| Age | Commit message (Collapse) | Author |
|---|
|
Add DT bindings for Texas Instruments Simplelink CC1352P7 wireless MCU
BeaglePlay has CC1352P7 co-processor connected to the main AM62 (running
Linux) over UART. In the BeagleConnect Technology, CC1352 is responsible
for handling 6LoWPAN communication with beagleconnect freedom nodes as
well as their discovery.
Signed-off-by: Ayush Singh <ayushdevel1325@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20231017101116.178041-2-ayushdevel1325@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This binding supported NVMEM cells as subnodes and that syntax is used
by few in-kenel DTS files. Modify binding to allow it.
Reported-by: Rob Herring <robh@kernel.org>
Fixes: c5330723d5a0 ("dt-bindings: nvmem: move deprecated cells binding to its own file")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20231024171253.19976-2-zajec5@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This binding supported NVMEM cells as subnodes and that syntax is used
by few in-kenel DTS files. Modify binding to allow it.
Reported-by: Rob Herring <robh@kernel.org>
Fixes: c5330723d5a0 ("dt-bindings: nvmem: move deprecated cells binding to its own file")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20231024171253.19976-1-zajec5@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/extcon into char-misc-next
Chanwoo writes:
Update extcon next for v6.7
Detailed description for this pull request:
- Add new Realtek DHC(Digital Home Hub) RTD SoC external connector driver
: Detect USB Type C cable detection for USB and USB_HOST cable
and support USB Type-C connector class. The extcon-rtk-type-c.c driver
supports the following Realtek RTD SoC:
- realtek,rtd1295-type-c
- realtek,rtd1312c-type-c
- realtek,rtd1315e-type-c
- realtek,rtd1319-type-c
- realtek,rtd1319d-type-c
- realtek,rtd1395-type-c
- realtek,rtd1619-type-c
- realtek,rtd1619b-type-c
- Add device-tree compatible string for extcon-max77693 and extcon-77843.c.
* tag 'extcon-next-for-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/extcon:
extcon: realtek: add the error handler for nvmem_cell_read
extcon: max77843: add device-tree compatible string
extcon: max77693: add device-tree compatible string
dt-bindings: usb: Add Realtek DHC RTD SoC Type-C
extcon: add Realtek DHC RTD SoC Type-C driver
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc into char-misc-next
Georgi writes:
interconnect changes for 6.7
This pull request contains the interconnect changes for the 6.7-rc1 merge
window which contains just driver changes with the following highlights:
Driver changes:
- New interconnect driver for the SDX75 platform.
- Support for coefficients to allow node-specific rate adjustments.
- Update DT bindings according to the recent changes of how we
represent the SMD and RPM bus clocks on Qualcomm platforms.
- Misc fixes and cleanups.
Signed-off-by: Georgi Djakov <djakov@kernel.org>
* tag 'icc-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc: (36 commits)
interconnect: qcom: Convert to platform remove callback returning void
dt-bindings: interconnect: qcom,rpmh: do not require reg on SDX65 MC virt
interconnect: imx: Replace inclusion of kernel.h in the header
interconnect: fix error handling in qnoc_probe()
interconnect: qcom: osm-l3: Replace custom implementation of COUNT_ARGS()
interconnect: msm8974: Replace custom implementation of COUNT_ARGS()
interconnect: imx: Replace custom implementation of COUNT_ARGS()
interconnect: qcom: Add SDX75 interconnect provider driver
dt-bindings: interconnect: Add compatibles for SDX75
interconnect: qcom: sm8350: Set ACV enable_mask
interconnect: qcom: sm8250: Set ACV enable_mask
interconnect: qcom: sm8150: Set ACV enable_mask
interconnect: qcom: sm6350: Set ACV enable_mask
interconnect: qcom: sdm845: Set ACV enable_mask
interconnect: qcom: sdm670: Set ACV enable_mask
interconnect: qcom: sc8280xp: Set ACV enable_mask
interconnect: qcom: sc8180x: Set ACV enable_mask
interconnect: qcom: sc7280: Set ACV enable_mask
interconnect: qcom: sc7180: Set ACV enable_mask
interconnect: qcom: qdu1000: Set ACV enable_mask
...
|
|
node schemas
Just as unevaluatedProperties or additionalProperties are required at
the top level of schemas, they should (and will) also be required for
child node schemas. That ensures only documented properties are
present for any node.
