summaryrefslogtreecommitdiff
path: root/MAINTAINERS
AgeCommit message (Collapse)Author
2020-01-27Merge tag 'timers-core-2020-01-27' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer updates from Thomas Gleixner: "The timekeeping and timers departement provides: - Time namespace support: If a container migrates from one host to another then it expects that clocks based on MONOTONIC and BOOTTIME are not subject to disruption. Due to different boot time and non-suspended runtime these clocks can differ significantly on two hosts, in the worst case time goes backwards which is a violation of the POSIX requirements. The time namespace addresses this problem. It allows to set offsets for clock MONOTONIC and BOOTTIME once after creation and before tasks are associated with the namespace. These offsets are taken into account by timers and timekeeping including the VDSO. Offsets for wall clock based clocks (REALTIME/TAI) are not provided by this mechanism. While in theory possible, the overhead and code complexity would be immense and not justified by the esoteric potential use cases which were discussed at Plumbers '18. The overhead for tasks in the root namespace (ie where host time offsets = 0) is in the noise and great effort was made to ensure that especially in the VDSO. If time namespace is disabled in the kernel configuration the code is compiled out. Kudos to Andrei Vagin and Dmitry Sofanov who implemented this feature and kept on for more than a year addressing review comments, finding better solutions. A pleasant experience. - Overhaul of the alarmtimer device dependency handling to ensure that the init/suspend/resume ordering is correct. - A new clocksource/event driver for Microchip PIT64 - Suspend/resume support for the Hyper-V clocksource - The usual pile of fixes, updates and improvements mostly in the driver code" * tag 'timers-core-2020-01-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (71 commits) alarmtimer: Make alarmtimer_get_rtcdev() a stub when CONFIG_RTC_CLASS=n alarmtimer: Use wakeup source from alarmtimer platform device alarmtimer: Make alarmtimer platform device child of RTC device alarmtimer: Update alarmtimer_get_rtcdev() docs to reflect reality hrtimer: Add missing sparse annotation for __run_timer() lib/vdso: Only read hrtimer_res when needed in __cvdso_clock_getres() MIPS: vdso: Define BUILD_VDSO32 when building a 32bit kernel clocksource/drivers/hyper-v: Set TSC clocksource as default w/ InvariantTSC clocksource/drivers/hyper-v: Untangle stimers and timesync from clocksources clocksource/drivers/timer-microchip-pit64b: Fix sparse warning clocksource/drivers/exynos_mct: Rename Exynos to lowercase clocksource/drivers/timer-ti-dm: Fix uninitialized pointer access clocksource/drivers/timer-ti-dm: Switch to platform_get_irq clocksource/drivers/timer-ti-dm: Convert to devm_platform_ioremap_resource clocksource/drivers/em_sti: Fix variable declaration in em_sti_probe clocksource/drivers/em_sti: Convert to devm_platform_ioremap_resource clocksource/drivers/bcm2835_timer: Fix memory leak of timer clocksource/drivers/cadence-ttc: Use ttc driver as platform driver clocksource/drivers/timer-microchip-pit64b: Add Microchip PIT64B support clocksource/drivers/hyper-v: Reserve PAGE_SIZE space for tsc page ...
2020-01-27Merge tag 'selinux-pr-20200127' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux Pull SELinux update from Paul Moore: "This is one of the bigger SELinux pull requests in recent years with 28 patches. Everything is passing our test suite and the highlights are below: - Mark CONFIG_SECURITY_SELINUX_DISABLE as deprecated. We're some time away from actually attempting to remove this in the kernel, but the only distro we know that still uses it (Fedora) is working on moving away from this so we want to at least let people know we are planning to remove it. - Reorder the SELinux hooks to help prevent bad things when SELinux is disabled at runtime. The proper fix is to remove the CONFIG_SECURITY_SELINUX_DISABLE functionality (see above) and just take care of it at boot time (e.g. "selinux=0"). - Add SELinux controls for the kernel lockdown functionality, introducing a new SELinux class/permissions: "lockdown { integrity confidentiality }". - Add a SELinux control for move_mount(2) that reuses the "file { mounton }" permission. - Improvements to the SELinux security label data store lookup functions to speed up translations between our internal label representations and the visible string labels (both directions). - Revisit a previous fix related to SELinux inode auditing and permission caching and do it correctly this time. - Fix the SELinux access decision cache to cleanup properly on error. In some extreme cases this could limit the cache size and result in a decrease in performance. - Enable SELinux per-file labeling for binderfs. - The SELinux initialized and disabled flags were wrapped with accessors to ensure they are accessed correctly. - Mark several key SELinux structures with __randomize_layout. - Changes to the LSM build configuration to only build security/lsm_audit.c when needed. - Changes to the SELinux build configuration to only build the IB object cache when CONFIG_SECURITY_INFINIBAND is enabled. - Move a number of single-caller functions into their callers. - Documentation fixes (/selinux -> /sys/fs/selinux). - A handful of cleanup patches that aren't worth mentioning on their own, the individual descriptions have plenty of detail" * tag 'selinux-pr-20200127' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux: (28 commits) selinux: fix regression introduced by move_mount(2) syscall selinux: do not allocate ancillary buffer on first load selinux: remove redundant allocation and helper functions selinux: remove redundant selinux_nlmsg_perm selinux: fix wrong buffer types in policydb.c selinux: reorder hooks to make runtime disable less broken selinux: treat atomic flags more carefully selinux: make default_noexec read-only after init selinux: move ibpkeys code under CONFIG_SECURITY_INFINIBAND. selinux: remove redundant msg_msg_alloc_security Documentation,selinux: fix references to old selinuxfs mount point selinux: deprecate disabling SELinux and runtime selinux: allow per-file labelling for binderfs selinuxfs: use scnprintf to get real length for inode selinux: remove set but not used variable 'sidtab' selinux: ensure the policy has been loaded before reading the sidtab stats selinux: ensure we cleanup the internal AVC counters on error in avc_update() selinux: randomize layout of key structures selinux: clean up selinux_enabled/disabled/enforcing_boot selinux: remove unnecessary selinux cred request ...
