summaryrefslogtreecommitdiff
path: root/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts
AgeCommit message (Collapse)Author
2021-12-21ARM: dts: aspeed: p10: Add TPM deviceEddie James
Add the Nuvoton NPCT75X, a TIS I2C TPM. Modified Eddie's change to include the general compatible string, and combine the rainier and everest patches. Signed-off-by: Eddie James <eajames@linux.ibm.com> Link: https://lore.kernel.org/r/20211208191758.20517-8-eajames@linux.ibm.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-12-21ARM: dts: aspeed: p10: Enable USB host portsEddie James
Ensure both controllers are enabled on, and add GPIO hog for USB power control to set the USB power to always on. Signed-off-by: Eddie James <eajames@linux.ibm.com> Link: https://lore.kernel.org/r/20211208170641.13322-1-eajames@linux.ibm.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-10-21ARM: dts: aspeed: p10bmc: Enable KCS channel 2Andrew Jeffery
Rainier uses KCS channel 2 as the source for the debug-trigger application outlined at [1] and implemented at [2]. [1] https://github.com/openbmc/docs/blob/master/designs/bmc-service-failure-debug-and-recovery.md [2] https://github.com/openbmc/debug-trigger Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Link: https://lore.kernel.org/r/20210623033854.587464-8-andrew@aj.id.au Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-10-21ARM: dts: aspeed: p10bmc: Use KCS 3 for MCTP bindingAndrew Jeffery
The MCTP LPC driver was loaded by hacking up the compatible in the devicetree node for KCS 4. With the introduction of the raw KCS driver this hack is no-longer required. Use the regular compatible string for KCS 4 and configure the appropriate SerIRQ. The reset state of the status bits on KCS 4 is inappropriate for the MCTP LPC binding. Switch to KCS 3 which has a different reset behaviour. Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-10-21ARM: dts: aspeed: everest: Fix bus 15 muxed eepromsEddie James
The eeproms on bus 15 muxes were at the wrong addresses. Signed-off-by: Eddie James <eajames@linux.ibm.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20211020215321.33960-6-eajames@linux.ibm.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-10-21ARM: dts: aspeed: everest: Add IBM Operation Panel I2C deviceEddie James
Set I2C bus 14 to multi-master mode and add the panel device that will register the I2C controller as a slave device. In addition, in early Everest systems, the panel device was behind an I2C switch, which doesn't work for slave mode. Get it working (albeit unreliably, since a master transaction might switch the switch at any moment) by defaulting the switch channel to the one with the panel. Signed-off-by: Eddie James <eajames@linux.ibm.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20211020215321.33960-5-eajames@linux.ibm.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-10-21ARM: dts: aspeed: everest: Add I2C switch on bus 8Eddie James
The switch controls two busses containing some VRMs. Signed-off-by: Eddie James <eajames@linux.ibm.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20211020215321.33960-4-eajames@linux.ibm.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-10-21ARM: dts: aspeed: rainier and everest: Remove PCA gpio specificationEddie James
Specifying gpio nodes under PCA led controllers no longer does anything, so remove those nodes in the device trees. Signed-off-by: Eddie James <eajames@linux.ibm.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20211020215321.33960-3-eajames@linux.ibm.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-10-21ARM: dts: aspeed: p10bmc: Fix ADC iio-hwmon battery node nameEddie James
In keeping with previous systems, call the iio-hwmon bridge node "iio-hwmon-battery" to distinguish it as the battery voltage sensor. Signed-off-by: Eddie James <eajames@linux.ibm.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20211020215321.33960-2-eajames@linux.ibm.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-10-08ARM: dts: aspeed: p10bmc: Define secure boot gpioJoel Stanley
