summaryrefslogtreecommitdiff
path: root/arch/arm/Kconfig.debug
AgeCommit message (Collapse)Author
2019-05-16Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds
Pull ARM SoC platform updates from Olof Johansson: "SoC updates, mostly refactorings and cleanups of old legacy platforms. Major themes this release: - Conversion of ixp4xx to a modern platform (drivers, DT, bindings) - Moving some of the ep93xx headers around to get it closer to multiplatform enabled. - Cleanups of Davinci This also contains a few patches that were queued up as fixes before 5.1 but I didn't get sent in before release" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (123 commits) ARM: debug-ll: add default address for digicolor ARM: u300: regulator: add MODULE_LICENSE() ARM: ep93xx: move private headers out of mach/* ARM: ep93xx: move pinctrl interfaces into include/linux/soc ARM: ep93xx: keypad: stop using mach/platform.h ARM: ep93xx: move network platform data to separate header ARM: stm32: add AMBA support for stm32 family MAINTAINERS: update arch/arm/mach-davinci ARM: rockchip: add missing of_node_put in rockchip_smp_prepare_pmu ARM: dts: Add queue manager and NPE to the IXP4xx DTSI soc: ixp4xx: qmgr: Add DT probe code soc: ixp4xx: qmgr: Add DT bindings for IXP4xx qmgr soc: ixp4xx: npe: Add DT probe code soc: ixp4xx: Add DT bindings for IXP4xx NPE soc: ixp4xx: qmgr: Pass resources soc: ixp4xx: Remove unused functions soc: ixp4xx: Uninline several functions soc: ixp4xx: npe: Pass addresses as resources ARM: ixp4xx: Turn the QMGR into a platform device ARM: ixp4xx: Turn the NPE into a platform device ...
2019-04-28ARM: debug-ll: add default address for digicolorArnd Bergmann
The digicolor platform has three UARTs, but the Kconfig.debug file explicitly lists port zero as the one to be used for the console, while not providing any default values. This can get an automated randconfig build stuck in a loop waiting for the user to input the number. As we already know the physical address, this patch provides that number as default, along with a reasonable default value for the virtual address. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-23ARM: fix function graph tracer and unwinder dependenciesRussell King
Naresh Kamboju recently reported that the function-graph tracer crashes on ARM. The function-graph tracer assumes that the kernel is built with frame pointers. We explicitly disabled the function-graph tracer when building Thumb2, since the Thumb2 ABI doesn't have frame pointers. We recently changed the way the unwinder method was selected, which seems to have made it more likely that we can end up with the function- graph tracer enabled but without the kernel built with frame pointers. Fix up the function graph tracer dependencies so the option is not available when we have no possibility of having frame pointers, and adjust the dependencies on the unwinder option to hide the non-frame pointer unwinder options if the function-graph tracer is enabled. Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org> Tested-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2018-12-12Merge tag 'imx-soc-4.21' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/soc i.MX SoC changes for 4.21: - An improvement on i.MX debugging options that only defines DEBUG_IMX_UART_PORT if needed, so that the option will not be present in the kernel config when DEBUG_LL is disabled. - Adds the necessary platform support for i.MX7ULP SoC and configures power mode to Partial Stop mode 3 with system/bus clock enabled. Otherwise the default STOP mode will gate off system/bus clock when WFI gets executed on i.MX7ULP. - A fix from Arnd on SOC_IMX7ULP option dependency. * tag 'imx-soc-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: imx: fix dependencies on imx7ulp ARM: imx: add initial support for imx7ulp ARM: debug-imx: only define DEBUG_IMX_UART_PORT if needed Signed-off-by: Olof Johansson <olof@lixom.net>
2018-12-10ARM: debug-imx: only define DEBUG_IMX_UART_PORT if neededUwe Kleine-König
