| Age | Commit message (Collapse) | Author |
|---|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-linus
Jonathan writes:
IIO: 1st set of fixes for 6.13 cycle.
The usual mixed back of fixes for ancient and recent bugs
A number of these were from an audit by Javier Carrasco of places
we may leak stack data via holes in structures passed to userspace that
were not explicitly zeroed. Very helpful effort after we found a similar
bug in review of new code.
This affected:
- dummy driver
- kionix,kmx61
- murrata,zpa2326
- rockchip,saradc
- rohm,bh1745
- veml,vcnl4035
- ti,ads1119
- ti,ads8688
- ti,tmp0006
Other fixes:
core,inkern
- Underflow fo reference count issue in error path of iio_channel_get_all()
for devices we haven't yet gotten.
tests
- Kconfig typo fix so it's possible to tell what test is being enabled.
- Check for allocation failures.
adi,ad4695
- Ensure timing requirement wrt to final clock edge vs next conversion
signal are met by adding an additional SPI transfer.
adi,ad7124
- Ensure channels are disabled at probe to avoid wrong data if channel 0
is not the first one read.
adi,ad7173
- Fix handing of multiple devices by not editing a single static
structure and instead making a per instance copy.
adi,ad9467
- Fix handing of multiple devices by not editing a single static
structure and instead making a per instance copy.
adi,ad9832
- Off by one error on input verification for phase control
adi,ad9834
- Off by one error on input verification for phase control.
atmel,at91
- In an error path don't use a variable that hasn't been initialized yet.
invensense,icm42600
- SPI burst write does not work for some icm426000 chips, disable it.
- Ensure correct handling of timestamps after resume.
st,sensors
- Add back accidentally dropped IIS2MDC compatible in binding doc.
st,stm32-dfsdm:
- label property was accidentally made a required property. Make it optional
again to fix use of older DT.
ti,ads1119
- Use a fixed size for the channel data rather than an integer, bringing
the code inline with the advertised 16 bit channel size and avoiding
userspace misinterpreting the data.
ti,ads124s08
- Use _cansleep gpio calls as no reason to prevent sleeping and it
was stopping a new board design working (trivial fix).
ti,ads1298
- Add a check on failure of devm_kasprintf()
* tag 'iio-fixes-for-6.13a' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (27 commits)
iio: adc: ti-ads1119: fix sample size in scan struct for triggered buffer
iio: temperature: tmp006: fix information leak in triggered buffer
iio: inkern: call iio_device_put() only on mapped devices
iio: adc: ad9467: Fix the "don't allow reading vref if not available" case
iio: adc: at91: call input_free_device() on allocated iio_dev
iio: adc: ad7173: fix using shared static info struct
iio: adc: ti-ads124s08: Use gpiod_set_value_cansleep()
iio: adc: ti-ads1119: fix information leak in triggered buffer
iio: pressure: zpa2326: fix information leak in triggered buffer
iio: adc: rockchip_saradc: fix information leak in triggered buffer
iio: imu: kmx61: fix information leak in triggered buffer
iio: light: vcnl4035: fix information leak in triggered buffer
iio: light: bh1745: fix information leak in triggered buffer
iio: adc: ti-ads8688: fix information leak in triggered buffer
iio: dummy: iio_simply_dummy_buffer: fix information leak in triggered buffer
iio: test: Fix GTS test config
dt-bindings: iio: st-sensors: Re-add IIS2MDC magnetometer
iio: adc: ti-ads1298: Add NULL check in ads1298_init
iio: adc: stm32-dfsdm: handle label as an optional property
iio: adc: ad4695: fix buffered read, single sample timings
...
|
|
We need the USB fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We need the serial fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
drivers
32 IDs should be plenty (at yet, not too greedy) since a lot of sample
drivers will use their own subsystem allocations.
Sample drivers predominately reside in <KERNEL_ROOT>/samples, but there
should be no issue with in-place example drivers using them.
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20241213134715.601415-2-lee@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Both the ALC5645 and ALC5650 datasheets specify a recommended voltage of
1.8V for CPVDD, not 3.5V.
