summaryrefslogtreecommitdiff
path: root/arch/arm/boot
AgeCommit message (Collapse)Author
2017-11-16Merge tag 'armsoc-dt' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM device-tree updates from Arnd Bergmann: "We add device tree files for a couple of additional SoCs in various areas: Allwinner R40/V40 for entertainment, Broadcom Hurricane 2 for networking, Amlogic A113D for audio, and Renesas R-Car V3M for automotive. As usual, lots of new boards get added based on those and other SoCs: - Actions S500 based CubieBoard6 single-board computer - Amlogic Meson-AXG A113D based development board - Amlogic S912 based Khadas VIM2 single-board computer - Amlogic S912 based Tronsmart Vega S96 set-top-box - Allwinner H5 based NanoPi NEO Plus2 single-board computer - Allwinner R40 based Banana Pi M2 Ultra and Berry single-board computers - Allwinner A83T based TBS A711 Tablet - Broadcom Hurricane 2 based Ubiquiti UniFi Switch 8 - Broadcom bcm47xx based Luxul XAP-1440/XAP-810/ABR-4500/XBR-4500 wireless access points and routers - NXP i.MX51 based Zodiac Inflight Innovations RDU1 board - NXP i.MX53 based GE Healthcare PPD biometric monitor - NXP i.MX6 based Pistachio single-board computer - NXP i.MX6 based Vining-2000 automotive diagnostic interface - NXP i.MX6 based Ka-Ro TX6 Computer-on-Module in additional variants - Qualcomm MSM8974 (Snapdragon 800) based Fairphone 2 phone - Qualcomm MSM8974pro (Snapdragon 801) based Sony Xperia Z2 Tablet - Realtek RTD1295 based set-top-boxes MeLE V9 and PROBOX2 AVA - Renesas R-Car V3M (R8A77970) SoC and "Eagle" reference board - Renesas H3ULCB and M3ULCB "Kingfisher" extension infotainment boards - Renasas r8a7745 based iWave G22D-SODIMM SoM - Rockchip rk3288 based Amarula Vyasa single-board computer - Samsung Exynos5800 based Odroid HC1 single-board computer For existing SoC support, there was a lot of ongoing work, as usual most of that concentrated on the Renesas, Rockchip, OMAP, i.MX, Amlogic and Allwinner platforms, but others were also active. Rob Herring and many others worked on reducing the number of issues that the latest version of 'dtc' now warns about. Unfortunately there is still a lot left to do. A rework of the ARM foundation model introduced several new files for common variations of the model" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (599 commits) arm64: dts: uniphier: route on-board device IRQ to GPIO controller for PXs3 dt-bindings: bus: Add documentation for the Technologic Systems NBUS arm64: dts: actions: s900-bubblegum-96: Add fake uart5 clock ARM: dts: owl-s500: Add CubieBoard6 dt-bindings: arm: actions: Add CubieBoard6 ARM: dts: owl-s500-guitar-bb-rev-b: Add fake uart3 clock ARM: dts: owl-s500: Set power domains for CPU2 and CPU3 arm: dts: mt7623: remove unused compatible string for pio node arm: dts: mt7623: update usb related nodes arm: dts: mt7623: update crypto node ARM: dts: sun8i: a711: Enable USB OTG ARM: dts: sun8i: a711: Add regulator support ARM: dts: sun8i: a83t: bananapi-m3: Enable AP6212 WiFi on mmc1 ARM: dts: sun8i: a83t: cubietruck-plus: Enable AP6330 WiFi on mmc1 ARM: dts: sun8i: a83t: Move mmc1 pinctrl setting to dtsi file ARM: dts: sun8i: a83t: allwinner-h8homlet-v2: Add AXP818 regulator nodes ARM: dts: sun8i: a83t: bananapi-m3: Add AXP813 regulator nodes ARM: dts: sun8i: a83t: cubietruck-plus: Add AXP818 regulator nodes ARM: dts: sunxi: Add dtsi for AXP81x PMIC arm64: dts: allwinner: H5: Restore EMAC changes ...
2017-11-16Merge tag 'armsoc-soc' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC platform updates from Arnd Bergmann: "Most of the commits are for defconfig changes, to enable newly added drivers or features that people have started using. For the changed lines lines, we have mostly cleanups, the affected platforms are OMAP, Versatile, EP93xx, Samsung, Broadcom, i.MX, and Actions. The largest single change is the introduction of the TI "sysc" bus driver, with the intention of cleaning up more legacy code. Two new SoC platforms get added this time: - Allwinner R40 is a modernized version of the A20 chip, now with a Quad-Core ARM Cortex-A7. According to the manufacturer, it is intended for "Smart Hardware" - Broadcom Hurricane 2 (Aka Strataconnect BCM5334X) is a family of chips meant for managed gigabit ethernet switches, based around a Cortex-A9 CPU. Finally, we gain SMP support for two platforms: Renesas R-Car E2 and Amlogic Meson8/8b, which were previously added but only supported uniprocessor operation" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (118 commits) ARM: multi_v7_defconfig: Select RPMSG_VIRTIO as module ARM: multi_v7_defconfig: enable CONFIG_GPIO_UNIPHIER arm64: defconfig: enable CONFIG_GPIO_UNIPHIER ARM: meson: enable MESON_IRQ_GPIO in Kconfig for meson8b ARM: meson: Add SMP bringup code for Meson8 and Meson8b ARM: smp_scu: allow the platform code to read the SCU CPU status ARM: smp_scu: add a helper for powering on a specific CPU dt-bindings: Amlogic: Add Meson8 and Meson8b SMP related documentation ARM: OMAP3: Delete an unnecessary variable initialisation in omap3xxx_hwmod_init() ARM: OMAP3: Use common error handling code in omap3xxx_hwmod_init() ARM: defconfig: select the right SX150X driver arm64: defconfig: Enable QCOM_IOMMU arm64: Add ThunderX drivers to defconfig arm64: defconfig: Enable Tegra PCI controller cpufreq: imx6q: Move speed grading check to cpufreq driver arm64: defconfig: re-enable Qualcomm DB410c USB ARM: configs: stm32: Add MDMA support in STM32 defconfig ARM: imx: Enable cpuidle for i.MX6DL starting at 1.1 bus: ti-sysc: Fix unbalanced pm_runtime_enable by adding remove bus: ti-sysc: mark PM functions as __maybe_unused ...
