summaryrefslogtreecommitdiff
path: root/MAINTAINERS
AgeCommit message (Collapse)Author
2018-02-06Merge tag 'pci-v4.16-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: - skip AER driver error recovery callbacks for correctable errors reported via ACPI APEI, as we already do for errors reported via the native path (Tyler Baicar) - fix DPC shared interrupt handling (Alex Williamson) - print full DPC interrupt number (Keith Busch) - enable DPC only if AER is available (Keith Busch) - simplify DPC code (Bjorn Helgaas) - calculate ASPM L1 substate parameter instead of hardcoding it (Bjorn Helgaas) - enable Latency Tolerance Reporting for ASPM L1 substates (Bjorn Helgaas) - move ASPM internal interfaces out of public header (Bjorn Helgaas) - allow hot-removal of VGA devices (Mika Westerberg) - speed up unplug and shutdown by assuming Thunderbolt controllers don't support Command Completed events (Lukas Wunner) - add AtomicOps support for GPU and Infiniband drivers (Felix Kuehling, Jay Cornwall) - expose "ari_enabled" in sysfs to help NIC naming (Stuart Hayes) - clean up PCI DMA interface usage (Christoph Hellwig) - remove PCI pool API (replaced with DMA pool) (Romain Perier) - deprecate pci_get_bus_and_slot(), which assumed PCI domain 0 (Sinan Kaya) - move DT PCI code from drivers/of/ to drivers/pci/ (Rob Herring) - add PCI-specific wrappers for dev_info(), etc (Frederick Lawler) - remove warnings on sysfs mmap failure (Bjorn Helgaas) - quiet ROM validation messages (Alex Deucher) - remove redundant memory alloc failure messages (Markus Elfring) - fill in types for compile-time VGA and other I/O port resources (Bjorn Helgaas) - make "pci=pcie_scan_all" work for Root Ports as well as Downstream Ports to help AmigaOne X1000 (Bjorn Helgaas) - add SPDX tags to all PCI files (Bjorn Helgaas) - quirk Marvell 9128 DMA aliases (Alex Williamson) - quirk broken INTx disable on Ceton InfiniTV4 (Bjorn Helgaas) - fix CONFIG_PCI=n build by adding dummy pci_irqd_intx_xlate() (Niklas Cassel) - use DMA API to get MSI address for DesignWare IP (Niklas Cassel) - fix endpoint-mode DMA mask configuration (Kishon Vijay Abraham I) - fix ARTPEC-6 incorrect IS_ERR() usage (Wei Yongjun) - add support for ARTPEC-7 SoC (Niklas Cassel) - add endpoint-mode support for ARTPEC (Niklas Cassel) - add Cadence PCIe host and endpoint controller driver (Cyrille Pitchen) - handle multiple INTx status bits being set in dra7xx (Vignesh R) - translate dra7xx hwirq range to fix INTD handling (Vignesh R) - remove deprecated Exynos PHY initialization code (Jaehoon Chung) - fix MSI erratum workaround for HiSilicon Hip06/Hip07 (Dongdong Liu) - fix NULL pointer dereference in iProc BCMA driver (Ray Jui) - fix Keystone interrupt-controller-node lookup (Johan Hovold) - constify qcom driver structures (Julia Lawall) - rework Tegra config space mapping to increase space available for endpoints (Vidya Sagar) - simplify Tegra driver by using bus->sysdata (Manikanta Maddireddy) - remove PCI_REASSIGN_ALL_BUS usage on Tegra (Manikanta Maddireddy) - add support for Global Fabric Manager Server (GFMS) event to Microsemi Switchtec switch driver (Logan Gunthorpe) - add IDs for Switchtec PSX 24xG3 and PSX 48xG3 (Kelvin Cao) * tag 'pci-v4.16-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (140 commits) PCI: cadence: Add EndPoint Controller driver for Cadence PCIe controller dt-bindings: PCI: cadence: Add DT bindings for Cadence PCIe endpoint controller PCI: endpoint: Fix EPF device name to support multi-function devices PCI: endpoint: Add the function number as argument to EPC ops PCI: cadence: Add host driver for Cadence PCIe controller dt-bindings: PCI: cadence: Add DT bindings for Cadence PCIe host controller PCI: Add vendor ID for Cadence PCI: Add generic function to probe PCI host controllers PCI: generic: fix missing call of pci_free_resource_list() PCI: OF: Add generic function to parse and allocate PCI resources PCI: Regroup all PCI related entries into drivers/pci/Makefile PCI/DPC: Reformat DPC register definitions PCI/DPC: Add and use DPC Status register field definitions PCI/DPC: Squash dpc_rp_pio_get_info() into dpc_process_rp_pio_error() PCI/DPC: Remove unnecessary RP PIO register structs PCI/DPC: Push dpc->rp_pio_status assignment into dpc_rp_pio_get_info() PCI/DPC: Squash dpc_rp_pio_print_error() into dpc_rp_pio_get_info() PCI/DPC: Make RP PIO log size check more generic PCI/DPC: Rename local "status" to "dpc_status" PCI/DPC: Squash dpc_rp_pio_print_tlp_header() into dpc_rp_pio_print_error() ...
2018-02-05powerpc, membarrier: Skip memory barrier in switch_mm()Mathieu Desnoyers
Allow PowerPC to skip the full memory barrier in switch_mm(), and only issue the barrier when scheduling into a task belonging to a process that has registered to use expedited private. Threads targeting the same VM but which belong to different thread groups is a tricky case. It has a few consequences: It turns out that we cannot rely on get_nr_threads(p) to count the number of threads using a VM. We can use (atomic_read(&mm->mm_users) == 1 && get_nr_threads(p) == 1) instead to skip the synchronize_sched() for cases where the VM only has a single user, and that user only has a single thread. It also turns out that we cannot use for_each_thread() to set thread flags in all threads using a VM, as it only iterates on the thread group. Therefore, test the membarrier state variable directly rather than relying on thread flags. This means membarrier_register_private_expedited() needs to set the MEMBARRIER_STATE_PRIVATE_EXPEDITED flag, issue synchronize_sched(), and only then set MEMBARRIER_STATE_PRIVATE_EXPEDITED_READY which allows private expedited membarrier commands to succeed. membarrier_arch_switch_mm() now tests for the MEMBARRIER_STATE_PRIVATE_EXPEDITED flag. Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Andrea Parri <parri.andrea@gmail.com> Cc: Andrew Hunter <ahh@google.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Avi Kivity <avi@scylladb.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Boqun Feng <boqun.feng@gmail.com> Cc: Dave Watson <davejwatson@fb.com> Cc: David Sehr <sehr@google.com> Cc: Greg Hackmann <ghackmann@google.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Maged Michael <maged.michael@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Will Deacon <will.deacon@arm.com> Cc: linux-api@vger.kernel.org Cc: linux-arch@vger.kernel.org Cc: linuxppc-dev@lists.ozlabs.org Link: http://lkml.kernel.org/r/20180129202020.8515-3-mathieu.desnoyers@efficios.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-02-05dwc-xlgmac: remove Jie Deng as co-maintainerJie Deng
Jose Abreu is working on this driver and I will leave Synopsys soon. Thus it does not seem appropriate for me to be a co-maintainer anymore. Signed-off-by: Jie Deng <jiedeng@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-04Merge tag 'ntb-4.16' of git://github.com/jonmason/ntbLinus Torvalds
Pull NTB updates from Jon Mason: "Bug fixes galore, removal of the ntb atom driver, and updates to the ntb tools and tests to support the multi-port interface" * tag 'ntb-4.16' of git://github.com/jonmason/ntb: (37 commits) NTB: ntb_perf: fix cast to restricted __le32 ntb_perf: Fix an error code in perf_copy_chunk() ntb_hw_switchtec: Make function switchtec_ntb_remove() static NTB: ntb_tool: fix memory leak on 'buf' on error exit path NTB: ntb_perf: fix printing of resource_size_t NTB: ntb_hw_idt: Set NTB_TOPO_SWITCH topology NTB: ntb_test: Update ntb_perf tests NTB: ntb_test: Update ntb_tool MW tests NTB: ntb_test: Add ntb_tool Message tests NTB: ntb_test: Update ntb_tool Scratchpad tests NTB: ntb_test: Update ntb_tool DB tests NTB: ntb_test: Update ntb_tool link tests NTB: ntb_test: Add ntb_tool port tests NTB: ntb_test: Safely use paths with whitespace NTB: ntb_perf: Add full multi-port NTB API support NTB: ntb_tool: Add full multi-port NTB API support NTB: ntb_pp: Add full multi-port NTB API support NTB: Fix UB/bug in ntb_mw_get_align() NTB: Set dma mask and dma coherent mask to NTB devices NTB: Rename NTB messaging API methods ...
2018-02-04Merge branch 'i2c/for-4.16' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c updates from Wolfram Sang: "I2C has the following changes for you: - new flag to mark DMA safe buffers in i2c_msg. Also, some infrastructure around it. And docs. - huge refactoring of the at24 driver led by the new maintainer Bartosz - update I2C bus recovery to send STOP after recovery - conversion from gpio to gpiod for I2C bus recovery - adding a fault-injector to the i2c-gpio driver - lots of small driver improvements, and bigger ones to i2c-sh_mobile" * 'i2c/for-4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (99 commits) i2c: mv64xxx: Add myself as maintainer for this driver i2c: mv64xxx: Fix clock resource by adding an optional bus clock i2c: mv64xxx: Remove useless test before clk_disable_unprepare i2c: mxs: use true and false for boolean values i2c: meson: update doc description to fix build warnings i2c: meson: add configurable divider factors dt-bindings: i2c: update documentation for the Meson-AXG i2c: imx-lpi2c: add runtime pm support i2c: rcar: fix some trivial typos in comments i2c: davinci: fix the cpufreq transition i2c: rk3x: add proper kerneldoc header i2c: rk3x: account for const type of of_device_id.data i2c: acorn: remove outdated path from file header i2c: acorn: add MODULE_LICENSE tag i2c: rcar: implement bus recovery i2c: send STOP after successful bus recovery i2c: ensure SDA is released in recovery if SDA is controllable i2c: add 'set_sda' to bus_recovery_info i2c: add identifier in declarations for i2c_bus_recovery i2c: make kerneldoc about bus recovery more precise ...
