CAP_NR_MEMSLOTS capability. Reviewed-by: Christoffer Dall <cdall@linaro.org> Signed-off-by: Linu Cherian <linu.cherian@cavium.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-03-07Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Ingo Molnar: "This includes a fix for a crash if certain special addresses are kprobed, plus does a rename of two Kconfig variables that were a minor misnomer" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/core: Rename CONFIG_[UK]PROBE_EVENT to CONFIG_[UK]PROBE_EVENTS kprobes/x86: Fix kernel panic when certain exception-handling addresses are probed
2017-03-07dt: emac: document device-tree based phy discovery and setupChristian Lamparter
This patch adds documentation for a new "phy-handle" property, "fixed-link" and "mdio" sub-node. These allows the enumeration of PHYs which are supported by the phy library under drivers/net/phy. The EMAC ethernet controller in IBM and AMCC 4xx chips is currently stuck with a few privately defined phy implementations. It has no support for PHYs which are supported by the generic phylib. Acked-by: Rob Herring <robh@kernel.org> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-07Merge tag 'trace-v4.11-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing fixes from Steven Rostedt: "There was some breakage with the changes for jump labels in the 4.11 merge window: - powerpc broke as jump labels uses the two LSB bits as flags in initialization. A check was added to make sure that all jump label entries were 4 bytes aligned, but powerpc didn't work that way for modules. Adding an alignment in the module linker script appeared to be the best solution. - Jump labels also added an anonymous union to access those LSB bits as a normal long. But because this structure had static initialization, it broke older compilers that could not statically initialize anonymous unions without brackets. - The command line parameter for setting function graph filter broke the "EMPTY_HASH" descriptor by modifying it instead of creating a new hash to hold the entries. - The command line parameter ftrace_graph_max_depth was added to allow its setting at boot time. It uses existing code and only the command line hook was added. This is not really a fix, but as it uses existing code without affecting anything else, I added it to this release. It was ready before the merge window closed, but I wanted to let it sit in linux-next for a couple of days first" * tag 'trace-v4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: ftrace/graph: Add ftrace_graph_max_depth kernel parameter tracing: Add #undef to fix compile error jump_label: Add comment about initialization order for anonymous unions jump_label: Fix anonymous union initialization module: set __jump_table alignment to 8 ftrace/graph: Do not modify the EMPTY_HASH for the function_graph filter tracing: Fix code comment for ftrace_ops_get_func()
2017-03-07irqchip/gicv3-its: Add workaround for QDF2400 ITS erratum 0065Shanker Donthineni
On Qualcomm Datacenter Technologies QDF2400 SoCs, the ITS hardware implementation uses 16Bytes for Interrupt Translation Entry (ITE), but reports an incorrect value of 8Bytes in GITS_TYPER.ITTE_size. It might cause kernel memory corruption depending on the number of MSI(x) that are configured and the amount of memory that has been allocated for ITEs in its_create_device(). This patch fixes the potential memory corruption by setting the correct ITE size to 16Bytes. Cc: stable@vger.kernel.org Signed-off-by: Shanker Donthineni <shankerd@codeaurora.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-03-06cgroup: Fix indenting in PID controller documentationTobias Klauser
Follow the common documentation style in the file and indent the interface file description by a tab instead of just a space. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: Tejun Heo <tj@kernel.org>
2017-03-06cpufreq: Add the "cpufreq.off=1" cmdline optionLen Brown
Add the "cpufreq.off=1" cmdline option. At boot-time, this allows a user to request CONFIG_CPU_FREQ=n behavior from a kernel built with CONFIG_CPU_FREQ=y. This is analogous to the existing "cpuidle.off=1" option and CONFIG_CPU_IDLE=y This capability is valuable when we need to debug end-user issues in the BIOS or in Linux. It is also convenient for enabling comparisons, which may otherwise require a new kernel, or help from BIOS SETUP, which may be buggy or unavailable. Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-03-04Merge tag 'docs-4.11-fixes' of git://git.lwn.net/linuxLinus Torvalds
Pull documentation fixes from Jonathan Corbet: "A few fixes for the docs tree, including one for a 4.11 build regression" * tag 'docs-4.11-fixes' of git://git.lwn.net/linux: Documentation/sphinx: fix primary_domain configuration docs: Fix htmldocs build failure doc/ko_KR/memory-barriers: Update control-dependencies section pcieaer doc: update the link Documentation: Update path to sysrq.txt
2017-03-03Merge tag 'armsoc-late' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC late DT updates from Arnd Bergmann: "These updates have been kept in a separate branch mostly because they rely on updates to the respective clk drivers to keep the shared header files in sync. This includes two branches for arm64 dt updates, both following up on earlier changes for the same platforms that are already merged: Samsung: - add USB3 support in Exynos7 - minor PM related updates Amlogic: - new machines: WeTek Set-top-boxes - various devices added to DT There are also a couple of bugfixes that trickled in since the start of the merge window: - The moxart_defconfig was not building the intended platform - CPU-hotplug was broken on ux500 - Coresight was broken on Juno (never worked)" * tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (26 commits) ARM: deconfig: fix the moxart defconfig ARM: ux500: resume the second core properly arm64: dts: juno: update definition for programmable replicator arm64: dts: exynos: Add regulators for Vbus and Vbus-Boost arm64: dts: exynos: Add USB 3.0 controller node for Exynos7 arm64: dts: exynos: Use macros for pinctrl configuration on Exynos7 pinctrl: dt-bindings: samsung: Add Exynos7 specific pinctrl macro definitions arm64: dts: exynos: Add initial configuration for DISP clocks for TM2/TM2e ARM64: dts: meson-gxbb-p200: add ADC laddered keys ARM64: dts: meson: meson-gx: add the SAR ADC ARM64: dts: meson-gxl: add the pwm_ao_b pin ARM64: dts: meson-gx: add the missing pwm_AO_ab node clk: gxbb: fix CLKID_ETH defined twice ARM64: dts: meson-gxl: rename Nexbox A95x for consistency clk: gxbb: add the SAR ADC clocks and expose them dt-bindings: amlogic: Add WeTek boards ARM64: dts: meson-gxbb: Add support for WeTek Hub and Play dt-bindings: vendor-prefix: Add wetek vendor prefix ARM64: dts: meson-gxm: Rename q200 and q201 DT files for consistency ARM64: dts: meson-gx: Add HDMI HPD/DDC pinctrl nodes ...
