summaryrefslogtreecommitdiff
path: root/Documentation
AgeCommit message (Collapse)Author
2019-09-27Documentation: Clarify trap's descriptionIdo Schimmel
Alex noted that the below description might not be obvious to all users. Clarify it by adding an example. Fixes: f3047ca01f12 ("Documentation: Add devlink-trap documentation") Reported-by: Alex Kushnarov <alexanderk@mellanox.com> Reviewed-by: Alex Kushnarov <alexanderk@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-26dt-bindings: net: ravb: Add support for r8a774b1 SoCBiju Das
Document RZ/G2N (R8A774B1) SoC bindings. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-20dt-bindings: net: remove un-implemented propertyAlexandru Ardelean
The `adi,disable-energy-detect` property was implemented in an initial version of the `adin` driver series, but after a review it was discarded in favor of implementing the ETHTOOL_PHY_EDPD phy-tunable option. With the ETHTOOL_PHY_EDPD control, it's possible to disable/enable Energy-Detect-Power-Down for the `adin` PHY, so this device-tree is not needed. Fixes: 767078132ff9 ("dt-bindings: net: add bindings for ADIN PHY driver") Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-09-20dt-bindings: net: dwmac: fix 'mac-mode' typeAlexandru Ardelean
The 'mac-mode' property is similar to 'phy-mode' and 'phy-connection-type', which are enums of mode strings. The 'dwmac' driver supports almost all modes declared in the 'phy-mode' enum (except for 1 or 2). But in general, there may be a case where 'mac-mode' becomes more generic and is moved as part of phylib or netdev. In any case, the 'mac-mode' field should be made an enum, and it also makes sense to just reference the 'phy-connection-type' from 'ethernet-controller.yaml'. That will also make it more future-proof for new modes. Fixes: 9c15d3597c62 ("dt-bindings: net: dwmac: document 'mac-mode' property") Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-09-19dt-bindings: net: Correct the documentation of KSZ9021 skew valuesJames Byrne
The documentation of skew values for the KSZ9021 PHY was misleading because the driver implementation followed the erroneous information given in the original KSZ9021 datasheet before it was corrected in revision 1.2 (Feb 2014). It is probably too late to correct the driver now because of the many existing device trees, so instead this just corrects the documentation to explain that what you actually get is not what you might think when looking at the device tree. Signed-off-by: James Byrne <james.byrne@origamienergy.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-09-18Merge tag 'ovl-fixes-5.3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs Pull overlayfs fixes from Miklos Szeredi: "Fix a regression in docker introduced by overlayfs changes in 4.19. Also fix a couple of miscellaneous bugs" * tag 'ovl-fixes-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs: ovl: filter of trusted xattr results in audit ovl: Fix dereferencing possible ERR_PTR() ovl: fix regression caused by overlapping layers detection
2019-09-18Merge tag 'fsverity-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt Pull fs-verity support from Eric Biggers: "fs-verity is a filesystem feature that provides Merkle tree based hashing (similar to dm-verity) for individual readonly files, mainly for the purpose of efficient authenticity verification. This pull request includes: (a) The fs/verity/ support layer and documentation. (b) fs-verity support for ext4 and f2fs. Compared to the original fs-verity patchset from last year, the UAPI to enable fs-verity on a file has been greatly simplified. Lots of other things were cleaned up too. fs-verity is planned to be used by two different projects on Android; most of the userspace code is in place already. Another userspace tool ("fsverity-utils"), and xfstests, are also available. e2fsprogs and f2fs-tools already have fs-verity support. Other people have shown interest in using fs-verity too. I've tested this on ext4 and f2fs with xfstests, both the existing tests and the new fs-verity tests. This has also been in linux-next since July 30 with no reported issues except a couple minor ones I found myself and folded in fixes for. Ted and I will be co-maintaining fs-verity" * tag 'fsverity-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt: f2fs: add fs-verity support ext4: update on-disk format documentation for fs-verity ext4: add fs-verity read support ext4: add basic fs-verity support fs-verity: support builtin file signatures fs-verity: add SHA-512 support fs-verity: implement FS_IOC_MEASURE_VERITY ioctl fs-verity: implement FS_IOC_ENABLE_VERITY ioctl fs-verity: add data verification hooks for ->readpages() fs-verity: add the hook for file ->setattr() fs-verity: add the hook for file ->open() fs-verity: add inode and superblock fields fs-verity: add Kconfig and the helper functions for hashing fs: uapi: define verity bit for FS_IOC_GETFLAGS fs-verity: add UAPI header fs-verity: add MAINTAINERS file entry fs-verity: add a documentation file
2019-09-18Merge tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscryptLinus Torvalds
Pull fscrypt updates from Eric Biggers: "This is a large update to fs/crypto/ which includes: - Add ioctls that add/remove encryption keys to/from a filesystem-level keyring. These fix user-reported issues where e.g. an encrypted home directory can break NetworkManager, sshd, Docker, etc. because they don't get access to the needed keyring. These ioctls also provide a way to lock encrypted directories that doesn't use the vm.drop_caches sysctl, so is faster, more reliable, and doesn't always need root. - Add a new encryption policy version ("v2") which switches to a more standard, secure, and flexible key derivation function, and starts verifying that the correct key was supplied before using it. The key derivation improvement is needed for its own sake as well as for ongoing feature work for which the current way is too inflexible. Work is in progress to update both Android and the 'fscrypt' userspace tool to use both these features. (Working patches are available and just need to be reviewed+merged.) Chrome OS will likely use them too. This has also been tested on ext4, f2fs, and ubifs with xfstests -- both the existing encryption tests, and the new tests for this. This has also been in linux-next since Aug 16 with no reported issues. I'm also using an fscrypt v2-encrypted home directory on my personal desktop" * tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt: (27 commits) ext4 crypto: fix to check feature status before get policy fscrypt: document the new ioctls and policy version ubifs: wire up new fscrypt ioctls f2fs: wire up new fscrypt ioctls ext4: wire up new fscrypt ioctls fscrypt: require that key be added when setting a v2 encryption policy fscrypt: add FS_IOC_REMOVE_ENCRYPTION_KEY_ALL_USERS ioctl fscrypt: allow unprivileged users to add/remove keys for v2 policies fscrypt: v2 encryption policy support fscrypt: add an HKDF-SHA512 implementation fscrypt: add FS_IOC_GET_ENCRYPTION_KEY_STATUS ioctl fscrypt: add FS_IOC_REMOVE_ENCRYPTION_KEY ioctl fscrypt: add FS_IOC_ADD_ENCRYPTION_KEY ioctl fscrypt: rename keyinfo.c to keysetup.c fscrypt: move v1 policy key setup to keysetup_v1.c fscrypt: refactor key setup code in preparation for v2 policies fscrypt: rename fscrypt_master_key to fscrypt_direct_key fscrypt: add ->ci_inode to fscrypt_info fscrypt: use FSCRYPT_* definitions, not FS_* fscrypt: use FSCRYPT_ prefix for uapi constants ...
2019-09-18Merge tag 'filelock-v5.4-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux Pull file locking updates from Jeff Layton: "Just a couple of minor bugfixes, a revision to a tracepoint to account for some earlier changes to the internals, and a patch to add a pr_warn message when someone tries to mount a filesystem with '-o mand' on a kernel that has that support disabled" * tag 'filelock-v5.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux: locks: fix a memory leak bug in __break_lease() locks: print a warning when mount fails due to lack of "mand" support locks: Fix procfs output for file leases locks: revise generic_add_lease tracepoint
2019-09-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextLinus Torvalds
Pull networking updates from David Miller: 1) Support IPV6 RA Captive Portal Identifier, from Maciej Żenczykowski. 2) Use bio_vec in the networking instead of custom skb_frag_t, from Matthew Wilcox. 3) Make use of xmit_more in r8169 driver, from Heiner Kallweit. 4) Add devmap_hash to xdp, from Toke Høiland-Jørgensen. 5) Support all variants of 5750X bnxt_en chips, from Michael Chan. 6) More RTNL avoidance work in the core and mlx5 driver, from Vlad Buslov. 7) Add TCP syn cookies bpf helper, from Petar Penkov. 8) Add 'nettest' to selftests and use it, from David Ahern. 9) Add extack support to drop_monitor, add packet alert mode and support for HW drops, from Ido Schimmel. 10) Add VLAN offload to stmmac, from Jose Abreu. 11) Lots of devm_platform_ioremap_resource() conversions, from YueHaibing. 12) Add IONIC driver, from Shannon Nelson. 13) Several kTLS cleanups, from Jakub Kicinski. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1930 commits) mlxsw: spectrum_buffers: Add the ability to query the CPU port's shared buffer mlxsw: spectrum: Register CPU port with devlink mlxsw: spectrum_buffers: Prevent changing CPU port's configuration net: ena: fix incorrect update of intr_delay_resolution net: ena: fix retrieval of nonadaptive interrupt moderation intervals net: ena: fix update of interrupt moderation register net: ena: remove all old adaptive rx interrupt moderation code from ena_com net: ena: remove ena_restore_ethtool_params() and relevant fields net: ena: remove old adaptive interrupt moderation code from ena_netdev net: ena: remove code duplication in ena_com_update_nonadaptive_moderation_interval _*() net: ena: enable the interrupt_moderation in driver_supported_features net: ena: reimplement set/get_coalesce() net: ena: switch to dim algorithm for rx adaptive interrupt moderation net: ena: add intr_moder_rx_interval to struct ena_com_dev and use it net: phy: adin: implement Energy Detect Powerdown mode via phy-tunable ethtool: implement Energy Detect Powerdown support via phy-tunable xen-netfront: do not assume sk_buff_head list is empty in error handling s390/ctcm: Delete unnecessary checks before the macro call “dev_kfree_skb” net: ena: don't wake up tx queue when down drop_monitor: Better sanitize notified packets ...
2019-09-18Merge branch 'linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto updates from Herbert Xu: "API: - Add the ability to abort a skcipher walk. Algorithms: - Fix XTS to actually do the stealing. - Add library helpers for AES and DES for single-block users. - Add library helpers for SHA256. - Add new DES key verification helper. - Add surrounding bits for ESSIV generator. - Add accelerations for aegis128. - Add test vectors for lzo-rle. Drivers: - Add i.MX8MQ support to caam. - Add gcm/ccm/cfb/ofb aes support in inside-secure. - Add ofb/cfb aes support in media-tek. - Add HiSilicon ZIP accelerator support. Others: - Fix potential race condition in padata. - Use unbound workqueues in padata" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (311 commits) crypto: caam - Cast to long first before pointer conversion crypto: ccree - enable CTS support in AES-XTS crypto: inside-secure - Probe transform record cache RAM sizes crypto: inside-secure - Base RD fetchcount on actual RD FIFO size crypto: inside-secure - Base CD fetchcount on actual CD FIFO size crypto: inside-secure - Enable extended algorithms on newer HW crypto: inside-secure: Corrected configuration of EIP96_TOKEN_CTRL crypto: inside-secure - Add EIP97/EIP197 and endianness detection padata: remove cpu_index from the parallel_queue padata: unbind parallel jobs from specific CPUs padata: use separate workqueues for parallel and serial work padata, pcrypt: take CPU hotplug lock internally in padata_alloc_possible crypto: pcrypt - remove padata cpumask notifier padata: make padata_do_parallel find alternate callback CPU workqueue: require CPU hotplug read exclusion for apply_workqueue_attrs workqueue: unconfine alloc/apply/free_workqueue_attrs() padata: allocate workqueue internally arm64: dts: imx8mq: Add CAAM node random: Use wait_event_freezable() in add_hwgenerator_randomness() crypto: ux500 - Fix COMPILE_TEST warnings ...
