summaryrefslogtreecommitdiff
path: root/arch/arm/configs
AgeCommit message (Collapse)Author
2016-12-15Merge tag 'armsoc-defconfig' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC defconfig updates from Arnd Bergmann: "Defconfig additions, removals, etc. Most of these are small changes adding the options for newly upstreamed drivers, or drivers needed for new board support. Bartlomiej Zolnierkiewicz has done a series of patches reducing the use of CONFIG_IDE from 19 to 3 in favor of CONFIG_ATA. Overall more patches than usual, but nothing big" * tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (54 commits) ARM: davinci_all_defconfig: Enable da8xx usb otg ARM: defconfig: drop GPIO_SYSFS on multiplatforms ARM: multi_v7_defconfig: enable STMicroelectronics HVA driver ARM: configs: Add new config fragment to change RAM start point ARM: davinci_all_defconfig: Enable OHCI as module ARM: defconfig: turn on the DT cpufreq for Integrator ARM: omap2plus_defconfig: Run make savedefconfig to save some space ARM: davinci_all_defconfig: add missing options for systemd ARM: davinci_all_defconfig: enable the mstpri and ddrctl drivers ARM: bcm2835: add thermal driver to default config ARM: omap2plus_defconfig: Enable LP873X support ARM: omap2plus_defconfig: Enable REGULATOR_GPIO ARM: omap2plus_defconfig: Enable TOUCHSCREEN_TSC2004 ARM: socfpga_defconfig: enable FS configs to support Angstrom filesystem ARM: config: Enable GPIO Key driver in stm32_defconfig ARM: tegra: Enable GMI driver in default configuration ARM: tegra: Enable SGTL5000 audio ARM: tegra: Update default configuration for v4.9-rc1 ARM: socfpga: updates for socfpga_defconfig ARM: davinci_all_defconfig: enable LED default-on trigger ...
2016-12-13Merge tag 'rproc-v4.10' of git://github.com/andersson/remoteprocLinus Torvalds
Pull remoteproc updates from Bjorn Andersson: - introduce remoteproc "subdevice" support, which allows remoteproc driver to associate devices to the "running" state of the remoteproc, allowing devices to be probed and removed as the remote processor is booted, shut down or recovering from a crash. - handling of virtio device resources was improved, vring memory is now allocated as part of other memory allocation. This ensures that all vrings for all virtio devices are allocated before we boot the remote processor. - the debugfs mechanism for starting and stopping remoteproc instances was replaced with a sysfs interface, also providing a mechanism for specifying firmware to use by the instance. This allows user space to load and boot use case specific firmware on remote processors. - new drivers for the ST Slimcore and Qualcomm Hexagon DSP as well as removal of the unused StE modem loader. - finally support for crash recovery in the Qualcomm Wirelss subsystem (used for WiFi/BT/FM on a number of platforms) and a number of bug fixes and cleanups * tag 'rproc-v4.10' of git://github.com/andersson/remoteproc: (49 commits) remoteproc: qcom_adsp_pil: select qcom_scm remoteproc: Drop wait in __rproc_boot() remoteproc/ste: Delete unused driver remoteproc: Remove "experimental" warning remoteproc: qcom_adsp_pil: select qcom_scm dt-binding: soc: qcom: smd: Add label property remoteproc: qcom: mdt_loader: add include for sizes remoteproc: Update last rproc_put users to rproc_free remoteproc: qcom: adsp: Add missing MODULE_DEVICE_TABLE remoteproc: wcnss-pil: add QCOM_SMD dependency dmaengine: st_fdma: Revert: "Revert: Update st_fdma to 'depends on REMOTEPROC'" remoteproc: Add support for xo clock remoteproc: adsp-pil: fix recursive dependency remoteproc: Introduce Qualcomm ADSP PIL dt-binding: remoteproc: Introduce ADSP loader binding remoteproc: qcom_wcnss: Fix circular module dependency remoteproc: Merge table_ptr and cached_table pointers remoteproc: Remove custom vdev handler list remoteproc: Update max_notifyid as we allocate vrings remoteproc: Decouple vdev resources and devices ...