2018-02-04IB: Update references to libibverbsJason Gunthorpe
These days the userspace comes from rdma-core, revise references in the kernel to point to the current repository. Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-02-03Merge branch 'fixes-v4.16-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security Pull integrity fixes from James Morris: - add James Bottommley as a Trusted Keys maintainer. - IMA: re-initialize iint->atomic_flags on iint_free(), from Mimi. * 'fixes-v4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: ima: re-initialize iint->atomic_flags maintainers: update trusted keys
2018-02-02Merge tag 'pinctrl-v4.16-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "This is the bulk of pin control changes for the v4.16 kernel cycle. Like with GPIO it is actually a bit calm this time. Core changes: - After lengthy discussions and partly due to my ignorance, we have merged a patch making pinctrl_force_default() and pinctrl_force_sleep() reprogram the states into the hardware of any hogged pins, even if they are already in the desired state. This only apply to hogged pins since groups of pins owned by drivers need to be managed by each driver, lest they could not do things like runtime PM and put pins to sleeping state even if the system as a whole is not in sleep. New drivers: - New driver for the Microsemi Ocelot SoC. This is used in ethernet switches. - The X-Powers AXP209 GPIO driver was extended to also deal with pin control and moved over from the GPIO subsystem. This circuit is a mixed-mode integrated circuit which is part of AllWinner designs. - New subdriver for the Qualcomm MSM8998 SoC, core of a high end mobile devices (phones) chipset. - New subdriver for the ST Microelectronics STM32MP157 MPU and STM32F769 MCU from the STM32 family. - New subdriver for the MediaTek MT7622 SoC. This is used for routers, repeater, gateways and such network infrastructure. - New subdriver for the NXP (former Freescale) i.MX 6ULL. This SoC has multimedia features and target "smart devices", I guess in-car entertainment, in-flight entertainment, industrial control panels etc. General improvements: - Incremental improvements on the SH-PFC subdrivers for things like the CAN bus. - Enable the glitch filter on Baytrail GPIOs used for interrupts. - Proper handling of pins to GPIO ranges on the Semtec SX150X - An IRQ setup ordering fix on MCP23S08. - A good set of janitorial coding style fixes" * tag 'pinctrl-v4.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (102 commits) pinctrl: mcp23s08: fix irq setup order pinctrl: Forward declare struct device pinctrl: sunxi: Use of_clk_get_parent_count() instead of open coding pinctrl: stm32: add STM32F769 MCU support pinctrl: sx150x: Add a static gpio/pinctrl pin range mapping pinctrl: sx150x: Register pinctrl before adding the gpiochip pinctrl: sx150x: Unregister the pinctrl on release pinctrl: ingenic: Remove redundant dev_err call in ingenic_pinctrl_probe() pinctrl: sprd: Use seq_putc() in sprd_pinconf_group_dbg_show() pinctrl: pinmux: Use seq_putc() in pinmux_pins_show() pinctrl: abx500: Use seq_putc() in abx500_gpio_dbg_show() pinctrl: mediatek: mt7622: align error handling of mtk_hw_get_value call pinctrl: mediatek: mt7622: fix potential uninitialized value being returned pinctrl: uniphier: refactor drive strength get/set functions pinctrl: imx7ulp: constify struct imx_cfg_params_decode pinctrl: imx: constify struct imx_pinctrl_soc_info pinctrl: imx7d: simplify imx7d_pinctrl_probe pinctrl: imx: use struct imx_pinctrl_soc_info as a const pinctrl: sunxi-pinctrl: fix pin funtion can not be match correctly. pinctrl: qcom: Add msm8998 pinctrl driver ...
2018-02-02Merge tag 'powerpc-4.16-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: "Highlights: - Enable support for memory protection keys aka "pkeys" on Power7/8/9 when using the hash table MMU. - Extend our interrupt soft masking to support masking PMU interrupts as well as "normal" interrupts, and then use that to implement local_t for a ~4x speedup vs the current atomics-based implementation. - A new driver "ocxl" for "Open Coherent Accelerator Processor Interface (OpenCAPI)" devices. - Support for new device tree properties on PowerVM to describe hotpluggable memory and devices. - Add support for CLOCK_{REALTIME/MONOTONIC}_COARSE to the 64-bit VDSO. - Freescale updates from Scott: fixes for CPM GPIO and an FSL PCI erratum workaround, plus a minor cleanup patch. As well as quite a lot of other changes all over the place, and small fixes and cleanups as always. Thanks to: Alan Modra, Alastair D'Silva, Alexey Kardashevskiy, Alistair Popple, Andreas Schwab, Andrew Donnellan, Aneesh Kumar K.V, Anju T Sudhakar, Anshuman Khandual, Anton Blanchard, Arnd Bergmann, Balbir Singh, Benjamin Herrenschmidt, Bhaktipriya Shridhar, Bryant G. Ly, Cédric Le Goater, Christophe Leroy, Christophe Lombard, Cyril Bur, David Gibson, Desnes A. Nunes do Rosario, Dmitry Torokhov, Frederic Barrat, Geert Uytterhoeven, Guilherme G. Piccoli, Gustavo A. R. Silva, Gustavo Romero, Ivan Mikhaylov, Joakim Tjernlund, Joe Perches, Josh Poimboeuf, Juan J. Alvarez, Julia Cartwright, Kamalesh Babulal, Madhavan Srinivasan, Mahesh Salgaonkar, Mathieu Malaterre, Michael Bringmann, Michael Hanselmann, Michael Neuling, Nathan Fontenot, Naveen N. Rao, Nicholas Piggin, Paul Mackerras, Philippe Bergheaud, Ram Pai, Russell Currey, Santosh Sivaraj, Scott Wood, Seth Forshee, Simon Guo, Stewart Smith, Sukadev Bhattiprolu, Thiago Jung Bauermann, Vaibhav Jain, Vasyl Gomonovych" * tag 'powerpc-4.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (199 commits) powerpc/mm/radix: Fix build error when RADIX_MMU=n macintosh/ams-input: Use true and false for boolean values macintosh: change some data types from int to bool powerpc/watchdog: Print the NIP in soft_nmi_interrupt() powerpc/watchdog: regs can't be null in soft_nmi_interrupt() powerpc/watchdog: Tweak watchdog printks powerpc/cell: Remove axonram driver rtc-opal: Fix handling of firmware error codes, prevent busy loops powerpc/mpc52xx_gpt: make use of raw_spinlock variants macintosh/adb: Properly mark continued kernel messages powerpc/pseries: Fix cpu hotplug crash with memoryless nodes powerpc/numa: Ensure nodes initialized for hotplug powerpc/numa: Use ibm,max-associativity-domains to discover possible nodes powerpc/kernel: Block interrupts when updating TIDR powerpc/powernv/idoa: Remove unnecessary pcidev from pci_dn powerpc/mm/nohash: do not flush the entire mm when range is a single page powerpc/pseries: Add Initialization of VF Bars powerpc/pseries/pci: Associate PEs to VFs in configure SR-IOV powerpc/eeh: Add EEH notify resume sysfs powerpc/eeh: Add EEH operations to notify resume ...
2018-02-02Merge branch 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-armLinus Torvalds
Pull ARM updates from Russell King: - StrongARM SA1111 updates to modernise and remove cruft - Add StrongARM gpio drivers for board GPIOs - Verify size of zImage is what we expect to avoid issues with appended DTB - nommu updates from Vladimir Murzin - page table read-write-execute checking from Jinbum Park - Broadcom Brahma-B15 cache updates from Florian Fainelli - Avoid failure with kprobes test caused by inappropriately placed kprobes - Remove __memzero optimisation (which was incorrectly being used directly by some drivers) * 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: (32 commits) ARM: 8745/1: get rid of __memzero() ARM: 8744/1: don't discard memblock for kexec ARM: 8743/1: bL_switcher: add MODULE_LICENSE tag ARM: 8742/1: Always use REFCOUNT_FULL ARM: 8741/1: B15: fix unused label warnings ARM: 8740/1: NOMMU: Make sure we do not hold stale data in mem[] array ARM: 8739/1: NOMMU: Setup VBAR/Hivecs for secondaries cores ARM: 8738/1: Disable CONFIG_DEBUG_VIRTUAL for NOMMU ARM: 8737/1: mm: dump: add checking for writable and executable ARM: 8736/1: mm: dump: make the page table dumping seq_file ARM: 8735/1: mm: dump: make page table dumping reusable ARM: sa1100/neponset: add GPIO drivers for control and modem registers ARM: sa1100/assabet: add BCR/BSR GPIO driver ARM: 8734/1: mm: idmap: Mark variables as ro_after_init ARM: 8733/1: hw_breakpoint: Mark variables as __ro_after_init ARM: 8732/1: NOMMU: Allow userspace to access background MPU region ARM: 8727/1: MAINTAINERS: Update brcmstb entries to cover B15 code ARM: 8728/1: B15: Register reboot notifier for KEXEC ARM: 8730/1: B15: Add suspend/resume hooks ARM: 8726/1: B15: Add CPU hotplug awareness ...
2018-02-02maintainers: update trusted keysMimi Zohar
Adding James Bottomley as the new maintainer for trusted keys. Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com> Signed-off-by: James Morris <jmorris@namei.org>
2018-02-01Merge tag 'drm-for-v4.16' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds
Pull drm updates from Dave Airlie: "This seems to have been a comparatively quieter merge window, I assume due to holidays etc. The "biggest" change is AMD header cleanups, which merge/remove a bunch of them. The AMD gpu scheduler is now being made generic with the etnaviv driver wanting to reuse the code, hopefully other drivers can go in the same direction. Otherwise it's the usual lots of stuff in i915/amdgpu, not so much stuff elsewhere. Core: - Add .last_close and .output_poll_changed helpers to reduce driver footprints - Fix plane clipping - Improved debug printing support - Add panel orientation property - Update edid derived properties at edid setting - Reduction in fbdev driver footprint - Move amdgpu scheduler into core for other drivers to use. i915: - Selftest and IGT improvements - Fast boot prep work on IPS, pipe config - HW workarounds for Cannonlake, Geminilake - Cannonlake clock and HDMI2.0 fixes - GPU cache invalidation and context switch improvements - Display planes cleanup - New PMU interface for perf queries - New firmware support for KBL/SKL - Geminilake HW workaround for perforamce - Coffeelake stolen memory improvements - GPU reset robustness work - Cannonlake horizontal plane flipping - GVT work amdgpu/radeon: - RV and Vega header file cleanups (lots of lines gone!) - TTM operation context support - 48-bit GPUVM support for Vega/RV - ECC support for Vega - Resizeable BAR support - Multi-display sync support - Enable swapout for reserved BOs during allocation - S3 fixes on Raven - GPU reset cleanup and fixes - 2+1 level GPU page table amdkfd: - GFX7/8 SDMA user queues support - Hardware scheduling for multiple processes - dGPU prep work rcar: - Added R8A7743/5 support - System suspend/resume support sun4i: - Multi-plane support for YUV formats - A83T and LVDS support msm: - Devfreq support for GPU tegra: - Prep work for adding Tegra186 support - Tegra186 HDMI support - HDMI2.0 and zpos support by using generic helpers tilcdc: - Misc fixes omapdrm: - Support memory bandwidth limits - DSI command mode panel cleanups - DMM error handling exynos: - drop the old IPP subdriver. etnaviv: - Occlusion query fixes - Job handling fixes - Prep work for hooking in gpu scheduler armada: - Move closer to atomic modesetting - Allow disabling primary plane if overlay is full screen imx: - Format modifier support - Add tile prefetch to PRE - Runtime PM support for PRG ast: - fix LUT loading" * tag 'drm-for-v4.16' of git://people.freedesktop.org/~airlied/linux: (1471 commits) drm/ast: Load lut in crtc_commit drm: Check for lessee in DROP_MASTER ioctl drm: fix gpu scheduler link order drm/amd/display: Demote error print to debug print when ATOM impl missing dma-buf: fix reservation_object_wait_timeout_rcu once more v2 drm/amdgpu: Avoid leaking PM domain on driver unbind (v2) drm/amd/amdgpu: Add Polaris version check drm/amdgpu: Reenable manual GPU reset from sysfs drm/amdgpu: disable MMHUB power gating on raven drm/ttm: Don't unreserve swapped BOs that were previously reserved drm/ttm: Don't add swapped BOs to swap-LRU list drm/amdgpu: only check for ECC on Vega10 drm/amd/powerplay: Fix smu_table_entry.handle type drm/ttm: add VADDR_FLAG_UPDATED_COUNT to correctly update dma_page global count drm: Fix PANEL_ORIENTATION_QUIRKS breaking the Kconfig DRM menuconfig drm/radeon: fill in rb backend map on evergreen/ni. drm/amdgpu/gfx9: fix ngg enablement to clear gds reserved memory (v2) drm/ttm: only free pages rather than update global memory count together drm/amdgpu: fix CPU based VM updates drm/amdgpu: fix typo in amdgpu_vce_validate_bo ...