2017-11-16Merge branch 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-armLinus Torvalds
Pull ARM updates from Russell King: - add support for ELF fdpic binaries on both MMU and noMMU platforms - linker script cleanups - support for compressed .data section for XIP images - discard memblock arrays when possible - various cleanups - atomic DMA pool updates - better diagnostics of missing/corrupt device tree - export information to allow userspace kexec tool to place images more inteligently, so that the device tree isn't overwritten by the booting kernel - make early_printk more efficient on semihosted systems - noMMU cleanups - SA1111 PCMCIA update in preparation for further cleanups * 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: (38 commits) ARM: 8719/1: NOMMU: work around maybe-uninitialized warning ARM: 8717/2: debug printch/printascii: translate '\n' to "\r\n" not "\n\r" ARM: 8713/1: NOMMU: Support MPU in XIP configuration ARM: 8712/1: NOMMU: Use more MPU regions to cover memory ARM: 8711/1: V7M: Add support for MPU to M-class ARM: 8710/1: Kconfig: Kill CONFIG_VECTORS_BASE ARM: 8709/1: NOMMU: Disallow MPU for XIP ARM: 8708/1: NOMMU: Rework MPU to be mostly done in C ARM: 8707/1: NOMMU: Update MPU accessors to use cp15 helpers ARM: 8706/1: NOMMU: Move out MPU setup in separate module ARM: 8702/1: head-common.S: Clear lr before jumping to start_kernel() ARM: 8705/1: early_printk: use printascii() rather than printch() ARM: 8703/1: debug.S: move hexbuf to a writable section ARM: add additional table to compressed kernel ARM: decompressor: fix BSS size calculation pcmcia: sa1111: remove special sa1111 mmio accessors pcmcia: sa1111: use sa1111_get_irq() to obtain IRQ resources ARM: better diagnostics with missing/corrupt dtb ARM: 8699/1: dma-mapping: Remove init_dma_coherent_pool_size() ARM: 8698/1: dma-mapping: Mark atomic_pool as __ro_after_init ..
2017-11-15Merge tag 'media/v4.15-1' of ↵Linus Torvalds
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: - Documentation for digital TV (both kAPI and uAPI) are now in sync with the implementation (except for legacy/deprecated ioctls). This is a major step, as there were always a gap there - New sensor driver: imx274 - New cec driver: cec-gpio - New platform driver for rockship rga and tegra CEC - New RC driver: tango-ir - Several cleanups at atomisp driver - Core improvements for RC, CEC, V4L2 async probing support and DVB - Lots of drivers cleanup, fixes and improvements. * tag 'media/v4.15-1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (332 commits) dvb_frontend: don't use-after-free the frontend struct media: dib0700: fix invalid dvb_detach argument media: v4l2-ctrls: Don't validate BITMASK twice media: s5p-mfc: fix lockdep warning media: dvb-core: always call invoke_release() in fe_free() media: usb: dvb-usb-v2: dvb_usb_core: remove redundant code in dvb_usb_fe_sleep media: au0828: make const array addr_list static media: cx88: make const arrays default_addr_list and pvr2000_addr_list static media: drxd: make const array fastIncrDecLUT static media: usb: fix spelling mistake: "synchronuously" -> "synchronously" media: ddbridge: fix build warnings media: av7110: avoid 2038 overflow in debug print media: Don't do DMA on stack for firmware upload in the AS102 driver media: v4l: async: fix unregister for implicitly registered sub-device notifiers media: v4l: async: fix return of unitialized variable ret media: imx274: fix missing return assignment from call to imx274_mode_regs media: camss-vfe: always initialize reg at vfe_set_xbar_cfg() media: atomisp: make function calls cleaner media: atomisp: get rid of storage_class.h media: atomisp: get rid of wrong stddef.h include ...
2017-11-14Merge tag 'devicetree-for-4.15' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull DeviceTree updates from Rob Herring: "A bigger diffstat than usual with the kbuild changes and a tree wide fix in the binding documentation. Summary: - kbuild cleanups and improvements for dtbs - Code clean-up of overlay code and fixing for some long standing memory leak and race condition in applying overlays - Improvements to DT memory usage making sysfs/kobjects optional and skipping unflattening of disabled nodes. This is part of kernel tinification efforts. - Final piece of removing storing the full path for every DT node. The prerequisite conversion of printk's to use device_node format specifier happened in 4.14. - Sync with current upstream dtc. This brings additional checks to dtb compiling. - Binding doc tree wide removal of leading 0s from examples - RTC binding documentation adding missing devices and some consolidation of duplicated bindings - Vendor prefix documentation for nutsboard, Silicon Storage Technology, shimafuji, Tecon Microprocessor Technologies, DH electronics GmbH, Opal Kelly, and Next Thing" * tag 'devicetree-for-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (55 commits) dt-bindings: usb: add #phy-cells to usb-nop-xceiv dt-bindings: Remove leading zeros from bindings notation kbuild: handle dtb-y and CONFIG_OF_ALL_DTBS natively in Makefile.lib MIPS: dts: remove bogus bcm96358nb4ser.dtb from dtb-y entry kbuild: clean up *.dtb and *.dtb.S patterns from top-level Makefile .gitignore: move *.dtb and *.dtb.S patterns to the top-level .gitignore .gitignore: sort normal pattern rules alphabetically dt-bindings: add vendor prefix for Next Thing Co. scripts/dtc: Update to upstream version v1.4.5-6-gc1e55a5513e9 of: dynamic: fix memory leak related to properties of __of_node_dup of: overlay: make pr_err() string unique of: overlay: pr_err from return NOTIFY_OK to overlay apply/remove of: overlay: remove unneeded check for NULL kbasename() of: overlay: remove a dependency on device node full_name of: overlay: simplify applying symbols from an overlay of: overlay: avoid race condition between applying multiple overlays of: overlay: loosen overly strict phandle clash check of: overlay: expand check of whether overlay changeset can be removed of: overlay: detect cases where device tree may become corrupt of: overlay: minor restructuring ...