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20231020105545.216052-6-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Support for old NVMEM fixed cells was deprecated in favour of
"fixed-layout". It's still part of the nvmem.yaml though and may be
unknowingly used by new bindings added without much of analyze.
To make it more difficult to accidentally support old syntax move its
binding to separated file with "deprecated" in its name.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20231020105545.216052-4-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next
Jonathan writes:
IIO: 1st set of new device support, features and cleanup for 6.7
Particularly great to see a resolver driver move out of staging via a
massive set of changes. Only took 13 years :)
One small patch added then reverted due to a report of test breakage
(ashai-kasei,ak8975: Drop deprecated enums.)
An immutable branch was used for some hid-senors changes in case
there was a need to take them into the HID tree as well.
New device support
-----------------
adi,hmc425a
- Add support for HMC540SLP3E broadband 4-bit digital attenuator.
kionix,kx022a
- Add support for the kx132-1211 accelerometer. Require significant
driver rework to enable this including add a chip type specific
structure to deal with the chip differences.
- Add support for the kx132acr-lbz accelerometer (subset of the kx022a
feature set).
lltc,ltc2309
- New driver for this 8 channel ADC.
microchip,mcp3911
- Add support for rest of mcp391x family of ADCs (there are various
differences beyond simple channel count variation.
Series includes some general driver cleanup.
microchip,mcp3564
- New driver for MCP3461, MCP3462, MCP3464, MCP3541, MCP3562, MCP3564
and their R variants of 16/24bit ADCs. A few minor fixed followed.
rohm,bu1390
- New driver for this pressure sensor.
Staging graduation
------------------
adi,ad1210 (after 13 or so years :)
- More or less a complete (step-wise) rewrite of this resolver driver
to bring it up to date with modern IIO standards. The fault signal
handling mapping to event channels was particularly complex and
significant part of the changes.
Features
--------
iio-core
- Add chromacity and color temperature channel types.
adi,ad7192
- Oversampling ratio control (called fast settling in datasheet).
adi,adis16475
- Add core support and then driver support for delta angle and delta
velocity channels. These are intended for summation to establish
angle and velocity changes over larger timescales. Fix was
needed for alignment after the temperature channel. Further fix
reduced set of devices for which the buffer support was applicable
as seems burst reads don't cover these on all devices.
hid-sensors-als
- Chromacity and color temperatures support including in amd sfh.
stx104
- Add support for counter subsystem to this multipurpose device.
ti,twl6030
- Add missing device tree binding description.
Clean up and minor fixes.
------------------------
treewide
- Drop some unused declarations across IIO.
- Make more use of device_get_match_data() instead of OF specific
approaches.
Similar cleanup to sets of drivers.
- Stop platform remove callbacks returning anything by using the
temporary remove_new() callback.
- Use i2c_get_match_data() to cope nicely with all types of ID table
entry.
- Use device_get_match_data() for various platform device to cope
with more types of firmware.
- Convert from enum to pointer in ID tables allowing use of
i2c_get_match_data().
- Fix sorting on some ID tables.
- Include specific string helper headers rather than simply string_helpers.h
docs
- Better description of the ordering requirements etc for
available_scan_masks.
tools
- Handle alignment of mixed sizes where the last element isn't the biggest
correctly. Seems that doesn't happen often!
adi,ad2s1210
- Lots of work from David Lechner on this driver including a few fixes
that are going with the rework to avoid slowing that down.
adi,ad4310
- Replace deprecated devm_clk_register()
adi,ad74413r
- Bring the channel function setting inline with the datasheet.
adi,ad7192
- Change to FIELD_PREP(), FIELD_GET().
- Calculate f_order from the sinc filter and chop filter states.
- Move more per chip config into data in struct ad7192_chip_info
- Cleanup unused parameter in channel macros.
adi,adf4350
- Make use of devm_* to simplify error handling for many of the setup
calls in probe() / tear down in remove() and error paths. Some more
work to be done on this one.
- Use dev_err_probe() for errors in probe() callback.
adi,adf4413
- Typo in function name prefix.
adi,adxl345
- Add channel scale to the chip type specific structure and drop
using a type field previously used for indirection.
asahi,ak8985
- Fix a mismatch introduced when switching from enum->pointers
in the match tables.
amlogic,meson
- Expand error logging during probe.
invensense,mpu6050
- Support level-shifter control. Whilst no one is sure exactly what this
is doing it is needed for some old boards.
