| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd BergmannL
"The introduction of vmap-stack on 32-bit arm caused a regression on a
few omap3/omap4 machines that pass a stack variable into a firmware
interface.
The early pre-ACPI AMD Seattle machines have been broken for a while,
Ard Biesheuvel has a series to bring them back for now.
A few machines with multiple DMA channels used on a device have the
channels in the wrong order according to the binding, which causes a
harmless warning. Reversing the order is easier than fixing the tools
to suppress the warning"
* tag 'soc-fixes-5.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
arm64: dts: ls1046a: Update i2c node dma properties
arm64: dts: ls1043a: Update i2c dma properties
ARM: dts: spear1340: Update serial node properties
ARM: dts: spear13xx: Update SPI dma properties
ARM: OMAP2+: Fix regression for smc calls for vmap stack
dt: amd-seattle: add a description of the CPUs and caches
dt: amd-seattle: disable IPMI controller and some GPIO blocks on B0
dt: amd-seattle: add description of the SATA/CCP SMMUs
dt: amd-seattle: add a description of the PCIe SMMU
dt: amd-seattle: fix PCIe legacy interrupt routing
dt: amd-seattle: upgrade AMD Seattle XGBE to new SMMU binding
dt: amd-seattle: remove Overdrive revision A0 support
dt: amd-seattle: remove Husky platform
|
|
Reorder dma and dma-names property for serial node to make it compliant
with bindings.
Fixes: 6e8887f60f60 ("ARM: SPEAr13xx: Pass generic DW DMAC platform data from DT")
Signed-off-by: Kuldeep Singh <singh.kuldeep87k@gmail.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://lore.kernel.org/r/20220326042313.97862-3-singh.kuldeep87k@gmail.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Reorder dmas and dma-names property for spi controller node to make it
compliant with bindings.
Fixes: 6e8887f60f60 ("ARM: SPEAr13xx: Pass generic DW DMAC platform data from DT")
Signed-off-by: Kuldeep Singh <singh.kuldeep87k@gmail.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://lore.kernel.org/r/20220326042313.97862-2-singh.kuldeep87k@gmail.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more power management updates from Rafael Wysocki:
"These update ARM cpufreq drivers, the OPP (Operating Performance
Points) library and the power management documentation.
Specifics:
- Add per core DVFS support for QCom SoC (Bjorn Andersson), convert
to yaml binding (Manivannan Sadhasivam) and various other fixes to
the QCom drivers (Luca Weiss).
- Add OPP table for imx7s SoC (Denys Drozdov) and minor fixes (Stefan
Agner).
- Fix CPPC driver's freq/performance conversions (Pierre Gondois).
- Minor generic cleanups (Yury Norov).
- Introduce opp-microwatt property to the OPP core, bindings, etc
(Lukasz Luba).
- Convert DT bindings to schema format and various related fixes
(Yassine Oudjana).
- Expose OPP's OF node in debugfs (Viresh Kumar).
- Add Intel uncore frequency scaling documentation file to its
MAINTAINERS entry (Srinivas Pandruvada).
- Clean up the AMD P-state driver documentation (Jan Engelhardt)"
* tag 'pm-5.18-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (24 commits)
Documentation: amd-pstate: grammar and sentence structure updates
dt-bindings: cpufreq: cpufreq-qcom-hw: Convert to YAML bindings
dt-bindings: dvfs: Use MediaTek CPUFREQ HW as an example
Documentation: EM: Describe new registration method using DT
OPP: Add support of "opp-microwatt" for EM registration
PM: EM: add macro to set .active_power() callback conditionally
OPP: Add "opp-microwatt" supporting code
dt-bindings: opp: Add "opp-microwatt" entry in the OPP
MAINTAINERS: Add additional file to uncore frequency control
cpufreq: blocklist Qualcomm sc8280xp and sa8540p in cpufreq-dt-platdev
cpufreq: qcom-hw: Add support for per-core-dcvs
dt-bindings: power: avs: qcom,cpr: Convert to DT schema
arm64: dts: qcom: qcs404: Rename CPU and CPR OPP tables
arm64: dts: qcom: msm8996: Rename cluster OPP tables
dt-bindings: opp: Convert qcom-nvmem-cpufreq to DT schema
dt-bindings: opp: qcom-opp: Convert to DT schema
arm64: dts: qcom: msm8996-mtp: Add msm8996 compatible
dt-bindings: arm: qcom: Add msm8996 and apq8096 compatibles
opp: Expose of-node's name in debugfs
cpufreq: CPPC: Fix performance/frequency conversion
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc and other driver updates from Greg KH:
"Here is the big set of char/misc and other small driver subsystem
updates for 5.18-rc1.
Included in here are merges from driver subsystems which contain:
- iio driver updates and new drivers
- fsi driver updates
- fpga driver updates
- habanalabs driver updates and support for new hardware
- soundwire driver updates and new drivers
- phy driver updates and new drivers
- coresight driver updates
- icc driver updates
Individual changes include:
- mei driver updates
- interconnect driver updates
- new PECI driver subsystem added
- vmci driver updates
- lots of tiny misc/char driver updates
All of these have been in linux-next for a while with no reported
problems"
* tag 'char-misc-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (556 commits)
firmware: google: Properly state IOMEM dependency
kgdbts: fix return value of __setup handler
firmware: sysfb: fix platform-device leak in error path
firmware: stratix10-svc: add missing callback parameter on RSU
arm64: dts: qcom: add non-secure domain property to fastrpc nodes
misc: fastrpc: Add dma handle implementation
misc: fastrpc: Add fdlist implementation
misc: fastrpc: Add helper function to get list and page
misc: fastrpc: Add support to secure memory map
dt-bindings: misc: add fastrpc domain vmid property
misc: fastrpc: check before loading process to the DSP
misc: fastrpc: add secure domain support
dt-bindings: misc: add property to support non-secure DSP
misc: fastrpc: Add support to get DSP capabilities
misc: fastrpc: add support for FASTRPC_IOCTL_MEM_MAP/UNMAP
misc: fastrpc: separate fastrpc device from channel context
dt-bindings: nvmem: brcm,nvram: add basic NVMEM cells
dt-bindings: nvmem: make "reg" property optional
nvmem: brcm_nvram: parse NVRAM content into NVMEM cells
nvmem: dt-bindings: Fix the error of dt-bindings check
...