2020-01-27Merge tag 'acpi-5.6-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI updates from Rafael Wysocki: "These update the ACPICA code in the kernel to the most recent upstream revision (20200110), add new hardware support to a handful of ACPI drivers, make the ACPI fan driver expose power states information for fans, add some more quirks, fix bugs and clean up assorted things. Specifics: - Update the ACPICA code in the kernel to upstream revision 20200110 including: - Update of copyright notices to 2020 (Bob Moore). - Dispatcher fix to always generate buffer objects for the ASL create_field() operator (Maximilian Luz). - Debugger cleanup (Colin Ian King). - Disassembler change to create buffer fields in ACPI_PARSE_LOAD_PASS1 (Erik Kaneda). - UNIX line ending support for non-windows builds in acpisrc (Erik Kaneda). - Update the list of ACPICA maintainers (Rafael Wysocki). - Add Intel Tiger Lake ACPI device IDs to the ACPI DPTF, ACPI fan, int340x_thermal and intel-hid drivers (Gayatri Kammela). - Make the ACPI fan driver create additional sysfs attributes to expose power states information for fans (Srinivas Pandruvada). - Fix up the ACPI battery driver to deal with unexpected battery capacity information in a better way (Hans de Goede). - Add ACPI backlight quirks for Lenovo E41-25/45 and MSI MS-7721 boards (Aaron Ma, Hans de Goede). - Add DMI quirk for Razer Blade Stealth 13 late 2019 lid switch to the ACPI button driver (Jason Ekstrand). - Drop TIMER_DEFERRABLE from the GHES polling mode timer function flags to make it run precisely at the configured time (Bhaskar Upadhaya). - Fix race condition related to the reference counting of query handlers in the ACPI EC driver (Rafael Wysocki). - Fix ACPI tools build issue (Zhengyuan Liu). - Replace dma_request_slave_channel() with dma_request_chan() in the firmware guide documentation for ACPI (Peter Ujfalusi). - Fix typo in a comment and clean up function parameter data type inconsistencies (Kacper Piwiński, Tian Tao)" * tag 'acpi-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (25 commits) ACPICA: Update version to 20200110 ACPICA: All acpica: Update copyrights to 2020 Including tool signons. apei/ghes: Do not delay GHES polling ACPI: button: Add DMI quirk for Razer Blade Stealth 13 late 2019 lid switch ACPI: PPTT: Consistently use unsigned int as parameter type ACPI: EC: Reference count query handlers under lock ACPICA: Update the list of maintainers ACPICA: Update version to 20191213 ACPICA: Dispatcher: always generate buffer objects for ASL create_field() operator ACPICA: acpisrc: add unix line ending support for non-windows build ACPICA: Disassembler: create buffer fields in ACPI_PARSE_LOAD_PASS1 ACPICA: debugger: fix spelling mistake "adress" -> "address" ACPI: video: Do not export a non working backlight interface on MSI MS-7721 boards docs: firmware-guide: ACPI: Replace dma_request_slave_channel() with dma_request_chan() thermal: int340x_thermal: Add Tiger Lake ACPI device IDs platform/x86: intel-hid: Add Tiger Lake ACPI device ID ACPI: fan: Add Tiger Lake ACPI device ID ACPI: DPTF: Add Tiger Lake ACPI device IDs ACPI: fan: Expose fan performance state information tools/power/acpi: fix compilation error ...
2020-01-27Merge tag 'pm-5.6-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management updates from Rafael Wysocki: "These add ACPI support to the intel_idle driver along with an admin guide document for it, add support for CPR (Core Power Reduction) to the AVS (Adaptive Voltage Scaling) subsystem, add new hardware support in a few places, add some new sysfs attributes, debugfs files and tracepoints, fix bugs and clean up a bunch of things all over. Specifics: - Update the ACPI processor driver in order to export acpi_processor_evaluate_cst() to the code outside of it, add ACPI support to the intel_idle driver based on that and clean up that driver somewhat (Rafael Wysocki). - Add an admin guide document for the intel_idle driver (Rafael Wysocki). - Clean up cpuidle core and drivers, enable compilation testing for some of them (Benjamin Gaignard, Krzysztof Kozlowski, Rafael Wysocki, Yangtao Li). - Fix reference counting of OPP (operating performance points) table structures (Viresh Kumar). - Add support for CPR (Core Power Reduction) to the AVS (Adaptive Voltage Scaling) subsystem (Niklas Cassel, Colin Ian King, YueHaibing). - Add support for TigerLake Mobile and JasperLake to the Intel RAPL power capping driver (Zhang Rui). - Update cpufreq drivers: - Add i.MX8MP support to imx-cpufreq-dt (Anson Huang). - Fix usage of a macro in loongson2_cpufreq (Alexandre Oliva). - Fix cpufreq policy reference counting issues in s3c and brcmstb-avs (chenqiwu). - Fix ACPI table reference counting issue and HiSilicon quirk handling in the CPPC driver (Hanjun Guo). - Clean up spelling mistake in intel_pstate (Harry Pan). - Convert the kirkwood and tegra186 drivers to using devm_platform_ioremap_resource() (Yangtao Li). - Update devfreq core: - Add 'name' sysfs attribute for devfreq devices (Chanwoo Choi). - Clean up the handing of transition statistics and allow them to be reset by writing 0 to the 'trans_stat' devfreq device attribute in sysfs (Kamil Konieczny). - Add 'devfreq_summary' to debugfs (Chanwoo Choi). - Clean up kerneldoc comments and Kconfig indentation (Krzysztof Kozlowski, Randy Dunlap). - Update devfreq drivers: - Add dynamic scaling for the imx8m DDR controller and clean up imx8m-ddrc (Leonard Crestez, YueHaibing). - Fix DT node reference counting and nitialization error code path in rk3399_dmc and add COMPILE_TEST and HAVE_ARM_SMCCC dependency for it (Chanwoo Choi, Yangtao Li). - Fix DT node reference counting in rockchip-dfi and make it use devm_platform_ioremap_resource() (Yangtao Li). - Fix excessive stack usage in exynos-ppmu (Arnd Bergmann). - Fix initialization error code paths in exynos-bus (Yangtao Li). - Clean up exynos-bus and exynos somewhat (Artur Świgoń, Krzysztof Kozlowski). - Add tracepoints for tracking usage_count updates unrelated to status changes in PM-runtime (Michał Mirosław). - Add sysfs attribute to control the "sync on suspend" behavior during system-wide suspend (Jonas Meurer). - Switch system-wide suspend tests over to 64-bit time (Alexandre Belloni). - Make wakeup sources statistics in debugfs cover deleted ones which used to be the case some time ago (zhuguangqing). - Clean up computations carried out during hibernation, update messages related to hibernation and fix a spelling mistake in one of them (Wen Yang, Luigi Semenzato, Colin Ian King). - Add mailmap entry for maintainer e-mail address that has not been functional for several years (Rafael Wysocki)" * tag 'pm-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (83 commits) cpufreq: loongson2_cpufreq: adjust cpufreq uses of LOONGSON_CHIPCFG intel_idle: Clean up irtl_2_usec() intel_idle: Move 3 functions closer to their callers intel_idle: Annotate initialization code and data structures intel_idle: Move and clean up intel_idle_cpuidle_devices_uninit() intel_idle: Rearrange intel_idle_cpuidle_driver_init() intel_idle: Clean up NULL pointer check in intel_idle_init() intel_idle: Fold intel_idle_probe() into intel_idle_init() intel_idle: Eliminate __setup_broadcast_timer() cpuidle: fix cpuidle_find_deepest_state() kerneldoc warnings cpuidle: sysfs: fix warnings when compiling with W=1 cpuidle: coupled: fix warnings when compiling with W=1 cpufreq: brcmstb-avs: fix imbalance of cpufreq policy refcount PM: suspend: Add sysfs attribute to control the "sync on suspend" behavior PM / devfreq: Add debugfs support with devfreq_summary file Documentation: admin-guide: PM: Add intel_idle document cpuidle: arm: Enable compile testing for some of drivers PM-runtime: add tracepoints for usage_count changes cpufreq: intel_pstate: fix spelling mistake: "Whethet" -> "Whether" PM: hibernate: fix spelling mistake "shapshot" -> "snapshot" ...
