| Age | Commit message (Collapse) | Author |
|---|
|
The property is "fsl,pins", not "fsl,pin". Wrong property means the pin
configuration was not applied. Fixes dtbs_check warnings:
imx6ull-seeed-npi-dev-board-emmc.dtb: pinctrl@20e0000: uart1grp: 'fsl,pins' is a required property
imx6ull-seeed-npi-dev-board-emmc.dtb: pinctrl@20e0000: uart1grp: 'fsl,pin' does not match any of the regexes: 'pinctrl-[0-9]+'
Cc: stable@vger.kernel.org
Fixes: e3b5697195c8 ("ARM: dts: imx6ull: add seeed studio NPi dev board")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Parthiban Nallathambi <parthiban@linumiz.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The property is "fsl,pins", not "fsl,pin". Wrong property means the pin
configuration was not applied. Fixes dtbs_check warnings:
imx6ul-geam.dtb: pinctrl@20e0000: tscgrp: 'fsl,pins' is a required property
imx6ul-geam.dtb: pinctrl@20e0000: tscgrp: 'fsl,pin' does not match any of the regexes: 'pinctrl-[0-9]+'
Cc: stable@vger.kernel.org
Fixes: a58e4e608bc8 ("ARM: dts: imx6ul-geam: Add Engicam IMX6UL GEA M6UL initial support")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
According to simple-bus.yaml, apbh and apbx are not valid bus names.
Rename them to apbh-bus and apbx-bus to fix the following dt-schema
warnings:
'apbh@80000000' does not match '^([a-z][a-z0-9\\-]+-bus|bus|localbus|soc|axi|ahb|apb)(@.+)?$'
'apbx@80040000' does not match '^([a-z][a-z0-9\\-]+-bus|bus|localbus|soc|axi|ahb|apb)(@.+)?$'
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Since the muxing is described already in imx6qdl-tqma6 can be reused
by this variant. No functional change.
Signed-off-by: Markus Niebel <Markus.Niebel@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Use national,lm75a to specify exact variant used. This should cause
no functional changes.
Signed-off-by: Markus Niebel <Markus.Niebel@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Use national,lm75a to specify exact variant used. This should cause
no functional changes.
While at it change node name to 'temperature-sensor@48' to
describe the function of the IC.
Signed-off-by: Markus Niebel <Markus.Niebel@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Move the pinmux entries to the variant where they are actual
used. No functional changes.
Signed-off-by: Markus Niebel <Markus.Niebel@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Bindings expect pin configuration nodes in pinctrl to match certain
naming and not be part of another fake node:
imx7d-sdb-sht11.dtb: pinctrl@30330000: 'imx7d-sdb' does not match any of the regexes: 'grp$', 'pinctrl-[0-9]+'
Drop the "imx7d-sdb" wrapping node and adjust the names to have "grp"
prefix. Diff looks big but this should have no functional impact.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Bindings expect pin configuration nodes in pinctrl to match certain
naming:
imx7s-colibri-eval-v3.dtb: pinctrl@30330000: 'lvdstx' does not match any of the regexes: 'grp$', 'pinctrl-[0-9]+'
imx7s-warp.dtb: pinctrl@30330000: 'usdhc3grp_100mhz', 'usdhc3grp_200mhz' do not match any of the regexes: 'grp$', 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
There is no "fsl,phy" property in pin controller pincfg nodes:
imx7d-zii-rmu2.dtb: pinctrl@302c0000: enet1phyinterruptgrp: 'fsl,pins' is a required property
imx7d-zii-rmu2.dtb: pinctrl@302c0000: enet1phyinterruptgrp: 'fsl,phy' does not match any of the regexes: 'pinctrl-[0-9]+'
Fixes: f496e6750083 ("ARM: dts: Add ZII support for ZII i.MX7 RMU2 board")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The merge of imx-spdif driver into fsl-asoc-card brought
new DT properties that can be used with the "fsl,imx-audio-spdif"
compatible:
* The "spdif-controller" property from imx-spdif is named "audio-cpu"
in fsl-asoc-card.
* fsl-asoc-card uses codecs explicitly declared in DT
with "audio-codec".
With an S/PDIF, codec drivers spdif_transmitter and
spdif_receiver should be used.
Driver imx-spdif used instead the dummy codec and a pair of
boolean properties, "spdif-in" and "spdif-out".
While backward compatibility is kept to support properties
"spdif-controller", "spdif-in" and "spdif-out", using new properties has
several benefits:
* "audio-cpu" and "audio-codec" are more generic names reflecting
that the fsl-asoc-card driver supports multiple hardware.
