summaryrefslogtreecommitdiff
path: root/arch/arm/boot/dts/sun5i-a13-olinuxino.dts
AgeCommit message (Collapse)Author
2019-04-04ARM: dts: sunxi: Remove pinctrl groups setting biasMaxime Ripard
So far we've enabled pull-up and pull-down resistors on GPIOs using a pinctrl node. Now that the GPIO binding allows for a flag to declare this, let's switch to it. This brings us closer to removing all the GPIO pinctrl nodes, which will in turn allow us to switch the pinctrl strict mode on. Acked-by: Chen-Yu Tsai <wens@csie.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-03-25ARM: sunxi: Fix the USB PHY VBUS detect GPIO propertiesMaxime Ripard
While the USB PHY Device Tree mandates that the name of the VBUS detect pin should be usb0_vbus_det-gpios, a significant number of device tree use usb0_vbus_det-gpio instead. This was functional because the GPIO framework falls back to the gpio suffix that is legacy, but we should fix this. Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-03-25ARM: sunxi: Fix the USB PHY ID detect GPIO propertiesMaxime Ripard
While the USB PHY Device Tree mandates that the name of the ID detect pin should be usb0_id_det-gpios, a significant number of device tree use usb0_id_det-gpio instead. This was functional because the GPIO framework falls back to the gpio suffix that is legacy, but we should fix this. Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-03-25ARM: dts: sun5i: Fix Display Engine DTC warningsMaxime Ripard
Our display engine endpoints trigger some DTC warnings due to the fact that we're having a single endpoint that doesn't need any reg property, and since we don't have a reg property, we don't need the address-cells and size-cells properties anymore. Fix those Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-11-28ARM: dts: sun5i: Provide default muxing for relevant controllersMaxime Ripard
The I2C's, MMC0 and MMC1 controllers have only one muxing option in the SoC. In such a case, we can just move the muxing into the DTSI, and remove it from the DTS. Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Acked-by: Chen-Yu Tsai <wens@csie.org>
2018-11-28ARM: dts: sun5i: Remove underscores from nodes namesMaxime Ripard
Some GPIO pinctrl nodes cannot be easily removed, because they would also change the pin configuration, for example to add a pull resistor or change the current delivered by the pin. Those nodes still have underscores and unit-addresses in their node names in our DTs, so adjust their name to remove the warnings. Use that occasion to also fix some poorly chosen node-names. Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Acked-by: Chen-Yu Tsai <wens@csie.org>
2018-11-28ARM: dts: sun5i: Change pinctrl nodes to avoid warningMaxime Ripard
All our pinctrl nodes were using a node name convention with a unit-address to differentiate the different muxing options. However, since those nodes didn't have a reg property, they were generating warnings in DTC. In order to accomodate for this, convert the old nodes to the syntax we've been using for the new SoCs, including removing the letter suffix of the node labels to the bank of those pins to make things more readable. Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Acked-by: Chen-Yu Tsai <wens@csie.org>
2018-11-28ARM: dts: sun5i: Remove card detect pull-upMaxime Ripard
Boards usually have an external pull-up on the card-detect signal, so there's no need to add another one. This also removes a DTC warning. Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Acked-by: Chen-Yu Tsai <wens@csie.org>
2018-11-28ARM: dts: sun5i: Remove all useless pinctrl nodesMaxime Ripard
The gpio pinctrl nodes are redundant and as such useless most of the times. Since they will also generate warnings in DTC, we can simply remove most of them. Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Acked-by: Chen-Yu Tsai <wens@csie.org>
2018-11-28ARM: dts: sun5i: Change LRADC node names to avoid warningsMaxime Ripard
One of the usage of the LRADC is to implement buttons. The bindings define that we should have one subnode per button, with their associated voltage as a property. However, there was no reg property but we still used the voltage associated to the button as the unit-address, which eventually generated warnings in DTC. Rename the node names to avoid those warnings. Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Acked-by: Chen-Yu Tsai <wens@csie.org>
2018-02-13ARM: dts: sunxi: Switch MMC nodes away from cd-inverted propertyTuomas Tynkkynen
Using the cd-inverted property is not useful when GPIOs are used as card detects since the polarity can be specified with the usual GPIO_ACTIVE_(HIGH|LOW) GPIO flags. It has also caused confusion for U-Boot developers, so migrate all sunxi boards away from cd-inverted. Signed-off-by: Tuomas Tynkkynen <tuomas@tuxera.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2017-11-27ARM: dts: sunxi: Add codec for A13 OlinuxinoEmmanuel Vadot
The A13 Olinuxino have an headphone jack and audio is supported so enable it. Signed-off-by: Emmanuel Vadot <manu@freebsd.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-05-14ARM: sunxi: common-regulators: Drop pinmux settings for GPIO pinsChen-Yu Tsai
