| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt
Small Sonoff iHost improvements (wifi and mmc aliases)
* tag 'v6.9-rockchip-dts32-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
ARM: dts: rockchip: Wifi improvements for Sonoff iHost
ARM: dts: rockchip: mmc aliases for Sonoff iHost
Link: https://lore.kernel.org/r/3258282.tdWV9SEqCh@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu into soc/dt
mvebu dt for 6.9 (part 1)
a38x: improve solidrun armada 388 clearfog GTR device support:
Initial device-tree merge for Clearfog GTR devices had issues causing
problems with sfp connectors. The fixes are:
- Converted armada-38x dt-bindings to yaml and replaced invalid
compatibles.
- Added pinctrl nodes for all referenced gpios and removed invalid io
from first sfp connector.
- Added descriptions for secondary sfp connector and updated labels
of dsa switch ports.
* tag 'mvebu-dt-6.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu:
arm: dts: marvell: clearfog-gtr-l8: align port numbers with enclosure
arm: dts: marvell: clearfog-gtr-l8: add support for second sfp connector
arm: dts: marvell: clearfog-gtr: add missing pinctrl for all used gpios
arm: dts: marvell: clearfog-gtr: sort pinctrl nodes alphabetically
arm: dts: marvell: clearfog-gtr: add board-specific compatible strings
arm: dts: marvell: clearfog: add pro variant compatible in legacy dts
dt-bindings: marvell: a38x: add solidrun armada 385 clearfog gtr boards
dt-bindings: marvell: a38x: add kobol helios-4 board
dt-bindings: marvell: a38x: add solidrun armada 388 clearfog boards
dt-bindings: marvell: a38x: convert soc compatibles to yaml
Link: https://lore.kernel.org/r/87cysehr9k.fsf@BL-laptop
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into soc/dt
STM32 DT for v6.9, round 1
Highlights:
----------
- MCU:
- Add DSI support on stm32f769.
- Add display support on stm32f769-disco.
- Add stm32f769-disco-mb1166-reva09 board support which belongs to
the novatek NT35510 panel.
- MPU:
- STM32MP13:
- Add CRC support an enable it on stm32mp135f-dk.
- Enable CRYP on stm32mp135f-dk.
- STMP32MP15:
- Fix DSI peripheral clock: use bus clock instead of kernel clock
for pclk.
- LXA: driver powerboard lines as open drain.
- LXA: reduce RGMII drive strenght to reduce EMI emmissions.
- STM32MP25:
- Add video encoder / video decoder support.
* tag 'stm32-dt-for-v6.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32:
arm64: dts: st: add video encoder support to stm32mp255
arm64: dts: st: add video decoder support to stm32mp255
ARM: dts: stm32: enable crypto accelerator on stm32mp135f-dk
ARM: dts: stm32: enable CRC on stm32mp135f-dk
ARM: dts: stm32: add CRC on stm32mp131
ARM: dts: add stm32f769-disco-mb1166-reva09
ARM: dts: stm32: add display support on stm32f769-disco
ARM: dts: stm32: rename mmc_vcard to vcc-3v3 on stm32f769-disco
ARM: dts: stm32: add DSI support on stm32f769
dt-bindings: mfd: stm32f7: Add binding definition for DSI
dt-bindings: nt35510: document 'port' property
ARM: dts: stm32: lxa-tac: reduce RGMII interface drive strength
ARM: dts: stm32: fix DSI peripheral clock on stm32mp15 boards
ARM: dts: stm32: lxa-tac: drive powerboard lines as open-drain
Link: https://lore.kernel.org/r/a7ae1058-e24d-4a6b-900f-401f0e3ae17c@foss.st.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux into soc/dt
Amlogic ARM mach-meson changes for v6.9:
- bus name & node compatible DT fixups for bindings check
* tag 'amlogic-arm-dt-for-v6.9' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux:
ARM: dts: meson8b: fix &hwrng node compatible string
ARM: dts: meson8: fix &hwrng node compatible string
ARM: dts: meson: fix bus node names
Link: https://lore.kernel.org/r/b9c60991-65b3-4c80-bf43-b3bb95bea9e4@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into soc/dt
Devicetree changes for omaps for v6.9 merge window
Few device tree warning fixes, updates to use https links, and
add system-power-controller property for omap4-panda and
omap4-epson-embt2ws.
* tag 'omap-for-v6.9/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: omap4-panda-common: Enable powering off the device
ARM: dts: omap-embt2ws: system-power-controller for bt200
ARM: dts: omap: Switch over to https:// url
ARM: dts: ti: omap: add missing abb_{mpu,ivahd,dspeve,gpu} unit addresses for dra7 SoC
ARM: dts: ti: omap: add missing sys_32k_ck unit address for dra7 SoC
ARM: dts: ti: omap: add missing phy_gmii_sel unit address for dra7 SoC
Link: https://lore.kernel.org/r/pull-1709102762-376748@atomide.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Clearfog GTR has an official enclosure with labels for all interfaces.
