summaryrefslogtreecommitdiff
path: root/arch/arm/boot/dts/omap5.dtsi
AgeCommit message (Collapse)Author
2014-04-18ARM: dts: Grammar /that will/it will/Geert Uytterhoeven
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Cc: linux-omap@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-04-18ARM: dts: Grammar /is uses/ is used/Geert Uytterhoeven
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Cc: linux-omap@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-04-18ARM: dts: omap5: Add clocks to USB3 PHY nodeRoger Quadros
The USB3 PHY driver (ti-pipe3) was updated so that the relevant clock phandles are expected in the DT node. Provide the necessary clocks. Reported-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Roger Quadros <rogerq@ti.com> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-04-09Merge tag 'mmc-updates-for-3.15-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc Pull MMC updates from Chris Ball: "MMC highlights for 3.15: Core: - CONFIG_MMC_UNSAFE_RESUME=y is now default behavior - DT bindings for SDHCI UHS, eMMC HS200, high-speed DDR, at 1.8/1.2V - Add GPIO descriptor based slot-gpio card detect API Drivers: - dw_mmc: Refactor SOCFPGA support as a variant inside dw_mmc-pltfm.c - mmci: Support HW busy detection on ux500 - omap: Support MMC_ERASE - omap_hsmmc: Support MMC_PM_KEEP_POWER, MMC_PM_WAKE_SDIO_IRQ, (a)cmd23 - rtsx: Support pre-req/post-req async - sdhci: Add support for Realtek RTS5250 controllers - sdhci-acpi: Add support for 80860F16, fix 80860F14/SDIO card detect - sdhci-msm: Add new driver for Qualcomm SDHCI chipset support - sdhci-pxav3: Add support for Marvell Armada 380 and 385 SoCs" * tag 'mmc-updates-for-3.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (102 commits) mmc: sdhci-acpi: Intel SDIO has broken card detect mmc: sdhci-pxav3: add support for the Armada 38x SDHCI controller mmc: sdhci-msm: Add platform_execute_tuning implementation mmc: sdhci-msm: Initial support for Qualcomm chipsets mmc: sdhci-msm: Qualcomm SDHCI binding documentation sdhci: only reprogram retuning timer when flag is set mmc: rename ARCH_BCM to ARCH_BCM_MOBILE mmc: sdhci: Allow for irq being shared mmc: sdhci-acpi: Add device id 80860F16 mmc: sdhci-acpi: Fix broken card detect for ACPI HID 80860F14 mmc: slot-gpio: Add GPIO descriptor based CD GPIO API mmc: slot-gpio: Split out CD IRQ request into a separate function mmc: slot-gpio: Record GPIO descriptors instead of GPIO numbers Revert "dts: socfpga: Add support for SD/MMC on the SOCFPGA platform" mmc: sdhci-spear: use generic card detection gpio support mmc: sdhci-spear: remove support for power gpio mmc: sdhci-spear: simplify resource handling mmc: sdhci-spear: fix platform_data usage mmc: sdhci-spear: fix error handling paths for DT mmc: sdhci-bcm-kona: fix build errors when built-in ...