If debugging on i.MX is enabled DEBUG_IMX_UART_PORT defines which UART is used for the debug output. If however debugging is off don't only hide the then unused config item but drop it completely by using a dependency instead of a conditional prompt. This fixes DEBUG_IMX_UART_PORT being present in the kernel config even if DEBUG_LL is disabled. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-11-30Merge tag 'socfpga_updates_for_v5.0' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into next/soc SoCFPGA updates for v5.0 - Split Kconfig options for debug UART on Cyclone5 - Remove unused functions from socfpga platform code - Turn on ARM and PL310 errata for SOCFPGA ARMv7 platform * tag 'socfpga_updates_for_v5.0' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux: ARM: socfpga: Turn on ARM errata for L2 cache ARM: socfpga: Clean unused functions ARM: debug: enable UART1 for socfpga Cyclone5 Signed-off-by: Olof Johansson <olof@lixom.net>
2018-11-28ARM: debug: enable UART1 for socfpga Cyclone5Clément Péron
Cyclone5 and Arria10 doesn't have the same memory map for UART1. Split the SOCFPGA_UART1 into 2 options to allow debugging on UART1 for Cyclone5. Signed-off-by: Clément Péron <peron.clem@gmail.com> Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
2018-11-12ARM: stm32: debug: add low-level debug supportGerald Baeza
This adds low-level debug support on USART1 for STM32F4 and STM32F7. Compiled via 'CONFIG_DEBUG_LL' and 'CONFIG_EARLY_PRINTK'. Enabled via 'earlyprintk' in bootargs. Signed-off-by: Gerald Baeza <gerald.baeza@st.com> Signed-off-by: Bich Hemon <bich.hemon@st.com> Acked-by: Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2018-10-29Merge tag 'armsoc-soc' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC platform updates from Arnd Bergmann: "A couple of platforms change hands in the MAINTAINERS file: - Linus Walleij lists himself for the ARM Reference platforms: versatile, vexpress, integrator and realview. He has been the main contributor for these for a while, and makes it official now. - Vladimir Zapolskiy takes over the LPC18xx platform from Joachim Eastwood - Manivannan Sadhasivam becomes a secondary maintainer for the Actions Semi machines - Nicolas Ferre lists updates the MAINTAINER listing for the AT91 platform: Ludovic Desroches is now a co-maintainer for the platform, and several other people (Claudiu Beznea, Cristian Birsan, Eugen Hristev, Codrin Ciubotariu) take over individual device drivers. Thanks everyone for working on this, and welcome to the new maintainers! The "virt" platform on qemy or kvm can now be used in big-endian mode without additional tricks, thanks to Jason Donenfeld. Once again, we gain support for another NXP i.MX6 variant, this time it's the i.MX 6ULZ 32-bit single-core version. On arm64, we add support for two SoCs from Renesas: RZ/G2E (r8a774c0) and RZ/G2M (r8a774a1). These are described as microcontrollers on the manufacturer website, but appear to be rather powerful. The RZ/G2M is used on the reference board for the CIP Super Long Term Support (SLTS) Linux Kernels" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (54 commits) MAINTAINERS: Assign myself as a maintainer of ARM/LPC18XX architecture arm64: exynos: Enable generic power domain support MAINTAINERS: remove non-exsiting email address of Baoyou MAINTAINERS: fix pattern in ARM/Synaptics berlin SoC section MAINTAINERS: Drop dt-bindings/genpd/k2g.h ARM: samsung: Limit SAMSUNG_PM_CHECK config option to non-Exynos platforms arm64: actions: Enable PINCTRL in platforms Kconfig MAINTAINERS: Add entry for Actions Semi Owl SoCs DMA driver MAINTAINERS: Add entry for Actions Semiconductor Owl I2C driver MAINTAINERS: Update clock binding entry for Actions Semi Owl SoCs ARM: imx: add i.mx6ulz msl support ARM: Assume maintainership of ARM reference designs ARM: support big-endian for the virt architecture MAINTAINERS: sdhci: move the Microchip entry to proper location MAINTAINERS: move former ATMEL entries to proper MICROCHIP location MAINTAINERS: remove the / ATMEL string from MICROCHIP entries MAINTAINERS: iio: add co-maintainer to SAMA5D2-compatible ADC driver MAINTAINERS: pwm: add entry for Microchip pwm driver MAINTAINERS: dmaengine: add files to Microchip dma entry MAINTAINERS: USB: change maintainer for Microchip USBA gadget driver ...