2017-11-14Merge tag 'staging-4.15-rc1' into v4l_for_linusMauro Carvalho Chehab
There are some conflicts between staging and media trees, as reported by Stephen Rothwell <sfr@canb.auug.org.au>. So, merge from staging. * tag 'staging-4.15-rc1': (775 commits) staging: lustre: add SPDX identifiers to all lustre files staging: greybus: Remove redundant license text staging: greybus: add SPDX identifiers to all greybus driver files staging: ccree: simplify ioread/iowrite staging: ccree: simplify registers access staging: ccree: simplify error handling logic staging: ccree: remove dead code staging: ccree: handle limiting of DMA masks staging: ccree: copy IV to DMAable memory staging: fbtft: remove redundant initialization of buf staging: sm750fb: Fix parameter mistake in poke32 staging: wilc1000: Fix bssid buffer offset in Txq staging: fbtft: fb_ssd1331: fix mirrored display staging: android: Fix checkpatch.pl error staging: greybus: loopback: convert loopback to use generic async operations staging: greybus: operation: add private data with get/set accessors staging: greybus: loopback: Fix iteration count on async path staging: greybus: loopback: Hold per-connection mutex across operations staging: greybus/loopback: use ktime_get() for time intervals staging: fsl-dpaa2/eth: Extra headroom in RX buffers ... Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-11-13Merge tag 'tty-4.15-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial updates from Greg KH: "Here is the big tty/serial driver pull request for 4.15-rc1. Lots of serial driver updates in here, some small vt cleanups, and a raft of SPDX and license boilerplate cleanups, messing up the diffstat a bit. Nothing major, with no realy functional changes except better hardware support for some platforms. All of these have been in linux-next for a while with no reported issues" * tag 'tty-4.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (110 commits) tty: ehv_bytechan: fix spelling mistake tty: serial: meson: allow baud-rates lower than 9600 serial: 8250_fintek: Fix crash with baud rate B0 serial: 8250_fintek: Disable delays for ports != 0 serial: 8250_fintek: Return -EINVAL on invalid configuration tty: Remove redundant license text tty: serdev: Remove redundant license text tty: hvc: Remove redundant license text tty: serial: Remove redundant license text tty: add SPDX identifiers to all remaining files in drivers/tty/ tty: serial: jsm: remove redundant pointer ts tty: serial: jsm: add space before the open parenthesis '(' tty: serial: jsm: fix coding style tty: serial: jsm: delete space between function name and '(' tty: serial: jsm: add blank line after declarations tty: serial: jsm: change the type of local variable tty: serial: imx: remove dead code imx_dma_rxint tty: serial: imx: disable ageing timer interrupt if dma in use serial: 8250: fix potential deadlock in rs485-mode serial: m32r_sio: Drop redundant .data assignment ...
2017-11-09kbuild: handle dtb-y and CONFIG_OF_ALL_DTBS natively in Makefile.libMasahiro Yamada
If CONFIG_OF_ALL_DTBS is enabled, "make ARCH=arm64 dtbs" compiles each DTB twice; one from arch/arm64/boot/dts/*/Makefile and the other from the dtb-$(CONFIG_OF_ALL_DTBS) line in arch/arm64/boot/dts/Makefile. It could be a race problem when building DTBS in parallel. Another minor issue is CONFIG_OF_ALL_DTBS covers only *.dts in vendor sub-directories, so this broke when Broadcom added one more hierarchy in arch/arm64/boot/dts/broadcom/<soc>/. One idea to fix the issues in a clean way is to move DTB handling to Kbuild core scripts. Makefile.dtbinst already recognizes dtb-y natively, so it should not hurt to do so. Add $(dtb-y) to extra-y, and $(dtb-) as well if CONFIG_OF_ALL_DTBS is enabled. All clutter things in Makefiles go away. As a bonus clean-up, I also removed dts-dirs. Just use subdir-y directly to traverse sub-directories. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Arnd Bergmann <arnd@arndb.de> [robh: corrected BUILTIN_DTB to CONFIG_BUILTIN_DTB] Signed-off-by: Rob Herring <robh@kernel.org>
2017-11-08Merge branch 'devel-stable' into for-nextRussell King
2017-11-08Merge branches 'fixes', 'misc' and 'sa1111-for-next' into for-nextRussell King
2017-11-08kbuild: clean up *.dtb and *.dtb.S patterns from top-level MakefileMasahiro Yamada
We need to add "clean-files" in Makfiles to clean up DT blobs, but we often miss to do so. Since there are no source files that end with .dtb or .dtb.S, so we can clean-up those files from the top-level Makefile. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Rob Herring <robh@kernel.org>
2017-11-08.gitignore: move *.dtb and *.dtb.S patterns to the top-level .gitignoreMasahiro Yamada
Most of DT files are compiled under arch/*/boot/dts/, but we have some other directories, like drivers/of/unittest-data/. We often miss to add gitignore patterns per directory. Since there are no source files that end with .dtb or .dtb.S, we can ignore the patterns globally. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Rob Herring <robh@kernel.org>
2017-11-07Merge tag 'v4.15-rockchip-dts32-2' of ↵Arnd Bergmann