2017-03-03Documentation/sphinx: fix primary_domain configurationJohn Keeping
With Sphinx 1.5.3 I get the warning: WARNING: primary_domain 'C' not found, ignored. It seems that domain names in Sphinx are case-sensitive and for the C domain the name must be lower case. Signed-off-by: John Keeping <john@metanate.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2017-03-03docs: Fix htmldocs build failureMartyn Welch
Build of HTML docs failing due to conversion of deviceiobook.tmpl in 8a8a602f and regulator.tmpl in 028f2533 to RST without removing from DOCBOOKS in Makefile, resulting (in the case of deviceiobook) the following error: make[1]: *** No rule to make target 'Documentation/DocBook/deviceiobook.xml', needed by 'Documentation/DocBook/deviceiobook.aux.xml'. Stop. Makefile:1452: recipe for target 'htmldocs' failed make: *** [htmldocs] Error 2 Update DOCBOOKS to reflect available books. Signed-off-by: Martyn Welch <martyn.welch@collabora.co.uk> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2017-03-03doc/ko_KR/memory-barriers: Update control-dependencies sectionSeongJae Park
This commit applies upstream change, commit c8241f8553e8 ("doc: Update control-dependencies section of memory-barriers.txt"), to Korean translation. Signed-off-by: SeongJae Park <sj38.park@gmail.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2017-03-03pcieaer doc: update the linkCao jin
The original link is empty, replace it. Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2017-03-03Documentation: Update path to sysrq.txtKrzysztof Kozlowski
Commit 9d85025b0418 ("docs-rst: create an user's manual book") moved the sysrq.txt leaving old paths in the kernel docs. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2017-03-03Merge branch 'rebased-statx' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs 'statx()' update from Al Viro. This adds the new extended stat() interface that internally subsumes our previous stat interfaces, and allows user mode to specify in more detail what kind of information it wants. It also allows for some explicit synchronization information to be passed to the filesystem, which can be relevant for network filesystems: is the cached value ok, or do you need open/close consistency, or what? From David Howells. Andreas Dilger points out that the first version of the extended statx interface was posted June 29, 2010: https://www.spinics.net/lists/linux-fsdevel/msg33831.html * 'rebased-statx' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: statx: Add a system call to make enhanced file info available
2017-03-03ftrace/graph: Add ftrace_graph_max_depth kernel parameterTodd Brandt
Early trace callgraphs can be extremely large on systems with several seconds of boot time. The max_depth parameter limits how deep the graph trace goes and reduces the output size. This parameter is the same as the max_graph_depth file in tracefs. Link: http://lkml.kernel.org/r/1488499935-23216-1-git-send-email-todd.e.brandt@linux.intel.com Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> [ changed comments about debugfs to tracefs ] Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2017-03-02statx: Add a system call to make enhanced file info availableDavid Howells
Add a system call to make extended file information available, including file creation and some attribute flags where available through the underlying filesystem. The getattr inode operation is altered to take two additional arguments: a u32 request_mask and an unsigned int flags that indicate the synchronisation mode. This change is propagated to the vfs_getattr*() function. Functions like vfs_stat() are now inline wrappers around new functions vfs_statx() and vfs_statx_fd() to reduce stack usage. ======== OVERVIEW ======== The idea was initially proposed as a set of xattrs that could be retrieved with getxattr(), but the general preference proved to be for a new syscall with an extended stat structure. A number of requests were gathered for features to be included. The following have been included: (1) Make the fields a consistent size on all arches and make them large. (2) Spare space, request flags and information flags are provided for future expansion. (3) Better support for the y2038 problem [Arnd Bergmann] (tv_sec is an __s64). (4) Creation time: The SMB protocol carries the creation time, which could be exported by Samba, which will in turn help CIFS make use of FS-Cache as that can be used for coherency data (stx_btime). This is also specified in NFSv4 as a recommended attribute and could be exported by NFSD [Steve French]. (5) Lightweight stat: Ask for just those details of interest, and allow a netfs (such as NFS) to approximate anything not of interest, possibly without going to the server [Trond Myklebust, Ulrich Drepper, Andreas Dilger] (AT_STATX_DONT_SYNC). (6) Heavyweight stat: Force a netfs to go to the server, even if it thinks its cached attributes are up to date [Trond Myklebust] (AT_STATX_FORCE_SYNC). And the following have been left out for future extension: (7) Data version number: Could be used by userspace NFS servers [Aneesh Kumar]. Can also be used to modify fill_post_wcc() in NFSD which retrieves i_version