- Document mount-matrix dt-binding.
mediatek,mt6577
- Use devm_clk_get_enabled() to replace open coded version and move
everything over to being device managed. Drop now empty remove()
callback. Fix follows to put the drvdata back.
- Use dev_err_probe() for error reporting in probe() callback.
memsic,mxc4005
- Add of_match_table.
microchip,mcp4725
- Move various chip specific data from being looked up by chip ID to
data in the chip type specific structure.
silicon-labs,si7005
- Add of_match_table and entry in trivial-devices.yaml
st,lsm6dsx
- Add missing mount-matrix dt binding documentation.
st,spear
- Use devm_clk_get_enabled() and some other devm calls to move everything
over to being device managed. Drop now empty remove() callback.
- Use dev_err_probe() to better handled deferred probing and tidy up
error reporting in probe() callback.
st,stm32-adc
- Add a bit of additional checking in probe() to protect against a NULL
pointer (no known path to trigger it today).
- Replace deprecated strncpy()
ti,ads1015
- Allow for edge triggers.
- Document interrupt in dt-bindings.
* tag 'iio-for-6.7a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (201 commits)
iio: Use device_get_match_data()
iio: adc: MCP3564: fix warn: unsigned '__x' is never less than zero.
dt-bindings: trivial-devices: add silabs,si7005
iio: si7005: Add device tree support
drivers: imu: adis16475.c: Remove scan index from delta channels
dt-bindings: iio: imu: st,lsm6dsx: add mount-matrix property
iio: resolver: ad2s1210: remove of_match_ptr()
iio: resolver: ad2s1210: remove DRV_NAME macro
iio: resolver: ad2s1210: move out of staging
staging: iio: resolver: ad2s1210: simplify code with guard(mutex)
staging: iio: resolver: ad2s1210: clear faults after soft reset
staging: iio: resolver: ad2s1210: refactor sample toggle
staging: iio: resolver: ad2s1210: remove fault attribute
staging: iio: resolver: ad2s1210: add label attribute support
staging: iio: resolver: ad2s1210: add register/fault support summary
staging: iio: resolver: ad2s1210: implement fault events
iio: event: add optional event label support
staging: iio: resolver: ad2s1210: rename DOS reset min/max attrs
staging: iio: resolver: ad2s1210: convert DOS mismatch threshold to event attr
staging: iio: resolver: ad2s1210: convert DOS overrange threshold to event attr
...
|
|
Commit 0113a99b8a75 ("eeprom: Remove deprecated legacy eeprom driver")
already removes the eeprom driver's code.
Remove also the eeprom driver's documentation and MAINTAINERS section.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Link: https://lore.kernel.org/r/20231012042834.6663-1-lukas.bulwahn@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We need the char/misc fixes in here as well, to build on for other
changes.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here is a small set of char/misc and other smaller driver subsystem
fixes for 6.6-rc6. Included in here are:
- lots of iio driver fixes
- binder memory leak fix
- mcb driver fixes
- counter driver fixes
- firmware loader documentation fix
- documentation update for embargoed hardware issues
All of these have been in linux-next for over a week with no reported
issues"
* tag 'char-misc-6.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (22 commits)
iio: pressure: ms5611: ms5611_prom_is_valid false negative bug
dt-bindings: iio: adc: adi,ad7292: Fix additionalProperties on channel nodes
iio: adc: ad7192: Correct reference voltage
iio: light: vcnl4000: Don't power on/off chip in config
iio: addac: Kconfig: update ad74413r selections
iio: pressure: dps310: Adjust Timeout Settings
iio: imu: bno055: Fix missing Kconfig dependencies
iio: adc: imx8qxp: Fix address for command buffer registers
iio: cros_ec: fix an use-after-free in cros_ec_sensors_push_data()
iio: irsd200: fix -Warray-bounds bug in irsd200_trigger_handler
dt-bindings: iio: rohm,bu27010: add missing vdd-supply to example
binder: fix memory leaks of spam and pending work
firmware_loader: Update contact emails for ABI docs
Documentation: embargoed-hardware-issues.rst: Clarify prenotifaction
mcb: remove is_added flag from mcb_device struct
coresight: tmc-etr: Disable warnings for allocation failures
coresight: Fix run time warnings while reusing ETR buffer
iio: admv1013: add mixer_vgate corner cases
iio: pressure: bmp280: Fix NULL pointer exception
iio: dac: ad3552r: Correct device IDs
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/overlayfs/vfs
Pull overlayfs fixes from Amir Goldstein:
- Various fixes for regressions due to conversion to new mount
api in v6.5
- Disable a new mount option syntax (append lowerdir) that was
added in v6.5 because we plan to add a different lowerdir
append syntax in v6.7
* tag 'ovl-fixes-6.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/overlayfs/vfs:
ovl: temporarily disable appending lowedirs
ovl: fix regression in showing lowerdir mount option
ovl: fix regression in parsing of mount options with escaped comma
fs: factor out vfs_parse_monolithic_sep() helper
|
|
This simple I2C humidity sensor does not have any additional properties
and can be added to the trivial-devices binding.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231012-topic-si7005_devicetree-v1-2-6c8a6fa7b3ec@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Add the mount-matrix optional property to the binding since it's supported
and very useful when using the chip on a board.
