summaryrefslogtreecommitdiff
path: root/arch/arm/boot/dts/r8a7793.dtsi
AgeCommit message (Collapse)Author
2023-06-21ARM: dts: Move .dts files to vendor sub-directoriesRob Herring
The arm dts directory has grown to 1559 boards which makes it a bit unwieldy to maintain and use. Past attempts stalled out due to plans to move .dts files out of the kernel tree. Doing that is no longer planned (any time soon at least), so let's go ahead and group .dts files by vendors. This move aligns arm with arm64 .dts file structure. There's no change to dtbs_install as the flat structure is maintained on install. The naming of vendor directories is roughly in this order of preference: - Matching original and current SoC vendor prefix/name (e.g. ti, qcom) - Current vendor prefix/name if still actively sold (SoCs which have been aquired) (e.g. nxp/imx) - Existing platform name for older platforms not sold/maintained by any company (e.g. gemini, nspire) The whole move was scripted with the exception of MAINTAINERS and a few makefile fixups. Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Michal Simek <michal.simek@amd.com> #Xilinx Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Neil Armstrong <neil.armstrong@linaro.org> Acked-by: Paul Barker <paul.barker@sancloud.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com> Acked-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Wei Xu <xuwei5@hisilicon.com> #hisilicon Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Nick Hawkins <nick.hawkins@hpe.com> Acked-by: Baruch Siach <baruch@tkos.co.il> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Acked-by: Peter Rosin <peda@axentia.se> Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> Acked-by: Sudeep Holla <sudeep.holla@arm.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> #broadcom Acked-by: Manivannan Sadhasivam <mani@kernel.org> Reviewed-by: Jisheng Zhang <jszhang@kernel.org> Acked-by: Patrice Chotard <patrice.chotard@foss.st.com> Acked-by: Romain Perier <romain.perier@gmail.com> Acked-by: Alexandre TORGUE <alexandre.torgue@st.com> Acked-by: Shawn Guo <shawnguo@kernel.org> Acked-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Acked-by: Enric Balletbo i Serra <eballetbo@gmail.com> Signed-off-by: Rob Herring <robh@kernel.org>
2023-01-26ARM: dts: renesas: #sound-dai-cells is used when simple-cardKuninori Morimoto
Current sound comment is indicating that #sound-dai-cells is required, but it is needed only if the board is using "simple-card". Hence tidy up the comments. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/87edrzi41e.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-10-28ARM: dts: renesas: Miscellaneous whitespace fixesGeert Uytterhoeven
Remove superfluous spaces near properties and equal signs. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/1666adade07e16b77af1f03c55799b2ad1378e60.1666605877.git.geert+renesas@glider.be
2022-04-13ARM: dts: rcar-gen2: Add interrupt properties to watchdog nodesWolfram Sang
Driver doesn't use it yet, but let's describe the HW properly. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/20220322095512.4707-2-wsa+renesas@sang-engineering.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2021-05-25ARM: dts: renesas: Move enable-method to CPU nodesGeert Uytterhoeven
According to Documentation/devicetree/bindings/arm/cpus.yaml, the "enable-method" property should be a property of the individual CPU nodes, and not of the parent "cpus" container node. However, on R-Car Gen2 and RZ/G1 SoCs, the property is tied to the "cpus" node instead. Secondary CPU bringup and CPU hot (un)plug work regardless, as arm_dt_init_cpu_maps() falls back to looking in the "cpus" node. The cpuidle code does not have such a fallback, so it does not detect the enable-method. Note that cpuidle does not support the "renesas,apmu" enable-method yet, so for now this does not make any difference. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/35fcfedf9de9269185c48ca5a6dfcba7cdd3484b.1621427319.git.geert+renesas@glider.be
2021-03-08ARM: dts: renesas: Group tuples in APMU cpus propertiesGeert Uytterhoeven