2018-02-01Merge tag 'armsoc-soc' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC platform updates from Arnd Bergmann: "These are mostly minor bugfixes, cleanup and many defconfig updates to support added drivers. In particular OMAP and PXA keep cleaning up the legacy code base, as usual. Nvidia adds some more SoC support code for Tegra 186. For the first time on years, we are actually adding a non-DT platform for the EP93xx based Liebherr controller BK3.1. It's a minor variation of the EP93xx reference design and in active use, while EP93xx apparently doesn't have enough new development to have any device tree support" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (73 commits) ARM: omap: hwmod: fix section mismatch warnings ARM: pxa/tosa-bt: add MODULE_LICENSE tag arm64: defconfig: enable CONFIG_ACPI_APEI_EINJ arm64: defconfig: enable EDAC GHES option arm64: defconfig: enable CONFIG_ACPI_APEI_MEMORY_FAILURE ARM: imx_v6_v7_defconfig: enable CONFIG_CPU_FREQ_STAT Wind down ARM/TANGO port ARM: davinci: constify gpio_led ARM: davinci: drop unneeded newline soc: Add SoC driver for Gemini ARM: SAMSUNG: Add SPDX license identifiers ARM: S5PV210: Add SPDX license identifiers ARM: S3C64XX: Add SPDX license identifiers ARM: S3C24XX: Add SPDX license identifiers ARM: EXYNOS: Add SPDX license identifiers ARM: imx: remove unused imx3 pm definitions ARM: imx: don't abort MMDC probe if power saving status doesn't match ARM: imx_v6_v7_defconfig: enable RTC_DRV_MXC_V2 ARM: imx_v6_v7_defconfig: Add missing config for DART-MX6 SoM ARM: davinci: Use PTR_ERR_OR_ZERO() ...
2018-02-01Merge tag 'armsoc-dt' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC device tree updates from Arnd Bergmann: "We get a moderate number of new machines this time, and only one new SoC variant (Actions S700): Actions: - S700 Soc and CubieBoard7 development board - Allo.com Sparky Single-board-computer Allwinner: - Orange Pi R1 development board - Libre Computer Board ALL-H3-CC H3 single-board computer ASpeed ast2x00: - Witherspoon: OpenPower Power9 server manufactured by IBM that uses the ASPEED ast2500 - Zaius: OpenPower Power9 server manufactured by Invatech that uses the ASPEED ast2500 - Q71L: Intel Xeon server manufactured by Qanta that uses the ASPEED ast2400 AT91: - Axentia Nattis/Natte digital signage - sama5d2 PTC-ek Evaluation board Freescale/NXP i.MX: - SolidRun Humminboard2 development board - Variscite DART-MX6 SoM and Carrier-board - Technologic TS-4600 and TS-7970 development board - Toradex Colibri iMX7D SoM board - v1.5 variant of Solidrun Cubox-i and Hummingboard Freescale/NXP Layerscape: - Moxa UC-8410A Series industrial computer Gemini: - D-Link DNS-313 NAS enclosure OMAP: - LogicPD OMAP35xx SOM-LV devkit - LogicPD OMAP35xx Torpedo devkit Renesas: - r8a77970 (V3M) Starter Kit board - r8a7795 (M3-W) Salvator-XS board We finally managed to get the dtc warnings under control, with no more build-time warnings for bad device tree files. This includes fixes for the majority of platforms, including nomadik, samsung, lpc32xx, STi, spear, mediatek, freescale, qcom, realview, keystone, omap, kirkwood, renesas, hisilicon, and broadcom. Files get rearranged on a few platforms, in particular the Marvell Armada 7K/8K device tree files are changed in preparation for future SoC support, based on more than two of the same chips in one package, and some boards get renamed for oxnas for consistency. Finally, many existing SoCs gain descriptions for additional on-chip devices that we can now support with kernel drivers: - Allwinner A83t (drm, ethernet, i2c, ...), H3/H5 (USB-OTG) - Amlogic AXG family (clk, pinctrl, pwm, ...), and others (vpu, hdmi) - Aspeed clk controller support - Freescale LS1088A, LS1021A device support - Gemini Ethernet, PCI, TVE, panel - Keystone gpio, qspi, more uarts - Mediatek cpufreq, regulator, clock, reset - Marvell thermal, cpufreq, nand - Renesas SMP, thermal, timer, PWM, sound, phy, ipmmu - Rockchip Mipi, GPU, display - Samsung Exynos5433 PMU, power domain, nfc - Spreadtrum: sc9860 clocks - Tegra TX2 PSDI, HDMI, I2C,SMMU, display, fuse, ..." * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (690 commits) arm64: dts: stratix10: fix SPI settings ARM: dts: socfpga: add i2c reset signals arm64: dts: stratix10: add USB ECC reset bit arm64: dts: stratix10: enable USB on the devkit ARM: dts: socfpga: disable over-current for Arria10 USB devkit ARM: dts: Nokia N9: add support for up/down keys in the dts ARM: dts: nomadik: add interrupt-parent for clcd ARM: dts: Add ethernet to a bunch of platforms ARM: dts: Add ethernet to the Gemini SoC ARM: dts: rename oxnas dts files ARM: dts: s5pv210: add interrupt-parent for ohci ARM: lpc3250: fix uda1380 gpio numbers ARM: dts: STi: Add gpio polarity for "hdmi,hpd-gpio" property ARM: dts: dra7: Reduce shut down temperature of non-cpu thermal zones ARM: dts: n900: Add aliases for lcd and tvout displays ARM: dts: Update ti-sysc data for existing users ARM: dts: Fix smartreflex compatible for omap3 shared mpu-iva instance arm64: dts: marvell: armada-80x0: Fix pinctrl compatible string arm: spear13xx: Fix spics gpio controller's warning arm: spear13xx: Fix dmas cells ...
2018-02-01Merge tag 'char-misc-4.16-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver updates from Greg KH: "Here is the big pull request for char/misc drivers for 4.16-rc1. There's a lot of stuff in here. Three new driver subsystems were added for various types of hardware busses: - siox - slimbus - soundwire as well as a new vboxguest subsystem for the VirtualBox hypervisor drivers. There's also big updates from the FPGA subsystem, lots of Android binder fixes, the usual handful of hyper-v updates, and lots of other smaller driver updates. All of these have been in linux-next for a long time, with no reported issues" * tag 'char-misc-4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (155 commits) char: lp: use true or false for boolean values android: binder: use VM_ALLOC to get vm area android: binder: Use true and false for boolean values lkdtm: fix handle_irq_event symbol for INT_HW_IRQ_EN EISA: Delete error message for a failed memory allocation in eisa_probe() EISA: Whitespace cleanup misc: remove AVR32 dependencies virt: vbox: Add error mapping for VERR_INVALID_NAME and VERR_NO_MORE_FILES soundwire: Fix a signedness bug uio_hv_generic: fix new type mismatch warnings uio_hv_generic: fix type mismatch warnings auxdisplay: img-ascii-lcd: add missing MODULE_DESCRIPTION/AUTHOR/LICENSE uio_hv_generic: add rescind support uio_hv_generic: check that host supports monitor page uio_hv_generic: create send and receive buffers uio: document uio_hv_generic regions doc: fix documentation about uio_hv_generic vmbus: add monitor_id and subchannel_id to sysfs per channel vmbus: fix ABI documentation uio_hv_generic: use ISR callback method ...
2018-02-01Merge tag 'staging-4.16-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging/IIO updates from Greg KH: "Here is the big Staging and IIO driver patches for 4.16-rc1. There is the normal amount of new IIO drivers added, like all releases. The networking IPX and the ncpfs filesystem are moved into the staging tree, as they are on their way out of the kernel due to lack of use anymore. The visorbus subsystem finall has started moving out of the staging tree to the "real" part of the kernel, and the most and fsl-mc codebases are almost ready to move out, that will probably happen for 4.17-rc1 if all goes well. Other than that, there is a bunch of license header cleanups in the tree, along with the normal amount of coding style churn that we all know and love for this codebase. I also got frustrated at the Meltdown/Spectre mess and took it out on the dgnc tty driver, deleting huge chunks of it that were never even being used. Full details of everything is in the shortlog. All of these patches have been in linux-next for a while with no reported issues" * tag 'staging-4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (627 commits) staging: rtlwifi: remove redundant initialization of 'cfg_cmd' staging: rtl8723bs: remove a couple of redundant initializations staging: comedi: reformat lines to 80 chars or less staging: lustre: separate a connection destroy from free struct kib_conn Staging: rtl8723bs: Use !x instead of NULL comparison Staging: rtl8723bs: Remove dead code Staging: rtl8723bs: Change names to conform to the kernel code staging: ccree: Fix missing blank line after declaration staging: rtl8188eu: remove redundant initialization of 'pwrcfgcmd' staging: rtlwifi: remove unused RTLHALMAC_ST and RTLPHYDM_ST staging: fbtft: remove unused FB_TFT_SSD1325 kconfig staging: comedi: dt2811: remove redundant initialization of 'ns' staging: wilc1000: fix alignments to match open parenthesis staging: wilc1000: removed unnecessary defined enums typedef staging: wilc1000: remove unnecessary use of parentheses staging: rtl8192u: remove redundant initialization of 'timeout' staging: sm750fb: fix CamelCase for dispSet var staging: lustre: lnet/selftest: fix compile error on UP build staging: rtl8723bs: hal_com_phycfg: Remove unneeded semicolons staging: rts5208: Fix "seg_no" calculation in reset_ms_card() ...