Fix the comment.
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Fixes: 26aa19174f0d ("ASoC: dt-bindings: rt5645: add suppliers")
Fixes: 83d43ab0a1cb ("ASoC: dt-bindings: realtek,rt5645: Convert to dtschema")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20241211035403.4157760-1-wenst@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add device tree bindings documentation for Qualcomm MSM8917
pinctrl driver.
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Barnabás Czémán <barnabas.czeman@mainlining.org>
Link: https://lore.kernel.org/20241215-msm8917-v9-2-bacaa26f3eef@mainlining.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Introduce support for ETHTOOL_MSG_TSCONFIG_GET/SET ethtool netlink socket
to read and configure hwtstamp configuration of a PHC provider. Note that
simultaneous hwtstamp isn't supported; configuring a new one disables the
previous setting.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Either the MAC or the PHY can provide hwtstamp, so we should be able to
read the tsinfo for any hwtstamp provider.
Enhance 'get' command to retrieve tsinfo of hwtstamp providers within a
network topology.
Add support for a specific dump command to retrieve all hwtstamp
providers within the network topology, with added functionality for
filtered dump to target a single interface.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Document the kernel's behavior and userspace expectations.
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
gpio-line-names is a generic property that can be supported by any
GPIO controller, so permit it through the binding.
It is permitted to have a variable number of GPIOs per node based
on brcm,gpio-bank-widths, so define an arbitrary maximum number of
items based on current users.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Acked-by: Florian Fainelli <florian.fainelli@broadcom.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20241212-dt-bcm2712-fixes-v3-3-44a7f3390331@raspberrypi.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
This value was found on an ASRock B650 Steel Legend WiFi with an
NCT6686D chip.
Signed-off-by: Max Ammann <max@maxammann.org>
Link: https://lore.kernel.org/r/20241214102201.122851-1-max@maxammann.org
[groeck: htmldocs fix]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Add uint, sint to the list of attr types in the netlink-raw schema. This
fixes the rt_link spec which had a uint attr added in commit
f858cc9eed5b ("net: add IFLA_MAX_PACING_OFFLOAD_HORIZON device attribute")
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20241213110827.32250-1-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The GPIO2 pin on the DP83822 can be configured as clock output. Add
binding to support this feature.
Signed-off-by: Dimitri Fedrau <dimitri.fedrau@liebherr.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Document the MDSS and DPU hardware found on the Qualcomm SM6150 platform.
Signed-off-by: Li Liu <quic_lliu6@quicinc.com>
Signed-off-by: Fange Zhang <quic_fangez@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/628003/
Link: https://lore.kernel.org/r/20241210-add-display-support-for-qcs615-platform-v4-3-2d875a67602d@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Document general compatibility of the DSI controller on SM6150.
Signed-off-by: Li Liu <quic_lliu6@quicinc.com>
Signed-off-by: Fange Zhang <quic_fangez@quicinc.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/628002/
Link: https://lore.kernel.org/r/20241210-add-display-support-for-qcs615-platform-v4-2-2d875a67602d@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Add new compatible for SM6150 with dsi_phy_14nm_36mA_regulators
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Li Liu <quic_lliu6@quicinc.com>
Signed-off-by: Fange Zhang <quic_fangez@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/627999/
Link: https://lore.kernel.org/r/20241210-add-display-support-for-qcs615-platform-v4-1-2d875a67602d@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Userspace wants to now about the used power supply extensions,
for example to handle a device extended by a certain extension
differently or to discover information about the extending device.
Add a sysfs directory to the power supply device.
This directory contains links which are named after the used extension
and point to the device implementing that extension.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20241211-power-supply-extensions-v6-4-9d9dc3f3d387@weissschuh.net
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB driver fixes from Greg KH:
"Here are some small USB driver fixes for some reported issues.