Signed-off-by: Martin Kepplinger <martink@posteo.de>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20231012142041.253332-1-martink@posteo.de
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Before commit b36a5780cb44 ("ovl: modify layer parameter parsing"),
spaces and commas in lowerdir mount option value used to be escaped using
seq_show_option().
In current upstream, when lowerdir value has a space, it is not escaped
in /proc/mounts, e.g.:
none /mnt overlay rw,relatime,lowerdir=l l,upperdir=u,workdir=w 0 0
which results in broken output of the mount utility:
none on /mnt type overlay (rw,relatime,lowerdir=l)
Store the original lowerdir mount options before unescaping and show
them using the same escaping used for seq_show_option() in addition to
escaping the colon separator character.
Fixes: b36a5780cb44 ("ovl: modify layer parameter parsing")
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine fixes from Vinod Koul:
"Driver fixes for:
- stm32 dma residue calculation and chaining
- stm32 mdma for setting inflight bytes, residue calculation and
resume abort
- channel request, channel enable and dma error in fsl_edma
- runtime pm imbalance in ste_dma40 driver
- deadlock fix in mediatek driver"
* tag 'dmaengine-fix-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine:
dmaengine: fsl-edma: fix all channels requested when call fsl_edma3_xlate()
dmaengine: stm32-dma: fix residue in case of MDMA chaining
dmaengine: stm32-dma: fix stm32_dma_prep_slave_sg in case of MDMA chaining
dmaengine: stm32-mdma: set in_flight_bytes in case CRQA flag is set
dmaengine: stm32-mdma: use Link Address Register to compute residue
dmaengine: stm32-mdma: abort resume if no ongoing transfer
dmaengine: ste_dma40: Fix PM disable depth imbalance in d40_probe
dmaengine: mediatek: Fix deadlock caused by synchronize_irq()
dmaengine: idxd: use spin_lock_irqsave before wait_event_lock_irq
dmaengine: fsl-edma: fix edma4 channel enable failure on second attempt
dt-bindings: dmaengine: zynqmp_dma: add xlnx,bus-width required property
dmaengine: fsl-dma: fix DMA error when enabling sg if 'DONE' bit is set
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq
Pull workqueue fixes from Tejun Heo:
- Fix access-after-free in pwq allocation error path
- Implicitly ordered unbound workqueues should lose the implicit
ordering if an attribute change which isn't compatible with ordered
operation is requested. However, attribute changes requested through
the sysfs interface weren't doing that leaving no way to override the
implicit ordering through the sysfs interface. Fix it.
- Other doc and misc updates
* tag 'wq-for-6.6-rc5-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
workqueue: fix -Wformat-truncation in create_worker
workqueue: Override implicit ordered attribute in workqueue_apply_unbound_cpumask()
workqueue: Use the kmem_cache_free() instead of kfree() to release pwq
workqueue: doc: Fix function and sysfs path errors
workqueue: Fix UAF report by KASAN in pwq_release_workfn()
|
|
alloc_ordered_queue -> alloc_ordered_workqueue
/sys/devices/virtual/WQ_NAME/
-> /sys/devices/virtual/workqueue/WQ_NAME/
Signed-off-by: WangJinchao <wangjinchao@xfusion.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
This moves the ad2s1210 resolver driver out of staging. The driver has
been fixed up and is ready to graduate.