2018-02-01Merge tag 'tty-4.16-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/staging driver updates from Greg KH: "Here is the big tty/serial driver update for 4.16-rc1. The usual number of various serial driver fixes and updates to try to get them to work with crazy hardware configurations (seriously, how many different ways are hardware engineers going to come up with to hook up a simple UART?) There is also some serdev bugfixes and updates, as well as a smattering of other small fixes in here. All have been in the linux-next tree for a while, with no reported issues" * tag 'tty-4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (65 commits) tty: serial: exar: Relocate sleep wake-up handling tty: fix data race between tty_init_dev and flush of buf serial: imx: fix endless loop during suspend serial: core: mark port as initialized after successful IRQ change serdev: only match serdev devices serdev: do not generate modaliases for controllers serial: mxs-auart: don't use GPIOF_* with gpiod_get_direction serial: 8250_dw: Revert "Improve clock rate setting" MAINTAINERS: Add myself as designated reviewer for 8250_dw gpio: serial: max310x: Support open-drain configuration for GPIOs serdev: Fix serdev_uevent failure on ACPI enumerated serdev-controllers serial: 8250_ingenic: Parse earlycon options serial: 8250_ingenic: Add support for the JZ4770 SoC serial: core: Make uart_parse_options take const char* argument serial: 8250_of: fix return code when probe function fails to get reset serial: imx: Only wakeup via RTSDEN bit if the system has RTS/CTS serial: 8250_uniphier: fix error return code in uniphier_uart_probe() tty: n_gsm: Allow ADM response in addition to UA for control dlci tty: omap-serial: Fix initial on-boot RTS GPIO level tty: serial: jsm: Add one check against NULL pointer dereference ...
2018-02-01Merge branch 'x86/hyperv' of ↵Radim Krčmář
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Topic branch for stable KVM clockource under Hyper-V. Thanks to Christoffer Dall for resolving the ARM conflict.
2018-01-31Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds
Pull networking updates from David Miller: 1) Significantly shrink the core networking routing structures. Result of http://vger.kernel.org/~davem/seoul2017_netdev_keynote.pdf 2) Add netdevsim driver for testing various offloads, from Jakub Kicinski. 3) Support cross-chip FDB operations in DSA, from Vivien Didelot. 4) Add a 2nd listener hash table for TCP, similar to what was done for UDP. From Martin KaFai Lau. 5) Add eBPF based queue selection to tun, from Jason Wang. 6) Lockless qdisc support, from John Fastabend. 7) SCTP stream interleave support, from Xin Long. 8) Smoother TCP receive autotuning, from Eric Dumazet. 9) Lots of erspan tunneling enhancements, from William Tu. 10) Add true function call support to BPF, from Alexei Starovoitov. 11) Add explicit support for GRO HW offloading, from Michael Chan. 12) Support extack generation in more netlink subsystems. From Alexander Aring, Quentin Monnet, and Jakub Kicinski. 13) Add 1000BaseX, flow control, and EEE support to mvneta driver. From Russell King. 14) Add flow table abstraction to netfilter, from Pablo Neira Ayuso. 15) Many improvements and simplifications to the NFP driver bpf JIT, from Jakub Kicinski. 16) Support for ipv6 non-equal cost multipath routing, from Ido Schimmel. 17) Add resource abstration to devlink, from Arkadi Sharshevsky. 18) Packet scheduler classifier shared filter block support, from Jiri Pirko. 19) Avoid locking in act_csum, from Davide Caratti. 20) devinet_ioctl() simplifications from Al viro. 21) More TCP bpf improvements from Lawrence Brakmo. 22) Add support for onlink ipv6 route flag, similar to ipv4, from David Ahern. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1925 commits) tls: Add support for encryption using async offload accelerator ip6mr: fix stale iterator net/sched: kconfig: Remove blank help texts openvswitch: meter: Use 64-bit arithmetic instead of 32-bit tcp_nv: fix potential integer overflow in tcpnv_acked r8169: fix RTL8168EP take too long to complete driver initialization. qmi_wwan: Add support for Quectel EP06 rtnetlink: enable IFLA_IF_NETNSID for RTM_NEWLINK ipmr: Fix ptrdiff_t print formatting ibmvnic: Wait for device response when changing MAC qlcnic: fix deadlock bug tcp: release sk_frag.page in tcp_disconnect ipv4: Get the address of interface correctly. net_sched: gen_estimator: fix lockdep splat net: macb: Handle HRESP error net/mlx5e: IPoIB, Fix copy-paste bug in flow steering refactoring ipv6: addrconf: break critical section in addrconf_verify_rtnl() ipv6: change route cache aging logic i40e/i40evf: Update DESC_NEEDED value to reflect larger value bnxt_en: cleanup DIM work on device shutdown ...
2018-01-31Merge branch 'linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto updates from Herbert Xu: "API: - Enforce the setting of keys for keyed aead/hash/skcipher algorithms. - Add multibuf speed tests in tcrypt. Algorithms: - Improve performance of sha3-generic. - Add native sha512 support on arm64. - Add v8.2 Crypto Extentions version of sha3/sm3 on arm64. - Avoid hmac nesting by requiring underlying algorithm to be unkeyed. - Add cryptd_max_cpu_qlen module parameter to cryptd. Drivers: - Add support for EIP97 engine in inside-secure. - Add inline IPsec support to chelsio. - Add RevB core support to crypto4xx. - Fix AEAD ICV check in crypto4xx. - Add stm32 crypto driver. - Add support for BCM63xx platforms in bcm2835 and remove bcm63xx. - Add Derived Key Protocol (DKP) support in caam. - Add Samsung Exynos True RNG driver. - Add support for Exynos5250+ SoCs in exynos PRNG driver" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (166 commits) crypto: picoxcell - Fix error handling in spacc_probe() crypto: arm64/sha512 - fix/improve new v8.2 Crypto Extensions code crypto: arm64/sm3 - new v8.2 Crypto Extensions implementation crypto: arm64/sha3 - new v8.2 Crypto Extensions implementation crypto: testmgr - add new testcases for sha3 crypto: sha3-generic - export init/update/final routines crypto: sha3-generic - simplify code crypto: sha3-generic - rewrite KECCAK transform to help the compiler optimize crypto: sha3-generic - fixes for alignment and big endian operation crypto: aesni - handle zero length dst buffer crypto: artpec6 - remove select on non-existing CRYPTO_SHA384 hwrng: bcm2835 - Remove redundant dev_err call in bcm2835_rng_probe() crypto: stm32 - remove redundant dev_err call in stm32_cryp_probe() crypto: axis - remove unnecessary platform_get_resource() error check crypto: testmgr - test misuse of result in ahash crypto: inside-secure - make function safexcel_try_push_requests static crypto: aes-generic - fix aes-generic regression on powerpc crypto: chelsio - Fix indentation warning crypto: arm64/sha1-ce - get rid of literal pool crypto: arm64/sha2-ce - move the round constant table to .rodata section ...
2018-01-31Merge branch 'next-tpm' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security Pull tpm updates from James Morris: - reduce polling delays in tpm_tis - support retrieving TPM 2.0 Event Log through EFI before ExitBootServices - replace tpm-rng.c with a hwrng device managed by the driver for each TPM device - TPM resource manager synthesizes TPM_RC_COMMAND_CODE response instead of returning -EINVAL for unknown TPM commands. This makes user space more sound. - CLKRUN fixes: * Keep #CLKRUN disable through the entier TPM command/response flow * Check whether #CLKRUN is enabled before disabling and enabling it again because enabling it breaks PS/2 devices on a system where it is disabled * 'next-tpm' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: tpm: remove unused variables tpm: remove unused data fields from I2C and OF device ID tables tpm: only attempt to disable the LPC CLKRUN if is already enabled tpm: follow coding style for variable declaration in tpm_tis_core_init() tpm: delete the TPM_TIS_CLK_ENABLE flag tpm: Update MAINTAINERS for Jason Gunthorpe tpm: Keep CLKRUN enabled throughout the duration of transmit_cmd() tpm_tis: Move ilb_base_addr to tpm_tis_data tpm2-cmd: allow more attempts for selftest execution tpm: return a TPM_RC_COMMAND_CODE response if command is not implemented tpm: Move Linux RNG connection to hwrng tpm: use struct tpm_chip for tpm_chip_find_get() tpm: parse TPM event logs based on EFI table efi: call get_event_log before ExitBootServices tpm: add event log format version tpm: rename event log provider files tpm: move tpm_eventlog.h outside of drivers folder tpm: use tpm_msleep() value as max delay tpm: reduce tpm polling delay in tpm_tis_core tpm: move wait_for_tpm_stat() to respective driver files
2018-01-31Merge tag 'for-v4.16' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply Pull power supply and reset updates from Sebastian Reichel: - bq27xxx: add bq27521 support - drop unused imx-snvs-poweroff driver - improve axp288 driver - misc fixes * tag 'for-v4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (32 commits) power: supply: max17042_battery: Always fall back to default platform-data power: supply: max17042_battery: Check battery current for status when supplied MAINTAINERS: Add AXP288 PMIC entry power: supply: axp288_fuel_gauge: Do not register our psy on (some) HDMI sticks power: supply: axp288_fuel_gauge: Optimize get_current() power: supply: axp288_fuel_gauge: Rework get_status() power: reset: account for const type of of_device_id.data power: supply: account for const type of of_device_id.data bq24190: Simplify code in property_is_writeable power: supply: axp288_fuel_gauge: Get iio-channels once during boot power: supply: axp288_charger: Properly stop work on probe-error / remove power: supply: axp288_charger: Simplify extcon cable handling power: supply: axp288_charger: Use the right property for the input current limit power: supply: axp288_charger: Pick lower input current limit not higher power: supply: axp288_charger: Do not cache input current limit value power: supply: axp288_charger: Remove no longer needed locking power: supply: axp288_charger: Use regmap_update_bits to set the input limits power: supply: axp288_charger: Cleanup some double empty lines power: supply: axp288_charger: Remove charger-enabled state tracking power: supply: axp288_charger: Add missing newlines to some messages ...