Input pin that indicates that the BMC is configured to boot with security protections enforced. Pulled up by default (secure). Placing the jumper will pull the pin down (bypass security). When in the secure boot state, it makes the EEPROM at 0x50 on bus 14 read only. Link: https://lore.kernel.org/r/20210923074606.283393-1-joel@jms.id.au Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-09-22ARM: dts: aspeed: Add ADC for AST2600 and enable for Rainier and EverestEddie James
Add the ADC nodes to the AST2600 devicetree. Enable ADC1 for Rainier and Everest systems and add an iio-hwmon node for the 7th channel to report the battery voltage. Tested on Rainier: ~# cat /sys/class/hwmon/hwmon11/in1_input 1347 Signed-off-by: Eddie James <eajames@linux.ibm.com> Link: https://lore.kernel.org/r/20210916210045.31769-1-eajames@linux.ibm.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-09-22ARM: dts: everest: Define name for gpio line B6Ben Tyner
gpio-line-names B6 set to checkstop Signed-off-by: Ben Tyner <ben.tyner@ibm.com> Reviewed-by: Eddie James <eajames@linux.ibm.com> Link: https://lore.kernel.org/r/20210920150549.6431-4-bentyner@linux.ibm.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-09-22ARM: dts: everest: Define name for gpio line Q2Ben Tyner
gpio-line-names Q2 set to regulator-standby-faulted Signed-off-by: Ben Tyner <ben.tyner@ibm.com> Reviewed-by: Eddie James <eajames@linux.ibm.com> Link: https://lore.kernel.org/r/20210920150549.6431-3-bentyner@linux.ibm.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-09-14ARM: dts: everest: Add 'factory-reset-toggle' as GPIOF6Isaac Kurth
The state of this GPIO determines whether a factory reset has been requested. If a physical switch is used, it can be high or low. During boot, the software checks and records the state of this switch. If it is different than the previous recorded state, then the read-write portions of memory are reformatted. Signed-off-by: Isaac Kurth <isaac.kurth@ibm.com> Link: https://lore.kernel.org/r/20210901185236.558771-1-isaac.kurth@ibm.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-09-14ARM: dts: aspeed: everest: Add I2C bus 15 muxesEddie James
Add the muxes that are attached on I2C bus 15. Signed-off-by: Eddie James <eajames@linux.ibm.com> Link: https://lore.kernel.org/r/20210903214836.48286-3-eajames@linux.ibm.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-08-26arm/arm64: dts: Fix remaining dtc 'unit_address_format' warningsRob Herring
Fix all the remaining dtc 'unit_address_format' warnings except for the ones related to 'register-bit-led'. For those, we need to decide on and document the node name. Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20210823165126.2320910-1-robh@kernel.org' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-08-17ARM: dts: aspeed: p10bmc: Add power control pinsJim Wright
Add to p10bmc systems the GPIO line names used in chassis power on / off control and chassis power good monitoring. Names used are as documented at [1]. [1] https://github.com/openbmc/docs/blob/master/designs/device-tree-gpio-naming.md Signed-off-by: Jim Wright <jlwright@us.ibm.com> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Link: https://lore.kernel.org/r/20210816160002.18645-1-jlwright@us.ibm.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-07-28ARM: dts: rainier, everest: Add TPM reset GPIOJoel Stanley
The GPIO is used to place the BMC-connected TPM in reset. This state is latched until the BMC is next reset, blocking access to the TPM for that boot. On both machines this net is called TPM_RESET_LATCH_B. Signed-off-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Link: https://lore.kernel.org/r/20210727033319.473152-2-joel@jms.id.au
2021-07-19ARM: dts: everest: Add phase corrections for eMMCAndrew Jeffery
The values were determined via scope measurements. With the patch we can write and read data without issue where as booting the system without the patch failed at the point of mounting the rootfs. Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Link: https://lore.kernel.org/r/20210712233642.3119722-1-andrew@aj.id.au Fixes: faffd1b2bde3 ("ARM: dts: everest: Add phase corrections for eMMC") Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-07-01ARM: dts: aspeed: everest: PSU #3 address changeB. J. Wyman