Included in here are:
- typec driver bugfixes
- u_serial gadget driver bugfix for much reported and discussed issue
- dwc2 bugfixes
- midi gadget driver bugfix
- ehci-hcd driver bugfix
- other small bugfixes
All of these have been in linux-next for over a week with no reported
issues"
* tag 'usb-6.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: typec: ucsi: Fix connector status writing past buffer size
usb: typec: ucsi: Fix completion notifications
usb: dwc2: Fix HCD port connection race
usb: dwc2: hcd: Fix GetPortStatus & SetPortFeature
usb: dwc2: Fix HCD resume
usb: gadget: u_serial: Fix the issue that gs_start_io crashed due to accessing null pointer
usb: misc: onboard_usb_dev: skip suspend/resume sequence for USB5744 SMBus support
usb: dwc3: xilinx: make sure pipe clock is deselected in usb2 only mode
usb: core: hcd: only check primary hcd skip_phy_initialization
usb: gadget: midi2: Fix interpretation of is_midi1 bits
usb: dwc3: imx8mp: fix software node kernel dump
usb: typec: anx7411: fix OF node reference leaks in anx7411_typec_switch_probe()
usb: typec: anx7411: fix fwnode_handle reference leak
usb: host: max3421-hcd: Correctly abort a USB request.
dt-bindings: phy: imx8mq-usb: correct reference to usb-switch.yaml
usb: ehci-hcd: fix call balance of clocks handling routines
|
|
This commit adds rcutorture module parameters gp_cond_wi, gp_cond_wi_exp,
gp_poll_wi, and gp_poll_wi_exp to control the wait interval for
conditional, conditional expedited, polled, and polled expedited grace
periods, respectively. When rcu_torture_writer() is testing these types
of grace periods, hrtimers are used to randomly wait up to the specified
number of microseconds, but with nanosecond granularity.
In the case of conditional grace periods (get_state_synchronize_rcu()
and cond_synchronize_rcu(), for example) there is just one
wait. For polled grace periods (start_poll_synchronize_rcu() and
poll_state_synchronize_rcu(), for example), there is a repeated series
of waits until the grace period ends.
For normal grace periods, the default is 16 jiffies (for example, 16,000
microseconds on a HZ=1000 system) and for expedited grace periods the
default is 128 microseconds.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
|
|
This commit adds kernel-parameters.txt documentation for rcutorture's
(relatively) new gp_cond_exp, gp_cond_full, gp_cond_exp, gp_poll,
gp_poll_exp, gp_poll_full, and gp_poll_exp module parameters.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
|
|
This commit adds the rcutorture.preempt_duration kernel module parameter,
which gives the real-time preemption duration in milliseconds (zero to
disable, which is the default) and also the rcutorture.preempt_interval
module parameter, which gives the interval between successive preemptions,
also in milliseconds, defaulting to one second. The CPU to preempt is
chosen at random from those online at that time. Races between preempting
a given CPU and that CPU going offline are ignored, and preemption is
forgone when this occurs.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
|
|
Add support for TUF GAMING X670E PLUS.
Signed-off-by: Li XingYang <yanhuoguifan@gmail.com>
[groeck: Massaged description]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Add initial support for the Texas Instruments TPS25990 eFuse.
This adds the basic PMBUS telemetry support for the device.
From Karol Przybylski:
The tps25990_read_word_data function contains a block of unreachable code
caused by the syntactic structure in the PMBUS_VIRT_READ_IIN_MAX case.
Specifically, the return TPS25990_READ_IIN_PEAK; statement immediately
exits the function, making the next lines unreachable.
This patch removes the return statement, leaving the expected handling.
Discovered in coverity: CID 1602227
Tested-by: Vaishnav Achath <vaishnav.a@ti.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
[groeck: Adjust to MODULE_IMPORT_NS API change]
[karprzy7@gmail.com: Fix unreachable code in tps25990_read_word_data]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Add a module parameter to force the write protection mode of pmbus chips.
4 protections modes are provided to start with:
* 0: Remove the write protection
* 1: Disable all writes except to the WRITE_PROTECT, OPERATION,
PAGE, ON_OFF_CONFIG and VOUT_COMMAND commands
* 2: Disable all writes except to the WRITE_PROTECT, OPERATION and
PAGE commands
* 3: Disable all writes except to the WRITE_PROTECT command
Of course, if the parameter is not provided, the default write protection
status of the pmbus chips is left untouched.