2018-10-04ARM: 8800/1: use choice for kernel unwindersStefan Agner
While in theory multiple unwinders could be compiled in, it does not make sense in practise. Use a choice to make the unwinder selection mutually exclusive and mandatory. Already before this commit it has not been possible to deselect FRAME_POINTER. Remove the obsolete comment. Furthermore, to produce a meaningful backtrace with FRAME_POINTER enabled the kernel needs a specific function prologue: mov ip, sp stmfd sp!, {fp, ip, lr, pc} sub fp, ip, #4 To get to the required prologue gcc uses apcs and no-sched-prolog. This compiler options are not available on clang, and clang is not able to generate the required prologue. Make the FRAME_POINTER config symbol depending on !clang. Suggested-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Stefan Agner <stefan@agner.ch> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2018-09-19ARM: 8788/1: ftrace: remove old mcount supportStefan Agner
Commit cafa0010cd51 ("Raise the minimum required gcc version to 4.6") raised the minimum GCC version to 4.6. Old mcount is only required for GCC versions older than 4.4.0. Hence old mcount support can be dropped too. Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2018-09-19ARM: debug-ll: Add support for r8a7744Biju Das
Enable low-level debugging support for RZ/G1N (R8A7744). RZ/G1N uses SCIF0 for the debug console. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-08-23Merge tag 'armsoc-soc' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM 32-bit SoC platform updates from Olof Johansson: "Most of the SoC updates in this cycle are cleanups and moves to more modern infrastructure: - Davinci was moved to common clock framework - OMAP1-based Amstrad E3 "Superphone" saw a bunch of cleanups to the keyboard interface (bitbanged AT keyboard via GPIO). - Removal of some stale code for Renesas platforms - Power management improvements for i.MX6LL" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (112 commits) ARM: uniphier: select RESET_CONTROLLER arm64: uniphier: select RESET_CONTROLLER ARM: uniphier: remove empty Makefile ARM: exynos: Clear global variable on init error path ARM: exynos: Remove outdated maintainer information ARM: shmobile: Always enable ARCH_TIMER on SoCs with A7 and/or A15 ARM: shmobile: r8a7779: hide unused r8a7779_platform_cpu_kill soc: r9a06g032: don't build SMP files for non-SMP config ARM: shmobile: Add the R9A06G032 SMP enabler driver ARM: at91: pm: configure wakeup sources for ULP1 mode ARM: at91: pm: add PMC fast startup registers defines ARM: at91: pm: Add ULP1 mode support ARM: at91: pm: Use ULP0 naming instead of slow clock ARM: hisi: handle of_iomap and fix missing of_node_put ARM: hisi: check of_iomap and fix missing of_node_put ARM: hisi: fix error handling and missing of_node_put ARM: mx5: Set the DBGEN bit in ARM_GPC register ARM: imx51: Configure M4IF to avoid visual artifacts ARM: imx: call imx6sx_cpuidle_init() conditionally for 6sll ARM: imx: fix i.MX6SLL build ...