directly, but has just called vfs_getattr(). It could get it from the kstat struct if it used vfs_xgetattr() instead. (There's disagreement on the exact semantics of a single field, since not all filesystems do this the same way). (8) BSD stat compatibility: Including more fields from the BSD stat such as creation time (st_btime) and inode generation number (st_gen) [Jeremy Allison, Bernd Schubert]. (9) Inode generation number: Useful for FUSE and userspace NFS servers [Bernd Schubert]. (This was asked for but later deemed unnecessary with the open-by-handle capability available and caused disagreement as to whether it's a security hole or not). (10) Extra coherency data may be useful in making backups [Andreas Dilger]. (No particular data were offered, but things like last backup timestamp, the data version number and the DOS archive bit would come into this category). (11) Allow the filesystem to indicate what it can/cannot provide: A filesystem can now say it doesn't support a standard stat feature if that isn't available, so if, for instance, inode numbers or UIDs don't exist or are fabricated locally... (This requires a separate system call - I have an fsinfo() call idea for this). (12) Store a 16-byte volume ID in the superblock that can be returned in struct xstat [Steve French]. (Deferred to fsinfo). (13) Include granularity fields in the time data to indicate the granularity of each of the times (NFSv4 time_delta) [Steve French]. (Deferred to fsinfo). (14) FS_IOC_GETFLAGS value. These could be translated to BSD's st_flags. Note that the Linux IOC flags are a mess and filesystems such as Ext4 define flags that aren't in linux/fs.h, so translation in the kernel may be a necessity (or, possibly, we provide the filesystem type too). (Some attributes are made available in stx_attributes, but the general feeling was that the IOC flags were to ext[234]-specific and shouldn't be exposed through statx this way). (15) Mask of features available on file (eg: ACLs, seclabel) [Brad Boyer, Michael Kerrisk]. (Deferred, probably to fsinfo. Finding out if there's an ACL or seclabal might require extra filesystem operations). (16) Femtosecond-resolution timestamps [Dave Chinner]. (A __reserved field has been left in the statx_timestamp struct for this - if there proves to be a need). (17) A set multiple attributes syscall to go with this. =============== NEW SYSTEM CALL =============== The new system call is: int ret = statx(int dfd, const char *filename, unsigned int flags, unsigned int mask, struct statx *buffer); The dfd, filename and flags parameters indicate the file to query, in a similar way to fstatat(). There is no equivalent of lstat() as that can be emulated with statx() by passing AT_SYMLINK_NOFOLLOW in flags. There is also no equivalent of fstat() as that can be emulated by passing a NULL filename to statx() with the fd of interest in dfd. Whether or not statx() synchronises the attributes with the backing store can be controlled by OR'ing a value into the flags argument (this typically only affects network filesystems): (1) AT_STATX_SYNC_AS_STAT tells statx() to behave as stat() does in this respect. (2) AT_STATX_FORCE_SYNC will require a network filesystem to synchronise its attributes with the server - which might require data writeback to occur to get the timestamps correct. (3) AT_STATX_DONT_SYNC will suppress synchronisation with the server in a network filesystem. The resulting values should be considered approximate. mask is a bitmask indicating the fields in struct statx that are of interest to the caller. The user should set this to STATX_BASIC_STATS to get the basic set returned by stat(). It should be noted that asking for more information may entail extra I/O operations. buffer points to the destination for the data. This must be 256 bytes in size. ====================== MAIN ATTRIBUTES RECORD ====================== The following structures are defined in which to return the main attribute set: struct statx_timestamp { __s64 tv_sec; __s32 tv_nsec; __s32 __reserved; }; struct statx { __u32 stx_mask; __u32 stx_blksize; __u64 stx_attributes; __u32 stx_nlink; __u32 stx_uid; __u32 stx_gid; __u16 stx_mode; __u16 __spare0[1]; __u64 stx_ino; __u64 stx_size; __u64 stx_blocks; __u64 __spare1[1]; struct statx_timestamp stx_atime; struct statx_timestamp stx_btime; struct statx_timestamp stx_ctime; struct statx_timestamp stx_mtime; __u32 stx_rdev_major; __u32 stx_rdev_minor; __u32 stx_dev_major; __u32 stx_dev_minor; __u64 __spare2[14]; }; The defined bits in request_mask and stx_mask are: STATX_TYPE Want/got stx_mode & S_IFMT STATX_MODE Want/got stx_mode & ~S_IFMT STATX_NLINK Want/got stx_nlink STATX_UID Want/got stx_uid STATX_GID Want/got stx_gid STATX_ATIME Want/got stx_atime{,_ns} STATX_MTIME Want/got stx_mtime{,_ns} STATX_CTIME Want/got stx_ctime{,_ns} STATX_INO Want/got stx_ino STATX_SIZE Want/got stx_size STATX_BLOCKS Want/got stx_blocks STATX_BASIC_STATS [The stuff in the normal stat struct] STATX_BTIME Want/got stx_btime{,_ns} STATX_ALL [All currently available stuff] stx_btime is the file creation time, stx_mask is a bitmask indicating the data provided and __spares*[] are where as-yet