Age | Commit message (Collapse) | Author |
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers
Qualcomm driver updates for v6.3
This introduces a new driver for the Data Capture and Compare block,
which provides a mechanism for capturing hardware state (access MMIO
registers) either upon request of triggered automatically e.g. upon a
watchdog bite, for post mortem analysis.
The remote filesystem memory share driver gains support for having its
memory bound to more than a single VMID.
The SCM driver gains the minimal support needed to support a new
mechanism where secure world can put calls on hold and later request
them to be retried.
Support for the new SA8775P platform is added to rpmhpd, QDU1000 is
added to the SCM driver and a long list of platforms are added to the
socinfo driver. Support for socinfo data revision 16 is also introduced.
Lastly a driver to program the ramp controller in MSM8976 is introduced.
* tag 'qcom-drivers-for-6.3' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (33 commits)
firmware: qcom: scm: Add wait-queue handling logic
dt-bindings: firmware: qcom,scm: Add optional interrupt
Revert "dt-bindings: power: rpmpd: Add SM4250 support"
Revert "soc: qcom: rpmpd: Add SM4250 support"
soc: qcom: socinfo: Add a bunch of older SoCs
dt-bindings: arm: qcom,ids: Add a bunch of older SoCs
dt-bindings: arm: qcom,ids: Add QRD board ID
soc: qcom: socinfo: Fix soc_id order
dt-bindings: soc: qcom: smd-rpm: Exclude MSM8936 from glink-channels
dt-bindings: firmware: qcom: scm: Separate VMIDs from header to bindings
soc: qcom: rmtfs: Optionally map RMTFS to more VMs
dt-bindings: reserved-memory: rmtfs: Make qcom,vmid an array
dt-bindings: firmware: scm: Add QDU1000/QRU1000 compatible
dt-bindings: firmware: qcom,scm: narrow clocks and interconnects
dt-bindings: firmware: qcom,scm: document MSM8226 clocks
soc: qcom: ramp_controller: Make things static
soc: qcom: rmphpd: add power domains for sa8775p
dt-bindings: power: qcom,rpmpd: document sa8775p
PM: AVS: qcom-cpr: Fix an error handling path in cpr_probe()
soc: qcom: dcc: rewrite description of dcc sysfs files
...
Link: https://lore.kernel.org/r/20230126163008.3676950-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
entry
brcm,bcm63xx-hsspi-peripheral-props.yaml is not in use at least for now.
Remove it from the maintainer entry.
Fixes: 80323599e33f ("MAINTAINERS: Add entry for Broadcom Broadband SoC HS SPI drivers")
Reported-by: kernel test robot <lkp@intel.com>
https://lore.kernel.org/oe-kbuild-all/202302121840.GtduUT37-lkp@intel.com/
Signed-off-by: William Zhang <william.zhang@broadcom.com>
Link: https://lore.kernel.org/r/20230212205054.26348-1-william.zhang@broadcom.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Both Rich Felker and Yoshinori Sato haven't done any work on arch/sh
for a while. As I have been maintaining Debian's sh4 port since 2014,
I am interested to keep the architecture alive.
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Acked-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Given BPF is increasingly being used beyond just the Linux kernel, with
implementations in NICs and other hardware, Windows, etc, there is an
ongoing effort to document and standardize parts of the existing BPF
infrastructure such as its ISA. As "source of truth" we decided some
time ago to rely on the in-tree documentation, in particular, starting
out with the Documentation/bpf/instruction-set.rst as a base for later
RFC drafts on the ISA. Therefore, we want to ensure that changes to that
document have bpf@ietf.org in Cc, so add a MAINTAINERS file entry with
a section on documents related to standardization efforts. For now, this
only relates to instruction-set.rst, and later additional files will be
added.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Dave Thaler <dthaler@microsoft.com>
Cc: bpf@ietf.org
Link: https://datatracker.ietf.org/doc/bofreq-thaler-bpf-ebpf/
Link: https://lore.kernel.org/r/57619c0dd8e354d82bf38745f99405e3babdc970.1676068387.git.daniel@iogearbox.net
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Include the support for enumerating and provisioning ram regions for
v6.3. This also include a default policy change for ram / volatile
device-dax instances to assign them to the dax_kmem driver by default.
