summaryrefslogtreecommitdiff
path: root/Makefile
AgeCommit message (Collapse)Author
2019-01-21Linux 5.0-rc3Linus Torvalds
2019-01-17kbuild: mark prepare0 as PHONY to fix external module buildMasahiro Yamada
Commit c3ff2a5193fa ("powerpc/32: add stack protector support") caused kernel panic on PowerPC when an external module is used with CONFIG_STACKPROTECTOR because the 'prepare' target was not executed for the external module build. Commit e07db28eea38 ("kbuild: fix single target build for external module") turned it into a build error because the 'prepare' target is now executed but the 'prepare0' target is missing for the external module build. External module on arm/arm64 with CONFIG_STACKPROTECTOR_PER_TASK is also broken in the same way. Move 'PHONY += prepare0' to the common place. GNU Make is fine with missing rule for phony targets. I also removed the comment which is wrong irrespective of this commit. I minimize the change so it can be easily backported to 4.20.x To fix v4.20, please backport e07db28eea38 ("kbuild: fix single target build for external module"), and then this commit. Link: https://bugzilla.kernel.org/show_bug.cgi?id=201891 Fixes: e07db28eea38 ("kbuild: fix single target build for external module") Fixes: c3ff2a5193fa ("powerpc/32: add stack protector support") Fixes: 189af4657186 ("ARM: smp: add support for per-task stack canaries") Fixes: 0a1213fa7432 ("arm64: enable per-task stack canaries") Cc: linux-stable <stable@vger.kernel.org> # v4.20 Reported-by: Samuel Holland <samuel@sholland.org> Reported-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Tested-by: Alexey Kardashevskiy <aik@ozlabs.ru>
2019-01-16kbuild: remove unused archmrproperMasahiro Yamada
No one uses archmrproper. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-01-14Linux 5.0-rc2Linus Torvalds
2019-01-06Linux 5.0-rc1Linus Torvalds
2019-01-06kbuild: remove unnecessary stubs for archheader and archscriptsMasahiro Yamada
Make simply skips a missing rule when it is marked as .PHONY. Remove the dummy targets. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-01-06kbuild: use assignment instead of define ... endef for filechk_* rulesMasahiro Yamada
You do not have to use define ... endef for filechk_* rules. For simple cases, the use of assignment looks cleaner, IMHO. I updated the usage for scripts/Kbuild.include in case somebody misunderstands the 'define ... endif' is the requirement. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2019-01-06kbuild: change filechk to surround the given command with { }Masahiro Yamada
filechk_* rules often consist of multiple 'echo' lines. They must be surrounded with { } or ( ) to work correctly. Otherwise, only the string from the last 'echo' would be written into the target. Let's take care of that in the 'filechk' in scripts/Kbuild.include to clean up filechk_* rules. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-01-06jump_label: move 'asm goto' support test to KconfigMasahiro Yamada
Currently, CONFIG_JUMP_LABEL just means "I _want_ to use jump label". The jump label is controlled by HAVE_JUMP_LABEL, which is defined like this: #if defined(CC_HAVE_ASM_GOTO) && defined(CONFIG_JUMP_LABEL) # define HAVE_JUMP_LABEL #endif We can improve this by testing 'asm goto' support in Kconfig, then make JUMP_LABEL depend on CC_HAS_ASM_GOTO. Ugly #ifdef HAVE_JUMP_LABEL will go away, and CONFIG_JUMP_LABEL will match to the real kernel capability. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc) Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
2018-12-29Merge tag 'kbuild-v4.21' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild updates from Masahiro Yamada: "Kbuild core: - remove unneeded $(call cc-option,...) switches - consolidate Clang compiler flags into CLANG_FLAGS - announce the deprecation of SUBDIRS - fix single target build for external module - simplify the dependencies of 'prepare' stage targets - allow fixdep to directly write to .