summaryrefslogtreecommitdiff
path: root/arch/arm/Makefile
AgeCommit message (Collapse)Author
2014-08-08Merge tag 'soc-for-3.17' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC platform changes from Olof Johansson: "This is the bulk of new SoC enablement and other platform changes for 3.17: - Samsung S5PV210 has been converted to DT and multiplatform - Clock drivers and bindings for some of the lower-end i.MX 1/2 platforms - Kirkwood, one of the popular Marvell platforms, is folded into the mvebu platform code, removing mach-kirkwood - Hwmod data for TI AM43xx and DRA7 platforms - More additions of Renesas shmobile platform support - Removal of plat-samsung contents that can be removed with S5PV210 being multiplatform/DT-enabled and the other two old platforms being removed New platforms (most with only basic support right now): - Hisilicon X5HD2 settop box chipset is introduced - Mediatek MT6589 (mobile chipset) is introduced - Broadcom BCM7xxx settop box chipset is introduced + as usual a lot other pieces all over the platform code" * tag 'soc-for-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (240 commits) ARM: hisi: remove smp from machine descriptor power: reset: move hisilicon reboot code ARM: dts: Add hix5hd2-dkb dts file. ARM: debug: Rename Hi3716 to HIX5HD2 ARM: hisi: enable hix5hd2 SoC ARM: hisi: add ARCH_HISI MAINTAINERS: add entry for Broadcom ARM STB architecture ARM: brcmstb: select GISB arbiter and interrupt drivers ARM: brcmstb: add infrastructure for ARM-based Broadcom STB SoCs ARM: configs: enable SMP in bcm_defconfig ARM: add SMP support for Broadcom mobile SoCs Documentation: arm: misc updates to Marvell EBU SoC status Documentation: arm: add URLs to public datasheets for the Marvell Armada XP SoC ARM: mvebu: fix build without platforms selected ARM: mvebu: add cpuidle support for Armada 38x ARM: mvebu: add cpuidle support for Armada 370 cpuidle: mvebu: add Armada 38x support cpuidle: mvebu: add Armada 370 support cpuidle: mvebu: rename the driver from armada-370-xp to mvebu-v7 ARM: mvebu: export the SCU address ...
2014-08-08Merge tag 'cleanup-for-3.17' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC cleanups from Olof Johansson: "This merge window brings a good size of cleanups on various platforms. Among the bigger ones: - Removal of Samsung s5pc100 and s5p64xx platforms. Both of these have lacked active support for quite a while, and after asking around nobody showed interest in keeping them around. If needed, they could be resurrected in the future but it's more likely that we would prefer reintroduction of them as DT and multiplatform-enabled platforms instead. - OMAP4 controller code register define diet. They defined a lot of registers that were never actually used, etc. - Move of some of the Tegra platform code (PMC, APBIO, fuse, powergate) to drivers/soc so it can be shared with 64-bit code. This also converts them over to traditional driver models where possible. - Removal of legacy gpio-samsung driver, since the last users have been removed (moved to pinctrl) Plus a bunch of smaller changes for various platforms that sort of dissapear in the diffstat for the above. clps711x cleanups, shmobile header file refactoring/moves for multiplatform friendliness, some misc cleanups, etc" * tag 'cleanup-for-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (117 commits) drivers: CCI: Correct use of ! and & video: clcd-versatile: Depend on ARM video: fix up versatile CLCD helper move MAINTAINERS: Add sdhci-st file to ARCH/STI architecture ARM: EXYNOS: Fix build breakge with PM_SLEEP=n MAINTAINERS: Remove Kirkwood ARM: tegra: Convert PMC to a driver soc/tegra: fuse: Set up in early initcall ARM: tegra: Always lock the CPU reset vector ARM: tegra: Setup CPU hotplug in a pure initcall soc/tegra: Implement runtime check for Tegra SoCs soc/tegra: fuse: fix dummy functions soc/tegra: fuse: move APB DMA into Tegra20 fuse driver soc/tegra: Add efuse and apbmisc bindings soc/tegra: Add efuse driver for Tegra ARM: tegra: move fuse exports to soc/tegra/fuse.h ARM: tegra: export apb dma readl/writel ARM: tegra: Use a function to get the chip ID ARM: tegra: Sort includes alphabetically ARM: tegra: Move includes to include/soc/tegra ...