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://lore.kernel.org/r/20231010-ad2s1210-mainline-v5-4-35a0f6ffa04a@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
When reading the position and velocity on the AD2S1210, there is also a
3rd byte following the two data bytes that contains the fault flag bits.
This patch adds support for reading this byte and generating events when
faults occur.
The faults are mapped to various channels and event type in order to
have a unique event for each fault.
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://lore.kernel.org/r/20231005-ad2s1210-mainline-v4-13-ec00746840fc@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
enums"
Reverted as Rob Herring is tracking undocumented compatibles and as per
discussion in the thread, we can not remove this deprecated compatibles from
the driver without potential/likely regressions. So keep it around
as it's not that painful anyway.
This reverts commit 711fb79a1ea8e79dc600f25d9f8c1ac25870b4de.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Thomas Gleixner:
"A set of updates for interrupt chip drivers:
- Fix the fail of the Qualcomm PDC driver on v3.2 hardware which is
caused by a control bit being moved to a different location
- Update the SM8150 device tree PDC resource so the version register
can be read
- Make the Renesas RZG2L driver correct for interrupts which are
outside of the LSB in the TSSR register by using the proper macro
for calculating the mask
- Document the Renesas RZ2GL device tree binding correctly and update
them for a few devices which faul to boot otherwise
- Use the proper accessor in the RZ2GL driver instead of blindly
dereferencing an unchecked pointer
- Make GICv3 handle the dma-non-coherent attribute correctly
- Ensure that all interrupt controller nodes on RISCV are marked as
initialized correctly
Maintainer changes:
- Add a new entry for GIC interrupt controllers and assign Marc
Zyngier as the maintainer
- Remove Marc Zyngier from the core and driver maintainer entries as
he is burried in work and short of time to handle that.
Thanks to Marc for all the great work he has done in the past couple
of years!
Also note that commit 5873d380f4c0 ("irqchip/qcom-pdc: Add support for
v3.2 HW") has a incorrect SOB chain.
The real author is Neil. His patch was posted by Dmitry once and Neil
picked it up from the list and reposted it with the bogus SOB chain.
Not a big deal, but worth to mention. I wanted to fix that up, but
then got distracted and Marc piled more changes on top. So I decided
to leave it as is instead of rebasing world"
* tag 'irq-urgent-2023-10-10-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
MAINTAINERS: Remove myself from the general IRQ subsystem maintenance
MAINTAINERS: Add myself as the ARM GIC maintainer
irqchip/renesas-rzg2l: Convert to irq_data_get_irq_chip_data()
irqchip/stm32-exti: add missing DT IRQ flag translation
irqchip/riscv-intc: Mark all INTC nodes as initialized
irqchip/gic-v3: Enable non-coherent redistributors/ITSes DT probing
irqchip/gic-v3-its: Split allocation from initialisation of its_node
dt-bindings: interrupt-controller: arm,gic-v3: Add dma-noncoherent property
dt-bindings: interrupt-controller: renesas,irqc: Add r8a779f0 support
dt-bindings: interrupt-controller: renesas,rzg2l-irqc: Document RZ/G2UL SoC
irqchip: renesas-rzg2l: Fix logic to clear TINT interrupt source
dt-bindings: interrupt-controller: renesas,rzg2l-irqc: Update description for '#interrupt-cells' property
arm64: dts: qcom: sm8150: extend the size of the PDC resource
irqchip/qcom-pdc: Add support for v3.2 HW
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of pending fixes since a couple of weeks ago, which
became slightly bigger than usual due to my vacation.
Most of changes are about ASoC device-specific fixes while USB- and
HD-audio received quirks as usual. All fixes, including two ASoC core
changes, are reasonably small and safe to apply"
* tag 'sound-6.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (23 commits)
ALSA: usb-audio: Fix microphone sound on Nexigo webcam.