*.cmd files - simplify dependency generation for CONFIG_TRIM_UNUSED_KSYMS - change if_changed_rule to accept multi-line recipe - move .SECONDARY special target to scripts/Kbuild.include - remove redundant 'set -e' - improve parallel execution for CONFIG_HEADERS_CHECK - misc cleanups Treewide fixes and cleanups - set Clang flags correctly for PowerPC boot images - fix UML build error with CONFIG_GCC_PLUGINS - remove unneeded patterns from .gitignore files - refactor firmware/Makefile - remove unneeded rules for *offsets.s - avoid unneeded regeneration of intermediate .s files - clean up ./Kbuild Modpost: - remove unused -M, -K options - fix false positive warnings about section mismatch - use simple devtable lookup instead of linker magic - misc cleanups Coccinelle: - relax boolinit.cocci checks for overall consistency - fix warning messages of boolinit.cocci Other tools: - improve -dirty check of scripts/setlocalversion - add a tool to generate compile_commands.json from .*.cmd files" * tag 'kbuild-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (51 commits) kbuild: remove unused cmd_gentimeconst kbuild: remove $(obj)/ prefixes in ./Kbuild treewide: add intermediate .s files to targets treewide: remove explicit rules for *offsets.s firmware: refactor firmware/Makefile firmware: remove unnecessary patterns from .gitignore scripts: remove unnecessary ihex2fw and check-lc_ctypes from .gitignore um: remove unused filechk_gen_header in Makefile scripts: add a tool to produce a compile_commands.json file kbuild: add -Werror=implicit-int flag unconditionally kbuild: add -Werror=strict-prototypes flag unconditionally kbuild: add -fno-PIE flag unconditionally scripts: coccinelle: Correct warning message scripts: coccinelle: only suggest true/false in files that already use them kbuild: handle part-of-module correctly for *.ll and *.symtypes kbuild: refactor part-of-module kbuild: refactor quiet_modtag kbuild: remove redundant quiet_modtag for $(obj-m) kbuild: refactor Makefile.asm-generic user/Makefile: Fix typo and capitalization in comment section ...
2018-12-28Merge tag 'devicetree-for-4.21' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull Devicetree updates from Rob Herring: "The biggest highlight here is the start of using json-schema for DT bindings. Being able to validate bindings has been discussed for years with little progress. - Initial support for DT bindings using json-schema language. This is the start of converting DT bindings from free-form text to a structured format. - Reworking of initrd address initialization. This moves to using the phys address instead of virt addr in the DT parsing code. This rework was motivated by CONFIG_DEV_BLK_INITRD causing unnecessary rebuilding of lots of files. - Fix stale phandle entries in phandle cache - DT overlay validation improvements. This exposed several memory leak bugs which have been fixed. - Use node name and device_type helper functions in DT code - Last remaining conversions to using %pOFn printk specifier instead of device_node.name directly - Create new common RTC binding doc and move all trivial RTC devices out of trivial-devices.txt. - New bindings for Freescale MAG3110 magnetometer, Cadence Sierra PHY, and Xen shared memory - Update dtc to upstream version v1.4.7-57-gf267e674d145" * tag 'devicetree-for-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (68 commits) of: __of_detach_node() - remove node from phandle cache of: of_node_get()/of_node_put() nodes held in phandle cache gpio-omap.txt: add reg and interrupts properties dt-bindings: mrvl,intc: fix a trivial typo dt-bindings: iio: magnetometer: add dt-bindings for freescale mag3110 dt-bindings: Convert trivial-devices.txt to json-schema dt-bindings: arm: mrvl: amend Browstone compatible string dt-bindings: arm: Convert Tegra board/soc bindings to json-schema dt-bindings: arm: Convert ZTE board/soc bindings to json-schema dt-bindings: arm: Add missing Xilinx boards dt-bindings: arm: Convert Xilinx board/soc bindings to json-schema dt-bindings: arm: Convert VIA board/soc bindings to json-schema dt-bindings: arm: Convert ST STi board/soc bindings to json-schema dt-bindings: arm: Convert SPEAr board/soc bindings to json-schema dt-bindings: arm: Convert CSR SiRF board/soc bindings to json-schema dt-bindings: arm: Convert QCom board/soc bindings to json-schema dt-bindings: arm: Convert TI nspire board/soc bindings to json-schema dt-bindings: arm: Convert TI davinci board/soc bindings to json-schema dt-bindings: arm: Convert Calxeda board/soc bindings to json-schema dt-bindings: arm: Convert Altera board/soc bindings to json-schema ...