2018-08-02Kconfig: consolidate the "Kernel hacking" menuChristoph Hellwig
Move the source of lib/Kconfig.debug and arch/$(ARCH)/Kconfig.debug to the top-level Kconfig. For two architectures that means moving their arch-specific symbols in that menu into a new arch Kconfig.debug file, and for a few more creating a dummy file so that we can include it unconditionally. Also move the actual 'Kernel hacking' menu to lib/Kconfig.debug, where it belongs. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-06-18ARM: debug: fix BCM2836 order entryClément Peron
Entries are sorted by their address value, except the BCM2836/KONA which are not in the proper order. Signed-off-by: Clément Peron <clement.peron@devialet.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2018-06-18ARM: debug: Add iProc UART3 debug addressesClément Peron
Broadcom iProc SoCs typically use the UART3 for debug/console, provide a known good location for that. Signed-off-by: Clément Peron <clement.peron@devialet.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2018-04-16ARM: debug-ll: Add support for r8a77470Biju Das
Enable low-level debugging support for RZ/G1C (r8a77470). RZ/G1C uses SCIF1 for the debug console. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-03-24ARM: 8747/1: make CONFIG_DEBUG_WX depend on MMUArnd Bergmann
Without CONFIG_MMU, this results in a build failure: ./arch/arm/include/asm/memory.h:92:23: error: initializer element is not constant #define VECTORS_BASE vectors_base arch/arm/mm/dump.c:32:4: note: in expansion of macro 'VECTORS_BASE' { VECTORS_BASE, "Vectors" }, arch/arm/mm/dump.c:71:11: error: 'L_PTE_USER' undeclared here (not in a function); did you mean 'VTIME_USER'? .mask = L_PTE_USER, ^~~~~~~~~~ Obviously the feature only makes sense with an MMU, so let's add the dependency here. Fixes: a8e53c151fe7 ("ARM: 8737/1: mm: dump: add checking for writable and executable") Acked-by: Laura Abbott <labbott@redhat.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2018-01-21ARM: 8737/1: mm: dump: add checking for writable and executableJinbum Park
Page mappings with full RWX permissions are a security risk. x86, arm64 has an option to walk the page tables and dump any bad pages. (1404d6f13e47 ("arm64: dump: Add checking for writable and exectuable pages")) Add a similar implementation for arm. Reviewed-by: Kees Cook <keescook@chromium.org> Tested-by: Laura Abbott <labbott@redhat.com> Reviewed-by: Laura Abbott <labbott@redhat.com> Signed-off-by: Jinbum Park <jinb.park7@gmail.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2018-01-21ARM: 8735/1: mm: dump: make page table dumping reusableJinbum Park
This patch refactors the arm page table dumping code, so multiple tables may be registered with the framework. This patch refers below commits of arm64. (4674fdb9f149 ("arm64: mm: dump: make page table dumping reusable")) (4ddb9bf83349 ("arm64: dump: Make ptdump debugfs a separate option")) Reviewed-by: Kees Cook <keescook@chromium.org> Tested-by: Laura Abbott <labbott@redhat.com> Reviewed-by: Laura Abbott <labbott@redhat.com> Signed-off-by: Jinbum Park <jinb.park7@gmail.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2017-11-26Merge branch 'fixes' of git://git.armlinux.org.uk/~rmk/linux-armLinus Torvalds
Pull ARM fixes from Russell King: - LPAE fixes for kernel-readonly regions - Fix for get_user_pages_fast on LPAE systems - avoid tying decompressor to a particular platform if DEBUG_LL is enabled - BUG if we attempt to return to userspace but the to-be-restored PSR value keeps us in privileged mode (defeating an issue that ftracetest found) * 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: BUG if jumping to usermode address in kernel mode ARM: 8722/1: mm: make STRICT_KERNEL_RWX effective for LPAE ARM: 8721/1: mm: dump: check hardware RO bit for LPAE ARM: make decompressor debug output user selectable ARM: fix get_user_pages_fast
2017-11-21ARM: make decompressor debug output user selectableRussell King
