summaryrefslogtreecommitdiff
path: root/arch/arm/boot/dts/exynos4412-odroidx.dts
AgeCommit message (Collapse)Author
2023-06-21ARM: dts: Move .dts files to vendor sub-directoriesRob Herring
The arm dts directory has grown to 1559 boards which makes it a bit unwieldy to maintain and use. Past attempts stalled out due to plans to move .dts files out of the kernel tree. Doing that is no longer planned (any time soon at least), so let's go ahead and group .dts files by vendors. This move aligns arm with arm64 .dts file structure. There's no change to dtbs_install as the flat structure is maintained on install. The naming of vendor directories is roughly in this order of preference: - Matching original and current SoC vendor prefix/name (e.g. ti, qcom) - Current vendor prefix/name if still actively sold (SoCs which have been aquired) (e.g. nxp/imx) - Existing platform name for older platforms not sold/maintained by any company (e.g. gemini, nspire) The whole move was scripted with the exception of MAINTAINERS and a few makefile fixups. Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Michal Simek <michal.simek@amd.com> #Xilinx Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Neil Armstrong <neil.armstrong@linaro.org> Acked-by: Paul Barker <paul.barker@sancloud.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com> Acked-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Wei Xu <xuwei5@hisilicon.com> #hisilicon Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Nick Hawkins <nick.hawkins@hpe.com> Acked-by: Baruch Siach <baruch@tkos.co.il> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Acked-by: Peter Rosin <peda@axentia.se> Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> Acked-by: Sudeep Holla <sudeep.holla@arm.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> #broadcom Acked-by: Manivannan Sadhasivam <mani@kernel.org> Reviewed-by: Jisheng Zhang <jszhang@kernel.org> Acked-by: Patrice Chotard <patrice.chotard@foss.st.com> Acked-by: Romain Perier <romain.perier@gmail.com> Acked-by: Alexandre TORGUE <alexandre.torgue@st.com> Acked-by: Shawn Guo <shawnguo@kernel.org> Acked-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Acked-by: Enric Balletbo i Serra <eballetbo@gmail.com> Signed-off-by: Rob Herring <robh@kernel.org>
2023-01-26ARM: dts: exynos: use lowercase hex addressesKrzysztof Kozlowski
By convention the hex addresses should be lowercase. Link: https://lore.kernel.org/r/20230125094513.155063-7-krzysztof.kozlowski@linaro.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2022-06-22ARM: dts: exynos: add function and color to LED nodes in Odroid X/X2Krzysztof Kozlowski
Add common LED properties - the function and color - to LED nodes in Exynos4412 Odroid X/X2, so we can drop in some places deprecated label property. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20220620175716.132143-6-krzysztof.kozlowski@linaro.org
2022-04-04ARM: dts: exynos: fix compatible strings for Ethernet USB devicesOleksij Rempel
Fix compatible string for Ethernet USB device as required by USB device schema: Documentation/devicetree/bindings/usb/usb-device.yaml The textual representation of VID and PID shall be in lower case hexadecimal with leading zeroes suppressed. Since there are no kernel driver matching against this compatibles, I expect no regressions with this patch. At the same time, without this fix, we are not be able to validate this device nodes with newly provided DT schema. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://lore.kernel.org/r/20220216074927.3619425-7-o.rempel@pengutronix.de Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2022-04-04ARM: dts: exynos: fix ethernet node name for different odroid boardsOleksij Rempel
The node name of Ethernet controller should be "ethernet" instead of "usbether" as required by Ethernet controller devicetree schema: Documentation/devicetree/bindings/net/ethernet-controller.yaml This patch can potentially affect boot loaders patching against full node path instead of using device aliases. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://lore.kernel.org/r/20220216074927.3619425-6-o.rempel@pengutronix.de Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2022-01-23ARM: dts: exynos: align pinctrl with dtschema in Exynos4412Krzysztof Kozlowski
Align the pin controller related nodes with dtschema. No functional change expected. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Link: https://lore.kernel.org/r/20220111201722.327219-6-krzysztof.kozlowski@canonical.com
2021-03-19ARM: dts: exynos: white-space cleanupsKrzysztof Kozlowski
Fixups some white-space issues. Checkpatch reported: WARNING: Block comments should align the * on each line WARNING: please, no spaces at the start of a line ERROR: code indent should use tabs where possible Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Link: https://lore.kernel.org/r/20210315124313.114842-2-krzysztof.kozlowski@canonical.com
2020-11-05ARM: dts: exynos: Add Ethernet interface description for Odroid X/X2Łukasz Stelmach