2018-12-23Linux 4.20Linus Torvalds
2018-12-21Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Ingo Molnar: "The biggest part is a series of reverts for the macro based GCC inlining workarounds. It caused regressions in distro build and other kernel tooling environments, and the GCC project was very receptive to fixing the underlying inliner weaknesses - so as time ran out we decided to do a reasonably straightforward revert of the patches. The plan is to rely on the 'asm inline' GCC 9 feature, which might be backported to GCC 8 and could thus become reasonably widely available on modern distros. Other than those reverts, there's misc fixes from all around the place. I wish our final x86 pull request for v4.20 was smaller..." * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: Revert "kbuild/Makefile: Prepare for using macros in inline assembly code to work around asm() related GCC inlining bugs" Revert "x86/objtool: Use asm macros to work around GCC inlining bugs" Revert "x86/refcount: Work around GCC inlining bug" Revert "x86/alternatives: Macrofy lock prefixes to work around GCC inlining bugs" Revert "x86/bug: Macrofy the BUG table section handling, to work around GCC inlining bugs" Revert "x86/paravirt: Work around GCC inlining bugs when compiling paravirt ops" Revert "x86/extable: Macrofy inline assembly code to work around GCC inlining bugs" Revert "x86/cpufeature: Macrofy inline assembly code to work around GCC inlining bugs" Revert "x86/jump-labels: Macrofy inline assembly code to work around GCC inlining bugs" x86/mtrr: Don't copy uninitialized gentry fields back to userspace x86/fsgsbase/64: Fix the base write helper functions x86/mm/cpa: Fix cpa_flush_array() TLB invalidation x86/vdso: Pass --eh-frame-hdr to the linker x86/mm: Fix decoy address handling vs 32-bit builds x86/intel_rdt: Ensure a CPU remains online for the region's pseudo-locking sequence x86/dump_pagetables: Fix LDT remap address marker x86/mm: Fix guard hole handling
2018-12-20Merge tag 'kbuild-fixes-v4.20-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fix from Masahiro Yamada: "Fix false positive warning/error about missing library for objtool" * tag 'kbuild-fixes-v4.20-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kbuild: fix false positive warning/error about missing libelf
2018-12-20kbuild: fix false positive warning/error about missing libelfMasahiro Yamada
For the same reason as commit 25896d073d8a ("x86/build: Fix compiler support check for CONFIG_RETPOLINE"), you cannot put this $(error ...) into the parse stage of the top Makefile. Perhaps I'd propose a more sophisticated solution later, but this is the best I can do for now. Link: https://lkml.org/lkml/2017/12/25/211 Reported-by: Paul Gortmaker <paul.gortmaker@windriver.com> Reported-by: Bernd Edlinger <bernd.edlinger@hotmail.de> Reported-by: Qian Cai <cai@lca.pw> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Tested-by: Qian Cai <cai@lca.pw>
2018-12-19Revert "kbuild/Makefile: Prepare for using macros in inline assembly code to ↵Ingo Molnar
work around asm() related GCC inlining bugs" This reverts commit 77b0bf55bc675233d22cd5df97605d516d64525e. See this commit for details about the revert: e769742d3584 ("Revert "x86/jump-labels: Macrofy inline assembly code to work around GCC inlining bugs"") Conflicts: arch/x86/Makefile Reported-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Borislav Petkov <bp@alien8.de> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Cc: Juergen Gross <jgross@suse.com> Cc: Richard Biener <rguenther@suse.de> Cc: Kees Cook <keescook@chromium.org> Cc: Segher Boessenkool <segher@kernel.crashing.org> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Nadav Amit <namit@vmware.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-12-16Linux 4.20-rc7Linus Torvalds
2018-12-17kbuild: add -Werror=implicit-int flag unconditionallyMasahiro Yamada
This flag is documented in the GCC 4.6 manual, and recognized by Clang as well. Let's rip off the cc-option switch. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