As part of our effort to move pinctrl/GPIO interlocking into the driver where it belongs, this patch drops the definition and usage of the pinmux settings for the common regulators defined in sunxi-common-regulators.dtsi. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-03-27ARM: dts: sunxi: Remove no longer used pinctrl/sun4i-a10.h headerChen-Yu Tsai
All dts files for the sunxi platform have been switched to the generic pinconf bindings. As a result, the sunxi specific pinctrl macros are no longer used. Remove the #include entry with the following command: sed --follow-symlinks -i -e '/pinctrl\/sun4i-a10.h/D' \ arch/arm/boot/dts/sun?i*.* arch/arm/boot/dts/sun9i-a80.dtsi was then edited to remove the extra empty line. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-12-26ARM: sunxi: Convert pinctrl nodes to generic bindingsMaxime Ripard
Now that we can handle the generic pinctrl bindings, convert our DT to it. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Chen-Yu Tsai <wens@csie.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
2016-12-26ARM: sunxi: Remove useless allwinner,pull propertyMaxime Ripard
The allwinner,pull property set to NO_PULL was really considered our default (and wasn't even changing the default value in the code). Remove these properties to make it obvious that we do not set anything in such a case. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Chen-Yu Tsai <wens@csie.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
2016-12-26ARM: sunxi: Remove useless allwinner,drive propertyMaxime Ripard
The allwinner,drive property set to 10mA was really considered as our default. Remove all those properties entirely to make that obvious. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Chen-Yu Tsai <wens@csie.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
2016-11-22ARM: sun5i: a13-olinuxino: Enable VGA bridgeMaxime Ripard
Now that we have support for the VGA bridges using our DRM driver, enable the display engine for the Olimex A13-Olinuxino. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Chen-Yu Tsai <wens@csie.org>
2015-07-31ARM: dts: sun5i: Enable USB DRC on A13 OLinuxInoMark Janssen
Enable the otg/drc usb controller on the A13 OLinuxIno. Signed-off-by: Mark Janssen <mark@sig-io.nl> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-05-10ARM: sunxi: dt: Remove the FSF addressMaxime Ripard
The FSF address triggers a warning on checkpatch, saying that the FSF license is already present in the Linux source code, and that it has already changed in the past. Remove it from our DT, as suggested. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-04-27ARM: sunxi: DT: Add stdout-path propertyMaxime Ripard
Add UART aliases and stdout-path property for all the Allwinner boards so that we won't have to rely on the bootargs' console= value, while working with legacy bootloaders. While we're at it, also remove the mentions of earlyprintk in the bootargs, that will remove our default bootargs entirely, and allow the kernel to boot on a system even if DEBUG_LL is configured for another system. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-04-27ARM: sun5i: a13: olinuxino: Convert to DT label based syntaxMaxime Ripard
In order to lessen the amount of duplication of the DT tree, ease the new and follow the trend that prefers to use label based references when overriding DTSI nodes, convert the board to this syntax Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-02-17Merge tag 'dt-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC DT updates from Olof Johansson: "DT changes continue to be the bulk of our merge window contents. We continue to have a large set of changes across the board as new platforms and drivers are added. Some of the new platforms are: - Alphascale ASM9260 - Marvell Armada 388 - CSR Atlas7 - TI Davinci DM816x - Hisilicon HiP01 - ST STiH418 There have also been some sweeping changes, including relicensing of DTS contents from GPL to GPLv2+/X11 so that the same files can be reused in other non-GPL projects more easily. There's also been changes to the DT Makefile to make it a little less conflict-ridden and churny down the road" * tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (330 commits) ARM: dts: Add PPMU node for exynos4412-trats2 ARM: dts: Add PPMU node for exynos3250-monk and exynos3250-rinato ARM: dts: Add PPMU dt node for exynos4 and exynos4210 ARM: dts: Add PPMU dt node for exynos3250 ARM: dts: add mipi dsi device node for exynos4415 ARM: dts: add fimd device node for exynos4415 ARM: dts: Add syscon phandle to the video-phy node for Exynos4 ARM: dts: Add sound nodes for exynos4412-trats2 ARM: dts: Fix CLK_MOUT_CAMn parent clocks assignment for exynos4412-trats2 ARM: dts: Fix CLK_UART_ISP_SCLK clock assignment in exynos4x12.dtsi ARM: dts: Add max77693 charger node for exynos4412-trats2 ARM: dts: Switch max77686 regulators to GPIO control for exynos4412-trats2 ARM: dts: Add suspend configuration for max77686 regulators for exynos4412-trats2 ARM: dts: Add Maxim 77693 fuel gauge node for exynos4412-trats2 ARM: dts: am57xx-beagle-x15: Fix USB2 mode ARM: dts: am57xx-beagle-x15: Add extcon nodes for USB ARM: dts: dra72-evm: Add extcon nodes for USB ARM: dts: dra7-evm: Add extcon nodes for USB ARM: dts: rockchip: move the hdmi ddc-i2c-bus property to the actual boards ARM: dts: rockchip: enable vops and hdmi output on rk3288-firefly and -evb ...