2019-09-18Merge tag 'char-misc-5.4-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver updates from Greg KH: "Here is the big char/misc driver pull request for 5.4-rc1. As has been happening in previous releases, more and more individual driver subsystem trees are ending up in here. Now if that is good or bad I can't tell, but hopefully it makes your life easier as it's more of an aggregation of trees together to one merge point for you. Anyway, lots of stuff in here: - habanalabs driver updates - thunderbolt driver updates - misc driver updates - coresight and intel_th hwtracing driver updates - fpga driver updates - extcon driver updates - some dma driver updates - char driver updates - android binder driver updates - nvmem driver updates - phy driver updates - parport driver fixes - pcmcia driver fix - uio driver updates - w1 driver updates - configfs fixes - other assorted driver updates All of these have been in linux-next for a long time with no reported issues" * tag 'char-misc-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (200 commits) misc: mic: Use PTR_ERR_OR_ZERO rather than its implementation habanalabs: correctly cast variable to __le32 habanalabs: show correct id in error print habanalabs: stop using the acronym KMD habanalabs: display card name as sensors header habanalabs: add uapi to retrieve aggregate H/W events habanalabs: add uapi to retrieve device utilization habanalabs: Make the Coresight timestamp perpetual habanalabs: explicitly set the queue-id enumerated numbers habanalabs: print to kernel log when reset is finished habanalabs: replace __le32_to_cpu with le32_to_cpu habanalabs: replace __cpu_to_le32/64 with cpu_to_le32/64 habanalabs: Handle HW_IP_INFO if device disabled or in reset habanalabs: Expose devices after initialization is done habanalabs: improve security in Debug IOCTL habanalabs: use default structure for user input in Debug IOCTL habanalabs: Add descriptive name to PSOC app status register habanalabs: Add descriptive names to PSOC scratch-pad registers habanalabs: create two char devices per ASIC habanalabs: change device_setup_cdev() to be more generic ...
2019-09-18Merge tag 'staging-5.4-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging and IIO driver updates from Greg KH: "Here is the big staging/iio driver update for 5.4-rc1. Lots of churn here, with a few driver/filesystems moving out of staging finally: - erofs moved out of staging - greybus core code moved out of staging Along with that, a new filesytem has been added: - extfat to provide support for those devices requiring that filesystem (i.e. transfer devices to/from windows systems or printers) Other than that, there a number of new IIO drivers, and lots and lots and lots of staging driver cleanups and minor fixes as people continue to dig into those for easy changes. All of these have been in linux-next for a while with no reported issues" * tag 'staging-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (453 commits) Staging: gasket: Use temporaries to reduce line length. Staging: octeon: Avoid several usecases of strcpy staging: vhciq_core: replace snprintf with scnprintf staging: wilc1000: avoid twice IRQ handler execution for each single interrupt staging: wilc1000: remove unused interrupt status handling code staging: fbtft: make several arrays static const, makes object smaller staging: rtl8188eu: make two arrays static const, makes object smaller staging: rtl8723bs: core: Remove Macro "IS_MAC_ADDRESS_BROADCAST" dt-bindings: anybus-controller: move to staging/ tree staging: emxx_udc: remove local TRUE/FALSE definition staging: wilc1000: look for rtc_clk clock staging: dt-bindings: wilc1000: add optional rtc_clk property staging: nvec: make use of devm_platform_ioremap_resource staging: exfat: drop unused function parameter Staging: exfat: Avoid use of strcpy staging: exfat: use integer constants staging: exfat: cleanup spacing for casts staging: exfat: cleanup spacing for operators staging: rtl8723bs: hal: remove redundant variable n staging: pi433: Fix typo in documentation ...
2019-09-18Merge tag 'tty-5.4-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial driver updates from Greg KH: "Even in this age, people are still making new serial port silicon, why... Anyway, here's the TTY and Serial driver update for 5.4-rc1. Lots of changes in here for a number of embedded serial port devices that are being worked on because people really like to see those console logs... Other than that, nothing major here, no core tty changes that anyone should care about. All of these have been in linux-next for a while with no reported issues" * tag 'tty-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (125 commits) serial: tegra: Add PIO mode support serial: tegra: report clk rate errors serial: tegra: add support to adjust baud rate serial: tegra: DT for Adjusted baud rates serial: tegra: add support to use 8 bytes trigger serial: tegra: set maximum num of uart ports to 8 serial: tegra: check for FIFO mode enabled status dt-binding: serial: tegra: add new chips serial: tegra: report error to upper tty layer serial: tegra: flush the RX fifo on frame error serial: tegra: avoid reg access when clk disabled serial: tegra: add support to ignore read serial: sprd: correct the wrong sequence of arguments dt-bindings: serial: Convert riscv,sifive-serial to json-schema serial: max310x: turn off transmitter before activating AutoCTS or auto transmitter flow control serial: max310x: Properly set flags in AutoCTS mode tty: serial: fix platform_no_drv_owner.cocci warnings dt-bindings: serial: Document Freescale LINFlexD UART serial: fsl_linflexuart: Update compatible string tty: n_gsm: avoid recursive locking with async port hangup ...
2019-09-18Merge tag 'usb-5.4-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB updates from Greg KH: "Here is the big set of USB patches for 5.4-rc1. Two major chunks of code are moving out of the tree and into the staging directory, uwb and wusb (wireless USB support), because there are no devices that actually use this protocol anymore, and what we have today probably doesn't work at all given that the maintainers left many many years ago. So move it to staging where it will be removed in a few releases if no one screams. Other than that, lots of little things. The usual gadget and xhci and usb serial driver updates, along with a bunch of sysfs file cleanups due to the driver core changes to support that. Nothing really major, just constant forward progress. All of these have been in linux-next for a while with no reported issues" * tag 'usb-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (159 commits) USB: usbcore: Fix slab-out-of-bounds bug during device reset usb: cdns3: Remove redundant dev_err call in cdns3_probe() USB: rio500: Fix lockdep violation USB: rio500: simplify locking usb: mtu3: register a USB Role Switch for dual role mode usb: common: add USB GPIO based connection detection driver usb: common: create Kconfig file usb: roles: get usb-role-switch from parent usb: roles: Add fwnode_usb_role_switch_get() function device connection: Add fwnode_connection_find_match() usb: roles: Introduce stubs for the exiting functions in role.h dt-bindings: usb: mtu3: add properties about USB Role Switch dt-bindings: usb: add binding for USB GPIO based connection detection driver dt-bindings: connector: add optional properties for Type-B dt-binding: usb: add usb-role-switch property usbip: Implement SG support to vhci-hcd and stub driver usb: roles: intel: Enable static DRD mode for role switch xhci-ext-caps.c: Add property to disable Intel SW switch usb: dwc3: remove generic PHY calibrate() calls usb: core: phy: add support for PHY calibration ...
2019-09-18Merge tag 'driver-core-5.4-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg Kroah-Hartman: "Here is the big driver core update for 5.4-rc1. There was a bit of a churn in here, with a number of core and OF platform patches being added to the tree, and then after much discussion and review and a day-long in-person meeting, they were decided to be reverted and a new set of patches is currently being reviewed on the mailing list. Other than that churn, there are two "persistent" branches in here that other trees will be pulling in as well during the merge window. One branch to add support for drivers to have the driver core automatically add sysfs attribute files when a driver is bound to a device so that the driver doesn't have to manually do it (and then clean it up, as it always gets it wrong). There's another branch in here for generic lookup helpers for the driver core that lots of busses are starting to use. That's the majority of the non-driver-core changes in this patch series. There's also some on-going debugfs file creation cleanup that has been slowly happening over the past few releases, with the goal to hopefully get that done sometime next year. All of these have been in linux-next for a while now with no reported issues" [ Note that the above-mentioned generic lookup helpers branch was already brought in by the LED merge (commit 4feaab05dc1e) that had shared it. Also note that that common branch introduced an i2c bug due to a bad conversion, which got fixed here. - Linus ] * tag 'driver-core-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (49 commits) coccinelle: platform_get_irq: Fix parse error driver-core: add include guard to linux/container.h sysfs: add BIN_ATTR_WO() macro driver core: platform: Export platform_get_irq_optional() hwmon: pwm-fan: Use platform_get_irq_optional() driver core: platform: Introduce platform_get_irq_optional() Revert "driver core: Add support for linking devices during device addition" Revert "driver core: Add edit_links() callback for drivers" Revert "of/platform: Add functional dependency link from DT bindings" Revert "driver core: Add sync_state driver/bus callback" Revert "of/platform: Pause/resume sync state during init and of_platform_populate()" Revert "of/platform: Create device links for all child-supplier depencencies" Revert "of/platform: Don't create device links for default busses" Revert "of/platform: Fix fn definitons for of_link_is_valid() and of_link_property()" Revert "of/platform: Fix device_links_supplier_sync_state_resume() warning" Revert "of/platform: Disable generic device linking code for PowerPC" devcoredump: fix typo in comment devcoredump: use memory_read_from_buffer of/platform: Disable generic device linking code for PowerPC device.h: Fix warnings for mismatched parameter names in comments ...
2019-09-18Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull KVM updates from Paolo Bonzini: "s390: - ioctl hardening - selftests ARM: - ITS translation cache - support for 512 vCPUs - various cleanups and bugfixes PPC: - various minor fixes and preparation x86: - bugfixes all over the place (posted interrupts, SVM, emulation corner cases, blocked INIT) - some IPI optimizations" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (75 commits) KVM: X86: Use IPI shorthands in kvm guest when support KVM: x86: Fix INIT signal handling in various CPU states KVM: VMX: Introduce exit reason for receiving INIT signal on guest-mode KVM: VMX: Stop the preemption timer during vCPU reset KVM: LAPIC: Micro optimize IPI latency kvm: Nested KVM MMUs need PAE root too KVM: x86: set ctxt->have_exception in x86_decode_insn() KVM: x86: always stop emulation on page fault KVM: nVMX: trace nested VM-Enter failures detected by H/W KVM: nVMX: add tracepoint for failed nested VM-Enter x86: KVM: svm: Fix a check in nested_svm_vmrun() KVM: x86: Return to userspace with internal error on unexpected exit reason KVM: x86: Add kvm_emulate_{rd,wr}msr() to consolidate VXM/SVM code KVM: x86: Refactor up kvm_{g,s}et_msr() to simplify callers doc: kvm: Fix return description of KVM_SET_MSRS KVM: X86: Tune PLE Window tracepoint KVM: VMX: Change ple_window type to unsigned int KVM: X86: Remove tailing newline for tracepoints KVM: X86: Trace vcpu_id for vmexit KVM: x86: Manually calculate reserved bits when loading PDPTRS ...