The third power supply had an I2C address conflict with another device in the system. The device will have the address changed from 6Ah to 6Dh. Signed-off-by: B. J. Wyman <bjwyman@gmail.com> Reviewed-by: Eddie James <eajames@linux.ibm.com> Link: https://lore.kernel.org/r/20210610202940.3650554-1-bjwyman@gmail.com Fixes: d66d720b64e5 ("ARM: dts: aspeed: everest: Add power supply i2c devices") Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-07-01ARM: dts: everest: Add phase corrections for eMMCAndrew Jeffery
The values were determined experimentally via boot tests, not by measuring the bus behaviour with a scope. We plan to do scope measurements to confirm or refine the values and will update the devicetree if necessary once these have been obtained. However, with the patch we can write and read data without issue, where as booting the system without the patch failed at the point of mounting the rootfs. Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Link: https://lore.kernel.org/r/20210628013605.1257346-1-andrew@aj.id.au Fixes: 2fc88f92359d ("mmc: sdhci-of-aspeed: Expose clock phase controls") Fixes: a5c5168478d7 ("ARM: dts: aspeed: Add Everest BMC machine") Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-06-07ARM: dts: aspeed: everest: Add pcie cable card indicator ledsVishwanatha Subbanna
These are leds on the IBM proprietary PCIE cards called cable cards. Cable cards have 2 ports on them and each port has an indicator led. Signed-off-by: Vishwanatha Subbanna <vishwa@linux.vnet.ibm.com> Signed-off-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20210607031259.475020-7-joel@jms.id.au
2021-06-07ARM: dts: aspeed: everest: Add vrm and other indicator ledsVishwanatha Subbanna
This commit adds indicator leds for vrms, processors, opencapi connectors, tpm, planar, power distribution card and dasd backplane and are driven by PIC16F882. Signed-off-by: Vishwanatha Subbanna <vishwa@linux.vnet.ibm.com> Signed-off-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20210607031259.475020-6-joel@jms.id.au
2021-06-07ARM: dts: aspeed: everest: Add dimm indicator ledsVishwanatha Subbanna
These are dimm indicator leds driven by PIC16F882. Signed-off-by: Vishwanatha Subbanna <vishwa@linux.vnet.ibm.com> Signed-off-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20210607031259.475020-5-joel@jms.id.au
2021-06-07ARM: dts: aspeed: everest: Add pcie slot indicator ledsVishwanatha Subbanna
These are pcie slot indicator leds driven by PCA9552. Signed-off-by: Vishwanatha Subbanna <vishwa@linux.vnet.ibm.com> Signed-off-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20210607031259.475020-4-joel@jms.id.au
2021-06-07ARM: dts: aspeed: everest: Add nvme and fan indicator ledsVishwanatha Subbanna
These are the indicator leds for nvme slots and fans and are driven by PCA9552. Signed-off-by: Vishwanatha Subbanna <vishwa@linux.vnet.ibm.com> Signed-off-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20210607031259.475020-3-joel@jms.id.au
2021-06-07ARM: dts: aspeed: everest: Add system level indicator ledsVishwanatha Subbanna
These are the system level indicator leds that are driven by PCA9551 connected to the Operator Panel. Signed-off-by: Vishwanatha Subbanna <vishwa@linux.vnet.ibm.com> Signed-off-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20210607031259.475020-2-joel@jms.id.au
2021-06-04ARM: dts: aspeed: Everest: Add directly controlled LEDsVishwanatha Subbanna
These LEDs are directly connected to the BMC's GPIO bank Signed-off-by: Eddie James <eajames@linux.ibm.com> Signed-off-by: Vishwanatha Subbanna <vishwa@linux.vnet.ibm.com> Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-06-04ARM: dts: aspeed: Everest: Fix cable card PCA chipsSantosh Puranik
Correct two PCA chips which were placed on the wrong I2C bus and address. Signed-off-by: Eddie James <eajames@linux.ibm.com> Signed-off-by: Santosh Puranik <santosh.puranik@in.ibm.com> Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-04-08ARM: dts: aspeed: everest: Add size/address cellsJoel Stanley
