summaryrefslogtreecommitdiff
path: root/arch/arm/boot
AgeCommit message (Collapse)Author
2024-07-05ARM: dts: stm32: OP-TEE async notif interrupt for ST STM32MP15x boardsEtienne Carriere
Define the GIC interrupt (PPI 15) to be used on ST STM32MP15x boards for OP-TEE async notif. Signed-off-by: Etienne Carriere <etienne.carriere@foss.st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2024-07-05ARM: dts: marvell: orion: align LED node name with bindingsKrzysztof Kozlowski
Bindings expect the LED node names to follow certain pattern, see dtbs_check warnings: orion5x-lswsgl.dtb: gpio-leds: led-alarm: Unevaluated properties are not allowed ('gpio' was unexpected) Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2024-07-05ARM: dts: marvell: orion5x-lswsgl: use 'gpios' property for LEDsKrzysztof Kozlowski
The 'gpio' property in GPIO LEDs is deprecated, as reported by dtbs_check: orion5x-lswsgl.dtb: gpio-leds: led-alarm: Unevaluated properties are not allowed ('gpio' was unexpected) Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2024-07-05ARM: dts: marvell: orion: drop incorrect address/size-cells in GPIO keysKrzysztof Kozlowski
Bindings do not allow address/size-cells in GPIO keys and the GPIO keys is not a bus, see dtbs_check warnings: orion5x-lacie-ethernet-disk-mini-v2.dtb: gpio-keys: '#address-cells', '#size-cells' do not match any of the regexes: '^(button|event|key|switch|... Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2024-07-05ARM: dts: marvell: orion: align GPIO keys node name with bindingsKrzysztof Kozlowski
Bindings expect the GPIO key node names to follow certain pattern, see dtbs_check warnings: orion5x-lacie-d2-network.dtb: gpio-keys: 'front_button', 'power_rocker_sw_off', 'power_rocker_sw_on' do not match any of the regexes: '^(button|event|key|switch| ... Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2024-07-05ARM: dts: marvell: kirkwood: align LED node name with bindingsKrzysztof Kozlowski
Bindings expect the LED node names to follow certain pattern, see dtbs_check warnings: kirkwood-ds409slim.dtb: gpio-leds-alarm-12: 'hdd1-green' does not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+' Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2024-07-05ARM: dts: marvell: kirkwood: drop incorrect address/size-cells in GPIO keysKrzysztof Kozlowski
Bindings do not allow address/size-cells in GPIO keys and the GPIO keys is not a bus, see dtbs_check warnings: kirkwood-openblocks_a7.dtb: gpio_keys: '#address-cells', '#size-cells' do not match any of the regexes: '^(button|event|key|switch|(button|event|key|switch)... Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2024-07-05ARM: dts: marvell: kirkwood: align GPIO keys node name with bindingsKrzysztof Kozlowski
Bindings expect the GPIO key node names to follow certain pattern, see dtbs_check warnings: kirkwood-laplug.dtb: gpio_keys: 'power' does not match any of the regexes: '^(button|event|key|switch|(button|event|key|switch)... Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2024-07-05ARM: dts: armada-{370-xp,375,38x,39x}: Drop #size-cells from mpic nodeMarek Behún
The marvell,mpic interrupt controller has no children nodes. Drop the Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2024-07-05ARM: dts: marvell: Add 7-segment LED display on x530Chris Packham
The Allied Telesis x530 products have a 7-segment LED display which is used for node identification when the devices are stacked. Represent this as a gpio-7-segment device. Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2024-07-05ARM: dts: stm32: Missing clocks for stm32f429's syscfg.Yanjun Yang
Without clock definition, SYSCFG will not work, EXTI interrupt for port other than GPIOA will fail to operate. Signed-off-by: Yanjun Yang <yangyj.ee@gmail.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2024-07-05ARM: dts: stm32: Add support for STM32MP13xx DHCOR SoM and DHSBC boardMarek Vasut
This stm32mp135f-dhcor-dhsbc board is a stack of DHCOR SoM based on STM32MP135F SoC (900MHz / crypto capabilities) populated on DHSBC carrier board. The SoM contains the following peripherals: - STPMIC (power delivery) - 512MB DDR3L memory - eMMC and SDIO WiFi module The DHSBC carrier board contains the following peripherals: - Two RGMII Ethernet ports - USB-A Host port, USB-C peripheral port, USB-C power supply plug - Expansion connector Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2024-07-05ARM: dts: stm32: Add pinmux nodes for DH electronics STM32MP13xx DHCOR SoM ↵Marek Vasut
