summaryrefslogtreecommitdiff
path: root/arch/arm/configs/omap2plus_defconfig
AgeCommit message (Collapse)Author
2019-04-18mtd: rawnand: Clarify Kconfig entry MTD_NANDMiquel Raynal
MTD_NAND is large and encloses much more than what the symbol is actually used for: raw NAND. Clarify the symbol by naming it MTD_RAW_NAND instead. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-04-18mtd: nand: Clarify Kconfig entry for software BCH ECC algorithmMiquel Raynal
There is no point in having two distinct entries, merge them and rename the symbol for more clarity: MTD_NAND_ECC_SW_BCH Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-01-31ARM: omap2plus_defconfig: Update for moved optionsTony Lindgren
These options have just moved around, let's update with make savedefconfig to make patching the file easier. Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-01-31ARM: omap2plus_defconfig: Update for dropped optionsTony Lindgren
These are all now selected by default so we can drop them from omap2plus_defconfig. Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-01-31ARM: omap2plus_defconfig: remove PROVE_LOCKING from defconfigLukasz Luba
PROVE_LOCKING enables LOCKDEP, which causes big overhead on cache and bus transactions. On some ARM big.LITTLE architecutres (Exynos 5433) the overhead is really big. The overhead can be measures using hackbench which will speed up by x3 times (11sec -> 3.4sec). When you check transaction on cache or buses, the results are way higher than normal for the same hackbench test: L1d cache invalidations: 26mln vs 4mln L2u cache invalidations: 42mln vs 12mln bus cyc/access: 30cyc/access vs. 20cyc/access context switch is x3 times cheaper Enable this option only when you have some locking issue to investigate. Signed-off-by: Lukasz Luba <l.luba@partner.samsung.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-12-31Merge tag 'armsoc-defconfig' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC defconfig updates from Olof Johansson: "Most changes here are to enable new drivers and platforms in the various configs that affect them. Most of these have been covered and described in the other branches, we mostly keep defconfig separate to avoid conflicts between SoC/dt/driver updates that they otherwise would be grouped with. One thing worth mentioning here is that OMAP changes from using their own UART driver, to 8250, for the multi_v7_defconfig shared config on 32-bit. This means that the console is now named ttyS* instead of ttyO*. This change was already done for omap2_defconfig a while back, so most users of these configs have either already updated, or can easily follow the same patterns as they did at that time. This makes platform support slightly easier for distros, since they no longer need to keep track of a separate console prefix for these platforms" * tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (31 commits) Revert "arm64: defconfig: Enable FSL_MC_BUS and FSL_MC_DPIO" arm64: defconfig: Enable FSL_MC_BUS and FSL_MC_DPIO arm64: defconfig: Replace PINCTRL_MT7622 with PINCTRL_MTK_MOORE arm64: defconfig: Regenerate for v4.20 ARM: multi_v7_defconfig: Add TOSHIBA TC358764 bridge driver ARM: multi_v7_defconfig: Add MAX8952 regulator driver ARM: exynos_defconfig: Add TOSHIBA TC358764 bridge driver ARM: exynos_defconfig: Add MAX8952 regulator driver ARM: exynos_defconfig: Add MAX8998 RTC and charger drivers ARM: imx_v6_v7_defconfig: add imx7ulp support ARM: imx_v6_v7_defconfig: Select TOUCHSCREEN_GOODIX ARM: multi_v7_defconfig: enable STM32 analog & timer drivers arm64: defconfig: Enable GCC and PINCTRL for MSM8998 arm64: defconfig: Enable core Qualcomm SDM845 options ARM: defconfig: Enable the PL111 DRM driver on vexpress ARM: defconfig: Update the vexpress defconfig arm64: defconfig: Enable some qcom remoteproc configs arm64: defconfig: Enable QCS404 configs ARM: imx_v6_v7_defconfig: Enable USB_ANNOUNCE_NEW_DEVICES ARM: imx_v6_v7_defconfig: Enable BT_BNEP ...