Make the decompressor debug output user selectable, otherwise merely enabling DEBUG_LL causes the decompressor to become board specific, thereby preventing a multi-platform kernel from booting. Enabling DEBUG_LL doesn't cause the kernel itself to become platform specific unless EARLY_PRINTK is enabled, or one of the debugging routines is added in a path that results in it being called. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2017-11-16Merge tag 'armsoc-soc' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC platform updates from Arnd Bergmann: "Most of the commits are for defconfig changes, to enable newly added drivers or features that people have started using. For the changed lines lines, we have mostly cleanups, the affected platforms are OMAP, Versatile, EP93xx, Samsung, Broadcom, i.MX, and Actions. The largest single change is the introduction of the TI "sysc" bus driver, with the intention of cleaning up more legacy code. Two new SoC platforms get added this time: - Allwinner R40 is a modernized version of the A20 chip, now with a Quad-Core ARM Cortex-A7. According to the manufacturer, it is intended for "Smart Hardware" - Broadcom Hurricane 2 (Aka Strataconnect BCM5334X) is a family of chips meant for managed gigabit ethernet switches, based around a Cortex-A9 CPU. Finally, we gain SMP support for two platforms: Renesas R-Car E2 and Amlogic Meson8/8b, which were previously added but only supported uniprocessor operation" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (118 commits) ARM: multi_v7_defconfig: Select RPMSG_VIRTIO as module ARM: multi_v7_defconfig: enable CONFIG_GPIO_UNIPHIER arm64: defconfig: enable CONFIG_GPIO_UNIPHIER ARM: meson: enable MESON_IRQ_GPIO in Kconfig for meson8b ARM: meson: Add SMP bringup code for Meson8 and Meson8b ARM: smp_scu: allow the platform code to read the SCU CPU status ARM: smp_scu: add a helper for powering on a specific CPU dt-bindings: Amlogic: Add Meson8 and Meson8b SMP related documentation ARM: OMAP3: Delete an unnecessary variable initialisation in omap3xxx_hwmod_init() ARM: OMAP3: Use common error handling code in omap3xxx_hwmod_init() ARM: defconfig: select the right SX150X driver arm64: defconfig: Enable QCOM_IOMMU arm64: Add ThunderX drivers to defconfig arm64: defconfig: Enable Tegra PCI controller cpufreq: imx6q: Move speed grading check to cpufreq driver arm64: defconfig: re-enable Qualcomm DB410c USB ARM: configs: stm32: Add MDMA support in STM32 defconfig ARM: imx: Enable cpuidle for i.MX6DL starting at 1.1 bus: ti-sysc: Fix unbalanced pm_runtime_enable by adding remove bus: ti-sysc: mark PM functions as __maybe_unused ...
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-30Merge tag 'arm-soc/for-4.15/soc-part2' of ↵Arnd Bergmann
http://github.com/Broadcom/stblinux into next/soc Pull "Broadcom soc changes for 4.15 (part 2)" from Florian Fainelli: This pull request contains Broadcom ARM-based SoC changes for 4.15 (second part), please pull the following: - Florian adds support for the Broadcom Hurricane 2 SoC machine entry point and defines the debug UART address for use with earlyprintk/DEBUG_LL * tag 'arm-soc/for-4.15/soc-part2' of http://github.com/Broadcom/stblinux: ARM: debug: Add Hurricane 2 UART2 debug addresses ARM: bcm: Add support for Broadcom Hurricane 2 SoC
2017-10-12ARM: debug: Add Hurricane 2 UART2 debug addressesFlorian Fainelli
Broadcom Hurricane 2 SoCs typically use their secondary UART for debug/console, provide a known good location for that. Acked-by: Jon Mason <jon.mason@broadcom.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2017-09-18ARM: debug-ll: Add support for r8a7745Fabrizio Castro