and DHSBC board Add new pinmux nodes for DH electronics STM32MP13xx DHCOR SoM and DHSBC board. The following pinmux nodes are added: - ADC pins - ADC CC pins - ETH1 pins - ETH2 pins - I2C5 pins - MCAN1 pins - MCAN2 pins - PWM13 pins - PWM5 pins - QSPI pins - SAI1 pins - SDMMC2 D4..D7 pins - SPI2 pins - SPI3 pins - UART4 pins - UART7 pins - USART1 pins - USART2 pins Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2024-07-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR. Conflicts: drivers/net/phy/aquantia/aquantia.h 219343755eae ("net: phy: aquantia: add missing include guards") 61578f679378 ("net: phy: aquantia: add support for PHY LEDs") drivers/net/ethernet/wangxun/libwx/wx_hw.c bd07a9817846 ("net: txgbe: remove separate irq request for MSI and INTx") b501d261a5b3 ("net: txgbe: add FDIR ATR support") https://lore.kernel.org/all/20240703112936.483c1975@canb.auug.org.au/ include/linux/mlx5/mlx5_ifc.h 048a403648fc ("net/mlx5: IFC updates for changing max EQs") 99be56171fa9 ("net/mlx5e: SHAMPO, Re-enable HW-GRO") https://lore.kernel.org/all/20240701133951.6926b2e3@canb.auug.org.au/ Adjacent changes: drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c 4130c67cd123 ("wifi: iwlwifi: mvm: check vif for NULL/ERR_PTR before dereference") 3f3126515fbe ("wifi: iwlwifi: mvm: add mvm-specific guard") include/net/mac80211.h 816c6bec09ed ("wifi: mac80211: fix BSS_CHANGED_UNSOL_BCAST_PROBE_RESP") 5a009b42e041 ("wifi: mac80211: track changes in AP's TPE") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-07-04ARM: dts: rockchip: Drop ethernet-phy-ieee802.3-c22 from PHY compatible ↵Marek Vasut
string on edgeble-neu2 The rtl82xx DT bindings do not require ethernet-phy-ieee802.3-c22 as the fallback compatible string. There are fewer users of the Realtek PHY compatible string with fallback compatible string than there are users without fallback compatible string, so drop the fallback compatible string from the few remaining users: $ git grep -ho ethernet-phy-id001c....... | sort | uniq -c 1 ethernet-phy-id001c.c816", 2 ethernet-phy-id001c.c915", 2 ethernet-phy-id001c.c915"; 5 ethernet-phy-id001c.c916", 13 ethernet-phy-id001c.c916"; Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202406290316.YvZdvLxu-lkp@intel.com/ Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20240630034910.173552-1-marex@denx.de Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2024-07-02ARM: dts: qcom: qcom-msm8226-samsung-ms013g: Add initial device treeRaymond Hackley
Samsung Galaxy Grand 2 is a phone based on MSM8226. It's similar to the other Samsung devices based on MSM8226 with only a few minor differences. The device trees contain initial support with: - GPIO keys - Regulator haptic - SDHCI (internal and external storage) - UART (on USB connector via the TI TSU6721 MUIC) - Regulators - Touchscreen - Accelerometer Signed-off-by: Raymond Hackley <raymondhackley@protonmail.com> Reviewed-by: Luca Weiss <luca@lucaweiss.eu> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20240630132859.2885-3-raymondhackley@protonmail.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-07-02ARM: 9407/1: Add support for STACKLEAK gcc pluginJinjie Ruan
Add the STACKLEAK gcc plugin to arm32 by adding the helper used by stackleak common code: on_thread_stack(). It initialize the stack with the poison value before returning from system calls which improves the kernel security. Additionally, this disables the plugin in EFI stub code and decompress code, which are out of scope for the protection. Before the test on Qemu versatilepb board: # echo STACKLEAK_ERASING > /sys/kernel/debug/provoke-crash/DIRECT lkdtm: Performing direct entry STACKLEAK_ERASING lkdtm: XFAIL: stackleak is not supported on this arch (HAVE_ARCH_STACKLEAK=n) After: # echo STACKLEAK_ERASING > /sys/kernel/debug/provoke-crash/DIRECT lkdtm: Performing direct entry STACKLEAK_ERASING lkdtm: stackleak stack usage: high offset: 80 bytes current: 280 bytes lowest: 696 bytes tracked: 696 bytes untracked: 192 bytes poisoned: 7220 bytes low offset: 4 bytes lkdtm: OK: the rest of the thread stack is properly erased Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> Acked-by: Ard Biesheuvel <ardb@kernel.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