2018-12-17kbuild: add -Werror=strict-prototypes flag unconditionallyMasahiro Yamada
-Wstrict-prototypes is added to KBUILD_CFLAGS first, then overridden by -Werror=strict-prototypes later. Let's add -Werror=strict-prototypes unconditionally because it is supported by GCC 4.6, and also by Clang. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
2018-12-17kbuild: add -fno-PIE flag unconditionallyMasahiro Yamada
This flag is documented in the GCC 4.6 manual, and recognized by Clang as well. Let's rip off the cc-option switch. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
2018-12-17kbuild: refactor Makefile.asm-genericMasahiro Yamada
- Use conventional $(MAKE) $(asm-generic)=<dir> style for directory descending - Remove unneeded FORCE since "all" is a phony target - Remove unneeded "_dummy :=" assignment - Skip $(shell mkdir ...) when headers exist in the directory - Misc cleanups Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Sam Ravnborg <sam@ravnborg.org>
2018-12-13kbuild: Add support for DT binding schema checksRob Herring
This adds the build infrastructure for checking DT binding schema documents and validating dts files using the binding schema. Check DT binding schema documents: make dt_binding_check Build dts files and check using DT binding schema: make dtbs_check Optionally, DT_SCHEMA_FILES can be passed in with a schema file(s) to use for validation. This makes it easier to find and fix errors generated by a specific schema. Currently, the validation targets are separate from a normal build to avoid a hard dependency on the external DT schema project and because there are lots of warnings generated. Cc: Jonathan Corbet <corbet@lwn.net> Cc: Mark Rutland <mark.rutland@arm.com> Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Michal Marek <michal.lkml@markovi.net> Cc: linux-doc@vger.kernel.org Cc: devicetree@vger.kernel.org Cc: linux-kbuild@vger.kernel.org Signed-off-by: Rob Herring <robh@kernel.org>
2018-12-09Linux 4.20-rc6Linus Torvalds
2018-12-08kbuild: exploit parallel building for CONFIG_HEADERS_CHECKMasahiro Yamada
When CONFIG_HEADERS_CHECK is enabled, the headers_check is executed as a serialized task in the vmlinux recipe. Make it independent of vmlinux so that parallel building can process the headers_check and other build targets simultaneously. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-12-02Linux 4.20-rc5Linus Torvalds
2018-12-01kbuild: let fixdep directly write to .*.cmd filesMasahiro Yamada
Currently, fixdep writes dependencies to .*.tmp, which is renamed to .*.cmd after everything succeeds. This is a very safe way to avoid corrupted .*.cmd files. The if_changed_dep has carried this safety mechanism since it was added in 2002. If fixdep fails for some reasons or a user terminates the build while fixdep is running, the incomplete output from the fixdep could be troublesome. This is my insight about some bad scenarios: [1] If the compiler succeeds to generate *.o file, but fixdep fails to write necessary dependencies to .*.cmd file, Make will miss to rebuild the object when headers or CONFIG options are changed. In this case, fixdep should not generate .*.cmd file at all so that 'arg-check' will surely trigger the rebuild of the object. [2] A partially constructed .*.cmd file may not be a syntactically correct makefile. The next time Make runs, it would include it, then fail to parse it. Once this happens, 'make clean' is be the only way to fix it. In fact, [1] is no longer a problem since commit 9c2af1c7377a ("kbuild: add .DELETE_ON_ERROR special target"). Make deletes a target file on any failure in its recipe. Because fixdep is a part of the recipe of *.o target, if it fails, the *.o is deleted anyway. However, I am a bit worried about the slight possibility of [2]. So, here is a solution. Let fixdep directly write to a .*.cmd file, but allow makefiles to include it only when its corresponding target exists. This effectively reverts commit 2982c953570b ("kbuild: remove redundant $(wildcard ...) for cmd_files calculation"), and commit 00d78ab2ba75 ("kbuild: remove dead code in cmd_files calculation in top Makefile") because now we must check the presence of targets. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-12-01kbuild: descend into scripts/gcc-plugins/ via scripts/MakefileMasahiro Yamada