2014-07-30ARM: hisi: add ARCH_HISIHaojian Zhuang
Since multiple ARCH configuration will be appended into mach-hisi directory, add ARCH_HISI as common configuration for different platforms in mach-hisi. Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org> Acked-by: Wei Xu <xuwei5@hisilicon.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-07-26Merge tag 's5pv210-dt' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/soc Merge "Samsung S5PV210 DT support for v3.17" from Kukjin Kim: - support common clock framework for s5pv210 clock - add generic PHY driver on s5pv210 to support it via DT - add dt support for s5pv210-goni, smdkc110, smdkv210 and torbreck boards - remove board files from mach-s5pv210 and unused codes - enable multiplatform for s5pv210 * tag 's5pv210-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: clk: samsung: s5pv210: Remove legacy board support ARM: SAMSUNG: Remove remaining legacy code gpio: samsung: Remove legacy support of S5PV210 ARM: S5PV210: Enable multi-platform build support cpufreq: s5pv210: Make the driver multiplatform aware ARM: S5PV210: Register cpufreq platform device ARM: S5PV210: move debug-macro.S into the common space ARM: S5PV210: Untie PM support from legacy code ARM: S5PV210: Remove support for board files ARM: dts: Add Device tree for s5pc110/s5pv210 boards ARM: dts: Add Device tree for s5pv210 SoC ARM: S5PV210: Add board file for boot using Device Tree phy: Add support for S5PV210 to the Exynos USB 2.0 PHY driver clk: samsung: Add S5PV210 Audio Subsystem clock driver ARM: SAMSUNG: Remove legacy clock code serial: samsung: Remove support for legacy clock code cpufreq: s3c24xx: Remove some dead code ARM: S5PV210: Migrate clock handling to Common Clock Framework clk: samsung: Add clock driver for S5PV210 and compatible SoCs Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-07-26Merge branches 'samsung/cleanup' and 'samsung/s5p-cleanup-v2', tag ↵Arnd Bergmann
'v3.16-rc6' into next/soc The following samsung branches are based on these cleanups, which are already in mainline before this branch gets pulled. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-07-23Merge tag 'v3.17-next-mediatek-support' of ↵Arnd Bergmann
https://github.com/mbgg/linux-mediatek into next/soc Merge basic support for the Mediatek Cortex-A7 SoCs from Matthias Brugger: Support is quite basic, as the only component working up to now are the timers. * tag 'v3.17-next-mediatek-support' of https://github.com/mbgg/linux-mediatek: arm: mediatek: add dts for Aquaris5 mobile phone dt-bindings: add documentation for Mediatek SoC arm: add basic support for Mediatek MT6589 boards Signed-off-by: Matthias Brugger matthias.bgg@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-07-22arm: add basic support for Mediatek MT6589 boardsMatthias Brugger
This adds a generic devicetree board file and a dtsi for boards based on MT6589 SoCs from Mediatek. Apart from the generic parts (gic, clocks) the only component currently supported are the timers. Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2014-07-19ARM: S5PV210: Enable multi-platform build supportTomasz Figa
This makes it possible to enable the s5pv210 platform as part of a multiplatform kernel. Also redundant Kconfig options are removed. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-07-18ARM: 8096/1: Describe required sort order for textofs-y (TEXT_OFFSET)Daniel Thompson
The section of the makefile that determines the TEXT_OFFSET is sorted by address so that, in multi-arch kernel builds, the architecture with the most stringent requirements for the kernel base address gets to define TEXT_OFFSET. The comment should reflect that. Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-07-13ARM: Kirkwood: Remove mach-kirkwoodAndrew Lunn
Now that all boards have been converted to DT and all the support code lives in mach-mvebu, we can remove mach-kirkwood. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Link: https://lkml.kernel.org/r/1405028192-9623-2-git-send-email-andrew@lunn.ch Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-07-13ARM: S5PC100: no more support S5PC100 SoCKukjin Kim
This patch removes supporting codes for s5pc100 because no more used now. [jason@lakedaemon.net: for drivers/irqchip/Kconfig] Acked-by: Jason Cooper <jason@lakedaemon.net> Acked-by: Arnd Bergmann <arnd@arndb.de> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-07-08ARM: S5P64X0: no more support S5P6440 and S5P6450 SoCsKukjin Kim
This patch removes supporting codes for s5p6440 and s5p6450 because seems no more used now. And if its supporting is required, DT based codes should be supprted next time. Acked-by: Arnd Bergmann <arnd@arndb.de> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-05-23ARM: Add platform support for LSI AXM55xx SoCAnders Berg
The AXM55xx family consists of devices that may contain up to 16 ARM Cortex-A15 cores (in a 4x4 cluster configuration). The cores within each cluster share an L2 cache, and the clusters are connected to each other via a CCN-504 cache coherent interconnect. This machine requires CONFIG_ARM_LPAE enabled as all peripherals are located above 4GB in the memory map. Signed-off-by: Anders Berg <anders.berg@lsi.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-04-05Merge tag 'cleanup-3.15' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC cleanups from Arnd Bergmann: "These cleanup patches are mainly move stuff around and should all be harmless. They are mainly split out so that other branches can be based on top to avoid conflicts. Notable changes are: - We finally remove all mach/timex.h, after CLOCK_TICK_RATE is no longer used (Uwe Kleine-König) - The Qualcomm MSM platform is split out into legacy mach-msm and new-style mach-qcom, to allow easier maintainance of the new hardware support without regressions (Kumar Gala) - A rework of some of the Kconfig logic to simplify multiplatform support (Rob Herring) - Samsung Exynos gets closer to supporting multiplatform (Sachin Kamat and others) - mach-bcm3528 gets merged into mach-bcm (Stephen Warren) - at91 gains some common clock framework support (Alexandre Belloni, Jean-Jacques Hiblot and other French people)" * tag 'cleanup-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (89 commits) ARM: hisi: select HAVE_ARM_SCU only for SMP ARM: efm32: allow uncompress debug output ARM: prima2: build reset code standalone ARM: at91: add PWM clock ARM: at91: move sam9261 SoC to common clk ARM: at91: prepare common clk transition for sam9261 SoC ARM: at91: updated the at91_dt_defconfig with support for the ADS7846 ARM: at91: dt: sam9261: Device Tree support for the at91sam9261ek ARM: at91: dt: defconfig: Added the sam9261 to the list of DT-enabled SOCs ARM: at91: dt: Add at91sam9261 dt SoC support ARM: at91: switch sam9rl to common clock framework ARM: at91/dt: define main clk frequency of at91sam9rlek ARM: at91/dt: define at91sam9rl clocks ARM: at91: prepare common clk transition for sam9rl SoCs ARM: at91: prepare sam9 dt boards transition to common clk ARM: at91: dt: sam9rl: Device Tree for the at91sam9rlek ARM: at91/defconfig: Add the sam9rl to the list of DT-enabled SOCs ARM: at91: Add at91sam9rl DT SoC support ARM: at91: prepare at91sam9rl DT transition ARM: at91/defconfig: refresh at91sam9260_9g20_defconfig ...