|
|
Pull ARM devicetree updates from Arnd Bergmann:
"After a somewhat quiet 5.17 release, the size of the DT changes is a
bit larger again. There are nine new SoC that get added, all of them
related to existing platforms:
- Airoha (formerly Mediatek/EcoNet) EN7523 networking SoC and EVB
- Mediatek mt6582 tablet platform with the Prestigio PMT5008 3G
tablet
- Microchip Lan966 networking SoC and it evaluation board
- Qualcomm Snapdragon 625/632 midrange phone SoCs, with the LG Nexus
5X and Fairphone FP3 phones
- Renesas RZ/G2LC and RZ/V2L general-purpose embedded SoCs, along
with their evaluation boards
- Samsung Exynos 850 phone SoC and reference board
- Samsung Exynos7885 with the Samsung Galaxy A8 (2018) phone
- Tesla FSD (Fully Self-Driving), an automotive SoC loosely derived
from the Samsung Exynos family.
- TI K3/AM62 SoC and reference board
Support for additional functionality in existing dts files is added
all over the place: Samsung, Renesas, Mstar, wpcm450, OMAP, AT91,
Allwinner, i.MX, Tegra, Aspeed, Oxnas, Qualcomm, Mediatek, and
Broadcom.
Samsung has a rework for its pinctrl schema that is a bit tricky and
requires driver changes to be included here.
A few more platforms only have smaller cleanups and DT Schema fixes,
this includes SoCFPGA, ux500, ixp4xx, STi, Xilinx Zynq, LG, and Juno.
The new machines are really too many to list, but I'll do it anyway:
Allwinner:
- A20-Marsboard development board
Amlogic:
- Amediatek X96-AIR (Amlogic S905X3)
- CYX A95XF3-AIR (Amlogic S905X3)
- Haochuangy H96-Max (Amlogic S905X3)
- Amlogic AQ222 (Amlogic S4)
- OSMC Vero 4K+ (Amlogic S905D)
Arm Juno:
- Separate DT depending on SCMI firmware version
Aspeed:
- Quanta S6Q BMC (AST2600)
- ASRock ROMED8HM3 (AST2500)
Broadcom:
- Raspberry Pi Zero 2 W
Marvell MVEBU/Armada:
- Ctera C200 V1 NAS (kirkwood)
- Ctera C200 V2 NAS (armada-370)
Mstar:
- DongShanPiOne, a low-end embedded board
- Miyoo Mini handheld game console
NXP i.MX:
- Numerous i.MX8M Mini based boards in even more variations, but
none based on other SoCs this time:
Protonic PRT8MM, emCON-MX8M Mini, Toradex Verdin, and
Gateworks GW7903
Qualcomm:
- Google Herobrine R1 Chromebook platform (Snapdragon 7c Gen 3)
- SHIFT6mq phone (Snapdragon 845)
- Samsung Galaxy Book2 (Snapdragon 850)
- Snapdragon 8 Gen 1 Hardware Development Kit
TI OMAP:
- SanCloud BeagleBone Enhanced WiFi
Rockchip:
- Pine64 PineNote ereader tablet (rk356x)
- Bananapi-R2-Pro (rk356x)
STM32:
- emtrion emSBS-Argon embedded board (stm32mp157c)"
* tag 'arm-dt-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (627 commits)
arm64: dts: n5x: drop invalid property and fix edac node name
arm64: dts: fsd: Add the MCT support
arm64: dts: stingray: Fix spi clock name
arm64: dts: ns2: Fix spi clock name
ARM: dts: rockchip: Update regulator name for PX3
ARM: dts: rockchip: Add #clock-cells value for rk805
arm64: dts: rockchip: Add #clock-cells value for rk805
arm64: dts: rockchip: Remove vcc13 and vcc14 for rk808
arm64: dts: rockchip: Fix SDIO regulator supply properties on rk3399-firefly
ARM: dts: at91: sama7g5: Add NAND support
ARM: dts: at91: sama7g5: add eic node
ARM: dts: at91: sama7g5: Remove unused properties in i2c nodes
ARM: dts: at91: sam9x60ek: modify vdd_1v5 regulator to vdd_1v15
arm64: dts: lg: align pl330 node name with dtschema
arm64: dts: lg: add dma-cells to pl330 node
arm64: dts: juno: align pl330 node name with dtschema
arm64: dts: broadcom: Fix sata nodename
arm64: dts: n5x: add sdr edac support
arm64: dts: agilex/stratix10: add clock-names to USB DWC2 node
dt-bindings: usb: dwc2: add disable-over-current
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"It's been a fairly calm development cycle. There are a few last-minute
ALSA core fixes, most notably for covering PCM ioctl races, but the
most of rest are device-specific changes.