2016-12-13Merge tag 'leds_for_4.10' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds Pull LED updates from Jacek Anaszewski: - userspace LED class driver - it can be useful for testing triggers and can also be used to implement virtual LEDs - LED class driver for NIC78bx device - LED core fixes for preventing potential races while setting brightness when software blinking is enabled - improvements in LED documentation to mention semantics on changing brightness while trigger is active * tag 'leds_for_4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds: leds: pca955x: Add ACPI support leds: netxbig: fix module autoload for OF registration leds: pca963x: Add ACPI support leds: leds-cobalt-raq: use builtin_platform_driver led: core: Fix blink_brightness setting race led: core: Use atomic bit-field for the blink-flags leds: Add user LED driver for NIC78bx device leds: verify vendor and change license in mlxcpld driver leds: pca963x: enable low-power state leds: pca9532: Use default trigger value from platform data leds: pca963x: workaround group blink scaling issue cleanup LED documentation and make it match reality leds: lp3952: Export I2C module alias information for module autoload leds: mc13783: Fix MC13892 keypad led access ledtrig-cpu.c: fix english leds/leds-lp5523.txt: make documentation match reality tools/leds: Add uledmon program for monitoring userspace LEDs leds: Use macro for max device node name size leds: Introduce userspace LED class driver mfd: qcom-pm8xxx: Clean up PM8XXX namespace
2016-12-07Merge tag 'davinci-for-v4.10/defconfig-4' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into next/defconfig Enable support for MUSB based USB OTG on DA850. * tag 'davinci-for-v4.10/defconfig-4' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci: ARM: davinci_all_defconfig: Enable da8xx usb otg Signed-off-by: Olof Johansson <olof@lixom.net>
2016-12-01ARM: davinci_all_defconfig: Enable da8xx usb otgAlexandre Bailon
The musb driver is enabled but the phy and the glue for the da8xx are not enabled. Enable them. Signed-off-by: Alexandre Bailon <abailon@baylibre.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2016-11-30Merge tag 'sti-defconfig-for-4.10-round3' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/pchotard/sti into next/defconfig Pull "STi defconfig fix" from Patrice Chotard: Enable HVA (Hardware Video Accelerator) video encoder driver for STMicroelectronics SoC. * tag 'sti-defconfig-for-4.10-round3' of git://git.kernel.org/pub/scm/linux/kernel/git/pchotard/sti: ARM: multi_v7_defconfig: enable STMicroelectronics HVA driver
2016-11-30ARM: defconfig: drop GPIO_SYSFS on multiplatformsLinus Walleij
The sysfs ABI to GPIO is marked obsolete and should not be encouraged. Users should be encouraged to switch to using the character device. Let's begin by removing it from the multi defconfigs. Then as time goes by I can aggressively remove it from other defconfigs. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2016-11-30Merge tag 'arm-soc/for-4.10/defconfig' of ↵Arnd Bergmann
http://github.com/Broadcom/stblinux into next/defconfig Pull "Broadcom defconfig changes for 4.10" from Florian Fainelli: This pull request contains Broadcom ARM-based defconfig changes for 4.10, please pull the following: - Florian updates the multi_v7_defconfig with the relevant basic drivers needed for the Broadcom BCM5301x (Northstar) SoCs to reboot, have PCIe, and Ethernet - Martin enables the Raspberry Pi thermal driver in bcm2835_defconfig * tag 'arm-soc/for-4.10/defconfig' of http://github.com/Broadcom/stblinux: ARM: bcm2835: add thermal driver to default config ARM: multi_v7_defconfig: Enable BCM47xx/BCM5301x drivers
2016-11-30Merge tag 'davinci-for-v4.10/defconfig-3' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into next/defconfig Pull "DaVinci defconfig updates for v4.10 (part 3)" from Sekhar Nori: Enables newly introduced DDR controller and master priority setting drivers in kernel. Also, update defconfig to boot latest systemd based filesystems on DA850. A patch enabling USB OHCI support in davinci defconfig. * tag 'davinci-for-v4.10/defconfig-3' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci: ARM: davinci_all_defconfig: Enable OHCI as module ARM: davinci_all_defconfig: add missing options for systemd ARM: davinci_all_defconfig: enable the mstpri and ddrctl drivers
2016-11-28ARM: multi_v7_defconfig: enable STMicroelectronics HVA driverPatrice Chotard
Enable HVA (Hardware Video Accelerator) video encoder driver for STMicroelectronics SoC. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2016-11-26ARM: configs: Add new config fragment to change RAM start pointAlexandre TORGUE
Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2016-11-25Merge branch 'v4.9-rc2-arm-configs-pata' of ↵Arnd Bergmann
https://github.com/bzolnier/linux into next/defconfig Merge "IDE to PATA change in ARM defconfigs from Bartlomiej Zolnierkiewicz: On Monday, October 31, 2016 07:14:13 PM Bartlomiej Zolnierkiewicz wrote: > On Monday, October 31, 2016 03:46:22 PM Russell King - ARM Linux wrote: > > On Wed, Oct 26, 2016 at 07:01:12PM +0200, Bartlomiej Zolnierkiewicz wrote: > > > On Wednesday, July 13, 2016 04:37:31 PM Arnd Bergmann wrote: > > > > I'd be fine with just getting a pull request with all the patches that > > > > had no negative feedback and that were not already applied (if any). > > > > > > Here it is (sorry for taking so long). > > > > I've just been digging in the dmesg logs from when I was using the > > Assabet+Neponset as my firewall, and it was having to use the IDE > > ide-cs driver rather than the pata pcmcia driver. > > > > I don't recall whether the pata pcmcia driver was a problem or not, > > as the PCMCIA interface can't cope with _any_ 32-bit accesses. I > > think PATA tries to use the "highest" possible access size by > > default... > > It doesn't actually - it defaults to 16-bits for PIO data access and > you must explicitly enable 32-bits using ATA_PFLAG_PIO32 port flag > (pata_pcmcia doesn't set it so it should be okay). Also taskfile > registers are accessed using 8-bits access by default transport > functions (which are used by pata_pcmcia). Please also note that: - assebet_defconfig currently doesn't even enable ide-cs (CONFIG_BLK_DEV_IDECS) in the mainline kernel - neponset_defconfig doesn't even enable IDE (CONFIG_IDE) in the mainline kernel so there is no risk of breaking anything.. * 'v4.9-rc2-arm-configs-pata' of https://github.com/bzolnier/linux: arm: spitz_defconfig: convert to use libata PATA drivers arm: s3c2410_defconfig: convert to use libata PATA drivers arm: netwinder_defconfig: convert to use libata PATA drivers arm: jornada720_defconfig: convert to use libata PATA drivers arm: ixp4xx_defconfig: convert to use libata PATA drivers arm: h3600_defconfig: convert to use libata PATA drivers arm: corgi_defconfig: convert to use libata PATA drivers arm: am200epdkit_defconfig: convert to use libata PATA drivers arm: omap1_defconfig: convert to use libata PATA drivers arm: collie_defconfig: convert to use libata PATA drivers arm: shannon_defconfig: disable IDE subsystem arm: mainstone_defconfig: disable IDE subsystem arm: lart_defconfig: disable IDE subsystem arm: cerfcube_defconfig: disable IDE subsystem arm: badge4_defconfig: disable IDE subsystem arm: assabet_defconfig: disable IDE subsystem
2016-11-22ARM: davinci_all_defconfig: Enable OHCI as moduleAxel Haslam
Enable the davinci ohci driver as a module for usb tested with the omap138-lcdk board. Signed-off-by: Axel Haslam <ahaslam@baylibre.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2016-11-21Merge tag 'bcm2835-defconfig-next-2016-11-18' into defconfig/nextFlorian Fainelli
This pull request enables the BCM2835 (Raspberry Pi) thermal driver in the Pi1 defconfig. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2016-11-21mfd: qcom-pm8xxx: Clean up PM8XXX namespaceLinus Walleij
The Kconfig and file naming for the PM8xxx driver is totally confusing: - Kconfig options MFD_PM8XXX and MFD_PM8921_CORE, some in-kernel users depending on or selecting either at random. - A driver file named pm8921-core.c even if it is indeed used by the whole PM8xxx family of chips. - An irqchip named pm8xxx since it was (I guess) realized that the driver was generic for all pm8xxx PMICs. As I may want to add support for PM8901 this is starting to get really messy. Fix this situation by: - Remove the MFD_PM8921_CORE symbol and rely solely on MFD_PM8XXX and convert all users, including LEDs Kconfig and ARM defconfigs for qcom and multi_v7 to use that single symbol. - Renaming the driver to qcom-pm8xxx.c to fit along the two other qcom* prefixed drivers. - Rename functions withing the driver from 8921 to 8xxx to indicate it is generic. - Just drop the =m config from the pxa_defconfig, I have no clue why it is even there, it is not a Qualcomm platform. (Possibly older Kconfig noise from saveconfig.) Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Abhijeet Dharmapurikar <adharmap@codeaurora.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Andy Gross <andy.gross@linaro.org> Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Acked-by: Jacek Anaszewski <j.anaszewski@samsung.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-11-18Merge tag 'tegra-for-4.10-arm-defconfig' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/defconfig ARM: tegra: Default configuration updates for v4.10-rc1 Enable audio support for various Toradex devices as well as the GMI. * tag 'tegra-for-4.10-arm-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: ARM: tegra: Enable GMI driver in default configuration ARM: tegra: Enable SGTL5000 audio ARM: tegra: Update default configuration for v4.9-rc1 Signed-off-by: Olof Johansson <olof@lixom.net>