2014-03-11Merge tag 'bcm2835-for-3.15-soc' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-rpi into next/cleanup Merge "ARM: bcm2835: consolidate into mach-bcm/" from Stephen Warren: This pull request consists of a single patch which moves files from arch/arm/mach-bcm2835 into mach-bcm, thus consolidating them with support for other Broadcom chips. * tag 'bcm2835-for-3.15-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-rpi: ARM: bcm2835: Move to mach-bcm directory Signed-off-by: Olof Johansson <olof@lixom.net>
2014-02-28Merge tag 'kconfig-cleanup-for-3.15' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux into next/cleanup Merge "kconfig clean-up and mach-virt removal for 3.15" from Rob Herring - Remove common kconfig options required by multi-platform builds out of individual platforms as they are redundant. - Make SMP, CACHE_L2X0 and GPIO config options user visible on multi-platform builds as most platforms enable these options and all platforms can run with them enabled. - Make multi-platform v6 default to more optimal v6k rather than v6 - Remove the last bit of mach-virt and convert it to just a kconfig option. * tag 'kconfig-cleanup-for-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: ARM: virt: select ARM_AMBA ARM: virt: make mach-virt just a kconfig option ARM: vt8500: enable V6K instead of plain V6 ARM: cns3xxx: enable V6K instead of plain V6 ARM: bcm2835: enable V6K instead of plain V6 ARM: Select V6K instead of V6 by default for multi-platform ARM: select MIGHT_HAVE_CACHE_L2X0 for V6 and V7 multi-platform ARM: select HAVE_SMP for V7 multi-platform ARM: centralize common multi-platform kconfig options Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-02-24ARM: bcm2835: Move to mach-bcm directoryMarkus Mayer
Move the bcm2835 board file into the mach-bcm directory. This allows us to get rid of the mach-bcm2835 directory with the associated Kconfig and Makefile. Signed-off-by: Markus Mayer <markus.mayer@linaro.org> [swarren, adjust defconfig so ARCH_BCM2835 still gets enabled] Signed-off-by: Stephen Warren <swarren@wwwdotorg.org>
2014-02-20kbuild: dtbs_install: new make targetJason Cooper
Unlike other build products in the Linux kernel, there is no 'make *install' mechanism to put devicetree blobs in a standard place. This commit adds a new 'dtbs_install' make target which copies all of the dtbs into the INSTALL_DTBS_PATH directory. INSTALL_DTBS_PATH can be set before calling make to change the default install directory. If not set then it defaults to: $INSTALL_PATH/dtbs/$KERNELRELEASE. This is done to keep dtbs from different kernel versions separate until things have settled down. Once the dtbs are stable, and not so strongly linked to the kernel version, the devicetree files will most likely move to their own repo. Users will need to upgrade install scripts at that time. v7: (reworked by Grant Likely) - Moved rules from arch/arm/Makefile to arch/arm/boot/dts/Makefile so that each dtb install could have a separate target and be reported as part of the make output. - Fixed dependency problem to ensure $KERNELRELEASE is calculated before attempting to install - Removed option to call external script. Copying the files should be sufficient and a build system can post-process the install directory. Despite the fact an external script is used for installing the kernel, I don't think that is a pattern that should be encouraged. I would rather see buildroot type tools post process the install directory to rename or move dtb files after installing to a staging directory. - Plus it is easy to add a hook after the fact without blocking the rest of this feature. - Move the helper targets into scripts/Makefile.lib with the rest of the common dtb rules Signed-off-by: Jason Cooper <jason@lakedaemon.net> Signed-off-by: Grant Likely <grant.likely@linaro.org> Cc: Michal Marek <mmarek@suse.cz> Cc: Russell King <linux@arm.linux.org.uk> Cc: Rob Herring <robh+dt@kernel.org>
2014-02-19ARM: virt: make mach-virt just a kconfig optionRob Herring
The mach code for mach-virt is no longer needed, so we can remove all of mach-virt except the kconfig entry. Signed-off-by: Rob Herring <robh@kernel.org> Cc: Russell King <linux@arm.linux.org.uk> Acked-by: Marc Zyngier <marc.zyngier@arm.com>
2014-02-06ARM: qcom: Split Qualcomm support into legacy and multiplatformKumar Gala
Introduce a new mach-qcom that will support SoCs that intend to be multiplatform compatible while keeping mach-msm to legacy SoC/board support that will not transition over to multiplatform. As part of this, we move support for MSM8X60, MSM8960 and MSM8974 over to mach-qcom. Signed-off-by: Kumar Gala <galak@codeaurora.org>
2014-01-28Merge branches 'fixes' and 'misc' into for-linusRussell King
2014-01-28ARM: fix building with gcc 4.6.4Russell King
GCC fails to build the kernel if EABI is selected, and the default FPU is selected. Avoid this by explicitly stating that we want VFP with EABI. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-01-23Merge tag 'drivers-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM driver updates from Olof Johansson: "Updates of SoC-near drivers and other driver updates that makes more sense to take through our tree. The largest part of this is a conversion of device registration for some renesas shmobile/sh devices over to use resources. This has required coordination with the corresponding arch/sh changes, and we've agreed to merge the arch/sh changes through our tree. Added in this branch is support for Trusted Foundations secure firmware, which is what is used on many of the commercial Nvidia Tegra products that are in the market, including the Nvidia Shield. The code is local to arch/arm at this time since it's uncertain whether it will be shared with arm64 longer-term, if needed we will refactor later. A couple of new RTC drivers used on ARM boards, merged through our tree on request by the RTC maintainer. ... plus a bunch of smaller updates across the board, gpio conversions for davinci, etc" * tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (45 commits) watchdog: davinci: rename platform driver to davinci-wdt tty: serial: Limit msm_serial_hs driver to platforms that use it mmc: msm_sdcc: Limit driver to platforms that use it usb: phy: msm: Move mach dependent code to platform data clk: versatile: fixup IM-PD1 clock implementation clk: versatile: pass a name to ICST clock provider ARM: integrator: pass parent IRQ to the SIC irqchip: versatile FPGA: support cascaded interrupts from DT gpio: davinci: don't create irq_domain in case of unbanked irqs gpio: davinci: use chained_irq_enter/chained_irq_exit API gpio: davinci: add OF support gpio: davinci: remove unused variable intc_irq_num gpio: davinci: convert to use irqdomain support. gpio: introduce GPIO_DAVINCI kconfig option gpio: davinci: get rid of DAVINCI_N_GPIO gpio: davinci: use {readl|writel}_relaxed() instead of __raw_* serial: sh-sci: Add OF support serial: sh-sci: Add device tree bindings documentation serial: sh-sci: Remove platform data mapbase and irqs fields serial: sh-sci: Remove platform data scbrr_algo_id field ...