Below are some highlights:
ALSA core:
- Fixes for PCM ioctl races that may lead to UAF
- Fix for oversized allocations in PCM OSS layer
ASoC:
- Start of moving SoF to support multiple IPC mechanisms
- Use of NHLT ACPI table to reduce the amount of quirking required
for Intel systems
- Preliminary works forthcoming Intel AVS driver for legacy Intel DSP
firmwares
- Support for AMD PDM, Atmel PDMC, Awinic AW8738, i.MX cards with
TLV320AIC31xx, Intel machines with CS35L41 and ESSX8336, Mediatek
MT8181 wideband bluetooth, nVidia Tegra234, Qualcomm SC7280,
Renesas RZ/V2L, Texas Instruments TAS585M
HD-audio:
- Driver re-binding fix for HD-audio
- Updates for Intel ADL and Tegra234, various platform quirks for
Dell, HP, Lenovo, ASUS, Samsung and Clevo machines
USB-audio:
- Quirk updates for Scarlett2, RODE, Corsair devices"
* tag 'sound-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (486 commits)
ALSA: hda/realtek: Add alc256-samsung-headphone fixup
ALSA: pci: fix reading of swapped values from pcmreg in AC97 codec
ALSA: pcm: Add stream lock during PCM reset ioctl operations
ALSA: pcm: Fix races among concurrent prealloc proc writes
ALSA: pcm: Fix races among concurrent prepare and hw_params/hw_free calls
ALSA: pcm: Fix races among concurrent read/write and buffer changes
ALSA: pcm: Fix races among concurrent hw_params and hw_free calls
ASoC: atmel: mchp-pdmc: print the correct property name
MAINTAINERS: Add Shengjiu to maintainer list of sound/soc/fsl
ASoC: SOF: Add a new dai_get_clk topology IPC op
ASoC: SOF: topology: Add ops for setting up and tearing down pipelines
ASoC: SOF: expose sof_route_setup()
ASoC: SOF: Add dai_link_fixup PCM op for IPC3
ASoC: SOF: Add trigger PCM op for IPC3
ASoC: SOF: Define hw_params PCM op for IPC3
ASoC: SOF: Introduce IPC3 PCM hw_free op
ASoC: SOF: pcm: expose the sof_pcm_setup_connected_widgets() function
ASoC: SOF: Introduce IPC-specific PCM ops
ASoC: SOF: Add bytes_ext control IPC ops for IPC3
ASoC: SOF: Add bytes_get/put control IPC ops for IPC3
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm
Pull ARM cpufreq updates for 5.18-rc1 fron Viresh Kumar:
"- Add per core DVFS support for QCom SoC (Bjorn Andersson), convert to yaml
binding (Manivannan Sadhasivam) and various other fixes to the QCom drivers
(Luca Weiss).
- Add OPP table for imx7s SoC (Denys Drozdov) and minor fixes (Stefan Agner).
- Fix CPPC driver's freq/performance conversions (Pierre Gondois).
- Minor generic cleanups (Yury Norov)."
* 'cpufreq/arm/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
dt-bindings: cpufreq: cpufreq-qcom-hw: Convert to YAML bindings
dt-bindings: dvfs: Use MediaTek CPUFREQ HW as an example
cpufreq: blocklist Qualcomm sc8280xp and sa8540p in cpufreq-dt-platdev
cpufreq: qcom-hw: Add support for per-core-dcvs
cpufreq: CPPC: Fix performance/frequency conversion
cpufreq: Add i.MX7S to cpufreq-dt-platdev blocklist
ARM: dts: imx7s: Define operating points table for cpufreq
cpufreq: qcom-cpufreq-nvmem: fix reading of PVS Valid fuse
cpufreq: replace cpumask_weight with cpumask_empty where appropriate
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer and timekeeping updates from Thomas Gleixner:
"Core code:
- Make the NOHZ handling of the timekeeping/tick core more robust to
prevent a rare jiffies update stall.
- Handle softirqs in the NOHZ/idle case correctly
Drivers:
- Add support for event stream scaling of the 1GHz counter on ARM(64)
- Correct an error code check in the timer-of layer
- The usual cleanups and improvements all over the place"
* tag 'timers-core-2022-03-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits)
lib/irq_poll: Declare IRQ_POLL softirq vector as ksoftirqd-parking safe
tick/rcu: Stop allowing RCU_SOFTIRQ in idle
tick/rcu: Remove obsolete rcu_needs_cpu() parameters
tick: Detect and fix jiffies update stall
clocksource/drivers/timer-of: Check return value of of_iomap in timer_of_base_init()
clocksource/drivers/timer-microchip-pit64b: Use 5MHz for clockevent
clocksource/drivers/timer-microchip-pit64b: Use notrace
clocksource/drivers/timer-microchip-pit64b: Remove mmio selection
dt-bindings: timer: Tegra: Convert text bindings to yaml
clocksource/drivers/imx-tpm: Move tpm_read_sched_clock() under CONFIG_ARM
clocksource/drivers/arm_arch_timer: Use event stream scaling when available
clocksource/drivers/exynos_mct: Increase the size of name array
clocksource/drivers/exynos_mct: Bump up mct max irq number
clocksource/drivers/exynos_mct: Remove mct interrupt index enum
clocksource/drivers/exynos_mct: Handle DTS with higher number of interrupts
clocksource/drivers/timer-ti-dm: Fix regression from errata i940 fix
clocksource/drivers/imx-tpm: Exclude sched clock for ARM64
clocksource: Add a Kconfig option for WATCHDOG_MAX_SKEW
clocksource/drivers/imx-tpm: Update name of clkevt
clocksource/drivers/imx-tpm: Add CLOCK_EVT_FEAT_DYNIRQ
...
|
|
https://git.linaro.org/people/daniel.lezcano/linux into timers/core
Pull clocksource/events updates from Daniel Lezcano:
- Fix return error code check for the timer-of layer when getting
the base address (Guillaume Ranquet)
- Remove MMIO dependency, add notrace annotation for sched_clock
and increase the timer resolution for the Microchip
PIT64b (Claudiu Beznea)
- Convert DT bindings to yaml for the Tegra timer (David Heidelberg)
- Fix compilation error on architecture other than ARM for the
i.MX TPM (Nathan Chancellor)
- Add support for the event stream scaling for 1GHz counter on
the arch ARM timer (Marc Zyngier)
- Support a higher number of interrupts by the Exynos MCT timer
driver (Alim Akhtar)
- Detect and prevent memory corruption when the specified number
of interrupts in the DTS is greater than the array size in the
code for the Exynos MCT timer (Krzysztof Kozlowski)
- Fix regression from a previous errata fix on the TI DM
timer (Drew Fustini)
- Several fixes and code improvements for the i.MX TPM
driver (Peng Fan)
Link: https://lore.kernel.org/all/a8cd9be9-7d70-80df-2b74-1a8226a215e1@linaro.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"Here is a third set of fixes for the soc tree, well within the
expected set of changes.