Add Ethernet interface description for Odroid X/X2. Add an alias to enable bootloaders to find the Ethernet interface and assign a MAC address. Signed-off-by: Łukasz Stelmach <l.stelmach@samsung.com> Link: https://lore.kernel.org/r/20201103184412.18874-7-l.stelmach@samsung.com Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2020-11-05ARM: dts: exynos: Enable DWC2 dual-role support on OdroidU3+ boardsMarek Szyprowski
MicroUSB port on OdroidU3+ boards can operate both as peripheral or as host port. Till now it was configured as pheriperal only port, but it turned out that the DWC2 driver code already handles everything needed to support USB role-switch, so switch it to dual-role (OTG) mode. This has no effect on OdroidU3 (without 'plus') and OdroidX2, which doesn't have USB needed ID pin and VBUS wiring. Those will still operate correctly in pheriperal mode only. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Tested-by: Anand Moon <linux.amoon@gmail.com> Link: https://lore.kernel.org/r/20201103140214.21690-1-m.szyprowski@samsung.com Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2020-10-28ARM: dts: exynos: adjust node names to DT spec in Exynos4412 boardsKrzysztof Kozlowski
The Devicetree specification expects device node names to have a generic name, representing the class of a device. Also the convention for node names is to use hyphens, not underscores. No functional changes. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20201027170947.132725-5-krzk@kernel.org
2020-10-28ARM: dts: exynos: override GPIO keys node by label in Exynos4412 Odroid familyKrzysztof Kozlowski
Using full paths to extend or override a device tree node is error prone. If there was a typo error, a new node will be created instead of extending the existing node. This will lead to run-time errors that could be hard to detect. A mistyped label on the other hand, will cause a dtc compile error (during build time). Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20201027170947.132725-4-krzk@kernel.org
2019-07-30ARM: dts: exynos: Use standard arrays of generic PHYs for EHCI/OHCI devicesMarek Szyprowski
Move USB PHYs to a standard arrays for Exynos EHCI/OHCI devices. This resolves the conflict between Exynos EHCI/OHCI sub-nodes and generic USB device bindings. Once the Exynos EHCI/OHCI sub-nodes are removed, the boards can finally provide sub-nodes for the USB devices using generic USB device bindings. Suggested-by: Måns Rullgård <mans@mansr.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Link: https://lore.kernel.org/r/20190726081453.9456-4-m.szyprowski@samsung.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-10ARM: dts: exynos: Fix conflicting fixed-regulator GPIO flags and propertiesMarek Szyprowski
Bindings of the fixed-regulator, which precedes support for GPIO flags passed via phandle descriptor, introduced its own method annotating that the given GPIO line is active low or high - by using 'enable-active-high' property. The driver always ignored flags passed via GPIO descriptor. Fix the conflicting GPIO flags to match the status forced by the 'enable-active-high' property to avoid future confusion. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2018-05-15ARM: dts: exynos: Add support for audio over HDMI for Odroid X/X2/U3Sylwester Nawrocki
This patch switches Odroid X/X2/U3 to use dedicated Odroid audio subsystem DT bindings instead of the simple-card in order to add support for audio over HDMI. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2018-01-03ARM: dts: exynos: Add SPDX license identifiersKrzysztof Kozlowski
Replace GPL v2.0 license statements with SPDX license identifiers. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2017-09-19ARM: dts: exynos: Remove redundant interrupt properties in gpio-keys on ↵Marek Szyprowski
Odroid boards GPIO keys don't need interrupt property. Interrupt number can be derived directly from the GPIO pin definition, so remove redundant 'interrupts' and 'interrupt-parent' properties from gpio-keys nodes on Exynos4412-based Odroid boards. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2017-06-07ARM: dts: exynos: Use human-friendly symbols for interrupt flags in board ↵Krzysztof Kozlowski
sources Replace hard-coded values of interrupt flags with respective macros from header to increase code readability. Suggested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2016-12-28ARM: dts: exynos: Cleanup Odroid-X2 and enable sound on Odroid-XMarkus Reichl
Odroid-X2 differs from Odroid-X only in RAM and prime CPU. Remove doubled nodes from exynos4412-odroidx2.dts and move sound node to exynos4412-odroidx.dts to enable sound on both boards. Signed-off-by: Markus Reichl <m.reichl@fivetechno.de> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2016-11-18ARM: dts: exynos: Add ADCs on 4412 and 5422 based odroid boards.Markus Reichl