|
|
While platform firmware takes some responsibility for mapping the RAM
capacity of CXL devices present at boot, the OS is responsible for
mapping the remainder and hot-added devices. Platform firmware is also
responsible for identifying the platform general purpose memory pool,
typically DDR attached DRAM, and arranging for the remainder to be 'Soft
Reserved'. That reservation allows the CXL subsystem to route the memory
to core-mm via memory-hotplug (dax_kmem), or leave it for dedicated
access (device-dax).
The new 'struct cxl_dax_region' object allows for a CXL memory resource
(region) to be published, but also allow for udev and module policy to
act on that event. It also prevents cxl_core.ko from having a module
loading dependency on any drivers/dax/ modules.
Tested-by: Fan Ni <fan.ni@samsung.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/167602003896.1924368.10335442077318970468.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Add the Loongson-2 clock binding with DT schema format using
json-schema.
Signed-off-by: Yinbo Zhu <zhuyinbo@loongson.cn>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20221129034157.15036-4-zhuyinbo@loongson.cn
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
This file defines all Loongson-2 SoC clock indexes, it should be
included in the device tree in which there's device using the
clocks.
Signed-off-by: Yinbo Zhu <zhuyinbo@loongson.cn>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20221129034157.15036-1-zhuyinbo@loongson.cn
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Add pinctrl driver for StarFive JH7110 SoC sys pinctrl controller.
Co-developed-by: Emil Renner Berthing <kernel@esmil.dk>
Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
Signed-off-by: Jianlong Huang <jianlong.huang@starfivetech.com>
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
Link: https://lore.kernel.org/r/20230209143702.44408-4-hal.feng@starfivetech.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Add pinctrl bindings for StarFive JH7110 SoC sys pinctrl controller.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jianlong Huang <jianlong.huang@starfivetech.com>
Co-developed-by: Emil Renner Berthing <kernel@esmil.dk>
Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
Link: https://lore.kernel.org/r/20230209143702.44408-2-hal.feng@starfivetech.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull PCI fixes from Bjorn Helgaas:
- Move to a shared PCI git tree (Bjorn Helgaas)
- Add Krzysztof Wilczyński as another PCI maintainer (Lorenzo
Pieralisi)
- Revert a couple ASPM patches to fix suspend/resume regressions (Bjorn
Helgaas)
* tag 'pci-v6.2-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
Revert "PCI/ASPM: Refactor L1 PM Substates Control Register programming"
Revert "PCI/ASPM: Save L1 PM Substates Capability for suspend/resume"
MAINTAINERS: Promote Krzysztof to PCI controller maintainer
MAINTAINERS: Move to shared PCI tree
|
|
The driver and device tree doc were originally authored by Jonas Gorski
and it has been updated from Broadcom recently including the dts yaml
file and a new driver for the updated controller. Add Jonas Gorski and
Broadcom engineers William Zhang and Kursad Oney as the maintainers.
Signed-off-by: William Zhang <william.zhang@broadcom.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20230209200246.141520-16-william.zhang@broadcom.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
According to the bounce sent by Dell's mailserver this user does not
exist (anymore).
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20230207-maintainers-dell-wmi-sysman-v1-1-6594fea12f6c@weissschuh.net
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Most of the files there are being used under PDx86 subsystem or
tightly related drivers (like drivers/clk/x86/). I think it makes
sense to assure that PDx86 keeps an eye on the changes there.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230206150202.27892-1-andriy.shevchenko@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Commit c388f458bc34 ("hwrng: starfive - Add TRNG driver for StarFive SoC")
adds the STARFIVE TRNG DRIVER section to MAINTAINERS, but refers to the
non-existing file drivers/char/hw_random/starfive-trng.c rather than to the
actually added file drivers/char/hw_random/jh7110-trng.c in this commit.