2020-01-27Merge tag 'regulator-v5.6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Pull regulator updates from Mark Brown: "Hardly anything going on in the core this time around with the regulator API and pretty quiet on the driver front: - An API for comparing regulators, useful for devices that need to check if supply voltages exactly match rather than just nominally match. - Conversion of several DT bindings to YAML format. - Conversion of I2C drivers to probe_new(). - New drivers for Monolithic MPQ7920 and MP8859, and Rohm BD71828" * tag 'regulator-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (34 commits) dt-bindings: regulator: add document bindings for mpq7920 regulator: core: Fix exported symbols to the exported GPL version regulator: mpq7920: Fix incorrect defines regulator: vqmmc-ipq4019: Fix platform_no_drv_owner.cocci warnings regulator: vctrl-regulator: Avoid deadlock getting and setting the voltage regulator fix for "regulator: core: Add regulator_is_equal() helper" regulator: core: Add regulator_is_equal() helper regulator: mpq7920: Convert to use .probe_new regulator: mpq7920: Remove unneeded fields from struct mpq7920_regulator_info regulator: vqmmc-ipq4019: Trivial clean up regulator: vqmmc-ipq4019: Remove ipq4019_regulator_remove regulator: bindings: Drop document bindings for mpq7920 dt-bindings: Drop entry for Monolithic Power System, MPS regulator: bd718x7: Simplify the code by removing struct bd718xx_pmic_inits regulator: add IPQ4019 SDHCI VQMMC LDO driver regulator: Convert i2c drivers to use .probe_new regulator: mpq7920: Check the correct variable in mpq7920_regulator_register() regulator: mpq7920: Fix Woverflow warning on conversion regulator: mp8859: tidy up white space in probe regulator: mpq7920: add mpq7920 regulator driver ...
2020-01-27Merge tag 'spi-v5.6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi updates from Mark Brown: "Not much going on in the core for SPI this time but a reasonable amount of change in the drivers: - Removal of dmal_request_slave_channel() from Peter Ujfalusi. - More conversions of drivers to GPIO descriptors from Linus Walleij. - A big rework of the sh-msiof driver from Geert Uytterhoeven moving it over to the generic native chipselect support. - DMA support for the uniphier driver from Kunihiko Hayashi. - New driver support for HiSilcon v3xx SPI NOR controllers from John Garry" * tag 'spi-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (52 commits) dt-binding: spi: add NPCM PSPI reset binding spi: pxa2xx: Avoid touching SSCR0_SSE on MMP2 spi: spi-fsl-qspi: Ensure width is respected in spi-mem operations spi: npcm-pspi: modify reset support spi: npcm-pspi: improve spi transfer performance spi: spi-ti-qspi: fix warning spi: npcm-pspi: fix 16 bit send and receive support spi: pxa2xx: Add support for Intel Comet Lake PCH-V spi: fsl: simplify error path in of_fsl_spi_probe() spi: fsl-lpspi: fix only one cs-gpio working spi: spi-ti-qspi: optimize byte-transfers spi: spi-ti-qspi: support large flash devices spi: spi-qcom-qspi: Use device managed memory for clk_bulk_data MAINTAINERS: Add a maintainer for the HiSilicon v3xx SFC driver spi: Add HiSilicon v3xx SPI NOR flash controller driver dt-bindings: spi_atmel: add microchip,sam9x60-spi spi: bcm2835: Raise maximum number of slaves to 4 spi: sh-msiof: Do not redefine STR while compile testing spi: rspi: Add support for GPIO chip selects spi: rspi: Add support for multiple native chip selects ...
2020-01-27Merge tag 'dmaengine-5.6-rc1' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds
Pull dmaengine updates from Vinod Koul: "This time we have a bunch of core changes to support dynamic channels, hotplug of controllers, new apis for metadata ops etc along with new drivers for Intel data accelerators, TI K3 UDMA, PLX DMA engine and hisilicon Kunpeng DMA engine. Also usual assorted updates to drivers. Core: - Support for dynamic channels - Removal of various slave wrappers - Make few slave request APIs as private to dmaengine - Symlinks between channels and slaves - Support for hotplug of controllers - Support for metadata_ops for dma_async_tx_descriptor - Reporting DMA cached data amount - Virtual dma channel locking updates New drivers/device/feature support support: - Driver for Intel data accelerators - Driver for TI K3 UDMA - Driver for PLX DMA engine - Driver for hisilicon Kunpeng DMA engine - Support for eDMA support for QorIQ LS1028A in fsl edma driver - Support for cyclic dma in sun4i driver - Support for X1830 in JZ4780 driver" * tag 'dmaengine-5.6-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (62 commits) dmaengine: Create symlinks between DMA channels and slaves dmaengine: hisilicon: Add Kunpeng DMA engine support dmaengine: idxd: add char driver to expose submission portal to userland dmaengine: idxd: connect idxd to dmaengine subsystem dmaengine: idxd: add descriptor manipulation routines dmaengine: idxd: add sysfs ABI for idxd driver dmaengine: idxd: add configuration component of driver dmaengine: idxd: Init and probe for Intel data accelerators dmaengine: add support to dynamic register/unregister of channels dmaengine: break out channel registration x86/asm: add iosubmit_cmds512() based on MOVDIR64B CPU instruction dmaengine: ti: k3-udma: fix spelling mistake "limted" -> "limited" dmaengine: s3c24xx-dma: fix spelling mistake "to" -> "too" dmaengine: Move dma_get_{,any_}slave_channel() to private dmaengine.h dmaengine: Remove dma_request_slave_channel_compat() wrapper dmaengine: Remove dma_device_satisfies_mask() wrapper dt-bindings: fsl-imx-sdma: Add i.MX8MM/i.MX8MN/i.MX8MP compatible string dmaengine: zynqmp_dma: fix burst length configuration dmaengine: sun4i: Add support for cyclic requests with dedicated DMA dmaengine: fsl-qdma: fix duplicated argument to && ...