The "lan" ports on the 8-port switch in device-tree were numbered in
reverse wrt. enclosure.
Update all device-tree labels to match.
Signed-off-by: Josua Mayer <josua@solid-run.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
|
|
Clearfog GTR L8 has an extra SFP connector on the managed switch port 9.
Add descriptions for both entities along with pinctrl.
Signed-off-by: Josua Mayer <josua@solid-run.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into soc/dt
Microchip AT91 device tree updates for v6.9
It contains:
- use DMA for DBGU of at91sam9x5ek.dtsi and USART3 of
at91sam9g25-gardena-smart-gateway.dts
- the new SAMA7G54 Curiosity board
- cleanups
* tag 'at91-dt-6.9' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
ARM: dts: microchip: sama7g5: add sama7g5 compatible
ARM: dts: microchip: sam9x60: align dmas to the opening '<'
ARM: dts: microchip: sama7g5: align dmas to the opening '<'
ARM: dts: microchip: sama7g54_curiosity: Add initial device tree of the board
ARM: dts: microchip: sama7g5: Add flexcom 10 node
dt-bindings: ARM: at91: Document Microchip SAMA7G54 Curiosity
ARM: dts: microchip: gardena-smart-gateway: Use DMA for USART3
ARM: dts: microchip: at91sam9x5ek: Use DMA for DBGU serial port
Link: https://lore.kernel.org/r/20240226183635.1964704-1-claudiu.beznea@tuxon.dev
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into soc/dt
Add PowerVR Series5 SGX GPUs for the TI SoCs
With the Imagination Rogue GPU binding added, let's also add the devicetree
binding for earlier SGX GPUs. Let's also patch the TI SoCs for the related
SGX GPU nodes.
Based on the mailing list discussions, the conclusion was that we need two
separate device tree bindings, one for Rogue and upcoming GPUS, and one for
the older SGX GPUs.
For merging the changes, I applied the binding changes together with the
TI SoC related changes into a branch leaving out the sun6i and mips changes
as suggested by Rob.
These changes are mostly 32-bit SoCs, but also contains one arm64 change.
It does not cause any merge conflicts.
* tag 'sgx-for-v6.9-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
arm64: dts: ti: k3-am654-main: Add device tree entry for SGX GPU
ARM: dts: DRA7xx: Add device tree entry for SGX GPU
ARM: dts: AM437x: Add device tree entry for SGX GPU
ARM: dts: AM33xx: Add device tree entry for SGX GPU
ARM: dts: omap5: Add device tree entry for SGX GPU
ARM: dts: omap4: Add device tree entry for SGX GPU
ARM: dts: omap3: Add device tree entry for SGX GPU
dt-bindings: gpu: Add PowerVR Series5 SGX GPUs
dt-bindings: gpu: Rename img,powervr to img,powervr-rogue
Link: https://lore.kernel.org/r/pull-1708943489-872615@atomide.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt
i.MX arm64 device tree for 6.9:
- New board support: Apalis eval v1.2 carrier board, Variscite
VAR-SOM-MX93, phyBOARD-Segin-i.MX93.
- A series from Adam Ford to enable bluetooth, configure multiple queues
on eqos, remove unnecessary clock configuration for i.MX8 Beacon boards.
- Several changesets from Alexander Stein to add i.MX8DXP support, enable
audio and GPU for i.MX8QXP, re-parent MEDIA_MIPI_PHY1_REF clock for
i.MX8MP, and improve MBA8xx board description.
- A few dt-schema fixes from Fabio Estevam for i.MX8MM and i.MX93 devices.
- A bunch of changes from Frank Li to improve i.MX8QM and i.MX8DXL
support, correcting edma3 power-domains and interrupt numbers, adding
I2C, FlexCAN and SMMU devices, etc.
- A series from Frieder Schrempf to improve imx8mm-kontron board
descriptions, disabling pulls, fixing up RTC device, adding EEPROM,
and refactoring OSM-S module, etc.
- A set of Data Modul i.MX8M Plus eDM SBC improvements from Marek Vasut.
- A series from Shengjiu Wang to add PDM micphone and SPDIF sound card
support for imx8mm-evk board.
- A series of imx8mm-venice boards improvement from Tim Harvey to add
TPM device, fix USB OTG VBUS etc.
- Other small and random improvements on various boards.