2015-01-25ARM: sunxi: dt: Fix aliasesMaxime Ripard
Commit f77d55a3b56a ("serial: 8250_dw: get index of serial line from DT aliases") made the serial driver now use the serial aliases to get the tty number, pointing out that our aliases have been wrong all along. Remove them from the DTSI and add custom ones in the relevant boards. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-01-25ARM: dts: sun5i: Enable axp209 support on A13-OLinuxInoHans de Goede
The (non micro) A13-OLinuxIno has an axp203 pmic, enable support for this. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-01-21ARM: sunxi: DT: Convert the DTs to use a header for the pinctrl nodesMaxime Ripard
The pinctrl nodes require some extra opaque arguments for the pull up and drive strength values. Introduce a new header file and convert the device trees to replace these opaque numbers by defines. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-01-21ARM: sunxi: DT: convert DTs to use common GPIOs includesMaxime Ripard
Replace the various raw GPIO flags by their definition in the common dt-bindings header. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-01-21ARM: dts: sun5i: Add lradc nodeHans de Goede
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-11-07ARM: sun5i: olinuxino: Relicense the device tree under GPLv2/X11Maxime Ripard
The current GPL only licensing on the DTSI makes it very impractical for other software components licensed under another license. In order to make it easier for them to reuse our device trees, relicense our device trees under a GPL/X11 dual-license. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Olof Johansson <olof@lixom.net> Acked-by: Roman Byshko <rbyshko@gmail.com>
2014-05-11ARM: dts: sun5i: Add reg_vcc3v3 to sun5i board mmc nodesHans de Goede
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-05-04ARM: dts: sun5i: Enable mmc controller on various A10s and A13 boardsHans de Goede
The cd pin settings have been taken from the original firmware fex files, and have been confirmed to work on the actual boards. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-03-04ARM: sun5i: dt: Add USB host nodes to A13-OlinuxinoRoman Byshko
Add nodes for the usb-phy and ehci- and ohci-usb-host controllers. Signed-off-by: Roman Byshko <rbyshko@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2013-12-29ARM: sun4i: dt: Remove chosen nodesMaxime Ripard
The chosen nodes are nowadays pretty useless, since they will be overriden by the bootloader anyway. We can thus safely remove them. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2013-08-10ARM: sun5i: dt: Fix A13 SoC bus base addressMaxime Ripard
There was a typo in the base address used for the soc node in the A13 device tree. Fix it with the proper base address. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2013-06-15ARM: sun5i: olinuxino: Enable the i2c controllersMaxime Ripard
The A13-Olinuxino makes use of the 3 i2c controllers found on the Allwinner A13. Enable them in the device tree. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by: Tomasz Figa <tomasz.figa@gmail.com>
2013-04-08ARM: sunxi: dt: Reorganize the dtsiMaxime Ripard
In the early days, the A10 and A13 shared quite some code. Nowadays it shares less and less code, the A31 diverging even more, so it doesn't make much sense to continue to maintain this structure, just use one DTSI for every SoC, and that's it. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2013-03-29ARM: sunxi: Rename uart nodes to serialMaxime Ripard
The other architecture use serial@address for their uart nodes, so rename our uart dt nodes to be consistent Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2013-03-05sunxi: a13-olinuxino: Add user LED to the device treeMaxime Ripard
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2013-01-22ARM: sunxi: olinuxino: Add muxing for the uartMaxime Ripard
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-12-20ARM: sunxi: rename device tree source filesOlof Johansson
This is the rename portion of "ARM: sunxi: Change device tree naming scheme for sunxi" that were missed when the patch was applied. Signed-off-by: Olof Johansson <olof@lixom.net>
generated by cgit (git 2.34.1) at 2024-05-24 09:36:07 +0000