2018-01-31Merge tag 'gpio-v4.16-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO updates from Linus Walleij: "The is the bulk of GPIO changes for the v4.16 kernel cycle. It is pretty calm this time around I think. I even got time to get to things like starting to clean up header includes. Core changes: - Disallow open drain and open source flags to be set simultaneously. This doesn't make electrical sense, and would the hardware actually respond to this setting, the result would be short circuit. - ACPI GPIO has a new core infrastructure for handling quirks. The quirks are there to deal with broken ACPI tables centrally instead of pushing the work to individual drivers. In the world of BIOS writers, the ACPI tables are perfect. Until they find a mistake in it. When such a mistake is found, we can patch it with a quirk. It should never happen, the problem is that it happens. So we accomodate for it. - Several documentation updates. - Revert the patch setting up initial direction state from reading the device. This was causing bad things for drivers that can't read status on all its pins. It is only affecting debugfs information quality. - Label descriptors with the device name if no explicit label is passed in. - Pave the ground for transitioning SPI and regulators to use GPIO descriptors by implementing some quirks in the device tree GPIO parsing code. New drivers: - New driver for the Access PCIe IDIO 24 family. Other: - Major refactorings and improvements to the GPIO mockup driver used for test and verification. - Moved the AXP209 driver over to pin control since it gained a pin control back-end. These patches will appear (with the same hashes) in the pin control pull request as well. - Convert the onewire GPIO driver w1-gpio to use descriptors. This is merged here since the W1 maintainers send very few pull requests and he ACKed it. - Start to clean up driver headers using <linux/gpio.h> to just use <linux/gpio/driver.h> as appropriate" * tag 'gpio-v4.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (103 commits) gpio: Timestamp events in hardirq handler gpio: Fix kernel stack leak to userspace gpio: Fix a documentation spelling mistake gpio: Documentation update gpiolib: remove redundant initialization of pointer desc gpio: of: Fix NPE from OF flags gpio: stmpe: Delete an unnecessary variable initialisation in stmpe_gpio_probe() gpio: stmpe: Move an assignment in stmpe_gpio_probe() gpio: stmpe: Improve a size determination in stmpe_gpio_probe() gpio: stmpe: Use seq_putc() in stmpe_dbg_show() gpio: No NULL owner gpio: stmpe: i2c transfer are forbiden in atomic context gpio: davinci: Include proper header gpio: da905x: Include proper header gpio: cs5535: Include proper header gpio: crystalcove: Include proper header gpio: bt8xx: Include proper header gpio: bcm-kona: Include proper header gpio: arizona: Include proper header gpio: amd8111: Include proper header ...
2018-01-31Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds
Pull RDMA subsystem updates from Jason Gunthorpe: "Overall this cycle did not have any major excitement, and did not require any shared branch with netdev. Lots of driver updates, particularly of the scale-up and performance variety. The largest body of core work was Parav's patches fixing and restructing some of the core code to make way for future RDMA containerization. Summary: - misc small driver fixups to bnxt_re/hfi1/qib/hns/ocrdma/rdmavt/vmw_pvrdma/nes - several major feature adds to bnxt_re driver: SRIOV VF RoCE support, HugePages support, extended hardware stats support, and SRQ support - a notable number of fixes to the i40iw driver from debugging scale up testing - more work to enable the new hip08 chip in the hns driver - misc small ULP fixups to srp/srpt//ipoib - preparation for srp initiator and target to support the RDMA-CM protocol for connections - add RDMA-CM support to srp initiator, srp target is still a WIP - fixes for a couple of places where ipoib could spam the dmesg log - fix encode/decode of FDR/EDR data rates in the core - many patches from Parav with ongoing work to clean up inconsistencies and bugs in RoCE support around the rdma_cm - mlx5 driver support for the userspace features 'thread domain', 'wallclock timestamps' and 'DV Direct Connected transport'. Support for the firmware dual port rocee capability - core support for more than 32 rdma devices in the char dev allocation - kernel doc updates from Randy Dunlap - new netlink uAPI for inspecting RDMA objects similar in spirit to 'ss' - one minor change to the kobject code acked by Greg KH" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (259 commits) RDMA/nldev: Provide detailed QP information RDMA/nldev: Provide global resource utilization RDMA/core: Add resource tracking for create and destroy PDs RDMA/core: Add resource tracking for create and destroy CQs RDMA/core: Add resource tracking for create and destroy QPs RDMA/restrack: Add general infrastructure to track RDMA resources RDMA/core: Save kernel caller name when creating PD and CQ objects RDMA/core: Use the MODNAME instead of the function name for pd callers RDMA: Move enum ib_cq_creation_flags to uapi headers IB/rxe: Change RDMA_RXE kconfig to use select IB/qib: remove qib_keys.c IB/mthca: remove mthca_user.h RDMA/cm: Fix access to uninitialized variable RDMA/cma: Use existing netif_is_bond_master function IB/core: Avoid SGID attributes query while converting GID from OPA to IB RDMA/mlx5: Avoid memory leak in case of XRCD dealloc failure IB/umad: Fix use of unprotected device pointer IB/iser: Combine substrings for three messages IB/iser: Delete an unnecessary variable initialisation in iser_send_data_out() IB/iser: Delete an error message for a failed memory allocation in iser_send_data_out() ...
2018-01-31Merge tag 'dma-mapping-4.16' of git://git.infradead.org/users/hch/dma-mappingLinus Torvalds
Pull dma mapping updates from Christoph Hellwig: "Except for a runtime warning fix from Christian this is all about consolidation of the generic no-IOMMU code, a well as the glue code for swiotlb. All the code is based on the x86 implementation with hooks to allow all architectures that aren't cache coherent to use it. The x86 conversion itself has been deferred because the x86 maintainers were a little busy in the last months" * tag 'dma-mapping-4.16' of git://git.infradead.org/users/hch/dma-mapping: (57 commits) MAINTAINERS: add the iommu list for swiotlb and xen-swiotlb arm64: use swiotlb_alloc and swiotlb_free arm64: replace ZONE_DMA with ZONE_DMA32 mips: use swiotlb_{alloc,free} mips/netlogic: remove swiotlb support tile: use generic swiotlb_ops tile: replace ZONE_DMA with ZONE_DMA32 unicore32: use generic swiotlb_ops ia64: remove an ifdef around the content of pci-dma.c ia64: clean up swiotlb support ia64: use generic swiotlb_ops ia64: replace ZONE_DMA with ZONE_DMA32 swiotlb: remove various exports swiotlb: refactor coherent buffer allocation swiotlb: refactor coherent buffer freeing swiotlb: wire up ->dma_supported in swiotlb_dma_ops swiotlb: add common swiotlb_map_ops swiotlb: rename swiotlb_free to swiotlb_exit x86: rename swiotlb_dma_ops powerpc: rename swiotlb_dma_ops ...
2018-01-31platform/x86: Move Mellanox platform hotplug driver to platform/mellanoxVadim Pasternak
In preparation for making the hotplug driver build for different architectures, move mlxcpld-hotplug.c to platform/mellanox and the header to include/linux/platform_data as mlxreg.h to reflect the new interface changes to come. Replace references to CPLD with REG throughout the files, consistent with the new name. Signed-off-by: Vadim Pasternak <vadimp@mellanox.com> Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com> [dvhart: update copyright, rewrite commit message] Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
2018-01-31Merge remote-tracking branch 'lorenzo/pci/cadence' into nextBjorn Helgaas
* lorenzo/pci/cadence: PCI: cadence: Add EndPoint Controller driver for Cadence PCIe controller dt-bindings: PCI: cadence: Add DT bindings for Cadence PCIe endpoint controller PCI: endpoint: Fix EPF device name to support multi-function devices PCI: endpoint: Add the function number as argument to EPC ops PCI: cadence: Add host driver for Cadence PCIe controller dt-bindings: PCI: cadence: Add DT bindings for Cadence PCIe host controller PCI: Add vendor ID for Cadence PCI: Add generic function to probe PCI host controllers PCI: generic: fix missing call of pci_free_resource_list() PCI: OF: Add generic function to parse and allocate PCI resources PCI: Regroup all PCI related entries into drivers/pci/Makefile Conflicts: drivers/pci/of.c include/linux/pci.h
2018-01-31PCI: cadence: Add EndPoint Controller driver for Cadence PCIe controllerCyrille Pitchen
This patch adds support to the Cadence PCIe controller in endpoint mode. Since pieces of source code are shared with the host driver (Root Complex mode), we create a new directory under drivers/pci dedicated to the Cadence PCIe controller. The common code is placed into drivers/pci/cadence/pcie-cadence.c and used by both the host and endpoint controller drivers. Signed-off-by: Cyrille Pitchen <cyrille.pitchen@free-electrons.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2018-01-31PCI: cadence: Add host driver for Cadence PCIe controllerCyrille Pitchen
This patch adds support to the Cadence PCIe controller in host mode. Signed-off-by: Cyrille Pitchen <cyrille.pitchen@free-electrons.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2018-01-31MAINTAINERS: update KVM/s390 maintainersCornelia Huck
As I have neither too much time nor access to the architecture documentation anymore, let's switch my status from maintainer to reviewer. Janosch will step in as second maintainer. Acked-by: Janosch Frank <frankja@linux.vnet.ibm.com> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2018-01-31MAINTAINERS: add Halil as additional vfio-ccw maintainerCornelia Huck
Acked-by: Janosch Frank <frankja@linux.vnet.ibm.com> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Halil Pasic <pasic@linux.vnet.ibm.com> Acked-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2018-01-31MAINTAINERS: add David as a reviewer for KVM/s390Cornelia Huck
Acked-by: Janosch Frank <frankja@linux.vnet.ibm.com> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: David Hildenbrand <david@redhat.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2018-01-30Merge tag 'arm64-upstream' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 updates from Catalin Marinas: "The main theme of this pull request is security covering variants 2 and 3 for arm64. I expect to send additional patches next week covering an improved firmware interface (requires firmware changes) for variant 2 and way for KPTI to be disabled on unaffected CPUs (Cavium's ThunderX doesn't work properly with KPTI enabled because of a hardware erratum). Summary: - Security mitigations: - variant 2: invalidate the branch predictor with a call to secure firmware - variant 3: implement KPTI for arm64 - 52-bit physical address support for arm64 (ARMv8.2) - arm64 support for RAS (firmware first only) and SDEI (software delegated exception interface; allows firmware to inject a RAS error into the OS) - perf support for the ARM DynamIQ Shared Unit PMU - CPUID and HWCAP bits updated for new floating point multiplication instructions in ARMv8.4 - remove some virtual memory layout printks during boot - fix initial page table creation to cope with larger than 32M kernel images when 16K pages are enabled" * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (104 commits) arm64: Fix TTBR + PAN + 52-bit PA logic in cpu_do_switch_mm arm64: Turn on KPTI only on CPUs that need it arm64: Branch predictor hardening for Cavium ThunderX2 arm64: Run enable method for errata work arounds on late CPUs arm64: Move BP hardening to check_and_switch_context arm64: mm: ignore memory above supported physical address size arm64: kpti: Fix the interaction between ASID switching and software PAN KVM: arm64: Emulate RAS error registers and set HCR_EL2's TERR & TEA KVM: arm64: Handle RAS SErrors from EL2 on guest exit KVM: arm64: Handle RAS SErrors from EL1 on guest exit KVM: arm64: Save ESR_EL2 on guest SError KVM: arm64: Save/Restore guest DISR_EL1 KVM: arm64: Set an impdef ESR for Virtual-SError using VSESR_EL2. KVM: arm/arm64: mask/unmask daif around VHE guests arm64: kernel: Prepare for a DISR user arm64: Unconditionally enable IESB on exception entry/return for firmware-first arm64: kernel: Survive corrected RAS errors notified by SError arm64: cpufeature: Detect CPU RAS Extentions arm64: sysreg: Move to use definitions for all the SCTLR bits arm64: cpufeature: __this_cpu_has_cap() shouldn't stop early ...