2014-04-07Merge tag 'mfd-for-linus-3.15' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: "Changes to existing drivers: - Use of managed resources - omap, twl4030, ti_am335x_tscadc - Advanced error handling - omap - Rework clk management - omap - Device Tree (re-)work - tc3589x, pm8921, da9055, sec - IRC management overhaul and !BROKEN - pm8921 - Convert to regmap - ssbi, pm8921 - Use simple power-management ops - ucb1x00 - Include file clean-up - adp5520, cs5535, janz, lpc_ich, - lpc_sch, max14577, mcp-sa11x0, pcf50633-adc, rc5t583, rdc321x-southbridge, retu, smsc-ece1099, ti-ssp, ti_am335x_tscadc, tps65912, vexpress-config, wm8350, ywm8350 - Various bug fixes across the subsystem - NULL/invalid pointer dereference prevention - Resource leak mitigation, - Variable used initialised - Staticise various containers - Enforce return value checks New drivers/supported devices: - Add support for s2mps14 and s2mpa01 to sec - Add support for da9063 (v5) to da9063 - Add support for atom-c2000 to gpio-ich - Add support for come-{mbt10,cbt6,chl6} to kempld - Add support for da9053 to da9052 - Add support for itco-wdt (v3) and baytrail to lpc_ich - Add new drivers for tps65218, rtsx_usb, bcm590xx (Re-)moved drivers: - twl4030 ==> drivers/iio - ti-ssp ==> /dev/null" * tag 'mfd-for-linus-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (103 commits) mfd: wm5110: Correct default for HEADPHONE_DETECT_1 mfd: arizona: Correct small errors in the DT binding documentation mfd: arizona: Mark DSP clocking register as volatile mfd: devicetree: bindings: Add pm8xxx RTC description mfd: kempld-core: Fix potential hang-up during boot mfd: sec-core: Fix uninitialized 'regmap_rtc' on S2MPA01 mfd: tps65910: Fix regmap_irq_chip_data leak on mfd_add_devices fail mfd: tps65910: Fix possible invalid pointer dereference on regmap_add_irq_chip fail mfd: sec-core: Fix I2C dummy device resource leak on probe failure mfd: sec-core: Add of_compatible strings for clock MFD cells mfd: Remove obsolete ti-ssp driver Documentation: mfd: s2mps11: Describe S5M8767 and S2MPS14 clocks mfd: bcm590xx: Fix type argument for module device table mfd: lpc_ich: Add support for Intel Bay Trail SoC mfd: lpc_ich: Add support for NM10 GPIO mfd: lpc_ich: Change Avoton to iTCO v3 watchdog: iTCO_wdt: Add support for v3 silicon mfd: lpc_ich: Add support for iTCO v3 mfd: lpc_ich: Remove lpc_ich_cfg struct use mfd: lpc_ich: Only configure watchdog or GPIO when present ...
2014-04-05Merge tag 'dt-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
Pull ARM SoC device tree changes from Arnd Bergmann: "A large part of the arm-soc patches are nowadays DT changes, adding support for new SoCs, boards and devices without changing kernel source. The plan is still to move the devicetree files out of the kernel tree and reduce the amount of churn going on here, but we keep finding reasons to delay doing that. Changes are really all over the place, with little sticking out particularly. We have contributions from a total of 116 people in this branch. Unfortunately, the size of this branch also causes a significant number of conflicts at the moment, typically when subsystem maintainers merge patches that change the driver at the same time as the dts files. In most cases this could be avoided because the dts changes are supposed to be compatible in both ways, and we are asking everyone to send ARM dts changes through our tree only" * tag 'dt-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (541 commits) dts: stmmac: Document the clocks property in the stmmac base document dts: socfpga: Add DTS entry for adding the stmmac glue layer for stmmac. ARM: STi: stih41x: Add support for the FSM Serial Flash Controller ARM: STi: stih416: Add support for the FSM Serial Flash Controller ARM: tegra: fix Dalmore pinctrl configuration ARM: dts: keystone: use common "ti,keystone" compatible instead of -evm ARM: dts: k2hk-evm: set ubifs partition size for 512M NAND ARM: dts: Build all keystone dt blobs ARM: dts: keystone: Fix control register range for clktsip ARM: dts: keystone: Fix domain register range for clkfftc1 ARM: dts: bcm28155-ap: leave camldo1 on to fix reboot ARM: dts: add bcm590xx pmu support and enable for bcm28155-ap ARM: dts: bcm21664: Add device tree files. ARM: DT: bcm21664: Device tree bindings ARM: efm32: properly namespace i2c location property ARM: efm32: fix unit address part in USART2 device nodes' names ARM: mvebu: Enable NAND controller in Armada 385-DB ARM: mvebu: Add support for NAND controller in Armada 38x SoC ARM: mvebu: Add the Core Divider clock to Armada 38x SoCs ARM: mvebu: Add a 2 GHz fixed-clock on Armada 38x SoCs ...