2020-01-27Merge tag 'platform-drivers-x86-v5.6-1' of ↵Linus Torvalds
git://git.infradead.org/linux-platform-drivers-x86 Pull x86 platform driver updates from Andy Shevchenko: - Enable thermal policy for ASUS TUF FX705DY/FX505DY - Support left round button on ASUS N56VB - Support new Mellanox platforms of basic class VMOD0009 and VMOD0010 - Intel Comet Lake, Tiger Lake and Elkhart Lake support in the PMC driver - Big clean-up to Intel PMC core, PMC IPC and SCU IPC drivers - Touchscreen support for the PiPO W11 tablet * tag 'platform-drivers-x86-v5.6-1' of git://git.infradead.org/linux-platform-drivers-x86: (64 commits) platform/x86: intel_pmc_ipc: Switch to use driver->dev_groups platform/x86: intel_pmc_ipc: Propagate error from kstrtoul() platform/x86: intel_pmc_ipc: Use octal permissions in sysfs attributes platform/x86: intel_pmc_ipc: Get rid of unnecessary includes platform/x86: intel_pmc_ipc: Drop ipc_data_readb() platform/x86: intel_pmc_ipc: Drop intel_pmc_gcr_read() and intel_pmc_gcr_write() platform/x86: intel_pmc_ipc: Make intel_pmc_ipc_raw_cmd() static platform/x86: intel_pmc_ipc: Make intel_pmc_ipc_simple_command() static platform/x86: intel_pmc_ipc: Make intel_pmc_gcr_update() static platform/x86: intel_scu_ipc: Reformat kernel-doc comments of exported functions platform/x86: intel_scu_ipc: Drop intel_scu_ipc_raw_command() platform/x86: intel_scu_ipc: Drop intel_scu_ipc_io[read|write][8|16]() platform/x86: intel_scu_ipc: Drop unused macros platform/x86: intel_scu_ipc: Drop unused prototype intel_scu_ipc_fw_update() platform/x86: intel_scu_ipc: Sleeping is fine when polling platform/x86: intel_scu_ipc: Drop intel_scu_ipc_i2c_cntrl() platform/x86: intel_scu_ipc: Remove Lincroft support platform/x86: intel_scu_ipc: Add constants for register offsets platform/x86: intel_scu_ipc: Fix interrupt support platform/x86: intel_scu_ipcutil: Remove default y from Kconfig ...
2020-01-27Merge tag 'mmc-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmcLinus Torvalds
Pull MMC updates from Ulf Hansson: "There are no updates for the MEMSTICK subsystem this time. But note that I am also carrying a patch from the pinctrl tree, which has been shared through an immutable branch. Summary: MMC core: - Convert to reasonable timeouts for all CMD6 commands (updates for BKOPS, CACHE_FLUSH and INAND_CMD38_ARG_EXT_CSD) for eMMC - Respect f_max clock rate at card initialization - Add gpiod_toggle_active_low() API - Consolidate slot-gpio code by using gpiod_toggle_active_low() MMC host: - Add pinctrl_select_default_state() API - Consolidate pintctrl code by using pinctrl_select_default_state() - mmci: Support any block sizes for SDIO for some variants - mmci: Enable reset control for stm32_sdmmc - mmc_spi: Toggle SPI_CS_HIGH polarity rather than hard-coding it - renesas_sdhi: Add support for the r8a77961 variant - renesas_sdhi: A few minor improvements - rockchip-dw-mshc: Add support for the rk3308 variant - sdhci: Enable support for external DMA controllers - sdhci: Fixup error path when sending CMD12 - sdhci-brcmstb: Add support for 7216b0 variant - sdhci-brcmstb: Add support for command queuing (CQHCI) - sdhci-brcmstb: Add support for eMMC HS400ES mode - sdhci-msm: Add support for the sc7180 variant - sdhci-msm: Add support for command queuing (CQHCI) - sdhci-of-at91: Add support for the SAM9x60 variant - sdhci-of-at91: Improve support for tunings - sdhci-of-esdhc: A few fixups for some clock related issues - sdhci-omap: Add support for the am335x and the am437x variants - sdhci-omap: Improve support for erase operations - sdhci-omap: Add support for external DMA" * tag 'mmc-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (89 commits) mmc: core: Default to generic_cmd6_time as timeout in __mmc_switch() mmc: block: Use generic_cmd6_time when modifying INAND_CMD38_ARG_EXT_CSD mmc: core: Specify timeouts for BKOPS and CACHE_FLUSH for eMMC mmc: sdhci-cadence: remove unneeded 'inline' marker dt-bindings: mmc: rockchip-dw-mshc: add description for rk3308 dt-bindings: mmc: convert rockchip dw-mshc bindings to yaml dt-bindings: mmc: convert synopsys dw-mshc bindings to yaml mmc: sdhci-msm: Add CQHCI support for sdhci-msm mmc: sdhci: Let a vendor driver supply and update ADMA descriptor size mmc: sdhci-of-esdhc: fix serious issue clock is always disabled mmc: sdhci-of-esdhc: fix transfer mode register reading mmc: sdhci-brcmstb: Fix incorrect switch to HS mode mmc: sdhci-brcmstb: Add support for Command Queuing (CQE) mmc: sdhci-brcmstb: Add shutdown callback mmc: sdhci-brcmstb: Fix driver to defer on clk_get defer mmc: sdhci-brcmstb: Add ability to use HS400ES transfer mode dt-bindings: mmc: brcm,sdhci-brcmstb: Add support for 7216b0 mmc: core: limit probe clock frequency to configured f_max mmc: sdhci-milbeaut: Remove redundant platform_get_irq error message mmc: sdhci: fix an issue of mixing different types ...
2020-01-27Merge tag 'i3c/for-5.6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux Pull i3c updates from Boris Brezillon: "Core changes: - Make i3c_bus_set_mode() static Driver changes: - Add a per-SoC data_hold_delay property to the Cadence driver - Fix formatting issues in the 'CADENCE I3C MASTER IP' MAINTAINERS entry - Use devm_platform_ioremap_resource() where appropriate - Adjust DesignWare reattach logic" * tag 'i3c/for-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux: i3c: master: dw: reattach device on first available location of address table i3c: master: cdns: convert to devm_platform_ioremap_resource i3c: master: dw: convert to devm_platform_ioremap_resource MAINTAINERS: fix style in CADENCE I3C MASTER IP entry i3c: master: make i3c_bus_set_mode static i3c: master: cdns: add data hold delay support
2020-01-27Merge tag 'hwmon-for-v5.6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon updates from Guenter Roeck: "core: - Add support for enable attributes to hwmon core - Add intrusion templates pmbus: - Support for Infineon Multi-phase xdpe122 family controllers - Support for Intel IMVP9 and AMD 6.25mV modes - Support for vid mode detection per page bases - Detect if chip is write protected - Support for MAX20730, MAX20734, MAX20743, MAX20796, UCD90320, TPS53688 - Various improvements to ibm-cffps driver k10temp: - Support for additional temperature sensors as well as voltage and current telemetry for Zen CPUs w83627ehf: - Remove support for NCT6775, NCT6776 (they have their own driver) New drivers: - ADM1177 - MAX31730 - Driver for disk and solid state drives with temperature sensors Other: - pwm-fan: stop fan on shutdown" * tag 'hwmon-for-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (35 commits) hwmon: (k10temp) Display up to eight sets of CCD temperatures hwmon: (k10temp) Add debugfs support hwmon: (k10temp) Don't show temperature limits on Ryzen (Zen) CPUs hwmon: (k10temp) Show core and SoC current and voltages on Ryzen CPUs hwmon: (k10temp) Report temperatures per CPU die hmon: (k10temp) Convert to use devm_hwmon_device_register_with_info hwmon: (k10temp) Use bitops hwmon: (pwm-fan) stop fan on shutdown MAINTAINERS: add entry for ADM1177 driver dt-binding: hwmon: Add documentation for ADM1177 hwmon: (adm1177) Add ADM1177 Hot Swap Controller and Digital Power Monitor driver docs: hwmon: Include 'xdpe12284.rst' into docs hwmon: (pmbus) Add support for Infineon Multi-phase xdpe122 family controllers hwmon: (pmbus/tps53679) Extend device list supported by driver hwmon: (pmbus/core) Add support for Intel IMVP9 and AMD 6.25mV modes hwmon: (pmbus/core) Add support for vid mode detection per page bases hwmon: (pmbus/ibm-cffps) Prevent writing on_off_config with bad data hwmon: (w83627ehf) Remove set but not used variable 'fan4min' hwmon: Driver for disk and solid state drives with temperature sensors hwmon: (pmbus/ibm-cffps) Fix the LED behavior when turned off ...