2014-01-23Merge tag 'soc-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC platform changes from Olof Johansson: "New core SoC-specific changes. New platforms: * Introduction of a vendor, Hisilicon, and one of their SoCs with some random numerical product name. * Introduction of EFM32, embedded platform from Silicon Labs (ARMv7m, i.e. !MMU). * Marvell Berlin series of SoCs, which include the one in Chromecast. * MOXA platform support, ARM9-based platform used mostly in industrial products * Support for Freescale's i.MX50 SoC. Other work: * Renesas work for new platforms and drivers, and conversion over to more multiplatform-friendly device registration schemes. * SMP support for Allwinner sunxi platforms. * ... plus a bunch of other stuff across various platforms" * tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (201 commits) ARM: tegra: fix tegra_powergate_sequence_power_up() inline ARM: msm_defconfig: Update for multi-platform ARM: msm: Move MSM's DT based hardware to multi-platform support ARM: msm: Only build timer.c if required ARM: msm: Only build clock.c on proc_comm based platforms ARM: ux500: Enable system suspend with WFI support ARM: ux500: turn on PRINTK_TIME in u8500_defconfig ARM: shmobile: r8a7790: Fix I2C controller names ARM: msm: Simplify ARCH_MSM_DT config ARM: msm: Add support for MSM8974 SoC ARM: sunxi: select ARM_PSCI MAINTAINERS: Update Allwinner sunXi maintainer files ARM: sunxi: Select RESET_CONTROLLER ARM: imx: improve the comment of CCM lpm SW workaround ARM: imx: improve status check of clock gate ARM: imx: add necessary interface for pfd ARM: imx_v6_v7_defconfig: Select CONFIG_REGULATOR_PFUZE100 ARM: imx_v6_v7_defconfig: Select MX35 and MX50 device tree support ARM: imx: Add cpu frequency scaling support ARM i.MX35: Add devicetree support. ...
2014-01-08Merge branch 'hisi/soc' into next/socKevin Hilman
* hisi/soc: ARM: dts: rename hi4511 dts file ARM: hisi: remove init_time ARM: hisi: rename hi3xxx to hisi ARM: dts: enable clock binding on Hi3620 ARM: hi3xxx: add hotplug support ARM: hi3xxx: add smp support ARM: config: add defconfig for Hi3xxx ARM: config: enable hi3xxx in multi_v7_defconfig ARM: dts: enable hi4511 with device tree ARM: hi3xxx: add board support with device tree Signed-off-by: Kevin Hilman <khilman@linaro.org>
2014-01-02Merge tag 'renesas-sh-sci3-for-v3.14' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/drivers From Simon Horman: Third Round of Renesas SH SCI Updates for v3.14 * Add Device Tree Support * Remove platform data mapbase and irqs fields * Remove platform data scbrr_algo_id field * tag 'renesas-sh-sci3-for-v3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: serial: sh-sci: Add OF support serial: sh-sci: Add device tree bindings documentation serial: sh-sci: Remove platform data mapbase and irqs fields serial: sh-sci: Remove platform data scbrr_algo_id field Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-22ARM: moxart: add MOXA ART SoC platform filesJonas Jensen
The MOXA ART SoC is based on Faraday's FA526. This is a ARMv4 32-bit 192 MHz CPU with MMU and 16KB/8KB D/I-cache. Add platform support for this SoC. Also add UC-7112-LX as a machine. Signed-off-by: Jonas Jensen <jonas.jensen@gmail.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-20Merge tag 'renesas-soc-for-v3.14' of ↵Kevin Hilman
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/soc From Simon Horman: Renesas ARM based SoC updates for v3.14 * Rename ARCH_SHMOBILE to ARCH_SHMOBILE_LEGACY * r8a7791 SoC (R-Car M2) - Add thermal platform device - Add DU and LVDS clocks - GPIO platform device support - PFC platform device support - Select IRQC * r8a7790 SoC (R-Car H2) - Tidyup clock table order - Fixup I2C clock source - Correct EXTAL divider settings - Add clocks for thermal devices and SSI * r8a7779 SoC (R-Car H1) - Add I2C clock for DT * r8a7778 SoC (R-Car M1) - Add HSPI clocks for DT - Add I2C clock for DT - Add HPBIFx DMAEngine support * r8a7740 SoC (R-Mobile A1) - Add FSI clocks for DT * emev2 SoC (Emma Mobile) - Move to Multi-platform - Remove legacy board code * r7s72100 SoC (RZ/A1H) - Select GPIO * r8a73a4 SoC (R-Mobile APE6) - Don't used named IRC for DMAEngine * tag 'renesas-soc-for-v3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (33 commits) ARM: shmobile: r8a7779: add HSPI clock support for DT ARM: shmobile: r8a7740: add FSI clock support for DT ARM: shmobile: r8a7790: add SSI MSTP clocks ARM: shmobile: r8a7778: add HPBIFx DMAEngine support ARM: shmobile: Select AUTO_ZRELADDR for EMEV2 ARM: shmobile: r8a7790: tidyup clock table order ARM: shmobile: r8a7790: fixup I2C clock source ARM: shmobile: r8a7790: care EXTAL divider settings ARM: shmobile: Add r8a7791 clocks for thermal devices ARM: shmobile: Add r8a7791 thermal platform device ARM: shmobile: Add r8a7790 clocks for thermal devices ARM: Rename ARCH_SHMOBILE to ARCH_SHMOBILE_LEGACY ARM: shmobile: r8a7791: Add DU and LVDS clocks ARM: shmobile: Select USE_OF on EMEV2 ARM: shmobile: r8a7778: add HSPI clock support for DT ARM: shmobile: Remove legacy platform devices from EMEV2 SoC code ARM: shmobile: Remove legacy KZM9D board code ARM: shmobile: Use ->init_late() in shared EMEV2 case ARM: shmobile: Add shared EMEV2 code for ->init_machine() ARM: shmobile: Enable MTU2 on r7s72100 ... Signed-off-by: Kevin Hilman <khilman@linaro.org>