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt Pull "Rockchip dts32 updates for 4.15 part2" from Heiko Stübner: CEC support for the two rk3288-firefly variants and general hdmi support for the firefly-reload. A lot of additions and corrections for the rk3288-vyasa and thermal support for the rv1108. * tag 'v4.15-rockchip-dts32-2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: ARM: dts: rockchip: enable the hdmi output on the rk3288-firefly-reload ARM: dts: rockchip: define the two possible rk3288 CEC pins ARM: dts: rockchip: add the cec clk for dw-hdmi on rk3288 ARM: dts: rockchip: Add io domains for rk3288-vyasa ARM: dts: rockchip: Add usb otg for rk3288-vyasa ARM: dts: rockchip: Add usb host for rk3288-vyasa ARM: dts: rockchip: Add gmac support for rk3288-vyasa board ARM: dts: rockchip: Add regulators for rk3288-vyasa ARM: dts: rockchip: Use vmmc-supply from PMIC on rk3288-vyasa ARM: dts: rockchip: Remove vdd_log from rk808, DCDC_REG1 on rk3288-vyasa ARM: dts: rockchip: enable tsadc module on RV1108 evaluation board ARM: dts: rockchip: add thermal nodes for RV1108 SoC ARM: dts: rockchip: add tsadc node for RV1108 SoC ARM: dts: rockchip: add RGA device node for RK3288
2017-11-07Merge tag 'sunxi-dt-for-4.15-2' of ↵Arnd Bergmann
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/dt Pull "Allwinner DT changes for 4.15, take 2" from Maxime Ripard: Here are a few commits that would be great to get in 4.15, given how long they've been hanging around. The first and most important one is the reintroduction of the EMAC DT changes after they've been reverted at the last minute in 4.13. There's a arm64 patch that crept in because the H5 and H3 share a common DTSI that is located in arch/arm, and merging that patch through the arm64 PR, especially given the pull requests that have already been sent, would just have generated too many conflicts. * tag 'sunxi-dt-for-4.15-2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: ARM: dts: sun8i: a711: Enable USB OTG ARM: dts: sun8i: a711: Add regulator support ARM: dts: sun8i: a83t: bananapi-m3: Enable AP6212 WiFi on mmc1 ARM: dts: sun8i: a83t: cubietruck-plus: Enable AP6330 WiFi on mmc1 ARM: dts: sun8i: a83t: Move mmc1 pinctrl setting to dtsi file ARM: dts: sun8i: a83t: allwinner-h8homlet-v2: Add AXP818 regulator nodes ARM: dts: sun8i: a83t: bananapi-m3: Add AXP813 regulator nodes ARM: dts: sun8i: a83t: cubietruck-plus: Add AXP818 regulator nodes ARM: dts: sunxi: Add dtsi for AXP81x PMIC arm64: dts: allwinner: H5: Restore EMAC changes ARM: dts: sunxi: Restore EMAC changes (boards) ARM: dts: sunxi: h3/h5: represent the mdio switch used by sun8i-h3-emac arm: dts: sunxi: h3/h5: Restore EMAC changes dt-bindings: net: dwmac-sun8i: update documentation about integrated PHY dt-bindings: net: Restore sun8i dwmac binding
2017-11-07Merge tag 'v4.14-next-dts32-2' of https://github.com/mbgg/linux-mediatek ↵Arnd Bergmann
into next/dt Pull "Mediatek: 32-bit DTS updates for v4.15" from Matthias Brugger: - mt7623 update nodes to binding description - mt2701 add display pwn nodes - mt2701 update audio node description * tag 'v4.14-next-dts32-2' of https://github.com/mbgg/linux-mediatek: arm: dts: mt7623: remove unused compatible string for pio node arm: dts: mt7623: update usb related nodes arm: dts: mt7623: update crypto node arm: dts: mediatek: update audio node for mt2701 and mt7623 arm: dts: mt2701: enable display pwm backlight arm: dts: mt2701: add pwm backlight device node
2017-11-07Merge tag 'actions-arm-dt-for-4.15' of ↵Arnd Bergmann
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/afaerber/linux-actions into next/dt Pull "Actions Semi ARM based SoC DT for v4.15" from Andreas Färber: This updates the Guitar board DT with a clock node for the debug UART and adds a new DT for the CubieBoard6. It also updates the S500 DT with CPU power domains. * tag 'actions-arm-dt-for-4.15' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/afaerber/linux-actions: ARM: dts: owl-s500: Add CubieBoard6 dt-bindings: arm: actions: Add CubieBoard6 ARM: dts: owl-s500-guitar-bb-rev-b: Add fake uart3 clock ARM: dts: owl-s500: Set power domains for CPU2 and CPU3
2017-11-04Merge branch 'fixes' of git://git.armlinux.org.uk/~rmk/linux-armLinus Torvalds
Pull ARM fixes from Russell King: - omit EFI memory map sorting, which was recently introduced, but caused problems with the decompressor due to additional sections being emitted. - avoid unaligned load fault-generating instructions in the decompressor by switching to a private unaligned implementation. - add a symbol into the decompressor to further debug non-boot situations (ld's documentation is extremely poor for how "." works, ld doesn't seem to follow its own documentation!) - parse endian information to sparse * 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: add debug ".edata_real" symbol ARM: 8716/1: pass endianness info to sparse efi/libstub: arm: omit sorting of the UEFI memory map ARM: 8715/1: add a private asm/unaligned.h
2017-11-04Merge tag 'armsoc-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Arnd Bergmann: "Only two patches came in over the last two weeks: Uniphier USB support needs additional clocks enabled (on both 32-bit and 64-bit ARM), and a Marvell MVEBU stability issue has been fixed" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: dts: mvebu: pl310-cache disable double-linefill arm64: dts: uniphier: add STDMAC clock to EHCI nodes ARM: dts: uniphier: add STDMAC clock to EHCI nodes