The gpio and fan nodes reg properties cause dtc to emit a noisy warning about relying on default sizes. Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-04-08ARM: dts: aspeed: everest: Enable fan watchdogEddie James
Set watchdog 1 to pulse the fan watchdog circuit that drives the FAULT pin of the MAX31785, resulting in fans running at full speed, if at any point the BMC stops pulsing it, such as a BMC reboot at runtime. Enable watchdog 2 for BMC reboots. Signed-off-by: Matthew Barth <msbarth@linux.ibm.com> Signed-off-by: Eddie James <eajames@linux.ibm.com> Link: https://lore.kernel.org/r/20210329150020.13632-21-eajames@linux.ibm.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-04-08ARM: dts: aspeed: everest: Add RTCEddie James
Add the RTC at the appropriate I2C bus and address. Signed-off-by: Eddie James <eajames@linux.ibm.com> Link: https://lore.kernel.org/r/20210329150020.13632-20-eajames@linux.ibm.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-04-08ARM: dts: aspeed: everest: GPIOs supportAlpana Kumari
This commit adds support for- - Presence GPIOs - I2C control GPIOs - Op-panel GPIOs (ex PHR) Signed-off-by: Alpana Kumari <alpankum@in.ibm.com> Signed-off-by: Eddie James <eajames@linux.ibm.com> Reviewed-by: Brandon Wyman <bjwyman@gmail.com> Link: https://lore.kernel.org/r/20210329150020.13632-19-eajames@linux.ibm.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-04-08ARM: dts: aspeed: everest: Add UCD90320 power sequencerJim Wright
Add UCD90320 chip to Everest device tree. Signed-off-by: Jim Wright <jlwright@us.ibm.com> Signed-off-by: Eddie James <eajames@linux.ibm.com> Link: https://lore.kernel.org/r/20210329150020.13632-18-eajames@linux.ibm.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-04-08ARM: dts: aspeed: everest: Add power supply i2c devicesBrandon Wyman
Add the i2c/pmbus power supply devices to the everest device tree. Signed-off-by: Brandon Wyman <bjwyman@gmail.com> Signed-off-by: Eddie James <eajames@linux.ibm.com> Link: https://lore.kernel.org/r/20210329150020.13632-17-eajames@linux.ibm.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-04-08ARM: dts: aspeed: everest: Add pca9552 fan presenceMatthew Barth
Add the pca9552 at address 0x61 on i2c14 behind mux0 channel 3 with the 4 GPIO fan presence inputs. Signed-off-by: Matthew Barth <msbarth@us.ibm.com> Signed-off-by: Eddie James <eajames@linux.ibm.com> Reviewed-by: Brandon Wyman <bjwyman@gmail.com> Link: https://lore.kernel.org/r/20210329150020.13632-16-eajames@linux.ibm.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-04-08ARM: dts: aspeed: everest: Add FSI CFAMs and re-number enginesEddie James
Add additional CFAMs and re-number the existing engines for the extra processors present on the Everest system. Signed-off-by: Eddie James <eajames@linux.ibm.com> Link: https://lore.kernel.org/r/20210329150020.13632-15-eajames@linux.ibm.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-04-08ARM: dts: aspeed: everest: Add max31785 fan controller deviceMatthew Barth
Add the max31785 configuration at address 0x52 on i2c14 behind mux0 channel 3. Signed-off-by: Matthew Barth <msbarth@us.ibm.com> Signed-off-by: Eddie James <eajames@linux.ibm.com> Link: https://lore.kernel.org/r/20210329150020.13632-14-eajames@linux.ibm.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-04-08ARM: dts: aspeed: everest: Add I2C componentsPriyanga Ramasamy
Tested and able to bound the devices with i2c driver. Signed-off-by: Priyanga Ramasamy <priyanga24@in.ibm.com> Signed-off-by: Eddie James <eajames@linux.ibm.com> Link: https://lore.kernel.org/r/20210329150020.13632-13-eajames@linux.ibm.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-02-09ARM: dts: aspeed: Add Everest BMC machineEddie James
Add the Everest machine powered by an AST2600 chip. Copy the basic configuration from Rainier. Signed-off-by: Eddie James <eajames@linux.ibm.com> Tested-by: Andrew Geissler <geissonator@gmail.com> Link: https://lore.kernel.org/r/20201211170704.27640-1-eajames@linux.ibm.com Signed-off-by: Joel Stanley <joel@jms.id.au>
generated by cgit (git 2.34.1) at 2025-03-17 01:27:46 +0000