2018-12-18ARM: omap2plus_defconfig: Update the audio optionsPeter Ujfalusi
Use the new options for default audio support and enable Nokia n900 audio as well. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-09-24ARM: omap2plus_defconfig: Add tlv320aic23 as moduleAdam Ford
The AM3517 EVM has an expander board which has two tlv320aic23 codecs. This enables the driver for these codecs as a module. Signed-off-by: Adam Ford <aford173@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-03-20ARM: omap2plus_defconfig: Add UINPUTTony Lindgren
This can be used for keyboard fn keys with funkeymonkey. Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-03-20ARM: omap2plus_defconfig: Enable MDM6600 USB PHYTony Lindgren
This allows droid 4 USB modem to work. Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-03-20ARM: omap2plus_defconfig: Add AUDIO_GRAPH_CARDTony Lindgren
This is needed for audio on droid 4. Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-03-20ARM: omap2plus_defconfig: Enable PWM_VIBRATony Lindgren
We can use PWM_VIBRA on many phones like droid 4. Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-03-06ARM: omap2plus_defconfig: Enable 8250_OMAPTony Lindgren
We've had 8250_OMAP working for few years now, so let's start enabling it by default. We provide users an option to warn by default with SERIAL_8250_OMAP_TTYO_FIXUP by default. That option updates the serial console to point to 8250 driver and warns about it. Users with ttyO[0123] in their /etc/inittab should update inittab to use ttyS[0123] instead. Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-03-06ARM: omap2plus_defconfig: Switch to use omapdrm by defaultTony Lindgren
We've had omapdrm working for few years now so let's use it by default. Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-03-06ARM: omap2plus_defconfig: Enable CECTony Lindgren
We have CEC support available and working so let's enable it. Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-03-06ARM: omap2plus_defconfig: Enable am335x and am437x PM optionsTony Lindgren
These are needed to enable low-power suspend mode as described by Dave. Note that these depend on the am335x-pm-firmware.elf. Cc: Dave Gerlach <d-gerlach@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-03-06ARM: omap2plus_defconfig: Drop unneeded optionsTony Lindgren
These are no longer needed because: - PCI_DRA7XX_HOST selects PCI_DRA7XX - USB_NET_QMI_WWAN selects USB_WDM - USB_PHY selects EXTCON - IIO_CONFIGFS selects CONFIGFS_FS - TIMER_STATS option no longer exists - CRYPTO_SHA1_ARM_NEON selects CRYPTO_SHA1_ARM Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-03-06ARM: omap2plus_defconfig: Add SND_OSSEMULTony Lindgren
We have SND_MIXER_OSS and SND_PCM_OSS but they now depend on SND_OSSEMUL selecting SOUND_OSS_CORE. Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-03-06ARM: omap2plus_defconfig: Update LIRC optionsTony Lindgren
We have LIRC selected as a loadable module but it must now be built-in. Let's update that and add few interesting new options for blinking IR LEDs. Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-03-06ARM: omap2plus_defconfig: Select MFD_TI_LMUTony Lindgren
We have REGULATOR_LM363X selected but not MFD_TI_LMU and REGULATOR_LM363X depends on MFD_TI_LMU. Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-03-01ARM: omap2plus_defconfig: Add SERIAL_DEV for bluetoothTony Lindgren
We now have SERIAL_DEV that at least TI WLAN devices can use. We want SERIAL_DEV built-in, so we can also enable the option for SERIAL_DEV_CTRL_TTYPORT. Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-03-01ARM: omap2plus_defconfig: Update for moved optionsTony Lindgren
Just move the options around to make applying patches against omap2plus_defconfig easier after making make savedefconfig. Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-02-28ARM: omap2plus_defconfig: Enable CONFIG_MMC_SDHCI_OMAPKishon Vijay Abraham I
Enable CONFIG_MMC_SDHCI_OMAP so that TI's dra7 based SoC's can use sdhci-omap driver for eMMC/SD/SDIO controller. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-01-04Merge tag 'omap-for-v4.16/defconfig-signed' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/soc Two defconfig updates for omaps These are to configure dra7 PCIe for omap2plus_defconfig and multi_v7_defconfig. * tag 'omap-for-v4.16/defconfig-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: multi_v7_defconfig: Enable CONFIG_PCI_DRA7XX (Host & Device modes) ARM: omap2plus_defconfig: Enable CONFIG_PCI_DRA7XX (Host & Device modes) Signed-off-by: Olof Johansson <olof@lixom.net>