2018-01-30Merge branch 'perf-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf updates from Ingo Molnar: "Kernel side changes: - Clean up the x86 instruction decoder (Masami Hiramatsu) - Add new uprobes optimization for PUSH instructions on x86 (Yonghong Song) - Add MSR_IA32_THERM_STATUS to the MSR events (Stephane Eranian) - Fix misc bugs, update documentation, plus various cleanups (Jiri Olsa) There's a large number of tooling side improvements: - Intel-PT/BTS improvements (Adrian Hunter) - Numerous 'perf trace' improvements (Arnaldo Carvalho de Melo) - Introduce an errno code to string facility (Hendrik Brueckner) - Various build system improvements (Jiri Olsa) - Add support for CoreSight trace decoding by making the perf tools use the external openCSD (Mathieu Poirier, Tor Jeremiassen) - Add ARM Statistical Profiling Extensions (SPE) support (Kim Phillips) - libtraceevent updates (Steven Rostedt) - Intel vendor event JSON updates (Andi Kleen) - Introduce 'perf report --mmaps' and 'perf report --tasks' to show info present in 'perf.data' (Jiri Olsa, Arnaldo Carvalho de Melo) - Add infrastructure to record first and last sample time to the perf.data file header, so that when processing all samples in a 'perf record' session, such as when doing build-id processing, or when specifically requesting that that info be recorded, use that in 'perf report --time', that also got support for percent slices in addition to absolute ones. I.e. now it is possible to ask for the samples in the 10%-20% time slice of a perf.data file (Jin Yao) - Allow system wide 'perf stat --per-thread', sorting the result (Jin Yao) E.g.: [root@jouet ~]# perf stat --per-thread --metrics IPC ^C Performance counter stats for 'system wide': make-22229 23,012,094,032 inst_retired.any # 0.8 IPC cc1-22419 692,027,497 inst_retired.any # 0.8 IPC gcc-22418 328,231,855 inst_retired.any # 0.9 IPC cc1-22509 220,853,647 inst_retired.any # 0.8 IPC gcc-22486 199,874,810 inst_retired.any # 1.0 IPC as-22466 177,896,365 inst_retired.any # 0.9 IPC cc1-22465 150,732,374 inst_retired.any # 0.8 IPC gcc-22508 112,555,593 inst_retired.any # 0.9 IPC cc1-22487 108,964,079 inst_retired.any # 0.7 IPC qemu-system-x86-2697 21,330,550 inst_retired.any # 0.3 IPC systemd-journal-551 20,642,951 inst_retired.any # 0.4 IPC docker-containe-17651 9,552,892 inst_retired.any # 0.5 IPC dockerd-current-9809 7,528,586 inst_retired.any # 0.5 IPC make-22153 12,504,194,380 inst_retired.any # 0.8 IPC python2-22429 12,081,290,954 inst_retired.any # 0.8 IPC <SNIP> python2-22429 15,026,328,103 cpu_clk_unhalted.thread cc1-22419 826,660,193 cpu_clk_unhalted.thread gcc-22418 365,321,295 cpu_clk_unhalted.thread cc1-22509 279,169,362 cpu_clk_unhalted.thread gcc-22486 210,156,950 cpu_clk_unhalted.thread <SNIP> 5.638075538 seconds time elapsed [root@jouet ~]# - Improve shell auto-completion of perf events (Jin Yao) - 'perf probe' improvements (Masami Hiramatsu) - Improve PMU infrastructure to support amp64's ThunderX2 implementation defined core events (Ganapatrao Kulkarni) - Various annotation related improvements and fixes (Thomas Richter) - Clarify usage of 'overwrite' and 'backward' in the evlist/mmap code, removing the 'overwrite' parameter from several functions as it was always used it as 'false' (Wang Nan) - Fix/improve 'perf record' reverse recording support (Wang Nan) - Improve command line options documentation (Sihyeon Jang) - Optimize sample parsing for ordering events, where we don't need to parse all the PERF_SAMPLE_ bits, just the ones leading to the timestamp needed to reorder events (Jiri Olsa) - Generalize the annotation code to support other source information besides objdump/DWARF obtained ones, starting with python scripts, that will is slated to be merged soon (Jiri Olsa) - ... and a lot more that I failed to list, see the shortlog and changelog for details" * 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (262 commits) perf trace beauty flock: Move to separate object file perf evlist: Remove fcntl.h from evlist.h perf trace beauty futex: Beautify FUTEX_BITSET_MATCH_ANY perf trace: Do not print from time delta for interrupted syscall lines perf trace: Add --print-sample perf bpf: Remove misplaced __maybe_unused attribute MAINTAINERS: Adding entry for CoreSight trace decoding perf tools: Add mechanic to synthesise CoreSight trace packets perf tools: Add full support for CoreSight trace decoding pert tools: Add queue management functionality perf tools: Add functionality to communicate with the openCSD decoder perf tools: Add support for decoding CoreSight trace data perf tools: Add decoder mechanic to support dumping trace data perf tools: Add processing of coresight metadata perf tools: Add initial entry point for decoder CoreSight traces perf tools: Integrating the CoreSight decoding library perf vendor events intel: Update IvyTown files to V20 perf vendor events intel: Update IvyBridge files to V20 perf vendor events intel: Update BroadwellDE events to V7 perf vendor events intel: Update SkylakeX events to V1.06 ...
2018-01-30Merge branch 'core-rcu-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull RCU updates from Ingo Molnar: "The main RCU changes in this cycle were: - Updates to use cond_resched() instead of cond_resched_rcu_qs() where feasible (currently everywhere except in kernel/rcu and in kernel/torture.c). Also a couple of fixes to avoid sending IPIs to offline CPUs. - Updates to simplify RCU's dyntick-idle handling. - Updates to remove almost all uses of smp_read_barrier_depends() and read_barrier_depends(). - Torture-test updates. - Miscellaneous fixes" * 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (72 commits) torture: Save a line in stutter_wait(): while -> for torture: Eliminate torture_runnable and perf_runnable torture: Make stutter less vulnerable to compilers and races locking/locktorture: Fix num reader/writer corner cases locking/locktorture: Fix rwsem reader_delay torture: Place all torture-test modules in one MAINTAINERS group rcutorture/kvm-build.sh: Skip build directory check rcutorture: Simplify functions.sh include path rcutorture: Simplify logging rcutorture/kvm-recheck-*: Improve result directory readability check rcutorture/kvm.sh: Support execution from any directory rcutorture/kvm.sh: Use consistent help text for --qemu-args rcutorture/kvm.sh: Remove unused variable, `alldone` rcutorture: Remove unused script, config2frag.sh rcutorture/configinit: Fix build directory error message rcutorture: Preempt RCU-preempt readers more vigorously torture: Reduce #ifdefs for preempt_schedule() rcu: Remove have_rcu_nocb_mask from tree_plugin.h rcu: Add comment giving debug strategy for double call_rcu() tracing, rcu: Hide trace event rcu_nocb_wake when not used ...