Maintainer list changes:
- Krzysztof Kozlowski and Jisheng Zhang both have new email addresses
- Broadcom iProc has a new git tree
Regressions:
- Robert Foss sends a revert for a Mediatek DPI bridge patch that
caused an inadvertent break in the DT binding
- mstar timers need to be included in Kconfig
Devicetree fixes for:
- Aspeed ast2600 spi pinmux
- Tegra eDP panels on Nyan FHD
- Tegra display IOMMU
- Qualcomm sm8350 UFS clocks
- minor DT changes for Marvell Armada, Qualcomm sdx65, Qualcomm
sm8450, and Broadcom BCM2711"
* tag 'soc-fixes-5.17-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
arm64: dts: marvell: armada-37xx: Remap IO space to bus address 0x0
MAINTAINERS: Update Jisheng's email address
Revert "arm64: dts: mt8183: jacuzzi: Fix bus properties in anx's DSI endpoint"
dt-bindings: drm/bridge: anx7625: Revert DPI support
ARM: dts: aspeed: Fix AST2600 quad spi group
MAINTAINERS: update Krzysztof Kozlowski's email
MAINTAINERS: Update git tree for Broadcom iProc SoCs
ARM: tegra: Move Nyan FHD panels to AUX bus
arm64: dts: armada-3720-turris-mox: Add missing ethernet0 alias
ARM: mstar: Select HAVE_ARM_ARCH_TIMER
soc: mediatek: mt8192-mmsys: Fix dither to dsi0 path's input sel
arm64: dts: mt8183: jacuzzi: Fix bus properties in anx's DSI endpoint
ARM: boot: dts: bcm2711: Fix HVS register range
arm64: dts: qcom: c630: disable crypto due to serror
arm64: dts: qcom: sm8450: fix apps_smmu interrupts
arm64: dts: qcom: sm8450: enable GCC_USB3_0_CLKREF_EN for usb
arm64: dts: qcom: sm8350: Correct UFS symbol clocks
arm64: tegra: Disable ISO SMMU for Tegra194
Revert "dt-bindings: arm: qcom: Document SDX65 platform and boards"
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt
Some fixes for rk8xx pmics to make them follow
the dt-binding better.
* tag 'v5.18-rockchip-dts32-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
ARM: dts: rockchip: Update regulator name for PX3
ARM: dts: rockchip: Add #clock-cells value for rk805
Link: https://lore.kernel.org/r/3788968.RB9BLzCXGK@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://github.com/Broadcom/stblinux into arm/dt
This pull request contains Broadcom ARM-based SoCs Device Tree changes
for 5.18, please pull the following:
- Arinc defines the switch ports of the RTL8365MB switch on the Asus
RT-AC88U
- Richard provides cache information for the BCM2835/36/37 and BCM2711
SoCs such that tools like "lscpu -C" can report it when supported
- Stefan adds support for the Raspberry Pi Zero 2 W (wireless)
- Matthew defines the MAC address NVMEM cells for the Cisco Meraki
MX64/MX65 devices, he also fixes the LED for these platforms.
- Rafal adds the MAC addres NVMEM cell for the Luxul XWR-3150
* tag 'arm-soc/for-5.18/devicetree' of https://github.com/Broadcom/stblinux:
ARM: dts: BCM5301X: Add Ethernet MAC address to Luxul XWR-3150
ARM: dts: NSP: MX6X: correct LED function types
ARM: dts: NSP: MX6X: get mac-address from eeprom
arm64: dts: broadcom: Add reference to RPi Zero 2 W
ARM: dts: Add Raspberry Pi Zero 2 W
dt-bindings: arm: bcm2835: Add Raspberry Pi Zero 2 W
ARM: dts: bcm2835/6: Add the missing L1/L2 cache information
ARM: dts: bcm2711: Add the missing L1/L2 cache information
ARM: dts: bcm2837: Add the missing L1/L2 cache information
ARM: dts: BCM5301X: define RTL8365MB switch on Asus RT-AC88U
Link: https://lore.kernel.org/r/20220307194817.3754107-2-f.fainelli@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/dt
AT91 DT #2 for 5.18:
- Align one sam9x60ek regulator with reality at vdd_1v15
- Clean sama7g5 i2c nodes
- Add EIC and NAND nodes to sama7g5
* tag 'at91-dt-5.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
ARM: dts: at91: sama7g5: Add NAND support
ARM: dts: at91: sama7g5: add eic node
ARM: dts: at91: sama7g5: Remove unused properties in i2c nodes
ARM: dts: at91: sam9x60ek: modify vdd_1v5 regulator to vdd_1v15
Link: https://lore.kernel.org/r/20220304160036.27392-1-nicolas.ferre@microchip.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Requesting quad mode for the FMC resulted in an error:
&fmc {
status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fwqspi_default>'
[ 0.742963] aspeed-g6-pinctrl 1e6e2000.syscon:pinctrl: invalid function FWQSPID in map table

This is because the quad mode pins are a group of pins, not a function.