Enable low-level debugging support for RZ/G1E (r8a7745). RZ/G1E uses SCIF4 for the debug console. Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Chris Paterson <chris.paterson2@renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-08-16Merge tag 'omap-for-v4.14/debug-ll-signed' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/soc Pull "Updates to for omap debug_ll code to use generic DEBUG_UART_8250 code" from Tony Lindgren: The legacy code to try to detect the debug_ll uart based on machine is no longer needed, and we can remove it. Note that the Kconfig options stay the same, we just need to define the port configuration now. * tag 'omap-for-v4.14/debug-ll-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: debug: Use generic 8250 debug_ll for am3517 and am335x ARM: debug: Use generic 8250 debug_ll for ti81xx ARM: debug: Use generic 8250 debug_ll for omap3/4/5 ARM: debug: Use generic 8250 debug_ll for omap2 and omap3/4/5 common uarts
2017-07-27ARM: debug-ll: Add support for r8a7743Chris Paterson
Enable low-level debugging support for RZ/G1M (r8a7743). RZ/G1M uses SCIF0 for the debug console, like most of the R-Car Gen2 SoCs. Signed-off-by: Chris Paterson <chris.paterson2@renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-07-17ARM: debug: Use generic 8250 debug_ll for am3517 and am335xTony Lindgren
We want to use generic 8250 debug_ll code to get DEBUG_UNCOMPRESS working and to simplify the code. The old debug_ll code is no longer needed and the machine ID based detection is no longer used. Note that for most part there's no need to keep DEBUG_LL enabled. We now have CONFIG_SERIAL_EARLYCON working very early as long as the kernel cmdline has "earlycon" in it and the board specific dts file has chosen configured with with the port using stdout-path. Cc: Hoeun Ryu <hoeun.ryu@gmail.com> Cc: Russell King <linux@armlinux.org.uk> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-07-17ARM: debug: Use generic 8250 debug_ll for ti81xxTony Lindgren
We want to use generic 8250 debug_ll code to get DEBUG_UNCOMPRESS working and to simplify the code. The old debug_ll code is no longer needed and the machine ID based detection is no longer used. Note that for most part there's no need to keep DEBUG_LL enabled. We now have CONFIG_SERIAL_EARLYCON working very early as long as the kernel cmdline has "earlycon" in it and the board specific dts file has chosen configured with with the port using stdout-path. Cc: Hoeun Ryu <hoeun.ryu@gmail.com> Cc: Russell King <linux@armlinux.org.uk> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-07-17ARM: debug: Use generic 8250 debug_ll for omap3/4/5Tony Lindgren
We want to use generic 8250 debug_ll code to get DEBUG_UNCOMPRESS working and to simplify the code. The old debug_ll code is no longer needed and the machine ID based detection is no longer used. Note that for most part there's no need to keep DEBUG_LL enabled. We now have CONFIG_SERIAL_EARLYCON working very early as long as the kernel cmdline has "earlycon" in it and the board specific dts file has chosen configured with with the port using stdout-path. Cc: Hoeun Ryu <hoeun.ryu@gmail.com> Cc: Russell King <linux@armlinux.org.uk> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-07-17ARM: debug: Use generic 8250 debug_ll for omap2 and omap3/4/5 common uartsTony Lindgren
We want to use generic 8250 debug_ll code to get DEBUG_UNCOMPRESS working and to simplify the code. The old debug_ll code is no longer needed and the machine ID based detection is no longer used. Note that for most part there's no need to keep DEBUG_LL enabled. We now have CONFIG_SERIAL_EARLYCON working very early as long as the kernel cmdline has "earlycon" in it and the board specific dts file has chosen configured with with the port using stdout-path. Cc: Hoeun Ryu <hoeun.ryu@gmail.com> Cc: Russell King <linux@armlinux.org.uk> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-06-18Merge tag 'at91-ab-4.13-soc' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux into next/soc SoC for 4.13: - New suspend/resume mode for sama5d2 - Initial support for armv7m based SoCs * tag 'at91-ab-4.13-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: ARM: at91: remove atmel_nand_data ARM: at91: fix at91_suspend_entering_slow_clock link error ARM: at91: debug: add samv7x support ARM: at91: add armv7m SoC detection ARM: at91: handle CONFIG_PM for armv7m configurations ARM: at91: Add armv7m support ARM: at91: Document armv7m compatibles ARM: at91: Documentation: add armv7m families ARM: at91: pm: fallback to slowclock when backup mode fails ARM: at91: pm: allow selecting standby and suspend modes ARM: at91: pm: Add sama5d2 backup mode Signed-off-by: Olof Johansson <olof@lixom.net>