2017-11-04ARM: dts: owl-s500: Add CubieBoard6Andreas Färber
Add a Device Tree for Cubietech CubieBoard6. Cc: support@cubietech.com Signed-off-by: Andreas Färber <afaerber@suse.de>
2017-11-04ARM: dts: owl-s500-guitar-bb-rev-b: Add fake uart3 clockAndreas Färber
Add a fixed-clock for baudrate 115200. Signed-off-by: Andreas Färber <afaerber@suse.de>
2017-11-04ARM: dts: owl-s500: Set power domains for CPU2 and CPU3Andreas Färber
CPU2 has its own power domain PD_CPU2, and CPU3 has PD_CPU3. Signed-off-by: Andreas Färber <afaerber@suse.de>
2017-11-02arm: dts: mt7623: remove unused compatible string for pio nodeRyder Lee
MT7623 has its own compatible in pinctrl driver so we don't need the backward compatible for it. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2017-11-02arm: dts: mt7623: update usb related nodesRyder Lee
The current usb related nodes are out-of-date, so we make them be consistent with the binding documents. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2017-11-02arm: dts: mt7623: update crypto nodeRyder Lee
This patch updates compatible string and clocks for the crypto node. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02ARM: dts: sun8i: a711: Enable USB OTGMaxime Ripard
The TBS A711 has a micro-USB connector that can be used in OTG mode. Enable it. Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-11-02ARM: dts: sun8i: a711: Add regulator supportMaxime Ripard
The TBS A711 is using an AXP813 PMIC. Let's add all the regulators for that board, and migrate the current, dumb, regulators to the actual ones. Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-11-02ARM: dts: sun8i: a83t: bananapi-m3: Enable AP6212 WiFi on mmc1Chen-Yu Tsai
The WiFi side of the AP6212 WiFi/BT combo module is connected to mmc1. There are also GPIOs for enable and interrupts. An external clock from the AC100 RTC is also used. Enable WiFi on this board by enabling mmc1 and adding the power sequencing clocks and GPIO, as well as the chip's interrupt line. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-11-02ARM: dts: sun8i: a83t: cubietruck-plus: Enable AP6330 WiFi on mmc1Chen-Yu Tsai
The WiFi side of the AP6330 WiFi/BT combo module is connected to mmc1. There are also GPIOs for enable and interrupts. An external clock from the AC100 RTC is also used. Enable WiFi on this board by enabling mmc1 and adding the power sequencing clocks and GPIO, as well as the chip's interrupt line. For the WiFi module to correctly detect the frequency of its main oscillator, the external low power clock must be set to 32768 Hz. Their does not seem to be proper out-of-band interrupt support for the BCM4330 chip within the AP6330 module. This part is left out for now. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-11-02ARM: dts: sun8i: a83t: Move mmc1 pinctrl setting to dtsi fileChen-Yu Tsai
mmc1 only has 1 possible pinmux setting. Move any settings to the dtsi file and set it by default. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-11-02ARM: dts: sun8i: a83t: allwinner-h8homlet-v2: Add AXP818 regulator nodesChen-Yu Tsai
This patch adds device nodes for all the regulators of the AXP818 PMIC. Sunxi common regulators are removed, and USB VBUS regulators are added. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-11-02ARM: dts: sun8i: a83t: bananapi-m3: Add AXP813 regulator nodesChen-Yu Tsai
This patch adds device nodes for all the regulators of the AXP813 PMIC. Sunxi common regulators are removed, and USB VBUS regulators are added. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-11-02ARM: dts: sun8i: a83t: cubietruck-plus: Add AXP818 regulator nodesChen-Yu Tsai
This patch adds device nodes for all the regulators of the AXP818 PMIC. Sunxi common regulators are removed, and USB VBUS regulators are added. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-11-02ARM: dts: sunxi: Add dtsi for AXP81x PMICChen-Yu Tsai
The AXP81x family of PMIC is used with the Allwinner A83T and H8 SoCs. This includes the AXP813 and AXP818. There is no discernible difference except the labeling. The AXP813 is paired with the A83T, while the AXP818 is paired with the H8. This patch adds a dtsi file for all the common bindings for these two PMICs. Currently this is just listing all the regulator nodes. The regulators are initialized based on their device node names. In the future this would be expanded to include power supplies and GPIO controllers. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-11-02ARM: dts: sunxi: Restore EMAC changes (boards)Corentin Labbe
The original dwmac-sun8i DT bindings have some issue on how to handle integrated PHY and was reverted in last RC of 4.13. But now we have a solution so we need to get back that was reverted. This patch restore all boards DT about dwmac-sun8i This reverts partially commit fe45174b72ae ("arm: dts: sunxi: Revert EMAC changes") Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-11-02ARM: dts: sunxi: h3/h5: represent the mdio switch used by sun8i-h3-emacCorentin Labbe