ALSA: hda/realtek: Change model for Intel RVP board
ALSA: usb-audio: Fix microphone sound on Opencomm2 Headset
ALSA: hda: cs35l41: Cleanup and fix double free in firmware request
ASoC: dt-bindings: fsl,micfil: Document #sound-dai-cells
ASoC: amd: yc: Fix non-functional mic on Lenovo 82YM
ASoC: tlv320adc3xxx: BUG: Correct micbias setting
ASoC: rt5682: Fix regulator enable/disable sequence
ASoC: hdmi-codec: Fix broken channel map reporting
ASoC: core: Do not call link_exit() on uninitialized rtd objects
ASoC: core: Print component name when printing log
ASoC: SOF: amd: fix for firmware reload failure after playback
ASoC: fsl-asoc-card: use integer type for fll_id and pll_id
ASoC: fsl_sai: Don't disable bitclock for i.MX8MP
dt-bindings: ASoC: rockchip: Add compatible for RK3128 spdif
ASoC: soc-generic-dmaengine-pcm: Fix function name in comment
ALSA: hda/realtek - ALC287 merge RTK codec with CS CS35L41 AMP
ASoC: simple-card: fixup asoc_simple_probe() error handling
ASoC: simple-card-utils: fixup simple_util_startup() error handling
ASoC: Intel: sof_sdw: add support for SKU 0B14
...
|
|
* icc-misc
interconnect: imx: Replace custom implementation of COUNT_ARGS()
interconnect: msm8974: Replace custom implementation of COUNT_ARGS()
interconnect: qcom: osm-l3: Replace custom implementation of COUNT_ARGS()
interconnect: fix error handling in qnoc_probe()
interconnect: imx: Replace inclusion of kernel.h in the header
dt-bindings: interconnect: qcom,rpmh: do not require reg on SDX65 MC virt
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
The MC virt interconnect in SDX65 DTSI does not have reg. Similarly in
the downstream DTS, thus assume this is an interconnect without own
dedicated IO address space. This fixes dtbs_check warnings like:
qcom-sdx65-mtp.dtb: interconnect-mc-virt: 'reg' is a required property
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230827114026.47806-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
Add interconnect driver support for SDX75 platform.
* icc-sdx75
dt-bindings: interconnect: Add compatibles for SDX75
interconnect: qcom: Add SDX75 interconnect provider driver
Link: https://lore.kernel.org/r/1694614256-24109-1-git-send-email-quic_rohiagar@quicinc.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>anter a commit message to explain why this merge is necessary,
|
|
Add dt-bindings compatibles and interconnect IDs for
Qualcomm SDX75 platform.
Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/1694614256-24109-2-git-send-email-quic_rohiagar@quicinc.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
One example is enough, remove the others and fix up the indentation
while at it.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230721-topic-icc_bindings-v2-7-e33d5acbf3bd@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
Following the recent cleanups and untanglements, remove abusive
direct references to RPM bus clocks, include the rpm-common YAML and
update Georgi's email.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230721-topic-icc_bindings-v2-6-e33d5acbf3bd@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
Separate out MSM8939 icc bindings from the common file and fix the
clocks description by removing the wrong internal RPM bus clock
representation that we've been carrying for years.
This was the final one, so also retire the shared file.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230721-topic-icc_bindings-v2-5-e33d5acbf3bd@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
Separate out MSM8996 icc bindings from the common file and fix the
clocks description by removing the wrong internal RPM bus clock
representation that we've been carrying for years.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230721-topic-icc_bindings-v2-4-e33d5acbf3bd@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
Separate out SDM660 icc bindings from the common file and fix the
clocks description by removing the wrong internal RPM bus clock
representation that we've been carrying for years.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230721-topic-icc_bindings-v2-3-e33d5acbf3bd@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
After the recent reshuffling, bus clocks are no longer exposed as RPM
clocks. Remove the old description.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230721-topic-icc_bindings-v2-2-e33d5acbf3bd@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
The current RPM interconnect bindings are messy. Start cleaning them
up with a common include.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230721-topic-icc_bindings-v2-1-e33d5acbf3bd@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree fixes from Rob Herring:
- Fix potential memory leak in of_changeset_action()
- Fix some i.MX binding warnings
- Fix typo in renesas,vin binding field-even-active property
- Fix andestech,ax45mp-cache example unit-address
- Add missing additionalProperties on RiscV CPU interrupt-controller
node
- Add missing unevaluatedProperties on media bindings
- Fix brcm,iproc-pcie binding 'msi' child node schema
- Fix MEMSIC MXC4005 compatible string
* tag 'devicetree-fixes-for-6.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
dt-bindings: trivial-devices: Fix MEMSIC MXC4005 compatible string
dt-bindings: PCI: brcm,iproc-pcie: Fix 'msi' child node schema
dt-bindings: PCI: brcm,iproc-pcie: Drop common pci-bus properties
dt-bindings: PCI: brcm,iproc-pcie: Fix example indentation
media: dt-bindings: Add missing unevaluatedProperties on child node schemas
dt-bindings: bus: fsl,imx8qxp-pixel-link-msi-bus: Drop child 'reg' property
media: dt-bindings: imx7-csi: Make power-domains not required for imx8mq
dt-bindings: media: renesas,vin: Fix field-even-active spelling
dt-bindings: cache: andestech,ax45mp-cache: Fix unit address in example
of: overlay: Reorder struct fragment fields kerneldoc
dt-bindings: display: fsl,imx6-hdmi: Change to 'unevaluatedProperties: false'
dt-bindings: riscv: cpus: Add missing additionalProperties on interrupt-controller node
of: dynamic: Fix potential memory leak in of_changeset_action()
|
|
The GIC v3 specifications allow redistributors and ITSes interconnect
ports used to access memory to be wired up in a way that makes the
respective initiators/memory observers non-coherent.
