| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux
Pull module updates from Luis Chamberlain:
"The summary of the changes for this pull requests is:
- Song Liu's new struct module_memory replacement
- Nick Alcock's MODULE_LICENSE() removal for non-modules
- My cleanups and enhancements to reduce the areas where we vmalloc
module memory for duplicates, and the respective debug code which
proves the remaining vmalloc pressure comes from userspace.
Most of the changes have been in linux-next for quite some time except
the minor fixes I made to check if a module was already loaded prior
to allocating the final module memory with vmalloc and the respective
debug code it introduces to help clarify the issue. Although the
functional change is small it is rather safe as it can only *help*
reduce vmalloc space for duplicates and is confirmed to fix a bootup
issue with over 400 CPUs with KASAN enabled. I don't expect stable
kernels to pick up that fix as the cleanups would have also had to
have been picked up. Folks on larger CPU systems with modules will
want to just upgrade if vmalloc space has been an issue on bootup.
Given the size of this request, here's some more elaborate details:
The functional change change in this pull request is the very first
patch from Song Liu which replaces the 'struct module_layout' with a
new 'struct module_memory'. The old data structure tried to put
together all types of supported module memory types in one data
structure, the new one abstracts the differences in memory types in a
module to allow each one to provide their own set of details. This
paves the way in the future so we can deal with them in a cleaner way.
If you look at changes they also provide a nice cleanup of how we
handle these different memory areas in a module. This change has been
in linux-next since before the merge window opened for v6.3 so to
provide more than a full kernel cycle of testing. It's a good thing as
quite a bit of fixes have been found for it.
Jason Baron then made dynamic debug a first class citizen module user
by using module notifier callbacks to allocate / remove module
specific dynamic debug information.
Nick Alcock has done quite a bit of work cross-tree to remove module
license tags from things which cannot possibly be module at my request
so to:
a) help him with his longer term tooling goals which require a
deterministic evaluation if a piece a symbol code could ever be
part of a module or not. But quite recently it is has been made
clear that tooling is not the only one that would benefit.
Disambiguating symbols also helps efforts such as live patching,
kprobes and BPF, but for other reasons and R&D on this area is
active with no clear solution in sight.
b) help us inch closer to the now generally accepted long term goal
of automating all the MODULE_LICENSE() tags from SPDX license tags
In so far as a) is concerned, although module license tags are a no-op
for non-modules, tools which would want create a mapping of possible
modules can only rely on the module license tag after the commit
8b41fc4454e ("kbuild: create modules.builtin without
Makefile.modbuiltin or tristate.conf").
Nick has been working on this *for years* and AFAICT I was the only
one to suggest two alternatives to this approach for tooling. The
complexity in one of my suggested approaches lies in that we'd need a
possible-obj-m and a could-be-module which would check if the object
being built is part of any kconfig build which could ever lead to it
being part of a module, and if so define a new define
-DPOSSIBLE_MODULE [0].
A more obvious yet theoretical approach I've suggested would be to
have a tristate in kconfig imply the same new -DPOSSIBLE_MODULE as
well but that means getting kconfig symbol names mapping to modules
always, and I don't think that's the case today. I am not aware of
Nick or anyone exploring either of these options. Quite recently Josh
Poimboeuf has pointed out that live patching, kprobes and BPF would
benefit from resolving some part of the disambiguation as well but for
other reasons. The function granularity KASLR (fgkaslr) patches were
mentioned but Joe Lawrence has clarified this effort has been dropped
with no clear solution in sight [1].
In the meantime removing module license tags from code which could
never be modules is welcomed for both objectives mentioned above. Some
developers have also welcomed these changes as it has helped clarify
when a module was never possible and they forgot to clean this up, and
so you'll see quite a bit of Nick's patches in other pull requests for
this merge window. I just picked up the stragglers after rc3. LWN has
good coverage on the motivation behind this work [2] and the typical
cross-tree issues he ran into along the way. The only concrete blocker
issue he ran into was that we should not remove the MODULE_LICENSE()
tags from files which have no SPDX tags yet, even if they can never be
modules. Nick ended up giving up on his efforts due to having to do
this vetting and backlash he ran into from folks who really did *not
understand* the core of the issue nor were providing any alternative /
guidance. I've gone through his changes and dropped the patches which
dropped the module license tags where an SPDX license tag was missing,
it only consisted of 11 drivers. To see if a pull request deals with a
file which lacks SPDX tags you can just use:
./scripts/spdxcheck.py -f \
$(git diff --name-only commid-id | xargs echo)
You'll see a core module file in this pull request for the above, but
that's not related to his changes. WE just need to add the SPDX
license tag for the kernel/module/kmod.c file in the future but it
demonstrates the effectiveness of the script.
Most of Nick's changes were spread out through different trees, and I
just picked up the slack after rc3 for the last kernel was out. Those
changes have been in linux-next for over two weeks.
The cleanups, debug code I added and final fix I added for modules
were motivated by David Hildenbrand's report of boot failing on a
systems with over 400 CPUs when KASAN was enabled due to running out
of virtual memory space. Although the functional change only consists
of 3 lines in the patch "module: avoid allocation if module is already
present and ready", proving that this was the best we can do on the
modules side took quite a bit of effort and new debug code.
The initial cleanups I did on the modules side of things has been in
linux-next since around rc3 of the last kernel, the actual final fix
for and debug code however have only been in linux-next for about a
week or so but I think it is worth getting that code in for this merge
window as it does help fix / prove / evaluate the issues reported with
larger number of CPUs. Userspace is not yet fixed as it is taking a
bit of time for folks to understand the crux of the issue and find a
proper resolution. Worst come to worst, I have a kludge-of-concept [3]
of how to make kernel_read*() calls for modules unique / converge
them, but I'm currently inclined to just see if userspace can fix this
instead"
Link: https://lore.kernel.org/all/Y/kXDqW+7d71C4wz@bombadil.infradead.org/ [0]
Link: https://lkml.kernel.org/r/025f2151-ce7c-5630-9b90-98742c97ac65@redhat.com [1]
Link: https://lwn.net/Articles/927569/ [2]
Link: https://lkml.kernel.org/r/20230414052840.1994456-3-mcgrof@kernel.org [3]
* tag 'modules-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux: (121 commits)
module: add debugging auto-load duplicate module support
module: stats: fix invalid_mod_bytes typo
module: remove use of uninitialized variable len
module: fix building stats for 32-bit targets
module: stats: include uapi/linux/module.h
module: avoid allocation if module is already present and ready
module: add debug stats to help identify memory pressure
module: extract patient module check into helper
modules/kmod: replace implementation with a semaphore
Change DEFINE_SEMAPHORE() to take a number argument
module: fix kmemleak annotations for non init ELF sections
module: Ignore L0 and rename is_arm_mapping_symbol()
module: Move is_arm_mapping_symbol() to module_symbol.h
module: Sync code of is_arm_mapping_symbol()
scripts/gdb: use mem instead of core_layout to get the module address
interconnect: remove module-related code
interconnect: remove MODULE_LICENSE in non-modules
zswap: remove MODULE_LICENSE in non-modules
zpool: remove MODULE_LICENSE in non-modules
x86/mm/dump_pagetables: remove MODULE_LICENSE in non-modules
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt updates from Greg KH:
"Here is the large set of USB and Thunderbolt changes for 6.4-rc1.