undefined fields can be placed. Time fields are structures with separate seconds and nanoseconds fields plus a reserved field in case we want to add even finer resolution. Note that times will be negative if before 1970; in such a case, the nanosecond fields will also be negative if not zero. The bits defined in the stx_attributes field convey information about a file, how it is accessed, where it is and what it does. The following attributes map to FS_*_FL flags and are the same numerical value: STATX_ATTR_COMPRESSED File is compressed by the fs STATX_ATTR_IMMUTABLE File is marked immutable STATX_ATTR_APPEND File is append-only STATX_ATTR_NODUMP File is not to be dumped STATX_ATTR_ENCRYPTED File requires key to decrypt in fs Within the kernel, the supported flags are listed by: KSTAT_ATTR_FS_IOC_FLAGS [Are any other IOC flags of sufficient general interest to be exposed through this interface?] New flags include: STATX_ATTR_AUTOMOUNT Object is an automount trigger These are for the use of GUI tools that might want to mark files specially, depending on what they are. Fields in struct statx come in a number of classes: (0) stx_dev_*, stx_blksize. These are local system information and are always available. (1) stx_mode, stx_nlinks, stx_uid, stx_gid, stx_[amc]time, stx_ino, stx_size, stx_blocks. These will be returned whether the caller asks for them or not. The corresponding bits in stx_mask will be set to indicate whether they actually have valid values. If the caller didn't ask for them, then they may be approximated. For example, NFS won't waste any time updating them from the server, unless as a byproduct of updating something requested. If the values don't actually exist for the underlying object (such as UID or GID on a DOS file), then the bit won't be set in the stx_mask, even if the caller asked for the value. In such a case, the returned value will be a fabrication. Note that there are instances where the type might not be valid, for instance Windows reparse points. (2) stx_rdev_*. This will be set only if stx_mode indicates we're looking at a blockdev or a chardev, otherwise will be 0. (3) stx_btime. Similar to (1), except this will be set to 0 if it doesn't exist. ======= TESTING ======= The following test program can be used to test the statx system call: samples/statx/test-statx.c Just compile and run, passing it paths to the files you want to examine. The file is built automatically if CONFIG_SAMPLES is enabled. Here's some example output. Firstly, an NFS directory that crosses to another FSID. Note that the AUTOMOUNT attribute is set because transiting this directory will cause d_automount to be invoked by the VFS. [root@andromeda ~]# /tmp/test-statx -A /warthog/data statx(/warthog/data) = 0 results=7ff Size: 4096 Blocks: 8 IO Block: 1048576 directory Device: 00:26 Inode: 1703937 Links: 125 Access: (3777/drwxrwxrwx) Uid: 0 Gid: 4041 Access: 2016-11-24 09:02:12.219699527+0000 Modify: 2016-11-17 10:44:36.225653653+0000 Change: 2016-11-17 10:44:36.225653653+0000 Attributes: 0000000000001000 (-------- -------- -------- -------- -------- -------- ---m---- --------) Secondly, the result of automounting on that directory. [root@andromeda ~]# /tmp/test-statx /warthog/data statx(/warthog/data) = 0 results=7ff Size: 4096 Blocks: 8 IO Block: 1048576 directory Device: 00:27 Inode: 2 Links: 125 Access: (3777/drwxrwxrwx) Uid: 0 Gid: 4041 Access: 2016-11-24 09:02:12.219699527+0000 Modify: 2016-11-17 10:44:36.225653653+0000 Change: 2016-11-17 10:44:36.225653653+0000 Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-03-02Merge tag 'pm-extra-4.11-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull more power management updates deom Rafael Wysocki: "These fix two bugs introduced by recent power management updates (in the cpuidle menu governor and intel_pstate) and a few other issues, clean up things and remove unused code. Specifics: - Fix for a cpuidle menu governor problem that started to take an unnecessary spinlock after one of the recent updates and that did not play well with the RT patch (Rafael Wysocki). - Fix for the new intel_pstate operation mode switching feature added recently that did not reinitialize P-state limits properly when switching operation modes (Rafael Wysocki). - Removal of unused global notifiers from the PM QoS framework (Viresh Kumar). - Generic power domains framework update to make it handle asynchronous invocations of PM callbacks in the "noirq" phases of system suspend/hibernation correctly (Ulf Hansson). - Two hibernation core cleanups (Rafael Wysocki). - intel_idle cleanup related to the sysfs interface (Len Brown). - Off-by-one bug fix in the OPP (Operating Performance Points) framework (Andrzej Hajda). - OPP framework's documentation fix (Viresh Kumar). - cpufreq qoriq driver cleanup (Tang Yuantian). - Fixes for typos in comments in the device runtime PM framework (Christophe Jaillet)" * tag 'pm-extra-4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: PM / OPP: Documentation: Fix opp-microvolt in examples intel_idle: stop exposing platform acronyms in sysfs cpufreq: intel_pstate: Fix limits issue with operation mode switching PM / hibernate: Define pr_fmt() and use pr_*() instead of printk() PM / hibernate: Untangle power_down() cpuidle: menu: Avoid taking spinlock for accessing QoS values PM / QoS: Remove global notifiers PM / runtime: Fix some typos cpufreq: qoriq: clean up unused code PM / OPP: fix off-by-one bug in dev_pm_opp_get_max_volt_latency loop PM / Domains: Power off masters immediately in the power off sequence PM / Domains: Rename is_async to one_dev_on for genpd_power_off() PM / Domains: Move genpd_power_off() above genpd_power_on()