2016-11-18Merge tag 'omap-for-v4.10/defconfig-signed' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/defconfig Defconfig changes for omaps for v4.10 merge window: - Enable tsc2004 touchscreen as a loadable module - Enable REGULATOR_GPIO, dra71-evm needs this for MMC voltage - Enable LP873x PMICs for dra71x-evm - Run make savedefconfig to save some space and make it easier to generate minimal patches against it * tag 'omap-for-v4.10/defconfig-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: omap2plus_defconfig: Run make savedefconfig to save some space ARM: omap2plus_defconfig: Enable LP873X support ARM: omap2plus_defconfig: Enable REGULATOR_GPIO ARM: omap2plus_defconfig: Enable TOUCHSCREEN_TSC2004 Signed-off-by: Olof Johansson <olof@lixom.net>
2016-11-18Merge tag 'sunxi-defconfig-for-4.10' of ↵Olof Johansson
https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into next/defconfig Allwinner defconfig changes for 4.10 Two patches to enable the dumb VGA bridges in the multi_v7 and sunxi defconfig. * tag 'sunxi-defconfig-for-4.10' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux: ARM: multi_v7: enable VGA bridge ARM: sunxi: Enable VGA bridge Signed-off-by: Olof Johansson <olof@lixom.net>
2016-11-18Merge tag 'imx-defconfig-4.10' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/defconfig i.MX defconfig updates for 4.10: - Increase CMA size to 64 MiB, so that we can use etnaviv driver with 1920x1080 display devices. - Enable ES8328 codec driver support, which is required by Kosagi Novena boards. * tag 'imx-defconfig-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: imx_v6_v7_defconfig: Select the es8328 codec driver ARM: imx_v6_v7_defconfig: Increase CMA size Signed-off-by: Olof Johansson <olof@lixom.net>
2016-11-18ARM: defconfig: turn on the DT cpufreq for IntegratorLinus Walleij
The Integrators are now migrated to handle the CPUfreq scaling using the generic devicetree CPUfreq driver using the common clock framework and have the required device tree modifications, so turn off the old driver and turn on the new generic driver. Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Cc: Viresh Kumar <viresh.kumar@linaro.org> Cc: Russell King <linux@armlinux.org.uk> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2016-11-17Merge tag 'qcom-defconfig-for-4.10' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into next/defconfig Qualcomm ARM Based defconfig Updates for v4.10 * Fixup MDM9615 option names * tag 'qcom-defconfig-for-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux: ARM: qcom_defconfig: Fix MDM9515 LCC and GCC config Signed-off-by: Olof Johansson <olof@lixom.net>
2016-11-17Merge tag 'socfpga_defconfig_updates_for_v4.10' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into next/defconfig SoCFPGA defconfig updates for v4.10 - enable QSPI, HIGHMEM, FPGA bridge and device-tree overlays - enable AUTOFS4 and NFS file system support * tag 'socfpga_defconfig_updates_for_v4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux: ARM: socfpga_defconfig: enable FS configs to support Angstrom filesystem ARM: socfpga: updates for socfpga_defconfig ARM: socfpga_defconfig: Enable HIGHMEM ARM: socfpga: defconfig: enable qspi Signed-off-by: Olof Johansson <olof@lixom.net>
2016-11-17Merge branch 'sti-defconfig-for-4.10-round2' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/pchotard/sti into next/defconfig * 'sti-defconfig-for-4.10-round2' of git://git.kernel.org/pub/scm/linux/kernel/git/pchotard/sti: ARM: multi_v7_defconfig: Remove ST_THERMAL_SYSCFG Kconfig symbol Signed-off-by: Olof Johansson <olof@lixom.net>
2016-11-17Merge tag 'samsung-defconfig-4.10' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/defconfig Samsung defconfig update for v4.10: 1. Enable the Exynos gscaler driver on multi_v7 and exynos defconfigs. * tag 'samsung-defconfig-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: ARM: multi_v7_defconfig: Enable exynos-gsc driver as module ARM: exynos_defconfig: Enable exynos-gsc driver as module Signed-off-by: Olof Johansson <olof@lixom.net>