2013-12-20Merge branch 'efm32/soc' into next/socKevin Hilman
From Uwe Kleine-König: * efm32/soc: (1003 commits) ARM: device trees for Energy Micro's EFM32 Cortex-M3 SoCs ARM: new platform for Energy Micro's EFM32 Cortex-M3 SoCs +Linux 3.13-rc4 Signed-off-by: Kevin Hilman <khilman@linaro.org>
2013-12-20ARM: hisi: rename hi3xxx to hisiHaojian Zhuang
Since some new Hisilicon SoCs are not named as hi3xxx, rename mach-hi3xxx to mach-hisi instead. And the pronounciation of "hisi" is similar to the chinese pronounciation of Hisilicon. So Hisilicon guys like this name. ARCH_HI3xxx will be renamed later since other drivers are using it and they are still in linux-next git tree. So rename ARCH_HI3xxx later. Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com> Signed-off-by: Kevin Hilman <khilman@linaro.org>
2013-12-20stackprotector: Unify the HAVE_CC_STACKPROTECTOR logic between architecturesKees Cook
Instead of duplicating the CC_STACKPROTECTOR Kconfig and Makefile logic in each architecture, switch to using HAVE_CC_STACKPROTECTOR and keep everything in one place. This retains the x86-specific bug verification scripts. Signed-off-by: Kees Cook <keescook@chromium.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Michal Marek <mmarek@suse.cz> Cc: Russell King <linux@arm.linux.org.uk> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul Mundt <lethal@linux-sh.org> Cc: James Hogan <james.hogan@imgtec.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Shawn Guo <shawn.guo@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-mips@linux-mips.org Cc: linux-arch@vger.kernel.org Link: http://lkml.kernel.org/r/1387481759-14535-2-git-send-email-keescook@chromium.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-12-17ARM: hi3xxx: add board support with device treeHaojian Zhuang
Add board support with device tree for Hisilicon Hi3620 SoC platform. Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org> [khilman: fix checkpatch errors] [khilman: fold in patch which selects GPIO in Kconfig] Signed-off-by: Kevin Hilman <khilman@linaro.org>
2013-12-16ARM: new platform for Energy Micro's EFM32 Cortex-M3 SoCsUwe Kleine-König
There are still some missing parts (e.g. board support, device trees), but with these bits added on top of this patch I can successfully boot a EFM32GG-DK3750 board that uses an EFM32GG990F1024. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2013-12-13ARM: add basic support for Trusted FoundationsAlexandre Courbot
Trusted Foundations is a TrustZone-based secure monitor for ARM that can be invoked using the same SMC-based API on supported platforms. This patch adds initial basic support for Trusted Foundations using the ARM firmware API. Current features are limited to the ability to boot secondary processors. Note: The API followed by Trusted Foundations does *not* follow the SMC calling conventions. It has nothing to do with PSCI neither and is only relevant to devices that use Trusted Foundations (like most Tegra-based retail devices). Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Reviewed-by: Tomasz Figa <t.figa@samsung.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-12-13ARM: add initial support for Marvell Berlin SoCsSebastian Hesselbarth
This adds initial support for the Marvell Berlin SoC family with Armada 1500 (88DE3100) and Armada 1500-mini (88DE3005) SoCs. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Reviewed-by: Jason Cooper <jason@lakedaemon.net> Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de>
2013-12-10ARM: Rename ARCH_SHMOBILE to ARCH_SHMOBILE_LEGACYLaurent Pinchart
SH-Mobile platforms are transitioning from non-multiplatform to multiplatform kernel. A new ARCH_SHMOBILE_MULTI configuration symbol has been created to group all multiplatform-enabled SH-Mobile SoCs. The existing ARCH_SHMOBILE configuration symbol groups SoCs that haven't been converted yet. This arrangement works fine for the arch/ code, but lots of drivers needed on both ARCH_SHMOBILE and ARCH_SHMOBILE_MULTI depend on ARCH_SHMOBILE only. In order to avoid changing them, rename ARCH_SHMOBILE to ARCH_SHMOBILE_LEGACY, and create a new boolean ARCH_SHMOBILE configuration symbol that is selected by both ARCH_SHMOBILE_LEGACY and ARCH_SHMOBILE_MULTI. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-11-14Merge branch 'for-linus' of git://git.linaro.org/people/rmk/linux-armLinus Torvalds