After applying this patch we can request the pins and the QSPI data
lines are muxed:
# cat /sys/kernel/debug/pinctrl/1e6e2000.syscon\:pinctrl-aspeed-g6-pinctrl/pinmux-pins |grep 1e620000.spi
pin 196 (AE12): device 1e620000.spi function FWSPID group FWQSPID
pin 197 (AF12): device 1e620000.spi function FWSPID group FWQSPID
pin 240 (Y1): device 1e620000.spi function FWSPID group FWQSPID
pin 241 (Y2): device 1e620000.spi function FWSPID group FWQSPID
pin 242 (Y3): device 1e620000.spi function FWSPID group FWQSPID
pin 243 (Y4): device 1e620000.spi function FWSPID group FWQSPID
Fixes: f510f04c8c83 ("ARM: dts: aspeed: Add AST2600 pinmux nodes")
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Link: https://lore.kernel.org/r/20220304011010.974863-1-joel@jms.id.au
Link: https://lore.kernel.org/r/20220304011010.974863-1-joel@jms.id.au'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/fixes
ARM: tegra: Device tree fixes for v5.17
One more patch to fix up eDP panels on Nyan FHD models.
* tag 'tegra-for-5.17-arm-dt-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
ARM: tegra: Move Nyan FHD panels to AUX bus
ARM: tegra: Move panels to AUX bus
Link: https://lore.kernel.org/r/20220308084339.2199400-1-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Similarly to what was earlier done for other Nyan variants, move the eDP
panel on the FHD models to the AUX bus as well.
Suggested-by: Dmitry Osipenko <digetx@gmail.com>
Fixes: ef6fb9875ce0 ("ARM: tegra: Add device-tree for 1080p version of Nyan Big")
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
The existing fix for errata i940 causes a conflict for IPU2 which is
using timer 3 and 4. From arch/arm/boot/dts/dra7-ipu-dsp-common.dtsi:
&ipu2 {
mboxes = <&mailbox6 &mbox_ipu2_ipc3x>;
ti,timers = <&timer3>;
ti,watchdog-timers = <&timer4>, <&timer9>;
};
The conflict was noticed when booting mainline on the BeagleBoard X15
which has a TI AM5728 SoC:
remoteproc remoteproc1: 55020000.ipu is available
remoteproc remoteproc1: powering up 55020000.ipu
remoteproc remoteproc1: Booting fw image dra7-ipu2-fw.xem4
omap-rproc 55020000.ipu: could not get timer platform device
omap-rproc 55020000.ipu: omap_rproc_enable_timers failed: -19
remoteproc remoteproc1: can't start rproc 55020000.ipu: -19
This change modifies the errata fix to instead use timer 15 and 16 which
resolves the timer conflict.
It does not appear to introduce any latency regression. Results from
cyclictest with original errata fix using dmtimer 3 and 4:
# cyclictest --mlockall --smp --priority=80 --interval=200 --distance=0
policy: fifo: loadavg: 0.02 0.03 0.05
T: 0 ( 1449) P:80 I:200 C: 800368 Min: 0 Act: 32 Avg: 22 Max: 128
T: 1 ( 1450) P:80 I:200 C: 800301 Min: 0 Act: 12 Avg: 23 Max: 70
The results after the change to dmtimer 15 and 16:
# cyclictest --mlockall --smp --priority=80 --interval=200 --distance=0
policy: fifo: loadavg: 0.36 0.19 0.07
T: 0 ( 1711) P:80 I:200 C: 759599 Min: 0 Act: 6 Avg: 22 Max: 108
T: 1 ( 1712) P:80 I:200 C: 759539 Min: 0 Act: 19 Avg: 23 Max: 79
Fixes: 25de4ce5ed02 ("clocksource/drivers/timer-ti-dm: Handle dra7 timer wrap errata i940")
Link: https://lore.kernel.org/linux-omap/YfWsG0p6to3IJuvE@x1/
Suggested-by: Suman Anna <s-anna@ti.com>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Drew Fustini <dfustini@baylibre.com>
Link: https://lore.kernel.org/r/20220204053503.1409162-1-dfustini@baylibre.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
The regulator name of SWITCH_REG1 does not match any other board
with a rk818 PMIC, nor does it correspond to a regulator in the
rk808-regulator driver. Changing name to SWITCH_REG which is
consistent with other boards and is in the driver.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/20220303203958.4904-4-macroalpha82@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Based on a brief discussion on the mailing list it was determined that
clock-cells should be a required parameter in the event that a consumer
of the clock gets added in an overlay.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/20220303203958.4904-3-macroalpha82@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Add NAND support. The sama7g5's SMC IP is the same as sama5d2's with
a slightly change: it provides a synchronous clock output (SMC clock)
that is dedicated to FPGA usage. Since this doesn't interfere with the SMC
NAND configuration, thus code will not be added in the current nand driver
to address the FPGA usage, use the sama5d2's compatible and choose not to
introduce dedicated compatibles for sama7g5.
Tested with Micron MT29F4G08ABAEAWP NAND flash.
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
[nicolas.ferre@microchip.com: add the definition of PMC_MCK1 in
include/dt-bindings/clock/at91.h from another patch]
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20220111130556.905978-1-tudor.ambarus@microchip.com
|
|
Add EIC node.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20220228122326.1400954-2-claudiu.beznea@microchip.com
|
|
The "atmel,use-dma-rx", "atmel,use-dma-rx" dt properties are not used by
the i2c-at91 driver, nor they are defined in the bindings file, thus remove
them.
Cc: stable@vger.kernel.org
Fixes: 7540629e2fc7 ("ARM: dts: at91: add sama7g5 SoC DT and sama7g5-ek")
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Reviewed-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20220302161854.32177-1-tudor.ambarus@microchip.com
|
|
This regulator is powering the vddcore pins from MPU.
Its real value on the board and in the MPU datasheet is 1.15V.