The "biggest" thing in here is the removal of two obsolete drivers,
u132-hcd and ftdi-elan, making this a net-removal of code overall.
Other than the driver removals, included in here are:
- Thunderbolt updates for new hardware and features
- xhci driver updates and fixes
- dwc3 driver updates and fixes
- gadget core and driver updates and features added
- mtu3 driver updates
- dwc2 driver fixes and updates
- usb-serial driver updates
- typec driver updates and fixes
- platform remove callback changes
- dts updates and conversions
- other small changes
All have been in linux-next for a while with no reported problems"
* tag 'usb-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (177 commits)
usb: dwc3: gadget: Refactor EP0 forced stall/restart into a separate API
usb: dwc3: gadget: Execute gadget stop after halting the controller
media: radio-shark: Add endpoint checks
USB: sisusbvga: Add endpoint checks
USB: core: Add routines for endpoint checks in old drivers
usb: dwc3: gadget: Stall and restart EP0 if host is unresponsive
dt-bindings: usb: snps,dwc3: Add 'snps,parkmode-disable-hs-quirk' quirk
usb: dwc3: core: add support for disabling High-speed park mode
dt-bindings: usb: ci-hdrc-usb2: allow multiple PHYs
usb: mtu3: add optional clock xhci_ck and frmcnt_ck
dt-bindings: usb: mtu3: add two optional clocks
usb: mtu3: expose role-switch control to userspace
usb: mtu3: unlock @mtu->lock just before giving back request
usb: mtu3: fix kernel panic at qmu transfer done irq handler
usb: mtu3: use boolean return value
usb: mtu3: give back request when rx error happens
usb: chipidea: fix missing goto in `ci_hdrc_probe`
usb: gadget: udc: core: Prevent redundant calls to pullup
usb: gadget: udc: core: Invoke usb_gadget_connect only when started
usb: typec: ucsi: don't print PPM init deferred errors
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni:
"Core:
- Introduce a config option to tweak MAX_SKB_FRAGS. Increasing the
default value allows for better BIG TCP performances
- Reduce compound page head access for zero-copy data transfers
- RPS/RFS improvements, avoiding unneeded NET_RX_SOFTIRQ when
possible
- Threaded NAPI improvements, adding defer skb free support and
unneeded softirq avoidance
- Address dst_entry reference count scalability issues, via false
sharing avoidance and optimize refcount tracking
- Add lockless accesses annotation to sk_err[_soft]
- Optimize again the skb struct layout
- Extends the skb drop reasons to make it usable by multiple
subsystems
- Better const qualifier awareness for socket casts
BPF:
- Add skb and XDP typed dynptrs which allow BPF programs for more
ergonomic and less brittle iteration through data and
variable-sized accesses
- Add a new BPF netfilter program type and minimal support to hook
BPF programs to netfilter hooks such as prerouting or forward
- Add more precise memory usage reporting for all BPF map types
- Adds support for using {FOU,GUE} encap with an ipip device
operating in collect_md mode and add a set of BPF kfuncs for
controlling encap params
- Allow BPF programs to detect at load time whether a particular
kfunc exists or not, and also add support for this in light
skeleton
- Bigger batch of BPF verifier improvements to prepare for upcoming
BPF open-coded iterators allowing for less restrictive looping
capabilities
- Rework RCU enforcement in the verifier, add kptr_rcu and enforce
BPF programs to NULL-check before passing such pointers into kfunc
- Add support for kptrs in percpu hashmaps, percpu LRU hashmaps and
in local storage maps
- Enable RCU semantics for task BPF kptrs and allow referenced kptr
tasks to be stored in BPF maps
- Add support for refcounted local kptrs to the verifier for allowing
shared ownership, useful for adding a node to both the BPF list and
rbtree
- Add BPF verifier support for ST instructions in
convert_ctx_access() which will help new -mcpu=v4 clang flag to
start emitting them
- Add ARM32 USDT support to libbpf
- Improve bpftool's visual program dump which produces the control
flow graph in a DOT format by adding C source inline annotations
Protocols:
- IPv4: Allow adding to IPv4 address a 'protocol' tag. Such value
indicates the provenance of the IP address
- IPv6: optimize route lookup, dropping unneeded R/W lock acquisition
- Add the handshake upcall mechanism, allowing the user-space to
implement generic TLS handshake on kernel's behalf
- Bridge: support per-{Port, VLAN} neighbor suppression, increasing
resilience to nodes failures
- SCTP: add support for Fair Capacity and Weighted Fair Queueing
schedulers
- MPTCP: delay first subflow allocation up to its first usage. This
will allow for later better LSM interaction
- xfrm: Remove inner/outer modes from input/output path. These are
not needed anymore
- WiFi:
- reduced neighbor report (RNR) handling for AP mode
- HW timestamping support
- support for randomized auth/deauth TA for PASN privacy
- per-link debugfs for multi-link
- TC offload support for mac80211 drivers
- mac80211 mesh fast-xmit and fast-rx support
- enable Wi-Fi 7 (EHT) mesh support
Netfilter:
- Add nf_tables 'brouting' support, to force a packet to be routed
instead of being bridged
- Update bridge netfilter and ovs conntrack helpers to handle IPv6
Jumbo packets properly, i.e. fetch the packet length from
hop-by-hop extension header. This is needed for BIT TCP support
- The iptables 32bit compat interface isn't compiled in by default
anymore
- Move ip(6)tables builtin icmp matches to the udptcp one. This has
the advantage that icmp/icmpv6 match doesn't load the
iptables/ip6tables modules anymore when iptables-nft is used
- Extended netlink error report for netdevice in flowtables and
netdev/chains. Allow for incrementally add/delete devices to netdev
basechain. Allow to create netdev chain without device
Driver API:
- Remove redundant Device Control Error Reporting Enable, as PCI core
has already error reporting enabled at enumeration time
- Move Multicast DB netlink handlers to core, allowing devices other
then bridge to use them
- Allow the page_pool to directly recycle the pages from safely
localized NAPI
- Implement lockless TX queue stop/wake combo macros, allowing for
further code de-duplication and sanitization
- Add YNL support for user headers and struct attrs
- Add partial YNL specification for devlink
- Add partial YNL specification for ethtool
- Add tc-mqprio and tc-taprio support for preemptible traffic classes