* tag 'imx-dt64-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (77 commits)
arm64: dts: imx8mm-kontron-bl-osm-s: Fix Ethernet PHY compatible
arm64: dts: imx8-apalis-v1.1: Remove reset-names from ethernet-phy
arm64: dts: imx8mp-evk: Fix hdmi@3d node
arm64: dts: imx93-var-som: Remove phy-supply from eqos
arm64: dts: imx8mp-phyboard-pollux: Disable pull-up for CD GPIO
arm64: dts: imx8mp-phyboard-pollux: Reduce drive strength for eqos tx lines
arm64: dts: imx8mp-phyboard-pollux: Set debug uart muxing to 0x140
arm64: dts: imx8mp-phyboard-pollux: Add and update rtc devicetree node
arm64: dts: imx8mm-evk: Add spdif sound card support
arm64: dts: mba8xx: Add missing #interrupt-cells
arm64: dts: imx8mp: Set SPI NOR to max 40 MHz on Data Modul i.MX8M Plus eDM SBC
arm64: dts: imx8mn: tqma8mqnl-mba8mx: Add USB DR overlay
arm64: dts: imx8mq: tqma8mq-mba8mx: Add missing USB vbus supply
arm64: dts: freescale: imx8mm/imx8mq: mba8mx: Use PCIe clock generator
arm64: dts: imx8mn-beacon: Remove unnecessary clock configuration
arm64: dts: imx8mn: Slow default video_pll clock rate
arm64: dts: imx8mp-beacon: Configure multiple queues on eqos
arm64: dts: imx8mp-beacon: Enable Bluetooth
arm64: dts: freescale: minor whitespace cleanup
arm64: dts: lx2160a: Fix DTS for full PL011 UART
...
Link: https://lore.kernel.org/r/20240226034147.233993-4-shawnguo2@yeah.net
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt
i.MX ARM device tree for 6.9:
- New board support: Sielaff i.MX6 Solo, Apalis Evaluation Board v1.2.
- A bunch of i.MX7 TQMA7/MBA7 updates from Alexander Stein that add
various devices, improve hardware descriptions and fix dt-schema
warnings, etc.
- Correct touchscreen rotation for imx6sl-tolino-shine2hd board.
- An imx53-qsb update from Dmitry Baryshkov to add HDMI expander support.
- A couple of i.MX1 and i.MX28 device node name fixes from Fabio Estevam.
- Enable usb3-lpm-capable for LS1021A usb3 node.
- A couple of imx6dl-yapp4 board improvements from Michal Vokáč.
- A series from Sebastian Reichel to improve imx6ull descriptions.
* tag 'imx-dt-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (43 commits)
ARM: dts: nxp: imx: fix weim node name
ARM: dts: nxp: imx6ul: fix touchscreen node name
ARM: dts: nxp: imx6ul: xnur-gpio -> xnur-gpios
ARM: dts: imx6ul: Remove fsl,anatop from usbotg1
ARM: dts: imx6ull: fix pinctrl node name
ARM: dts: imx1-apf9328: Fix Ethernet node name
ARM: dts: imx28-evk: Use 'eeprom' as the node name
ARM: dts: ls1021a: Enable usb3-lpm-capable for usb3 node
ARM: dts: imx6dl-yapp4: Move the internal switch PHYs under the switch node
ARM: dts: imx6dl-yapp4: Fix typo in the QCA switch register address
ARM: dts: imx6ul: Set macaddress location in ocotp
ARM: dts: imx53-qsb: add support for the HDMI expander
ARM: dts: imx6ull-dhcom: Remove /omit-if-no-ref/ from node usdhc1-pwrseq
ARM: dts: imx: Add support for Apalis Evaluation Board v1.2
ARM: dts: imx6: skov: add aliases for all ethernet nodes
ARM: dts: imx6qdl-hummingboard: Add rtc0 and rtc1 aliases to fix hctosys
ARM: dts: imx6dl: Add support for Sielaff i.MX6 Solo board
ARM: dts: imx6ul: Add missing #thermal-sensor-cells to tempmon
ARM: dts: imx6sl-tolino-shine2hd: fix touchscreen rotation
ARM: dts: imx6ull-dhcor: Remove 900MHz operating point
...
Link: https://lore.kernel.org/r/20240226034147.233993-3-shawnguo2@yeah.net
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt
Qualcomm ARM64 DeviceTree updates for v6.9
Four variants of Samsung Galaxy Core Prime and Grand Prime, built on
MSM8916, and the Hardware Development Kit (HDK) for SM8550, are
introduced.
On X Elite audio and compute remoteprocs, IPCC, PCIe, AOSS QMP, SMP2P,
TCSR, USB, display, audio, and soundwire support is introduced, and
enabled across the CRD and QCP devices.
For SM8650 PCIe controllers are moved to GIC-ITS and msi-map-mask is
defined. Missing qlink-logging reserved-memory region is added for the
modem remoteproc. FastRPC compute contexts are marked dma-coherent.
Audio, USB Type-C and PM8010 support is introduced across MTP and QRD
devices.
GPU cooling devices are hooked up across MSM8916, MSM8939, SC8180X,
SDM630, SDM845, SM6115, SM8150, SM8250, SM8350, and SM8550.