Signed-off-by: Mihai Sain <mihai.sain@microchip.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20220302160235.28336-1-nicolas.ferre@microchip.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu into arm/dt
mvebu dt for 5.18 (part 1)
Add new 2 bays NAS:
- Ctera C200 V1 (kirkwood based)
- Ctera C200 V2 (armada-370 based)
Add support for PCIe legacy INTx interrupts on Armada 385
Add PCIe proprty to limit the power on miniPCIe slots in Turris Omnia
* tag 'mvebu-dt-5.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu:
ARM: dts: turris-omnia: Set PCIe slot-power-limit-milliwatt properties
ARM: dts: mvebu: Add Ctera C-200 V2 board
ARM: dts: kirkwood: Add Ctera C-200 V1 board
dt-bindings: vendor-prefixes: Add Ctera Networks
ARM: dts: armada-385.dtsi: Add definitions for PCIe legacy INTx interrupts
Link: https://lore.kernel.org/r/87pmn5zrd0.fsf@BL-laptop
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into arm/dt
- add initial support for mt6582 and Prestigio PMT5008 3G tablet
- add basic support for Airoha EN7523
* tag 'v5.17-next-dts32' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux:
ARM: dts: add GPIO support for Airoha EN7523
ARM: Add basic support for Airoha EN7523 SoC
dt-bindings: arm: airoha: Add binding for EN7523 SoC and EVB
dt-bindings: Add vendor prefix for Airoha
dt-bindings: mediatek: Adds a DT binding documentation for the MT6582 SoC
ARM: dts: Add initial support for Prestigio PMT5008 3G tablet
ARM: dts: Add initial support for Mediatek mt6582
Link: https://lore.kernel.org/r/3974dc7e-4185-4d88-ab5b-031a7d24214d@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
All 3 miniPCIe slots in Turris Omnia are designed for 10 W.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt
Qualcomm dts updates for v5.18
The MSM8226 platform gains description of USB, SoC power-domains,
PMIC multi-purpose pins, SPMI regulators, the smbb battery charger and
the LG G Watch R, on this platform, gains description of Bluetooth,
WiFI, fuel gauge, SMBB battery charger and USB.
DeviceTree validation issues in APQ8060, APQ8064, MDM9615, MSM8960,
IPQ4019 and SDX55 are corrected.
* tag 'qcom-dts-for-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (27 commits)
ARM: dts: qcom: msm8226: add power domains
ARM: dts: qcom: apq8026-lg-lenok: Add Bluetooth
ARM: dts: qcom: apq8026-lg-lenok: Add Wifi
ARM: dts: qcom: msm8226: Add pinctrl for sdhci nodes
ARM: dts: qcom: sdx55: Fix the address used for PCIe EP local addr space
ARM: dts: qcom: apq8060-dragonboard: fix typo in eMMC
ARM: dts: qcom: pm8226: Add node for the MPP
ARM: dts: qcom: fill missing power-domain-cells for gcc controllers
ARM: dts: qcom: msm8960: move vsdcc regulator out of simple-bus
ARM: dts: qcom: add KPSS GCC compatible to clock nodes
ARM: dts: qcom: fix gic_irq_domain_translate warnings for msm8960
ARM: dts: qcom: rename eth node to ethernet
ARM: dts: qcom: apq8060: correct mvs switch name
ARM: dts: qcom: nexus7: remove vcss supply which never existed
ARM: dts: qcom: apq8064: adjust dsi node name to match dt-schema
ARM: dts: qcom: apq8064: make pci regs property dt-schema compliant
ARM: dts: qcom: apq8064: correct ranges values
ARM: dts: qcom: ipq4019: fix sleep clock
ARM: dts: qcom: pm8226: Support SPMI regulators on PMIC sid 1
ARM: dts: qcom: pm8226: Add vibration motor node
...
Link: https://lore.kernel.org/r/20220301042828.1805481-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Airoha's GPIO controller on their ARM EN7523 SoCs consists of two banks of 32
GPIOs
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20220130145116.88406-14-nbd@nbd.name
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
|
|
EN7523 is an armv8 based silicon used inside broadband access type devices
such as xPON and xDSL. It shares various silicon blocks with MediaTek
silicon such as the MT7622.
Add basic support for Airoha EN7523, enough for booting to console.
The UART is basically 8250-compatible, except for the clock selection.
A clock-frequency value is synthesized to get this to run at 115200 bps.
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Bert Vermeulen <bert@biot.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20220130145116.88406-4-nbd@nbd.name
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
|
|
Luxul XWR-3150 stores MAC as NVRAM variable. Add NVMEM cell for it and
reference it in the Ethernet interface node.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
|
|
Ctera C200 V2 is armada-370 based 2-Bay NAS.
Hardware:
- SoC: Marvell 88F6707-A1 ARMv7 Processor 1,2GHz (ARMADA 370 SoC)
- Ram: 1GB (2x Nanya NT5CC512M8DN-D1)
- NAND Flash: 256MB (ESMT F59L2G81A-25T)
- Lan: 1x GBE (Marvell 88E1318-NNB2)
- Storage: 2x SATA HDD 3.5" Slot
- USB: 2x USB 3.0 port (Renesas uPD720202)
- Console: Internal J3 connector (1: Vcc, 2: Rx, 3: Tx, 4: GND)
- LEDs: 13x GPIO controlled
- Buttons: 2x GPIO controlled
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
|
|
Ctera C200 V1 is kirkwood-based 2-Bay NAS.