- Add tx push buf len param to ethtool, specifies the maximum number
of bytes of a transmitted packet a driver can push directly to the
underlying device
- Add basic LED support for switch/phy
- Add NAPI documentation, stop relaying on external links
- Convert dsa_master_ioctl() to netdev notifier. This is a
preparatory work to make the hardware timestamping layer selectable
by user space
- Add transceiver support and improve the error messages for CAN-FD
controllers
New hardware / drivers:
- Ethernet:
- AMD/Pensando core device support
- MediaTek MT7981 SoC
- MediaTek MT7988 SoC
- Broadcom BCM53134 embedded switch
- Texas Instruments CPSW9G ethernet switch
- Qualcomm EMAC3 DWMAC ethernet
- StarFive JH7110 SoC
- NXP CBTX ethernet PHY
- WiFi:
- Apple M1 Pro/Max devices
- RealTek rtl8710bu/rtl8188gu
- RealTek rtl8822bs, rtl8822cs and rtl8821cs SDIO chipset
- Bluetooth:
- Realtek RTL8821CS, RTL8851B, RTL8852BS
- Mediatek MT7663, MT7922
- NXP w8997
- Actions Semi ATS2851
- QTI WCN6855
- Marvell 88W8997
- Can:
- STMicroelectronics bxcan stm32f429
Drivers:
- Ethernet NICs:
- Intel (1G, icg):
- add tracking and reporting of QBV config errors
- add support for configuring max SDU for each Tx queue
- Intel (100G, ice):
- refactor mailbox overflow detection to support Scalable IOV
- GNSS interface optimization
- Intel (i40e):
- support XDP multi-buffer
- nVidia/Mellanox:
- add the support for linux bridge multicast offload
- enable TC offload for egress and engress MACVLAN over bond
- add support for VxLAN GBP encap/decap flows offload
- extend packet offload to fully support libreswan
- support tunnel mode in mlx5 IPsec packet offload
- extend XDP multi-buffer support
- support MACsec VLAN offload
- add support for dynamic msix vectors allocation
- drop RX page_cache and fully use page_pool
- implement thermal zone to report NIC temperature
- Netronome/Corigine:
- add support for multi-zone conntrack offload
- Solarflare/Xilinx:
- support offloading TC VLAN push/pop actions to the MAE
- support TC decap rules
- support unicast PTP
- Other NICs:
- Broadcom (bnxt): enforce software based freq adjustments only on
shared PHC NIC
- RealTek (r8169): refactor to addess ASPM issues during NAPI poll
- Micrel (lan8841): add support for PTP_PF_PEROUT
- Cadence (macb): enable PTP unicast
- Engleder (tsnep): add XDP socket zero-copy support
- virtio-net: implement exact header length guest feature
- veth: add page_pool support for page recycling
- vxlan: add MDB data path support
- gve: add XDP support for GQI-QPL format
- geneve: accept every ethertype
- macvlan: allow some packets to bypass broadcast queue
- mana: add support for jumbo frame
- Ethernet high-speed switches:
- Microchip (sparx5): Add support for TC flower templates
- Ethernet embedded switches:
- Broadcom (b54):
- configure 6318 and 63268 RGMII ports
- Marvell (mv88e6xxx):
- faster C45 bus scan
- Microchip:
- lan966x:
- add support for IS1 VCAP
- better TX/RX from/to CPU performances
- ksz9477: add ETS Qdisc support
- ksz8: enhance static MAC table operations and error handling
- sama7g5: add PTP capability
- NXP (ocelot):
- add support for external ports
- add support for preemptible traffic classes
- Texas Instruments:
- add CPSWxG SGMII support for J7200 and J721E
- Intel WiFi (iwlwifi):
- preparation for Wi-Fi 7 EHT and multi-link support
- EHT (Wi-Fi 7) sniffer support
- hardware timestamping support for some devices/firwmares
- TX beacon protection on newer hardware
- Qualcomm 802.11ax WiFi (ath11k):
- MU-MIMO parameters support
- ack signal support for management packets
- RealTek WiFi (rtw88):
- SDIO bus support
- better support for some SDIO devices (e.g. MAC address from
efuse)
- RealTek WiFi (rtw89):
- HW scan support for 8852b
- better support for 6 GHz scanning
- support for various newer firmware APIs
- framework firmware backwards compatibility
- MediaTek WiFi (mt76):
- P2P support
- mesh A-MSDU support
- EHT (Wi-Fi 7) support
- coredump support"
* tag 'net-next-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2078 commits)
net: phy: hide the PHYLIB_LEDS knob
net: phy: marvell-88x2222: remove unnecessary (void*) conversions
tcp/udp: Fix memleaks of sk and zerocopy skbs with TX timestamp.
net: amd: Fix link leak when verifying config failed
net: phy: marvell: Fix inconsistent indenting in led_blink_set
lan966x: Don't use xdp_frame when action is XDP_TX
tsnep: Add XDP socket zero-copy TX support
tsnep: Add XDP socket zero-copy RX support
tsnep: Move skb receive action to separate function
tsnep: Add functions for queue enable/disable
tsnep: Rework TX/RX queue initialization
tsnep: Replace modulo operation with mask
net: phy: dp83867: Add led_brightness_set support
net: phy: Fix reading LED reg property
drivers: nfc: nfcsim: remove return value check of `dev_dir`
net: phy: dp83867: Remove unnecessary (void*) conversions
net: ethtool: coalesce: try to make user settings stick twice
net: mana: Check if netdev/napi_alloc_frag returns single page
net: mana: Rename mana_refill_rxoob and remove some empty lines
net: veth: add page_pool stats
...
|
|
Pull ARM SoC devicetree updates from Arnd Bergmann:
"The devicetree changes overall are again dominated by the Qualcomm
Snapdragon platform that weighs in at over 300 changesets, but there
are many updates across other platforms as well, notably Mediatek,
NXP, Rockchips, Renesas, TI, Samsung and ST Microelectronics. These
all add new features for existing machines, as well as new machines
and SoCs.
The newly added SoCs are:
- Allwinner T113-s, an Cortex-A7 based variant of the RISC-V based D1
chip.
- StarFive JH7110, a RISC-V SoC based on the Sifive U74 core like its
JH7100 predecessor, but with additional CPU cores and a GPU.
- Apple M2 as used in current Macbook Air/Pro and Mac Mini gets
added, with comparable support as its M1 predecessor.
- Unisoc UMS512 (Tiger T610) is a midrange smartphone SoC
- Qualcomm IPQ5332 and IPQ9574 are Wi-Fi 7 networking SoCs, based on
the Cortex-A53 and Cortex-A73 cores, respectively.
- Qualcomm sa8775p is an automotive SoC derived from the Snapdragon
family.
Including the initial board support for the added SoC platforms, there
are 52 new machines. The largest group are 19 boards industrial
embedded boards based on the NXP i.MX6 (32-bit) and i.MX8 (64-bit)
families.
Others include:
- Two boards based on the Allwinner f1c200s ultra-low-cost chip
- Three 'Banana Pi' variants based on the Amlogic g12b (A311D, S922X)
SoC.