UFS PHY clocks are corrected across MSM8996, MSM8998, SC8180X, SC8280XP,
SDM845, SM6115, SM6125, SM8150, SM8250, SM8350, SM8550, and SM8650.
PCI MSI interrupts are wired up across SM8150, SM8250, SM8350, SM8450,
SM8550, SM8650, SC7280, and SC8180X
On IPQ6018 QUP5 I2C, tsens sand thermal zones are defined. The Inline
Crypto Engine (ICE) is enabled for IPQ9574.
On MSM8953 the GPU and its IOMMU is introduced, the reset for the
display subsystem is also wired up.
VLS CLAMP registers are specified for USB3 PHYs on MSM8998, QCM2290, and
SM6115.
USB Type-C port management is enabled on QRB4210 RB2.
On the SA8295P ADP the MAX20411 regulator powering the GPU rails is
introduced and the GPU is enabled. The first PCI instance on SA8540P
Ride is disabled for now, as a fix for the interrupt storm produced here
has not been presented.
On SA8775P the firmware memory map has changed and is updated. Safety
IRQ is added to the Ethernet controller.
On SC7180 UFS support is introduced and the cros-ec-spi is marked as
wakeup source.
For SC7280 capacity and DPC properties are added, cryptobam definition
is improved to work in more firmware environments, more Chrome-specific
properties are moved out from main dtsi, and cros-ec-spi is maked as a
wakeup source. Slimbus definition is added to the platform.
A missing reserved-memory range is added to Fairphone FP5, PMIC GLINK
and Venus are enabled. LEDs are introduced and voltage settings
corrected on the QCM6490 IDP, and RB3gen2 sees the same voltage changes
and GCC protected clocks are introduced to make the board boot properly.
RPMh sleep stats and a variety of cleanups and fixes are introduced for
SC8180X.
On SC8280XP the additional tsens instances are introduced. Camera
Subsystem and Camera Control Interface (CCI) are added. PMIC die-temp
vadc channels are introduced on the CRD, to allow ADC channels to be
tied to the shared PMIC temp-alarms, to actually report temperature.
On SDM630 USB QMP PHY support is introduced and enabled on the Inforce
IFC6560 board. On the various Sony Xperia XA2 variants WLED is enabled
and configured.
On SM6350 display subsystem interconnects and tsens-based thermal zones
are added. On SM7125 UFS support is added.
On Fairphone FP4, on SM7225, display and GPU are enabled, and firmware
paths are corrected.
SM8150 PCIe controller definitions are corrected.
As with SM8650, the SM8550 the fastrpc compute contexts are marked
dm-coherent, and PCIe controllers are moved to use GIC-ITS. The UFS
controller frequency definition is moved to the generic opp-table.
Touchscreen is enabled on the QRD device.
As usual, a variety of smaller cleanups and corrections to match
DeviceTree bindings and style guidelines are introduced across the
various files.
* tag 'qcom-arm64-for-6.9' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (176 commits)
arm64: dts: qcom: sm6115: fix USB PHY configuration
arm64: dts: sm8650: Add msi-map-mask for PCIe nodes
arm64: dts: qcom: replace underscores in node names
dt-bindings: arm: qcom: Add Samsung Galaxy Tab 4 10.1 LTE
arm64: dts: qcom: pm4125: define USB-C related blocks
arm64: dts: qcom: sa8540p-ride: disable pcie2a node
arm64: dts: qcom: sc7280: add slimbus DT node
arm64: dts: qcom: sc7280: Add capacity and DPC properties
arm64: dts: qcom: pmi632: Add PBS client and use in LPG node
arm64: dts: qcom: sm8550: Use GIC-ITS for PCIe0 and PCIe1
arm64: dts: qcom: sm8150: correct PCIe wake-gpios
arm64: dts: qcom: sdm845-db845c: correct PCIe wake-gpios
arm64: dts: qcom: sm7225-fairphone-fp4: Enable display and GPU
arm64: dts: qcom: sm6350: Remove "disabled" state of GMU
arm64: dts: qcom: msm8916-samsung-fortuna/rossa: Add fuel gauge
arm64: dts: qcom: sm6350: Add interconnect for MDSS
arm64: dts: qcom: msm8916-samsung-fortuna/rossa: Add initial device trees
arm64: dts: qcom: sm8550: Switch UFS from opp-table-hz to opp-v2
arm64: dts: qcom: sc8180x: describe all PCI MSI interrupts
arm64: dts: qcom: minor whitespace cleanup
...