2019-09-17Merge tag 'acpi-5.4-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI updates from Rafael Wysocki: "These include an ACPICA update (to upstream revision 20190816), improvements of support for memory hot-add in the HMAT handling code and some assorted fixes and cleanups. Specifics: - Update the ACPICA code in the kernel to upstream revision 20190816 including: * Internal limits change to support larger systems (Bob Moore). * Macros clean up (Bob Moore). * printf format string fixes (Bob Moore). * Full deployment of the ACPI_PRINTF_LIKE macro (Bob Moore). * Tools improvements (Bob Moore, Colin Ian King). * Windows _OSI support fixes (Jung-uk Kim). - Improve memory hot-add support in the ACPI HMAT handling code (Dan Williams, Keith Busch). - Fix the ACPI LPSS (Low-Power Subsystem) driver for Intel SoCs to save and restore private registers during system-wide suspend and resume on systems with the Lynxpoint PCH (Jarkko Nikula). - Convert the ACPI documentation related to LEDs to ReST (Sakari Ailus). - Fix assorted issues and make assorted minor improvements in the ACPI-related code (Al Stone, Andy Shevchenko, Jiri Slaby, Kelsey Skunberg, Krzysztof Wilczynski, Liguang Zhang, Wenwen Wang, YueHaibing)" * tag 'acpi-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (23 commits) ACPI / PCI: fix acpi_pci_irq_enable() memory leak ACPI: custom_method: fix memory leaks ACPI: thermal: Remove redundant acpi_has_method() calls ACPI / CPPC: do not require the _PSD method ACPI: SBS: remove unused const variable 'SMBUS_PEC' ACPI / LPSS: Save/restore LPSS private registers also on Lynxpoint ACPI/PCI: Remove surplus parentheses from a return statement ACPICA: Update version to 20190816. ACPICA: Add "Windows 2019" string to _OSI support. ACPICA: Differentiate Windows 8.1 from Windows 8. ACPICA: Fully deploy ACPI_PRINTF_LIKE macro ACPICA: iASL,acpi_dump: Improve y/n query ACPICA: Fix issues with arg types within printf format strings ACPICA: Macros: remove pointer math on a null pointer ACPICA: Increase total number of possible Owner IDs ACPICA: Debugger: remove redundant assignment on obj_desc Documentation: ACPI: DSD: Convert LED documentation to ReST ACPI / APEI: Release resources if gen_pool_add() fails HMAT: Skip publishing target info for nodes with no online memory HMAT: Register attributes for memory hot add ...
2019-09-17Merge tag 'pm-5.4-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management updates from Rafael Wysocki: "These include a rework of the main suspend-to-idle code flow (related to the handling of spurious wakeups), a switch over of several users of cpufreq notifiers to QoS-based limits, a new devfreq driver for Tegra20, a new cpuidle driver and governor for virtualized guests, an extension of the wakeup sources framework to expose wakeup sources as device objects in sysfs, and more. Specifics: - Rework the main suspend-to-idle control flow to avoid repeating "noirq" device resume and suspend operations in case of spurious wakeups from the ACPI EC and decouple the ACPI EC wakeups support from the LPS0 _DSM support (Rafael Wysocki). - Extend the wakeup sources framework to expose wakeup sources as device objects in sysfs (Tri Vo, Stephen Boyd). - Expose system suspend statistics in sysfs (Kalesh Singh). - Introduce a new haltpoll cpuidle driver and a new matching governor for virtualized guests wanting to do guest-side polling in the idle loop (Marcelo Tosatti, Joao Martins, Wanpeng Li, Stephen Rothwell). - Fix the menu and teo cpuidle governors to allow the scheduler tick to be stopped if PM QoS is used to limit the CPU idle state exit latency in some cases (Rafael Wysocki). - Increase the resolution of the play_idle() argument to microseconds for more fine-grained injection of CPU idle cycles (Daniel Lezcano). - Switch over some users of cpuidle notifiers to the new QoS-based frequency limits and drop the CPUFREQ_ADJUST and CPUFREQ_NOTIFY policy notifier events (Viresh Kumar). - Add new cpufreq driver based on nvmem for sun50i (Yangtao Li). - Add support for MT8183 and MT8516 to the mediatek cpufreq driver (Andrew-sh.Cheng, Fabien Parent). - Add i.MX8MN support to the imx-cpufreq-dt cpufreq driver (Anson Huang). - Add qcs404 to cpufreq-dt-platdev blacklist (Jorge Ramirez-Ortiz). - Update the qcom cpufreq driver (among other things, to make it easier to extend and to use kryo cpufreq for other nvmem-based SoCs) and add qcs404 support to it (Niklas Cassel, Douglas RAILLARD, Sibi Sankar, Sricharan R). - Fix assorted issues and make assorted minor improvements in the cpufreq code (Colin Ian King, Douglas RAILLARD, Florian Fainelli, Gustavo Silva, Hariprasad Kelam). - Add new devfreq driver for NVidia Tegra20 (Dmitry Osipenko, Arnd Bergmann). - Add new Exynos PPMU events to devfreq events and extend that mechanism (Lukasz Luba). - Fix and clean up the exynos-bus devfreq driver (Kamil Konieczny). - Improve devfreq documentation and governor code, fix spelling typos in devfreq (Ezequiel Garcia, Krzysztof Kozlowski, Leonard Crestez, MyungJoo Ham, Gaël PORTAY). - Add regulators enable and disable to the OPP (operating performance points) framework (Kamil Konieczny). - Update the OPP framework to support multiple opp-suspend properties (Anson Huang). - Fix assorted issues and make assorted minor improvements in the OPP code (Niklas Cassel, Viresh Kumar, Yue Hu). - Clean up the generic power domains (genpd) framework (Ulf Hansson). - Clean up assorted pieces of power management code and documentation (Akinobu Mita, Amit Kucheria, Chuhong Yuan). - Update the pm-graph tool to version 5.5 including multiple fixes and improvements (Todd Brandt). - Update the cpupower utility (Benjamin Weis, Geert Uytterhoeven, Sébastien Szymanski)" * tag 'pm-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (126 commits) cpuidle-haltpoll: Enable kvm guest polling when dedicated physical CPUs are available cpuidle-haltpoll: do not set an owner to allow modunload cpuidle-haltpoll: return -ENODEV on modinit failure cpuidle-haltpoll: set haltpoll as preferred governor cpuidle: allow governor switch on cpuidle_register_driver() PM: runtime: Documentation: add runtime_status ABI document pm-graph: make setVal unbuffered again for python2 and python3 powercap: idle_inject: Use higher resolution for idle injection cpuidle: play_idle: Increase the resolution to usec cpuidle-haltpoll: vcpu hotplug support cpufreq: Add qcs404 to cpufreq-dt-platdev blacklist cpufreq: qcom: Add support for qcs404 on nvmem driver cpufreq: qcom: Refactor the driver to make it easier to extend cpufreq: qcom: Re-organise kryo cpufreq to use it for other nvmem based qcom socs dt-bindings: opp: Add qcom-opp bindings with properties needed for CPR dt-bindings: opp: qcom-nvmem: Support pstates provided by a power domain Documentation: cpufreq: Update policy notifier documentation cpufreq: Remove CPUFREQ_ADJUST and CPUFREQ_NOTIFY policy notifier events PM / Domains: Verify PM domain type in dev_pm_genpd_set_performance_state() PM / Domains: Simplify genpd_lookup_dev() ...
2019-09-17Merge tag 'dmaengine-5.4-rc1' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds
Pull dmaengine updates from Vinod Koul: - Move Dmaengine DT bindings to YAML and convert Allwinner to schema. - FSL dma device_synchronize implementation - DW split acpi and of helpers and updates to driver and support for Elkhart Lake - Move filter fn as private for omap-dma and edma drivers and improvements to these drivers - Mark expected switch fall-through in couple of drivers - Renames of shdma and nbpfaxi binding document - Minor updates to bunch of drivers * tag 'dmaengine-5.4-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (55 commits) dmaengine: ti: edma: Use bitmap_set() instead of open coded edma_set_bits() dmaengine: ti: edma: Only reset region0 access registers dmaengine: ti: edma: Do not reset reserved paRAM slots dmaengine: iop-adma.c: fix printk format warning dmaengine: stm32-dma: Use struct_size() helper dt-bindings: dmaengine: dma-common: Fix the dma-channel-mask property dmanegine: ioat/dca: Use struct_size() helper dmaengine: iop-adma: remove set but not used variable 'slots_per_op' dmaengine: dmatest: Add support for completion polling dmaengine: ti: omap-dma: Remove variable override in omap_dma_tx_status() dmaengine: ti: omap-dma: Remove 'Assignment in if condition' dmaengine: ti: edma: Remove 'Assignment in if condition' dmaengine: dw: platform: Split OF helpers to separate module dmaengine: dw: platform: Split ACPI helpers to separate module dmaengine: dw: platform: Move handle check to dw_dma_acpi_controller_register() dmaengine: dw: platform: Switch to acpi_dma_controller_register() dmaengine: dw: platform: Use devm_platform_ioremap_resource() dmaengine: dw: platform: Enable iDMA 32-bit on Intel Elkhart Lake dmaengine: dw: platform: Use struct dw_dma_chip_pdata dmaengine: dw: Export struct dw_dma_chip_pdata for wider use ...
2019-09-17Merge tag 'leds-for-5.4-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds Pull LED updates from Jacek Anaszewski: "In this cycle we've finally managed to contribute the patch set sorting out LED naming issues. Besides that there are many changes scattered among various LED class drivers and triggers. LED naming related improvements: - add new 'function' and 'color' fwnode properties and deprecate 'label' property which has been frequently abused for conveying vendor specific names that have been available in sysfs anyway - introduce a set of standard LED_FUNCTION* definitions - introduce a set of standard LED_COLOR_ID* definitions - add a new {devm_}led_classdev_register_ext() API with the capability of automatic LED name composition basing on the properties available in the passed fwnode; the function is backwards compatible in a sense that it uses 'label' data, if present in the fwnode, for creating LED name - add tools/leds/get_led_device_info.sh script for retrieving LED vendor, product and bus names, if applicable; it also performs basic validation of an LED name - update following drivers and their DT bindings to use the new LED registration API: - leds-an30259a, leds-gpio, leds-as3645a, leds-aat1290, leds-cr0014114, leds-lm3601x, leds-lm3692x, leds-lp8860, leds-lt3593, leds-sc27xx-blt Other LED class improvements: - replace {devm_}led_classdev_register() macros with inlines - allow to call led_classdev_unregister() unconditionally - switch to use fwnode instead of be stuck with OF one LED triggers improvements: - led-triggers: - fix dereferencing of null pointer - fix a memory leak bug - ledtrig-gpio: - GPIO 0 is valid Drop superseeded apu2/3 support from leds-apu since for apu2+ a newer, more complete driver exists, based on a generic driver for the AMD SOCs gpio-controller, supporting LEDs as well other devices: - drop profile field from priv data - drop iosize field from priv data - drop enum_apu_led_platform_types - drop superseeded apu2/3 led support - add pr_fmt prefix for better log output - fix error message on probing failure Other misc fixes and improvements to existing LED class drivers: - leds-ns2, leds-max77650: - add of_node_put() before return - leds-pwm, leds-is31fl32xx: - use struct_size() helper - leds-lm3697, leds-lm36274, leds-lm3532: - switch to use fwnode_property_count_uXX() - leds-lm3532: - fix brightness control for i2c mode - change the define for the fs current register - fixes for the driver for stability - add full scale current configuration - dt: Add property for full scale current. - avoid potentially unpaired regulator calls - move static keyword to the front of declarations - fix optional led-max-microamp prop error handling - leds-max77650: - add of_node_put() before return - add MODULE_ALIAS() - Switch to fwnode property API - leds-as3645a: - fix misuse of strlcpy - leds-netxbig: - add of_node_put() in netxbig_leds_get_of_pdata() - remove legacy board-file support - leds-is31fl319x: - simplify getting the adapter of a client - leds-ti-lmu-common: - fix coccinelle issue - move static keyword to the front of declaration - leds-syscon: - use resource managed variant of device register - leds-ktd2692: - fix a typo in the name of a constant - leds-lp5562: - allow firmware files up to the maximum length - leds-an30259a: - fix typo - leds-pca953x: - include the right header" * tag 'leds-for-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds: (72 commits) leds: lm3532: Fix optional led-max-microamp prop error handling led: triggers: Fix dereferencing of null pointer leds: ti-lmu-common: Move static keyword to the front of declaration leds: lm3532: Move static keyword to the front of declarations leds: trigger: gpio: GPIO 0 is valid leds: pwm: Use struct_size() helper leds: is31fl32xx: Use struct_size() helper leds: ti-lmu-common: Fix coccinelle issue in TI LMU leds: lm3532: Avoid potentially unpaired regulator calls leds: syscon: Use resource managed variant of device register leds: Replace {devm_}led_classdev_register() macros with inlines leds: Allow to call led_classdev_unregister() unconditionally leds: lm3532: Add full scale current configuration dt: lm3532: Add property for full scale current. leds: lm3532: Fixes for the driver for stability leds: lm3532: Change the define for the fs current register leds: lm3532: Fix brightness control for i2c mode leds: Switch to use fwnode instead of be stuck with OF one leds: max77650: Switch to fwnode property API led: triggers: Fix a memory leak bug ...