2020-01-27MAINTAINERS: Add entry for Marvell OcteonTX2 Physical Function driverSunil Goutham
Added maintainers entry for Marvell OcteonTX2 SOC's physical function NIC driver. Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-27Documentation: net: octeontx2: Add RVU HW and drivers overviewSunil Goutham
Added high level overview of OcteonTx2 RVU HW and functionality of various drivers which will be upstreamed. Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-27Merge branches 'pm-core', 'powercap', 'pm-opp', 'pm-avs' and 'pm-misc'Rafael J. Wysocki
* pm-core: PM-runtime: add tracepoints for usage_count changes * powercap: powercap/intel_rapl: add support for JasperLake x86/cpu: Add Jasper Lake to Intel family powercap/intel_rapl: add support for TigerLake Mobile * pm-opp: opp: Replace list_kref with a local counter opp: Free static OPPs on errors while adding them * pm-avs: power: avs: qcom-cpr: remove duplicated include from qcom-cpr.c power: avs: fix uninitialized error return on failed cpr_read_fuse_uV() call power: avs: qcom-cpr: make cpr_get_opp_hz_for_req() static power: avs: qcom-cpr: remove set but unused variable power: avs: qcom-cpr: make sure that regmap is available power: avs: qcom-cpr: fix unsigned expression compared with zero power: avs: qcom-cpr: fix invalid printk specifier in debug print power: avs: Add support for CPR (Core Power Reduction) dt-bindings: power: avs: Add support for CPR (Core Power Reduction) * pm-misc: mailmap: Add entry for <rjw@sisk.pl>
2020-01-27Merge tag 'wireless-drivers-next-2020-01-26' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for v5.6 Second set of patches for v5.6. Nothing special standing out, smaller new features and fixes allover. Major changes: ar5523 * add support for SMCWUSBT-G2 USB device iwlwifi * support new versions of the FTM FW APIs * support new version of the beacon template FW API * print some extra information when the driver is loaded rtw88 * support wowlan feature for 8822c * add support for WIPHY_WOWLAN_NET_DETECT brcmfmac * add initial support for monitor mode qtnfmac * add module parameter to enable DFS offloading in firmware * add support for STA HE rates * add support for TWT responder and spatial reuse ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-27Merge branch 'acpica'Rafael J. Wysocki
* acpica: ACPICA: Update version to 20200110 ACPICA: All acpica: Update copyrights to 2020 Including tool signons. ACPICA: Update the list of maintainers ACPICA: Update version to 20191213 ACPICA: Dispatcher: always generate buffer objects for ASL create_field() operator ACPICA: acpisrc: add unix line ending support for non-windows build ACPICA: Disassembler: create buffer fields in ACPI_PARSE_LOAD_PASS1 ACPICA: debugger: fix spelling mistake "adress" -> "address"
2020-01-27thermal/drivers/sun8i: Add thermal driver for H6/H5/H3/A64/A83T/R40Yangtao Li
This patch adds the support for allwinner thermal sensor, within allwinner SoC. It will register sensors for thermal framework and use device tree to bind cooling device. Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Signed-off-by: Ondrej Jirman <megous@megous.com> Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Acked-by: Maxime Ripard <mripard@kernel.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20191219172823.1652600-2-anarsoul@gmail.com
2020-01-27thermal/drivers/cpu_cooling: Rename to cpufreq_coolingDaniel Lezcano
As we introduced the idle injection cooling device called cpuidle_cooling, let's be consistent and rename the cpu_cooling to cpufreq_cooling as this one mitigates with OPPs changes. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org> Link: https://lore.kernel.org/r/20191219225317.17158-3-daniel.lezcano@linaro.org
2020-01-27thermal/drivers/cpu_cooling: Introduce the cpu idle cooling driverDaniel Lezcano
The cpu idle cooling device offers a new method to cool down a CPU by injecting idle cycles at runtime. It has some similarities with the intel power clamp driver but it is actually designed to be more generic and relying on the idle injection powercap framework. The idle injection duration is fixed while the running duration is variable. That allows to have control on the device reactivity for the user experience. An idle state powering down the CPU or the cluster will allow to drop the static leakage, thus restoring the heat capacity of the SoC. It can be set with a trip point between the hot and the critical points, giving the opportunity to prevent a hard reset of the system when the cpufreq cooling fails to cool down the CPU. With more sophisticated boards having a per core sensor, the idle cooling device allows to cool down a single core without throttling the compute capacity of several cpus belonging to the same clock line, so it could be used in collaboration with the cpufreq cooling device. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Link: https://lore.kernel.org/r/20191219225317.17158-2-daniel.lezcano@linaro.org
2020-01-26MAINTAINERS: update for mwifiex driver maintainersGanapathi Bhat
Remove Nishant Sarmukadam from Maintainer list, as he is no longer working in NXP. Signed-off-by: Ganapathi Bhat <ganapathi.bhat@nxp.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2020-01-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller
Minor conflict in mlx5 because changes happened to code that has moved meanwhile. Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-25tipc: change maintainer email addressJon Maloy
Reflecting new realities. Signed-off-by: Jon Maloy <jmaloy@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-24Merge tag 'irqchip-5.6' of ↵Thomas Gleixner
git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/core Pull irqchip updates from Marc Zyngier: - Conversion of the SiFive PLIC to hierarchical domains - New SiFive GPIO irqchip driver - New Aspeed SCI irqchip driver - New NXP INTMUX irqchip driver - Additional support for the Meson A1 GPIO irqchip - First part of the GICv4.1 support - Assorted fixes
2020-01-24mptcp: add basic kselftest for mptcpFlorian Westphal