Link: https://lore.kernel.org/r/20240225050146.484422-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into soc/dt
- new H616 peripherals: SPDIF, DMA, THS
- H616 fanout pin configuration
- H6 SPDIF node update
- minor cleanups
- enabled regulator on FETA40i board
- added wifi to Transpeed 8K618-T board
- new boards: Jide Remix Mini PC, Sipeed Longan Module 3H and
Longan Pi 3H
* tag 'sunxi-dt-for-6.9-1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
arm64: dts: allwinner: h616: Add thermal sensor and zones
ARM: dts: sun8i: Open FETA40i-C regulator aldo1
arm64: dts: allwinner: h616: Add Sipeed Longan SoM 3H and Pi 3H board support
dt-bindings: arm: sunxi: Add Sipeed Longan Module 3H and Longan Pi 3H
arm64: dts: allwinner: h616: minor whitespace cleanup
arm64: dts: allwinner: use capital "OR" for multiple licenses in SPDX
arm64: dts: allwinner: Transpeed 8K618-T: add WiFi nodes
arm64: dts: allwinner: h616: Add 32K fanout pin
arm64: dts: allwinner: Add Jide Remix Mini PC support
dt-bindings: arm: sunxi: document Remix Mini PC name
dt-bindings: vendor-prefixes: add Jide
arm64: dts: allwinner: h616: Add SPDIF device node
arm64: dts: allwinner: h616: Add DMA controller and DMA channels
arm64: dts: allwinner: h6: Add RX DMA channel for SPDIF
dt-bindings: sram: narrow regex for unit address to hex numbers
arm64: dts: allwinner: h616: Add Orange Pi Zero 2W to Makefile
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/dt
ARM: tegra: Device tree changes for v6.9-rc1
Add support for the LG Optimus 4X HD and LG Optimus VU devices and clean
up some minor issues.
* tag 'tegra-for-6.9-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
ARM: tegra: Add device-tree for LG Optimus 4X HD (P880)
ARM: tegra: Add device-tree for LG Optimus Vu (P895)
ARM: tegra: nexus7: Add missing clock binding into sound node
ARM: tegra: Enable cros-ec-spi as wake source
Link: https://lore.kernel.org/r/20240223174849.1509465-4-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt
Renesas DTS updates for v6.9 (take two)
- Add pin control, I2C, GPIO, CA76 cluster, Ethernet, SD/MMC, DMA, and
HyperFLASH/QSPI (RPC) support for the R-Car V4M SoC,
- Add I2C EEPROM, Ethernet, eMMC, and QSPI FLASH support for the Gray
Hawk Single development board,
- Fix PCIe power on ULCB development boards equipped with the
Shimafuji Kingfisher extension,
- Add PSCI support for the RZ/G3S SoC,
- Add camera support for the RZ/G2UL SMARC EVK development board,
- Add display support for the RZ/G2L{,C} and RZ/V2L SoCs and SMARC EVK
development boards,
- Miscellaneous fixes and improvements,
* tag 'renesas-dts-for-v6.9-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: (31 commits)
arm64: dts: renesas: rzg2l-smarc: Enable DU and link with DSI
arm64: dts: renesas: r9a07g054: Add DU node
arm64: dts: renesas: r9a07g044: Add DU node
arm64: dts: renesas: gray-hawk-single: Add QSPI FLASH support
arm64: dts: renesas: r8a779h0: Add RPC node
arm64: dts: renesas: r8a779h0: Add DMA support
arm64: dts: renesas: gray-hawk-single: Add eMMC support
arm64: dts: renesas: r8a779h0: Add SD/MMC node
ARM: dts: renesas: r8a7778: Add missing reg-names to sound node
arm64: dts: renesas: rzg2ul-smarc: Enable CRU, CSI support
arm64: dts: renesas: gray-hawk-single: Add Ethernet support
arm64: dts: renesas: r8a779h0: Add Ethernet-AVB support
arm64: dts: renesas: r8a779g0: Correct avb[01] reg sizes
arm64: dts: renesas: r8a779a0: Correct avb[01] reg sizes
arm64: dts: renesas: r9a08g045: Add PSCI support
arm64: dts: renesas: rzg3s-smarc-som: Guard Ethernet IRQ GPIO hogs
arm64: dts: renesas: r9a08g045: Add missing interrupts to IRQC node
arm64: dts: renesas: rzg2l: Add missing interrupts to IRQC nodes
arm64: dts: renesas: r8a779h0: Add CA76 operating points
arm64: dts: renesas: r8a779h0: Add CPU core clocks
...
Link: https://lore.kernel.org/r/cover.1708687134.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt
Display output for rk3128 and some adaptions to binding clarifications
for hdmi nodes on some older socs.
* tag 'v6.9-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
ARM: dts: rockchip: fix rk322x hdmi ports node
ARM: dts: rockchip: fix rk3288 hdmi ports node
ARM: dts: rockchip: Enable HDMI output for XPI-3128
ARM: dts: rockchip: Add HDMI node for RK3128
ARM: dts: rockchip: Add display subsystem for RK3128
Link: https://lore.kernel.org/r/37970455.XM6RcZxFsP@diego
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator into soc/dt
DTS fixes for the ARM Versatile boards:
- Use the "mtd-rom" compatible for the Realview ROM
- Fix up two VGA connector cells and labels
- Fix up the Cortex spelling
* tag 'versatile-dts-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator:
dt-bindings: arm: realview: Spelling s/ARM 11/Arm11/, s/Cortex A-/Cortex-A/
ARM: dts: integrator: Fix up VGA connector
ARM: dts: versatile: Fix up VGA connector
ARM: dts: arm: realview: Fix development chip ROM compatible value
Link: https://lore.kernel.org/r/CACRpkdaL6j6OdixHFHoMms4e=tXEw_6ynBMFb6m8=7KkVgEedA@mail.gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator into soc/dt
Gemini DTS changes for the v6.9 kernel:
- Fix the node names of the DSA switch in DIR-685.