2018-01-30Merge tag v4.15 of ↵Jason Gunthorpe
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git To resolve conflicts in: drivers/infiniband/hw/mlx5/main.c drivers/infiniband/hw/mlx5/qp.c From patches merged into the -rc cycle. The conflict resolution matches what linux-next has been carrying. Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-01-29Merge branch 'irq-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq updates from Thomas Gleixner: "A rather small set of irq updates this time: - removal of the old and now obsolete irq domain debugging code - the new Goldfish PIC driver - the usual pile of small fixes and updates" * 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqdomain: Kill CONFIG_IRQ_DOMAIN_DEBUG irq/work: Improve the flag definitions irqchip/gic-v3: Fix the driver probe() fail due to disabled GICC entry irqchip/irq-goldfish-pic: Add Goldfish PIC driver dt-bindings/goldfish-pic: Add device tree binding for Goldfish PIC driver irqchip/ompic: fix return value check in ompic_of_init() dt-bindings/bcm283x: Define polarity of per-cpu interrupts irqchip/irq-bcm2836: Add support for DT interrupt polarity dt-bindings/bcm2836-l1-intc: Add interrupt polarity support
2018-01-29Merge tag 'm68k-for-v4.16-tag1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k Pull m68k updates from Geert Uytterhoeven: - first part of an overhaul of the NuBus subsystem, to bring it up to modern driver model standards - a race condition fix for Mac - defconfig updates * tag 'm68k-for-v4.16-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: MAINTAINERS: Add NuBus subsystem entry m68k/mac: Fix race conditions in OSS interrupt dispatch nubus: Add support for the driver model nubus: Add expansion_type values for various Mac models nubus: Adopt standard linked list implementation nubus: Rename struct nubus_dev nubus: Rework /proc/bus/nubus/s/ implementation nubus: Generalize block resource handling nubus: Clean up whitespace nubus: Remove redundant code nubus: Call proc_mkdir() not more than once per slot directory nubus: Validate slot resource IDs nubus: Fix log spam nubus: Use static functions where possible nubus: Fix up header split nubus: Avoid array underflow and overflow m68k/defconfig: Update defconfigs for v4.15-rc1
2018-01-29Merge tag 'edac_for_4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bpLinus Torvalds
Pull EDAC updates from Borislav Petkov: - new EDAC driver for some TI SOCs (Tero Kristo) - small cleanups * tag 'edac_for_4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp: EDAC, mv64x60: Fix an error handling path EDAC, ti: Add support for TI keystone and DRA7xx EDAC EDAC, octeon: Fix an uninitialized variable warning
2018-01-29Merge tag 'regulator-v4.16' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Pull regulator updates from Mark Brown: "This is a quiet release in terms of code volume but a fairly big one in terms of framework changes - we've got one long awaited feature in the form of runtime configuration of suspend and the start of coupled regulator support too: - Support for modifying the voltage and enable configuration devices will have in suspend, contributed by Chunyan Zhang. - Support for the Spreadtrum SC2731, contributed by Erick Chen. - The start of changes to support coupled regulators from Maciej Purski, the rest of the series should arrive for v4.17" * tag 'regulator-v4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: regulator: Fix build error regulator: core: Refactor regulator_list_voltage() regulator: core: Move of_find_regulator_by_node() to of_regulator.c regulator: add PM suspend and resume hooks regulator: empty the old suspend functions regulator: leave one item to record whether regulator is enabled regulator: make regulator voltage be an array to support more states regulator: added support for suspend states regulator: qcom_spmi: Use regmap helpers for enable/disable/is_enabled callback regulator: sc2731: Fix defines for SC2731_WR_UNLOCK and SC2731_PWR_WR_PROT_VALUE regulator: fix incorrect indentation of two assignment statements regulator: sc2731: Add regulator driver to support Spreadtrum SC2731 PMIC regulator: Add Spreadtrum SC2731 regulator documentation regulator: Update code examples in documentation MAINTAINERS: regulator: Add Documentation/power/regulator/ regulator: tps65218: Add NULL test for devm_kzalloc call regulator: tps65218: Remove unused enum tps65218_regulators
2018-01-29Merge tag 'mtd/for-4.16' of git://git.infradead.org/linux-mtdLinus Torvalds
Pull MTD updates from Boris Brezillon: "MTD core changes: - Rework core functions to avoid duplicating generic checks in NAND/OneNAND sub-layers - Update the MAINTAINERS entry to reflect the fact that MTD maintainers now use a single git tree MTD driver changes: - CFI: use macros instead of inline functions to limit stack usage and make KASAN happy NAND core changes: - Fix NAND_CMD_NONE handling in nand_command[_lp]() hooks - Introduce the ->exec_op() infrastructure - Rework NAND buffers handling - Fix ECC requirements for K9F4G08U0D - Fix nand_do_read_oob() to return the number of bitflips - Mark K9F1G08U0E as not supporting subpage writes NAND driver changes: - MTK: Rework the driver to support new IP versions - OMAP OneNAND: Full rework to use new APIs (libgpio, dmaengine) and fix DT support - Marvell: Add a new driver to replace the pxa3xx one SPI NOR core changes: - Add support to new ISSI and Cypress/Spansion memory parts. - Fix support of Micron memories by checking error bits in the FSR. - Fix update of block-protection bits by reading back the SR. - Restore the internal state of the SPI flash memory when removing the device. SPI NOR driver changes: - Maintenance for Freescale, Intel and Metiatek drivers. - Add support of the direct access mode for the Cadence QSPI controller" * tag 'mtd/for-4.16' of git://git.infradead.org/linux-mtd: (93 commits) mtd: nand: sunxi: Fix ECC strength choice mtd: nand: gpmi: Fix subpage reads mtd: nand: Fix build issues due to an anonymous union mtd: nand: marvell: Fix missing memory allocation modifier mtd: nand: marvell: remove redundant variable 'oob_len' mtd: nand: marvell: fix spelling mistake: "suceed"-> "succeed" mtd: onenand: omap2: Remove redundant dev_err call in omap2_onenand_probe() mtd: Remove duplicate checks on mtd_oob_ops parameter mtd: Fallback to ->_read/write_oob() when ->_read/write() is missing mtd: mtdpart: Make ECC stat handling consistent mtd: onenand: omap2: print resource using %pR format string mtd: mtk-nor: modify functions' name more generally mtd: onenand: samsung: remove incorrect __iomem annotation MAINTAINERS: Add entry for Marvell NAND controller driver ARM: OMAP2+: Remove gpmc-onenand mtd: onenand: omap2: Configure driver from DT mtd: onenand: omap2: Decouple DMA enabling from INT pin availability mtd: onenand: omap2: Do not make delay for GPIO OMAP3 specific mtd: onenand: omap2: Convert to use dmaengine for memcpy mtd: onenand: omap2: Unify OMAP2 and OMAP3 DMA implementation ...
2018-01-29Merge tag 'acpi-4.16-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI updates from Rafael Wysocki: "The majority of this is an update of the ACPICA kernel code to upstream revision 20171215 with a cosmetic change and a maintainers information update on top of it. The rest is mostly some minor fixes and cleanups in the ACPI drivers and cleanups to initialization on x86. Specifics: - Update the ACPICA kernel code to upstream revision 20171215 including: * Support for ACPI 6.0A changes in the NFIT table (Bob Moore) * Local 64-bit divide in string conversions (Bob Moore) * Fix for a regression in acpi_evaluate_object_type() (Bob Moore) * Fixes for memory leaks during package object resolution (Bob Moore) * Deployment of safe version of strncpy() (Bob Moore) * Debug and messaging updates (Bob Moore) * Support for PDTT, SDEV, TPM2 tables in iASL and tools (Bob Moore) * Null pointer dereference avoidance in Op and cleanups (Colin Ian King) * Fix for memory leak from building prefixed pathname (Erik Schmauss) * Coding style fixes, disassembler and compiler updates (Hanjun Guo, Erik Schmauss) * Additional PPTT flags from ACPI 6.2 (Jeremy Linton) * Fix for an off-by-one error in acpi_get_timer_duration() (Jung-uk Kim) * Infinite loop detection timeout and utilities cleanups (Lv Zheng) * Windows 10 version 1607 and 1703 OSI strings (Mario Limonciello) - Update ACPICA information in MAINTAINERS to reflect the current status of ACPICA maintenance and rename a local variable in one function to match the corresponding upstream code (Rafael Wysocki) - Clean up ACPI-related initialization on x86 (Andy Shevchenko) - Add support for Intel Merrifield to the ACPI GPIO code (Andy Shevchenko) - Clean up ACPI PMIC drivers (Andy Shevchenko, Arvind Yadav) - Fix the ACPI Generic Event Device (GED) driver to free IRQs on shutdown and clean up the PCI IRQ Link driver (Sinan Kaya) - Make the GHES code call into the AER driver on all errors and clean up the ACPI APEI code (Colin Ian King, Tyler Baicar) - Make the IA64 ACPI NUMA code parse all SRAT entries (Ganapatrao Kulkarni) - Add a lid switch blacklist to the ACPI button driver and make it print extra debug messages on lid events (Hans de Goede) - Add quirks for Asus GL502VSK and UX305LA to the ACPI battery driver and clean it up somewhat (Bjørn Mork, Kai-Heng Feng) - Add device link for CHT SD card dependency on I2C to the ACPI LPSS (Intel SoCs) driver and make it avoid creating platform device objects for devices without MMIO resources (Adrian Hunter, Hans de Goede) - Fix the ACPI GPE mask kernel command line parameter handling (Prarit Bhargava) - Fix the handling of (incorrectly exposed) backlight interfaces without LCD (Hans de Goede) - Fix the usage of debugfs_create_*() in the ACPI EC driver (Geert Uytterhoeven)" * tag 'acpi-4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (62 commits) ACPI/PCI: pci_link: reduce verbosity when IRQ is enabled ACPI / LPSS: Do not instiate platform_dev for devs without MMIO resources ACPI / PMIC: Convert to use builtin_platform_driver() macro ACPI / x86: boot: Propagate error code in acpi_gsi_to_irq() ACPICA: Update version to 20171215 ACPICA: trivial style fix, no functional change ACPICA: Fix a couple memory leaks during package object resolution ACPICA: Recognize the Windows 10 version 1607 and 1703 OSI strings ACPICA: DT compiler: prevent error if optional field at the end of table is not present ACPICA: Rename a global variable, no functional change ACPICA: Create and deploy safe version of strncpy ACPICA: Cleanup the global variables and update comments ACPICA: Debugger: fix slight indentation issue ACPICA: Fix a regression in the acpi_evaluate_object_type() interface ACPICA: Update for a few debug output statements ACPICA: Debug output, no functional change ACPI: EC: Fix debugfs_create_*() usage ACPI / video: Default lcd_only to true on Win8-ready and newer machines ACPI / x86: boot: Don't setup SCI on HW-reduced platforms ACPI / x86: boot: Use INVALID_ACPI_IRQ instead of 0 for acpi_sci_override_gsi ...