2024-07-01ARM: dts: qcom: apq8064: drop incorrect ranges from QFPROMKrzysztof Kozlowski
There is no direct mapping between QFPROM children and parent/SoC MMIO bus, so 'ranges' property is not correct. Pointed by dtbs_check: qcom-apq8064-cm-qs600.dtb: efuse@700000: Unevaluated properties are not allowed ('ranges' was unexpected) Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202406292139.yqPYyUfi-lkp@intel.com/ Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20240701062253.18149-1-krzysztof.kozlowski@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-07-01arm/arm64: dts: arm: Use generic clock and regulator nodenamesRob Herring (Arm)
With the recent defining of preferred naming for fixed clock and regulator nodes, convert the Arm Ltd. boards to use the preferred names. In the cases which had a unit-address, warnings about missing "reg" property are fixed. Signed-off-by: Rob Herring (Arm) <robh@kernel.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Sudeep Holla <sudeep.holla@arm.com> Link: https://lore.kernel.org/20240528191536.1444649-2-robh@kernel.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20240630-arm-dts-fixes-2-v1-1-a32ba57e5b1d@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-07-01ARM: dts: turris-omnia: Add GPIO key node for front buttonMarek Behún
Now that we have the MCU device-tree node, which acts as a GPIO controller, add GPIO key node for the front button. Signed-off-by: Marek Behún <kabel@kernel.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Andy Shevchenko <andy@kernel.org> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20240701113010.16447-9-kabel@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-07-01ARM: dts: turris-omnia: Add MCU system-controller nodeMarek Behún
Turris Omnia's MCU provides various features that can be configured over I2C at address 0x2a. Add device-tree node. This does not carry a Fixes tag - we do not want this to get backported to stable kernels for the following reason: U-Boot since v2022.10 inserts a phy-reset-gpio property into the WAN ethernet node pointing to the MCU node if it finds the MCU node with a cznic,turris-omnia-mcu compatible. Thus if this change got backported to a stable kernel, the WAN interface driver would defer probe indefinitely (since it would wait for the turris-omnia-mcu driver which would not be present). Signed-off-by: Marek Behún <kabel@kernel.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Andy Shevchenko <andy@kernel.org> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20240701113010.16447-8-kabel@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-07-01Merge tag 'renesas-dts-for-v6.11-tag2-v2' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt * tag 'renesas-dts-for-v6.11-tag2-v2' of https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: arm64: dts: renesas: r8a779h0: R-Car Sound support arm64: dts: renesas: r8a779g0: Tidy up sound DT settings arm64: dts: renesas: Add interrupt-names to arch timer nodes ARM: dts: renesas: Add interrupt-names to arch timer nodes arm64: dts: renesas: r9a08g045: Add missing hypervisor virtual timer IRQ arm64: dts: renesas: r9a07g054: Add missing hypervisor virtual timer IRQ arm64: dts: renesas: r9a07g044: Add missing hypervisor virtual timer IRQ arm64: dts: renesas: r9a07g043u: Add missing hypervisor virtual timer IRQ arm64: dts: renesas: r8a779g0: Add missing hypervisor virtual timer IRQ arm64: dts: renesas: r8a779f0: Add missing hypervisor virtual timer IRQ arm64: dts: renesas: r8a779a0: Add missing hypervisor virtual timer IRQ arm64: dts: renesas: r8a779h0: Drop "opp-shared" from opp-table-0 Link: https://lore.kernel.org/r/cover.1719837594.git.geert+renesas@glider.be Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-07-01Merge tag 'v6.10-rockchip-dtsfixes1' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/fixes Apart from the regular dts fixes for wrong addresses, missing or wrong properties, this reverts the previous move away from cd-gpios to the mmc-controller's internal card-detect. With this change applied, it was reported that boards could not detect card anymore, so this go reverted of course. * tag 'v6.10-rockchip-dtsfixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: arm64: dts: rockchip: Add sound-dai-cells for RK3368 arm64: dts: rockchip: Fix the i2c address of es8316 on Cool Pi 4B arm64: dts: rockchip: fix PMIC interrupt