- The Gl.Inet mv1000 router based on Marvell Armada 3720
- A Wifi/LTE Dongle based on Qualcomm msm8916
- Two robotics boards based on Qualcomm QRB chips
- Three Snapdragon based phones made by Xiaomi
- Five developments boards based on various Rockchip SoCs, including
the rk3588s-khadas-edge2 and a few NanoPi models
- The AM625 Beagleplay industrial SBC
Another 14 machines get removed: both boards for the obsolete 'oxnas'
platform, three boards for the Renesas r8a77950 SoC that were only for
pre-production chips, and various chromebook models based on the
Qualcomm Sc7180 'trogdor' design that were never part of products"
* tag 'soc-dt-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (836 commits)
arm64: dts: rockchip: Add support for volume keys to rk3399-pinephone-pro
arm64: dts: rockchip: Add vdd_cpu_big regulators to rk3588-rock-5b
arm64: dts: rockchip: Use generic name for es8316 on Pinebook Pro and Rock 5B
arm64: dts: rockchip: Drop RTC clock-frequency on rk3588-rock-5b
arm64: dts: apple: t8112: Add PWM controller
arm64: dts: apple: t600x: Add PWM controller
arm64: dts: apple: t8103: Add PWM controller
arm64: dts: rockchip: Add pinctrl gpio-ranges for rk356x
ARM: dts: nomadik: Replace deprecated spi-gpio properties
ARM: dts: aspeed-g6: Add UDMA node
ARM: dts: aspeed: greatlakes: add mctp device
ARM: dts: aspeed: greatlakes: Add gpio names
ARM: dts: aspeed: p10bmc: Change power supply info
arm64: dts: mediatek: mt6795-xperia-m5: Add Bosch BMM050 Magnetometer
arm64: dts: mediatek: mt6795-xperia-m5: Add Bosch BMA255 Accelerometer
arm64: dts: mediatek: mt6795: Add tertiary PWM node
arm64: dts: rockchip: add panel to Anbernic RG353 series
dt-bindings: arm: Add Data Modul i.MX8M Plus eDM SBC
dt-bindings: arm: fsl: Add chargebyte Tarragon
dt-bindings: vendor-prefixes: add chargebyte
...
|
|
Pull ARM development updates from Russell King:
"Four changes for v6.4:
- simplify the path to the top vmlinux
- three patches to fix vfp with instrumentation enabled (eg lockdep)"
* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
ARM: 9294/2: vfp: Fix broken softirq handling with instrumentation enabled
ARM: 9293/1: vfp: Pass successful return address via register R3
ARM: 9292/1: vfp: Pass thread_info pointer to vfp_support_entry
ARM: 9291/1: decompressor: simplify the path to the top vmlinux
|
|
Adjacent changes:
net/mptcp/protocol.h
63740448a32e ("mptcp: fix accept vs worker race")
2a6a870e44dd ("mptcp: stops worker on unaccepted sockets at listener close")
ddb1a072f858 ("mptcp: move first subflow allocation at mpc access time")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
It's needed on STM32MP15, when using the integrated full-speed PHY. This
clock is an output of USBPHYC, and the HS USBPHYC is not attached as PHY
in this case (managed directly by dwc2 ggpio glue):
&usbotg_hs {
compatible = "st,stm32mp15-fsotg", "snps,dwc2";
pinctrl-names = "default";
pinctrl-0 = <&usbotg_hs_pins_a &usbotg_fs_dp_dm_pins_a>;
vbus-supply = <&vbus_otg>;
status = "okay";
};
USBPHYC clock output must be used, so it can be properly enabled as a
clock provider.
Without this, currently, when the dualport High-Speed USBPHYC isn't
requested by either USBH or OTG, it remains uninitialized when probing
OTG: OTG configured with full-speed PHY isn't properly clocked, resulting
in error log like:
[ 2.383138] dwc2 49000000.usb-otg: dwc2_core_reset: HANG! Soft Reset
timeout GRSTCTL_CSFTRST.
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Link: https://lore.kernel.org/r/20230414084137.1050487-5-fabrice.gasnier@foss.st.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The WAN port of the 370-RD has a Marvell PHY, with one LED on
the front panel.y List this LED in the device tree.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add Switch LED for each port for MikroTik RB3011UiAS-RM.
MikroTik RB3011UiAS-RM is a 10 port device with 2 qca8337 switch chips
connected.
It was discovered that in the hardware design all 3 Switch LED trace of
the related port is connected to the same LED. This was discovered by
setting to 'always on' the related led in the switch regs and noticing
that all 3 LED for the specific port (for example for port 1) cause the
connected LED for port 1 to turn on. As an extra test we tried enabling
2 different LED for the port resulting in the LED turned off only if
every led in the reg was off.
Aside from this funny and strange hardware implementation, the device
itself have one green LED for each port, resulting in 10 green LED one
for each of the 10 supported port.
Cc: Jonathan McDowell <noodles@earth.li>
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
IPQ8064 MikroTik RB3011UiAS-RM DT have currently unevaluted properties
in the 2 switch nodes. The bindings #address-cells and #size-cells are
redundant and cause warning for 'Unevaluated properties are not
allowed'.
Drop these bindings to mute these warning as they should not be there
from the start.
Cc: Jonathan McDowell <noodles@earth.li>
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Jonathan McDowell <noodles@earth.li>
Tested-by: Jonathan McDowell <noodles@earth.li>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu into soc/dt
mvebu dt for 6.4 (part 1)
Add missing phy-mode and fixed links for kirkwood, orion5 and Armada
(370, XP, 38x) SoCs
* tag 'mvebu-dt-6.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu:
ARM: dts: armada: Add missing phy-mode and fixed links
ARM: dts: orion5: Add missing phy-mode and fixed links
ARM: dts: kirkwood: Add missing phy-mode and fixed links
Link: https://lore.kernel.org/r/87edohzfeg.fsf@BL-laptop
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into soc/dt
mt7623:
Disable not exising home key
mt2701:
change node name to match DT bindings
* tag 'v6.3-next-dts32' of https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux:
arm: dts: mt7623: disable home key on Bananapi BPI-R2
arm: dts: mediatek: Fix existing NAND controller node name
Link: https://lore.kernel.org/r/c3b17357-e08d-da7e-def0-a7f9e0b95cb7@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt
A few more Qualcomm ARM32 DeviceTree updates for v6.4
This adds IPA definition to the sdx65 platform, and brings a few
stylistic changes to sdx55 and sdx65.
Compatibles for the two new Qualcomm Robotics Platform boards, RB1 and
RB2, are defined, as is Xiaomi Mi A3 and the MI01.6 development baord on
IPQ5332. These are all ARM64 boards, despite being introduced through
the ARM32 pull request...