- Fix the node names of the Vitesse DSA switches.
- Fix up the Wiligear compatible strings
- Use KEY_RESTART where applicable.
* tag 'gemini-dts-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator:
ARM: dts: gemini: Fix switch node names on Vitesse switches
ARM: dts: gemini: Map reset keys to KEY_RESTART
ARM: dts: gemini: Fix wiligear compatible strings
ARM: dts: gemini: Fix switch node names in the DIR-685
Link: https://lore.kernel.org/r/CACRpkdYQv9cyCZyjgQB4FTrxek9Hfu4EZ3syfHqHF7P6gzddvA@mail.gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-dt into soc/dt
Minor improvements in ARM DTS for v6.9
1. Marvell MMP2: Very old issue, for which I sent patch back in 2014.
Patch was never picked up and now another try to fix the same
happened, so here it goes: use proper compatible MAX8925.
2. Marvell Dove: add proper unit-addresses.
3. TI DA850: add MMC interrupts.
4. STI: minor white-space fixes.
* tag 'dt-cleanup-6.9' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-dt:
ARM: dts: sti: minor whitespace cleanup around '='
ARM: dts: da850: add MMD SDIO interrupts
ARM: dts: marvell: dove-cubox: fix si5351 node names
arm: dts: marvell: Fix maxium->maxim typo in brownstone dts
Link: https://lore.kernel.org/r/20240218182656.32103-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/dt
Samsung DTS ARM changes for v6.9
1. Disable thermal polling by Linux in Eynos5422 Odroid XU3 boards,
because drivers implement now proper dynamic trip points management.
2. Mark crosc-ec-spi in Peach Pi and Peach Pit as wake-up source, to
reflect the hardware capabilities.
3. Samsung P4 Note (Exynos4412): add accelerometer.
4. Samsung Galaxy Tab (Exynos5420):
- Reduce available RAM to avoid conflict with TrustZone.
- Add WiFi on MMC.
* tag 'samsung-dt-6.9' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: dts: samsung: exynos5420-galaxy-tab-common: add wifi node
ARM: dts: samsung: exynos5420-galaxy-tab: decrease available memory
ARM: dts: samsung: exynos4412-p4note: add accelerometer and gyro to p4note
ARM: dts: samsung: exynos5800-peach: Enable cros-ec-spi as wake source
ARM: dts: samsung: exynos5420-peach: Enable cros-ec-spi as wake source
ARM: dts: samsung: exynos5422-odroidxu3: disable thermal polling
Link: https://lore.kernel.org/r/20240218182141.31213-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt
Renesas DTS updates for v6.9
- Add GPIO keys and watchdog support for the RZ/G3S SMARC development
board,
- Add GNSS support for Renesas ULCB development boards equipped with
the Shimafuji Kingfisher extension,
- Add support for the standalone White Hawk CPU board,
- Add support for the R-Car V4H ES2.0 (R8A779G2) SoC and the White
Hawk Single development board,
- Add initial support for the R-Car V4M (R8A779H0) SoC and the Gray
Hawk Single development board,
- Add camera support for the RZ/G2UL SoC,
- Miscellaneous fixes and improvements.
* tag 'renesas-dts-for-v6.9-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: (29 commits)
arm64: dts: renesas: gray-hawk-single: Enable watchdog timer
arm64: dts: renesas: r8a779h0: Add RWDT node
arm64: dts: renesas: Improve TMU interrupt descriptions
ARM: dts: renesas: Improve TMU interrupt descriptions
arm64: dts: renesas: r9a07g043u: Add CSI and CRU nodes
arm64: dts: renesas: Add Gray Hawk Single board support
arm64: dts: renesas: Add Renesas R8A779H0 SoC support
arm64: dts: renesas: rzg3s-smarc-som: Enable the watchdog interface
arm64: dts: renesas: r9a08g045: Add watchdog node
arm64: dts: renesas: r8a779g0: Add missing SCIF_CLK2
dt-bindings: clock: Add R8A779H0 V4M CPG Core Clock Definitions
dt-bindings: clock: renesas,cpg-mssr: Document R-Car V4M support
dt-bindings: power: Add r8a779h0 SYSC power domain definitions
dt-bindings: power: renesas,rcar-sysc: Document R-Car V4M support
arm64: dts: renesas: r8a779g2: Add White Hawk Single support
arm64: dts: renesas: Add Renesas R8A779G2 SoC support
arm64: dts: renesas: white-hawk: Factor out common parts
arm64: dts: renesas: white-hawk-cpu: Factor out common parts
arm64: dts: renesas: white-hawk: Add SoC name to top-level comment
arm64: dts: renesas: white-hawk: Drop SoC parts from sub boards
...