Since dwmac-sun8i could use either an integrated PHY or an external PHY (which could be at same MDIO address), we need to represent this selection by a MDIO switch. Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-11-02arm: dts: sunxi: h3/h5: Restore EMAC changesCorentin Labbe
The original dwmac-sun8i DT bindings have some issue on how to handle integrated PHY and was reverted in last RC of 4.13. But now we have a solution so we need to get back that was reverted. This patch restore sunxi-h3-h5.dtsi This reverts partially commit fe45174b72ae ("arm: dts: sunxi: Revert EMAC changes") Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-11-02ARM: add debug ".edata_real" symbolRussell King
Add an additional symbol to the decompressor image, which will allow future debugging of non-bootable problems similar to the one encountered with the EFI stub. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2017-10-31media: arm: dts: omap3: N9/N950: Add flash references to the cameraSakari Ailus
Add flash and indicator LED phandles to the sensor node. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Pavel Machek <pavel@ucw.cz> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-10-30Merge tag 'mvebu-fixes-4.14-3' of git://git.infradead.org/linux-mvebu into fixesArnd Bergmann
Pull "mvebu fixes for 4.14 (part 3)" from Gregory CLEMENT: Fixing an old stability issue on Cortex A9 based mvebu SoC * tag 'mvebu-fixes-4.14-3' of git://git.infradead.org/linux-mvebu: ARM: dts: mvebu: pl310-cache disable double-linefill
2017-10-30Merge tag 'amlogic-dt64' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into next/dt Pull "Amlogic 64-bit platforms: DT updates for v4.15" from Kevin Hilman: - new SoC support: A113D - new boards: Tronsmart Vega S96, Khadas vim2 - reserved memory fixups - gpio-names cleanups - MMC cleanups, enable high-speed modes - misc cleanups * tag 'amlogic-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: arm64: dts: meson-axg: add initial A113D SoC DT support dt-bindings: arm: amlogic: Add Meson AXG binding ARM64: dts: meson-gx: remove unnecessary uart compatible ARM64: dts: meson-gx: remove unnecessary clocks properties ARM64: dts: meson-gxl: Add alternate ARM Trusted Firmware reserved memory zone ARM64: dts: meson-gxm: enable HS400 on the vim2 ARM64: dts: meson-gxbb-nexbox-a95x: Enable USB Nodes dt-bindings: arm: amlogic: Add Tronsmart Vega S96 binding ARM64: dts: meson-gxm: Add Vega S96 board ARM64: dts: meson-gxm: Add support for Khadas VIM2 ARM64: dts: meson-gxl: Take eMMC data strobe out of eMMC pins ARM64: dts: meson-gxl: adjust libretech-cc gpio-line-names ARM64: dts: meson-gxl: adjust kvim gpio-line-names ARM64: dts: meson-gxbb: adjust odroid-c2 gpio-line-names ARM64: dts: meson-gxbb: adjust nanopi-k2 gpio-line-names ARM64: dts: meson-gx: adjust gpio-ranges for TEST_N ARM64: dts: meson-gx: remove gpio offset ARM: dts: meson8: remove gpio offset ARM64: dts: meson-gxl-libretech-cc: enable internal phy leds ARM64: dts: meson-gxl-libretech-cc: enable saradc
2017-10-30Merge tag 'amlogic-dt-2' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into next/dt Pull "Amlogic 32-bit DT updates for v4.15, round 2" from Kevin Hilman: - enable new GPIO IRQ controller - add efuse node * tag 'amlogic-dt-2' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: ARM: dts: meson: add the efuse node ARM: dts: meson8b: enable gpio interrupt controller ARM: dts: meson8b: add support for booting the secondary CPU cores ARM: dts: meson8: add support for booting the secondary CPU cores
2017-10-30Merge tag 'at91-ab-4.15-dt' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux into next/dt Pull" ARM: at91: DT for 4.15" from Alexandre Belloni: - sama5d2 xplained: add charger and SD card power supply - sama5d27_som1_ek: many adjustments - at91sam9x25ek: add pwm0 and can1 * tag 'at91-ab-4.15-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: ARM: dts: at91: at91sam9x5ek: use DMA for USART0 ARM: dts: at91: at91sam9x25ek: add pwm0 ARM: dts: at91: at91sam9x25ek: add CAN1 interface ARM: dts: at91: sama5d2_xplained: remove pull-up on SD/MMC lines ARM: dts: at91: sama5d2_xplained: add pinmuxing for pwm0 ARM: dts: at91: sama5d2_xplained: set PB_USER as wakeup source ARM: dts: at91: sama5d27_som1_ek: remove pull-up on SD/MMC lines ARM: dts: at91: sama5d27_som1_ek: remove not connected CAN0 ARM: dts: at91: sama5d27_som1_ek: add pinmuxing for pwm0 ARM: dts: at91: sama5d27_som1_ek: add aliases for i2c ARM: dts: at91: sama5d27_som1_ek: set USER button as a wakeup source ARM: dts: at91: sama5d27_som1_ek: update serial aliases ARM: dts: at91: sama5d27_som1_ek: enable i2c2 ARM: dts: at91: sama5d27_som1_ek: add disabled status ARM: dts: at91: usb_a9g20: fix rtc node ARM: dts: at91: sama5d2 Xplained: Describe the SD card power supply ARM: dts: at91: sama5d2_xplained: Add charger node