2019-09-17Merge tag 'media/v5.4-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: - a new sensor driver for ov5675 - a new platform driver for Allwinner A10 sensor interface - some new remote controller keymaps - some cosmetic changes at V4L2 core in order to avoid #ifdefs and to merge two core modules into one - removal of bcm2048 radio driver from staging - removal of davinci_vpfe video driver from staging - regression fix since Kernel 5.1 at the legacy VideoBuffer version 1 core - added some documentation for remote controller protocols - pixel format documentation was split on two files - lots of other driver improvements and cleanups * tag 'media/v5.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (321 commits) media: videobuf-core.c: poll_wait needs a non-NULL buf pointer media: sun4i: Make sun4i_csi_formats static media: imx: remove unused including <linux/version.h> media: stm32-dcmi: Delete an unnecessary of_node_put() call in dcmi_probe() media: pvrusb2: qctrl.flag will be uninitlaized if cx2341x_ctrl_query() returns error code media: em28xx: Fix exception handling in em28xx_alloc_urbs() media: don't do a 31 bit shift on a signed int media: use the BIT() macro media: ov9650: add a sanity check media: aspeed-video: address a protential usage of an unitialized var media: vicodec: make life easier for static analyzers media: remove include stdarg.h from some drivers v4l2-core: fix coding style for the two new c files media: v4l2-core: Remove BUG() from i2c and spi helpers media: v4l2-core: introduce a helper to unregister a i2c subdev media: v4l2-core: introduce a helper to unregister a spi subdev media: v4l2-core: move i2c helpers out of v4l2-common.c media: v4l2-core: move spi helpers out of v4l2-common.c media: v4l2-core: Module re-organization media: usbvision: Remove dead code ...
2019-09-17Merge tag 'sound-5.4-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound updates from Takashi Iwai: "As shown in diffstat and logs, it was again a busy development cycle at this time, too. The most significant changes are still on-going refactoring / modernization works for ASoC core and drivers, but there are lots of other changes as well. Here we go, some highlights below: ASoC: - Quite a lot of cleanup / refactoring of ASoC core and APIs; most of them are systematic, but also including cleanups and modernization - A bulk of updates for some ASoC platforms, Freescale, sunxi and Intel SST/SOF - Initial support for Sound Open Firmware on i.MX8 - Removal of deprecated w90x900 and nuc900 drivers - New support for Cirrus Logic CS47L15 and CS47L92, Freescale i.MX 7ULP and 8MQ, Meson G12A and NXP UDA1334 USB-audio: - More validations of descriptor units for hardening against bugs reported by fuzzers - PCM device assignment workaround for a past call-order change - Scarlett Gen2 mixer interface, a few more more quirks HD-audio: - Support for audio component with AMD/ATI and Nvidia HDMI codecs - Clean up HD-audio core and remove indirect access ops for Intel SOF - DMIC detection at probe; it would make systems automatically falling back to SST/SOF driver on devices that need DMIC handling. Needs a new Kconfig to set, and beware that it's still new and a bit experimental FireWire: - Lots of code refactoring and cleanups" * tag 'sound-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (521 commits) ASoC: sdm845: remove unneeded semicolon ASoC: fsl_sai: Implement set_bclk_ratio ASoC: dmaengine: Replace strncpy() with strscpy_pad() for pcm->name ASoC: wcd9335: remove redundant use of ret variable ALSA: firewire-tascam: check intermediate state of clock status and retry ALSA: firewire-tascam: handle error code when getting current source of clock ASoC: hdmi-codec: Add an op to set callback function for plug event ASoC: rt5677: keep analog power register at SND_SOC_BIAS_OFF ASoC: rt5677: Remove magic number register writes ASoC: soc-core: self contained soc_unbind_aux_dev() ASoC: soc-core: add soc_unbind_aux_dev() ASoC: soc-core: self contained soc_bind_aux_dev() ASoC: soc-core: move soc_probe_link_dais() next to soc_remove_link_dais() ASoC: soc-core: self contained soc_probe_link_dais() ASoC: soc-core: add new soc_link_init() ASoC: soc-core: move soc_probe_dai() next to soc_remove_dai() ASoC: soc-core: self contained soc_remove_link_dais() ASoC: soc-core: self contained soc_remove_link_components() ASoC: soc-core: self contained soc_probe_link_components() ASoC: rt1308: make array pd static const, makes object smaller ...
2019-09-17Merge tag 'mmc-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmcLinus Torvalds
Pull MMC updates from Ulf Hansson: "MMC core: - Fixup processing of SDIO IRQs during system suspend/resume - Add helper function to indicate if SDIO IRQs is enabled MMC host: - bcm2835: Take SWIOTLB memory size limitation into account - dw_mmc: Improve SDIO IRQs support - mtk-sd: Various improvements - mtk-sd: Improve SDIO IRQs support - sdhci-iproc: Add support for emmc2 of the BCM2711 - sdhci-of-arasan: Add Support for Intel LGM eMMC - sdhci-of-aspeed: Add support for the ASPEED SD controller - sdhci-of-esdhc: Deal with erratum A011334 support in ls1028a 1.0 SoC - sdhci-pci: Prepare to add support of Genesys Logic GL975x - sdhci-pci: Add another Id for Intel CML - sdhci-pci-o2micro: Fix O2 Host data read/write DLL Lock phase shift issue - sunxi: Add support for H5 compatibles" * tag 'mmc-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (59 commits) ms_block: fix spelling mistake "randomally" -> "randomly" mmc: dw_mmc: hi3798cv200: make array degrees static const, makes object smaller mmc: sdhci: Convert to use sdio_irq_claimed() mmc: sdhci: Drop redundant code for SDIO IRQs mmc: sdhci: Drop redundant check in sdhci_ack_sdio_irq() mmc: core: Fixup processing of SDIO IRQs during system suspend/resume mmc: core: WARN if SDIO IRQs are enabled for non-powered card in suspend mmc: core: Clarify that the ->ack_sdio_irq() callback is mandatory mmc: core: Clarify sdio_irq_pending flag for MMC_CAP2_SDIO_IRQ_NOTHREAD mmc: core: Move code to get pending SDIO IRQs to a function mmc: mtk-sd: Re-store SDIO IRQs mask at system resume mmc: dw_mmc: Re-store SDIO IRQs mask at system resume mmc: core: Add helper function to indicate if SDIO IRQs is enabled mmc: sdhci-pci-o2micro: Fix O2 Host data read/write DLL Lock phase shift issue mmc: sdhci-pci-o2micro: Move functions in preparation to fix DLL lock phase shift issue mmc: sdhci-pci-o2micro: Change O2 Host PLL and DLL register name mmc: sdhci: Fix incorrect switch to HS mode mmc: sdhci-of-aspeed: Depend on CONFIG_OF_ADDRESS mmc: sdhci-of-aspeed: Allow max-frequency limitation of SDCLK mmc: sdhci-of-aspeed: Uphold clocks-on post-condition of set_clock() ...
2019-09-17Merge tag 'for-5.4/block-2019-09-16' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block updates from Jens Axboe: - Two NVMe pull requests: - ana log parse fix from Anton - nvme quirks support for Apple devices from Ben - fix missing bio completion tracing for multipath stack devices from Hannes and Mikhail - IP TOS settings for nvme rdma and tcp transports from Israel - rq_dma_dir cleanups from Israel - tracing for Get LBA Status command from Minwoo - Some nvme-tcp cleanups from Minwoo, Potnuri and Myself - Some consolidation between the fabrics transports for handling the CAP register - reset race with ns scanning fix for fabrics (move fabrics commands to a dedicated request queue with a different lifetime from the admin request queue)." - controller reset and namespace scan races fixes - nvme discovery log change uevent support - naming improvements from Keith - multiple discovery controllers reject fix from James - some regular cleanups from various people - Series fixing (and re-fixing) null_blk debug printing and nr_devices checks (André) - A few pull requests from Song, with fixes from Andy, Guoqing, Guilherme, Neil, Nigel, and Yufen. - REQ_OP_ZONE_RESET_ALL support (Chaitanya) - Bio merge handling unification (Christoph) - Pick default elevator correctly for devices with special needs (Damien) - Block stats fixes (Hou) - Timeout and support devices nbd fixes (Mike) - Series fixing races around elevator switching and device add/remove (Ming) - sed-opal cleanups (Revanth) - Per device weight support for BFQ (Fam) - Support for blk-iocost, a new model that can properly account cost of IO workloads. (Tejun) - blk-cgroup writeback fixes (Tejun) - paride queue init fixes (zhengbin) - blk_set_runtime_active() cleanup (Stanley) - Block segment mapping optimizations (Bart) - lightnvm fixes (Hans/Minwoo/YueHaibing) - Various little fixes and cleanups * tag 'for-5.4/block-2019-09-16' of git://git.kernel.dk/linux-block: (186 commits) null_blk: format pr_* logs with pr_fmt null_blk: match the type of parameter nr_devices null_blk: do not fail the module load with zero devices block: also check RQF_STATS in blk_mq_need_time_stamp() block: make rq sector size accessible for block stats bfq: Fix bfq linkage error raid5: use bio_end_sector in r5_next_bio raid5: remove STRIPE_OPS_REQ_PENDING md: add feature flag MD_FEATURE_RAID0_LAYOUT md/raid0: avoid RAID0 data corruption due to layout confusion. raid5: don't set STRIPE_HANDLE to stripe which is in batch list raid5: don't increment read_errors on EILSEQ return nvmet: fix a wrong error status returned in error log page nvme: send discovery log page change events to userspace nvme: add uevent variables for controller devices nvme: enable aen regardless of the presence of I/O queues nvme-fabrics: allow discovery subsystems accept a kato nvmet: Use PTR_ERR_OR_ZERO() in nvmet_init_discovery() nvme: Remove redundant assignment of cq vector nvme: Assign subsys instance from first ctrl ...
2019-09-17Merge tag 'docs-5.4' of git://git.lwn.net/linuxLinus Torvalds
Pull documentation updates from Jonathan Corbet: "It's a somewhat calmer cycle for docs this time, as the churn of the mass RST conversion is happily mostly behind us. - A new document on reproducible builds. - We finally got around to zapping the documentation for hardware support that was removed in 2004; one doesn't want to rush these things. - The usual assortment of fixes, typo corrections, etc" * tag 'docs-5.4' of git://git.lwn.net/linux: (67 commits) Documentation: kbuild: Add document about reproducible builds docs: printk-formats: Stop encouraging use of unnecessary %h[xudi] and %hh[xudi] Documentation: Add "earlycon=sbi" to the admin guide doc:lock: remove reference to clever use of read-write lock devices.txt: improve entry for comedi (char major 98) docs: mtd: Update spi nor reference driver doc: arm64: fix grammar dtb placed in no attributes region Documentation: sysrq: don't recommend 'S' 'U' before 'B' mailmap: Update email address for Quentin Perret docs: ftrace: clarify when tracing is disabled by the trace file docs: process: fix broken link Documentation/arm/samsung-s3c24xx: Remove stray U+FEFF character to fix title Documentation/arm/sa1100/assabet: Fix 'make assabet_defconfig' command Documentation/arm/sa1100: Remove some obsolete documentation docs/zh_CN: update Chinese howto.rst for latexdocs making Documentation: virt: Fix broken reference to virt tree's index docs: Fix typo on pull requests guide kernel-doc: Allow anonymous enum Documentation: sphinx: Don't parse socket() as identifier reference Documentation: sphinx: Add missing comma to list of strings ...