Now that 'archprepare' depends on 'scripts', Kbuild can descend into scripts/gcc-plugins in a more standard way. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Kees Cook <keescook@chromium.org>
2018-12-01kbuild: make 'archprepare' depend on 'scripts'Masahiro Yamada
Before start descending, Kbuild needs to run 'prepare' and 'scripts', which has been orthogonal to each other. Going forward, let's consider 'scripts' is a part of the preparation. This will allow more cleanups. Move 'scripts' to the prerequisite of 'archprepare', where UML starts compiling target *.c files. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-12-01kbuild: move modpost out of 'scripts' targetMasahiro Yamada
I am eagar to build under the scripts/ directory only with $(HOSTCC), but scripts/mod/ highly depends on the $(CC) and target arch headers. That it why the 'scripts' target must depend on 'asm-generic', 'gcc-plugins', and $(autoksyms_h). Move it to the 'prepare0' stage. I know this is a cheesy workaround, but better than the current situation. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-12-01kbuild: fix UML build error with CONFIG_GCC_PLUGINSMasahiro Yamada
UML fails to build with CONFIG_GCC_PLUGINS=y. $ make -s ARCH=um mrproper $ make -s ARCH=um allmodconfig $ make ARCH=um UPD include/generated/uapi/linux/version.h WRAP arch/x86/include/generated/uapi/asm/bpf_perf_event.h WRAP arch/x86/include/generated/uapi/asm/poll.h WRAP arch/x86/include/generated/asm/dma-contiguous.h WRAP arch/x86/include/generated/asm/early_ioremap.h WRAP arch/x86/include/generated/asm/export.h WRAP arch/x86/include/generated/asm/mcs_spinlock.h WRAP arch/x86/include/generated/asm/mm-arch-hooks.h SYSTBL arch/x86/include/generated/asm/syscalls_32.h SYSHDR arch/x86/include/generated/asm/unistd_32_ia32.h SYSHDR arch/x86/include/generated/asm/unistd_64_x32.h SYSTBL arch/x86/include/generated/asm/syscalls_64.h SYSHDR arch/x86/include/generated/uapi/asm/unistd_32.h SYSHDR arch/x86/include/generated/uapi/asm/unistd_64.h SYSHDR arch/x86/include/generated/uapi/asm/unistd_x32.h HOSTCC scripts/unifdef CC arch/x86/um/user-offsets.s cc1: error: cannot load plugin ./scripts/gcc-plugins/cyc_complexity_plugin.so ./scripts/gcc-plugins/cyc_complexity_plugin.so: cannot open shared object file: No such file or directory cc1: error: cannot load plugin ./scripts/gcc-plugins/structleak_plugin.so ./scripts/gcc-plugins/structleak_plugin.so: cannot open shared object file: No such file or directory cc1: error: cannot load plugin ./scripts/gcc-plugins/latent_entropy_plugin.so ./scripts/gcc-plugins/latent_entropy_plugin.so: cannot open shared object file: No such file or directory cc1: error: cannot load plugin ./scripts/gcc-plugins/randomize_layout_plugin.so ./scripts/gcc-plugins/randomize_layout_plugin.so: cannot open shared object file: No such file or directory make[1]: *** [scripts/Makefile.build;119: arch/x86/um/user-offsets.s] Error 1 make: *** [arch/um/Makefile;152: arch/x86/um/user-offsets.s] Error 2 Reorder the preparation stage (with cleanups) to make sure gcc-plugins is built before descending to arch/x86/um/. Fixes: 6b90bd4ba40b ("GCC plugin infrastructure") Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-12-01kbuild: fix single target build for external moduleMasahiro Yamada