Hence, ./scripts/get_maintainer.pl --self-test=patterns complains about a
broken reference.
Repair this file entry in STARFIVE TRNG DRIVER.
Fixes: c388f458bc34 ("hwrng: starfive - Add TRNG driver for StarFive SoC")
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Acked-by: Jia Jie Ho <jiajie.ho@starfivetech.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
I only use the kernel.org repository for Landlock.
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Link: https://lore.kernel.org/r/20230209223814.308370-1-mic@digikod.net
Reviewed-by: Paul Moore <paul@paul-moore.com>
|
|
The Xilinx DMA/Bridge Subsystem for PCIe (XDMA) provides up to 16 user
interrupt wires to user logic that generate interrupts to the host.
This patch adds APIs to enable/disable user logic interrupt for a given
interrupt wire index.
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Signed-off-by: Sonal Santan <sonal.santan@amd.com>
Signed-off-by: Max Zhen <max.zhen@amd.com>
Signed-off-by: Brian Xu <brian.xu@amd.com>
Tested-by: Martin Tuma <tumic@gpxsee.org>
Link: https://lore.kernel.org/r/1674145926-29449-3-git-send-email-lizhi.hou@amd.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Add driver to enable PCIe board which uses XDMA (the DMA/Bridge Subsystem
for PCI Express). For example, Xilinx Alveo PCIe devices.
https://www.xilinx.com/products/boards-and-kits/alveo.html
The XDMA engine support up to 4 Host to Card (H2C) and 4 Card to Host (C2H)
channels. Memory transfers are specified on a per-channel basis in
descriptor linked lists, which the DMA fetches from host memory and
processes. Events such as descriptor completion and errors are signaled
using interrupts. The hardware detail is provided by
https://docs.xilinx.com/r/en-US/pg195-pcie-dma/Introduction
This driver implements dmaengine APIs.
- probe the available DMA channels
- use dma_slave_map for channel lookup
- use virtual channel to manage dmaengine tx descriptors
- implement device_prep_slave_sg callback to handle host scatter gather
list
- implement device_config to config device address for DMA transfer
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Signed-off-by: Sonal Santan <sonal.santan@amd.com>
Signed-off-by: Max Zhen <max.zhen@amd.com>
Signed-off-by: Brian Xu <brian.xu@amd.com>
Tested-by: Martin Tuma <tumic@gpxsee.org>
Link: https://lore.kernel.org/r/1674145926-29449-2-git-send-email-lizhi.hou@amd.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
net/devlink/leftover.c / net/core/devlink.c:
565b4824c39f ("devlink: change port event netdev notifier from per-net to global")
f05bd8ebeb69 ("devlink: move code to a dedicated directory")
687125b5799c ("devlink: split out core code")
https://lore.kernel.org/all/20230208094657.379f2b1a@canb.auug.org.au/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Create a folder "thermal" under Documentation/admin-guide and move
intel_powerclamp documentation to this folder.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The diag288_wdt watchdog driver is s390 specific.
Document who is responsible for this driver.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Storage Class Memory driver support for s390 architecture has been there
for a while. The original author of this work, Sebastian Ott has left IBM
and I am taking over this module. Adding myself as the upstream maintainer
for SCM on s390 architecture.
Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Acked-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
After contributing the driver, add myself as the maintainer for the
Infineon PEB2466 codec.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Link: https://lore.kernel.org/r/20230206144904.91078-4-herve.codina@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This patch adds an entry in the MAINTAINERS file for the MOST(R)
Technology driver.
Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Parthiban Veerasooran <Parthiban.Veerasooran@microchip.com>
Link: https://lore.kernel.org/r/20230209110651.168962-1-Parthiban.Veerasooran@microchip.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This reverts commit e33fdb5a02490059e2f48ced2c038c8a46c6476d.