* tag 'qcom-dts-for-6.4-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
dt-bindings: arm: qcom: Document the Qualcomm qrb4210-rb2 board
ARM: dts: qcom: sdx55-fn980: Move "status" property to the end of node
ARM: dts: qcom: sdx55: Move reset and wake gpios to board dts
dt-bindings: arm: qcom: document MI01.6 board based on IPQ5332 family
dt-bindings: arm: qcom: Document xiaomi,laurel-sprout board
dt-bindings: arm: qcom: Add QRB2210/QCM2290 and RB1 board
ARM: dts: qcom: sdx65: move status properties to end of nodes
ARM: dts: qcom: sdx65: add IPA information
Link: https://lore.kernel.org/r/20230414023723.2411793-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc into soc/dt
ASPEED device tree updates for 6.4
- Fixes for romed8hm3 GPIO, asrock SPI clocks, bonnell eeprom
- Misc updates for various BMC systems
- Add AST2600 UDMA node
* tag 'aspeed-6.4-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc:
ARM: dts: aspeed-g6: Add UDMA node
ARM: dts: aspeed: greatlakes: add mctp device
ARM: dts: aspeed: greatlakes: Add gpio names
ARM: dts: aspeed: p10bmc: Change power supply info
ARM: dts: aspeed: bonnell: Update eeprom size
ARM: dts: aspeed: bonnell: Remove MAC3
ARM: dts: aspeed: everest: Add reserved memory for TPM event log
ARM: dts: aspeed: mtmitchell: Enable NCSI
ARM: dts: aspeed: asrock: Correct firmware flash SPI clocks
ARM: dts: aspeed: e3c246d4i: Add PECI device
ARM: dts: aspeed: romed8hm3: Fix GPIO polarity of system-fault LED
Link: https://lore.kernel.org/r/CACPK8XfmK5S=1PQjBQHb6daDR3qTWN-_NLoXP7+ZDCk13wDxcA@mail.gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://github.com/Broadcom/stblinux into soc/dt
This pull request contains Broadcom ARM-based SoCs Device Tree changes
for 6.4, please pull the following:
- William adds the new-style High Speed SPI controller node to the BCA
SoCs
* tag 'arm-soc/for-6.4/devicetree' of https://github.com/Broadcom/stblinux:
ARM: dts: broadcom: bcmbca: Add spi controller node
Link: https://lore.kernel.org/r/20230410232606.1917803-1-f.fainelli@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
As stated in Documentation/devicetree/bindings/spi/spi-gpio.yaml,
'gpio-mosi' and 'gpio-sck' are deprecated properties.
Use the recommeded 'mosi-gpios' and 'sck-gpios' instead.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Link: https://lore.kernel.org/r/20230407162504.1683422-1-festevam@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230410220300.2431524-1-linus.walleij@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt
Qualcomm ARM32 DeviceTree updates for v6.4
stdout-path is defined for the ALFA Network AP120C-AC, to avoid the need
to pass this information on the kernel commandline. Ath10k is wired up
to read calibration data from the "ART" partition.
PCI I/O port ranges are fixed on IPQ4019 and IPQ8064.
Supply clocks are defined for KPSS L2CC and ACC clock controllers.
Supply clocks for the global clock controller are being specified on
IPQ4019, MSM8974 and MSM8226.
PCIe RC support is enabled on the SDX55 T55 development board, IPA is
defined for the SDX55 and a number of cleanup patches are introduced.
Compatibles for QRB2210/QCM2290, IPQ9574, QRD8550 and IPQ5332 platforms
are added, and the RB1, Yiming LTE dongle, Xiaomi Mi A3, MI01.2 and
MI01.6 boards.
* tag 'qcom-dts-for-6.4' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (28 commits)
dt-bindings: arm: qcom: Add Yiming LTE dongle uz801-v3.0 (yiming-uz801v3)
dt-bindings: vendor-prefixes: Add Henan Yiming Technology Co., Ltd.
ARM: dts: qcom: sdx55: add dedicated SDX55 TCSR compatible
ARM: dts: qcom: sdx55-t55: Move "status" property down
ARM: dts: qcom: sdx55-t55: Enable PCIe RC support
ARM: dts: qcom: sdx55: List the property values vertically
ARM: dts: qcom: sdx55: Add support for PCIe RC controller
ARM: dts: qcom: sdx55: Rename pcie0_{phy/lane} to pcie_{phy/lane}
ARM: dts: qcom: sdx55: Fix the unit address of PCIe EP node
ARM: dts: qcom: ipq8064: Fix the PCI I/O port range
ARM: dts: qcom: ipq4019: Fix the PCI I/O port range
ARM: dts: qcom: apq8064: Use 0x prefix for the PCI I/O and MEM ranges
dt-bindings: arm: qcom: Add ipq9574 compatible
ARM: dts: qcom: msm8974: add correct XO clock source to GCC node
ARM: dts: qcom: msm8226: add clocks and clock-names to GCC node
ARM: dts: qcom: rename kpss-acc-v2 nodes to power-manager nodes
ARM: dts: qcom: add missing clock configuration for kpss-acc-v1
ARM: dts: qcom: add and fix clock configuration for kpss-gcc nodes
ARM: dts: qcom: add per SoC compatible for qcom,kpss-gcc nodes
dt-bindings: qcom: add ipq5332 boards
...
Link: https://lore.kernel.org/r/20230410155226.5127-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt
Renesas DTS updates for v6.4 (take two)
- Add PWM support for the R-Car H1 and H2 SoCs,
- Add slide switch and I2C support for the Marzen development board,
- Add SCI (serial) and Camera support for the RZ/G2L SoC and the
RZ/G2L SMARC EVK development board,
- Add IOMMU support for the R-Car V4H SoC,
- Miscellaneous fixes and improvements.
* tag 'renesas-dts-for-v6.4-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
arm64: dts: renesas: r8a779a0: Revise renesas,ipmmu-main
arm64: dts: renesas: falcon-csi-dsi: Set bus-type for MAX96712
arm64: dts: renesas: r8a779g0: Add iommus to MMC node
arm64: dts: renesas: r8a779g0: Add iommus to DMAC nodes
arm64: dts: renesas: r8a779g0: Add IPMMU nodes
arm64: dts: renesas: r8a779f0: Revise renesas,ipmmu-main
arm64: dts: renesas: rzg2l-smarc: Enable CRU, CSI support
arm64: dts: renesas: r9a07g044: Add CSI and CRU nodes
arm64: dts: renesas: r9a07g044: Enable SCI0 using DT overlay
ARM: dts: r8a7790: Add PWM device nodes
ARM: dts: r8a7790: Add TPU device node
ARM: dts: marzen: Enable I2C support
ARM: dts: marzen: Add slide switches
ARM: dts: r8a7779: Add PWM support
dt-bindings: clock: r8a7779: Add PWM module clock
arm64: dts: renesas: rzg2l: Add clock-names and reset-names to DMAC nodes
Link: https://lore.kernel.org/r/cover.1681113117.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt
MMC-aliases for rk3288-veyron devices and some dts node adaptions
for yaml conversions recently merged into the drm tree.