2017-12-21ARM: omap2plus_defconfig: Enable CONFIG_PCI_DRA7XX (Host & Device modes)Kishon Vijay Abraham I
Enable CONFIG_PCI_DRA7XX in order to be able to configure PCIe controller present in dra7 SoCs in both host mode and device mode. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-10-20ARM: omap2plus_defconfig: Enable droid 4 USB PHYTony Lindgren
Let's enable this as loadable module for droid 4. Cc: Marcel Partap <mpartap@gmx.net> Cc: Michael Scott <michael.scott@linaro.org> Cc: Sebastian Reichel <sre@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-10-02ARM: omap2plus_defconfig: enable NEON based cryptoArd Biesheuvel
Enable kernel mode NEON and the various NEON based crypto algorithms, which are between 1.4x (AES-XTS) and 2.4x (AES-GCM) faster than scalar code (measured on Cortex-A8). Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-09-10Merge tag 'armsoc-platforms' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM/arm64 SoC platform updates from Olof Johansson: "This branch contains platform updates for 32- and 64-bit ARM, including defconfig updates to enable new options, drivers and platforms. There are also a few fixes and cleanups for some existing vendors. Some of the things worth highlighting here are: - Enabling new crypt drivers on arm64 defconfig - QCOM IPQ8074 clocks and pinctrl drivers on arm64 defconfig - Debug support enabled for Renesas r8a7743 - Various config updates for Renesas platforms (sound, USB, other drivers) - Platform support (including SMP) for TI dra762 - OMAP cleanups: Move to use generic 8250 debug_ll, removal of stale DMA code" * tag 'armsoc-platforms' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (109 commits) ARM: multi_v7_defconfig: make eSDHC driver built-in arm64: defconfig: enable rockchip graphics MAINTAINERS: Update Cavium ThunderX2 entry ARM: config: aspeed: Add I2C, VUART, LPC Snoop ARM: configs: aspeed: Update Aspeed G4 with VMSPLIT_2G ARM: s3c24xx: Fix NAND ECC mode for mini2440 board ARM: davinci_all_defconfig: enable tinydrm and ST7586 arm64: defconfig: Enable QCOM IPQ8074 clock and pinctrl ARM: defconfig: tegra: Enable ChipIdea UDC driver ARM: configs: Add Tegra I2S interfaces to multi_v7_defconfig ARM: tegra: Add Tegra I2S interfaces to defconfig ARM: tegra: Update default configuration for v4.13-rc1 MAINTAINERS: update ARM/ZTE entry soc: versatile: remove unnecessary static in realview_soc_probe() ARM: Convert to using %pOF instead of full_name ARM: hisi: Fix typo in comment ARM: multi_v7_defconfig: add CONFIG_BRCMSTB_THERMAL arm64: defconfig: add CONFIG_BRCMSTB_THERMAL arm64: defconfig: add recently added crypto drivers as modules arm64: defconfig: enable CONFIG_UNIPHIER_WATCHDOG ...
2017-08-20media: rc-core: do not depend on MEDIA_SUPPORTSean Young
There is no dependency between the two, so remove the dependency in Kconfig files. Signed-off-by: Sean Young <sean@mess.org> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-14ARM: omap2plus_defconfig: Enable LP87565Lokesh Vutla
dra76-evm has LP87565. Enable it in omap2plus_defconfig. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-08-10ARM: omap2plus_defconfig: enable DP83867 phy driverSekhar Nori
TI's DP83867 phy is used on DRA72x EVM rev C and DRA71x EVMs. Enable support for it in omap2plus_defconfig. The driver is built into the kernel to help NFS booting. Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-04-19Merge tag 'omap-for-v4.12/defconfig-signed' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/defconfig Defconfig updates for omaps for v4.12 merge window. Mostly to update to use new ti-cpufreq driver, the rest is just to enable drivers found on various devices: - Update to use ti-cpufreq driver that we now have - Enable SATA for ti81xx as a loadable module - Enable Ethernet PHY for DP83848 - Enable modem related modules for PPP, QMI and USB ACM as loadable modules - Enable droid 4 related drivers as lodable modules except for PMIC and regulator so eMMC can be used for root * tag 'omap-for-v4.12/defconfig-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: omap2plus_defconfig: Enable droid 4 devices ARM: omap2plus_defconfig: Add QMI, ACM and PPP as loadable modules ARM: omap2plus_defconfig: Enable TI Ethernet PHY ARM: omap2plus_defconfig: enable ahci-dm816 module ARM: omap2plus_defconfig: Enable support for ti-cpufreq Signed-off-by: Olof Johansson <olof@lixom.net>
2017-04-10ARM: omap2plus_defconfig: Enable droid 4 devicesTony Lindgren