To improve human readability and enable automatic validation, the tuples in "cpus" properties in device nodes for Advanced Power Management Units for AP-System Core (APMU) should be grouped using angle brackets. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20210204130517.1647073-2-geert+renesas@glider.be
2020-09-11ARM: dts: renesas: Fix pin controller node namesGeert Uytterhoeven
According to Devicetree Specification v0.2 and later, Section "Generic Names Recommendation", the node name for a pin controller device node should be "pinctrl". Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Link: https://lore.kernel.org/r/20200821112351.5518-1-geert+renesas@glider.be
2020-07-17ARM: dts: renesas: Fix SD Card/eMMC interface device node namesYoshihiro Shimoda
Fix the device node names as "mmc@". Fixes: 66474697923c ("ARM: dts: r7s72100: add sdhi to device tree") Fixes: a49f76cddaee ("ARM: dts: r7s9210: Add SDHI support") Fixes: 43304a5f5106 ("ARM: shmobile: r8a73a4: tidyup DT node naming") Fixes: 7d907894bfe3 ("ARM: shmobile: r8a7740: tidyup DT node naming") Fixes: 3ab2ea5fd1ce ("ARM: dts: r8a7742: Add SDHI nodes") Fixes: 63ce8a617b51 ("ARM: dts: r8a7743: Add SDHI controllers") Fixes: b591e323b271 ("ARM: dts: r8a7744: Add SDHI nodes") Fixes: d83010f87ab3 ("ARM: dts: r8a7744: Initial SoC device tree") Fixes: 7079131ef9b9 ("ARM: dts: r8a7745: Add SDHI controllers") Fixes: 0485da788028 ("ARM: dts: r8a77470: Add SDHI1 support") Fixes: 15aa5a95e820 ("ARM: dts: r8a77470: Add SDHI0 support") Fixes: f068cc816015 ("ARM: dts: r8a77470: Add SDHI2 support") Fixes: 14e1d9147d96 ("ARM: shmobile: r8a7778: tidyup DT node naming") Fixes: 2624705ceb7b ("ARM: shmobile: r8a7779: tidyup DT node naming") Fixes: b718aa448378 ("ARM: shmobile: r8a7790: tidyup DT node naming") Fixes: b7ed8a0dd4f1 ("ARM: shmobile: Add SDHI devices to r8a7791 DTSI") Fixes: ce01b14ecf19 ("ARM: dts: r8a7792: add SDHI support") Fixes: fc9ee228f500 ("ARM: dts: r8a7793: Add SDHI controllers") Fixes: b8e8ea127d00 ("ARM: shmobile: r8a7794: add SDHI DT support") Fixes: 33f6be3bf6b7 ("ARM: shmobile: sh73a0: tidyup DT node naming") Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/1594382936-14114-1-git-send-email-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2020-04-27ARM: dts: renesas: Fix IOMMU device node namesYoshihiro Shimoda
Fix IOMMU device node names as "iommu@". Fixes: bbb44da0b595 ("ARM: dts: r8a7743: Add IPMMU DT nodes") Fixes: 0dcba3de5835 ("ARM: dts: r8a7745: Add IPMMU DT nodes") Fixes: 350ae49b97c4 ("ARM: dts: r8a7744: Add IPMMU DT nodes") Fixes: 70496727c082 ("ARM: shmobile: r8a7790: Add IPMMU DT nodes") Fixes: f1951852ed17 ("ARM: shmobile: r8a7791: Add IPMMU DT nodes") Fixes: 098cb3a601e6 ("ARM: shmobile: r8a7793: Add IPMMU nodes") Fixes: 1cb2794f6082 ("ARM: shmobile: r8a7794: Add IPMMU DT nodes") Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Link: https://lore.kernel.org/r/1587461756-13317-1-git-send-email-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2020-02-24ARM: dts: rcar-gen2: Add reset control properties for displayGeert Uytterhoeven
Add reset control properties to the device nodes for the Display Units on all supported R-Car Gen2 SoCs. Note that on these SoCs, there is only a single reset for all DU channels. Join the clocks lines while at it, to increase uniformity. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Ulrich Hecht <uli+renesas@fpond.eu> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://lore.kernel.org/r/20200218133019.22299-2-geert+renesas@glider.be
2019-12-31ARM: dts: rcar-gen2: Add missing mmio-sram bus propertiesGeert Uytterhoeven
"#address-cells", "#size-cells", and "ranges" are required properties for devices nodes compatible with "mmio-sram", leading to warnings when running "make dtbs_check": $ make dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/sram/sram.yaml arch/arm/boot/dts/r8a7791-koelsch.dt.yaml: sram@e63a0000: '#address-cells' is a required property arch/arm/boot/dts/r8a7791-koelsch.dt.yaml: sram@e63a0000: '#size-cells' is a required property arch/arm/boot/dts/r8a7791-koelsch.dt.yaml: sram@e63a0000: 'ranges' is a required property ... Fix this by adding the missing properties to the mmio-sram device nodes in the DTS files for all affected R-Car Gen2 and RZ/G1 SoCs. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20191213162604.1890-1-geert+renesas@glider.be