* tag 'v6.4-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
ARM: dts: rockchip: fix rk3288 dp node
ARM: dts: rockchip: fix rk3288 lvds node
ARM: dts: rockchip: fix rk3288 dsi node
ARM: dts: rockchip: Add mmc aliases for rk3288-veyron devices
Link: https://lore.kernel.org/r/9713202.NyiUUSuA9g@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into soc/dt
- added D1 crypto node
- enabled DVFS on OrangePi PC2 board
- added GPIO line names on Nezha D1 board
- added suniv USB nodes and enabled on licheepi-nano
- new suniv boards: PopStick v1.1 and Lctech Pi
- added Allwinner T113-s DTSI
- added MangoPi MQ-R T113-s board variant
- swapped DMA names for A23, A31, A33, D1, H3, H5, V3s
* tag 'sunxi-dt-for-6.4-1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
riscv: dts: allwinner: d1: Switch dma-names order for snps,dw-apb-uart nodes
ARM: dts: sunxi: h3/h5: Switch dma-names order for snps,dw-apb-uart nodes
ARM: dts: sun8i: v3s: Switch dma-names order for snps,dw-apb-uart nodes
ARM: dts: sun8i: a23/a33: Switch dma-names order for snps,dw-apb-uart nodes
ARM: dts: sun6i: a31: Switch dma-names order for snps,dw-apb-uart nodes
ARM: dts: sunxi: add MangoPi MQ-R-T113 board
dt-bindings: arm: sunxi: document MangoPi MQ-R board names
ARM: dts: sunxi: add Allwinner T113-s SoC .dtsi
dts: add riscv include prefix link
ARM: dts: suniv: Add Lctech Pi F1C200s devicetree
ARM: dts: suniv: add device tree for PopStick v1.1
dt-binding: arm: sunxi: add two board compatible strings
dt-bindings: vendor-prefixes: add Source Parts and Lctech names
ARM: dts: suniv: licheepi-nano: enable USB
ARM: dts: suniv: add USB-related device nodes
riscv: dts: nezha-d1: add gpio-line-names
arm64: dts: allwinner: h5: OrangePi PC2: add OPP table to enable DVFS
riscv: dts: allwinner: d1: Add crypto engine node
Link: https://lore.kernel.org/r/20230408125156.GA17050@jernej-laptop
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt
i.MX arm32 device tree changes for 6.4:
- New board device trees: Tolino Vison, chargebyte Tarragon,
new revision of the IOTA board.
- A couple of imx7d-remarkable2 update to enable cyttsp5 touch and
BD71815 PMIC.
- A series from Oleksij Rempel to configure Ethernet reference clock
from device tree.
- A series from Stefan Wahren to use label references for i.MX28 based
boards.
* tag 'imx-dt-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (31 commits)
ARM: dts: imx6ull: Add chargebyte Tarragon support
ARM: dts: imx: Add devicetree for Tolino Vison
ARM: dts: imx6dl-yapp43: Add support for new HW revision of the IOTA board
ARM: dts: imx6dl-yapp4: Remove unneeded status "okay"
ARM: dts: imx6dl-yapp4: Move status to the end of property list
ARM: dts: imx6dl-yapp4: Move phy reset into switch node
ARM: dts: imx28-tx28: add SPDX-License-Identifier
ARM: dts: imx28-ts4600: Convert to use label references
ARM: dts: imx28-evk: Convert to use label references
ARM: dts: imx28-duckbill-2: Include base board
ARM: dts: imx28-duckbill: Convert to use label references
ARM: dts: imx28-cfa10036: Convert to use label references
ARM: dts: imx28-apx4devkit: Convert to use label references
ARM: dts: imx28-m28/sps1: Convert to use label references
ARM: dts: imx28-apf28: Convert to use label references
ARM: dts: imx7d-remarkable2: Enable the rohm,bd71815
ARM: dts: imx7d-remarkable2: Enable the cyttsp5
ARM: dts: imx6dl-yapp4: Use reset-gpios property name
ARM: dts: imx6ul-prti6g: configure ethernet reference clock parent
ARM: dts: imx6ul: set enet_clk_ref to CLK_ENETx_REF_SEL
...
Link: https://lore.kernel.org/r/20230408101928.280271-4-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into soc/dt
STM32 DT for v6.4, round 1
Highlights:
----------
- MPU:
- STM32MP13:
- Add FMC support.
- Add QSPI support.
- Add 8 UART instances nodes.
- Enable UART on STM32MP135F-DK:
-UART1/UART8 used on expansion connector.
-UART2 used for BT.
-UART4 used for console.
- STMP32MP15:
- Add STM32MP151 support ( documentation + machine).
- Uart fixes (slew rate, aliases clean-up).
- Fix GPU YAMl issue.
* tag 'stm32-dt-for-v6.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32:
ARM: stm32: add initial documentation for STM32MP151
ARM: dts: stm32: Add QSPI support on STM32MP13x SoC family
ARM: dts: stm32: add FMC support on STM32MP13x SoC family
ARM: dts: stm32: YAML validation fails for Argon Boards
ARM: dts: stm32: YAML validation fails for Odyssey Boards
ARM: dts: stm32: YAML validation fails for STM32MP15 ST Boards
ARM: dts: stm32: add uart nodes and uart aliases on stm32mp135f-dk
ARM: dts: stm32: add pins for usart2/1/4/8 in stm32mp13-pinctrl
ARM: dts: stm32: add uart nodes on stm32mp13
ARM: dts: stm32: clean uart aliases on stm32mp15xx-exx boards
ARM: dts: stm32: clean uart aliases on stm32mp15xx-dkx boards
ARM: dts: stm32: fix slew-rate of USART2 on stm32mp15xx-dkx
ARM: stm32: add support for STM32MP151
ARM: dts: stm32: fix spi1 pin assignment on stm32mp15
ARM: dts: stm32: drop invalid simple-panel compatible on stm32mp157c-lxa
ARM: dts: stm32: Add coprocessor detach mbox on stm32mp15xx-osd32 SoM
Link: https://lore.kernel.org/r/63987ed6-2813-15ff-e058-73312a730d61@foss.st.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/dt
ARM: tegra: Device tree changes for v6.4-rc1
There are several fixes and cleanups here for some of the older Tegra
consumer devices.
* tag 'tegra-for-6.4-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
ARM: tegra30: Use cpu* labels
ARM: tegra30: peripherals: Add 266.5MHz nodes
ARM: tegra: asus-tf101: Fix accelerometer mount matrix
ARM: tegra: transformers: Bind RT5631 sound nodes
ARM: tegra: transformers: Update WM8903 sound nodes
Link: https://lore.kernel.org/r/20230406124804.970394-5-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/dt
Samsung DTS ARM changes for v6.4
1. Several cleanups and improvements as a result of dtbs_checks: align
node names with bindings, drop incorrect properties, fix clock-names,
add missing "ports" node.
2. Move DP and MIPI phys to PMU node (DTS with binding change).
3. Drop old MSHC aliases (while adding proper mmc-ddr-1_8v which was
selected by the driver based on the MSHC alias) and add generic MMC
aliases in each board. The aliases match known numbering in
the schematics.