Add mptcp_connect tool: xmit two files back and forth between two processes, several net namespaces including some adding delays, losses and reordering. Wrapper script tests that data was transmitted without corruption. The "-c" command line option for mptcp_connect.sh is there for debugging: The script will use tcpdump to create one .pcap file per test case, named according to the namespaces, protocols, and connect address in use. For example, the first test case writes the capture to ns1-ns1-MPTCP-MPTCP-10.0.1.1.pcap. The stderr output from tcpdump is printed after the test completes to show tcpdump's "packets dropped by kernel" information. Also check that userspace can't create MPTCP sockets when mptcp.enabled sysctl is off. The "-b" option allows to tune/lower send buffer size. "-m mmap" can be used to test blocking io. Default is non-blocking io using read/write/poll. Will run automatically on "make kselftest". Note that the default timeout of 45 seconds is used even if there is a "settings" changing it to 450. 45 seconds should be enough in most cases but this depends on the machine running the tests. A fix to correctly read the "settings" file has been proposed upstream but not applied yet. It is not blocking the execution of these new tests but it would be nice to have it: https://patchwork.kernel.org/patch/11204935/ Co-developed-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Co-developed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Co-developed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Co-developed-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Christoph Paasch <cpaasch@apple.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-24mptcp: Add MPTCP socket stubsMat Martineau
Implements the infrastructure for MPTCP sockets. MPTCP sockets open one in-kernel TCP socket per subflow. These subflow sockets are only managed by the MPTCP socket that owns them and are not visible from userspace. This commit allows a userspace program to open an MPTCP socket with: sock = socket(AF_INET, SOCK_STREAM, IPPROTO_MPTCP); The resulting socket is simply a wrapper around a single regular TCP socket, without any of the MPTCP protocol implemented over the wire. Co-developed-by: Florian Westphal <fw@strlen.de> Signed-off-by: Florian Westphal <fw@strlen.de> Co-developed-by: Peter Krystad <peter.krystad@linux.intel.com> Signed-off-by: Peter Krystad <peter.krystad@linux.intel.com> Co-developed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Co-developed-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Christoph Paasch <cpaasch@apple.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-24dt-bindings: mmc: convert rockchip dw-mshc bindings to yamlJohan Jonker
Current dts files with 'dwmmc' nodes are manually verified. In order to automate this process rockchip-dw-mshc.txt has to be converted to yaml. In the new setup rockchip-dw-mshc.yaml will inherit properties from mmc-controller.yaml and synopsys-dw-mshc-common.yaml. 'dwmmc' will no longer be a valid name for a node and should be changed to 'mmc'. Signed-off-by: Johan Jonker <jbx6244@gmail.com> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20200116152230.29831-2-jbx6244@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-01-24dmaengine: idxd: Init and probe for Intel data acceleratorsDave Jiang
The idxd driver introduces the Intel Data Stream Accelerator [1] that will be available on future Intel Xeon CPUs. One of the kernel access point for the driver is through the dmaengine subsystem. It will initially provide the DMA copy service to the kernel. Some of the main functionality introduced with this accelerator are: shared virtual memory (SVM) support, and descriptor submission using Intel CPU instructions movdir64b and enqcmds. There will be additional accelerator devices that share the same driver with variations to capabilities. This commit introduces the probe and initialization component of the driver. [1]: https://software.intel.com/en-us/download/intel-data-streaming-accelerator-preliminary-architecture-specification Signed-off-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/157965023991.73301.6186843973135311580.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-01-23MAINTAINERS: add entry for ADM1177 driverBeniamin Bia
Add Beniamin Bia and Michael Hennerich as a maintainer for ADM1177 ADC. Signed-off-by: Beniamin Bia <beniamin.bia@analog.com> Link: https://lore.kernel.org/r/20200114112159.25998-3-beniamin.bia@analog.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-01-23dt-bindings: PCI: Convert generic host binding to DT schemaRob Herring
Convert the generic PCI host binding to DT schema. The derivative Juno, PLDA XpressRICH3-AXI, and Designware ECAM bindings all just vary in their compatible strings. The simplest way to convert those to schema is just add them into the common generic PCI host schema. The HiSilicon ECAM and Cavium ThunderX PEM bindings have an additional 'reg' entry, but are otherwise the same binding as well. Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Andrew Murray <andrew.murray@arm.com> Cc: Zhou Wang <wangzhou1@hisilicon.com> Cc: Will Deacon <will@kernel.org> Cc: David Daney <david.daney@cavium.com> Signed-off-by: Rob Herring <robh@kernel.org>
2020-01-23dt-bindings: PCI: Convert Arm Versatile binding to DT schemaRob Herring
Convert the Arm Versatile PCI host binding to a DT schema. Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Andrew Murray <andrew.murray@arm.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Rob Herring <robh@kernel.org>
2020-01-23MAINTAINERS: Replace Tien Hock Loh as Altera PIO maintainerOoi, Joyce
This patch is to replace Tien Hock Loh as Altera PIO maintainer as he has moved to a different role. Signed-off-by: Ooi, Joyce <joyce.ooi@intel.com> Link: https://lore.kernel.org/r/20200103170155.100743-1-joyce.ooi@intel.com Acked-by: Tien Hock Loh <tien.hock.loh@intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-01-23Merge tag 'intel-pinctrl-v5.6-1' of ↵Linus Walleij
git://git.kernel.org/pub/scm/linux/kernel/git/pinctrl/intel into devel intel-pinctrl for v5.6-1 * Tiger Lake appears to have _HID enumeration, thus driver has been updated * Coffee Lake-S has the same IP as Sunrisepoint, thus ID has been added * Baytrail has got more clean ups and bug fixes, such as direct IRQ handling * Lynxpoint GPIO has been converted to true pin control driver * The common driver now uses IRQ chip enumeration via GPIO chip The following is an automated git shortlog grouped by driver: baytrail: - Replace WARN with dev_info_once when setting direct-irq pin to output - Do not clear IRQ flags on direct-irq enabled pins - Reuse struct intel_pinctrl in the driver - Use local variable to keep device pointer - Keep pointer to struct device instead of its container - Use GPIO direction definitions - Move IRQ valid mask initialization to a dedicated callback - Group GPIO IRQ chip initialization - Allocate IRQ chip dynamic cherryview: - Use GPIO direction definitions intel: - Pass irqchip when adding gpiochip - Add GPIO <-> pin mapping ranges via callback - Share struct intel_pinctrl for wider use - Use GPIO direction definitions lynxpoint: - Update summary in the driver - Switch to pin control API - Add GPIO <-> pin mapping ranges via callback - Implement ->pin_dbg_show() - Add pin control operations - Reuse struct intel_pinctrl in the driver - Add pin control data structures - Implement intel_gpio_get_direction callback - Implement ->irq_ack() callback - Move ownership check to IRQ chip - Move lp_irq_type() closer to IRQ related routines - Move ->remove closer to ->probe() - Extract lp_gpio_acpi_use() for future use - Convert unsigned to unsigned int - Switch to memory mapped IO accessors - Keep pointer to struct device instead of its container - Relax GPIO request rules - Assume 2 bits for mode selector - Use standard pattern for memory allocation - Use %pR to print IO resource - Drop useless assignment - Correct amount of pins - Use raw_spinlock for locking - Move GPIO driver to pin controller folder sunrisepoint: - Add Coffee Lake-S ACPI ID - Add missing Interrupt Status register offset tigerlake: - Tiger Lake uses _HID enumeration