Pull ARM updates from Russell King: "Included in this series are: 1. BE8 (modern big endian) changes for ARM from Ben Dooks 2. big.Little support from Nicolas Pitre and Dave Martin 3. support for LPAE systems with all system memory above 4GB 4. Perf updates from Will Deacon 5. Additional prefetching and other performance improvements from Will. 6. Neon-optimised AES implementation fro Ard. 7. A number of smaller fixes scattered around the place. There is a rather horrid merge conflict in tools/perf - I was never notified of the conflict because it originally occurred between Will's tree and other stuff. Consequently I have a resolution which Will forwarded me, which I'll forward on immediately after sending this mail. The other notable thing is I'm expecting some build breakage in the crypto stuff on ARM only with Ard's AES patches. These were merged into a stable git branch which others had already pulled, so there's little I can do about this. The problem is caused because these patches have a dependency on some code in the crypto git tree - I tried requesting a branch I can pull to resolve these, and all I got each time from the crypto people was "we'll revert our patches then" which would only make things worse since I still don't have the dependent patches. I've no idea what's going on there or how to resolve that, and since I can't split these patches from the rest of this pull request, I'm rather stuck with pushing this as-is or reverting Ard's patches. Since it should "come out in the wash" I've left them in - the only build problems they seem to cause at the moment are with randconfigs, and since it's a new feature anyway. However, if by -rc1 the dependencies aren't in, I think it'd be best to revert Ard's patches" I resolved the perf conflict roughly as per the patch sent by Russell, but there may be some differences. Any errors are likely mine. Let's see how the crypto issues work out.. * 'for-linus' of git://git.linaro.org/people/rmk/linux-arm: (110 commits) ARM: 7868/1: arm/arm64: remove atomic_clear_mask() in "include/asm/atomic.h" ARM: 7867/1: include: asm: use 'int' instead of 'unsigned long' for 'oldval' in atomic_cmpxchg(). ARM: 7866/1: include: asm: use 'long long' instead of 'u64' within atomic.h ARM: 7871/1: amba: Extend number of IRQS ARM: 7887/1: Don't smp_cross_call() on UP devices in arch_irq_work_raise() ARM: 7872/1: Support arch_irq_work_raise() via self IPIs ARM: 7880/1: Clear the IT state independent of the Thumb-2 mode ARM: 7878/1: nommu: Implement dummy early_paging_init() ARM: 7876/1: clear Thumb-2 IT state on exception handling ARM: 7874/2: bL_switcher: Remove cpu_hotplug_driver_{lock,unlock}() ARM: footbridge: fix build warnings for netwinder ARM: 7873/1: vfp: clear vfp_current_hw_state for dying cpu ARM: fix misplaced arch_virt_to_idmap() ARM: 7848/1: mcpm: Implement cpu_kill() to synchronise on powerdown ARM: 7847/1: mcpm: Factor out logical-to-physical CPU translation ARM: 7869/1: remove unused XSCALE_PMU Kconfig param ARM: 7864/1: Handle 64-bit memory in case of 32-bit phys_addr_t ARM: 7863/1: Let arm_add_memory() always use 64-bit arguments ARM: 7862/1: pcpu: replace __get_cpu_var_uses ARM: 7861/1: cacheflush: consolidate single-CPU ARMv7 cache disabling code ...
2013-11-12Merge branch 'devel-stable' into for-nextRussell King
Conflicts: arch/arm/include/asm/atomic.h arch/arm/include/asm/hardirq.h arch/arm/kernel/smp.c
2013-11-11Merge tag 'cleanup-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC cleanups from Olof Johansson: "This branch contains code cleanups, moves and removals for 3.13. Qualcomm msm targets had a bunch of code removal for legacy non-DT platforms. Nomadik saw more device tree conversions and cleanup of old code. Tegra has some code refactoring, etc. One longish patch series from Sebastian Hasselbarth changes the init_time hooks and tries to use a generic implementation for most platforms, since they were all doing more or less the same things. Finally the "shark" platform is removed in this release. It's been abandoned for a while and nobody seems to care enough to keep it around. If someone comes along and wants to resurrect it, the removal can easily be reverted and code brought back. Beyond this, mostly a bunch of removals of stale content across the board, etc" * tag 'cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (79 commits) ARM: gemini: convert to GENERIC_CLOCKEVENTS ARM: EXYNOS: remove CONFIG_MACH_EXYNOS[4, 5]_DT config options ARM: OMAP3: control: add API for setting IVA bootmode ARM: OMAP3: CM/control: move CM scratchpad save to CM driver ARM: OMAP3: McBSP: do not access CM register directly ARM: OMAP3: clock: add API to enable/disable autoidle for a single clock ARM: OMAP2: CM/PM: remove direct register accesses outside CM code MAINTAINERS: Add patterns for DTS files for AT91 ARM: at91: remove init_machine() as default is suitable ARM: at91/dt: split sama5d3 peripheral definitions ARM: at91/dt: split sam9x5 peripheral definitions ARM: Remove temporary sched_clock.h header ARM: clps711x: Use linux/sched_clock.h MAINTAINERS: Add DTS files to patterns for Samsung platform ARM: EXYNOS: remove unnecessary header inclusions from exynos4/5 dt machine file ARM: tegra: fix ARCH_TEGRA_114_SOC select sort order clk: nomadik: fix missing __init on nomadik_src_init ARM: drop explicit selection of HAVE_CLK and CLKDEV_LOOKUP ARM: S3C64XX: Kill CONFIG_PLAT_S3C64XX ASoC: samsung: Use CONFIG_ARCH_S3C64XX to check for S3C64XX support ...