We only need to have MFD_CPCAP and CPCAP_REGULATOR as built-in to be able to mount root on the eMMC. And then POWER_RESET_GPIO is good to have built-in. The rest of the devices can be loadable modules. This gets various devices such as regulators, touchscreen, power button, HDMI audio, LEDs, RTC, and ADC working. Note that omapdrm needs to be configured manually as we're still using omapfb by default. Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-04-10ARM: omap2plus_defconfig: Add QMI, ACM and PPP as loadable modulesTony Lindgren
We have devices with modems connected, so let's make them usable. Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-04-04ARM: omap2plus_defconfig: Enable TI Ethernet PHYRoger Quadros
DP83848_PHY i.e. [TI TLK10X 10/100 Mbps PHY] is used on the am335x-icev2 board. Enable the PHY driver for it. Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-03-23ARM: omap2plus_defconfig: enable ahci-dm816 moduleBartosz Golaszewski
This is now supported on the dm8168-evm board, so enable it in the defconfig for omap2+. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-03-06ARM: omap2plus_defconfig: Enable support for ti-cpufreqDave Gerlach
AM335x, AM437x, DRA7xx, and AM57xx platforms all now depend on ti-cpufreq driver to enable proper OPPs for use with cpufreq, so enable the same. Signed-off-by: Dave Gerlach <d-gerlach@ti.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-03-06Merge tag 'v4.11-rc1' into omap-for-v4.11/fixesTony Lindgren
Linux 4.11-rc1
2017-02-28ARM: omap2plus_defconfig: Enable INPUT_MOUSEDEV as loadable modulesTony Lindgren
Otherwise mice won't be happy. Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-01-24ARM: omap2plus_defconfig: Enable support for RTC M41T80Teresa Remmet
The phyCORE-AM335x SoM has a RV4162 RTC populated which is supported by the M41T80 driver. Enabled it so make the RTC support on the SoM available. Signed-off-by: Teresa Remmet <t.remmet@phytec.de> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-01-24ARM: omap2plus_defconfig: Enable support for micrell physTeresa Remmet
The phyCORE-AM335x SoM with PCM-953 carrierboard has a KSZ9021 phy mounted. To add support for this we need to enable the micrell phy driver in the config. Signed-off-by: Teresa Remmet <t.remmet@phytec.de> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-01-23ARM: omap2plus_defconfig: Fix probe errors on UARTs 5 and 6Tony Lindgren
We have more than four uarts on some SoCs and that can cause noise with errors while booting. Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-01-05ARM: defconfig: omap2plus: switch LIS3LV02DL driverLinus Walleij
The OMAP2 plus defconfig lists the LIS3LC02D MISC driver but there is nowadays a proper IIO driver for this accelerometer. Switch the config to the new driver. The IIO software triggers are helpful when using these devices without a dedicated IRQ line, so activate those too. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-11-15ARM: omap2plus_defconfig: Run make savedefconfig to save some spaceTony Lindgren
This shrinks down omap2plus_defconfig a bit and makes it easier for people to generate minimal patches against it. Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-11-09ARM: omap2plus_defconfig: Enable LP873X supportLokesh Vutla
LP873X family of PMICs are used in dra71x-evm, So enable the same. Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-11-09ARM: omap2plus_defconfig: Enable REGULATOR_GPIOLokesh Vutla
GPIO regulator is used on dra71-evm platform to control MMCSD IO voltage Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-11-09ARM: omap2plus_defconfig: Enable TOUCHSCREEN_TSC2004Adam Ford
The LogicPD DM3730 Torpedo and SOM-LV devices have the TI TSC2004 touchscreen controller. Enable the related driver as a module. Signed-off-by: Adam Ford <aford173@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-08-26ARM: omap2plus_defconfig: switch to the IIO BMP085 driverLinus Walleij
This alters the OMAP2plus defconfig to use the IIO BMP280 driver, which is compatible with the BMP085 instead of the old BMP085-specific misc driver. The IIO driver nowadays have all the features of the old driver and more. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-07-11ARM: omap2plus_defconfig: Fix USB selection to keep Ethernet workingTony Lindgren
With the recent Kconfig changes we need to now enable the PHYs to keep USB working. Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-04-27ARM: omap2plus_defconfig: Enable PWM and ir-rx51 as loadable modulesTony Lindgren
These are available on n900. Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
generated by cgit (git 2.34.1) at 2024-06-21 06:29:56 +0000