Hardware:
- SoC: Marvell 88F6281-A1 ARMv5TE Processor 1.2GHz
- Ram: 512MB (4x Nanya NT5TU128M8GE-AC)
- NAND Flash: 256MB (Samsung 216 K9F2G08U0C)
- Lan: 1x GBE (Marvell 88E1116R-NNC1)
- Storage: 2x SATA HDD 3.5" Slot
- USB: 2x USB 2.0 port
- Console: Internal J3 connector (1: Vcc, 2: Rx, 3: Tx, 4: GND)
- LEDs: 13x GPIO controlled
- Buttons: 2x GPIO controlled
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
|
|
With this change legacy INTA, INTB, INTC and INTD interrupts are reported
separately and not mixed into one Linux virq source anymore.
Signed-off-by: Pali Rohár <pali@kernel.org>
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Tested-by: Luis Mendes <luis.p.mendes@gmail.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/narmstrong/linux-oxnas into arm/dt
- Add Ethernet node for OX810SE base board
* tag 'oxnas-arm-soc-dt-for-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/narmstrong/linux-oxnas:
ARM: dts: ox810se: Add Ethernet support
Link: https://lore.kernel.org/r/530fd72c-e28a-4d5e-cb8d-8b3fbc1df89a@baylibre.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc into arm/dt
ASPEED device tree updates for 5.18
- New machines
* Quanta S6Q AST2600 BMC
* ASRock ROMED8HM3 AST2500 BMC, a half-width, single-socket Epyc
server board
- Facebook's Bletchley has a large update for production hardware
- Ampere's Mt Jade has a number of updates
- Small clenaups and additions for Everest, Rainier and Tacoma, and the
flash layout
* tag 'aspeed-5.18-devicetree-2' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc: (27 commits)
ARM: dts: aspeed: p10bmc: Enable ftrace in ramoops buffer
ARM: dts: aspeed: everest: Add RTC battery gpio name
ARM: dts: aspeed: rainer: Add RTC battery gpio name
ARM: dts: aspeed: Add ASRock ROMED8HM3 BMC
ARM: dts: aspeed: rainier: Remove SPI NOR controllers
ARM: dts: aspeed: mtjade: Move all adc sensors into iio-hwmon node
ARM: dts: aspeed: mtjade: Rename GPIO hog nodes to match schema.
ARM: dts: aspeed: mtjade: Update host0-ready pin
ARM: dts: aspeed: mtjade: Update rtc-battery-voltage-read-enable pin
ARM: dts: aspeed: mtjade: Enable secondary flash
ARM: dts: aspeed: tacoma: Remove CFAM reset GPIO
ARM: dts: aspeed: rainier: Label reset-cause-pinhole GPIO
ARM: dts: aspeed: everest: Label reset-cause-pinhole GPIO
ARM: dts: aspeed: tacoma: Clean up KCS nodes
ARM: dts: aspeed: Add device tree for Quanta S6Q BMC
ARM: dts: aspeed: bletchley: Cleanup redundant nodes
ARM: dts: aspeed: bletchley: Enable mdio3 bus
ARM: dts: aspeed: bletchley: Add INA230 sensor on each sled
ARM: dts: aspeed: bletchley: Add shunt-resistor for ADM1278
ARM: dts: aspeed: bletchley: Add interrupt support for sled io expander
...
Link: https://lore.kernel.org/r/CACPK8XdUXy5cnEDKmNirtByNMBGCjXwZpdKqJ0ytc0f34vzbBA@mail.gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dt
Samsung DTS ARM changes for v5.18, part two
Various cleanups after introducing DT schema: adding missing HDMI
supplies and aligning PPMU event node names with DT schema.
* tag 'samsung-dt-5.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: dts: exynos: align PPMU event node names with dtschema
ARM: dts: exynos: add missing HDMI supplies on SMDK5420
ARM: dts: exynos: add missing HDMI supplies on SMDK5250
Link: https://lore.kernel.org/r/20220226220116.13452-1-krzysztof.kozlowski@canonical.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/dt
ARM: tegra: Device tree changes for v5.18-rc1
The changes in this set are cleanups and fixes for 32-bit Tegra device
tree files. With these, some json-schema validation errors are fixed.
* tag 'tegra-for-5.18-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
ARM: tegra: tamonten: Fix I2C3 pad setting
ARM: tegra: Fix ethernet node names
ARM: tegra: paz00: Add MMC aliases
ARM: tegra: tf700t: Rename DSI node
ARM: tegra: transformer: Drop reg-shift for Tegra HS UART
ARM: tegra: asus-tf101: Enable S/PDIF and HDMI audio
ARM: tegra: Update jedec,lpddr2 revision-id binding
Link: https://lore.kernel.org/r/20220225164741.1064416-3-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Increase the size of the buffer and set the ftrace-size property in order
to collect event tracing during a crash.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Link: https://lore.kernel.org/r/20211202224525.29178-1-eajames@linux.ibm.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
This is the documented name used for OpenBMC systems:
https://github.com/openbmc/docs/blob/master/designs/device-tree-gpio-naming.md#rtc-battery-voltage-read-enable
Link: https://lore.kernel.org/r/20220222041559.68651-3-joel@jms.id.au
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
This is the documented name used for OpenBMC systems:
https://github.com/openbmc/docs/blob/master/designs/device-tree-gpio-naming.md#rtc-battery-voltage-read-enable
Link: https://lore.kernel.org/r/20220222041559.68651-2-joel@jms.id.au
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
This is a half-width, single-socket Epyc server board with an AST2500
BMC. This device tree is sufficient for basic OpenBMC functionality,
but we'll need to add a few more devices (as driver support becomes
available) before it's fully usable.
Signed-off-by: Zev Weiss <zev@bewilderbeest.net>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20220105101719.7093-1-zev@bewilderbeest.net
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Early Rainier builds had SPI NOR as a fallback boot device when eMMC
was not programmed. Most systems don't have the NOR populated, so remove
it from the device tree as it is not used.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20220120063307.63898-1-joel@jms.id.au
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Move adc14 and adc15 (battery sensor) into single iio-hwmon node to
correct label to be read by single application for all adc sensors.