Suggested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Writing PMBus protected registers does succeed from the smbus perspective,
even if the write is ignored by the device and a communication fault is
raised. This fault will silently be caught and cleared by pmbus irq if one
has been registered.
This means that the regulator call may return succeed although the
operation was ignored.
With this change, the operation which are not supported will be properly
flagged as such and the regulator framework won't even try to execute them.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
[groeck: Adjust to EXPORT_SYMBOL_NS_GPL API change]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
During the upstreaming process, the driver has been extended to report
the shunt voltage as well. Document that.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Vendor is "Renesas" not "ISL".
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Update the AMD memory encryption documentation to include information on
the Reverse Map Table (RMP) and the two table formats.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Nikunj A Dadhania <nikunj@amd.com>
Reviewed-by: Neeraj Upadhyay <Neeraj.Upadhyay@amd.com>
Link: https://lore.kernel.org/r/d3feea54912ad9ff2fc261223db691ca11fc547f.1733172653.git.thomas.lendacky@amd.com
|
|
Add dt-schema documentation for the Exynos990 SoC CMU.
This clock management unit has a topmost block (CMU_TOP)
that generates top clocks for other blocks. Currently the
only other block implemented is CMU_HSI0, which provides
clocks for the USB part of the SoC.
Also, device-tree binding definitions added for these blocks:
- CMU_TOP
- CMU_HSI0
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Igor Belwon <igor.belwon@mentallysanemainliners.org>
Link: https://lore.kernel.org/r/20241209-exynos990-cmu-v4-1-57f07080f9e4@mentallysanemainliners.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fixes from Mark Brown:
"A couple of additional changes, one ensuring we give AXP717 enough
time to stabilise after changing voltages which fixes serious
stability issues on some platforms and another documenting the DT
support required for the Qualcomm WCN6750"
* tag 'regulator-fix-v6.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: axp20x: AXP717: set ramp_delay
regulator: dt-bindings: qcom,qca6390-pmu: document wcn6750-pmu
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management documentation fix from Rafael Wysocki:
"Fix a runtime PM documentation mistake that may mislead someone into
making a coding mistake (Paul Barker)"
* tag 'pm-6.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
Documentation: PM: Clarify pm_runtime_resume_and_get() return value
|
|
Add LTC4162-F/S and LTC4015 to the supported devices of LTC4162-L.
They share a common set of registers. The only differences lie in the
resolution value of the scaling factor for battery voltage and battery
current measurement, input voltage, and input current for different
battery chemistries. The differences also include the calculation of
setting and getting the actual voltage applied to the charge voltage,
as well as getting the die temperature.
This add compatible entries for ltc4162-f/s and ltc4015 and include
datasheets for new devices.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Kim Seer Paller <kimseer.paller@analog.com>
Link: https://lore.kernel.org/r/20241213023746.34168-2-kimseer.paller@analog.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
Add device tree bindings for the Blaize BLZP1600 CB2 development
board (carrier board). This board integrates a Blaize BLZP1600
SoM (System on Module) which is based on the Blaize BLZP1600 SoC.
The Blaize BLZP1600 SoC integrates a dual core ARM Cortex A53
cluster and a Blaize Graph Streaming Processor for AI and ML
workloads, plus a suite of connectivity and other peripherals.
Signed-off-by: Nikolaos Pasaloukos <nikolaos.pasaloukos@blaize.com>
Reviewed-by: Matt Redfearn <matt.redfearn@blaize.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Blaize, Inc. (www.blaize.com) is a SoC manufacturer with integrated
programmable Graph-Streaming-Processors for AI and ML.
Signed-off-by: Nikolaos Pasaloukos <nikolaos.pasaloukos@blaize.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Fixes a typo in the ZRAM documentation where 'dictioary' was
misspelled. Corrected it to 'dictionary' in the example usage
of 'algorithm_params'.