2017-03-03Merge branches 'pm-core', 'pm-qos', 'pm-domains' and 'pm-opp'Rafael J. Wysocki
* pm-core: PM / runtime: Fix some typos * pm-qos: PM / QoS: Remove global notifiers * pm-domains: PM / Domains: Power off masters immediately in the power off sequence PM / Domains: Rename is_async to one_dev_on for genpd_power_off() PM / Domains: Move genpd_power_off() above genpd_power_on() * pm-opp: PM / OPP: Documentation: Fix opp-microvolt in examples PM / OPP: fix off-by-one bug in dev_pm_opp_get_max_volt_latency loop
2017-03-02Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security Pull security subsystem fixes from James Morris: "Two fixes for the security subsystem: - keys: split both rcu_dereference_key() and user_key_payload() into versions which can be called with or without holding the key semaphore. - SELinux: fix Android init(8) breakage due to new cgroup security labeling support when using older policy" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: selinux: wrap cgroup seclabel support with its own policy capability KEYS: Differentiate uses of rcu_dereference_key() and user_key_payload()
2017-03-02Merge branch 'next/late' with mainlineArnd Bergmann
* next/late: (25 commits) arm64: dts: exynos: Add regulators for Vbus and Vbus-Boost arm64: dts: exynos: Add USB 3.0 controller node for Exynos7 arm64: dts: exynos: Use macros for pinctrl configuration on Exynos7 pinctrl: dt-bindings: samsung: Add Exynos7 specific pinctrl macro definitions arm64: dts: exynos: Add initial configuration for DISP clocks for TM2/TM2e ARM64: dts: meson-gxbb-p200: add ADC laddered keys ARM64: dts: meson: meson-gx: add the SAR ADC ARM64: dts: meson-gxl: add the pwm_ao_b pin ARM64: dts: meson-gx: add the missing pwm_AO_ab node clk: gxbb: fix CLKID_ETH defined twice clk: samsung: exynos5433: Add data for 250MHz and 278MHz PLL rates clk: samsung: exynos5433: Add IDs for PHYCLK_MIPIDPHY0_* clocks ARM64: dts: meson-gxl: rename Nexbox A95x for consistency clk: gxbb: add the SAR ADC clocks and expose them dt-bindings: amlogic: Add WeTek boards ARM64: dts: meson-gxbb: Add support for WeTek Hub and Play dt-bindings: vendor-prefix: Add wetek vendor prefix ARM64: dts: meson-gxm: Rename q200 and q201 DT files for consistency ARM64: dts: meson-gx: Add HDMI HPD/DDC pinctrl nodes ARM64: dts: meson-gxbb-vega-s95: Add LED ... Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2017-03-02Merge branch 'linus' into perf/urgent, to resolve conflictIngo Molnar
Conflicts: arch/powerpc/configs/85xx/kmp204x_defconfig Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-01Merge tag 'for-f2fs-4.11' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs Pull f2fs updates from Jaegeuk Kim: "This round introduces several interesting features such as on-disk NAT bitmaps, IO alignment, and a discard thread. And it includes a couple of major bug fixes as below. Enhancements: - introduce on-disk bitmaps to avoid scanning NAT blocks when getting free nids - support IO alignment to prepare open-channel SSD integration in future - introduce a discard thread to avoid long latency during checkpoint and fstrim - use SSR for warm node and enable inline_xattr by default - introduce in-memory bitmaps to check FS consistency for debugging - improve write_begin by avoiding needless read IO Bug fixes: - fix broken zone_reset behavior for SMR drive - fix wrong victim selection policy during GC - fix missing behavior when preparing discard commands - fix bugs in atomic write support and fiemap - workaround to handle multiple f2fs_add_link calls having same name ... and it includes a bunch of clean-up patches as well" * tag 'for-f2fs-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (97 commits) f2fs: avoid to flush nat journal entries f2fs: avoid to issue redundant discard commands f2fs: fix a plint compile warning f2fs: add f2fs_drop_inode tracepoint f2fs: Fix zoned block device support f2fs: remove redundant set_page_dirty() f2fs: fix to enlarge size of write_io_dummy mempool f2fs: fix memory leak of write_io_dummy mempool during umount f2fs: fix to update F2FS_{CP_}WB_DATA count correctly f2fs: use MAX_FREE_NIDS for the free nids target f2fs: introduce free nid bitmap f2fs: new helper cur_cp_crc() getting crc in f2fs_checkpoint f2fs: update the comment of default nr_pages to skipping f2fs: drop the duplicate pval in f2fs_getxattr f2fs: Don't update the xattr data that same as the exist f2fs: kill __is_extent_same f2fs: avoid bggc->fggc when enough free segments are avaliable after cp f2fs: select target segment with closer temperature in SSR mode f2fs: show simple call stack in fault injection message f2fs: no need lock_op in f2fs_write_inline_data ...