Odroid-X, -X2, -XU3 and -XU4 have SOC-ADC routed to an external connector. Enable the ADC for use as iio-device. Signed-off-by: Markus Reichl <m.reichl@fivetechno.de> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2016-09-19Merge tag 'samsung-dt-pinctrl-4.9' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/dt Pull "Topic branch for Samsung DeviceTree cleanup for 4.9" from Krzysztof Kozłowski: Replace in DT sources hard-coded values for pinctrl configuration like pull up/down, drive strength and function. This makes the DTS easier to read, especially that some drive strengths values are quite non-obvious. * tag 'samsung-dt-pinctrl-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: ARM: dts: s3c64xx: Use macros for pinctrl configuration ARM: dts: s3c2416: Use macros for pinctrl configuration ARM: dts: s5pv210: Use macros for pinctrl configuration ARM: dts: s3c64xx: Use common macros for pinctrl configuration ARM: dts: exynos: Fix mismatched values of SD drive strengh configuration on exynos4415 ARM: dts: exynos: Fix mismatched value for SD4 pull up/down configuration on exynos4210 ARM: dts: exynos: Use macros for pinctrl configuration on exynos542x/exynos5800 ARM: dts: exynos: Use macros for pinctrl configuration on exynos5410 ARM: dts: exynos: Use macros for pinctrl configuration on exynos5260 ARM: dts: exynos: Use macros for pinctrl configuration on exynos5250 ARM: dts: exynos: Use macros for pinctrl configuration on exynos4415 ARM: dts: exynos: Use macros for pinctrl configuration on exynos4x12 ARM: dts: exynos: Use macros for pinctrl configuration on exynos4210 ARM: dts: exynos: Use macros for pinctrl configuration on exynos3250 ARM: dts: exynos: Use common macros for pinctrl configuration pinctrl: dt-bindings: samsung: Update documentation with new macros pinctrl: dt-bindings: samsung: Add header with values used for configuration
2016-09-16ARM: dts: exynos: Use macros for pinctrl configuration on exynos4x12Krzysztof Kozlowski
Usage of DTS macros instead of hard-coded numbers makes code easier to read. One does not have to remember which value means pull-up/down or specific driver strength. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2016-09-01ARM: dts: exynos: Add missing unit name to memory nodes in Exynos4 DTSJavier Martinez Canillas
This patch fixes the following DTC warnings: "Node /memory has a reg or ranges property, but no unit name" Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2016-09-01ARM: dts: exynos: Remove skeleton.dtsi usage for Exynos4Javier Martinez Canillas
The skeleton.dtsi file was removed in ARM64 for different reasons as explained in commit ("3ebee5a2e141 arm64: dts: kill skeleton.dtsi"). These also applies to ARM and it will also allow to get rid of the following DTC warnings in the future: "Node /memory has a reg or ranges property, but no unit name" The disassembled DTB are almost the same besides an empty chosen node being removed and nodes reordered, so it should not have functional changes. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2016-05-30ARM: dts: exynos: Define vqmmc for eMMC card on Odroid X/X2/U3Krzysztof Kozlowski
The eMMC card vmmc-supply contained incorrectly two regulators: LDO20 and buck8. The second one is ignored. Additionally the buck8 is a vqmmc supply only on X and X2. On U3 the buck8 is providing power to the LAN (SMSC95xx) so instead the LDO22 should be used. Fix this by defining proper vmmc and vqmmc supplies for respective boards. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
2016-01-29ARM: dts: Replace legacy *,wakeup property with wakeup-source for exynos boardsSudeep Holla
Though the keyboard and other driver will continue to support the legacy "gpio-key,wakeup", "linux-keypad,wakeup" boolean property to enable the wakeup source, "wakeup-source" is the new standard binding. This patch replaces all the legacy wakeup properties with the unified "wakeup-source" property in order to avoid any further copy-paste duplication. Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2015-10-08ARM: dts: Use GPIO constants for flags cells in exynos4412 boardsJavier Martinez Canillas
The board DTS are using numeric values instead of the defined GPIO constanst to express polarity, use them to make the DTS more clear. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-06-03ARM: dts: Use labels for overriding nodes in exynos4412-odroidKrzysztof Kozlowski
Usage of labels instead of full paths reduces possible mistakes when overriding nodes. Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com> For thermal zones: Acked-by: Eduardo Valentin <edubezval@gmail.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
2014-07-16ARM: dts: add support for GPIO buttons for exynos4412-odroidMarek Szyprowski
This patch adds support for simple GPIO-based button availabled on Exynos4 based Odroid boards. All supported boards have POWER button, which has been defined in exynos4412-odroid-common.dtsi. X/X2 boards also have additional user-configurable button which has been mapped to KEY_HOME. All defined keys have been marked as possible wakeup source. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-07-16ARM: dts: refactor Odroid DTS file and add support for Odroid X2 and U2/U3Marek Szyprowski