2014-03-13mfd: omap-usb-host: Use clock names as per function for reference clocksRoger Quadros
Use a meaningful name for the reference clocks so that it indicates the function. Update the OMAP4+ USB Host node as well to be in sync with the changes. Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-03-13ARM: dts: omap4/5: Use l3_ick for the gpmc nodeFlorian Vaussard
The GPMC clock is derived from l3_ick. The simplest solution is to reference directly l3_ick to provide the GPMC fck in order to get correct timings. The real management of the clock is left to hwmod. Cc: stable@vger.kernel.org # v3.14+ Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-03-12ARM: dts: OMAP5: Add IOMMU nodesSuman Anna
The IOMMU DT nodes have been added for the DSP and IPU subsystems. The MMUs in OMAP5 are identical to those in OMAP4, including the bus error back capability on IPU. Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-03-05ARM: dts: omap5: added dt properties to adapt to the new phy framworkKishon Vijay Abraham I
Added device tree bindings for dwc3, usb2 and usb3 PHYs. The documentation of these can be found at Documentation/devicetree/bindings/phy/phy-bindings.txt and Documentation/devicetree/bindings/phy/ti-phy.txt. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-03-04ARM: dts: Get rid of incompatible ids for hci-omap USB host nodesRoger Quadros
The OMAP EHCI and OHCI controllers are not compatible with drivers other than "ti,ehci-omap" and "ti,ohci-omap3" respectively, so get rid of the incompatible ids. CC: Alan Stern <stern@rowland.harvard.edu> CC: Nishant Menon <nm@ti.com> CC: Kevin Hilman <khilman@linaro.org> Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-03-04ARM: dts: add pbias dt nodeBalaji T K
Add pbias regulator node as a child of system control module - syscon. Signed-off-by: Balaji T K <balajitk@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Tested-by: Florian Vaussard <florian.vaussard@epfl.ch> Tested-by: Stefan Roese <sr@denx.de> Signed-off-by: Chris Ball <chris@printf.net>
2014-03-02Merge tag 'for_3.15/dts_signed' of ↵Tony Lindgren
git://git.kernel.org/pub/scm/linux/kernel/git/bcousson/linux-omap-dt into omap-for-v3.15/dt Add craneboard devices Add more N900 devices Add am43x-epos-evm and am437x-gp-evm devices Add OMAP4 DMM devices Conflicts: arch/arm/boot/dts/am43x-epos-evm.dts arch/arm/boot/dts/dra7.dtsi
2014-03-02ARM: dts: omap4+: Add DMM bindingsArchit Taneja
Add Dynamic Memory Manager (DMM) bindings for OMAP4 and OMAP5 and DRA7x devices. DMM only requires address and irq information. Add documentation for the DMM bindings. Originally worked on by Andy Gross <andygro@gmail.com> Cc: Andy Gross <andygro@gmail.com> Signed-off-by: Archit Taneja <archit@ti.com> Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
2014-02-28ARM: dts: OMAP3+: add clock nodes for CPUNishanth Menon
OMAP34xx, AM3517 and OMAP36xx platforms use dpll1 clock. OMAP443x, OMAP446x, OMAP447x, OMAP5, DRA7, AM43xx platforms use dpll_mpu clock. Latency used is the generic latency defined in omap-cpufreq driver. Signed-off-by: Nishanth Menon <nm@ti.com> Acked-by: Acked-by: Tero Kristo <t-kristo@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-02-28ARM: dts: omap5: Set all audio related IP's status to disabled as defaultPeter Ujfalusi
Board dts files will need to enable the IP nodes which they are using and does not have to care about the not used ones (to disable them). Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-02-28ARM: dts: OMAP: Add #hwlock-cells property to hwspinlock nodesSuman Anna
Add a new generic property "#hwlock-cells" to the hwspinlock DT nodes on OMAP4, OMAP5 and AM33xx. This common property allows different platform implementations to define the args specifier length. OMAP implementations will always use a value of 1. Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-01-28Merge tag 'clk-for-linus-3.14-part2' of ↵Linus Torvalds