2017-03-02KEYS: Differentiate uses of rcu_dereference_key() and user_key_payload()David Howells
rcu_dereference_key() and user_key_payload() are currently being used in two different, incompatible ways: (1) As a wrapper to rcu_dereference() - when only the RCU read lock used to protect the key. (2) As a wrapper to rcu_dereference_protected() - when the key semaphor is used to protect the key and the may be being modified. Fix this by splitting both of the key wrappers to produce: (1) RCU accessors for keys when caller has the key semaphore locked: dereference_key_locked() user_key_payload_locked() (2) RCU accessors for keys when caller holds the RCU read lock: dereference_key_rcu() user_key_payload_rcu() This should fix following warning in the NFS idmapper =============================== [ INFO: suspicious RCU usage. ] 4.10.0 #1 Tainted: G W ------------------------------- ./include/keys/user-type.h:53 suspicious rcu_dereference_protected() usage! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 0 1 lock held by mount.nfs/5987: #0: (rcu_read_lock){......}, at: [<d000000002527abc>] nfs_idmap_get_key+0x15c/0x420 [nfsv4] stack backtrace: CPU: 1 PID: 5987 Comm: mount.nfs Tainted: G W 4.10.0 #1 Call Trace: dump_stack+0xe8/0x154 (unreliable) lockdep_rcu_suspicious+0x140/0x190 nfs_idmap_get_key+0x380/0x420 [nfsv4] nfs_map_name_to_uid+0x2a0/0x3b0 [nfsv4] decode_getfattr_attrs+0xfac/0x16b0 [nfsv4] decode_getfattr_generic.constprop.106+0xbc/0x150 [nfsv4] nfs4_xdr_dec_lookup_root+0xac/0xb0 [nfsv4] rpcauth_unwrap_resp+0xe8/0x140 [sunrpc] call_decode+0x29c/0x910 [sunrpc] __rpc_execute+0x140/0x8f0 [sunrpc] rpc_run_task+0x170/0x200 [sunrpc] nfs4_call_sync_sequence+0x68/0xa0 [nfsv4] _nfs4_lookup_root.isra.44+0xd0/0xf0 [nfsv4] nfs4_lookup_root+0xe0/0x350 [nfsv4] nfs4_lookup_root_sec+0x70/0xa0 [nfsv4] nfs4_find_root_sec+0xc4/0x100 [nfsv4] nfs4_proc_get_rootfh+0x5c/0xf0 [nfsv4] nfs4_get_rootfh+0x6c/0x190 [nfsv4] nfs4_server_common_setup+0xc4/0x260 [nfsv4] nfs4_create_server+0x278/0x3c0 [nfsv4] nfs4_remote_mount+0x50/0xb0 [nfsv4] mount_fs+0x74/0x210 vfs_kern_mount+0x78/0x220 nfs_do_root_mount+0xb0/0x140 [nfsv4] nfs4_try_mount+0x60/0x100 [nfsv4] nfs_fs_mount+0x5ec/0xda0 [nfs] mount_fs+0x74/0x210 vfs_kern_mount+0x78/0x220 do_mount+0x254/0xf70 SyS_mount+0x94/0x100 system_call+0x38/0xe0 Reported-by: Jan Stancek <jstancek@redhat.com> Signed-off-by: David Howells <dhowells@redhat.com> Tested-by: Jan Stancek <jstancek@redhat.com> Signed-off-by: James Morris <james.l.morris@oracle.com>
2017-03-01PM / OPP: Documentation: Fix opp-microvolt in examplesViresh Kumar
The triplet present in "opp-microvolt" property should be in the order <target min max>, while all the examples have it in the order <min target max>. Fix it. Luckily all of the users of "opp-microvolt" property have applied brain instead of copying the examples from documentation and none of the actual dts files have it wrong. Reported-by: Rob Herring <robh@kernel.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-03-01Merge branch 'next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux Pull thermal management updates from Zhang Rui: - add thermal driver for R-Car Gen3 thermal sensors. - add thermal driver for ZTE' zx2967 family thermal sensors. - convert thermal ID allocation from IDR to IDA. - fix a possible NULL dereference in imx thermal driver. - fix a ti-soc-thermal driver dependency issue so that critical thermal control is still available when CPU_THERMAL is not defined. - update binding information for QorIQ thermal driver. - a couple of cleanups in thermal core, intel_powerclamp, exynos, dra752-thermal, mtk-thermal driver. * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: powerpc/mpc85xx: Update TMU device tree node for T1023/T1024 powerpc/mpc85xx: Update TMU device tree node for T1040/T1042 dt-bindings: Update QorIQ TMU thermal bindings thermal: mtk_thermal: Staticise a number of data variables thermal: arm: dra752: Remove all TSHUT related definitions thermal: arm: dra752: Remove TSHUT configuration thermal: ti-soc-thermal: Remove CPU_THERMAL Dependency from TI_THERMAL thermal: imx: Fix possible NULL dereference. thermal: exynos: Remove parsing unused samsung,tmu_cal_mode property thermal: zx2967: add thermal driver for ZTE's zx2967 family thermal: use cpumask_var_t for on-stack cpu masks dt: bindings: add documentation for zx2967 family thermal sensor thermal/intel_powerclamp: Remove set-but-not-used variables thermal: rcar_gen3_thermal: Add R-Car Gen3 thermal driver thermal: rcar_gen3_thermal: Document the R-Car Gen3 thermal: convert devfreq_cooling to use an IDA thermal: convert cpu_cooling to use an IDA thermal: convert clock cooling to use an IDA thermal core: convert ID allocation to IDA
2017-03-01Merge tag 'pwm/for-4.11-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm Pull pwm updates from Thierry Reding: "This set contains mostly fixes to existing drivers as well as cleanup of code that's not been in active use for a while" * tag 'pwm/for-4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (27 commits) acpi: lpss: call pwm_add_table() for BSW PWM device pwm: Try to load modules during pwm_get() pwm: Don't hold pwm_lookup_lock longer than necessary pwm: Make the PWM_POLARITY flag in DTB optional pwm: Print error messages with pr_err() instead of pr_debug() pwm: imx: Add polarity inversion support to i.MX's PWMv2 pwm: imx: doc: Update imx-pwm.txt documentation entry pwm: imx: Remove redundant i.MX PWMv2 code pwm: imx: Provide atomic PWM support for i.MX PWMv2 pwm: imx: Move PWMv2 wait for fifo slot code to a separate function pwm: imx: Move PWMv2 software reset code to a separate function pwm: imx: Rewrite v1 code to facilitate switch to atomic PWM pwm: imx: Add separate set of PWM ops for v1 and v2 pwm: imx: Remove ipg clock and enable per clock when required pwm: lpss: Add Intel Gemini Lake PCI ID pwm: lpss: Do not export board infos for different PWM types pwm: lpss: Avoid reconfiguring while UPDATE bit is still enabled pwm: lpss: Switch to new atomic API pwm: lpss: Allow duty cycle to be 0 pwm: lpss: Avoid potential overflow of base_unit ...