This patch moves some parts of exynos4412-odroidx.dts to common exynos4412-odroid-common.dtsi file and adds support for Odroid X2 and U2/U3 boards. X2 is same as X, but it has faster SoC module (1.7GHz instead of 1.4GHz), while U2/U3 differs from X2 by different way of routing signals to host USB hub. It also lacks some hw modules not yet supported by those dts files (i.e. LCD & touch panel). Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-07-16ARM: dts: correct memory size for exynos4412-odroidxMarek Szyprowski
Last megabyte of RAM is used by secure firmware and should not be accessed by Linux kernel, so correct available memory size in DTS file. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-07-16ARM: dts: add support for USB phy, host and device for exynos4412-odroidxKamil Debski
This patch adds basic support for USB modules (host and device) on OdroidX board. Signed-off-by: Kamil Debski <k.debski@samsung.com> [removed incorrect port@2 node] Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-07-16ARM: dts: enable common hardware blocks for exynos4412-odroidxMarek Szyprowski
This patch adds support for common hardware modules available on all Exynos4412-based Odroid boards, which already have complete support in mainline kernel. This includes secure firmware calls, watchdog, g2d and fimc (mem2mem) multimedia accelerators. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-03-29Merge tag 'exynos-cleanup' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/cleanup3 Merge "Exynos cleanup for v3.15" from Kukjin Kim: - reorganize code for - add support reserve memory for mfc-v7 - consolidate exynos4 and exynos5 machine codes - add generic compatible strings for exynos4 and exynos5 - update DT with generic compatible strings - move clk related dt-binding header file in dt-bindings/clock * tag 'exynos-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: dt-bindings: clock: Move exynos-audss-clk.h to dt-bindings/clock ARM: dts: Update Exynos DT files with generic compatible strings ARM: EXYNOS: Add generic compatible strings ARM: EXYNOS: Consolidate exynos4 and exynos5 machine files ARM: EXYNOS: Consolidate CPU init code ARM: SAMSUNG: Introduce generic Exynos4 and 5 helpers ARM: EXYNOS: Add support to reserve memory for MFC-v7 ARM: SAMSUNG: Reorganize calls to reserve memory for MFC Conflicts: arch/arm/mach-exynos/exynos.c Signed-off-by; Arnd Bergmann <arnd@arndb.de>
2014-03-21ARM: dts: Update Exynos DT files with generic compatible stringsSachin Kamat
Add generic compatible strings to the respective board DT files. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-02-24ARM: dts: update vdd_arm voltage range for exynos4412 based boardsThomas Abraham
To allow EXYNOS4412 based Odroidx and Origen-quad boards to operate between 200MHz to 1.4Ghz, update the vdd_arm voltage range to operate between these cpu clock speeds. Cc: Dongjin Kim <tobetter@gmail.com> Signed-off-by: Thomas Abraham <thomas.ab@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-01-23Merge tag 'clk-for-linus-3.14-part1' of ↵Linus Torvalds
git://git.linaro.org/people/mike.turquette/linux Pull clk framework changes from Mike Turquette: "The first half of the clk framework pull request is made up almost entirely of new platform/driver support. There are some conversions of existing drivers to the common-clock Device Tree binding, and a few non-critical fixes to the framework. Due to an entirely unnecessary cyclical dependency with the arm-soc tree this pull request is broken into two pieces. The second piece will be sent out after arm-soc sends you the pull request that merged in core support for the HiSilicon 3620 platform. That same pull request from arm-soc depends on this pull request to merge in those HiSilicon bits without causing build failures" [ Just did the ARM SoC merges, so getting ready for the second clk tree pull request - Linus ] * tag 'clk-for-linus-3.14-part1' of git://git.linaro.org/people/mike.turquette/linux: (97 commits) devicetree: bindings: Document qcom,mmcc devicetree: bindings: Document qcom,gcc clk: qcom: Add support for MSM8660's global clock controller (GCC) clk: qcom: Add support for MSM8974's multimedia clock controller (MMCC) clk: qcom: Add support for MSM8974's global clock controller (GCC) clk: qcom: Add support for MSM8960's multimedia clock controller (MMCC) clk: qcom: Add support for MSM8960's global clock controller (GCC) clk: qcom: Add reset controller support clk: qcom: Add support for branches/gate clocks clk: qcom: Add support for root clock generators (RCGs) clk: qcom: Add support for phase locked loops (PLLs) clk: qcom: Add a regmap type clock struct clk: Add set_rate_and_parent() op reset: Silence warning in reset-controller.h clk: sirf: re-arch to make the codes support both prima2 and atlas6 clk: composite: pass mux_hw into determine_rate clk: shmobile: Fix MSTP clock array initialization clk: shmobile: Fix MSTP clock index ARM: dts: Add clock provider specific properties to max77686 node clk: max77686: Register OF clock provider ...