2019-12-20ARM: dts: renesas: Group tuples in interrupt propertiesGeert Uytterhoeven
To improve human readability and enable automatic validation, the tuples in the various properties containing interrupt specifiers should be grouped. While "make dtbs_check" does not impose this yet for the "interrupts" property, it does for the "interrupt-map" property, leading to warnings like: pci@ee090000: interrupt-map:0: [0, 0, 0, 1, 5, 0, 108, 4, 2048, 0, 0, 1, 5, 0, 108, 4, 4096, 0, 0, 2, 5, 0, 108, 4] is too long pci@ee0d0000: interrupt-map:0: [0, 0, 0, 1, 5, 0, 113, 4, 2048, 0, 0, 1, 5, 0, 113, 4, 4096, 0, 0, 2, 5, 0, 113, 4] is too long Fix this by grouping the tuples of the "interrupts" and "interrupt-map" properties using angle brackets. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20191213164115.3697-4-geert+renesas@glider.be Reviewed-by: Ulrich Hecht <uli+renesas@fpond.eu>
2018-09-28ARM: dts: Include R-Car Gen2 product name in DTSI filesMagnus Damm
Improve the user friendliness of the DTS code base by including the R-Car product name in each R-Car Gen2 DTSI file. The product names are taken from: Documentation/devicetree/bindings/arm/shmobile.txt Signed-off-by: Magnus Damm <damm@opensource.se> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-07-23ARM: dts: convert to SPDX identifier for Renesas boardsWolfram Sang
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-07-23ARM: dts: r8a77(43|9[013]): Add missing OPP properties for CPUsViresh Kumar
The OPP properties, like "operating-points", should either be present for all the CPUs of a cluster or none. If these are present only for a subset of CPUs of a cluster then things will start falling apart as soon as the CPUs are brought online in a different order. For example, this will happen because the operating system looks for such properties in the CPU node it is trying to bring up, so that it can create an OPP table. Add such missing properties. Fix other missing properties (like, clock latency, voltage tolerance, etc) as well to make it all work. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-06-11Merge tag 'armsoc-late' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC late updates from Olof Johansson: "This is a branch with a few merge requests that either came in late, or took a while longer for us to review and merge than usual and thus cut it a bit close to the merge window. We stage them in a separate branch and if things look good, we still send them up -- and that's the case here. This is mostly DT additions for Renesas platforms, adding IP block descriptions for existing and new SoCs. There are also some driver updates for Qualcomm platforms for SMEM/QMI and GENI, which is their generalized serial protocol interface" * tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (186 commits) soc: qcom: smem: introduce qcom_smem_virt_to_phys() soc: qcom: qmi: fix a buffer sizing bug MAINTAINERS: Update pattern for qcom_scm soc: Unconditionally include qcom Makefile soc: qcom: smem: check sooner in qcom_smem_set_global_partition() soc: qcom: smem: fix qcom_smem_set_global_partition() soc: qcom: smem: fix off-by-one error in qcom_smem_alloc_private() soc: qcom: smem: byte swap values properly soc: qcom: smem: return proper type for cached entry functions soc: qcom: smem: fix first cache entry calculation soc: qcom: cmd-db: Make endian-agnostic drivers: qcom: add command DB driver arm64: dts: renesas: salvator-common: Add ADV7482 support ARM: dts: r8a7740: Add CEU1 ARM: dts: r8a7740: Add CEU0 arm64: dts: renesas: salvator-common: enable VIN arm64: dts: renesas: r8a77970: add VIN and CSI-2 nodes arm64: dts: renesas: r8a77965: add VIN and CSI-2 nodes arm64: dts: renesas: r8a7796: add VIN and CSI-2 nodes arm64: dts: renesas: r8a7795-es1: add CSI-2 node ...