They are properties already used by devices using the
fsl-asoc-card driver.
They are also similar to properties of simple-card: "cpu" and "codec".
* "spdif-in" and "spdif-out" imply the use of the dummy codec in the
driver. However, there are already two codec drivers for the S/PDIF,
spdif_transmitter and spdif_receiver.
It is better to declare S/PDIF Tx and Rx devices in a DT, and then
reference them with "audio-codec" than using the dummy codec.
For those reasons, this commit updates in-tree DTs to use the new
properties:
* Rename "spdif-controller" property to "audio-cpu".
* Declare S/PDIF transmitter and/or receiver devices, and use them with
the "audio-codec" property instead of "spdif-out" and/or "spdif-in".
These modifications were tested only on an imx8mn-evk board.
Note that out-of-tree and old DTs are still supported.
Signed-off-by: Elinor Montmasson <elinor.montmasson@savoirfairelinux.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The regulator should not be placed under simple-bus.
Remove it from simple-bus to fix the following dt-schema warnings:
'regulators' does not match '^([a-z][a-z0-9\\-]+-bus|bus|localbus|soc|axi|ahb|apb)(@.+)?$'
regulators: #size-cells:0:0: 0 is not one of [1, 2]
regulators: regulator@0:reg:0: [0] is too short
regulators: 'ranges' is a required property
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
According to datasheet, Chapter 34. Clock Generator, section 34.2,
Embedded characteristics, source clock for RTT is the TD_SLCK, registered
with ID 1 by the slow clock controller driver. Fix RTT clock.
Fixes: 7540629e2fc7 ("ARM: dts: at91: add sama7g5 SoC DT and sama7g5-ek")
Link: https://lore.kernel.org/r/20240826165320.3068359-1-claudiu.beznea@tuxon.dev
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
|
|
There is no DAC connected to the SPI bus of the Elgin RV1108 R1 board.
There is a JG10309-01 LCD controlled via SPI though.
Properly describe it by adding the "elgin,jg10309-01" compatible
string.
Reported-by: Conor Dooley <conor.dooley@microchip.com>
Closes: https://lore.kernel.org/linux-arm-kernel/20240717-parrot-malt-83cc04bf6b36@spud/
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20240829113158.3324928-3-festevam@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Pins responsible for controlling these LEDs need to have tristate
control removed if we want them as GPIOs. This change aligns with
pinmux configuration of "dte" pin group in downstream kernel[1].
These LEDs had no function assigned on vendor kernel and there is no
label on the case, the only markings are on PCB which are part of node
names (ds1 marking is on power LED controlled by PMIC), so generic term
is assigned as the function.
1. https://github.com/compulab/trimslice-android-kernel/blob/upstream/arch/arm/mach-tegra/board-trimslice-pinmux.c#L45
Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Fixes issue when resuming after suspend made USB in peripheral
mode inaccessible.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Downstream kernel states that backlight has no actual enable GPIO
and uses fixed regulator.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Group GPIO keys into keys and switches.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Add MMC nodes configuration along with WIFI binding to ASUS TF701T
device-tree.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
With these changes sound works, only UCM configs are needed for
complete support.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Complete and adjust magnetometer, thermal sensor, motion tracker,
power and light sensors according to available sources.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Add serial node along with bluetooth node to ASUS TF701T device-tree.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Add HDMI nodes to ASUS TF701T device-tree.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Add missing parts of PMIC complex, extend PMC binding and add missing
fixed regulators. Additionally, refresh naming to better reflect
regulator purpose.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Add Video Decoder Engine node to ASUS TF701T device-tree.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Mimic original downstream board behavior to set up all pinmux at once.