Signed-off-by: Sarveshwaar SS <sarvesh20123@gmail.com>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20241125165122.17521-1-sarvesh20123@gmail.com
|
|
There is already kernel-doc written for many of the functions in kref.h
but it's not linked into the html docs anywhere. Add it to kref.rst.
Improve the kref documentation by using the standard Return: section,
rewording some unclear verbiage and adding docs for some undocumented
functions.
Update Thomas' email address to his current one.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20241209160953.757673-1-willy@infradead.org
|
|
This fixes two small misspells in the filesystems documentation.
Signed-off-by: Bingwu Zhang <xtex@aosc.io>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20241208035447.162465-2-xtex@envs.net
|
|
Corrected a typo in the 'taskstats-struct.rst' documentation. The macro
name 'TAKSTATS_VERSION' was mistakenly mentioned instead of the correct
'TASKSTATS_VERSION'. The corrected line now references the proper macro
'TASKSTATS_VERSION', defined in '<linux/taskstats.h>'.
Signed-off-by: Sarveshwaar SS <sarvesh20123@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20241208083320.16190-1-sarvesh20123@gmail.com
|
|
There are some typos in the documentation: 'a' -> 'at', missing 'to'.
Fix them.
Signed-off-by: Andrew Kreimer <algonell@gmail.com>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20241209130640.10954-1-algonell@gmail.com
|
|
This has slightly changed with the introduction of fair_server.
Update the most relevant parts.
Link: https://lore.kernel.org/r/Z0c8S8i3qt7SEU14@jlelli-thinkpadt14gen4.remote.csb/
Signed-off-by: Michal Koutný <mkoutny@suse.com>
Reviewed-by: Juri Lelli <juri.lelli@redhat.com>
Acked-by: Juri Lelli <juri.lelli@redhat.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20241211170052.2449581-1-mkoutny@suse.com
|
|
This adds a document about nvme-multipath and policies supported
by the Linux NVMe host driver, and also each policy's best scenario.
Signed-off-by: Guixin Liu <kanie@linux.alibaba.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20241209071127.22922-1-kanie@linux.alibaba.com
|
|
Just spotted this while reading the doc.
Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20241213151743.23435-1-cem@kernel.org
|
|
filtering
The is some "magic" hard coded filtering in the replicators,
which only passes through trace from a particular "source". Add
a new property "filter-source" to label a phandle to the coresight
trace source device matching the hard coded filtering for the port.
Signed-off-by: Tao Zhang <quic_taozha@quicinc.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20241213100731.25914-2-quic_taozha@quicinc.com
|
|
Renesas RZ/G3E DT Binding Definitions
DT bindings and binding definitions for the Renesas RZ/G3E (R9A09G047)
SoC, shared by driver and DT source files.
|
|
Document the device tree bindings for the Renesas RZ/G3E SoC
Clock Pulse Generator (CPG).
Also define constants for the core clocks of the RZ/G3E SoC.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20241203105005.103927-5-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Document the Renesas RZ/G3E SMARC Carrier-II EVK board which is based
on the Renesas RZ/G3E SMARC SoM. The RZ/G3E SMARC Carrier-II EVK
consists of an RZ/G3E SoM module and a SMARC Carrier-II carrier board.
The SoM module sits on top of the carrier board.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20241203105005.103927-4-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Document Renesas RZ/G3E (R9A09G047) SoC variants.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20241203105005.103927-3-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Add Multi-Inno Technology MI0700A2T-30 7" 800x480 LVDS panel
compatible string.
Signed-off-by: Marek Vasut <marex@denx.de>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20241125013413.160725-1-marex@denx.de
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241125013413.160725-1-marex@denx.de
|
|
The AUO G084SN05 V9 is an 8.4" 800x600 LVDS display.
Add a compatible entry for this LVDS display model.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20241210105705.116116-1-festevam@gmail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241210105705.116116-1-festevam@gmail.com
|
|
Document the new compatibles used on IBM SBP1.
Signed-off-by: Naresh Solanki <naresh.solanki@9elements.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20241104092220.2268805-1-naresh.solanki@9elements.com
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
|