git://git.linaro.org/people/mike.turquette/linux Pull more clock framework changes from Mike Turquette: "The second half of the clock framework pull requeust for 3.14 is dominated by platform support for Qualcomm's MSM SoCs, DT binding updates for TI's OMAP-ish processors and additional support for Samsung chips. Additionally there are other smaller clock driver changes and several last minute fixes. This pull request also includes the HiSilicon support that depends on the already-merged arm-soc pull request" [ Fix up stupid compile error in the source tree with evil merge - Grumpy Linus ] * tag 'clk-for-linus-3.14-part2' of git://git.linaro.org/people/mike.turquette/linux: (49 commits) clk: sort Makefile clk: sunxi: fix overflow when setting up divided factors clk: Export more clk-provider functions dt-bindings: qcom: Fix warning with duplicate dt define clk: si5351: remove variant from platform_data clk: samsung: Remove unneeded semicolon clk: qcom: Fix modular build ARM: OMAP3: use DT clock init if DT data is available ARM: AM33xx: remove old clock data and link in new clock init code ARM: AM43xx: Enable clock init ARM: OMAP: DRA7: Enable clock init ARM: OMAP4: remove old clock data and link in new clock init code ARM: OMAP2+: io: use new clock init API ARM: OMAP2+: PRM: add support for initializing PRCM clock modules from DT ARM: OMAP3: hwmod: initialize clkdm from clkdm_name ARM: OMAP: hwmod: fix an incorrect clk type cast with _get_clkdm ARM: OMAP2+: clock: use driver API instead of direct memory read/write ARM: OMAP2+: clock: add support for indexed memmaps ARM: dts: am43xx clock data ARM: dts: AM35xx: use DT clock data ...
2014-01-17ARM: dts: omap5 clock dataTero Kristo
This patch creates a unique node for each clock in the OMAP5 power, reset and clock manager (PRCM). Signed-off-by: Tero Kristo <t-kristo@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-12-04arm: dts: add cooling properties on omap5 cpu nodeEduardo Valentin
OMAP5 devices can reach high temperatures and thus needs to have cpufreq-cooling on systems running on it. This patch adds the required cooling device properties so that cpufreq-cpu0 driver loads the cooling device. Cc: "Benoît Cousson" <bcousson@baylibre.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Ian Campbell <ian.campbell@citrix.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: linux-omap@vger.kernel.org Cc: devicetree@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
2013-12-04arm: dts: add omap5 thermal dataEduardo Valentin
This patch changes the dtsi entry on omap5 to contain the thermal data. This data will enable the passive cooling with CPUfreq cooling device at 100C. The system will do a thermal shutdown at 125C whenever any of its sensors sees this level. Cc: "Benoît Cousson" <bcousson@baylibre.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Ian Campbell <ian.campbell@citrix.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: linux-omap@vger.kernel.org Cc: devicetree@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
2013-11-11Merge tag 'dt-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC DT updates from Olof Johansson: "Most of this branch consists of updates, additions and general churn of the device tree source files in the kernel (arch/arm/boot/dts). Besides that, there are a few things to point out: - Lots of platform conversion on OMAP2+, with removal of old board files for various platforms. - Final conversion of a bunch of ux500 (ST-Ericsson) platforms as well - Some updates to pinctrl and other subsystems. Most of these are for DT-enablement of the various platforms and acks have been collected" * tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (385 commits) ARM: dts: bcm11351: Use GIC/IRQ defines for sdio interrupts ARM: dts: bcm: Add missing UARTs for bcm11351 (bcm281xx) ARM: dts: bcm281xx: Add card detect GPIO ARM: dts: rename ARCH_BCM to ARCH_BCM_MOBILE (dt) ARM: bcm281xx: Add device node for the GPIO controller ARM: mvebu: Add Netgear ReadyNAS 104 board ARM: tegra: fix Tegra114 IOMMU register address ARM: kirkwood: add support for OpenBlocks A7 platform ARM: dts: omap4-panda: add DPI pinmuxing ARM: dts: AM33xx: Add RNG node ARM: dts: AM33XX: Add hwspinlock node ARM: dts: OMAP5: Add hwspinlock node ARM: dts: OMAP4: Add hwspinlock node ARM: dts: use 'status' property for PCIe nodes ARM: dts: sirf: add missed address-cells and size-cells for prima2 I2C ARM: dts: sirf: add missed cell, cs and dma channel for SPI nodes ARM: dts: sirf: add missed graphics2d iobg in atlas6 dts ARM: dts: sirf: add missed chhifbg node in prima2 and atlas6 dts ARM: dts: sirf: add missed memcontrol-monitor node in prima2 and atlas6 dts ARM: mvebu: Add the core-divider clock to Armada 370/XP ...