Per-device pinmux is good but we have no complete board schematics
to allow such luxury.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes
i.MX fixes for 6.11:
- One imx8mp-beacon-kit change from Adam Ford to fix the broken WM8962
audio support
- One pinctrl property typo fix for imx8mm-phygate
- One layerscape fix from Krzysztof Kozlowski to get thermal nodes
correct name length
- A couple of imx93-tqma9352 fixes from Markus Niebel, one on CMA
alloc-ranges and the other on SD-Card cd-gpios typo
- One change from Michal Vokáč to fix imx6dl-yapp43 LED current to match
the HW design
- A couple of imx95 fixes from Peng Fan, one to correct a55 power
domains and the other to correct L3Cache cache-sets
- One tqma9352 watchdog reset fix from Sascha Hauer
- One imx93 change from Shenwei Wang to fix the default value for STMMAC
EQOS snps,clk-csr
* tag 'imx-fixes-6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: dts: imx8mm-phygate: fix typo pinctrcl-0
arm64: dts: imx95: correct L3Cache cache-sets
arm64: dts: imx95: correct a55 power-domains
arm64: dts: freescale: imx93-tqma9352-mba93xxla: fix typo
arm64: dts: freescale: imx93-tqma9352: fix CMA alloc-ranges
ARM: dts: imx6dl-yapp43: Increase LED current to match the yapp4 HW design
arm64: dts: imx93: update default value for snps,clk-csr
arm64: dts: freescale: tqma9352: Fix watchdog reset
arm64: dts: imx8mp-beacon-kit: Fix Stereo Audio on WM8962
arm64: dts: layerscape: fix thermal node names length
Link: https://lore.kernel.org/r/ZrtsTO1+jXhJ6GSM@dragon
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap into arm/fixes
OMAP fixes for v6.11-rc
- omap3-n900: fix accelerometer orientation
* tag 'omap-for-v6.11/fixes-signed' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap:
ARM: dts: omap3-n900: correct the accelerometer orientation
Link: https://lore.kernel.org/r/7h4j7eyhyh.fsf@baylibre.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Add nodes for the vpu and it's attached iommu which are both part of the
RK3128_PD_VIDEO powerdomain.
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Link: https://lore.kernel.org/r/20240523185633.71355-4-knaerzche@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Use national,lm75a to specify exact variant used. This should cause
no functional changes.
Signed-off-by: Markus Niebel <Markus.Niebel@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Enable IIO hwmon support for ADC1 and ADC2. All channels are
available on X23 (ADC2) and X24 (ADC1) of MBa7x.
Signed-off-by: Markus Niebel <Markus.Niebel@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
io_expander7
- P1-5: MCU_GPIO
- P1-6: MCU_RST_N
- P1-7: MCU_RECOVERY_N
io_expander8
- P1-5: SEC_MCU_GPIO
- P1-6: SEC_MCU_RST_N
- P1-7: SEC_MCU_RECOVERY_N
Signed-off-by: Potin Lai <potin.lai.pt@gmail.com>
Link: https://lore.kernel.org/r/20240823-catalina-ioexp-update-v1-2-4bfd8dad819c@gmail.com
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Add more IO expanders which are emulated by the PDB CPLD.
Signed-off-by: Potin Lai <potin.lai.pt@gmail.com>
Link: https://lore.kernel.org/r/20240823-catalina-ioexp-update-v1-1-4bfd8dad819c@gmail.com
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
The RTC and RTT peripherals use the timing domain slow clock (TD_SLCK),
sourced from the 32.768 kHz crystal oscillator or slow rc oscillator.
The previously used Monitoring domain slow clock (MD_SLCK) is sourced
from an internal RC oscillator which is most probably not precise enough
for real time clock purposes.
Fixes: 1e5f532c2737 ("ARM: dts: at91: sam9x60: add device tree for soc and board")
Fixes: 5f6b33f46346 ("ARM: dts: sam9x60: add rtt")
Signed-off-by: Alexander Dahl <ada@thorsis.com>
Link: https://lore.kernel.org/r/20240821055136.6858-1-ada@thorsis.com
[claudiu.beznea: removed () around the last commit description paragraph,
removed " in front of "timing domain slow clock", described that
TD_SLCK can also be sourced from slow rc oscillator]
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
|
|
The driver data specific to each pinctrl GPIO bank compatible nodes are not
the same and declaring additional compatible string as fallback has no
specific purpose, hence, removing the "atmel,at91sam9x5-gpio" compatible from
sam9x60 SoC DT.
Note: The at91 pinctrl driver uses "atmel,at91rm9200-gpio" compatible string
to find the number of active GPIO banks and identify the pinmux nodes.It
should used as a constant across all DT for GPIO node banks that uses PIO3
based pinctrl driver
Signed-off-by: Manikandan Muralidharan <manikandan.m@microchip.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20240814061315.112564-4-manikandan.m@microchip.com
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
|
|
The driver data specific to each pinctrl GPIO bank compatible nodes are not
the same and declaring additional compatible string as fallback has no
specific purpose, hence, removing the additional compatible string from the
pinctrl nodes in DT to comply with atmel,at91-pinctrl.txt documentation.