Add the standard dma-noncoherent property to the GICv3 bindings to
allow firmware to describe the redistributors/ITSes components and
interconnect ports behaviour in system designs where the redistributors
and ITSes are not coherent with the CPU.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Cc: Rob Herring <robh@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20231006125929.48591-2-lpieralisi@kernel.org
|
|
Document support for the Interrupt Controller for External Devices
(INT-EX) in the Renesas R-Car S4-8 (R8A779F0) SoC.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/9467a1c67d5d240211f88336973fa968d39cc860.1690446928.git.geert+renesas@glider.be
|
|
Document RZ/G2UL (R9A07G043U) IRQC bindings. The IRQC block on RZ/G2UL SoC
is almost identical to one found on the RZ/G2L SoC the only difference
being it can support BUS_ERR_INT for which it has additional registers.
Hence new generic compatible string "renesas,r9a07g043u-irqc" is added
for RZ/G2UL SoC.
Now that we have additional interrupt for RZ/G2UL and RZ/Five SoC
interrupt-names property is added so that we can parse them based on
names.
While at it updated the example node to four spaces and added
interrupt-names property.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20231006121058.13890-1-prabhakar.mahadev-lad.rj@bp.renesas.com
|
|
The correct name of this chip is MXC4005, not MX4005. This is confirmed
both by the manufacturer website and by the title of the original commit,
which added other MXCxxxx devices as well but only this one misses a "c" in
the compatible string.
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Fixes: d9bf5d37fd58 ("dt-bindings:trivial-devices: Add memsic,mxc4005/mxc6255/mxc6655 entries")
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231004-mxc4005-device-tree-support-v1-1-e7c0faea72e4@bootlin.com
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
The 'msi' child node schema is missing constraints on additional properties.
It turns out it is incomplete and properties for it are documented in the
parent node by mistake. Move the reference to msi-controller.yaml and
the custom properties to the 'msi' node. Adding 'unevaluatedProperties'
ensures all the properties in the 'msi' node are documented.
With the schema corrected, a minimal interrupt controller node is needed
to properly decode the interrupt properties since the example has
multiple interrupt parents.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Fixes: 905b986d099c ("dt-bindings: pci: Convert iProc PCIe to YAML")
Link: https://lore.kernel.org/r/20230926155613.33904-3-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Drop the unnecessary listing of properties already defined in
pci-bus.yaml. Unless there are additional constraints, it is not
necessary.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20230926155351.31117-2-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
The example's indentation is off. While fixing this, the 'bus' node
is unnecessary and can be dropped. It is also preferred to split up
unrelated examples to their own entries.
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230926155351.31117-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Just as unevaluatedProperties or additionalProperties are required at
the top level of schemas, they should (and will) also be required for
child node schemas. That ensures only documented properties are
present for any node.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230925212803.1976803-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
A bus schema based on simple-pm-bus shouldn't define how many 'reg' entries
a child device has. That is a property of the device. Drop the 'reg' entry.
Reviewed-by: Liu Ying <victor.liu@nxp.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230925212639.1975002-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
On i.MX8MQ the MIPI CSI block does have an associated power-domain, but
the CSI bridge does not.