2014-01-08ARM: dts: Add clock provider specific properties to max77686 nodeTomasz Figa
This patch adds a label and #clock-cells property to device node of max77686 PMIC to allow using it as a clock provider. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-12-21ARM: dts: Fix definition of MSHC device tree nodes for exynos4x12Tomasz Figa
All SoCs from Exynos4x12 series contain the MSHC block, so its node can be located in exynos4x12.dtsi. In addition, missing clock specifiers are added, generic SoC attributes are moved from board dts files to common dtsi file of SoC family and the node is renamed to a more generic name to follow node naming recommendations. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-06-19ARM: dts: use #include for all device trees for SamsungPadmavathi Venna
Replace /include/ (dtc) with #include (C pre-processor) for all Samsung DT files Signed-off-by: Padmavathi Venna <padma.v@samsung.com> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Reviewed-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-06-12ARM: dts: add vmmc regulator support for ODROID-XDongjin Kim
This patch is to add vmmc regulator node at MSHC and SDHCI for ODROID-X board file. Signed-off-by: Dongjin Kim <tobetter@gmail.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-06-10ARM: dts: add max77686 node entry for ODROID-XDongjin Kim
ODROID-X board have a max77686 PMIC on i2c channel 0. The properties of used LDO and BUCK are defined according the schematic. Signed-off-by: Dongjin Kim <tobetter@gmail.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-04-09Merge tag 'clk-exynos-for-v3.10' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/drivers From Kukjin Kim <kgene.kim@samsung.com>: add suppport common clock framework for exynos * tag 'clk-exynos-for-v3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: (73 commits) ARM: EXYNOS: fix compilation error introduced due to common clock migration clk: exynos5250: Fix divider values for sclk_mmc{0,1,2,3} clk: exynos4: export clocks required for fimc-is clk: samsung: Fix compilation error clk: exynos5250: register display block gate clocks to common clock framework clk: exynos4: Add support for SoC-specific register save list clk: exynos4: Add missing registers to suspend save list clk: exynos4: Remove E4X12 prefix from SRC_DMC register clk: exynos4: Add E4210 prefix to GATE_IP_PERIR register clk: exynos4: Add E4210 prefix to LCD1 clock registers clk: exynos4: Remove SoC-specific registers from save list clk: exynos4: Use SRC_MASK_PERIL{0,1} definitions clk: exynos4: Define {E,V}PLL registers clk: exynos4: Add missing mout_sata on Exynos4210 clk: exynos4: Add missing CMU_TOP and ISP clocks clk: exynos4: Add G3D clocks clk: exynos4: Add camera related clock definitions clk: exynos4: Export mout_core clock of Exynos4210 clk: samsung: Remove unimplemented ops for pll clk: exynos4: Export clocks used by exynos cpufreq drivers ... [arnd: add missing #address-cells property in mshc DT node] Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-03-25ARM: dts: add board specific fixed rate clock nodes for Exynos based platformsThomas Abraham
The clock frequency of xxti and xusbxti clocks is dependent on the frequency of the on-board oscillator that is used to generate these clocks. So allow the frequency of these clocks to be specfied from device tree. Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-03-07ARM: dts: enable RTC device node for exynos4412-odroidxDongjin Kim
This patch enables RTC device node defined in exynos4.dtsi for exynos4412-odroidx. Signed-off-by: Dongjin Kim <tobetter@gmail.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-03-07ARM: dts: Fix the timing property of MSHC controller for exynos4412-odroidxDongjin Kim
This fixes the property of dw-mshc-sdr-timing and dw-mshc-ddr-timing as per its current binding, it only has two cells. Signed-off-by: Dongjin Kim <tobetter@gmail.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-03-07ARM: dts: Add board dts file for ODROID-XDongjin Kim
Add initial DT for Hardkernel's ODROID-X board based on EXYNOS4412 SoC. This patch including adds the node to support fixed voltage for peripherals like LED, ethernet controller, and this patch adds GPIO connected LEDS on ODROID-X board and configure its properties like following: LED1: use 'heartbeat' trigger, blinking while the board is running. LED2: use 'mmc0' trigger, on when mmc0 is accessing. And adds the device node to support eMMC storage on SDCARD4 ports, controlled by MSHC. Signed-off-by: Dongjin Kim <tobetter@gmail.com> Acked-by: Olof Johansson <olof@lixom.net> [kgene.kim@samsung.com: squashed into one commit as per Olof's comment] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>