2013-10-19ARM: set --be8 when linking modulesBen Dooks
To avoid having to make every text section swap the instruction order of all instructions, make sure modules are built also built with --be8 (as is the current kernel final link). If we do not do this, we would end up having to swap all instructions when loading a module, instead of just the instructions that we are applying ELF relocations to. Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Reviewed-by: Dave Martin <Dave.Martin@arm.com>
2013-10-02arm, kbuild: make "make install" not depend on vmlinuxRobert Richter
Install targets (install, zinstall, uinstall) on arm have a dependency to vmlinux. This may cause parts of the kernel to be rebuilt during installation. We must avoid this since this may run as root. Install targets "ABSOLUTELY MUST NOT MODIFY THE SOURCE TREE." as Linus emphasized this in: http://lkml.org/lkml/2013/7/10/600 So on arm and maybe other archs we need the same as for x86: 1648e4f8 x86, kbuild: make "make install" not depend on vmlinux This patch fixes this for arm. Dependencies are removed and instead a check to install.sh is added for the files that are needed. This issue was uncovered by this build error where the -j option is used in conjunction with install targets: $ make <makeflags> $ make <makeflags> zinstall ... DEPMOD Usage: .../scripts/depmod.sh /sbin/depmod <kernelrelease> (INSTALL_MOD_PATH and INSTALL_PATH variables set, so no root perms required in this case.) The problem is that zinstall on arm due to its dependency to vmlinux does a prepare/prepare3 and finally does a forced rewrite of kernel.release even if it exists already. Rebuilding kernel.release removes it first and then recreates it. This might race with another parallel make job running depmod. So this patch should fix this one too. Also quoting $(KERNELRELEASE) arg for install.sh as this messes argument order in case it is empty (which is the case if the kernel was not built yet). Signed-off-by: Robert Richter <robert.richter@linaro.org> Signed-off-by: Robert Richter <rric@kernel.org> Acked-by: Michal Marek <mmarek@suse.cz>. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Signed-off-by: Michal Marek <mmarek@suse.cz>
2013-09-17ARM: delete mach-sharkLinus Walleij
The Shark machine sub-architecture (also known as DNARD, the DIGITAL Network Appliance Reference Design) lacks a maintainer able to apply and test patches to modernize the architecture. It is suspected that the current kernel, while it compiles, does not even boot on this machine. The listed maintainer has expressed that he will not be able to spend any time on the maintenance for the coming year. So let's delete it from the kernel for now. It can always be resurrected with git revert if maintenance is resumed. As the VIA82c505 PCI adapter was only used by this architecture, that gets deleted too. Cc: arm@kernel.org Cc: Alexander Schulz <alex@shark-linux.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-08-14Merge branch 'zynq/dt' into next/dtKevin Hilman
* zynq/dt: (1054 commits) arm: zynq: dt: Set correct L2 ram latencies + v3.11-rc5 Conflicts: arch/arm/Makefile
2013-07-27ARM: Fix sorting of machine- initializersRussell King
So, there's a comment I put at the top of this, which people seem to fail to read. So let's fix it for them instead. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-23ARM: shmobile: Introduce ARCH_SHMOBILE_MULTIMagnus Damm
Add ARCH_SHMOBILE_MULTI to mach-shmobile that can be used to enable ARCH_MULTIPLATFORM on selected SoCs and boards. The headers stay under arch/arm/mach-shmobile/include/mach/ for now, they can and will be migrated independently over time. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-07-03Merge branch 'for-linus' of git://git.linaro.org/people/rmk/linux-armLinus Torvalds
Pull ARM updates from Russell King: "This contains the usual updates from other people (listed below) and the usual random muddle of miscellaneous ARM updates which cover some low priority bug fixes and performance improvements. I've started to put the pull request wording into the merge commits, which are: - NoMMU stuff: This includes the following series sent earlier to the list: - nommu-fixes - R7 Support - MPU support I've left out the ARCH_MULTIPLATFORM/!MMU stuff that Arnd and I were discussing today until we've reached a conclusion/that's had some more review. This is rebased (and re-tested) on your devel-stable branch because otherwise there were going to be conflicts with Uwe's V7M work now that you've merged that. I've included the fix for limiting MPU to CPU_V7. - Huge page support These changes bring both HugeTLB support and Transparent HugePage (THP) support to ARM. Only long descriptors (LPAE) are supported in this series. The code has been tested on an Arndale board (Exynos 5250). - LPAE updates Please pull these miscellaneous LPAE fixes I've been collecting for a while now for 3.11. They've been tested and reviewed by quite a few people, and most of the patches are pretty trivial. -- Will Deacon. - arch_timer cleanups Please pull these arch_timer cleanups I've been holding onto for a while. They're the same as my last posting, but have been rebased to v3.10-rc3. - mpidr linearisation (multiprocessor id register - identifies which CPU number we are in the system) This patch series that implements MPIDR linearization through a simple hashing algorithm and updates current cpu_{suspend}/{resume} code to use the newly created hash structures to retrieve context pointers. It represents a stepping stone for the implementation of power management code on forthcoming multi-cluster ARM systems. It has been tested on TC2 (dual cluster A15xA7 system), iMX6q, OMAP4 and Tegra, with processors hitting low-power states requiring warm-boot resume through the cpu_resume code path" * 'for-linus' of git://git.linaro.org/people/rmk/linux-arm: (77 commits) ARM: 7775/1: mm: Remove do_sect_fault from LPAE code ARM: 7777/1: Avoid extra calls to the C compiler ARM: 7774/1: Fix dtb dependency to use order-only prerequisites ARM: 7770/1: remove residual ARMv2 support from decompressor ARM: 7769/1: Cortex-A15: fix erratum 798181 implementation ARM: 7768/1: prevent risks of out-of-bound access in ASID allocator ARM: 7767/1: let the ASID allocator handle suspended animation ARM: 7766/1: versatile: don't mark pen as __INIT ARM: 7765/1: perf: Record the user-mode PC in the call chain. ARM: 7735/2: Preserve the user r/w register TPIDRURW on context switch and fork ARM: kernel: implement stack pointer save array through MPIDR hashing ARM: kernel: build MPIDR hash function data structure ARM: mpu: Ensure that MPU depends on CPU_V7 ARM: mpu: protect the vectors page with an MPU region ARM: mpu: Allow enabling of the MPU via kconfig ARM: 7758/1: introduce config HAS_BANDGAP ARM: 7757/1: mm: don't flush icache in switch_mm with hardware broadcasting ARM: 7751/1: zImage: don't overwrite ourself with a page table ARM: 7749/1: spinlock: retry trylock operation if strex fails on free lock ARM: 7748/1: oabi: handle faults when loading swi instruction from userspace ...