2017-06-18Merge tag 'qcom-soc-for-4.13' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into next/soc Qualcomm ARM Based SoC Updates for v4.13 * Add debug UART addresses for IPQ4019 * tag 'qcom-soc-for-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux: ARM: debug: qcom: add UART addresses to Kconfig help for IPQ4019 Signed-off-by: Olof Johansson <olof@lixom.net>
2017-06-05ARM: debug: qcom: add UART addresses to Kconfig help for IPQ4019Christian Lamparter
Add information about the IPQ4019 debug UART physical and virtual addresses in the DEBUG_QCOM_UARTDM Kconfig help section. Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2017-06-02ARM: at91: debug: add samv7x supportSzemző András
Add support for low level debugging on Atmel samv7x. Signed-off-by: Szemző András <sza@esh.hu> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-05-14ARM: debug: add low level debug uart for rv1108Andy Yan
RK1108 UARTs are Synopsis DesignWare 8250 compatible. Only with different register addresses. Signed-off-by: Andy Yan <andy.yan@rock-chips.com> Tested-by: Jacob Chen <jacob2.chen@rock-chips.com> [rk1108->rv1108 rename] Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2017-02-07arch: Move CONFIG_DEBUG_RODATA and CONFIG_SET_MODULE_RONX to be commonLaura Abbott
There are multiple architectures that support CONFIG_DEBUG_RODATA and CONFIG_SET_MODULE_RONX. These options also now have the ability to be turned off at runtime. Move these to an architecture independent location and make these options def_bool y for almost all of those arches. Signed-off-by: Laura Abbott <labbott@redhat.com> Acked-by: Ingo Molnar <mingo@kernel.org> Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Kees Cook <keescook@chromium.org>
2016-09-15Merge tag 'renesas-soc-for-v4.9' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/soc Pull "Renesas ARM Based SoC Updates for v4.9" from Simon Horman: Clean-up: * Only use smp_init when SMP is selected Enablement: * Add debug-ll support for r8a7992 * tag 'renesas-soc-for-v4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: ARM: shmobile: r8a7791: only use smp_init when SMP is selected ARM: shmobile: r8a7790: only use smp_init when SMP is selected ARM: debug-ll: Add support for r8a7992
2016-08-17ARM: debug-ll: Add support for r8a7992Geert Uytterhoeven
Enable low-level debugging support for R-Car V2H (r8a7792). V2H uses SCIF0 for the debug console, like most other R-Car Gen2 SoCs. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-08-08ARM: brcmstb: Add earlyprintk support using run-time checksFlorian Fainelli
The SUN_TOP_CTRL_FAMILY_ID register is at a fixed absolute address for all of our supported chips, so utilize its value to determine what the UARTA base address should be based on the value we read. Since the code is called both during decompressor when the MMU is off, and after the MMU has been turned on in the kernel, and we want to do the lookup only once, we use the same technique as tegra.S and have a shared storage location between the decompressor and the kernel. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2016-07-07Merge tag 'arm-soc/for-4.8/soc-part2' of http://github.com/Broadcom/stblinux ↵Arnd Bergmann
into next/soc Merge "the second part of the Broadcom ARM-based SoC changes" from Florian Fainelli: - Florian updates the DEBUG_UART_BCM5301X entry to cover both NS and NSP SoCs since they both have the same location * tag 'arm-soc/for-4.8/soc-part2' of http://github.com/Broadcom/stblinux: ARM: debug: Enable DEBUG_BCM_5301X for Northstar Plus SoCs