Link: https://lore.kernel.org/r/cover.1707487834.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Add the crypto accelerator enable on stm32mp135f-dk board.
Signed-off-by: Thomas Bourgoin <thomas.bourgoin@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
|
|
Enable Cyclic redundancy check on stm32mp135f-dk.
Signed-off-by: Lionel Debieve <lionel.debieve@foss.st.com>
Signed-off-by: Thomas Bourgoin <thomas.bourgoin@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
|
|
The Cyclic redundancy check calculation unit (CRC) peripheral
offers a CRC-based operation (CRC32/CRC32C) used to verify data
transmission or storage integrity.
This peripheral is integrated in stm32mp131 and can be default
enabled.
Signed-off-by: Lionel Debieve <lionel.debieve@foss.st.com>
Signed-off-by: Thomas Bourgoin <thomas.bourgoin@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
|
|
As reported in the section 8.3 (i. e. Board revision history) of document
UM2033 (i. e. Discovery kit with STM32F769NI MCU) these are the changes
related to the board revision addressed by the patch:
- Board MB1166 revision A-09:
- LCD FRIDA FRD397B25009-D-CTK replaced by FRIDA FRD400B25025-A-CTK
The patch adds the DTS support for the new display which belongs to the
the Novatek NT35510-based panel family.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
|
|
The patch adds display support on the stm32f769-disco board.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
|
|
In the schematics of document UM2033, the power supply for the micro SD
card is the same 3v3 voltage that is used to power other devices on the
board. By generalizing the name of the voltage regulator, it can be
referenced by other nodes in the device tree without creating
misunderstandings.
This patch is preparatory for future developments.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Reviewed-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
|
|
Add support for MIPI DSI Host controller. Since MIPI DSI is not
available on stm32f746, the patch adds the "stm32f769.dtsi" file
containing the dsi node inside.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
|
|
In some instances the kernel fails to detect the sdio wifi module
in the Sonoff iHost.
Tweak sdio properties to improve detection of rtl8723ds wifi module
Signed-off-by: Tim Lunn <tim@feathertop.org>
Link: https://lore.kernel.org/r/20240215110425.934740-3-tim@feathertop.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Add aliases for sdio and sdmmc to ensure consistent ordering of
mmc devices on boot
Signed-off-by: Tim Lunn <tim@feathertop.org>
Link: https://lore.kernel.org/r/20240215110425.934740-2-tim@feathertop.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Various control signals such as sfp module-absence, pci-e reset or led
gpios were missing pinctrl nodes, leaving any u-boot choices in place.
Since U-Boot is shared between multiple board variants, i.e. a388
clearfog pro / base, clearfog gtr l8 / s4, it is better to explicitly
configure functions.
Add explicit pinctrl entries for all gpios currently in use.
Additionally the loss-of-signal gpio specified is invalid, in fact los
only has a pull-up on the board but no gpio connection to the cpu.
Remove this stray reference.
Signed-off-by: Josua Mayer <josua@solid-run.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
|
|
Cosmetic change to increase future patches readability when adding new
pinctrl nodes.
Signed-off-by: Josua Mayer <josua@solid-run.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
|
|
Most arm board have a board-specific compatible string that allows e.g.
userspace to match specific firmware variants or apply specific
policies.
Add board-specific properties to both variants of the Clearfog GTR:
- solidrun,clearfog-gtr-l8
- solidrun,clearfog-gtr-s4
Introduction of a common parent (e.g. "solidrun,clearfog-gtr") is
omitted for brevity.
Since announcement of the two products no additional variants were added
it is assumed that there will always be just two.
Signed-off-by: Josua Mayer <josua@solid-run.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
|
|
Armada 388 Clearfog ("armada-388-clearfog.dts)" is a legacy filename for
the Armada 388 Clearfog Pro ("armada-388-clearfog-pro.dts").
The "Pro" suffix was only used when the smaller version, the "Base" got
released.
The two names refer to exactly the same hardware, therefore they should
share the same compatible strings.
Copy "solidrun,clearfog-pro-a1" compatible from the -pro dts and add it
to this legacy file.
Signed-off-by: Josua Mayer <josua@solid-run.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
|
|
As the TWL6030 chip is the main power controller here, declare
it as system-power-controller
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Message-ID: <20240217082007.3238948-5-andreas@kemnade.info>
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
Configure the TWL6032 as system power controller to let the device
power off.