The saa7146-based devices are still in use, esp. for DVB. So move
these drivers back to mainline.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
I do no longer have access to qcom CPR hardware, nor the documentation for
said hardware.
Based on past and recent activity, I propose Bjorn and Konrad as the new
qcom CPR maintainers.
Signed-off-by: Niklas Cassel <nks@flawful.org>
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230123104305.44641-1-niklas.cassel@wdc.com
|
|
Linux 6.2-rc7
* tag 'v6.2-rc7': (1549 commits)
Linux 6.2-rc7
fbcon: Check font dimension limits
efi: fix potential NULL deref in efi_mem_reserve_persistent
kernel/irq/irqdomain.c: fix memory leak with using debugfs_lookup()
HV: hv_balloon: fix memory leak with using debugfs_lookup()
mtk_sgmii: enable PCS polling to allow SFP work
net: mediatek: sgmii: fix duplex configuration
net: mediatek: sgmii: ensure the SGMII PHY is powered down on configuration
MAINTAINERS: update SCTP maintainers
MAINTAINERS: ipv6: retire Hideaki Yoshifuji
mailmap: add John Crispin's entry
MAINTAINERS: bonding: move Veaceslav Falico to CREDITS
net: openvswitch: fix flow memory leak in ovs_flow_cmd_new
net: ethernet: mtk_eth_soc: disable hardware DSA untagging for second MAC
virtio-net: Keep stop() to follow mirror sequence of open()
efi: Accept version 2 of memory attributes table
ceph: blocklist the kclient when receiving corrupted snap trace
ceph: move mount state enum to super.h
selftests: net: udpgso_bench_tx: Cater for pending datagrams zerocopy benchmarking
selftests: net: udpgso_bench: Fix racing bug between the rx/tx programs
...
|
|
pci1xxxx is a PCIe switch with a multi-function endpoint on one of
its downstream ports. Quad-uart is one of the functions in the
multi-function endpoint. This driver loads for the quad-uart and
enumerates single or multiple instances of uart based on the PCIe
subsystem device ID.
Co-developed-by: Tharun Kumar P <tharunkumar.pasumarthi@microchip.com>
Signed-off-by: Tharun Kumar P <tharunkumar.pasumarthi@microchip.com>
Signed-off-by: Kumaravel Thiagarajan <kumaravel.thiagarajan@microchip.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230207164814.3104605-3-kumaravel.thiagarajan@microchip.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Convert ST STIH4xx HDMI CEC bindings to DT schema.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Convert NVIDIA Tegra HDMI CEC bindings to DT schema.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Convert HDMI CEC GPIO bindings to DT schema.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Convert Samsung S5P HDMI CEC adapter bindings to DT schema.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Convert common HDMI CEC adapter bindings to DT schema.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Move amlogic,meson-gx-ao-cec.yaml bindings to cec subfolder and drop
unneeded quotes.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The properties of devices in IXP4xx expansion bus need to be also
applied to actual devices' bindings. Prepare for this by splitting them
to separate intel,ixp4xx-expansion-peripheral-props binding, just like
other memory-controller peripheral properties.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20230206092624.22922-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
We've moved the upstream Linux Kernel audit subsystem discussions to
a new mailing list, this patch updates the MAINTAINERS info with the
new list address.
Marking this for stable inclusion to help speed uptake of the new
list across all of the supported kernel releases. This is a doc only
patch so the risk should be close to nil.
Cc: stable@vger.kernel.org
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
Zulip organization "rust-for-linux" was created 2 years ago[1] and has
proven to be a great place for Rust related discussion, therefore
add the information in MAINTAINERS file so that newcomers have more
options to find guide and help.