2019-09-17Merge tag 's390-5.4-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 updates from Vasily Gorbik: - Add support for IBM z15 machines. - Add SHA3 and CCA AES cipher key support in zcrypt and pkey refactoring. - Move to arch_stack_walk infrastructure for the stack unwinder. - Various kasan fixes and improvements. - Various command line parsing fixes. - Improve decompressor phase debuggability. - Lift no bss usage restriction for the early code. - Use refcount_t for reference counters for couple of places in mm code. - Logging improvements and return code fix in vfio-ccw code. - Couple of zpci fixes and minor refactoring. - Remove some outdated documentation. - Fix secure boot detection. - Other various minor code clean ups. * tag 's390-5.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (48 commits) s390: remove pointless drivers-y in drivers/s390/Makefile s390/cpum_sf: Fix line length and format string s390/pci: fix MSI message data s390: add support for IBM z15 machines s390/crypto: Support for SHA3 via CPACF (MSA6) s390/startup: add pgm check info printing s390/crypto: xts-aes-s390 fix extra run-time crypto self tests finding vfio-ccw: fix error return code in vfio_ccw_sch_init() s390: vfio-ap: fix warning reset not completed s390/base: remove unused s390_base_mcck_handler s390/sclp: Fix bit checked for has_sipl s390/zcrypt: fix wrong handling of cca cipher keygenflags s390/kasan: add kdump support s390/setup: avoid using strncmp with hardcoded length s390/sclp: avoid using strncmp with hardcoded length s390/module: avoid using strncmp with hardcoded length s390/pci: avoid using strncmp with hardcoded length s390/kaslr: reserve memory for kasan usage s390/mem_detect: provide single get_mem_detect_end s390/cmma: reuse kstrtobool for option value parsing ...
2019-09-17Merge branch 'timers-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull core timer updates from Thomas Gleixner: "Timers and timekeeping updates: - A large overhaul of the posix CPU timer code which is a preparation for moving the CPU timer expiry out into task work so it can be properly accounted on the task/process. An update to the bogus permission checks will come later during the merge window as feedback was not complete before heading of for travel. - Switch the timerqueue code to use cached rbtrees and get rid of the homebrewn caching of the leftmost node. - Consolidate hrtimer_init() + hrtimer_init_sleeper() calls into a single function - Implement the separation of hrtimers to be forced to expire in hard interrupt context even when PREEMPT_RT is enabled and mark the affected timers accordingly. - Implement a mechanism for hrtimers and the timer wheel to protect RT against priority inversion and live lock issues when a (hr)timer which should be canceled is currently executing the callback. Instead of infinitely spinning, the task which tries to cancel the timer blocks on a per cpu base expiry lock which is held and released by the (hr)timer expiry code. - Enable the Hyper-V TSC page based sched_clock for Hyper-V guests resulting in faster access to timekeeping functions. - Updates to various clocksource/clockevent drivers and their device tree bindings. - The usual small improvements all over the place" * 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (101 commits) posix-cpu-timers: Fix permission check regression posix-cpu-timers: Always clear head pointer on dequeue hrtimer: Add a missing bracket and hide `migration_base' on !SMP posix-cpu-timers: Make expiry_active check actually work correctly posix-timers: Unbreak CONFIG_POSIX_TIMERS=n build tick: Mark sched_timer to expire in hard interrupt context hrtimer: Add kernel doc annotation for HRTIMER_MODE_HARD x86/hyperv: Hide pv_ops access for CONFIG_PARAVIRT=n posix-cpu-timers: Utilize timerqueue for storage posix-cpu-timers: Move state tracking to struct posix_cputimers posix-cpu-timers: Deduplicate rlimit handling posix-cpu-timers: Remove pointless comparisons posix-cpu-timers: Get rid of 64bit divisions posix-cpu-timers: Consolidate timer expiry further posix-cpu-timers: Get rid of zero checks rlimit: Rewrite non-sensical RLIMIT_CPU comment posix-cpu-timers: Respect INFINITY for hard RTTIME limit posix-cpu-timers: Switch thread group sampling to array posix-cpu-timers: Restructure expiry array posix-cpu-timers: Remove cputime_expires ...
2019-09-17Merge branch 'irq-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull core irq updates from Thomas Gleixner: "Updates from the irq departement: - Update the interrupt spreading code so it handles numa node with different CPU counts properly. - A large overhaul of the ARM GiCv3 driver to support new PPI and SPI ranges. - Conversion of all alloc_fwnode() users to use physical addresses instead of virtual addresses so the virtual addresses are not leaked. The physical address is sufficient to identify the associated interrupt chip. - Add support for Marvel MMP3, Amlogic Meson SM1 interrupt chips. - Enforce interrupt threading at compile time if RT is enabled. - Small updates and improvements all over the place" * 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (37 commits) irqchip/gic-v3-its: Fix LPI release for Multi-MSI devices irqchip/uniphier-aidet: Use devm_platform_ioremap_resource() irqdomain: Add the missing assignment of domain->fwnode for named fwnode irqchip/mmp: Coexist with GIC root IRQ controller irqchip/mmp: Mask off interrupts from other cores irqchip/mmp: Add missing chained_irq_{enter,exit}() irqchip/mmp: Do not use of_address_to_resource() to get mux regs irqchip/meson-gpio: Add support for meson sm1 SoCs dt-bindings: interrupt-controller: New binding for the meson sm1 SoCs genirq/affinity: Remove const qualifier from node_to_cpumask argument genirq/affinity: Spread vectors on node according to nr_cpu ratio genirq/affinity: Improve __irq_build_affinity_masks() irqchip: Remove dev_err() usage after platform_get_irq() irqchip: Add include guard to irq-partition-percpu.h irqchip/mmp: Do not call irq_set_default_host() on DT platforms irqchip/gic-v3-its: Remove the redundant set_bit for lpi_map irqchip/gic-v3: Add quirks for HIP06/07 invalid GICD_TYPER erratum 161010803 irqchip/gic: Skip DT quirks when evaluating IIDR-based quirks irqchip/gic-v3: Warn about inconsistent implementations of extended ranges irqchip/gic-v3: Add EPPI range support ...
2019-09-17Merge branches 'acpi-misc' and 'acpi-doc'Rafael J. Wysocki
* acpi-misc: ACPI: thermal: Remove redundant acpi_has_method() calls ACPI: SBS: remove unused const variable 'SMBUS_PEC' * acpi-doc: Documentation: ACPI: DSD: Convert LED documentation to ReST
2019-09-17Merge branches 'pm-opp', 'pm-qos', 'acpi-pm', 'pm-domains' and 'pm-tools'Rafael J. Wysocki
* pm-opp: PM / OPP: Correct Documentation about library location opp: of: Support multiple suspend OPPs defined in DT dt-bindings: opp: Support multiple opp-suspend properties opp: core: add regulators enable and disable opp: Don't decrement uninitialized list_kref * pm-qos: PM: QoS: Get rid of unused flags * acpi-pm: ACPI: PM: Print debug messages on device power state changes * pm-domains: PM / Domains: Verify PM domain type in dev_pm_genpd_set_performance_state() PM / Domains: Simplify genpd_lookup_dev() PM / Domains: Align in-parameter names for some genpd functions * pm-tools: pm-graph: make setVal unbuffered again for python2 and python3 cpupower: update German translation tools/power/cpupower: fix 64bit detection when cross-compiling cpupower: Add missing newline at end of file pm-graph v5.5
2019-09-17Merge branch 'pm-cpufreq'Rafael J. Wysocki
* pm-cpufreq: (36 commits) cpufreq: Add qcs404 to cpufreq-dt-platdev blacklist cpufreq: qcom: Add support for qcs404 on nvmem driver cpufreq: qcom: Refactor the driver to make it easier to extend cpufreq: qcom: Re-organise kryo cpufreq to use it for other nvmem based qcom socs dt-bindings: opp: Add qcom-opp bindings with properties needed for CPR dt-bindings: opp: qcom-nvmem: Support pstates provided by a power domain Documentation: cpufreq: Update policy notifier documentation cpufreq: Remove CPUFREQ_ADJUST and CPUFREQ_NOTIFY policy notifier events sched/cpufreq: Align trace event behavior of fast switching ACPI: cpufreq: Switch to QoS requests instead of cpufreq notifier video: pxafb: Remove cpufreq policy notifier video: sa1100fb: Remove cpufreq policy notifier arch_topology: Use CPUFREQ_CREATE_POLICY instead of CPUFREQ_NOTIFY cpufreq: powerpc_cbe: Switch to QoS requests for freq limits cpufreq: powerpc: macintosh: Switch to QoS requests for freq limits cpufreq: Print driver name if cpufreq_suspend() fails cpufreq: mediatek: Add support for mt8183 cpufreq: mediatek: change to regulator_get_optional cpufreq: imx-cpufreq-dt: Add i.MX8MN support cpufreq: Use imx-cpufreq-dt for i.MX8MN's speed grading ...
2019-09-17Merge branch 'pm-cpuidle'Rafael J. Wysocki
* pm-cpuidle: cpuidle-haltpoll: Enable kvm guest polling when dedicated physical CPUs are available cpuidle-haltpoll: do not set an owner to allow modunload cpuidle-haltpoll: return -ENODEV on modinit failure cpuidle-haltpoll: set haltpoll as preferred governor cpuidle: allow governor switch on cpuidle_register_driver() powercap: idle_inject: Use higher resolution for idle injection cpuidle: play_idle: Increase the resolution to usec cpuidle-haltpoll: vcpu hotplug support cpuidle: teo: Get rid of redundant check in teo_update() cpuidle: teo: Allow tick to be stopped if PM QoS is used cpuidle: menu: Allow tick to be stopped if PM QoS is used cpuidle: header file stubs must be "static inline" cpuidle-haltpoll: disable host side polling when kvm virtualized cpuidle: add haltpoll governor governors: unify last_state_idx cpuidle: add poll_limit_ns to cpuidle_device structure add cpuidle-haltpoll driver
2019-09-17Merge branch 'pm-sleep'Rafael J. Wysocki
* pm-sleep: (29 commits) ACPI: PM: s2idle: Always set up EC GPE for system wakeup ACPI: PM: s2idle: Avoid rearming SCI for wakeup unnecessarily PM / wakeup: Unexport wakeup_source_sysfs_{add,remove}() PM / wakeup: Register wakeup class kobj after device is added PM / wakeup: Fix sysfs registration error path PM / wakeup: Show wakeup sources stats in sysfs PM / wakeup: Use wakeup_source_register() in wakelock.c PM / wakeup: Drop wakeup_source_init(), wakeup_source_prepare() PM: sleep: Replace strncmp() with str_has_prefix() PM: suspend: Fix platform_suspend_prepare_noirq() intel-hid: Disable button array during suspend-to-idle intel-hid: intel-vbtn: Avoid leaking wakeup_mode set ACPI: PM: s2idle: Execute LPS0 _DSM functions with suspended devices ACPI: EC: PM: Make acpi_ec_dispatch_gpe() print debug message ACPI: EC: PM: Consolidate some code depending on PM_SLEEP ACPI: PM: s2idle: Eliminate acpi_sleep_no_ec_events() ACPI: PM: s2idle: Switch EC over to polling during "noirq" suspend ACPI: PM: s2idle: Add acpi.sleep_no_lps0 module parameter ACPI: PM: s2idle: Rearrange lps0_device_attach() PM/sleep: Expose suspend stats in sysfs ...