2013-10-29ARM: dts: OMAP5: Add hwspinlock nodeSuman Anna
Add the hwspinlock device tree node for OMAP5 SoCs. Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-10-22ARM: dts: OMAP5: Add CPU OPP tableJ Keerthy
Add DT OPP table for OMAP54xx family of devices. This data is decoded by OF with of_init_opp_table() helper function. The data is based on OMAP543x ES2.0 DM Operating Condition Addendum Version 0.6(April 2013) NOTE: The voltage and frequency values work well only on NOM samples and are supposed to work properly only with ABB/AVS for ALL OPPs. TODO: Add SPEED BIN OPP after ABB and AVS support so the cpufreq works on all samples seamlessly. Clock node is pending alignment for clock dts conversion [nm@ti.com: sync to latest and fixes] Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: J Keerthy <j-keerthy@ti.com> Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
2013-10-22ARM: dts: omap5-uevm: add smps123 supply for CPUNishanth Menon
regulator smps123 supply from Palmas PMIC powers CPU0 on OMAP5uEVM. Based on a patch by J Keerthy <j-keerthy@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
2013-10-22ARM: dts: OMAP3+: Add i2c aliasesNishanth Menon
Currently, on OMAP5, i2c1 and i2c5 defer probe due to pinctrl dependencies. This changes the i2c ID each bus is registered with in i2c-dev interface. As a result of this, many userspace tools break and there is no consistent manner to fix the same if the i2c dev interface have no consistent numbering. Since this could happen for other OMAP derivatives, provide i2c alias for all OMAP3+ SoCs to allow ordering the i2c devices correctly. Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
2013-10-20ARM: dts: OMAP5: Add dr_mode for dwc3George Cherian
Added dr_mode property in dwc3 and set its default mode to device. Signed-off-by: George Cherian <george.cherian@ti.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
2013-10-20ARM: dts: omap: Add reset/idle on init bindings for OMAPRajendra Nayak
On OMAP we have co-processor IPs, memory controllers, GPIOs which control regulators and power switches to PMIC, and SoC internal Bus IPs, some or most of which should either not be reset or idled or both at init. (In some cases there are erratas which prevent an IP from being reset) Have a way to pass this information from DT. Update the am33xx/omap4 and omap5 dtsi files with the new bindings for modules which either should not be idled. reset or both. A later patch would cleanup the same information that exists today as part of the hwmod data files. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
2013-10-20ARM: dts: OMAP5: Remove clock-frequency field for cpu timersSricharan R
The arm arch timers frequency are now programmed in the CNTFREQ per-cpu register by the timer code using the secure API [1]. So remove the redundant entry from the dts. [1] http://marc.info/?l=linux-omap&m=138139106312786&w=2 Signed-off-by: Sricharan R <r.sricharan@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
2013-10-08ARM: dts: OMAP5: add palmas-usb nodeFelipe Balbi
Without this node, there will be no palmas driver to notify dwc3 that a cable has been connected and, without that, dwc3 will never initialize. Signed-off-by: Felipe Balbi <balbi@ti.com> [kishon@ti.com: added dt properties for enabling vbus/id interrupts and fixed vbus-supply value after SMPS10 is modeled as 2 regulators] Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
2013-10-08ARM: dts: Remove '0x's from OMAP5 DTS fileLee Jones
Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
2013-10-03ARM: dts: omap5: update omap-control-usb nodeRoger Quadros
Split USB2 PHY and USB3 PHY into separate omap-control-usb nodes. Get rid of "ti,type" property. CC: Benoit Cousson <bcousson@baylibre.com> Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-17ARM: dts: OMAP5: fix ocp2scp DTS dataFelipe Balbi
Fix the DTS data for ocp2scp node by adding the missing reg property. Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