2018-05-14ARM: dts: r8a7793: Add PMU device nodeGeert Uytterhoeven
Enable support for the ARM Performance Monitor Units in the Cortex-A15 CPU cores on R-Car M2-N by adding a device node for the PMU. New Linux output: hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-04-25ARM: dts: r8a7793: Add RWDT nodeGeert Uytterhoeven
Add a device node for the Watchdog Timer (WDT) controller on the Renesas R-Car M2-N (r8a7793) SoC. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-04-25ARM: dts: r8a7793: Adjust SMP routine sizeFabrizio Castro
This patch adjusts the definition of the SMP routine size according to the latest changes made by commit: "ARM: shmobile: Add watchdog support" Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Signed-off-by: Ramesh Shanmugasundaram <ramesh.shanmugasundaram@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-04-25ARM: dts: renesas: r8a7793: Add FDP1 instancesLaurent Pinchart
The r8a7793 has two FDP1 instances. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-04-23ARM: dts: r8a7793: Convert to new LVDS DT bindingsLaurent Pinchart
The internal LVDS encoder now has DT bindings separate from the DU. Port the device tree over to the new model. Fixes: c6a27fa41fab ("drm: rcar-du: Convert LVDS encoder code to bridge driver") Fixes: bff8f8c2feb7 ("ARM: dts: r8a7793: add soc node") Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-02-12ARM: dts: r8a7793: consistently use single space before =Simon Horman
Consistently use a single space before a =. This patch fixes instances where a tab is used instead. This patch should not introduce any functional change. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
2018-02-12ARM: dts: r8a7793: sort subnodes of root nodeSimon Horman
Sort the subnodes of the soc node to improve maintainability. The sort key is the address on the bus with instances of the same IP block grouped together. This patch should not introduce any functional change. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
2018-02-12ARM: dts: r8a7793: sort subnodes of soc nodeSimon Horman
Sort the subnodes of the soc node to improve maintainability. The sort key is the address on the bus with instances of the same IP block grouped together. This patch should not introduce any functional change. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
2018-02-12ARM: dts: r8a7793: add soc nodeSimon Horman
Add soc node to represent the bus and move all nodes with a base address into this node. This is consistent with handling of R-Car Gen3, RZ/G1, and R-Car V2H (R8A77920) SoCs upstream. It is intended to migrate other R-Car Gen2 SoCs to this scheme. The ordering is derived from simply moving each node with an address up to before any nodes without a base address that occur before the soc node. To improve maintainability follow-up patches will sort subnodes of both the new soc node and the root node. This patch should not introduce any functional change. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
2018-02-12ARM: dts: r8a7793: consistently use single space after =Simon Horman
Consistently use a single space after a =. This patch removes instances where a tab is used instead. It also avoids running over 80 columns in width in one of the lines where whitespace is updated. This patch should not introduce any functional change. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
2018-02-12ARM: dts: r8a7793: Reduce size of thermal registersSimon Horman
Reduce size of thermal registers in DT for r8a7793 (R-Car M3-N) SoC. According to the "User's Manual: Hardware" v2.00 the registers at base 0xe61f0000 extend to an offset of 0x10, rather than 0x14 which is the case on the r8a73a4 (R-Mobile APE6). This should not have any runtime affect as mapping granularity is PAGE_SIZE. Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-01-04Merge tag 'renesas-dt2-for-v4.16' of ↵Olof Johansson