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Message-ID: <20240217082007.3238948-4-andreas@kemnade.info>
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
Move the pending urls back to https:// and mark the ones that are no
longer accessible (http or https) as defunct.
Signed-off-by: Nishanth Menon <nm@ti.com>
Message-ID: <20240109195500.3833121-1-nm@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
for dra7 SoC
abb_{mpu,ivahd,dspeve,gpu} have 'reg' so they must have unit address to fix dtc
W=1 warnings:
Warning (unit_address_vs_reg): /ocp/regulator-abb-mpu: node has a reg or ranges property, but no unit name
Warning (unit_address_vs_reg): /ocp/regulator-abb-ivahd: node has a reg or ranges property, but no unit name
Warning (unit_address_vs_reg): /ocp/regulator-abb-dspeve: node has a reg or ranges property, but no unit name
Warning (unit_address_vs_reg): /ocp/regulator-abb-gpu: node has a reg or ranges property, but no unit name
Signed-off-by: Romain Naour <romain.naour@skf.com>
Message-ID: <20240123085551.733155-3-romain.naour@smile.fr>
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
sys_32k_ck node have 'reg' so it must have unit address to fix dtc
W=1 warnings:
Warning (unit_address_vs_reg): /ocp/interconnect@4a000000/segment@0/target-module@2000/scm@0/scm_conf@0/clocks/clock-sys-32k: node has a reg or ranges property, but no unit name
Signed-off-by: Romain Naour <romain.naour@skf.com>
Message-ID: <20240123085551.733155-2-romain.naour@smile.fr>
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
phy_gmii_sel node have 'reg' so it must have unit address to fix dtc
W=1 warnings:
Warning (unit_address_vs_reg): /ocp/interconnect@4a000000/segment@0/target-module@2000/scm@0/scm_conf@0/phy-gmii-sel: node has a reg or ranges property, but no unit name
Signed-off-by: Romain Naour <romain.naour@skf.com>
Message-ID: <20240123085551.733155-1-romain.naour@smile.fr>
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
DT node names should be generic, so replace "weim" node name with
"memory-controller" in all i.MX SoC DT files.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The canonical node name for touchscreens is "touchscreen",
so update the i.MX6UL "tsc" node accordingly.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Replace all "xnur-gpio" with "xnur-gpios" in the i.MX6UL(L) Touchscreen
node, since the -gpio suffix is deprecated. All known implementations of
this binding can handle -gpio and -gpios since day 1, so this should be
fully backwards compatible.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
fsl,anatop should only be added to the usbphy nodes.
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
pinctrl node name must be either pinctrl or pinmux.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Per davicom,dm9000.yaml, the Ethernet node name should be 'ethernet'.
Change it to fix the following schema warning:
imx1-apf9328.dtb: eth@4,c00000: $nodename:0: 'eth@4,c00000' does not match '^ethernet(@.*)?$'
from schema $id: http://devicetree.org/schemas/net/davicom,dm9000.yaml#
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Per at24.yaml, the node name should be 'eeprom'.
Change it accordingly to fix the following schema warning:
imx28-evk.dtb: at24@51: $nodename:0: 'at24@51' does not match '^eeprom@[0-9a-f]{1,2}$'
from schema $id: http://devicetree.org/schemas/eeprom/at24.yaml#
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Enable USB3 HW LPM feature.
Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
We identified that the PHYs actually do not work since commit 7da7b84fee58
("ARM: dts: imx6dl-yapp4: Move phy reset into switch node") as
a coincidence of several circumstances.
The reset signal is kept asserted by a pull-down resistor on the board
unless it is deasserted by GPIO from the SoC. This is to keep the switch
dead until it is configured properly by the kernel and user space.
Prior to the referenced commit the switch was reset by the FEC driver
and the reset GPIO was actively deasserted. The mdio-bus was scanned
and the attached switch and its PHYs were found and configured.
With the referenced commit the switch is reset by the qca8k driver.
Because of another bug in the qca8k driver, functionality of the reset
pin depends on its pre-kernel configuration. See commit c44fc98f0a8f
("net: dsa: qca8k: fix illegal usage of GPIO")
The problem did not appear until we removed support for the switch
and configuration of its reset pin from the bootloader.
To fix that, properly describe the internal mdio-bus configuration of
the qca8334 switch. The PHYs are internal to the switch and sit on its
internal mdio-bus.
Fixes: 7da7b84fee58 ("ARM: dts: imx6dl-yapp4: Move phy reset into switch node")
Signed-off-by: Michal Vokáč <michal.vokac@ysoft.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
This change does not have any functional effect. The switch works just
fine without this patch as it has full access to all the addresses
on the bus. This is simply a clean-up to set the node name address
and reg address to the same value.
Fixes: 15b43e497ffd ("ARM: dts: imx6dl-yapp4: Use correct pseudo PHY address for the switch")
Signed-off-by: Michal Vokáč <michal.vokac@ysoft.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