Building a single target in an external module fails due to missing .tmp_versions directory. For example, $ make -C /lib/modules/$(uname -r)/build M=$PWD foo.o will fail in the following way: CC [M] /home/masahiro/foo/foo.o /bin/sh: 1: cannot create /home/masahiro/foo/.tmp_versions/foo.mod: Directory nonexistent This is because $(cmd_crmodverdir) is executed only before building /, %/, %.ko single targets of external modules. Create .tmp_versions in the 'prepare' target. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-12-01kbuild: announce removal of SUBDIRS if usedMasahiro Yamada
SUBDIRS has been kept as a backward compatibility since commit ("[PATCH] kbuild: external module support") in 2002. We do not need multiple ways to do the same thing, so I will remove SUBDIRS after the Linux 5.3 release. I cleaned up in-tree code, and updated the document so that nobody would try to use it. Meanwhile, display the following warning if SUBDIRS is used. Makefile:189: ================= WARNING ================ Makefile:190: 'SUBDIRS' will be removed after Linux 5.3 Makefile:191: Please use 'M=' or 'KBUILD_EXTMOD' instead Makefile:192: ========================================== Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Boris Brezillon <boris.brezillon@bootlin.com> # for scx200_docflash.c Acked-by: Guenter Roeck <linux@roeck-us.net> # for scx200_wdt.c
2018-11-25Linux 4.20-rc4Linus Torvalds
2018-11-18Linux 4.20-rc3Linus Torvalds
2018-11-14Makefile: Export clang toolchain variablesJoel Stanley
The powerpc makefile will use these in it's boot wrapper. Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-11-14kbuild: consolidate Clang compiler flagsMasahiro Yamada
Collect basic Clang options such as --target, --prefix, --gcc-toolchain, -no-integrated-as into a single variable CLANG_FLAGS so that it can be easily reused in other parts of Makefile. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Tested-by: Nick Desaulniers <ndesaulniers@google.com> Acked-by: Greg Hackmann <ghackmann@google.com>
2018-11-14kbuild: add -no-integrated-as Clang option unconditionallyMasahiro Yamada
We are still a way off the Clang's integrated assembler support for the kernel. Hence, -no-integrated-as is mandatory to build the kernel with Clang. If you had an ancient version of Clang that does not recognize this option, you would not be able to compile the kernel anyway. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Tested-by: Nick Desaulniers <ndesaulniers@google.com>
2018-11-11Linux 4.20-rc2Linus Torvalds
2018-11-04Linux 4.20-rc1Linus Torvalds
2018-11-02kbuild: remove cc-name variableMasahiro Yamada
There is one more user of $(cc-name) in the top Makefile. It is supposed to detect Clang before invoking Kconfig, so it should still be there in the $(shell ...) form. All the other users of $(cc-name) have been replaced with $(CONFIG_CC_IS_CLANG). Hence, scripts/Kbuild.include does not need to define cc-name any more. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-11-02kbuild: replace cc-name test with CONFIG_CC_IS_CLANGMasahiro Yamada
Evaluating cc-name invokes the compiler every time even when you are not compiling anything, like 'make help'. This is not efficient. The compiler type has been already detected in the Kconfig stage. Use CONFIG_CC_IS_CLANG, instead. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc) Acked-by: Paul Burton <paul.burton@mips.com> (MIPS) Acked-by: Joel Stanley <joel@jms.id.au>
2018-10-28Merge tag 'vla-v4.20-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull VLA removal from Kees Cook: "Globally warn on VLA use. This turns on "-Wvla" globally now that the last few trees with their VLA removals have landed (crypto, block, net, and powerpc). Arnd mentioned that there may be a couple more VLAs hiding in hard-to-find randconfigs, but nothing big has shaken out in the last month or so in linux-next. We should be basically VLA-free now! Wheee. :) Summary: - Remove unused fallback for BUILD_BUG_ON (which technically contains a VLA) - Lift -Wvla to the top-level Makefile" * tag 'vla-v4.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: Makefile: Globally enable VLA warning compiler.h: give up __compiletime_assert_fallback()