2017-10-30Merge tag 'imx-dt-4.15' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/dt Pull "i.MX device tree updates for 4.15" from Shawn Guo: - New board support: i.MX51 ZII RDU1, i.MX53 GE Healthcare PPD, i.MX6 TX modules for MB7 from Ka-Ro Electronics, i.MX6 Wandboard revd1 variants, i.MX6 LWN DISPLAY5 board, Pistachio i.MX6Q board, i.MX6SX Vining-2000 board. - Use the 'vpcie-supply' property for PCIe device for boards imx6qdl-sabresd, imx6q-novena and imx6q-cm-fx6. - A series from Jagan Teki to update imx6qdl-icore board with audio, touch and CAN support. - Switch to nvmem for accessing OCOTP from tempmon for i.MX6SX and add tempmon support for i.MX6UL. - A bunch of patches from Lothar Waßmann updating Ka-Ro i.MX28, i.MX53 and i.MX6 TX modules. - Fix DTC warnings in i.MX device trees, dropping leading zeros from unit address, correcting display nodes notation and display port names, fixing nodes with unit name and no reg property. - Other random device updates for various board support. * tag 'imx-dt-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (63 commits) ARM: dts: imx53-tx53: fix interrupt flags ARM: dts: imx28-tx28: fix interrupt flags ARM: dts: display5: Device tree description of LWN's DISPLAY5 board ARM: dts: imx53-qsb-common: Fix 'led_gpio7_7@0' node with unit name and no reg property ARM: dts: imx53-m53evk: Fix 'led_gpio@0' node with unit name and no reg property ARM: dts: imx53: Fix 'usbphy@x' node with unit name and no reg property ARM: dts: imx51-ts4800: Fix 'port@0' node with unit name and no reg property ARM: dts: imx51-apf51dev: Fix 'backlight@bl1' node with unit name and no reg property ARM: dts: imx: add ZII RDU1 board ARM: dts: imx: add support for TX6 modules on MB7 baseboard ARM: dts: imx: add support for TX6QP ARM: dts: imx6-tx6: add a .dtsi file for the MB7 baseboard ARM: dts: imx6-tx6: move display configuration to .dtsi file ARM: dts: imx6-tx6: add support for I2C bus recovery ARM: dts: imx6-tx6: convert to using simple-audio-card ARM: dts: imx6-tx6: specify ethernet phy reset post-delay ARM: dts: imx6-tx6: improve ethernet related pinctrl setup ARM: dts: imx6-tx6: add trickle-charge config for DS1339 ARM: dts: imx6-tx6: remove obsolete ipu1 alias ARM: dts: imx6-tx6: remove obsolete eeti,egalax_ts ... [arnd: made sure we have no new leading zeroes in unit address during merge]
2017-10-30Merge tag 'uniphier-dt-v4.15' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier into next/dt Pull "UniPhier ARM SoC DT updates for v4.15" from Masahiro Yamada: - add thermal monitor and thermal zone nodes - fix W=2 warnings - add GPIO controller nodes and related properties - add resets properties * tag 'uniphier-dt-v4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier: ARM: dts: uniphier: add resets properties ARM: dts: uniphier: add GPIO hog definition ARM: dts: uniphier: route on-board device IRQ to GPIO controller ARM: dts: uniphier: add GPIO controller nodes ARM: dts: uniphier: fix W=2 build warnings ARM: dts: uniphier: add nodes of thermal monitor and thermal zone for PXs2
2017-10-30Merge tag 'amlogic-dt' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into next/dt Pull "Amlogic 32-bit platforms: DT updates for v4.15" - add SDIO MMC controller - reserved memory fixes - SoC info driver nodes - enable USB host controller * tag 'amlogic-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: ARM: dts: meson: add the SDIO MMC controller ARM: dts: meson8b: add reserved memory zone to fix silent freezes ARM: dts: meson: add SoC information nodes dt-bindings: Amlogic: add documentation for the SoC info register areas ARM: dts: meson: fixing USB support on Meson6, Meson8 and Meson8b ARM: dts: meson: enabling the USB Host controller on Odroid-C1/C1+ board
2017-10-30Merge tag 'keystone_dts_for_4.15' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone into next/dt Pull "ARM: Keystone DTS update for 4.15" from Santosh Shilimkar: - McASP support for K2G EVM - I2C support for K2G EVM - USB support for K2G EVM - SPI & SPI NOR flash support for K2G EVM - ECAP PWM support for K2G EVM * tag 'keystone_dts_for_4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone: ARM: dts: keystone-k2g-evm: add bindings for SPI NOR flash ARM: dts: keystone-k2g: Add SPI nodes ARM: dts: keystone-k2g-evm: Enable PWM ECAP0 ARM: dts: keystone-k2g: Add ECAP PWM DT nodes ARM: dts: k2g-evm: Enable USB 0 and 1 ARM: dts: k2g: Add USB instances ARM: dts: keystone-k2g-evm: Add I2C EEPROM DT entry ARM: dts: keystone-k2g: Add I2C nodes ARM: dts: keystone-k2g: Add McASP nodes
2017-10-30Merge tag 'arm-soc/for-4.15/devicetree' of ↵Arnd Bergmann
http://github.com/Broadcom/stblinux into next/dt Pull "Broadcom devicetree changes for 4.15" from Florian Fainelli: This pull request contains Broadcom ARM-based Device Tree changes for 4.15, please pull the following: - Eric adds support for the CLCD and PWM controller on Cygnus chis - Loic fixes the console path on the Raspberry Pi 3 (already submitted as fixes) and then proceeds with enabling the BCM43438 bluetooth chip on the Raspberry Pi 3 - Rafal specifies the USB ports on the Luxul XWR-1200 - Dan adds support for the Luxul ABR-4500 based on BCM47094, the Luxul XAP-810 and XAP-1440 both based on BCM53573 - Florian adds support for the Broadcom Hurricane 2 SoC by adding general machine binding, clock binding, SoC DTS include file and a DTS for the Ubiquiti Networks UniFi Switch 8 * tag 'arm-soc/for-4.15/devicetree' of http://github.com/Broadcom/stblinux: ARM: dts: Hurricane 2: Add basic support for Ubiquiti UniFi Switch 8 dt-bindings: Add Ubiquiti Networks vendor prefix ARM: dts: Add Broadcom Hurricane 2 DTS include file dt-bindings: Document Broadcom Hurricane 2 clocks dt-bindings: Add documentation for Broadcom Hurricane 2 SoCs ARM: dts: BCM53573: Add DT for Luxul XAP-1440 ARM: dts: BCM53573: Add DT for Luxul XAP-810 ARM: dts: BCM5301X: Add DT for Luxul ABR-4500 ARM: dts: BCM5301X: Add DT for Luxul XBR-4500 ARM: dts: BCM5301X: Specify USB ports for USB LED of Luxul XWR-1200 ARM: dts: bcm2837-rpi-3-b: Add bcm43438 serial slave ARM: dts: bcm283x: Fix console path on RPi3 ARM: dts: cygnus: Add the PWM node ARM: dts: cygnus: Add the CLCD controller
