summaryrefslogtreecommitdiff
path: root/arch/arm/boot/dts/omap3-gta04.dtsi
AgeCommit message (Collapse)Author
2017-12-21ARM: dts: gta04: improve panel compatibility stringH. Nikolaus Schaller
Official vendor string is now "tpo" and not "toppoly". Requires patch "omapdrm: panel: fix compatible vendor string for td028ttec1" so that the driver understands both. Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-11-10ARM: dts: omap: Add missing #phy-cells to usb-nop-xceivRob Herring
"usb-nop-xceiv" is using the phy binding, but is missing #phy-cells property. This is probably because the binding was the precursor to the phy binding. Fixes the following warning in OMAP dts files: Warning (phys_property): Missing property '#phy-cells' in node ... Signed-off-by: Rob Herring <robh@kernel.org> Cc: "Benoît Cousson" <bcousson@baylibre.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Enric Balletbo i Serra <eballetbo@gmail.com> Cc: Javier Martinez Canillas <javier@dowhile0.org> Cc: linux-omap@vger.kernel.org Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-06-18Merge tag 'omap-for-v4.13/dt-signed' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt Device tree changes for omaps for v4.13 merge window. This adds support for am335x-boneblue. The rest of the changes are for enabling features on various devices with the git shortlog describing the changes. * tag 'omap-for-v4.13/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: arm: dts: am33xx: Remove redundant interrupt-parent property ARM: dts: bonegreen-wireless: add WL1835 Bluetooth device node ARM: dts: AM43XX: Remove min and max voltage values for dcdc3 ARM: dts: Add am335x-boneblue ARM: dts: twl4030: Add missing madc reference for bci subnode ARM: dts: am43xx-clocks: Add support for CLKOUT2 ARM: dts: Configure USB host for 37xx-evm ARM: dts: omap: Add generic compatible string for I2C EEPROM ARM: dts: Enable earlycon stdout path for LogicPD torpedo ARM: dts: Enable earlycon stdout path for duovero arm: dts: boneblack-wireless: add WL1835 Bluetooth device node ARM: dts: am571x-idk: Enable the system mailboxes 5 and 6 ARM: dts: am572x-idk: Enable the system mailboxes 5 and 6 ARM: dts: omap4-devkit8000: fix gpmc ranges property ARM: dts: omap3: Remove 'enable-active-low' property ARM: dts: OMAP5: uevm: add µSD card detect ARM: dts: omap4-droid4: Add bluetooth ARM: dts: dra7x-evm: Enable dual-role mode for USB1 ARM: dts: Use - instead of @ for DT OPP entries for TI SoCs ARM: dts: am335x-phycore-som: fix rv4162 compatible Signed-off-by: Olof Johansson <olof@lixom.net>
2017-05-26ARM: dts: omap: Add generic compatible string for I2C EEPROMJavier Martinez Canillas
The at24 driver allows to register I2C EEPROM chips using different vendor and devices, but the I2C subsystem does not take the vendor into account when matching using the I2C table since it only has device entries. But when matching using an OF table, both the vendor and device has to be taken into account so the driver defines only a set of compatible strings using the "atmel" vendor as a generic fallback for compatible I2C devices. So add this generic fallback to the device node compatible string to make the device to match the driver using the OF device ID table. Signed-off-by: Javier Martinez Canillas <javier@dowhile0.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-05-16ARM: dts: gta04: fix polarity of clocks for mcbsp4Andreas Kemnade
The clock polarity setting of the mcbsp connected to the modem was wrong so almost only noise was received. With this patch it is also the same as it was on earlier non-dt kernels where it was working properly Signed-off-by: Andreas Kemnade <andreas@kemnade.info> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-09-14ARM: dts: omap3-gta04: reduce panel backlight PWM frequency to 83HzH. Nikolaus Schaller
This helps to get 100% intensity closer to "always on". It compensates for an effect of dmtimer which at 100% still emits short "off" impulses and the startup-time of the DC/DC converter makes backlight intensity not reach full scale. The lower the PWM frequency is, the smaller is this effect. Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-08-31ARM: dts: omap3: Add missing unit name to memory nodesJavier Martinez Canillas