2018-10-28Merge tag 'kbuild-v4.20' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild updates from Masahiro Yamada: - optimize kallsyms slightly - remove check for old CFLAGS usage - add some compiler flags unconditionally instead of evaluating $(call cc-option,...) - fix variable shadowing in host tools - refactor scripts/mkmakefile - refactor various makefiles * tag 'kbuild-v4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: modpost: Create macro to avoid variable shadowing ASN.1: Remove unnecessary shadowed local variable kbuild: use 'else ifeq' for checksrc to improve readability kbuild: remove unneeded link_multi_deps kbuild: add -Wno-unused-but-set-variable flag unconditionally kbuild: add -Wdeclaration-after-statement flag unconditionally kbuild: add -Wno-pointer-sign flag unconditionally modpost: remove leftover symbol prefix handling for module device table kbuild: simplify command line creation in scripts/mkmakefile kbuild: do not pass $(objtree) to scripts/mkmakefile kbuild: remove user ID check in scripts/mkmakefile kbuild: remove VERSION and PATCHLEVEL from $(objtree)/Makefile kbuild: add --include-dir flag only for out-of-tree build kbuild: remove dead code in cmd_files calculation in top Makefile kbuild: hide most of targets when running config or mixed targets kbuild: remove old check for CFLAGS use kbuild: prefix Makefile.dtbinst path with $(srctree) unconditionally kallsyms: remove left-over Blackfin code kallsyms: reduce size a little on 64-bit
2018-10-26Merge tag 'devicetree-for-4.20' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull Devicetree updates from Rob Herring: "A bit bigger than normal as I've been busy this cycle. There's a few things with dependencies and a few things subsystem maintainers didn't pick up, so I'm taking them thru my tree. The fixes from Johan didn't get into linux-next, but they've been waiting for some time now and they are what's left of what subsystem maintainers didn't pick up. Summary: - Sync dtc with upstream version v1.4.7-14-gc86da84d30e4 - Work to get rid of direct accesses to struct device_node name and type pointers in preparation for removing them. New helpers for parsing DT cpu nodes and conversions to use the helpers. printk conversions to %pOFn for printing DT node names. Most went thru subystem trees, so this is the remainder. - Fixes to DT child node lookups to actually be restricted to child nodes instead of treewide. - Refactoring of dtb targets out of arch code. This makes the support more uniform and enables building all dtbs on c6x, microblaze, and powerpc. - Various DT binding updates for Renesas r8a7744 SoC - Vendor prefixes for Facebook, OLPC - Restructuring of some ARM binding docs moving some peripheral bindings out of board/SoC binding files - New "secure-chosen" binding for secure world settings on ARM - Dual licensing of 2 DT IRQ binding headers" * tag 'devicetree-for-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (78 commits) ARM: dt: relicense two DT binding IRQ headers power: supply: twl4030-charger: fix OF sibling-node lookup NFC: nfcmrvl_uart: fix OF child-node lookup net: stmmac: dwmac-sun8i: fix OF child-node lookup net: bcmgenet: fix OF child-node lookup drm/msm: fix OF child-node lookup drm/mediatek: fix OF sibling-node lookup of: Add missing exports of node name compare functions dt-bindings: Add OLPC vendor prefix dt-bindings: misc: bk4: Add device tree binding for Liebherr's BK4 SPI bus dt-bindings: thermal: samsung: Add SPDX license identifier dt-bindings: clock: samsung: Add SPDX license identifiers dt-bindings: timer: ostm: Add R7S9210 support dt-bindings: phy: rcar-gen2: Add r8a7744 support dt-bindings: can: rcar_can: Add r8a7744 support dt-bindings: timer: renesas, cmt: Document r8a7744 CMT support dt-bindings: watchdog: renesas-wdt: Document r8a7744 support dt-bindings: thermal: rcar: Add device tree support for r8a7744 Documentation: dt: Add binding for /secure-chosen/stdout-path dt-bindings: arm: zte: Move sysctrl bindings to their own doc ...