2020-01-23Merge tag 'wireless-drivers-2020-01-23' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers Kalle Valo says: ==================== wireless-drivers fixes for v5.5 Second set of fixes for v5.5. There are quite a few patches, especially on iwlwifi, due to me being on a long break. Libertas also has a security fix and mt76 a build fix. iwlwifi * don't send the PPAG command when PPAG is disabled, since it can cause problems * a few fixes for a HW bug * a fix for RS offload; * a fix for 3168 devices where the NVM tables where the wrong tables were being read * fix a couple of potential memory leaks in TXQ code * disable L0S states in all hardware since our hardware doesn't officially support them anymore (and older versions of the hardware had instability in these states) * remove lar_disable parameter since it has been causing issues for some people who erroneously disable it * force the debug monitor HW to stop also when debug is disabled, since it sometimes stays on and prevents low system power states * don't send IWL_MVM_RXQ_NSSN_SYNC notification due to DMA problems libertas * fix two buffer overflows mt76 * build fix related to CONFIG_MT76_LEDS * fix off by one in bitrates handling ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-23Merge branch 'spi-5.6' into spi-nextMark Brown
2020-01-23Merge branch 'regulator-5.6' into regulator-nextMark Brown
2020-01-23MAINTAINERS: Make Russell King designated reviewer of phylibAndrew Lunn
phylink and phylib are interconnected. It makes sense for phylib and phy driver patches to be also reviewed by the phylink maintainer. So add Russell King as a designed reviewer of phylib. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-22net: Add Jakub to MAINTAINERS for networking general.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net> Acked-by: Jakub Kicinski <kuba@kernel.org>
2020-01-22MAINTAINERS: Update my email addressAndrew Murray
I will lose access to my @arm.com email address next week, so let's update the MAINTAINERS file and map it correctly in .mailmap Signed-off-by: Andrew Murray <andrew.murray@arm.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2020-01-22Merge 5.5-rc7 into staging-nextGreg Kroah-Hartman
We want the staging fixes in here as well Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-21Merge 5.5-rc7 into usb-nextGreg Kroah-Hartman
We need the USB fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-20Merge tag 'arm-soc/for-5.6/maintainers' of ↵Olof Johansson
https://github.com/Broadcom/stblinux into arm/drivers This pull request contains Broadcom SoCs MAINTAINERS file updates for 5.6, please pull the following: - Nicolas adds an entry for the Broadcom STB PCIe Root Complex files for both BCM7xxx (actual STB SoCs) and BCM2711 (Raspberry Pi 4). * tag 'arm-soc/for-5.6/maintainers' of https://github.com/Broadcom/stblinux: MAINTAINERS: Add brcmstb PCIe controller entry Link: https://lore.kernel.org/r/20200118032935.1346-1-f.fainelli@gmail.com Signed-off-by: Olof Johansson <olof@lixom.net>
2020-01-20irqchip: Add Aspeed SCU interrupt controllerEddie James
The Aspeed SOCs provide some interrupts through the System Control Unit registers. Add an interrupt controller that provides these interrupts to the system. Signed-off-by: Eddie James <eajames@linux.ibm.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Link: https://lore.kernel.org/r/1579123790-6894-3-git-send-email-eajames@linux.ibm.com
2020-01-20dt-bindings: interrupt-controller: Add Aspeed SCU interrupt controllerEddie James
Document the Aspeed SCU interrupt controller and add an include file for the interrupts it provides. Signed-off-by: Eddie James <eajames@linux.ibm.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Rob Herring <robh@kernel.org> Acked-by: Andrew Jeffery <andrew@aj.id.au> Link: https://lore.kernel.org/r/1579123790-6894-2-git-send-email-eajames@linux.ibm.com
2020-01-20Backmerge v5.5-rc7 into drm-nextDave Airlie
msm needs 5.5-rc4, go to the latest. Signed-off-by: Dave Airlie <airlied@redhat.com>
2020-01-19Merge ra.kernel.org:/pub/scm/linux/kernel/git/netdev/netDavid S. Miller
2020-01-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds
Pull networking fixes from David Miller: 1) Fix non-blocking connect() in x25, from Martin Schiller. 2) Fix spurious decryption errors in kTLS, from Jakub Kicinski. 3) Netfilter use-after-free in mtype_destroy(), from Cong Wang. 4) Limit size of TSO packets properly in lan78xx driver, from Eric Dumazet. 5) r8152 probe needs an endpoint sanity check, from Johan Hovold. 6) Prevent looping in tcp_bpf_unhash() during sockmap/tls free, from John Fastabend. 7) hns3 needs short frames padded on transmit, from Yunsheng Lin. 8) Fix netfilter ICMP header corruption, from Eyal Birger. 9) Fix soft lockup when low on memory in hns3, from Yonglong Liu. 10) Fix NTUPLE firmware command failures in bnxt_en, from Michael Chan. 11) Fix memory leak in act_ctinfo, from Eric Dumazet. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (91 commits) cxgb4: reject overlapped queues in TC-MQPRIO offload cxgb4: fix Tx multi channel port rate limit net: sched: act_ctinfo: fix memory leak bnxt_en: Do not treat DSN (Digital Serial Number) read failure as fatal. bnxt_en: Fix ipv6 RFS filter matching logic. bnxt_en: Fix NTUPLE firmware command failures. net: systemport: Fixed queue mapping in internal ring map net: dsa: bcm_sf2: Configure IMP port for 2Gb/sec net: dsa: sja1105: Don't error out on disabled ports with no phy-mode net: phy: dp83867: Set FORCE_LINK_GOOD to default after reset net: hns: fix soft lockup when there is not enough memory net: avoid updating qdisc_xmit_lock_key in netdev_update_lockdep_key() net/sched: act_ife: initalize ife->metalist earlier netfilter: nat: fix ICMP header corruption on ICMP errors net: wan: lapbether.c: Use built-in RCU list checking netfilter: nf_tables: fix flowtable list del corruption netfilter: nf_tables: fix memory leak in nf_tables_parse_netdev_hooks() netfilter: nf_tables: remove WARN and add NLA_STRING upper limits netfilter: nft_tunnel: ERSPAN_VERSION must not be null netfilter: nft_tunnel: fix null-attribute check ...