2019-09-16Merge tag 'platform-drivers-x86-v5.4-1' of ↵Linus Torvalds
git://git.infradead.org/linux-platform-drivers-x86 Pull x86 platform-drivers updates from Andy Shevchenko: - ASUS WMI driver got a couple of updates, i.e. support of FAN is fixed for recent products and the charge threshold support has been added - Two uknown key events for Dell laptops are being ignored now to avoid spamming users with harmless messages - HP ZBook 17 G5 and ASUS Zenbook UX430UNR got accelerometer support. - Intel CherryTrail platforms had a regression with wake up. Now it's fixed - Intel PMC driver got fixed in order to work nicely in Xen environment - Intel Speed Select driver provides bucket vs core count relationship. Besides that the tools has been updated for better output - The PrivacyGuard is enabled on Lenovo ThinkPad laptops - Three tablets - Trekstor Primebook C11B 2-in-1, Irbis TW90 and Chuwi Surbook Mini - got touchscreen support * tag 'platform-drivers-x86-v5.4-1' of git://git.infradead.org/linux-platform-drivers-x86: (53 commits) MAINTAINERS: Switch PDx86 subsystem status to Odd Fixes platform/x86: asus-wmi: Refactor charge threshold to use the battery hooking API platform/x86: asus-wmi: Rename CHARGE_THRESHOLD to RSOC platform/x86: asus-wmi: Reorder ASUS_WMI_CHARGE_THRESHOLD tools/power/x86/intel-speed-select: Display core count for bucket platform/x86: ISST: Allow additional TRL MSRs tools/power/x86/intel-speed-select: Fix memory leak tools/power/x86/intel-speed-select: Output success/failed for command output tools/power/x86/intel-speed-select: Output human readable CPU list tools/power/x86/intel-speed-select: Change turbo ratio output to maximum turbo frequency tools/power/x86/intel-speed-select: Switch output to MHz tools/power/x86/intel-speed-select: Simplify output for turbo-freq and base-freq tools/power/x86/intel-speed-select: Fix cpu-count output tools/power/x86/intel-speed-select: Fix help option typo tools/power/x86/intel-speed-select: Fix package typo tools/power/x86/intel-speed-select: Fix a read overflow in isst_set_tdp_level_msr() platform/x86: intel_int0002_vgpio: Use device_init_wakeup platform/x86: intel_int0002_vgpio: Fix wakeups not working on Cherry Trail platform/x86: compal-laptop: Initialize "value" in ec_read_u8() platform/x86: touchscreen_dmi: Add info for the Trekstor Primebook C11B 2-in-1 ...
2019-09-16Merge branch 'sched-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler updates from Ingo Molnar: - MAINTAINERS: Add Mark Rutland as perf submaintainer, Juri Lelli and Vincent Guittot as scheduler submaintainers. Add Dietmar Eggemann, Steven Rostedt, Ben Segall and Mel Gorman as scheduler reviewers. As perf and the scheduler is getting bigger and more complex, document the status quo of current responsibilities and interests, and spread the review pain^H^H^H^H fun via an increase in the Cc: linecount generated by scripts/get_maintainer.pl. :-) - Add another series of patches that brings the -rt (PREEMPT_RT) tree closer to mainline: split the monolithic CONFIG_PREEMPT dependencies into a new CONFIG_PREEMPTION category that will allow the eventual introduction of CONFIG_PREEMPT_RT. Still a few more hundred patches to go though. - Extend the CPU cgroup controller with uclamp.min and uclamp.max to allow the finer shaping of CPU bandwidth usage. - Micro-optimize energy-aware wake-ups from O(CPUS^2) to O(CPUS). - Improve the behavior of high CPU count, high thread count applications running under cpu.cfs_quota_us constraints. - Improve balancing with SCHED_IDLE (SCHED_BATCH) tasks present. - Improve CPU isolation housekeeping CPU allocation NUMA locality. - Fix deadline scheduler bandwidth calculations and logic when cpusets rebuilds the topology, or when it gets deadline-throttled while it's being offlined. - Convert the cpuset_mutex to percpu_rwsem, to allow it to be used from setscheduler() system calls without creating global serialization. Add new synchronization between cpuset topology-changing events and the deadline acceptance tests in setscheduler(), which were broken before. - Rework the active_mm state machine to be less confusing and more optimal. - Rework (simplify) the pick_next_task() slowpath. - Improve load-balancing on AMD EPYC systems. - ... and misc cleanups, smaller fixes and improvements - please see the Git log for more details. * 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (53 commits) sched/psi: Correct overly pessimistic size calculation sched/fair: Speed-up energy-aware wake-ups sched/uclamp: Always use 'enum uclamp_id' for clamp_id values sched/uclamp: Update CPU's refcount on TG's clamp changes sched/uclamp: Use TG's clamps to restrict TASK's clamps sched/uclamp: Propagate system defaults to the root group sched/uclamp: Propagate parent clamps sched/uclamp: Extend CPU's cgroup controller sched/topology: Improve load balancing on AMD EPYC systems arch, ia64: Make NUMA select SMP sched, perf: MAINTAINERS update, add submaintainers and reviewers sched/fair: Use rq_lock/unlock in online_fair_sched_group cpufreq: schedutil: fix equation in comment sched: Rework pick_next_task() slow-path sched: Allow put_prev_task() to drop rq->lock sched/fair: Expose newidle_balance() sched: Add task_struct pointer to sched_class::set_curr_task sched: Rework CPU hotplug task selection sched/{rt,deadline}: Fix set_next_task vs pick_next_task sched: Fix kerneldoc comment for ia64_set_curr_task ...
2019-09-16Merge branch 'efi-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull EFI updates from Ingo Molnar: - refactor the EFI config table handling across architectures - add support for the Dell EMC OEM config table - include AER diagnostic output to CPER handling of fatal PCIe errors * 'efi-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: efi: cper: print AER info of PCIe fatal error efi: Export Runtime Configuration Interface table to sysfs efi: ia64: move SAL systab handling out of generic EFI code efi/x86: move UV_SYSTAB handling into arch/x86 efi: x86: move efi_is_table_address() into arch/x86
2019-09-16Merge branch 'core-rcu-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull RCU updates from Ingo Molnar: "This cycle's RCU changes were: - A few more RCU flavor consolidation cleanups. - Updates to RCU's list-traversal macros improving lockdep usability. - Forward-progress improvements for no-CBs CPUs: Avoid ignoring incoming callbacks during grace-period waits. - Forward-progress improvements for no-CBs CPUs: Use ->cblist structure to take advantage of others' grace periods. - Also added a small commit that avoids needlessly inflicting scheduler-clock ticks on callback-offloaded CPUs. - Forward-progress improvements for no-CBs CPUs: Reduce contention on ->nocb_lock guarding ->cblist. - Forward-progress improvements for no-CBs CPUs: Add ->nocb_bypass list to further reduce contention on ->nocb_lock guarding ->cblist. - Miscellaneous fixes. - Torture-test updates. - minor LKMM updates" * 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (86 commits) MAINTAINERS: Update from paulmck@linux.ibm.com to paulmck@kernel.org rcu: Don't include <linux/ktime.h> in rcutiny.h rcu: Allow rcu_do_batch() to dynamically adjust batch sizes rcu/nocb: Don't wake no-CBs GP kthread if timer posted under overload rcu/nocb: Reduce __call_rcu_nocb_wake() leaf rcu_node ->lock contention rcu/nocb: Reduce nocb_cb_wait() leaf rcu_node ->lock contention rcu/nocb: Advance CBs after merge in rcutree_migrate_callbacks() rcu/nocb: Avoid synchronous wakeup in __call_rcu_nocb_wake() rcu/nocb: Print no-CBs diagnostics when rcutorture writer unduly delayed rcu/nocb: EXP Check use and usefulness of ->nocb_lock_contended rcu/nocb: Add bypass callback queueing rcu/nocb: Atomic ->len field in rcu_segcblist structure rcu/nocb: Unconditionally advance and wake for excessive CBs rcu/nocb: Reduce ->nocb_lock contention with separate ->nocb_gp_lock rcu/nocb: Reduce contention at no-CBs invocation-done time rcu/nocb: Reduce contention at no-CBs registry-time CB advancement rcu/nocb: Round down for number of no-CBs grace-period kthreads rcu/nocb: Avoid ->nocb_lock capture by corresponding CPU rcu/nocb: Avoid needless wakeups of no-CBs grace-period kthread rcu/nocb: Make __call_rcu_nocb_wake() safe for many callbacks ...
2019-09-16Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds
Pull ARM DT updates from Arnd Bergmann: "This is another huge branch with close to 450 changessets related to devicetree files, roughly half of this for 32-bit and 64-bit respectively. There are lots of cleanups and additional hardware support for platforms we already support based on SoCs from Renesas, ST-Microelectronics, Intel/Altera, Rockchips, Allwinner, Broadcom and other manufacturers. A total of 6 new SoCs and 37 new boards gets added this time, one more SoC will come in a follow-up branch. Most of the new boards are for 64-bit ARM SoCs, the others are typically for the 32-bit Cortex-A7. Going more into details for SoC platforms with new hardware support: - The Snapdragon 855 (SM8150) is Qualcomm's current high-end phone platform, usually paired with an external 5G modem. So far we only support the Qualcomm SM8150 MTP reference platform, but no actual products. - For the slightly older Qualcomm platforms, support for several interesting products is getting added: Three laptops based on Snapdragon 835/MSM8998 (Asus NovaGo, HP Envy X2 and Lenovo Miix 630), one laptop based on Snapdragon 850/sdm850 (Lenovo Yoga C630) and several phones based on the older Snapdragon 410/MSM8916 (Samsung A3 and A5, Longcheer L8150 aka Android One 2nd gen "seed" aka Wileyfox Swift). - Mediatek MT7629 is a new wireless network router chip, similar to the older MT7623. It gets added together with the reference board implementation. - Allwinner V3 is a repackaged version of the existing low-end V3s chip, and is used in the tiny Lichee Pi Zero plus, also added here. There is also a new TV set-top box based on Allwinner H6, the Tanix TX6, and the eMMC variant of the Olimex A64-Olinuxino development board. - NXP i.MX8M Nano is a new member of the ever-expanding i.MX SoC family, similar to the i.MX8M Mini. As usual, there is a large number of new boards for i.MX SoCs: Einfochips i.MX8QXP AI_ML, SolidRun Hummingboard Pulse baseboard and System-on-Module, Boundary Devices i.MX8MQ Nitrogen8M, and TechNexion PICO-PI-IMX8M-DEV for the 64-bit i.MX8 line. For 32-bit, we get the Kontron i.MX6UL N6310 SoM with two baseboards, the PHYTEC phyBOARD-Segin SoM with three baseboards, and the Zodiac Inflight Innovations i.MX7 RMU2 board. - In a different NXP product line, the Layerscape LS1046A "Freeway" reference board gets added. - Amlogic SM1 (S905X3) and G12B (S922X, A311D) are updated chips from their set-top-box line and smart speaker with newer CPU and GPU cores compared to their predecessors. Both are now also supported by the Khadas VIM3 development board series, and the dts files for that get reorganized a bit to better deal with all variants. Another board based on SM1 that gets added is the SEI Robotics SEI610. - There are a handful of new x86 and Power9 server boards using Aspeed BMC chips that are gaining support for running Linux on the BMC through the OpenBMC project: Facebook Minipack/Wedge100/Wedge40, Lenovo Hr855xg2, and Mihawk. Notably these are still new machines using SoCs based on the ARM9 and ARM11 CPU cores, as support for the new Cortex-A7 based AST2600 is still ramping up. - There are three new end-user products using 32-bit Rockchips SoCs: Mecer Xtreme Mini S6 is an Android "mini PC" box based on the low-end RK3229 chip, while the two AOpen products Chromebox Mini (Fievel) and Chromebase Mini (Tiger) run ChromeOS and are meant for commercial settings(digital signage, PoS, ...). - One more single-board computer based on the popular 64-bit RK3399 is added: the Leez RK3399 P710" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (467 commits) arm64: dts: qcom: Add Lenovo Yoga C630 ARM: dts: aspeed-g5: Fixe gpio-ranges upper limit ARM; dts: aspeed: mihawk: File should not be executable ARM: dts: aspeed: swift: Change power supplies to version 2 ARM: dts: aspeed: vesnin: Add secondary SPI flash chip ARM: dts: aspeed: vesnin: Add wdt2 with alt-boot option ARM: dts: aspeed-g4: Add all flash chips ARM: dts: exynos: Enable GPU/Mali T604 on Arndale board ARM: dts: exynos: Enable GPU/Mali T604 on Chromebook Snow ARM: dts: exynos: Add GPU/Mali T604 node to Exynos5250 ARM: dts: exynos: Fix min/max buck4 for GPU on Arndale board ARM: dts: exynos: Mark LDO10 as always-on on Peach Pit/Pi Chromebooks ARM: dts: exynos: Remove not accurate secondary ADC compatible arm64: dts: rockchip: limit clock rate of MMC controllers for RK3328 arm64: dts: meson-sm1-sei610: add stdout-path property back arm64: dts: meson-sm1-sei610: enable DVFS arm64: dts: khadas-vim3: add support for the SM1 based VIM3L dt-bindings: arm: amlogic: add Amlogic SM1 based Khadas VIM3L bindings arm64: dts: khadas-vim3: move common nodes into meson-khadas-vim3.dtsi arm64: dts: meson: g12a: add reset to tdm formatters ...