2016-07-06ARM: debug: Enable DEBUG_BCM_5301X for Northstar Plus SoCsFlorian Fainelli
Northstar Plus SoCs (ARCH_BCM_NSP) have the exact same UART location and properties like the register shift of 0, so make it usable. Acked-by: Jon Mason <jon.mason@broadcom.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2016-06-10ARM: at91: debug: add default DEBUG_LL addressesAlexandre Belloni
Add configuration options for the most commonly used UART physical and virtual addresses to ease the use of DEBUG_LL and earlyprintk. Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-06-10ARM: at91: debug: use DEBUG_UART_VIRTAlexandre Belloni
AT91 still uses an offset (0x0100 0000) from the physical address to map the debug UART. This is unfortunate as for some platforms (sama5d3 and earlier), it ends up in the PCI zone and PCI is enabled in multi_v7. Switch to DEBUG_UART_VIRT to solve that. Tested on sama5d3 and 9g20. Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-04-26ARM: debug: remove extraneous DEBUG_HI3716_UART optionArnd Bergmann
DEBUG_HI3716_UART was supposed to be renamed to DEBUG_HIX5HD2_UART, but accidentally both got left in place, which results in a build error when CONFIG_DEBUG_UART_PHYS is not set as it should be. This removes the old symbol. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: 12aae3097454 ("ARM: debug: Rename Hi3716 to HIX5HD2") Acked-by: Wei Xu <xuwei5@hisilicon.com>
2016-02-08ARM: debug: add support for Palmchip BK-310x UARTMans Rullgard
Some SoCs use a Palmchip BK-310x UART which is mostly 16550 compatible but with a different register layout. While this UART has previously only been supported in MIPS based chips (Alchemy, Ralink), the ARM based SMP87xx series from Sigma Designs also uses it. This patch allows the debug console to work with this type of UART. Signed-off-by: Mans Rullgard <mans@mansr.com> Signed-off-by: Marc Gonzalez <marc_gonzalez@sigmadesigns.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2016-01-22Merge tag 'armsoc-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Olof Johansson: "A few fixes for fallout that we didn't catch in time in -next, or smaller warning fixes that have been discovered since" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: soc: qcom/spm: shut up uninitialized variable warning ARM: realview: fix device tree build ARM: debug-ll: fix BCM63xx entry for multiplatform ARM: dts: armadillo800eva Correct extal1 frequency to 24 MHz
2016-01-20Merge tag 'armsoc-soc' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC platform updates from Olof Johansson: "Updates for new platform support: - New platform: Tango4 from Sigma Designs. - Broadcom BCM2836 (Raspberry Pi 2 SoC) - Enable cpufreq on Freescale i.MX7D - Rockchip: SMP support for rk3036, general support for rk3228 - SMP support on Broadcom Kona and NSP - Cleanups for OMAP removing legacy IOMMU data + a bunch of misc fixes and tweaks for various platforms" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (46 commits) ARM: tango: Fix UP build issues ARM: tango: pass ARM arch level for smc.S ARM: bcm2835: Add Kconfig support for bcm2836 ARM: OMAP2+: Add support for dm814x and dra62x usb ARM: OMAP2+: Add mmc hwmod entries for dm814x ARM: OMAP2+: Update 81xx clock and power domains for default, active and sgx ARM: OMAP2+: Fix SoC detection for dra62x j5-eco ARM: tango4: Initial platform support ARM: bcm2835: Add a compat string for bcm2836 machine probe dt-bindings: Add root properties for Raspberry Pi 2 ARM: imx: select SRC for i.MX7 ARM: uniphier: select PINCTRL ARM: OMAP2+: Remove device creation for omap-pcm-audio ARM: OMAP1: Remove device creation for omap-pcm-audio ARM: rockchip: enable support for RK3228 SoCs ARM: rockchip: use const and __initconst for rk3036 smp_operations ARM: zynq: Select ARCH_HAS_RESET_CONTROLLER ARM: BCM: Add SMP support for Broadcom 4708 ARM: BCM: Add SMP support for Broadcom NSP ARM: BCM: Clean up SMP support for Broadcom Kona ...