2013-09-17ARM: dts: OMAP5: fix reg property sizeFelipe Balbi
USB3 block has a 64KiB space, another 64KiB is used for the wrapper. Without this change, resource_size() will get confused and driver won't probe because size will be negative. Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
2013-07-29usb: dwc3: core: switch to snps,dwc3Felipe Balbi
all other drivers using Synopsys IPs with DT have a compatible of snps,$driver, in order to add consistency, we are switching over to snps,dwc3 but keeping synopsys,dwc3 in the core driver to maintain backwards compatibility. New DTS bindings should NOT use synopsys,dwc3. Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-06-20Merge branch 'for_3.11/dts' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/bcousson/linux-omap-dt into next/dt From Benoit Cousson: omap devicetree changes for v3.11 merge window - Add mandatory DT support for missing IPs, like USB host, bandgap, LED, NAND, LAN, CPSW, PWM for OMAP and AMXX devices. - Introduce new AM43x silicon. * 'for_3.11/dts' of git://git.kernel.org/pub/scm/linux/kernel/git/bcousson/linux-omap-dt: (52 commits) ARM: dts: omap5-uevm: Provide USB Host PHY clock frequency ARM: dts: omap4-panda: Fix DVI EDID reads ARM: dts: omap4-panda: Add USB Host support ARM: dts: AM43x EPOS EVM support ARM: dts: OMAP5: Add bandgap DT entry ARM: dts: AM33XX: Add pinmux configuration for CPSW to am335x EVM ARM: dts: AM33XX: Add pinmux configuration for CPSW to EVMsk ARM: dts: AM33XX: Add pinmux configuration for CPSW to beaglebone ARM: dts: omap3-overo: Add default trigger for TWL4030 LED ARM: dts: omap3-tobi: Correct polarity for GPIO LED ARM: dts: omap3-tobi: Add SMSC911X node ARM: dts: OMAP3: Include IRQ header ARM: dts: Protect pinctrl headers against multiple inclusions ARM: AM33XX: clock data: Enable clkout2 as part of init ARM: AM33XX: clock: Add debugSS clock nodes ARM: dts: OMAP5: Add Palmas MFD node and regulator nodes ARM: dts: AM33XX: Add PWM backlight DT data to am335x-evmsk ARM: dts: AM33XX: Add PWM backlight DT data to am335x-evm ARM: dts: AM33XX: Add PWMSS device tree nodes ARM: dts: OMAP4460: Add bandgap entry for OMAP4460 devices ... Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Tony Lindgren <tony@atomide.com>
2013-06-20Merge tag 'mxs-dt-3.11' of git://git.linaro.org/people/shawnguo/linux-2.6 ↵Arnd Bergmann
into next/dt From Shawn Guo: mxs device tree changes for 3.11: * A couple of new board support, cfa10055 and cfa10057 * A few updates on cfa10036 device tree source * Some auart pinctrl data addition * Adopt soc bus infrastructure for mach-mxs * tag 'mxs-dt-3.11' of git://git.linaro.org/people/shawnguo/linux-2.6: ARM: mxs: dt: Add Crystalfontz CFA-10057 device tree ARM: mxs: dt: Add the Crystalfontz CFA-10055 device tree ARM: cfa10049: Switch the chip select pin of the LCD controller ARM: cfa10036: Add USB0 OTG port ARM: dts: apf28dev: Add touchscreen support for APF28dev ARM: mxs: Fix UARTs on M28EVK ARM: cfa10036: dt: Change i2c0 clock frequency ARM: dts: cfa10036: Change the OLED display to SSD1306 ARM: mx28: add auart4 2 pins pinmux to imx28.dtsi ARM: mx28: add auart3 2 pins pinmux to imx28.dtsi ARM: mx28: add auart2 2 pins pinmux to imx28.dtsi ARM: mxs: Use soc bus infrastructure ARM: dts: mx28: Adjust the digctl compatible string ARM: mxs: Remove init_irq declaration in machine description Includes an update to 3.10-rc6 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-06-19ARM: dts: OMAP5: Add bandgap DT entryEduardo Valentin
Add bandgap device DT entry for OMAP5 dtsi. Cc: Tony Lindgren <tony@atomide.com> Cc: Russell King <linux@arm.linux.org.uk> Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com> Signed-off-by: J Keerthy <j-keerthy@ti.com> [benoit.cousson@linaro.org: Fix alignement and use the macros for IRQ attributes] Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2013-06-18ARM: dts: omap5-uevm: Add USB Host supportRoger Quadros