Signed-off-by: Quan Nguyen <quan@os.amperecomputing.com>
Signed-off-by: Thang Q. Nguyen <thang@os.amperecomputing.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20220228000242.1884-6-quan@os.amperecomputing.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
GPIO hog nodes must have a "hog-" prefix or "-hog" suffix according to
the DT schema. Rename the node to pass dtbs_check.
Signed-off-by: Quan Nguyen <quan@os.amperecomputing.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20220228000242.1884-5-quan@os.amperecomputing.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Update the input GPIO that indicates Host ready.
Link: https://github.com/openbmc/docs/blob/master/designs/device-tree-gpio-naming.md#host-ready
Signed-off-by: Quan Nguyen <quan@os.amperecomputing.com>
Signed-off-by: Thang Q. Nguyen <thang@os.amperecomputing.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20220228000242.1884-4-quan@os.amperecomputing.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Update the output pin name that enables reading RTC battery voltage.
Link: https://github.com/openbmc/docs/blob/master/designs/device-tree-gpio-naming.md#rtc-battery-voltage-read-enable
Signed-off-by: Quan Nguyen <quan@os.amperecomputing.com>
Signed-off-by: Thang Q. Nguyen <thang@os.amperecomputing.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20220228000242.1884-3-quan@os.amperecomputing.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Enable the secondary flash of the Ampere's Mt. Jade's BMC.
Signed-off-by: Quan Nguyen <quan@os.amperecomputing.com>
Signed-off-by: Thang Q. Nguyen <thang@os.amperecomputing.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20220228000242.1884-2-quan@os.amperecomputing.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into arm/dt
STM32 DT for v5.18, round 1
Highlights:
----------
-MCU:
-Fix W=1 warnings for timers (duplicate unit-address) for F4 and F7 series.
-Enable DMA2D on f469 disco.
- MPU:
-General:
- Add new board support: emSBS-Argon.
- Add dma configuration for all U(S)ART nodes and disable them in board files
when they are not needed in stm32mp15.
- Correct GIC PPI interrupts on stm32mp15 and stm32mp13.
- ST boards:
- Add EXTI support on stm32mp13
- Add DMA, MDMA and DMAmux support to stm32mp13 (iso feature than MP15)
- Update SDMMC1/2 support on stm32mp13: sleep config, update version to v2.2,
update the max frequency to 130 MHz.
- DH boards:
- Enable rproc to control the CM4 and IPCC mailbox to interact with it.
* tag 'stm32-dt-for-v5.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: (43 commits)
ARM: dts: stm32: Correct masks for GIC PPI interrupts on stm32mp15
ARM: dts: stm32: Correct masks for GIC PPI interrupts on stm32mp13
ARM: dts: stm32: remove timer5 duplicate unit-address on stm32f7 series
ARM: dts: stm32: remove some timer duplicate unit-address on stm32f7 series
ARM: dts: stm32: Enable EXTI on stm32mp13
ARM: dts: stm32: keep uart nodes behavior on stm32mp15xx-dhcor-avenger96
ARM: dts: stm32: keep uart4 behavior on stm32mp15xx-dhcom-som
ARM: dts: stm32: keep uart nodes behavior on stm32mp15xx-dhcom-picoitx
ARM: dts: stm32: keep uart nodes behavior on stm32mp15xx-dhcom-pdk2
ARM: dts: stm32: keep uart nodes behavior on stm32mp15xx-dhcom-drc02
ARM: dts: stm32: keep uart4 behavior on stm32mp157c-odyssey
ARM: dts: stm32: keep uart4 behavior on stm32mp157c-lxa-mc1
ARM: dts: stm32: keep uart nodes behavior on stm32mp157a-stinger96
ARM: dts: stm32: keep uart nodes behavior on stm32mp1-microdev2.0
ARM: dts: stm32: keep uart nodes behavior on stm32mp1-microdev2.0-of7
ARM: dts: stm32: keep uart4 behavior on stm32mp157a-iot-box
ARM: dts: stm32: keep uart4 behavior on icore-stm32mp1-edimm2.2
ARM: dts: stm32: keep uart4 behavior on icore-stm32mp1-ctouch2
ARM: dts: stm32: keep uart4 and uart7 behavior on stm32mp15xx-dkx
ARM: dts: stm32: keep uart4 behavior on stm32mp157c-ed1
...
Link: https://lore.kernel.org/r/893924a9-bcc4-9fa9-4f8e-7f56e77f6854@foss.st.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/dt
AT91 & LAN966 DT #1 for 5.18:
- lan966x basic DT and associated evaluation board pcb8291 (2-ports)
- documentation for an upcoming Kontron switch board featuring a LAN9668
- one fix for an old bug we have with PMECC on sama5d2 in some corner
cases
- sama7g5 and its EK: crypto, CAN and DVFS operating points
* tag 'at91-dt-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
ARM: dts: at91: sama7g5: add opps
ARM: dts: at91: sama7g5ek: set regulator voltages for standby state
ARM: dts: at91: fix low limit for CPU regulator
ARM: dts: at91: sama7g5: Enable can0 and can1 support in sama7g5-ek
ARM: dts: at91: sama7g5: Add can controllers of sama7g5
ARM: dts: at91: sama7g5: Add crypto nodes
ARM: dts: at91: Use the generic "crypto" node name for the crypto IPs
ARM: dts: at91: remove status = "okay" from soc specific dtsi
ARM: dts: at91: sama5d2: Fix PMERRLOC resource size
dt-bindings: arm: at91: add Kontron's new KSwitches
ARM: dts: add DT for lan966 SoC and 2-port board pcb8291
Link: https://lore.kernel.org/r/20220225110735.18080-1-nicolas.ferre@microchip.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