pin on ROCK Pi E arm64: dts: rockchip: make poweroff(8) work on Radxa ROCK 5A Revert "arm64: dts: rockchip: remove redundant cd-gpios from rk3588 sdmmc nodes" ARM: dts: rockchip: rk3066a: add #sound-dai-cells to hdmi node arm64: dts: rockchip: Fix the value of `dlg,jack-det-rate` mismatch on rk3399-gru arm64: dts: rockchip: set correct pwm0 pinctrl on rk3588-tiger arm64: dts: rockchip: Rename LED related pinctrl nodes on rk3308-rock-pi-s arm64: dts: rockchip: Fix SD NAND and eMMC init on rk3308-rock-pi-s arm64: dts: rockchip: Fix rk3308 codec@ff560000 reset-names arm64: dts: rockchip: Fix the DCDC_REG2 minimum voltage on Quartz64 Model B Link: https://lore.kernel.org/r/10237789.nnTZe4vzsl@diego Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-07-01ARM: dts: renesas: Add interrupt-names to arch timer nodesGeert Uytterhoeven
Add interrupt-names properties to device nodes that represent ARM architected timers for clarity. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/b964e2f916cc23b6272e158c7b24597c971a82a5.1718890849.git.geert+renesas@glider.be
2024-06-28Merge tag 'v6.11-rockchip-dts32-1' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt More attention for the rk3128 soc (dsi, i2c, spdif, sfc), hdmi-sound for a rk3066a board and some minor cleanups. * tag 'v6.11-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: ARM: dts: rockchip: add #sound-dai-cells to hdmi node on rk3128 ARM: dts: rockchip: add #sound-dai-cells to hdmi node no rk3036 ARM: dts: rockchip: enable hdmi_sound and i2s0 for mk808 hdmi ARM: dts: rockchip: Add SFC for RK3128 ARM: dts: rockchip: add hdmi-sound node to rk3066a ARM: dts: rockchip: Add spdif node for RK3128 ARM: dts: rockchip: Add i2s nodes for RK3128 ARM: dts: rockchip: Add DSI for RK3128 ARM: dts: rockchip: Add D-PHY for RK3128 dt-bindings: clock: rk3128: Add PCLK_MIPIPHY Link: https://lore.kernel.org/r/2187283.irdbgypaU6@diego Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-06-28Merge tag 'mtk-dts32-for-v6.11' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux into soc/dt MediaTek ARM32 DTS updates for v6.11 This adds a single commit that cleans up the drive-strength value assignment on all devicetrees using the deprecated MTK_DRIVE_(x)mA definition. * tag 'mtk-dts32-for-v6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux: arm: dts: mediatek: Declare drive-strength numerically Link: https://lore.kernel.org/r/20240628093801.126013-2-angelogioacchino.delregno@collabora.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-06-28Merge tag 'sti-dt-for-v6.11-round1' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/pchotard/sti into soc/dt STi DT for v6.11 : _ Add #thermal-sensor-cells property on stih410.dtsi and stih418.dtsi _ Add thermal-zones support on stih418 _
2024-06-28arm: dts: arm: Drop redundant fixed-factor clocksRob Herring
There's not much reason to have multiple fixed-factor-clock instances which are all the same factor and clock input. Drop the nodes, but keep the labels to minimize the changes and keep some distinction of the different clocks. Signed-off-by: Rob Herring (Arm) <robh@kernel.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/20240528191536.1444649-1-robh@kernel.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20240627-arm-dts-fixes-v1-1-40a2cb7d344b@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-06-28ARM: dts: armada-{370-xp,375,38x,39x}: Drop #size-cells from mpic nodeMarek Behún
The marvell,mpic interrupt controller has no children nodes. Drop the Signed-off-by: Marek Behún <kabel@kernel.org> Link: https://lore.kernel.org/r/20240624145355.8034-2-kabel@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-06-28ARM: dts: sti: add thermal-zones support on stih418Raphael Gallais-Pou
Add a 'thermal-zones' node for stih418. A thermal-zone needs three components: - thermal sensors, described in an earlier commit[1] - cooling devices, specified for each CPU - a thermal zone, describing the overall behavior. The thermal zone needs references to both CPUs and thermal sensors, which phandle are also added. The thermal management will then be achieved on CPUs using the cpufreq framework. [1] https://lore.kernel.org/lkml/20240320-thermal-v3-2-700296694c4a@gmail.com/ Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Signed-off-by: Raphael Gallais-Pou <rgallaispou@gmail.com> Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