Link: https://lore.kernel.org/rust-for-linux/CANiq72=xVaMQkgCA9rspjV8bhWDGqAn4x78B0_4U1WBJYj1PiA@mail.gmail.com/ [1]
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Reviewed-by: Vincenzo Palazzo <vincenzopalazzodev@gmail.com>
Reviewed-by: Alice Ferrazzi <alice.ferrazzi@miraclelinux.com>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Add entry for TPMI (Topology Aware Register and PM Capsule Interface)
driver.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://lore.kernel.org/r/20230202010738.2186174-8-srinivas.pandruvada@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
To sync with libbpf, etc.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/drivers
Samsung SoC driver changes for v6.3
Deprecate syscon phandle to the PMU node in MIPI and DP video phy
drivers in favor of putting the device nodes directly under the PMU
nodes. This better reflects device hierarchy and allows later to solve
dtc W=1 and dtbs_check warnings.
* tag 'samsung-drivers-6.3-2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
phy: samsung,mipi-video-phy: deprecate syscon phandle
phy: samsung,dp-video-phy: deprecate syscon phandle
dt-bindings: phy: samsung,mipi-video-phy: deprecate syscon phandle
dt-bindings: phy: samsung,dp-video-phy: deprecate syscon phandle
MAINTAINERS: arm64: tesla: correct pattern for directory
dt-bindings: soc: samsung: exynos-sysreg: correct indentation for deprecated
dt-bindings: soc: samsung: exynos-sysreg: add dedicated SYSREG compatibles to Exynosautov9
dt-bindings: soc: samsung: exynos-sysreg: add dedicated SYSREG compatibles to Exynos850
dt-bindings: soc: samsung: exynos-sysreg: Add tesla FSD sysreg compatibles
dt-bindings: soc: samsung: exynos-sysreg: add clocks for Exynos850
dt-bindings: soc: samsung: exynos-sysreg: add dedicated SYSREG compatibles to Exynos5433
dt-bindings: soc: samsung: exynos-sysreg: split from syscon
Link: https://lore.kernel.org/r/20230205144657.951749-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Add driver for the Sony IMX415 CMOS image sensor.
Signed-off-by: Gerald Loacker <gerald.loacker@wolfvision.net>
Co-developed-by: Michael Riesch <michael.riesch@wolfvision.net>
Signed-off-by: Michael Riesch <michael.riesch@wolfvision.net>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Add devicetree binding for the Sony IMX415 CMOS image sensor.
Signed-off-by: Michael Riesch <michael.riesch@wolfvision.net>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Add the bindings documentation for Omnivision OV5670 image sensor.
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-by: Luca Weiss <luca@z3ntu.xyz>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
This patch adds documentation of device tree in YAML schema for the
OV5675 CMOS image sensor from Omnivision.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The IMX296LLR is a monochrome 1.60MP CMOS sensor from Sony. The driver
supports cropping and binning (but not both at the same time due to
hardware limitations) and exposure, gain, vertical blanking and test
pattern controls.
Preliminary support is also included for the color IMX296LQR sensor.
[Sakari Ailus: Make driver's remove function return void]
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Add YAML devicetree binding for IMX296 CMOS image sensor. Let's also
add MAINTAINERS entry for the binding and driver.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Convert DT bindings document for AKM AK7375 VCM to DT schema
format and add an example.
Signed-off-by: Yassine Oudjana <y.oudjana@protonmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-by: Umang Jain <umang.jain@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
We need the char-misc driver fixes in here as other patches depend on
them.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We need the USB fixes in here, and this resolves a merge conflict with
the i915 driver as reported in linux-next
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add a driver for OmniVision OV8858 image sensor.
The driver currently supports operations with 2 and 4 data lanes, in
full resolution and half-binned resolution modes.
The driver has been upported from the PinephonePro BSP available at
https://gitlab.com/pine64-org/linux.git
at commit 8c4a90c12dc2 ("media: i2c: ov8858: Use default subdev
name").
Signed-off-by: Nicholas Roth <nicholas@rothemail.net>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|