summaryrefslogtreecommitdiff
path: root/arch/arm/boot/dts/exynos3250-artik5.dtsi
AgeCommit message (Collapse)Author
2019-06-24ARM: dts: exynos: Add GPU/Mali 400 node to Exynos3250Krzysztof Kozlowski
Add nodes for GPU (Mali 400) to Exynos3250. This is still limited and not tested: 1. No dynamic voltage and frequency scaling, 2. Not sure what to do with CLK_G3D clock responsible for gating entire IP block (it is now being disabled as unused). Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2018-11-18ARM: dts: exynos: Add all CPUs in cooling mapsViresh Kumar
Each CPU can (and does) participate in cooling down the system but the DT only captures a handful of them, normally CPU0, in the cooling maps. Things work by chance currently as under normal circumstances its the first CPU of each cluster which is used by the operating systems to probe the cooling devices. But as soon as this CPU ordering changes and any other CPU is used to bring up the cooling device, we will start seeing failures. Also the DT is rather incomplete when we list only one CPU in the cooling maps, as the hardware doesn't have any such limitations. Update cooling maps to include all devices affected by individual trip points. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2018-09-10ARM: dts: exynos: Disable pull control for PMIC IRQ line on Artik5 boardMarek Szyprowski
S2MPS14 PMIC interrupt line on Exynos3250-based Artik5 evaluation board has external pull-up resistors, so disable any pull control for it in controller node. This fixes support for S2MPS14 PMIC interrupts and enables operation of wakeup from S2MPS14 RTC alarm. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2018-02-12ARM: dts: exynos: Add support for wlan to Artik 5Michael Lyle
On the Artik 520 module, there is a bcm4354 attached to mshc_1. Enable it and turn on the regulator used for it, so that both WiFi & Bluetooth will work. Verified to work on the Artik 520 evaluation board. Signed-off-by: Michael Lyle <mlyle@lyle.org> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2018-01-03ARM: dts: exynos: Add SPDX license identifiersKrzysztof Kozlowski
Replace GPL v2.0 license statements with SPDX license identifiers. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2017-10-20arm: dts: fix unit-address leading 0sRob Herring
Fix dtc warnings for 'simple_bus_reg' due to leading 0s. Converted using the following command: perl -p -i -e 's/\@0+([0-9a-f])/\@$1/g' `find arch/arm/boot/dts -type -f -name '*.dts*' Dropped changes to ARM, Ltd. boards LED nodes and manually fixed up some occurrences of uppercase hex. Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2017-07-18ARM: dts: exynos: Remove num-slots from exynos platformsShawn Lin
dwmmc driver deprecated num-slots and plan to get rid of it finally. Just move a step to cleanup it from DT. Cc: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2016-11-09ARM: dts: exynos: Replace "clock-freq-min-max" with "max-frequency"Jaehoon Chung
In drivers/mmc/core/host.c, there is a "max-frequency" property. Behavior should not change, so use the "max-frequency" instead of "clock-freq-min-max". Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2016-09-01ARM: dts: exynos: Add missing unit name to memory nodes in Exynos3 DTSJavier Martinez Canillas
This patch fixes the following DTC warnings: "Node /memory has a reg or ranges property, but no unit name" Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2016-09-01ARM: dts: exynos: Remove skeleton.dtsi usage for Exynos3Javier Martinez Canillas
The skeleton.dtsi file was removed in ARM64 for different reasons as explained in commit ("3ebee5a2e141 arm64: dts: kill skeleton.dtsi"). These also applies to ARM and it will also allow to get rid of the following DTC warnings in the future: "Node /memory has a reg or ranges property, but no unit name" The disassembled DTB are almost the same besides an empty chosen node being removed and nodes reordered, so it should not have functional changes. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2016-04-01ARM: dts: exynos: Add exynos3250-artik5 dtsi file for ARTIK5 moduleChanwoo Choi
This patch adds the Device Tree source for Samsung ARTIK5 module[1] based on Exynos3250 SoC. The ARTIK5 module includes the following devices: - Application Processor (Samsung Exynos3250) - WiFi/BT Combo chip (Broadcom4354) - PMIC (Samsung S2MPS14) - eMMC (4GB) - DRAM LPDDR3 (512MB) - Connectors pin (60 Pins x 3 set) Also, this patch adds the ARTIK5 evaluation board[2] dts file which includes the ARTIK5 module[1] and have the devices such as sound codec, sd card port, ethernet port, uart port and so on. [1] https://www.artik.io/hardware/artik-5 [2] http://www.digikey.com/product-search/en?FV=ffecca14 Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Andi Shyti <andi.shyti@samsung.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>