This patch fixes the following DTC warnings: "Node /memory has a reg or ranges property, but no unit name" Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-06-29ARM: dts: omap3-gta04: remove unneeded unit namesJavier Martinez Canillas
This patch fixes the following DTC warnings for omap3-gta04a3.dtb, omap3-gta04a4.dtb and omap3-gta04a5.dtb: "dmtimer-pwm@11 has a unit name, but no reg property" "connector@1 has a unit name, but no reg property" "endpoint@0 has a unit name, but no reg property" Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-06-10ARM: dts: omap3-gta04: Add RFID eeprom nodeH. Nikolaus Schaller
Define RFID eeprom node which is present on gta04 device. Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Signed-off-by: Marek Belisko <marek@goldelico.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-06-10ARM: dts: omap3-gat04: Fix wifi handlingH. Nikolaus Schaller
Without that change wifi card isn't probed because pwrseq is necessary for libertas chip. Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-06-10ARM: dta: omap3-gta04: Define and use hmc5843 irq pinH. Nikolaus Schaller
Define pinmux and usage if irq pin. Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-06-10ARM: dta: omap3-gta04: Define and use itg3200 irq pinH. Nikolaus Schaller
Define pinmux and usage if irq pin + fix irq edge. Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-06-10ARM: dts: omap3-gta04: Define and use bma180 irq pinH. Nikolaus Schaller
Add pinmux and usage of bma180 irq pin. Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-06-10ARM: dts: omap3-gta04: Add backlight supportMarek Belisko
Define pwm backlight node which is using dmtimer pwm. Signed-off-by: Marek Belisko <marek@goldelico.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-02-26ARM: dts: omap3: Fix NAND device nodesRoger Quadros
Add compatible id, GPMC register resource and interrupt resource to NAND controller nodes. The GPMC node will provide an interrupt controller for the NAND IRQs. Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-12-17ARM: dts: omap: replace legacy *,wakeup property with wakeup-sourceSudeep Holla
Though the keyboard and other driver will continue to support the legacy "gpio-key,wakeup", "linux,wakeup" boolean property to enable the wakeup source, "wakeup-source" is the new standard binding. This patch replaces all the legacy wakeup properties with the unified "wakeup-source" property in order to avoid any futher copy-paste duplication. Cc: "Benoît Cousson" <bcousson@baylibre.com> Cc: Tony Lindgren <tony@atomide.com> Cc: linux-omap@vger.kernel.org Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-10-12ARM: dts: Use defined GPIO constants in flags cell for OMAP2+ boardsJavier Martinez Canillas
Many OMAP2+ DTS are not using the defined constants to express the GPIO polarity. Replace these so the DTS are easier to read. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-05-20ARM: dts: omap3-gta04: Add GSM audio supportMarek Belisko
Add voice audio card which is used for telephony on gta04 board. gtm601 codec is UMTS modem with pcm interface which get samples from microphone and provide data from other party side. Use simple audio card to describe audio card. Signed-off-by: Marek Belisko <marek@goldelico.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-05-20ARM: dts: omap3-gta04: Add hdqw1 supportMarek Belisko
Enable omap-hdq for battery fuel gauge access. Signed-off-by: Marek Belisko <marek@goldelico.com> Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-03-16ARM: dts: omap3: Remove all references to ti,codec propertyMarek Belisko
ti,codec property is not used (parsed) in omap-twl4030 driver. The ti,twl4030-audio which ti,codec points by phandle is mfd driver and device for ASoC codec is created w/o DT compatible string. Removing all references in DT files. Signed-off-by: Marek Belisko <marek@goldelico.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-01-26ARM: dts: omap3-gta04: Disable keypadNeilBrown