2018-01-29Merge tag 'pm-4.16-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management updates from Rafael Wysocki: "This includes some infrastructure changes in the PM core, mostly related to integration between runtime PM and system-wide suspend and hibernation, plus some driver changes depending on them and fixes for issues in that area which have become quite apparent recently. Also included are changes making more x86-based systems use the Low Power Sleep S0 _DSM interface by default, which turned out to be necessary to handle power button wakeups from suspend-to-idle on Surface Pro3. On the cpufreq front we have fixes and cleanups in the core, some new hardware support, driver updates and the removal of some unused code from the CPU cooling thermal driver. Apart from this, the Operating Performance Points (OPP) framework is prepared to be used with power domains in the future and there is a usual bunch of assorted fixes and cleanups. Specifics: - Define a PM driver flag allowing drivers to request that their devices be left in suspend after system-wide transitions to the working state if possible and add support for it to the PCI bus type and the ACPI PM domain (Rafael Wysocki). - Make the PM core carry out optimizations for devices with driver PM flags set in some cases and make a few drivers set those flags (Rafael Wysocki). - Fix and clean up wrapper routines allowing runtime PM device callbacks to be re-used for system-wide PM, change the generic power domains (genpd) framework to stop using those routines incorrectly and fix up a driver depending on that behavior of genpd (Rafael Wysocki, Ulf Hansson, Geert Uytterhoeven). - Fix and clean up the PM core's device wakeup framework and re-factor system-wide PM core code related to device wakeup (Rafael Wysocki, Ulf Hansson, Brian Norris). - Make more x86-based systems use the Low Power Sleep S0 _DSM interface by default (to fix power button wakeup from suspend-to-idle on Surface Pro3) and add a kernel command line switch to tell it to ignore the system sleep blacklist in the ACPI core (Rafael Wysocki). - Fix a race condition related to cpufreq governor module removal and clean up the governor management code in the cpufreq core (Rafael Wysocki). - Drop the unused generic code related to the handling of the static power energy usage model in the CPU cooling thermal driver along with the corresponding documentation (Viresh Kumar). - Add mt2712 support to the Mediatek cpufreq driver (Andrew-sh Cheng). - Add a new operating point to the imx6ul and imx6q cpufreq drivers and switch the latter to using clk_bulk_get() (Anson Huang, Dong Aisheng). - Add support for multiple regulators to the TI cpufreq driver along with a new DT binding related to that and clean up that driver somewhat (Dave Gerlach). - Fix a powernv cpufreq driver regression leading to incorrect CPU frequency reporting, fix that driver to deal with non-continguous P-states correctly and clean it up (Gautham Shenoy, Shilpasri Bhat). - Add support for frequency scaling on Armada 37xx SoCs through the generic DT cpufreq driver (Gregory CLEMENT). - Fix error code paths in the mvebu cpufreq driver (Gregory CLEMENT). - Fix a transition delay setting regression in the longhaul cpufreq driver (Viresh Kumar). - Add Skylake X (server) support to the intel_pstate cpufreq driver and clean up that driver somewhat (Srinivas Pandruvada). - Clean up the cpufreq statistics collection code (Viresh Kumar). - Drop cluster terminology and dependency on physical_package_id from the PSCI driver and drop dependency on arm_big_little from the SCPI cpufreq driver (Sudeep Holla). - Add support for system-wide suspend and resume to the RAPL power capping driver and drop a redundant semicolon from it (Zhen Han, Luis de Bethencourt). - Make SPI domain validation (in the SCSI SPI transport driver) and system-wide suspend mutually exclusive as they rely on the same underlying mechanism and cannot be carried out at the same time (Bart Van Assche). - Fix the computation of the amount of memory to preallocate in the hibernation core and clean up one function in there (Rainer Fiebig, Kyungsik Lee). - Prepare the Operating Performance Points (OPP) framework for being used with power domains and clean up one function in it (Viresh Kumar, Wei Yongjun). - Clean up the generic sysfs interface for device PM (Andy Shevchenko). - Fix several minor issues in power management frameworks and clean them up a bit (Arvind Yadav, Bjorn Andersson, Geert Uytterhoeven, Gustavo Silva, Julia Lawall, Luis de Bethencourt, Paul Gortmaker, Sergey Senozhatsky, gaurav jindal). - Make it easier to disable PM via Kconfig (Mark Brown). - Clean up the cpupower and intel_pstate_tracer utilities (Doug Smythies, Laura Abbott)" * tag 'pm-4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (89 commits) PCI / PM: Remove spurious semicolon cpufreq: scpi: remove arm_big_little dependency drivers: psci: remove cluster terminology and dependency on physical_package_id powercap: intel_rapl: Fix trailing semicolon dmaengine: rcar-dmac: Make DMAC reinit during system resume explicit PM / runtime: Allow no callbacks in pm_runtime_force_suspend|resume() PM / hibernate: Drop unused parameter of enough_swap PM / runtime: Check ignore_children in pm_runtime_need_not_resume() PM / runtime: Rework pm_runtime_force_suspend/resume() PM / genpd: Stop/start devices without pm_runtime_force_suspend/resume() cpufreq: powernv: Dont assume distinct pstate values for nominal and pmin cpufreq: intel_pstate: Add Skylake servers support cpufreq: intel_pstate: Replace bxt_funcs with core_funcs platform/x86: surfacepro3: Support for wakeup from suspend-to-idle ACPI / PM: Use Low Power S0 Idle on more systems PM / wakeup: Print warn if device gets enabled as wakeup source during sleep PM / domains: Don't skip driver's ->suspend|resume_noirq() callbacks PM / core: Propagate wakeup_path status flag in __device_suspend_late() PM / core: Re-structure code for clearing the direct_complete flag powercap: add suspend and resume mechanism for SOC power limit ...
2018-01-29Merge tag 'sound-4.16-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound updates from Takashi Iwai: "The major changes in the core API side in this cycle are the still on-going ASoC componentization works. Other than that, only few small changes such as 20bit PCM format support are found. Meanwhile the rest majority of changes are for ASoC drivers: - Large cleanups of some of the TI CODEC drivers - Continued work on Intel ASoC stuff for new quirks, ACPI GPIO handling, Kconfigs and lots of cleanups - Refactoring of the Freescale SSI driver, as preliminary work for the upcoming changes - Work on ST DFSDM driver, including the required IIO patches - New drivers for Allwinner A83T, Maxim MAX89373, SocioNext UiniPhier EVEA Tempo Semiconductor TSCS42xx and TI PCM816x, TAS5722 and TAS6424 devices - Removal of dead codes for SN95031 and board drivers Last but not least, a few HD-audio and USB-audio quirks are included as usual, too" * tag 'sound-4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (303 commits) ALSA: hda - Reduce the suspend time consumption for ALC256 ASoC: use seq_file to dump the contents of dai_list,platform_list and codec_list ASoC: soc-core: add missing EXPORT_SYMBOL_GPL() for snd_soc_rtdcom_lookup IIO: ADC: stm32-dfsdm: remove unused variable again ASoC: bcm2835: fix hw_params error when device is in prepared state ASoC: mxs-sgtl5000: Do not print error on probe deferral ASoC: sgtl5000: Do not print error on probe deferral ASoC: Intel: remove select on non-existing SND_SOC_INTEL_COMMON ALSA: usb-audio: Support changing input on Sound Blaster E1 ASoC: Intel: remove second duplicated assignment to pointer 'res' ALSA: hda/realtek - update ALC215 depop optimize ALSA: hda/realtek - Support headset mode for ALC215/ALC285/ALC289 ALSA: pcm: Fix trailing semicolon ASoC: add Component level .read/.write ASoC: cx20442: fix regression by adding back .read/.write ASoC: uda1380: fix regression by adding back .read/.write ASoC: tlv320dac33: fix regression by adding back .read/.write ALSA: hda - Use IS_REACHABLE() for dependency on input IIO: ADC: stm32-dfsdm: fix static check warning IIO: ADC: stm32-dfsdm: code optimization ...
2018-01-29Merge tag 'nand/for-4.16' of git://git.infradead.org/linux-mtd into mtd/nextBoris Brezillon
Pull NAND changes from Boris Brezillon: " Core changes: * Fix NAND_CMD_NONE handling in nand_command[_lp]() hooks * Introduce the ->exec_op() infrastructure * Rework NAND buffers handling * Fix ECC requirements for K9F4G08U0D * Fix nand_do_read_oob() to return the number of bitflips * Mark K9F1G08U0E as not supporting subpage writes Driver changes: * MTK: Rework the driver to support new IP versions * OMAP OneNAND: Full rework to use new APIs (libgpio, dmaengine) and fix DT support * Marvell: Add a new driver to replace the pxa3xx one "
2018-01-28MAINTAINERS: NTB: Update contact infoAllen Hubbe
I am no longer employed by Dell EMC. For the purposes of NTB driver development and maintenance, please contact me via my personal email. Signed-off-by: Allen Hubbe <allenbh@gmail.com> Signed-off-by: Allen Hubbe <Allen.Hubbe@emc.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2018-01-28Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Thomas Gleixner: "A set of small fixes for 4.15: - Fix vmapped stack synchronization on systems with 4-level paging and a large amount of memory caused by a missing 5-level folding which made the pgd synchronization logic to fail and causing double faults. - Add a missing sanity check in the vmalloc_fault() logic on 5-level paging systems. - Bring back protection against accessing a freed initrd in the microcode loader which was lost by a wrong merge conflict resolution. - Extend the Broadwell micro code loading sanity check. - Add a missing ENDPROC annotation in ftrace assembly code which makes ORC unhappy. - Prevent loading the AMD power module on !AMD platforms. The load itself is uncritical, but an unload attempt results in a kernel crash. - Update Peter Anvins role in the MAINTAINERS file" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/ftrace: Add one more ENDPROC annotation x86: Mark hpa as a "Designated Reviewer" for the time being x86/mm/64: Tighten up vmalloc_fault() sanity checks on 5-level kernels x86/mm/64: Fix vmapped stack syncing on very-large-memory 4-level systems x86/microcode: Fix again accessing initrd after having been freed x86/microcode/intel: Extend BDW late-loading further with LLC size check perf/x86/amd/power: Do not load AMD power module on !AMD platforms
2018-01-27x86: Mark hpa as a "Designated Reviewer" for the time beingH. Peter Anvin
Due to some unfortunate events, I have not been directly involved in the x86 kernel patch flow for a while now. I have also not been able to ramp back up by now like I had hoped to, and after reviewing what I will need to work on both internally at Intel and elsewhere in the near term, it is clear that I am not going to be able to ramp back up until late 2018 at the very earliest. It is not acceptable to not recognize that this load is currently taken by Ingo and Thomas without my direct participation, so I mark myself as R: (designated reviewer) rather than M: (maintainer) until further notice. This is in fact recognizing the de facto situation for the past few years. I have obviously no intention of going away, and I will do everything within my power to improve Linux on x86 and x86 for Linux. This, however, puts credit where it is due and reflects a change of focus. This patch also removes stale entries for portions of the x86 architecture which have not been maintained separately from arch/x86 for a long time. If there is a reason to re-introduce them then that can happen later. Signed-off-by: H. Peter Anvin <h.peter.anvin@intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Bruce Schlobohm <bruce.schlobohm@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20180125195934.5253-1-hpa@zytor.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-01-27ocxl: add MAINTAINERS entryFrederic Barrat
Signed-off-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com> Signed-off-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-01-26Merge tag 'riscv-for-linus-4.15-maintainers' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux Pull RISC-V update from Palmer Dabbelt: "RISC-V: We have a new mailing list and git repo! Sorry to send something essentially as late as possible (Friday after an rc9), but we managed to get a mailing list for the RISC-V Linux port. We've been using patches@groups.riscv.org for a while, but that list has some problems (it's Google Groups and it's shared over all RISC-V software projects). The new infaread.org list is much better. We just got it on Wednesday but I used it a bit on Thursday to shake out all the configuration problems and it appears to be in working order. When I updated the mailing list I noticed that the MAINTAINERS file was pointing to our github repo, but now that we have a kernel.org repo I'd like to point to that instead so I changed that as well. We'll be centralizing all RISC-V Linux related development here as that seems to be the saner way to go about it. I can understand if it's too late to get this into 4.15, but given that it's not a code change I was hoping it'd still be OK. It would be nice to have the new mailing list and git repo in the release tarballs so when people start to find bugs they'll get to the right place" * tag 'riscv-for-linus-4.15-maintainers' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux: Update the RISC-V MAINTAINERS file