Signed-off-by: Manikandan Muralidharan <manikandan.m@microchip.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20240814061315.112564-3-manikandan.m@microchip.com
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
|
|
controller
The pinctrl subnodes that define the pin configuration of other devices
under PIO3 pinmux controller are not simple memory mapped nodes.Ergo,
change simple-bus to simple-mfd.
Signed-off-by: Manikandan Muralidharan <manikandan.m@microchip.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20240814061315.112564-2-manikandan.m@microchip.com
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
|
|
Remove pca9546 device from i2c bus 9.
Signed-off-by: Peter Yin <peteryin.openbmc@gmail.com>
Link: https://lore.kernel.org/r/20240801160136.1281291-12-peteryin.openbmc@gmail.com
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Revise spi-gpio node and property name and remove max-ngpios.
Signed-off-by: Peter Yin <peteryin.openbmc@gmail.com>
Link: https://lore.kernel.org/r/20240801160136.1281291-11-peteryin.openbmc@gmail.com
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Enable the mctp controller in i2c9.
Signed-off-by: Peter Yin <peteryin.openbmc@gmail.com>
Link: https://lore.kernel.org/r/20240801160136.1281291-10-peteryin.openbmc@gmail.com
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Add temperature device in i2c0 and i2c2.
Signed-off-by: Peter Yin <peteryin.openbmc@gmail.com>
Link: https://lore.kernel.org/r/20240801160136.1281291-9-peteryin.openbmc@gmail.com
[andrew: Fixed 'deivce' typo in commit message]
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Add Aegis fru device and gpio expander device in bus 11.
Signed-off-by: Peter Yin <peteryin.openbmc@gmail.com>
Link: https://lore.kernel.org/r/20240801160136.1281291-8-peteryin.openbmc@gmail.com
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Harma is single host, so remove multi-host property.
Signed-off-by: Peter Yin <peteryin.openbmc@gmail.com>
Link: https://lore.kernel.org/r/20240801160136.1281291-7-peteryin.openbmc@gmail.com
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Add HSC xdp710 device in i2c4.
Signed-off-by: Peter Yin <peteryin.openbmc@gmail.com>
Link: https://lore.kernel.org/r/20240801160136.1281291-6-peteryin.openbmc@gmail.com
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Add INA238 power monitor for Harma fan board.
Signed-off-by: Peter Yin <peteryin.openbmc@gmail.com>
Link: https://lore.kernel.org/r/20240801160136.1281291-5-peteryin.openbmc@gmail.com
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Add power-chassis-control and power-chassis-power for phosphor-power.
Signed-off-by: Peter Yin <peteryin.openbmc@gmail.com>
Link: https://lore.kernel.org/r/20240801160136.1281291-4-peteryin.openbmc@gmail.com
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Add isl69260, xdpe152c4 devices.
Signed-off-by: Peter Yin <peteryin.openbmc@gmail.com>
Link: https://lore.kernel.org/r/20240801160136.1281291-3-peteryin.openbmc@gmail.com
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Revise HSC chip name and address to match LTC4287.
Signed-off-by: Peter Yin <peteryin.openbmc@gmail.com>
Link: https://lore.kernel.org/r/20240801160136.1281291-2-peteryin.openbmc@gmail.com
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
These are not specified in the binding and produce warnings such as
the following:
arch/arm/boot/dts/aspeed/aspeed-g6.dtsi:254.27-262.5: Warning
(avoid_unnecessary_addr_size): /ahb/ethernet@1e670000: unnecessary
#address-cells/#size-cells without "ranges", "dma-ranges" or child
"reg" property
arch/arm/boot/dts/aspeed/aspeed-g6.dtsi:264.27-272.5: Warning
(avoid_unnecessary_addr_size): /ahb/ethernet@1e690000: unnecessary
#address-cells/#size-cells without "ranges", "dma-ranges" or child
"reg" property
arch/arm/boot/dts/aspeed/aspeed-ast2600-evb-a1.dtb: ethernet@1e660000:
Unevaluated properties are not allowed ('#address-cells', '#size-cells'
were unexpected)
Link: https://lore.kernel.org/r/20240802-dt-warnings-bmc-dts-cleanups-v1-7-1cb1378e5fcd@codeconstruct.com.au
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Squash warnings such as:
arch/arm/boot/dts/aspeed/aspeed-ast2600-evb.dtb: ftgmac@1e670000:
$nodename:0: 'ftgmac@1e670000' does not match '^ethernet(@.*)?$'
Link: https://lore.kernel.org/r/20240802-dt-warnings-bmc-dts-cleanups-v1-6-1cb1378e5fcd@codeconstruct.com.au
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