2024-06-28ARM: dts: st: add thermal property on stih410.dtsi and stih418.dtsiRaphael Gallais-Pou
"#thermal-sensor-cells" is required and missing in thermal nodes. Add it. Signed-off-by: Raphael Gallais-Pou <rgallaispou@gmail.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
2024-06-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR. No conflicts. Adjacent changes: e3f02f32a050 ("ionic: fix kernel panic due to multi-buffer handling") d9c04209990b ("ionic: Mark error paths in the data path as unlikely") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-06-27ARM: dts: rockchip: add #sound-dai-cells to hdmi node on rk3128Johan Jonker
'#sound-dai-cells' is required to properly interpret the list of DAI specified in the 'sound-dai' property, so add them to the 'hdmi' node for 'rk3128.dtsi'. Signed-off-by: Johan Jonker <jbx6244@gmail.com> Link: https://lore.kernel.org/r/9d0fabb0-70b0-4b4b-ac7c-389b1c7afe20@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2024-06-27ARM: dts: rockchip: add #sound-dai-cells to hdmi node no rk3036Johan Jonker
'#sound-dai-cells' is required to properly interpret the list of DAI specified in the 'sound-dai' property, so add them to the 'hdmi' node for 'rk3036.dtsi'. Signed-off-by: Johan Jonker <jbx6244@gmail.com> Link: https://lore.kernel.org/r/55d302e5-c018-4b93-84c1-8cf75162e939@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2024-06-27Merge tag 'renesas-dts-for-v6.11-tag1' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt Renesas DTS updates for v6.11 - Add support for the second and third Ethernet interfaces on the White Hawk development board, - Add support for the second Ethernet interface on the RZ/N1 SoC, - Add I2C EEPROM support for the Condor-I development board, - Add video capture support for the R-Car V4M SoC, - Miscellaneous fixes and improvements. * tag 'renesas-dts-for-v6.11-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: arm64: dts: renesas: r8a779h0: Add video capture nodes arm64: dts: renesas: r9a08g045: Update fallback string for SDHI nodes arm64: dts: renesas: rzg2l: Update fallback string for SDHI nodes arm64: dts: renesas: r9a09g011: Update fallback string for SDHI nodes arm64: dts: renesas: s4sk: Add aliases for I2C buses arm64: dts: renesas: spider-cpu: Add aliases for I2C buses arm64: dts: renesas: white-hawk-cpu: Add aliases for I2C buses arm64: dts: renesas: condor-i: Add I2C EEPROM arm64: dts: renesas: gray-hawk-single: Add aliases for I2C buses ARM: dts: renesas: r9a06g032: Describe GMAC1 arm64: dts: renesas: white-hawk: ethernet: Describe AVB1 and AVB2 arm64: dts: renesas: r8a779g0: Use MDIO node for all AVB devices Link: https://lore.kernel.org/r/cover.1718355312.git.geert+renesas@glider.be Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-06-27ARM: dts: imx6qdl-kontron-samx6i: add actual device treesMichael Walle
For now, there wasn't any in-tree users of the dtsi files for the Kontron SMARC-sAMX6i board. Let's add device trees, for this board on a Kontron SMARC Eval 2.0 Carrier. Signed-off-by: Michael Walle <mwalle@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-06-27ARM: dts: imx6qdl-kontron-samx6i: remove wake-up-gpio propertyMichael Walle
Remove the "wake-up-gpio" property within the PCIe controller node. There is no such property, thus just remove it. This will also make the schema validation happy. Signed-off-by: Michael Walle <mwalle@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-06-27ARM: dts: imx6qdl-kontron-samx6i: fix PCIe reset polarityMichael Walle
The PCIe reset line is active low. Fix it. Fixes: 2a51f9dae13d ("ARM: dts: imx6qdl-kontron-samx6i: Add iMX6-based Kontron SMARC-sAMX6i module") Signed-off-by: Michael Walle <mwalle@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-06-27ARM: dts: imx6qdl-kontron-samx6i: fix node namesMichael Walle
Rename the nodes according to the schema. In particular, rename the bit bang I2C controller to "i2c-N" and the mux nodes of the audmux to "mux-*". While at it, fix the typo "adu", which should have been "aud". Signed-off-by: Michael Walle <mwalle@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-06-27ARM: dts: imx6qdl-kontron-samx6i: add SDIO_PWR_EN supportMichael Walle