Remove the power-domains requirement from the i.MX8MQ CSI bridge
to fix the following schema warning:
imx8mq-librem5-r4.dtb: csi@30a90000: 'power-domains' is a required property
from schema $id: http://devicetree.org/schemas/media/nxp,imx7-csi.yaml#
Fixes: de655386845a ("media: dt-bindings: media: imx7-csi: Document i.MX8M power-domains property")
Signed-off-by: Fabio Estevam <festevam@denx.de>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Link: https://lore.kernel.org/r/20231004201105.2323758-1-festevam@gmail.com
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-linus
Jonathan writes:
1st set of IIO fixes for 6.6
Note last minute rebase to fix up a stale Fixes tag. All patches have been
in Linux-next for some time.
adi,ad3552r
- Fix swapped device IDs for the two parts that are supported.
adi,ad7192
- Use the right reference voltage source.
adi,ad7292
- Fix additionalProperties to be false, not true.
adi,ad74413
- Add missing Kconfig depends on IIO_BUFFER and IIO_TRIGGERED_BUFFER
adi,admv1013
- Fix up some corner cases for the mixer vgate register value.
bosch,bmp280
- Fix a null pointer dereference caused by a wrong boolean operator.
bosch,bno055
- Add missing Kconfig depends on IIO_BUFFER and IIO_TRIGGERED_BUFFER
freescale,imx8eqxp
- Fix some wrong register addresses.
google,cros_ec
- Fix a use after free if very badly timed buffer disable occurs by
holding the device in buffered mode.
infineon,dps310
- Expand a timeout so we don't hit it on working parts.
meas,m5611
- Allow for a ROM CRC of 0 as it is a valid value and there are devices
out there where it happens.
murata,irsd200
- Make sure the buffer used to build up the scan is large enough to take
the timestamp.
rohm,bu27010 binding
- Add a missing required vdd-supply
vishay,vcnl4000
- Don't power down chip in wrong place.
* tag 'iio-fixes-for-6.6a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio:
iio: pressure: ms5611: ms5611_prom_is_valid false negative bug
dt-bindings: iio: adc: adi,ad7292: Fix additionalProperties on channel nodes
iio: adc: ad7192: Correct reference voltage
iio: light: vcnl4000: Don't power on/off chip in config
iio: addac: Kconfig: update ad74413r selections
iio: pressure: dps310: Adjust Timeout Settings
iio: imu: bno055: Fix missing Kconfig dependencies
iio: adc: imx8qxp: Fix address for command buffer registers
iio: cros_ec: fix an use-after-free in cros_ec_sensors_push_data()
iio: irsd200: fix -Warray-bounds bug in irsd200_trigger_handler
dt-bindings: iio: rohm,bu27010: add missing vdd-supply to example
iio: admv1013: add mixer_vgate corner cases
iio: pressure: bmp280: Fix NULL pointer exception
iio: dac: ad3552r: Correct device IDs
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"A typo fix for a PMU driver, a workround for a side-channel erratum on
Cortex-A520 and a fix for the local timer save/restore when using ACPI
with Qualcomm's custom CPUs:
- Workaround for Cortex-A520 erratum #2966298
- Fix typo in Arm CMN PMU driver that breaks counter overflow handling
- Fix timer handling across idle for Qualcomm custom CPUs"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
cpuidle, ACPI: Evaluate LPI arch_flags for broadcast timer
arm64: errata: Add Cortex-A520 speculative unprivileged load workaround
arm64: Add Cortex-A520 CPU part definition
perf/arm-cmn: Fix the unhandled overflow status of counter 4 to 7
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: More fixes for v6.6
Some additional fixes for v6.6, some fairly unremarkable driver specific
ones and a couple of minor core fixes for error handling and improved
logging.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs
Pull erofs fixes from Gao Xiang:
- Fix a memory leak issue when using LZMA global compressed
deduplication
- Fix empty device tags in flatdev mode
- Update documentation for recent new features
* tag 'erofs-for-6.6-rc5-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
erofs: update documentation
erofs: allow empty device tags in flatdev mode
erofs: fix memory leak of LZMA global compressed deduplication
|
|
Document the device-tree bindings for Realtek SoCs Type-C.
Realtek DHC (digital home center) RTD SoCs support a Type-C module.
Link: https://lore.kernel.org/lkml/20230904051253.23208-2-stanley_chang@realtek.com/
Signed-off-by: Stanley Chang <stanley_chang@realtek.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
|