Provide the RESET regulators for the USB PHYs, the USB Host port modes and the PHY devices. Also provide pin multiplexer information for the USB host pins. Signed-off-by: Roger Quadros <rogerq@ti.com> [r.sricharan@ti.com: Replaced constants with preprocessor macros] Signed-off-by: Sricharan R <r.sricharan@ti.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2013-06-18ARM: dts: OMAP2+: Use pinctrl constantsFlorian Vaussard
Using constants for pinctrl allows a better readability, and removes redundancy with comments. Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2013-06-18ARM: dts: OMAP4/5: Use existing constants for IRQsFlorian Vaussard
Use the constants defined in include/dt-bindings/interrupt-controller/ to enhance readability. Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2013-06-18ARM: dts: OMAP2+: Use existing constants for GPIOsFlorian Vaussard
Use standard GPIO constants to enhance the readability of DT GPIOs. Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2013-06-18ARM: dts: OMAP2+: Use #include for all device treesFlorian Vaussard
Replace /include/ by #include for OMAP2+ DT, in order to use the C pre-processor, making use of #define features possible. Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2013-06-18ARM: dts: OMAP4+: Remove multimedia carveoutsSuman Anna
The carveouts that have been reserved for multimedia usecases are not being used currently by any driver and so have been cleaned up. Memory will be allocated runtime through CMA for enabling the multimedia usecases. Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2013-06-03ARM: dts: OMAP5: Fix missing PWM capability to timer nodesSuman Anna
OMAP5 has 6 timers (GPTimers 5, 6, 8 to 11) that are capable of PWM. The PWM capability property is missing from the node definitions of couple of timers. Add ti,timer-pwm attribute for timer 5, 6, 8 and 11. Signed-off-by: Suman Anna <s-anna@ti.com> [benoit.cousson@linaro.org: Update changelog and subject to highlight the fix] Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2013-05-23ARM: dts: omap: cpus/cpu nodes dts updatesLorenzo Pieralisi
This patch updates the in-kernel dts files according to the latest cpus and cpu bindings updates for ARM. Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2013-04-09ARM: dts: OMAP2+: Identify GPIO banks that are always poweredJon Hunter
Add the "ti,gpio-always-on" property to the appropriate GPIO banks to indicate which banks are always powered and will never lose logic state. Signed-off-by: Jon Hunter <jon-hunter@ti.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2013-04-09ARM: dts: OMAP2+: Update DMTIMER compatibility propertyJon Hunter
Update the DMTIMER compatibility property to reflect the register level compatibilty between devices and update the various OMAP/AM timer bindings with the appropriate compatibility string. By doing this we can add platform specific data applicable to specific timer versions to the driver. For example, errata flags can be populated for the timer versions that are impacted. Signed-off-by: Jon Hunter <jon-hunter@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2013-04-09ARM: dts: OMAP5: Add watchdog timer nodeLokesh Vutla
Add watchdog timer DT node for OMAP5 devices. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2013-04-09ARM: dts: OMAP4/5: Update l3-noc DT nodesSantosh Shilimkar
Add l3-noc node for OMAP4 and OMAP5 devices. Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> [jon-hunter@ti.com: Fix the problem caused by adding 32 to the interrupt number for the L3 interrupts to account for per processor interrupts (PPI) and software generated interrupts (SGI) which typically are mapped to the first 32 interrupts in the ARM GIC. This is not necessary because the first parameter of the ARM GIC interrupt property specifies the GIC interrupt type (ie. SGI, PPI, etc). Hence, fix the interrupt number for the L3 interrupts by substracting 32] Signed-off-by: Jon Hunter <jon-hunter@ti.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
generated by cgit (git 2.34.1) at 2024-07-03 07:24:01 +0000