https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt Second Round of Renesas ARM Based SoC DT Updates for v4.16 * r8a7745 (RZ/G1E) SoC - Enable SMP Fabrizio Castro says "Add DT node for the Advanced Power Management Unit (APMU), add the second CPU core, and use "renesas,apmu" as "enable-method"." * r8a7743 (RZ/G1M) SoC - Add node for thermal sensor module with thermal-zone support * r8a7743 (RZ/G1M) and r8a7745 (RZ/G1E) SoCs - Add: + Renesas Core Match Timer (CMT) support + Renesas Timer Pulse Unit PWM Controller (TPU) support + Renesas PWM Timer Controller (PWM) support * r8a7743 (RZ/G1M) iW-RainboW-G20D-Qseven and r8a7745 (RZ/G1E) iW-RainboW-G22D development platforms - Add sound support * r8a7743 (RZ/G1M), r8a7745 (RZ/G1E) and r8a7792 (R-Car V2H) SoCs - Allow DTBs of boards of these SoCs to build without any warnings when compiled with W=1 using gcc-linaro-5.4.1-2017.05 + Move nodes which have no reg property out of bus, they don't belong there + Also sort sub-nodes of root node to allow for easier maintenance * r8a7790 (R-Car H2), r8a7791 (R-Car M2-W) and r8a7793 (R-Car M2-N) SoCs - Correct critical CPU temperature Chris Paterson says "The current R-Car Gen2 device trees define the CPU critical temperature as 115°C. The R-Car hardware manuals state that Tc = –40°C to +105°C. The thermal sensor has an accuracy of ±5°C and there can be a temperature difference of 1 or 2 degrees between Tjmax and the thermal sensor due to the location of the latter. This means that 95°C is a safer value to use. This value should also apply to r8a7792 but thermal sensor support has not been added yet." * r8a7740 (R-Mobile A1) SoC - Correct TPU register block size Geert Uytterhoven says "The Timer Pulse Unit has registers that lie outside the declared register block. Enlarge the register block size to fix this. This was probably based on the old platform code, which also assumed a register block size of 0x100." * tag 'renesas-dt2-for-v4.16' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (37 commits) ARM: dts: r8a7745: Add missing clock for secondary CA7 CPU core ARM: dts: iwg22d-sodimm: Sound DMA support via DVC on DTS ARM: dts: iwg22d-sodimm: Sound DMA support via SRC on DTS ARM: dts: iwg22d-sodimm: Sound DMA support via BUSIF on DTS ARM: dts: iwg22d-sodimm: Sound DMA support on DTS ARM: dts: iwg22d-sodimm: Sound PIO support ARM: dts: iwg22d-sodimm: Enable SGTL5000 audio codec ARM: dts: r8a7745: Add sound support ARM: dts: r8a7745: Add audio DMAC support ARM: dts: r8a7745: Add audio clocks ARM: dts: r8a7740: Correct TPU register block size ARM: dts: r8a7743: move timer and thermal-zones nodes out of bus ARM: dts: r8a7743: sort root sub-nodes alphabetically ARM: dts: iwg20d-q7-common: Sound DMA support via DVC on DTS ARM: dts: iwg20d-q7-common: Sound DMA support via SRC on DTS ARM: dts: iwg20d-q7-common: Sound DMA support via BUSIF on DTS ARM: dts: iwg20d-q7-common: Sound DMA support on DTS ARM: dts: iwg20d-q7-common: Sound PIO support ARM: dts: iwg20d-q7-common: Enable SGTL5000 audio codec ARM: dts: r8a7792: move timer node out of bus ... Signed-off-by: Olof Johansson <olof@lixom.net>
2017-12-21Merge tag 'renesas-dt-for-v4.16' of ↵Arnd Bergmann
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt Pull "Renesas ARM Based SoC DT Updates for v4.16" from Simon Horman: * Convert to named i2c-gpio bindings Geert Uytterhoeven says "Commits 7d29f509d2cfd807 ("dt-bindings: i2c: i2c-gpio: Add support for named gpios") and 05c74778858d7d99 ("i2c: gpio: Add support for named gpios in DT") introduced named i2c-gpio DT bindings, and deprecated the more error-prone unnamed variant. This patch series switches all Renesas boards to the new bindings, and adds the missing GPIO_OPEN_DRAIN I/O flags, which were implicitly assumed before..." ... Note that after this series is applied, the i2c-gpio buses are no longer detected when booting new DTBs on old (v4.14 and older) kernels, which should not be an issue. Booting old DTBs on new kernels is not affected." * Update DTS for CMT DT binding rework Geert Uytterhoeven says "This patch series updates the CMT device nodes in the various Renesas DTS files sh_cmt clocksource driver for the recent DT binding rework that was merged in v4.14-rc1 and v4.15-rc1..." * Add SMP support to r8a7794 (R-Car E2) SoC Sergei Shtylyov says "Add the device tree node for the Advanced Power Management Unit (APMU). Use the "enable-method" prop to point out that the APMU should be used for the SMP support." * Correct primary compatible value for eeprom on r7s72100 (RZ/A1H) genmai and r8a7791 (R-Car M2-W) koelsh boards Geert Uytterhoeven says "The Renesas part numbers of the two-wire serial interface EEPROMs do not