The module can enable/disable the SD card power supply and has it's dedicated pin SDIO_PWR_EN for that reason. This is esp. useful to be able to reset the SD card if it was in an UHS mode. Signed-off-by: Michael Walle <mwalle@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-06-27ARM: dts: imx6qdl-kontron-samx6i: always enable eMMCMichael Walle
There are no variants of this module without an eMMC. Signed-off-by: Michael Walle <mwalle@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-06-27ARM: dts: imx6qdl-kontron-samx6i: fix product nameMichael Walle
The correct name of the product is "Kontron SMARC-sAMX6i". See also https://www.kontron.com/en/products/smarc-samx6i/p89810 Signed-off-by: Michael Walle <mwalle@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-06-27ARM: dts: imx6qdl-kontron-samx6i: fix SPI0 chip selectsMichael Walle
There is a comment in the imx6q variant dtsi claiming that these modules will have one more chip select than the imx6dl variant. This is wrong. Ordinary GPIOs are used for chip selects and both variants of the module share the very same PCB and both have this GPIO routed to the SPI0_CS1# pin of the SMARC connector. Fix it by moving the third chip select description to the common dtsi. Fixes: 2125212785c9 ("ARM: dts: imx6qdl-kontron-samx6i: add Kontron SMARC SoM Support") Signed-off-by: Michael Walle <mwalle@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-06-27ARM: dts: imx6qdl-kontron-samx6i: cleanup the PMIC nodeMichael Walle
Remove the comment, remove the unused phandle name for the VGEN5 output. VGEN5 is not used at all. Signed-off-by: Michael Walle <mwalle@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-06-27ARM: dts: imx6qdl-kontron-samx6i: fix board resetMichael Walle
On i.MX6 the board is reset by the watchdog. But in turn to do a complete board reset, we have to assert the WDOG_B output which is routed also to the CPLD which then do a complete power-cycle of the board. Fixes: 2125212785c9 ("ARM: dts: imx6qdl-kontron-samx6i: add Kontron SMARC SoM Support") Signed-off-by: Michael Walle <mwalle@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-06-27ARM: dts: imx6qdl-kontron-samx6i: fix PHY resetMichael Walle
The PHY reset line is connected to both the SoC (GPIO1_25) and the CPLD. We must not use the GPIO1_25 as it will drive against the output buffer of the CPLD. Instead there is another GPIO (GPIO2_01), an input to the CPLD, which will tell the CPLD to assert the PHY reset line. Fixes: 2a51f9dae13d ("ARM: dts: imx6qdl-kontron-samx6i: Add iMX6-based Kontron SMARC-sAMX6i module") Fixes: 5694eed98cca ("ARM: dts: imx6qdl-kontron-samx6i: move phy reset into phy-node") Signed-off-by: Michael Walle <mwalle@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-06-27ARM: dts: imx6qdl-kontron-samx6i: fix phy-modeMichael Walle
The i.MX6 cannot add any RGMII delays. The PHY has to add both the RX and TX delays on the RGMII interface. Fix the interface mode. While at it, use the new phy-connection-type property name. Fixes: 5694eed98cca ("ARM: dts: imx6qdl-kontron-samx6i: move phy reset into phy-node") Signed-off-by: Michael Walle <mwalle@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-06-27ARM: dts: nxp: imx6: convert NVMEM content to layout syntaxRafał Miłecki
Use cleaner (and non-deprecated) bindings syntax. See commit bd912c991d2e ("dt-bindings: nvmem: layouts: add fixed-layout") for details. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-06-26ARM: dts: omap am5729-beagleboneai: drop unneeded ti,enable-id-detectionKrzysztof Kozlowski
There is a ti,enable-id-detection property in the Extcon Palmas (extcon-palmas), but not in the Extcon USB GPIO binding and driver. Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202406152004.F2fNnorG-lkp@intel.com/ Link: https://lore.kernel.org/r/20240615174904.39012-1-krzysztof.kozlowski@linaro.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2024-06-26ARM: dts: ti: align panel timings node name with dtschemaKrzysztof Kozlowski
DT schema expects panel timings node to follow certain pattern, dtbs_check warnings: am335x-pdu001.dtb: display-timings: '240x320p16' does not match any of the regexes: '^timing', 'pinctrl-[0-9]+' Linux drivers do not care about node name, so this should not have effect on Linux. Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> # For DaVinci Link: https://lore.kernel.org/r/20240509104813.216655-1-krzysztof.kozlowski@linaro.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
generated by cgit (git 2.34.1) at 2025-09-13 13:26:27 +0000