2019-09-16Merge tag 'armsoc-drivers' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC driver updates from Arnd Bergmann: "This contains driver changes that are tightly connected to SoC specific code. Aside from smaller cleanups and bug fixes, here is a list of the notable changes. New device drivers: - The Turris Mox router has a new "moxtet" bus driver for its on-board pluggable extension bus. The same platform also gains a firmware driver. - The Samsung Exynos family gains a new Chipid driver exporting using the soc device sysfs interface - A similar socinfo driver for Qualcomm Snapdragon chips. - A firmware driver for the NXP i.MX DSP IPC protocol using shared memory and a mailbox Other changes: - The i.MX reset controller driver now supports the NXP i.MX8MM chip - Amlogic SoC specific drivers gain support for the S905X3 and A311D chips - A rework of the TI Davinci framebuffer driver to allow important cleanups in the platform code - A couple of device drivers for removed ARM SoC platforms are removed. Most of the removals were picked up by other maintainers, this contains whatever was left" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (123 commits) bus: uniphier-system-bus: use devm_platform_ioremap_resource() soc: ti: ti_sci_pm_domains: Add support for exclusive and shared access dt-bindings: ti_sci_pm_domains: Add support for exclusive and shared access firmware: ti_sci: Allow for device shared and exclusive requests bus: imx-weim: remove incorrect __init annotations fbdev: remove w90x900/nuc900 platform drivers spi: remove w90x900 driver net: remove w90p910-ether driver net: remove ks8695 driver firmware: turris-mox-rwtm: Add sysfs documentation firmware: Add Turris Mox rWTM firmware driver dt-bindings: firmware: Document cznic,turris-mox-rwtm binding bus: moxtet: fix unsigned comparison to less than zero bus: moxtet: remove set but not used variable 'dummy' ARM: scoop: Use the right include dt-bindings: power: add Amlogic Everything-Else power domains bindings soc: amlogic: Add support for Everything-Else power domains controller fbdev: da8xx: use resource management for dma fbdev: da8xx-fb: drop a redundant if fbdev: da8xx-fb: use devm_platform_ioremap_resource() ...
2019-09-16Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds
Pull ARM SoC platform updates from Arnd Bergmann: "The main change this time around is a cleanup of some of the oldest platforms based on the XScale and ARM9 CPU cores, which are between 10 and 20 years old. The Kendin/Micrel/Microchip KS8695, Winbond/Nuvoton W90x900 and Intel IOP33x/IOP13xx platforms are removed after we determined that nobody is using them any more. The TI Davinci and NXP LPC32xx platforms on the other hand are still in active use and are converted to the ARCH_MULTIPLATFORM build, meaning that we can compile a kernel that works on these along with most other ARMv5 platforms. Changes toward that goal are also merged for IOP32x, but additional work is needed to complete this. Patches for the remaining ARMv5 platforms have started but need more work and some testing. Support for the new ASpeed AST2600 gets added, this is based on the Cortex-A7 ARMv7 core, and is a newer version of the existing ARMv5 and ARMv6 chips in the same family. Other changes include a cleanup of the ST-Ericsson ux500 platform and the move of the TI Davinci platform to a new clocksource driver" [ The changes had marked INTEL_IOP_ADMA and USB_LPC32XX as being buildable on other platforms through COMPILE_TEST, but that causes new warnings that I most definitely do not want to see during the merge window as that could hide other issues. So the COMPILE_TEST option got disabled for them again - Linus ] * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (61 commits) ARM: multi_v5_defconfig: make DaVinci part of the ARM v5 multiplatform build ARM: davinci: support multiplatform build for ARM v5 arm64: exynos: Enable exynos-chipid driver ARM: OMAP2+: Delete an unnecessary kfree() call in omap_hsmmc_pdata_init() ARM: OMAP2+: move platform-specific asm-offset.h to arch/arm/mach-omap2 ARM: davinci: dm646x: Fix a typo in the comment ARM: davinci: dm646x: switch to using the clocksource driver ARM: davinci: dm644x: switch to using the clocksource driver ARM: aspeed: Enable SMP boot ARM: aspeed: Add ASPEED AST2600 architecture ARM: aspeed: Select timer in each SoC dt-bindings: arm: cpus: Add ASPEED SMP ARM: imx: stop adjusting ar8031 phy tx delay mailmap: map old company name to new one @microchip.com MAINTAINERS: at91: remove the TC entry MAINTAINERS: at91: Collect all pinctrl/gpio drivers in same entry ARM: at91: move platform-specific asm-offset.h to arch/arm/mach-at91 MAINTAINERS: Extend patterns for Samsung SoC, Security Subsystem and clock drivers ARM: s3c64xx: squash samsung_usb_phy.h into setup-usb-phy.c ARM: debug-ll: Add support for r7s9210 ...
2019-09-16Merge branch 'parisc-5.4-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull parisc updates from Helge Deller: - Make the powerpc implementation to read elf files available as a public kexec interface so it can be re-used on other architectures (Sven) - Implement kexec on parisc (Sven) - Add kprobes on ftrace on parisc (Sven) - Fix kernel crash with HSC-PCI cards based on card-mode Dino - Add assembly implementations for memset, strlen, strcpy, strncpy and strcat - Some cleanups, documentation updates, warning fixes, ... * 'parisc-5.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: (25 commits) parisc: Have git ignore generated real2.S and firmware.c parisc: Disable HP HSC-PCI Cards to prevent kernel crash parisc: add support for kexec_file_load() syscall parisc: wire up kexec_file_load syscall parisc: add kexec syscall support parisc: add __pdc_cpu_rendezvous() kprobes/parisc: remove arch_kprobe_on_func_entry() kexec_elf: support 32 bit ELF files kexec_elf: remove unused variable in kexec_elf_load() kexec_elf: remove Elf_Rel macro kexec_elf: remove PURGATORY_STACK_SIZE kexec_elf: remove parsing of section headers kexec_elf: change order of elf_*_to_cpu() functions kexec: add KEXEC_ELF parisc: Save some bytes in dino driver parisc: Drop comments which are already in pci.h parisc: Convert eisa_enumerator to use pr_cont() parisc: Avoid warning when loading hppb driver parisc: speed up flush_tlb_all_local with qemu parisc: Add ALTERNATIVE_CODE() and ALT_COND_RUN_ON_QEMU ...
2019-09-16Merge tag 'please-pull-ia64_for_5.4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux Pull ia64 updates from Tony Luck: "The big change here is removal of support for SGI Altix" * tag 'please-pull-ia64_for_5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux: (33 commits) genirq: remove the is_affinity_mask_valid hook ia64: remove CONFIG_SWIOTLB ifdefs ia64: remove support for machvecs ia64: move the screen_info setup to common code ia64: move the ROOT_DEV setup to common code ia64: rework iommu probing ia64: remove the unused sn_coherency_id symbol ia64: remove the SGI UV simulator support ia64: remove the zx1 swiotlb machvec ia64: remove CONFIG_ACPI ifdefs ia64: remove CONFIG_PCI ifdefs ia64: remove the hpsim platform ia64: remove now unused machvec indirections ia64: remove support for the SGI SN2 platform drivers: remove the SGI SN2 IOC4 base support drivers: remove the SGI SN2 IOC3 base support qla2xxx: remove SGI SN2 support qla1280: remove SGI SN2 support misc/sgi-xp: remove SGI SN2 support char/mspec: remove SGI SN2 support ...
2019-09-16Merge tag 'arm64-upstream' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 updates from Will Deacon: "Although there isn't tonnes of code in terms of line count, there are a fair few headline features which I've noted both in the tag and also in the merge commits when I pulled everything together. The part I'm most pleased with is that we had 35 contributors this time around, which feels like a big jump from the usual small group of core arm64 arch developers. Hopefully they all enjoyed it so much that they'll continue to contribute, but we'll see. It's probably worth highlighting that we've pulled in a branch from the risc-v folks which moves our CPU topology code out to where it can be shared with others. Summary: - 52-bit virtual addressing in the kernel - New ABI to allow tagged user pointers to be dereferenced by syscalls - Early RNG seeding by the bootloader - Improve robustness of SMP boot - Fix TLB invalidation in light of recent architectural clarifications - Support for i.MX8 DDR PMU - Remove direct LSE instruction patching in favour of static keys - Function error injection using kprobes - Support for the PPTT "thread" flag introduced by ACPI 6.3 - Move PSCI idle code into proper cpuidle driver - Relaxation of implicit I/O memory barriers - Build with RELR relocations when toolchain supports them - Numerous cleanups and non-critical fixes" * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (114 commits) arm64: remove __iounmap arm64: atomics: Use K constraint when toolchain appears to support it arm64: atomics: Undefine internal macros after use arm64: lse: Make ARM64_LSE_ATOMICS depend on JUMP_LABEL arm64: asm: Kill 'asm/atomic_arch.h' arm64: lse: Remove unused 'alt_lse' assembly macro arm64: atomics: Remove atomic_ll_sc compilation unit arm64: avoid using hard-coded registers for LSE atomics arm64: atomics: avoid out-of-line ll/sc atomics arm64: Use correct ll/sc atomic constraints jump_label: Don't warn on __exit jump entries docs/perf: Add documentation for the i.MX8 DDR PMU perf/imx_ddr: Add support for AXI ID filtering arm64: kpti: ensure patched kernel text is fetched from PoU arm64: fix fixmap copy for 16K pages and 48-bit VA perf/smmuv3: Validate groups for global filtering perf/smmuv3: Validate group size arm64: Relax Documentation/arm64/tagged-pointers.rst arm64: kvm: Replace hardcoded '1' with SYS_PAR_EL1_F arm64: mm: Ignore spurious translation faults taken from the kernel ...