follow the 24Cxx pattern, but the R1EX24xxx pattern. Hence change the primary compatible values to the appropriate variant of "renesas,r1ex24xxx", like is already done on Gose."" * Move cec_clock to root node on r8a7791 (R-Car M2-W) koelsh board r8a7791 (R-Car M2-W) koelsh board * Use R-Car SDHI and Ether Gen1 and 2 fallback compat strings Use recently posted R-Car SDHI and Ether Gen 1 and 2 fallback compat strings in the DT of Renesas ARM based SoCs. * Add IIC cores to dtsi of r8a7745 (RZ/G1E) SoC * Rework DT architecture for r8a7745 (RZ/G1E) iW-RainboW-G22D development platform and add serial support. Fabrizio Castro says "... define a new DT architecture for the iW-RainboW-G22D SODIMM Development Platform to include the configuration with the HDMI daughter board and to define the serial interfaces." * Add USB function support to r8a7745 (RZ/G1E) iW-RainboW-G22D development platform * Add PCIEC and ttySC3 support to r8a7743 (RZ/G1M) iW-RainboW-G20M-Qseven SoM * Add VIN support to r8a7743 (RZ/G1M) and r8a7745 (RZ/G1E) SoCs * Add CAN and HDMI support to r8a7743 (RZ/G1M) iW-RainboW-G20D-Qseven and r8a7745 (RZ/G1E) iW-RainboW-G22D development platforms * tag 'renesas-dt-for-v4.16' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (61 commits) ARM: dts: alt: Convert to named i2c-gpio bindings ARM: dts: koelsch: Convert to named i2c-gpio bindings ARM: dts: lager: Convert to named i2c-gpio bindings ARM: dts: armadillo800eva: Convert to named i2c-gpio bindings ARM: dts: sh73a0: Remove CMT renesas,channels-mask ARM: dts: r8a7794: Remove CMT renesas,channels-mask ARM: dts: r8a7793: Remove CMT renesas,channels-mask ARM: dts: r8a7791: Remove CMT renesas,channels-mask ARM: dts: r8a7790: Remove CMT renesas,channels-mask ARM: dts: r8a7740: Remove CMT renesas,channels-mask ARM: dts: r8a73a4: Remove CMT renesas,channels-mask ARM: dts: r8a7794: Update CMT compat strings ARM: dts: r8a7793: Update CMT compat strings ARM: dts: r8a7791: Update CMT compat strings ARM: dts: r8a7790: Update CMT compat strings ARM: dts: r8a73a4: Update CMT compat string ARM: dts: r8a7794: Add SMP support ARM: dts: genmai: Correct primary compatible value for eeprom ARM: dts: koelsch: Correct primary compatible value for eeprom ARM: dts: r8a7745: add VIN dt support ...
2017-12-18ARM: dts: r8a7793: Correct critical CPU temperatureChris Paterson
The R-Car M2N hardware manual states that Tc = –40°C to +105°C. The thermal sensor has an accuracy of ±5°C and there can be a temperature difference of 1 or 2 degrees between Tjmax and the thermal sensor due to the location of the latter. This means that 95°C is a safer value to use. Fixes: 57f9156bc620ac56 ("ARM: dts: r8a7793: enable to use thermal-zone") Signed-off-by: Chris Paterson <chris.paterson2@renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-11-29ARM: dts: r8a7793: Remove CMT renesas,channels-maskMagnus Damm
Update the DTS to remove the now deprecated "renesas,channels-mask" property. The channel information is now kept in the device driver and can easily be determined based on the compat string. Signed-off-by: Magnus Damm <damm+renesas@opensource.se> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-11-29ARM: dts: r8a7793: Update CMT compat stringsMagnus Damm
Use recently updated R-Car Gen2 CMT0 and CMT1 compat strings. With this change in place we can keep device-specific configuration in the driver and the driver can be able to support CMT1 specific features. Signed-off-by: Magnus Damm <damm+renesas@opensource.se> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-11-27ARM: dts: r8a7793: Use R-Car SDHI Gen2 fallback compat stringSimon Horman
Use newly added R-Car SDHI Gen2 fallback compat string in the DT of the r8a7793 SoC. This should have no run-time effect as the driver matches against the per-SoC compat string before considering the fallback compat string. Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-11-27ARM: dts: r8a7793: Use R-Car Gen2 Ether fallback compat stringSimon Horman
Use newly added R-Car Gen2 Ether fallback compat string in the DT of the r8a7793 SoC. This should have no run-time effect as the driver matches against the per-SoC compat string before considering the fallback compat string. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