* tag 'samsung-dt-6.4' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
dt-bindings: soc: samsung: exynos-pmu: allow phys as child on Exynos3 and Exynos4
ARM: dts: exynos: add mmc aliases
ARM: dts: exynos: replace mshc0 alias with mmc-ddr-1_8v property
ARM: dts: exynos: fix MCT compatible in Universal C210
ARM: dts: exynos: move DP and MIPI phys to PMU node in Exynos5250
ARM: dts: exynos: move DP and MIPI phys to PMU node in Exynos5420
ARM: dts: exynos: move MIPI phy to PMU node in Exynos4
ARM: dts: exynos: move MIPI phy to PMU node in Exynos3250
ARM: dts: exynos: drop unused samsung,camclk-out property in Midas
ARM: dts: s5pv210: correct MIPI CSIS clock name
ARM: dts: exynos: correct whitespace in Midas
ARM: dts: exynos: fix WM8960 clock name in Itop Elite
ARM: dts: exynos: add ports to TC358764 bridge on Arndale
ARM: dts: exynos: drop fake align STMPE properties in P4 Note
ARM: dts: exynos: align STMPE ADC node name with bindings in P4 Note
Link: https://lore.kernel.org/r/20230405080438.156805-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/fixes
Lower sd card speeds for two boards to make them run more reliable,
missing 32k clock definition for Anbric xx3 devices, missing cache-levels
for rk3588, fixed rk3326-board display supplies and more dt-schema fixes.
* tag 'v6.3-rockchip-dtsfixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm64: dts: rockchip: correct panel supplies on some rk3326 boards
arm64: dts: rockchip: use just "port" in panel on RockPro64
arm64: dts: rockchip: use just "port" in panel on Pinebook Pro
arm64: dts: rockchip: Remove non-existing pwm-delay-us property
arm64: dts: rockchip: Add clk_rtc_32k to Anbernic xx3 Devices
arm64: dts: rockchip: add rk3588 cache level information
arm64: dts: rockchip: Lower SD card speed on rk3399 Pinebook Pro
arm64: dts: rockchip: Lower sd speed on rk3566-soquartz
ARM: dts: rockchip: fix a typo error for rk3288 spdif node
arm64: dts: rockchip: Fix rk3399 GICv3 ITS node name
Link: https://lore.kernel.org/r/10559306.CDJkKcVGEf@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Add the device tree node for the UART DMA (UDMA) controller.
Signed-off-by: Chia-Wei Wang <chiawei_wang@aspeedtech.com>
Link: https://lore.kernel.org/r/20230320081133.23655-6-chiawei_wang@aspeedtech.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Add mctp node on I2C bus
Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu@Wiwynn.com>
Link: https://lore.kernel.org/r/20230329083235.24123-3-Delphine_CC_Chiu@Wiwynn.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Add GPIO names for SOC lines.
Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com>
Link: https://lore.kernel.org/r/20230329083235.24123-2-Delphine_CC_Chiu@Wiwynn.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Bonnell system supports new ACBEL FSG032 power supply on
I2C addresses 5A and 5B. Update the device tree with new
power supply information and device addresses.
Signed-off-by: Lakshmi Yadlapati <lakshmiy@us.ibm.com>
Reviewed-by: Eddie James <eajames@linux.ibm.com>
Link: https://lore.kernel.org/r/20230412052305.1369521-6-lakshmiy@us.ibm.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
|
|
With commit 8debed3efe3a ("kbuild: export top-level LDFLAGS_vmlinux
only to scripts/Makefile.vmlinux") applied, we no longer see the error
message while building the ARM zImage, but we do not have a good reason
to complicate the file path either.
'$(obj)/../../../../vmlinux' is canonicalized to 'vmlinux'.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
|
|
Commit 370f696e4474 ("dt-bindings: serial: snps-dw-apb-uart: add dma &
dma-names properties") documented dma-names property to handle Allwinner
D1 dtbs_check warnings, but relies on the rx->tx ordering, which is the
reverse of what a bunch of different boards expect.
The initial proposed solution was to allow a flexible dma-names order in
the binding, due to potential ABI breakage concerns after fixing the DTS
files. But luckily the Allwinner boards are not affected, since they are
using a shared DMA channel for rx and tx.
Hence, the first step in fixing the inconsistency was to change
dma-names order in the binding to tx->rx.
Do the same for the snps,dw-apb-uart nodes in the DTS file.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20230321215624.78383-6-cristian.ciocaltea@collabora.com
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
|
|
Commit 370f696e4474 ("dt-bindings: serial: snps-dw-apb-uart: add dma &
dma-names properties") documented dma-names property to handle Allwinner
D1 dtbs_check warnings, but relies on the rx->tx ordering, which is the
reverse of what a bunch of different boards expect.
The initial proposed solution was to allow a flexible dma-names order in
the binding, due to potential ABI breakage concerns after fixing the DTS
files. But luckily the Allwinner boards are not affected, since they are
using a shared DMA channel for rx and tx.
Hence, the first step in fixing the inconsistency was to change
dma-names order in the binding to tx->rx.
Do the same for the snps,dw-apb-uart nodes in the DTS file.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20230321215624.78383-5-cristian.ciocaltea@collabora.com
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
|
|
Commit 370f696e4474 ("dt-bindings: serial: snps-dw-apb-uart: add dma &
dma-names properties") documented dma-names property to handle Allwinner
D1 dtbs_check warnings, but relies on the rx->tx ordering, which is the
reverse of what a bunch of different boards expect.
The initial proposed solution was to allow a flexible dma-names order in
the binding, due to potential ABI breakage concerns after fixing the DTS
files. But luckily the Allwinner boards are not affected, since they are
using a shared DMA channel for rx and tx.
Hence, the first step in fixing the inconsistency was to change
dma-names order in the binding to tx->rx.
Do the same for the snps,dw-apb-uart nodes in the DTS file.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20230321215624.78383-4-cristian.ciocaltea@collabora.com
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
|
|
Commit 370f696e4474 ("dt-bindings: serial: snps-dw-apb-uart: add dma &
dma-names properties") documented dma-names property to handle Allwinner
D1 dtbs_check warnings, but relies on the rx->tx ordering, which is the
reverse of what a bunch of different boards expect.
The initial proposed solution was to allow a flexible dma-names order in
the binding, due to potential ABI breakage concerns after fixing the DTS
files. But luckily the Allwinner boards are not affected, since they are
using a shared DMA channel for rx and tx.
Hence, the first step in fixing the inconsistency was to change
dma-names order in the binding to tx->rx.
Do the same for the snps,dw-apb-uart nodes in the DTS file.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20230321215624.78383-3-cristian.ciocaltea@collabora.com
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
|
|
To align with rest of the devicetree files, let's move the "status"
property to the end of the nodes.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230331145915.11653-2-manivannan.sadhasivam@linaro.org
|
|
The reset and wake properties in the PCIe EP node belong to the board dts
as they can be customized per board design. So let's move them from SoC
dtsi.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230331145915.11653-1-manivannan.sadhasivam@linaro.org
|
|
The DSA framework has got more picky about always having a phy-mode
for the CPU port. The Armada Ethernet supports RGMII, SGMII,
1000base-x and 2500Base-X. Set the switch phy-mode based on how the
SoC Ethernet ports is been configured. For RGMII mode, have the switch
add the delays.
Additionally, the cpu label has never actually been used in the
binding, so remove it.
Lastly, add a fixed-link node indicating the expected speed/duplex of
the link to the SoC.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
|
|
The DSA framework has got more picky about always having a phy-mode
for the CPU port. The Orion5x Ethernet is an RGMII port. Set the
switch to impose the RGMII delays.
Additionally, the cpu label has never actually been used in the
binding, so remove it.