2017-03-01perf/core: Rename CONFIG_[UK]PROBE_EVENT to CONFIG_[UK]PROBE_EVENTSAnton Blanchard
We have uses of CONFIG_UPROBE_EVENT and CONFIG_KPROBE_EVENT as well as CONFIG_UPROBE_EVENTS and CONFIG_KPROBE_EVENTS. Consistently use the plurals. Signed-off-by: Anton Blanchard <anton@samba.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: acme@kernel.org Cc: alexander.shishkin@linux.intel.com Cc: davem@davemloft.net Cc: sparclinux@vger.kernel.org Link: http://lkml.kernel.org/r/20170216060050.20866-1-anton@ozlabs.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-02-28Merge tag 'for-linus-4.11' of git://git.code.sf.net/p/openipmi/linux-ipmiLinus Torvalds
Pull IPMI updates from Corey Minyard: "This is a few small fixes to the main IPMI driver, make some things const, fix typos, etc. The last patch came in about a week ago, but IMHO it's best to go in now. It is not for the main driver, it's for the bt-bmc driver, which runs on the managment controller side, not on the host side, so the scope is limited and the change is necessary" * tag 'for-linus-4.11' of git://git.code.sf.net/p/openipmi/linux-ipmi: ipmi: bt-bmc: Use a regmap for register access char: ipmi: constify ipmi_smi_handlers structures acpi:ipmi: Make IPMI user handler const ipmi: make ipmi_usr_hndl const Documentation: Fix a typo in IPMI.txt.
2017-02-28Merge tag 'ceph-for-4.11-rc1' of git://github.com/ceph/ceph-clientLinus Torvalds
Pull ceph updates from Ilya Dryomov: "This time around we have: - support for rbd data-pool feature, which enables rbd images on erasure-coded pools (myself). CEPH_PG_MAX_SIZE has been bumped to allow erasure-coded profiles with k+m up to 32. - a patch for ceph_d_revalidate() performance regression introduced in 4.9, along with some cleanups in the area (Jeff Layton) - a set of fixes for unsafe ->d_parent accesses in CephFS (Jeff Layton) - buffered reads are now processed in rsize windows instead of rasize windows (Andreas Gerstmayr). The new default for rsize mount option is 64M. - ack vs commit distinction is gone, greatly simplifying ->fsync() and MOSDOpReply handling code (myself) ... also a few filesystem bug fixes from Zheng, a CRUSH sync up (CRUSH computations are still serialized though) and several minor fixes and cleanups all over" * tag 'ceph-for-4.11-rc1' of git://github.com/ceph/ceph-client: (52 commits) libceph, rbd, ceph: WRITE | ONDISK -> WRITE libceph: get rid of ack vs commit ceph: remove special ack vs commit behavior ceph: tidy some white space in get_nonsnap_parent() crush: fix dprintk compilation crush: do is_out test only if we do not collide ceph: remove req from unsafe list when unregistering it rbd: constify device_type structure rbd: kill obj_request->object_name and rbd_segment_name_cache rbd: store and use obj_request->object_no rbd: RBD_V{1,2}_DATA_FORMAT macros rbd: factor out __rbd_osd_req_create() rbd: set offset and length outside of rbd_obj_request_create() rbd: support for data-pool feature rbd: introduce rbd_init_layout() rbd: use rbd_obj_bytes() more rbd: remove now unused rbd_obj_request_wait() and helpers rbd: switch rbd_obj_method_sync() to ceph_osdc_call() libceph: pass reply buffer length through ceph_osdc_call() rbd: do away with obj_request in rbd_obj_read_sync() ...