2017-11-20ARM: dts: r8a779x: Add '#reset-cells' in cpg-mssrArnd Bergmann
With the latest dtc, we get many warnings about the missing '#reset-cells' property in these controllers, e.g.: arch/arm/boot/dts/r8a7790-lager.dtb: Warning (resets_property): Missing property '#reset-cells' in node /clock-controller@e6150000 or bad phandle (referred from /can@e6e80000:resets[0]) arch/arm/boot/dts/r8a7792-blanche.dtb: Warning (resets_property): Missing property '#reset-cells' in node /soc/clock-controller@e6150000 or bad phandle (referred from /soc/dma-controller@e6700000:resets[0]) arch/arm/boot/dts/r8a7792-wheat.dtb: Warning (resets_property): Missing property '#reset-cells' in node /soc/clock-controller@e6150000 or bad phandle (referred from /soc/ethernet@e6800000:resets[0]) arch/arm/boot/dts/r8a7793-gose.dtb: Warning (resets_property): Missing property '#reset-cells' in node /clock-controller@e6150000 or bad phandle (referred from /gpio@e6050000:resets[0]) arch/arm/boot/dts/r8a7794-alt.dtb: Warning (resets_property): Missing property '#reset-cells' in node /clock-controller@e6150000 or bad phandle (referred from /i2c@e6500000:resets[0]) arch/arm/boot/dts/r8a7794-silk.dtb: Warning (resets_property): Missing property '#reset-cells' in node /clock-controller@e6150000 or bad phandle (referred from /interrupt-controller@e61c0000:resets[0]) This adds it for the three r8a779x chips that were lacking it. The binding mandates this as <1>, so this is the value I use. Signed-off-by: Arnd Bergmann <arnd@arndb.de> [geert: Add fix for r8a7793.dtsi] Fixes: 34fbd2b12761d111 ("ARM: dts: r8a7790: Add reset control properties") Fixes: 6e11a322f1d7505d ("ARM: dts: r8a7792: Add reset control properties") Fixes: 84fb19e1d201ba86 ("ARM: dts: r8a7793: Add reset control properties") Fixes: 615beb759ca494a4 ("ARM: dts: r8a7794: Add reset control properties") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-10-16ARM: dts: r8a7793: Add missing clock for secondary CA15 CPU coreGeert Uytterhoeven
Currently only the primary CPU in the CA15 cluster has a clocks property, while the secondary CPU core is driven by the same clock. Add the missing clocks property to fix this. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-10-16ARM: dts: r8a7793: Use R-Car GPIO Gen2 fallback compat stringSimon Horman
Use newly added R-Car GPIO Gen2 fallback compat string in place of now deprecated non-generation specific R-Car GPIO fallback compat string in the DT of the r8a7793 SoC. This should have no run-time effect as the driver matches against the per-SoC compat string before considering the fallback compat string. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
2017-09-19ARM: dts: r8a7793: Add reset control propertiesGeert Uytterhoeven
Add properties to describe the reset topology for on-SoC devices: - Add the "#reset-cells" property to the CPG/MSSR device node, - Add resets and reset-names properties to the various device nodes. This allows to reset SoC devices using the Reset Controller API. Note that resets usually match the corresponding module clocks. Exceptions are: - The audio module has resets for the Serial Sound Interfaces only, - The display module has only a single reset for all DU channels, but adding reset properties for the display is postponed. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-09-18ARM: dts: r8a7793: Stop grouping clocks under a "clocks" subnodeGeert Uytterhoeven
The current practice is to not group clocks under a "clocks" subnode, but just put them together with the other on-SoC devices. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-09-18ARM: dts: r8a7793: Convert to new CPG/MSSR bindingsGeert Uytterhoeven
Convert the R-Car M2-N SoC from the old "Renesas R-Car Gen2 Clock Pulse Generator (CPG)", "Renesas CPG DIV6 Clock", and "Renesas CPG Module Stop (MSTP) Clocks" DT bindings to the new unified "Renesas Clock Pulse Generator / Module Standby and Software Reset" DT bindings. This simplifies the DTS files, and allows to add support for reset control later. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-07-27ARM: dts: r8a7793: Reserve SRAM for the SMP jump stubGeert Uytterhoeven
Reserve SRAM for the jump stub for CPU core bringup. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-07-27ARM: dts: r8a7793: Add Inter Connect RAMGeert Uytterhoeven