2013-07-02Merge tag 'late-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC late changes from Arnd Bergmann: "These are changes that arrived a little late before the merge window or that have multiple dependencies on previous branches so they did not fit into one of the earlier ones. There are 10 branches merged here, a total of 39 non-merge commits. Contents are a mixed bag for the above reasons: * Two new SoC platforms: ST microelectronics stixxxx and the TI 'Nspire' graphing calculator. These should have been in the 'soc' branch but were a little late * Support for the Exynos 5420 variant in mach-exynos, which is based on the other exynos branches to avoid conflicts. * Various small changes for sh-mobile, ux500 and davinci * Common clk support for MSM" * tag 'late-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (39 commits) ARM: ux500: bail out on alien cpus ARM: davinci: da850: adopt to pinctrl-single change for configuring multiple pins serial: sh-sci: Initialise variables before access in sci_set_termios() ARM: stih41x: Add B2020 board support ARM: stih41x: Add B2000 board support ARM: sti: Add DEBUG_LL console support ARM: sti: Add STiH416 SOC support ARM: sti: Add STiH415 SOC support ARM: msm: Migrate to common clock framework ARM: msm: Make proc_comm clock control into a platform driver ARM: msm: Prepare clk_get() users in mach-msm for clock-pcom driver ARM: msm: Remove clock-7x30.h include file ARM: msm: Remove custom clk_set_{max,min}_rate() API ARM: msm: Remove custom clk_set_flags() API msm: iommu: Use clk_set_rate() instead of clk_set_min_rate() msm: iommu: Convert to clk_prepare/unprepare msm_sdcc: Convert to clk_prepare/unprepare usb: otg: msm: Convert to clk_prepare/unprepare msm_serial: Use devm_clk_get() and properly return errors msm_serial: Convert to clk_prepare/unprepare ...
2013-07-02Merge tag 'soc-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC specific changes from Arnd Bergmann: "These changes are all to SoC-specific code, a total of 33 branches on 17 platforms were pulled into this. Like last time, Renesas sh-mobile is now the platform with the most changes, followed by OMAP and EXYNOS. Two new platforms, TI Keystone and Rockchips RK3xxx are added in this branch, both containing almost no platform specific code at all, since they are using generic subsystem interfaces for clocks, pinctrl, interrupts etc. The device drivers are getting merged through the respective subsystem maintainer trees. One more SoC (u300) is now multiplatform capable and several others (shmobile, exynos, msm, integrator, kirkwood, clps711x) are moving towards that goal with this series but need more work. Also noteworthy is the work on PCI here, which is traditionally part of the SoC specific code. With the changes done by Thomas Petazzoni, we can now more easily have PCI host controller drivers as loadable modules and keep them separate from the platform code in drivers/pci/host. This has already led to the discovery that three platforms (exynos, spear and imx) are actually using an identical PCIe host controller and will be able to share a driver once support for spear and imx is added." * tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (480 commits) ARM: integrator: let pciv3 use mem/premem from device tree ARM: integrator: set local side PCI addresses right ARM: dts: Add pcie controller node for exynos5440-ssdk5440 ARM: dts: Add pcie controller node for Samsung EXYNOS5440 SoC ARM: EXYNOS: Enable PCIe support for Exynos5440 pci: Add PCIe driver for Samsung Exynos ARM: OMAP5: voltagedomain data: remove temporary OMAP4 voltage data ARM: keystone: Move CPU bringup code to dedicated asm file ARM: multiplatform: always pick one CPU type ARM: imx: select syscon for IMX6SL ARM: keystone: select ARM_ERRATA_798181 only for SMP ARM: imx: Synertronixx scb9328 needs to select SOC_IMX1 ARM: OMAP2+: AM43x: resolve SMP related build error dmaengine: edma: enable build for AM33XX ARM: edma: Add EDMA crossbar event mux support ARM: edma: Add DT and runtime PM support to the private EDMA API dmaengine: edma: Add TI EDMA device tree binding arm: add basic support for Rockchip RK3066a boards arm: add debug uarts for rockchip rk29xx and rk3xxx series arm: Add basic clocks for Rockchip rk3066a SoCs ...
2013-06-29Merge branch 'devel-stable' into for-nextRussell King
Conflicts: arch/arm/Makefile arch/arm/include/asm/glue-proc.h
2013-06-29Merge branches 'fixes', 'mcpm', 'misc' and 'mmci' into for-nextRussell King