2017-02-28Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Ingo Molnar: "Two documentation updates, plus a debugging annotation fix" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/crash: Update the stale comment in reserve_crashkernel() x86/irq, trace: Add __irq_entry annotation to x86's platform IRQ handlers Documentation, x86, resctrl: Recommend locking for resctrlfs
2017-02-27Merge branch 'akpm' (patches from Andrew)Linus Torvalds
Merge yet more updates from Andrew Morton: - a few MM remainders - misc things - autofs updates - signals - affs updates - ipc - nilfs2 - spelling.txt updates * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (78 commits) mm, x86: fix HIGHMEM64 && PARAVIRT build config for native_pud_clear() mm: add arch-independent testcases for RODATA hfs: atomically read inode size mm: clarify mm_struct.mm_{users,count} documentation mm: use mmget_not_zero() helper mm: add new mmget() helper mm: add new mmgrab() helper checkpatch: warn when formats use %Z and suggest %z lib/vsprintf.c: remove %Z support scripts/spelling.txt: add some typo-words scripts/spelling.txt: add "followings" pattern and fix typo instances scripts/spelling.txt: add "therfore" pattern and fix typo instances scripts/spelling.txt: add "overwriten" pattern and fix typo instances scripts/spelling.txt: add "overwritting" pattern and fix typo instances scripts/spelling.txt: add "deintialize(d)" pattern and fix typo instances scripts/spelling.txt: add "disassocation" pattern and fix typo instances scripts/spelling.txt: add "omited" pattern and fix typo instances scripts/spelling.txt: add "explictely" pattern and fix typo instances scripts/spelling.txt: add "applys" pattern and fix typo instances scripts/spelling.txt: add "configuartion" pattern and fix typo instances ...
2017-02-27Merge branch 'for-4.11' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup Pull cgroup updates from Tejun Heo: "Several noteworthy changes. - Parav's rdma controller is finally merged. It is very straight forward and can limit the abosolute numbers of common rdma constructs used by different cgroups. - kernel/cgroup.c got too chubby and disorganized. Created kernel/cgroup/ subdirectory and moved all cgroup related files under kernel/ there and reorganized the core code. This hurts for backporting patches but was long overdue. - cgroup v2 process listing reimplemented so that it no longer depends on allocating a buffer large enough to cache the entire result to sort and uniq the output. v2 has always mangled the sort order to ensure that users don't depend on the sorted output, so this shouldn't surprise anybody. This makes the pid listing functions use the same iterators that are used internally, which have to have the same iterating capabilities anyway. - perf cgroup filtering now works automatically on cgroup v2. This patch was posted a long time ago but somehow fell through the cracks. - misc fixes asnd documentation updates" * 'for-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: (27 commits) kernfs: fix locking around kernfs_ops->release() callback cgroup: drop the matching uid requirement on migration for cgroup v2 cgroup, perf_event: make perf_event controller work on cgroup2 hierarchy cgroup: misc cleanups cgroup: call subsys->*attach() only for subsystems which are actually affected by migration cgroup: track migration context in cgroup_mgctx cgroup: cosmetic update to cgroup_taskset_add() rdmacg: Fixed uninitialized current resource usage cgroup: Add missing cgroup-v2 PID controller documentation. rdmacg: Added documentation for rdmacg IB/core: added support to use rdma cgroup controller rdmacg: Added rdma cgroup controller cgroup: fix a comment typo cgroup: fix RCU related sparse warnings cgroup: move namespace code to kernel/cgroup/namespace.c cgroup: rename functions for consistency cgroup: move v1 mount functions to kernel/cgroup/cgroup-v1.c cgroup: separate out cgroup1_kf_syscall_ops cgroup: refactor mount path and clearly distinguish v1 and v2 paths cgroup: move cgroup v1 specific code to kernel/cgroup/cgroup-v1.c ...
2017-02-27Merge tag 'rtc-4.11' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux Pull RTC updates from Alexandre Belloni: "Subsystem: - constify rtc_class_ops structures New driver: - STM32 Drivers: - armada38x: fix errata, Armada 7K/8K support - ds3232: fix wakeup support - gemini: DT support - m48t86: huge cleanup and platform_data removal - mcp795: alarm support - sun6i: proper oscillator handling - tegra: proper clock handling - tps65910: calibration support" * tag 'rtc-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (44 commits) rtc: ds3232: Call device_init_wakeup before device_register rtc: pcf2127: bulk read only date and time registers. rtc: armada38x: Add support for Armada 7K/8K rtc: armada38x: Prepare driver to manage different versions rtc: ds3232: Add regmap max_register definition. rtc: ds3232: Cleanup whitespace around register and bit definitions. rtc: m48t86: remove unused platform_data ARM: Orion5x: ts78xx: allow rtc-m48t86 to manage it's own resources ARM: Orion5x: ts78xx: remove RTC detection ARM: ep93xx: ts72xx: allow rtc-m48t86 to manage its own resources rtc: m48t86: verify that the RTC is actually present rtc: m48t86: add NVRAM support rtc: m48t86: allow driver to manage its resources rtc: m48t86: shorten register name defines bindings: rtc: correct wrong reference in required properties rtc: sun6i: Fix return value check in sun6i_rtc_clk_init() rtc: sun6i: extend test coverage rtc: sun6i: Fix compatibility with old DT binding rtc: snvs: add a missing write sync rtc: bq32000: add support to enable disable the trickle charge FET bypass ...
2017-02-27scripts/spelling.txt: add "followings" pattern and fix typo instancesMasahiro Yamada
Fix typos and add the following to the scripts/spelling.txt: followings||following While we are here, add a missing colon in the boilerplate in DT binding documents. The "you SoC" in allwinner,sunxi-pinctrl.txt was fixed as well. I reworded "as the followings:" to "as follows:" for drivers/usb/gadget/udc/renesas_usb3.c. Link: http://lkml.kernel.org/r/1481573103-11329-32-git-send-email-yamada.masahiro@socionext.com Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>