The twl4030 keypad is not wired up in the gta04, so mark it disabled to avoid pointless initialization. Signed-off-by: NeilBrown <neil@brown.name> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-01-26ARM: dts: omap3-gta04: only power DSS when necessary.NeilBrown
i.e. configure vpll2 as a supply for the dss rather than being always-on. Signed-off-by: NeilBrown <neil@brown.name> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-01-26ARM: dts: omap3-gta04: add gyroscopeNeilBrown
Signed-off-by: NeilBrown <neil@brown.name> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-01-26ARM: dts: omap3-gta04: enable power-off for wifi card.NeilBrown
Signed-off-by: NeilBrown <neil@brown.name> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-01-26ARM: dts: omap3-gta04: add comments about gpiosNeilBrown
Add comments to state which GPIO is used for some interrupts. Signed-off-by: NeilBrown <neil@brown.name> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-01-26ARM: dts: omap3-gta04: Add ramp value for twl4030 audioMarek Belisko
Signed-off-by: Marek Belisko <marek@goldelico.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-01-26ARM: dts: omap3-gta04: Enable power-off using twl4030H. Nikolaus Schaller
Enabled poweroff through PMIC on GTA04. Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-01-26ARM: dts: omap3-gta04: Fix a GPIO line for bma180 nodeMarek Belisko
GPIO_115 used as irq is in &gpio4, not &gpio3. Signed-off-by: Marek Belisko <marek@goldelico.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-01-26ARM: dts: omap3-gta04: Enable twl audio vibra supportH. Nikolaus Schaller
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-01-26ARM: dts: omap3-gta04: Enable mcbps2 necessary for audioH. Nikolaus Schaller
mcbsp2 is used in gta04 soundcard config and by default is disabled so enable it for gta04. Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-01-26ARM: dts: omap3-gta04: Fix audio node malformattingH. Nikolaus Schaller
Audio should be child of twl node. Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-01-26ARM: dts: omap3-gta04: Fix backup-battery charging in devicetree file.H. Nikolaus Schaller
Fix attribute names. Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-01-13ARM: dts: omap3-gta04: Add handling for tv outputMarek Belisko
Add handling for gta04 tv out chain: venc -> opa362 -> svideo Use invert-polarity in venc node because opa362 is doing polarity inversion also. Signed-off-by: Marek Belisko <marek@goldelico.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-11-10ARM: dts: omap3-gta04: Use omap specific pinctrl definesMarek Belisko
Use omap specific pinctrl defines (OMAP3_CORE1_IOPAD) to configure the padconf register offset. Signed-off-by: Marek Belisko <marek@goldelico.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-10-30ARM: dts: Fix wrong GPMC size mappings for omapsTony Lindgren
The GPMC binding is obviously very confusing as the values are all over the place. People seem to confuse the GPMC partition size for the chip select, and the device IO size within the GPMC partition easily. The ranges entry contains the GPMC partition size. And the reg entry contains the size of the IO registers of the device connected to the GPMC. Let's fix the issue according to the following table: Device GPMC partition size Device IO size connected in the ranges entry in the reg entry NAND 0x01000000 (16MB) 4 16550 0x01000000 (16MB) 8 smc91x 0x01000000 (16MB) 0xf smc911x 0x01000000 (16MB) 0xff OneNAND 0x01000000 (16MB) 0x20000 (128KB) 16MB NOR 0x01000000 (16MB) 0x01000000 (16MB) 32MB NOR 0x02000000 (32MB) 0x02000000 (32MB) 64MB NOR 0x04000000 (64MB) 0x04000000 (64MB) 128MB NOR 0x08000000 (128MB) 0x08000000 (128MB) 256MB NOR 0x10000000 (256MB) 0x10000000 (256MB) Let's also add comments to the fixed entries while at it. Acked-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-07-29ARM: dts: omap3-gta04: Rename gta04.dts to gta04.dtsi and add a4 modelMarek Belisko
This patch is preparation of adding more boards which have common moved to omap3-gta04.dtsi. Other boards have only small additions to omap3-gta04a4. Signed-off-by: Marek Belisko <marek@goldelico.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
generated by cgit (git 2.34.1) at 2024-06-24 17:32:57 +0000