2020-01-18open: introduce openat2(2) syscallAleksa Sarai
/* Background. */ For a very long time, extending openat(2) with new features has been incredibly frustrating. This stems from the fact that openat(2) is possibly the most famous counter-example to the mantra "don't silently accept garbage from userspace" -- it doesn't check whether unknown flags are present[1]. This means that (generally) the addition of new flags to openat(2) has been fraught with backwards-compatibility issues (O_TMPFILE has to be defined as __O_TMPFILE|O_DIRECTORY|[O_RDWR or O_WRONLY] to ensure old kernels gave errors, since it's insecure to silently ignore the flag[2]). All new security-related flags therefore have a tough road to being added to openat(2). Userspace also has a hard time figuring out whether a particular flag is supported on a particular kernel. While it is now possible with contemporary kernels (thanks to [3]), older kernels will expose unknown flag bits through fcntl(F_GETFL). Giving a clear -EINVAL during openat(2) time matches modern syscall designs and is far more fool-proof. In addition, the newly-added path resolution restriction LOOKUP flags (which we would like to expose to user-space) don't feel related to the pre-existing O_* flag set -- they affect all components of path lookup. We'd therefore like to add a new flag argument. Adding a new syscall allows us to finally fix the flag-ignoring problem, and we can make it extensible enough so that we will hopefully never need an openat3(2). /* Syscall Prototype. */ /* * open_how is an extensible structure (similar in interface to * clone3(2) or sched_setattr(2)). The size parameter must be set to * sizeof(struct open_how), to allow for future extensions. All future * extensions will be appended to open_how, with their zero value * acting as a no-op default. */ struct open_how { /* ... */ }; int openat2(int dfd, const char *pathname, struct open_how *how, size_t size); /* Description. */ The initial version of 'struct open_how' contains the following fields: flags Used to specify openat(2)-style flags. However, any unknown flag bits or otherwise incorrect flag combinations (like O_PATH|O_RDWR) will result in -EINVAL. In addition, this field is 64-bits wide to allow for more O_ flags than currently permitted with openat(2). mode The file mode for O_CREAT or O_TMPFILE. Must be set to zero if flags does not contain O_CREAT or O_TMPFILE. resolve Restrict path resolution (in contrast to O_* flags they affect all path components). The current set of flags are as follows (at the moment, all of the RESOLVE_ flags are implemented as just passing the corresponding LOOKUP_ flag). RESOLVE_NO_XDEV => LOOKUP_NO_XDEV RESOLVE_NO_SYMLINKS => LOOKUP_NO_SYMLINKS RESOLVE_NO_MAGICLINKS => LOOKUP_NO_MAGICLINKS RESOLVE_BENEATH => LOOKUP_BENEATH RESOLVE_IN_ROOT => LOOKUP_IN_ROOT open_how does not contain an embedded size field, because it is of little benefit (userspace can figure out the kernel open_how size at runtime fairly easily without it). It also only contains u64s (even though ->mode arguably should be a u16) to avoid having padding fields which are never used in the future. Note that as a result of the new how->flags handling, O_PATH|O_TMPFILE is no longer permitted for openat(2). As far as I can tell, this has always been a bug and appears to not be used by userspace (and I've not seen any problems on my machines by disallowing it). If it turns out this breaks something, we can special-case it and only permit it for openat(2) but not openat2(2). After input from Florian Weimer, the new open_how and flag definitions are inside a separate header from uapi/linux/fcntl.h, to avoid problems that glibc has with importing that header. /* Testing. */ In a follow-up patch there are over 200 selftests which ensure that this syscall has the correct semantics and will correctly handle several attack scenarios. In addition, I've written a userspace library[4] which provides convenient wrappers around openat2(RESOLVE_IN_ROOT) (this is necessary because no other syscalls support RESOLVE_IN_ROOT, and thus lots of care must be taken when using RESOLVE_IN_ROOT'd file descriptors with other syscalls). During the development of this patch, I've run numerous verification tests using libpathrs (showing that the API is reasonably usable by userspace). /* Future Work. */ Additional RESOLVE_ flags have been suggested during the review period. These can be easily implemented separately (such as blocking auto-mount during resolution). Furthermore, there are some other proposed changes to the openat(2) interface (the most obvious example is magic-link hardening[5]) which would be a good opportunity to add a way for userspace to restrict how O_PATH file descriptors can be re-opened. Another possible avenue of future work would be some kind of CHECK_FIELDS[6] flag which causes the kernel to indicate to userspace which openat2(2) flags and fields are supported by the current kernel (to avoid userspace having to go through several guesses to figure it out). [1]: https://lwn.net/Articles/588444/ [2]: https://lore.kernel.org/lkml/CA+55aFyyxJL1LyXZeBsf2ypriraj5ut1XkNDsunRBqgVjZU_6Q@mail.gmail.com [3]: commit 629e014bb834 ("fs: completely ignore unknown open flags") [4]: https://sourceware.org/bugzilla/show_bug.cgi?id=17523 [5]: https://lore.kernel.org/lkml/20190930183316.10190-2-cyphar@cyphar.com/ [6]: https://youtu.be/ggD-eb3yPVs Suggested-by: Christian Brauner <christian.brauner@ubuntu.com> Signed-off-by: Aleksa Sarai <cyphar@cyphar.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-01-18MAINTAINERS: Mark simple firmware interface (SFI) obsoleteLukas Bulwahn
Len Brown has not been active in this part since around 2010 and confirmed that he is not maintaining this part of the kernel sources anymore and the git log suggests that nobody is actively maintaining it. The referenced git tree does not exist. Instead, I found an sfi branch in Len's kernel git repository, but that has not been updated since 2014; so that is not worth to be mentioned in MAINTAINERS now anymore either. Len Brown expects no further systems to be shipped with SFI, so we can mark it obsolete and schedule it for deletion. This change was motivated after I found that I could not send any mails to the sfi-devel mailing list, and that the mailing list does not exist anymore. Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Signed-off-by: Borislav Petkov <bp@suse.de> Link: https://lkml.kernel.org/r/20200118082545.23464-1-lukas.bulwahn@gmail.com
2020-01-17MAINTAINERS: Add brcmstb PCIe controller entryNicolas Saenz Julienne
The controller serves both the Raspberry Pi 4 (bcm2711) and brcmstb platforms. Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2020-01-16Merge tag 'armsoc-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Olof Johansson: "I've been sitting on these longer than I meant, so the patch count is a bit higher than ideal for this part of the release. There's also some reverts of double-applied patches that brings the diffstat up a bit. With that said, the biggest changes are: - Revert of duplicate i2c device addition on two Aspeed (BMC) Devicetrees. - Move of two device nodes that got applied to the wrong part of the tree on ASpeed G6. - Regulator fix for Beaglebone X15 (adding 12/5V supplies) - Use interrupts for keys on Amlogic SM1 to avoid missed polls In addition to that, there is a collection of smaller DT fixes: - Power supply assignment fixes for i.MX6 - Fix of interrupt line for magnetometer on i.MX8 Librem5 devkit - Build fixlets (selects) for davinci/omap2+ - More interrupt number fixes for Stratix10, Amlogic SM1, etc. - ... and more similar fixes across different platforms And some non-DT stuff: - optee fix to register multiple shared pages properly - Clock calculation fixes for MMP3 - Clock fixes for OMAP as well" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (42 commits) MAINTAINERS: Add myself as the co-maintainer for Actions Semi platforms ARM: dts: imx7: Fix Toradex Colibri iMX7S 256MB NAND flash support ARM: dts: imx6sll-evk: Remove incorrect power supply assignment ARM: dts: imx6sl-evk: Remove incorrect power supply assignment ARM: dts: imx6sx-sdb: Remove incorrect power supply assignment ARM: dts: imx6qdl-sabresd: Remove incorrect power supply assignment ARM: dts: imx6q-icore-mipi: Use 1.5 version of i.Core MX6DL ARM: omap2plus: select RESET_CONTROLLER ARM: davinci: select CONFIG_RESET_CONTROLLER ARM: dts: aspeed: rainier: Fix fan fault and presence ARM: dts: aspeed: rainier: Remove duplicate i2c busses ARM: dts: aspeed: tacoma: Remove duplicate flash nodes ARM: dts: aspeed: tacoma: Remove duplicate i2c busses ARM: dts: aspeed: tacoma: Fix fsi master node ARM: dts: aspeed-g6: Fix FSI master location ARM: dts: mmp3: Fix the TWSI ranges clk: mmp2: Fix the order of timer mux parents ARM: mmp: do not divide the clock rate arm64: dts: rockchip: Fix IR on Beelink A1 optee: Fix multi page dynamic shm pool alloc ...