2019-09-16Merge tag 'iommu-updates-v5.4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull iommu updates from Joerg Roedel: - batched unmap support for the IOMMU-API - support for unlocked command queueing in the ARM-SMMU driver - rework the ATS support in the ARM-SMMU driver - more refactoring in the ARM-SMMU driver to support hardware implemention specific quirks and errata - bounce buffering DMA-API implementatation in the Intel VT-d driver for untrusted devices (like Thunderbolt devices) - fixes for runtime PM support in the OMAP iommu driver - MT8183 IOMMU support in the Mediatek IOMMU driver - rework of the way the IOMMU core sets the default domain type for groups. Changing the default domain type on x86 does not require two kernel parameters anymore. - more smaller fixes and cleanups * tag 'iommu-updates-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (113 commits) iommu/vt-d: Declare Broadwell igfx dmar support snafu iommu/vt-d: Add Scalable Mode fault information iommu/vt-d: Use bounce buffer for untrusted devices iommu/vt-d: Add trace events for device dma map/unmap iommu/vt-d: Don't switch off swiotlb if bounce page is used iommu/vt-d: Check whether device requires bounce buffer swiotlb: Split size parameter to map/unmap APIs iommu/omap: Mark pm functions __maybe_unused iommu/ipmmu-vmsa: Disable cache snoop transactions on R-Car Gen3 iommu/ipmmu-vmsa: Move IMTTBCR_SL0_TWOBIT_* to restore sort order iommu: Don't use sme_active() in generic code iommu/arm-smmu-v3: Fix build error without CONFIG_PCI_ATS iommu/qcom: Use struct_size() helper iommu: Remove wrong default domain comments iommu/dma: Fix for dereferencing before null checking iommu/mediatek: Clean up struct mtk_smi_iommu memory: mtk-smi: Get rid of need_larbid iommu/mediatek: Fix VLD_PA_RNG register backup when suspend memory: mtk-smi: Add bus_sel for mt8183 memory: mtk-smi: Invoke pm runtime_callback to enable clocks ...
2019-09-16Merge tag 'gpio-v5.4-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO updates from Linus Walleij: "This is the bulk of changes in the GPIO subsystem for the v5.4 kernel cycle. Core changes: - Support hierarchical GPIO irqchips. We now have three consumers that can use this: Intel IXP4xx, ThunderX and Qualcomm SPMI GPIO (in the pinctrl subsystem). The support code has been long in the making and hashed out so it should be easily adaptable for all hierarchical irqchip parents. The code only gets compiled in if hierarchical irqchip is used at the topmost irq controller at least, as the hierarchical irqchip requires strict hierarchy all the way up in the system. - Determine the need for a "valid_mask" for GPIO lines on the gpio_chip and conversely for the "valid_mask" for the GPIO interrupt chip interrupt lines by looking for a .init_valid_mask() callback in the main chip or GPIO interrupt chip respectively. Allocate it with bitmap_alloc(). - Isolate the device tree/open firmware GPIO description code out in its own file properly. - Isolate the ACPI GPIO description code out in its own file properly. - Drop a whole lot of #ifdef:s in the main includes: it does not hurt to keep the include items around, and we get quicker and clearer compile failures if the appropriate kernel symbols are not selected for drivers. New/deleted drivers: - New driver for Aspeed SGPIO. - The KS8695 driver is deleted as the platform gets deleted from arch/arm in this kernel cycle. - The Cirrus Logic Madera driver now supports CS47L92 and CS47L15. - The Freescale MPC8xxx now supports LS1028A and LS1088A. Driver improvements: - We pass the GPIO irqchip intialization by directly filling in the struct instead of using set-up functions (the new way) for Intel MID, Lynxpoint, Merrifield, XLP, HLWD, Aspeed, ZX, VF610, TQMX86, MT7621, Zynq and EP93xx. Out-of-band changes: - Fix a GPIO header inclusion in Unicore - no response from maintainer. - Drop FMC subsystem from MAINTAINERS - was deleted in the GPIO tree last cycle so let's mop up the shards" * tag 'gpio-v5.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (82 commits) gpiolib: of: add a fallback for wlf,reset GPIO name gpio: htc-egpio: Remove unused exported htc_egpio_get_wakeup_irq() gpio: remove explicit comparison with 0 gpio: creg-snps: use devm_platform_ioremap_resource() to simplify code gpio: devres: Switch to EXPORT_SYMBOL_GPL() gpio: of: Switch to EXPORT_SYMBOL_GPL() gpio: of: Make of_gpio_simple_xlate() private gpio: of: Make of_get_named_gpiod_flags() private gpio: aspeed: Add in ast2600 details to Aspeed driver gpio: aspeed: Use ngpio property from device tree if available gpio: aspeed: Setup irqchip dynamically gpio/aspeed: Fix incorrect number of banks gpio: aspeed: Update documentation with ast2600 controllers gpio: Initialize the irqchip valid_mask with a callback gpiolib: acpi: make acpi_can_fallback_to_crs() static gpio: Fix further merge errors gpio: Fix up merge collision in include file gpio: of: Normalize return code variable name gpio: gpiolib: Normalize return code variable name gpio: ep93xx: Pass irqchip when adding gpiochip ...
2019-09-16Merge tag 'spi-v5.4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi updates from Mark Brown: "The big theme for this release has been performance, we've had a series of unrelated overhauls of a few drivers all with a big peformance component. Otherwise it's been relatively quiet, highlights include: - A big overhaul of the spi-fsl-dspi driver improving the code quality, performance and stability from Vladimir Oltean. - A big performance enhancement for the bc2835 (Raspberry Pi) driver for unidirectional transfers from Lukas Wunner. - Improved performance on small transfers for the uniphier driver from Keiji Hayashibara. - Lots of coccinelle generated cleanups from Yue Haibing. - New device support for Freescale ls2080a and Nuvoton NPCM FIU" * tag 'spi-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (102 commits) spi: mediatek: support large PA spi: mediatek: add spi support for mt6765 IC dt-bindings: spi: update bindings for MT6765 SoC spi: bcm2835: Speed up RX-only DMA transfers by zero-filling TX FIFO spi: bcm2835: Speed up TX-only DMA transfers by clearing RX FIFO dmaengine: bcm2835: Avoid accessing memory when copying zeroes spi: bcm2835: Cache CS register value for ->prepare_message() dmaengine: bcm2835: Document struct bcm2835_dmadev spi: Guarantee cacheline alignment of driver-private data dmaengine: bcm2835: Allow reusable descriptors dmaengine: bcm2835: Allow cyclic transactions without interrupt spi: bcm2835: Drop dma_pending flag spi: bcm2835: Work around DONE bit erratum spi-gpio: Use PTR_ERR_OR_ZERO() in spi_gpio_request() spi: Use an abbreviated pointer to ctlr->cur_msg in __spi_pump_messages spi: npcm-fiu: remove set but not used variable 'retlen' spi: fsl-spi: use devm_platform_ioremap_resource() to simplify code spi: zynq-qspi: use devm_platform_ioremap_resource() to simplify code spi: zynqmp: use devm_platform_ioremap_resource() to simplify code spi: xlp: use devm_platform_ioremap_resource() to simplify code ...
2019-09-16Merge tag 'regulator-v5.4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Pull regulator updates from Mark Brown: "A small update for the regualtor API for this cycle, some small fixes and a bunch of new devices but none of them very big. The most stand out thing is the regulator-fixed-clock driver which is for regulators where the enable control is done by using a clock instead of a GPIO or register write, a novel hardware design that had not previously come up. Summary: - Added a keyword pattern for regulator_get_optional() since usage of that API generally needs extra review. - Operating mode and suspend state support for act8865. - New device support for Active Semiconductor ACT8600 chargers, Mediatek MT6358, Qualcomm SM8150, regulator-fixed-clock, and Synoptics SY20276, SY20278 and SY8824E" * tag 'regulator-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (52 commits) regulator: core: Fix error return for /sys access regulator: da9211: fix obtaining "enable" GPIO regulator: max77686: fix obtaining "maxim,ena" GPIO regulator: uniphier: Add Pro5 USB3 VBUS support dt-bindings: regulator: add regulator-fixed-clock binding regulator: fixed: add possibility to enable by clock regulator: s2mps11: Consistently use local variable regulator: lp87565: Simplify lp87565_buck_set_ramp_delay regulator: slg51000: use devm_gpiod_get_optional() in probe regulator: lp8788-ldo: make array en_mask static const, makes object smaller regulator: tps65132: Stop parsing DT when gpio is not found regulator: Defer init completion for a while after late_initcall regulator: add missing 'static inline' to a helper's stub regulator: provide regulator_bulk_set_supply_names() MAINTAINERS: Add keyword pattern on regulator_get_optional() regulator: sy8824x: add prefixes to BUCK_EN and MODE macros regulator: sy8824x: use c++style for the comment block near SPDX regulator: mt6358: Add BROKEN dependency while waiting for MFD to merge regulator: mt6358: Add support for MT6358 regulator regulator: Add document for MT6358 regulator ...
2019-09-16Merge tag 'hwmon-for-v5.4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon updates from Guenter Roeck: "New drivers: - Inspur Power System power supply driver - Synaptics AS370 PVT sensor driver Chip support: - support SHTC3 in shtc1 driver - support NCT6116 in nct6775 driver - support AMD family 17h, model 70h CPUs in k10temp driver - support PCT2075 in lm75 driver Removed drivers: - ads1015 driver (now supported in iio) Other changes: - Convert drivers to use devm_i2c_new_dummy_device - Substantial structural improvements in lm75 driver adding support for writing sample interval for supported chips - Add support for PSU version 2 to ibm-cffps driver - Add support for power attribute to iio_hwmon bridge - Add support for additional fan, voltage and temperature attributes to nct7904 driver - Convert adt7475 driver to use hwmon_device_register_with_groups() - Convert k8temp driver to use hwmon_device_register_with_info() - Various other improvements and minor fixes" * tag 'hwmon-for-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (48 commits) hwmon: submitting-patches: Add note on comment style hwmon: submitting-patches: Point to with_info API hwmon: (nct7904) Fix incorrect SMI status register setting of LTD temperature and fan. hwmon: (shtc1) add support for the SHTC3 sensor hwmon: (shtc1) fix shtc1 and shtw1 id mask hwmon: (lm75) Aproximate sample times to data-sheet values hwmon: (w83793d) convert to use devm_i2c_new_dummy_device hwmon: (w83792d) convert to use devm_i2c_new_dummy_device hwmon: (w83791d) convert to use devm_i2c_new_dummy_device hwmon: (as370-hwmon) fix devm_platform_ioremap_resource.cocci warnings hwmon: (lm75) Add support for writing sampling period on PCT2075 hwmon: (lm75) Add support for writing conversion time for TMP112 hwmon: (lm75) Move updating the sample interval to its own function hwmon: (lm75) Support configuring the sample time for various chips hwmon: (nct7904) Fix incorrect temperature limitation register setting of LTD. hwmon: (as370-hwmon) Add DT bindings for Synaptics AS370 PVT hwmon: Add Synaptics AS370 PVT sensor driver pmbus: (ibm-cffps) Add support for version 2 of the PSU dt-bindings: hwmon: Document ibm,cffps2 compatible string hwmon: (iio_hwmon) Enable power exporting from IIO ...
2019-09-16Merge tag 'tpmdd-next-20190902' of git://git.infradead.org/users/jjs/linux-tpmddLinus Torvalds
Pull tpm updates from Jarkko Sakkinen: "A new driver for fTPM living inside ARM TEE was added this round. In addition to that, there are three bug fixes and one clean up" * tag 'tpmdd-next-20190902' of git://git.infradead.org/users/jjs/linux-tpmdd: tpm/tpm_ftpm_tee: Document fTPM TEE driver tpm/tpm_ftpm_tee: A driver for firmware TPM running inside TEE tpm: Remove a deprecated comments about implicit sysfs locking tpm_tis_core: Set TPM_CHIP_FLAG_IRQ before probing for interrupts tpm_tis_core: Turn on the TPM before probing IRQ's MAINTAINERS: fix style in KEYS-TRUSTED entry