2018-10-23Merge branch 'locking-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull locking and misc x86 updates from Ingo Molnar: "Lots of changes in this cycle - in part because locking/core attracted a number of related x86 low level work which was easier to handle in a single tree: - Linux Kernel Memory Consistency Model updates (Alan Stern, Paul E. McKenney, Andrea Parri) - lockdep scalability improvements and micro-optimizations (Waiman Long) - rwsem improvements (Waiman Long) - spinlock micro-optimization (Matthew Wilcox) - qspinlocks: Provide a liveness guarantee (more fairness) on x86. (Peter Zijlstra) - Add support for relative references in jump tables on arm64, x86 and s390 to optimize jump labels (Ard Biesheuvel, Heiko Carstens) - Be a lot less permissive on weird (kernel address) uaccess faults on x86: BUG() when uaccess helpers fault on kernel addresses (Jann Horn) - macrofy x86 asm statements to un-confuse the GCC inliner. (Nadav Amit) - ... and a handful of other smaller changes as well" * 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (57 commits) locking/lockdep: Make global debug_locks* variables read-mostly locking/lockdep: Fix debug_locks off performance problem locking/pvqspinlock: Extend node size when pvqspinlock is configured locking/qspinlock_stat: Count instances of nested lock slowpaths locking/qspinlock, x86: Provide liveness guarantee x86/asm: 'Simplify' GEN_*_RMWcc() macros locking/qspinlock: Rework some comments locking/qspinlock: Re-order code locking/lockdep: Remove duplicated 'lock_class_ops' percpu array x86/defconfig: Enable CONFIG_USB_XHCI_HCD=y futex: Replace spin_is_locked() with lockdep locking/lockdep: Make class->ops a percpu counter and move it under CONFIG_DEBUG_LOCKDEP=y x86/jump-labels: Macrofy inline assembly code to work around GCC inlining bugs x86/cpufeature: Macrofy inline assembly code to work around GCC inlining bugs x86/extable: Macrofy inline assembly code to work around GCC inlining bugs x86/paravirt: Work around GCC inlining bugs when compiling paravirt ops x86/bug: Macrofy the BUG table section handling, to work around GCC inlining bugs x86/alternatives: Macrofy lock prefixes to work around GCC inlining bugs x86/refcount: Work around GCC inlining bug x86/objtool: Use asm macros to work around GCC inlining bugs ...
2018-10-22Linux 4.19Greg Kroah-Hartman
2018-10-19kbuild: add -Wno-unused-but-set-variable flag unconditionallyMasahiro Yamada
We have raised the compiler requirement from time to time. With commit cafa0010cd51 ("Raise the minimum required gcc version to 4.6"), the minimum for GCC is 4.6 now. This flag was added by GCC 4.6, and it is recognized by ICC as well. It is true that Clang does not support this flag but this commit is just touching the else part of the "ifeq ($(cc-name),clang)" check. Hence, Clang build is not affected. Let's rip off the cc-disable-warning switch, and see if somebody complains about it. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
2018-10-19kbuild: add -Wdeclaration-after-statement flag unconditionallyMasahiro Yamada
We have raised the compiler requirement from time to time. With commit cafa0010cd51 ("Raise the minimum required gcc version to 4.6"), the minimum for GCC is 4.6 now. This flag has been here since the pre-git era. It is documented in the GCC 4.6 manual, and it is recognized by Clang and ICC as well. Let's rip off the cc-option switch, and see if somebody complains about it. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Tested-by: Nick Desaulniers <ndesaulniers@google.com>
2018-10-19kbuild: add -Wno-pointer-sign flag unconditionallyMasahiro Yamada
We have raised the compiler requirement from time to time. With commit cafa0010cd51 ("Raise the minimum required gcc version to 4.6"), the minimum for GCC is 4.6 now. The -Wno-pointer-sign has been here since the pre-git era. It is documented in the GCC 4.6 manual, and it is recognized by Clang and ICC as well. Let's rip off the cc-disable-warning switch, and see if somebody complains about it. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Tested-by: Nick Desaulniers <ndesaulniers@google.com>
2018-10-15Linux 4.19-rc8Greg Kroah-Hartman