R-Car M2-N has 2 regions of Inter Connect RAM (72 + 4 KiB). Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-05-15ARM: dts: r8a7793: set maximum frequency for SDHI clocksSimon Horman
Define the upper limit otherwise the driver cannot utilize max speeds. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
2017-05-15ARM: dts: r8a7793: update PFC node name to pin-controllerSimon Horman
The device trees for Renesas SoCs use either pfc or pin-controller as the node name for the PFC device. This patch is intended to take a step towards unifying the node name used as pin-controller which appears to be the more generic of the two and thus more in keeping with the DT specs. My analysis is that this is a user-visible change to the extent that kernel logs, and sysfs entries change from e6060000.pfc and pfc@e6060000 to e6060000.pin-controller and pin-controller@e6060000. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
2017-04-03ARM: dts: r8a7793: Correct parent of SSI[0-9] clocksGeert Uytterhoeven
The SSI-ALL gate clock is located in between the P clock and the individual SSI[0-9] clocks, hence the former should be listed as their parent. Fixes: 072d326542e49187 ("ARM: dts: r8a7793: add MSTP10 clocks to device tree") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-03-13ARM: dts: r8a7793: Add INTC-SYS clock to device treeGeert Uytterhoeven
Link the ARM GIC to the INTC-SYS module clock, and add it to the "always on" PM Domain, so it can be power managed using that clock. Note that currently the GIC-400 driver doesn't support module clocks nor Runtime PM, so this must be handled as a critical clock. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-03-10ARM: dts: r8a7793: Tidyup Audio-DMAC channel for DVCKuninori Morimoto
Current Audio-DMAC is assigned "rx" as Audio-DMAC0, "tx" as Audio-DMAC1. Thus, DVC "tx" should be assigned as Audio-DMAC1, instead of Audio-DMAC0. Because of this, current platform board (using SRC/DVC/SSI) Playback/Capture both will use same Audio-DMAC0 (but it depends on audio data path). First note is that this "rx" and "tx" are from each IP point, it doesn't mean Playback/Capture. Second note is that Audio DMAC assigned on DT is only for Audio-DMAC, Audio-DMAC-peri-peri has no entry. => Audio-DMAC -> Audio-DMAC-peri-peri -- HW connection Playback case [Mem] => [SRC]--[DVC] -> [SSI]--[Codec] rx ~~~~~~~~~~~~ Capture [Mem] <= [DVC]--[SRC] <- [SSI]--[Codec] tx ~~~~~~~~~~~~ Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-03-07ARM: dts: r8a7793: Remove unit-address and reg from integrated cacheGeert Uytterhoeven
The Cortex-A15 cache controller is an integrated controller, and thus the device node representing it should not have a unit-addresses or reg property. Fixes: ad53f5f00b095a0d ("ARM: dts: r8a7793: Fix W=1 dtc warnings") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-02-07ARM: DTS: Fix register map for virt-capable GICMarc Zyngier
Since everybody copied my own mistake from the DT binding example, let's address all the offenders in one swift go. Most of them got the CPU interface size wrong (4kB, while it should be 8kB), except for both keystone platforms which got the control interface wrong (4kB instead of 8kB). In a few cases where I knew for sure what implementation was used, I've added the "arm,gic-400" compatible string. I'm 99% sure that this is what everyone is using, but short of having the TRM for all the other SoCs, I've left them alone. Acked-by: Shawn Guo <shawnguo@kernel.org> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Santosh Shilimkar <ssantosh@kernel.org> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Antoine Tenart <antoine.tenart@free-electrons.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Matthias Brugger <matthias.bgg@gmail.com> Acked-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2017-01-03ARM: dts: r8a7793: Use R-Car Gen 2 fallback binding for iic nodesSimon Horman
Use recently added R-Car Gen 2 fallback binding for iic nodes in DT for r8a7793 SoC. This has no run-time effect for the current driver as the initialisation sequence is the same for the SoC-specific binding for r8a7793 and the fallback binding for R-Car Gen 2. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
generated by cgit (git 2.34.1) at 2024-06-19 20:35:50 +0000