2017-10-30Merge tag 'tegra-for-4.15-arm-dt' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/dt Pull "ARM: tegra: Device tree changes for v4.15-rc1" from Thierry Reding: Adds support for the CEC controller found on Tegra124 and enables it on Tegra K1. * tag 'tegra-for-4.15-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: ARM: tegra: Enable CEC support on Jetson TK1 ARM: tegra: Add CEC support for Tegra124
2017-10-30Merge tag 'renesas-dt2-for-v4.15' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt Pull "Second Round of Renesas ARM Based SoC DT Updates for v4.15" from Simon Horman: * r8a77430 (RZ/G1M) SoC - Add XHCI support to SoC DT. Boards may enable this as appropriate * All Renesas ARM based SoCs - Add missing clocks for ARM CPU cores Geert Uytterhoeven says "This series improves DT hardware descriptions for Renesas arm32 SoCs by adding missing clocks properties to the device nodes corresponding to ARM CPU cores." * R-Car Gen 1 and 2, and RZ/G SoCs - Use R-Car Fallback compat strings for GPIO Simon Horman says "Use newly added R-Car GPIO Gen 1, 2 and 3 fallback compat strings in peace of now deprecated non-generation specific R-Car GPIO fallback compat string in the DT of Renesas ARM and arm64 based SoCs. As noted in the changelogs for the r8a777[89] changes, this introduces an incompatibility with pre-v4.14 kernels used with new DTBs. There is no run-time effect for other SoCs updated by this changeset." * r7s72100 (RZ/A1H) GR-Peach board - Add pin configuration subnode for ETHER pin group. This avoids relying on boot-loader configuration of these pins. - Enable ostm0 and ostm1 timers Jacopo Mondi says these are "to be used as clock source and clockevent source. The timers provides greater accuracy than the already enabled mtu2 one." - Correct leds node name indent - Enable MTU2 timer pulse unit Jacopo Mondi says "MTU2 multi-function/multi-channel timer/counter is not enabled for GR-Peach board. The timer is used as clock event source to schedule wake-ups, and without this enabled all sleeps not performed through busy waiting hang the board." * r8a7743 (RZ/G1M) iW-RainboW-G20M-Qseven SoM - Add USB function support * r8a7745 (RZ/G1E) iW-RainboW-G22D development platform - Add USB2.0 Host support * r8a7743 (RZ/G1M) iW-RainboW-G20D-Qseven development platform - Rework DT architecture and add DT for camera DB Fabrizio Castro says "Some of the serial interfaces are exposed on the camera daughter board. The camera daughter board can be connected to the carrier board by means of expansion connectors 1, 2 and 3. The carrier board may host an RZ/G1M or an RZ/G1N based SoM. While adding support for the serial interfaces on the camera daughter board we faced the dilemma of how to properly describe all of the possible HW configurations and how to maximize code reuse. The best option would be to use device tree overlays, however there is still some work to be done on that front before actually using them, therefore for the time being we decided to provide .dtsi files to describe the carrier board and the camera daughter board, and provide .dts files to describe the HW configurations we need to support." * r8a779[0-4] R-Car Gen2 SoCs - Use generic node name for VSP1 nodes Geert Uytterhoeven says "This patch series replaces the specific node names used for the VSP1 nodes by the preferred generic node names, cfr. commit 0e1bfb72b076b07d ("v4l: vsp1: Use generic node name")." * tag 'renesas-dt2-for-v4.15' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (42 commits) ARM: dts: r8a7743: Add xhci support to SoC dtsi ARM: dts: r7s72100: Add clock for CA9 CPU core dt-bindings: clk: r7s72100: Add missing I and G clocks ARM: dts: sh73a0: Add clocks for CA9 CPU cores ARM: dts: r8a7794: Add missing clock for secondary CA7 CPU core ARM: dts: r8a7793: Add missing clock for secondary CA15 CPU core ARM: dts: r8a7792: Add missing clock for secondary CA15 CPU core ARM: dts: r8a7791: Add missing clock for secondary CA15 CPU core ARM: dts: r8a7790: Add clocks for CA7 CPU cores ARM: dts: r8a7790: Add missing clocks for secondary CA15 CPU cores ARM: dts: r8a7779: Add clocks for CA9 CPU cores ARM: dts: r8a7778: Add clock for CA9 CPU core ARM: dts: r8a7743: Add missing clock for secondary CA15 CPU core ARM: dts: r8a73a4: Add clock for CA15 CPU0 core ARM: dts: r8a7794: Use R-Car GPIO Gen2 fallback compat string ARM: dts: r8a7793: Use R-Car GPIO Gen2 fallback compat string ARM: dts: r8a7792: Use R-Car GPIO Gen2 fallback compat string ARM: dts: r8a7791: Use R-Car GPIO Gen2 fallback compat string ARM: dts: r8a7790: Use R-Car GPIO Gen2 fallback compat string ARM: dts: r8a7743: Use R-Car GPIO Gen2 fallback compat string ...
generated by cgit (git 2.34.1) at 2024-05-04 13:17:31 +0000