Lastly, add a fixed-link node indicating the expected speed/duplex of
the link to the SoC.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
|
|
The DSA framework has got more picky about always having a phy-mode
for the CPU port. The Kirkwood Ethernet is an RGMII port. Set the
switch to impose the RGMII delays.
Additionally, the cpu label has never actually been used in the
binding, so remove it.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
|
|
Move a few device tree "status" properties so that they are the last
specified property, in "qcom-sdx65-mtp.dts" and "qcom-sdx65.dtsi".
Note that properties must always be specified before sub-nodes.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Suggested-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230327195605.2854123-3-elder@linaro.org
|
|
Add IPA-related nodes and definitions to "sdx65.dtsi". The SMP2P
nodes (ipa_smp2p_out and ipa_smp2p_in) are already present.
Enable IPA in "sdx65-mtp.dts"; this GSI firmware is loaded by Trust
Zone on this platform.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Tested-by: Rohit Agarwal <quic_rohiagar@quicinc.com>
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230327195605.2854123-2-elder@linaro.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes
i.MX fixes for 6.3, 2nd round:
- Fix 'reg' address length for i.MX8MP LCDIF2 device.
- A couple of changes from Fabio Estevam to fix DTC warnings caused
unnecessary address/size cells.
- Re-enable PCI driver support in imx_v6_v7_defconfig.
- Fix PMIC clock source property for imx8mm-evk board.
- A couple of fixes from Peng Fan to correct off-on delay property for
i.MX8 Verdin boards.
* tag 'imx-fixes-6.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: imx_v6_v7_defconfig: Fix unintentional disablement of PCI
ARM: dts: imx6ull-colibri: Remove unnecessary #address-cells/#size-cells
ARM: dts: imx7d-remarkable2: Remove unnecessary #address-cells/#size-cells
arm64: dts: imx8mp-verdin: correct off-on-delay
arm64: dts: imx8mm-verdin: correct off-on-delay
arm64: dts: imx8mm-evk: correct pmic clock source
arm64: dts: imx8mp: fix address length for LCDIF2
Link: https://lore.kernel.org/r/20230406021602.GP11367@dragon
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
This adds the support for chargebyte Tarragon, which is an Electrical
Vehicle Supply Equipment (EVSE) for AC charging stations
(according to IEC 61851, ISO 15118).
The Tarragon board is based on an i.MX6ULL SoC and is available in
4 variants (Master, Slave, SlaveXT, Micro), which provide more or
less peripherals.
Supported features:
* 512 MB DDR RAM
* eMMC
* Debug UART
* 100 Mbit Ethernet
* USB 2.0 Host interface
* Powerline communication (QCA700x)
* 2x RS485
* Digital in- and outputs (12 V)
* One-Wire master for external temp sensors
* 2x relay outputs
* 2x motor interfaces
Link: https://chargebyte.com/products/charging-station-communication/charge-control-c
Signed-off-by: Stefan Wahren <stefan.wahren@chargebyte.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next
Marc Kleine-Budde says:
====================
pull-request: can-next 2023-04-04-2
The first patch is by Oliver Hartkopp and makes the maximum pdu size
of the CAN ISOTP protocol configurable.
The following 5 patches are by Dario Binacchi and add support for the
bxCAN controller by ST.
Geert Uytterhoeven's patch for the rcar_canfd driver fixes a sparse
warning.
Peng Fan's patch adds an optional power-domains property to the
flexcan device tree binding.
Frank Jungclaus adds support for CAN_CTRLMODE_BERR_REPORTING to the
esd_usb driver.
The last patch is by Oliver Hartkopp and converts the USB IDs of the
kvaser_usb driver to hexadecimal values.
* tag 'linux-can-next-for-6.4-20230404-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next:
kvaser_usb: convert USB IDs to hexadecimal values
can: esd_usb: Add support for CAN_CTRLMODE_BERR_REPORTING
dt-bindings: can: fsl,flexcan: add optional power-domains property
can: rcar_canfd: rcar_canfd_probe(): fix plain integer in transceivers[] init
can: bxcan: add support for ST bxCAN controller
ARM: dts: stm32: add pin map for CAN controller on stm32f4
ARM: dts: stm32: add CAN support on stm32f429
dt-bindings: net: can: add STM32 bxcan DT bindings
dt-bindings: arm: stm32: add compatible for syscon gcan node
can: isotp: add module parameter for maximum pdu size
====================
Link: https://lore.kernel.org/r/20230404145908.1714400-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Building with W=1 leads to the following dtc warning:
arch/arm/boot/dts/imx6ull-colibri.dtsi:36.9-46.5: Warning (graph_child_address): /connector/ports: graph node has single child node 'port@0', #address-cells/#size-cells are not necessary
Since a single port is used, 'ports' can be removed, as well as the
unnecessary #address-cells/#size-cells.
Fixes: bd5880e10982 ("ARM: dts: colibri-imx6ull: Enable dual-role switching")
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Building with W=1 leads to the following dtc warning:
arch/arm/boot/dts/imx7d-remarkable2.dts:319.19-335.4: Warning (avoid_unnecessary_addr_size): /soc/bus@30800000/i2c@30a50000/pmic@62: unnecessary #address-cells/#size-cells without "ranges" or child "reg" property
Remove unnecessary #address-cells/#size-cells to fix it.
Fixes: 9076cbaa7757 ("ARM: dts: imx7d-remarkable2: Enable silergy,sy7636a")
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Alistair Francis <alistair@alistair23.me>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux into soc/dt
Amlogic ARM DT changes for v6.4:
- adjust order of some compatibles
- meson8: add the xtal_32k_out pin
- meson8: add the SDXC_A pins
- mxiii-plus: Enable Bluetooth and WiFi support
* tag 'amlogic-arm-dt-for-v6.4' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux:
ARM: dts: meson8m2: mxiii-plus: Enable Bluetooth and WiFi support
ARM: dts: meson8: add the SDXC_A pins
ARM: dts: meson8: add the xtal_32k_out pin
arm: dts: meson: adjust order of some compatibles
Link: https://lore.kernel.org/r/eb1f32f8-822d-9cfc-fca6-9e044bf4a5ab@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Due to lack of maintainance and stall of development for a few years now,
and since no new features will ever be added upstream, remove support
for OX810 and OX820 devices.
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into soc/dt
AT91 device tree updates for 6.4:
It contains:
- Update to maximum frequency for QSPI on several boards thanks
to the additon of the new spi-cs-setup-ns property.
* tag 'at91-dt-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
ARM: dts: at91: sam9x60ek: Set sst26vf064b SPI NOR flash at its maximum frequency
ARM: dts: at91: sama5d2_icp: Set sst26vf064b SPI NOR flash at its maximum frequency
ARM: dts: at91-sama5d27_som1: Set sst26vf064b SPI NOR flash at its maximum frequency
ARM: dts: at91-sama5d27_wlsom1: Set sst26vf064b SPI NOR flash at its maximum frequency
Link: https://lore.kernel.org/r/20230331142751.41522-1-nicolas.ferre@microchip.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