2016-11-15ARM: omap2plus_defconfig: Run make savedefconfig to save some spaceTony Lindgren
This shrinks down omap2plus_defconfig a bit and makes it easier for people to generate minimal patches against it. Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-11-15ARM: davinci_all_defconfig: add missing options for systemdSekhar Nori
Some kernel configuration options required for systemd support are missing in davinci_all_defconfig. Add them. This is based on recommendations in: http://cgit.freedesktop.org/systemd/systemd/tree/README Options which kernel enables by default (and will thus be removed upon next savedefconfig update) are not included. Tested on OMAP-L138 LCDK board with fully up to date armv5 archlinux filesystem. Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2016-11-15ARM: davinci_all_defconfig: enable the mstpri and ddrctl driversBartosz Golaszewski
With the da8xx memory controller and master peripheral priority drivers merged and corresponding device tree changes in place we can now enable appropriate options by default. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2016-11-11ARM: bcm2835: add thermal driver to default configMartin Sperl
Add the thermal driver to list of compiled modules in the default config for bcm2835. Signed-off-by: Martin Sperl <kernel@martin.sperl.org> Reviewed-by: Eric Anholt <eric@anholt.net> Signed-off-by: Eric Anholt <eric@anholt.net>
2016-11-09ARM: omap2plus_defconfig: Enable LP873X supportLokesh Vutla
LP873X family of PMICs are used in dra71x-evm, So enable the same. Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-11-09ARM: omap2plus_defconfig: Enable REGULATOR_GPIOLokesh Vutla
GPIO regulator is used on dra71-evm platform to control MMCSD IO voltage Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-11-09ARM: omap2plus_defconfig: Enable TOUCHSCREEN_TSC2004Adam Ford
The LogicPD DM3730 Torpedo and SOM-LV devices have the TI TSC2004 touchscreen controller. Enable the related driver as a module. Signed-off-by: Adam Ford <aford173@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-11-09ARM: socfpga_defconfig: enable FS configs to support Angstrom filesystemDinh Nguyen
systemd on the Angstrom root file system expects AUTOFS to be configured as a module and NFSD to be statically linked into the kernel. This patch adds the necessary configuration to get rid two "FAILED" error messages during systemd startup. Signed-off-by: Matthew Gerlach <mgerlach@opensource.altera.com> Signed-off-by: Dinh Nguyen <dinguyen@kernel.org> --- v2: provide a more descriptive changelog
2016-11-08ARM: config: Enable GPIO Key driver in stm32_defconfigMaxime Coquelin
Signed-off-by: Maxime Coquelin <mcoquelin.stm32@gmail.com> Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2016-11-08Merge tag 'davinci-for-v4.10/defconfig' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into next/defconfig Some updates to davinci_all_defconfig for MMC, LCDC and GPIO/LEDs. * tag 'davinci-for-v4.10/defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci: ARM: davinci_all_defconfig: enable LED default-on trigger ARM: davinci_all_defconfig: build MMC into kernel ARM: davinci_all_defconfig: enable gpio poweroff driver ARM: davinci_all_defconfig: enable LCDC DRM driver Signed-off-by: Olof Johansson <olof@lixom.net>
2016-11-08ARM: tegra: Enable GMI driver in default configurationThierry Reding
Enable the new Tegra GMI driver for the default configuration. Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-11-08ARM: tegra: Enable SGTL5000 audioMarcel Ziswiler
The NVIDIA Tegra 3 aka T30 based Apalis T30 and Colibri T30 as well as the new Tegra K1 aka TK1 based Apalis TK1 modules contain a Freescale SGTL5000 analogue audio codec. Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-11-08ARM: tegra: Update default configuration for v4.9-rc1Thierry Reding
Regenerate the default configuration on top of v4.9-rc1. This shuffles around a couple of symbols and drops some that have become defaults or which were dropped. Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-11-07Merge tag 'renesas-defconfig-for-v4.10' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/defconfig Renesas ARM Based SoC Defconfig Updates for v4.10 * Enable cgroups in shmobile_defconfig * tag 'renesas-defconfig-for-v4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: ARM: shmobile: defconfig: Enable CONFIG_CGROUPS Signed-off-by: Olof Johansson <olof@lixom.net>
2016-11-02ARM: socfpga: updates for socfpga_defconfigAlan Tull
This patch enables the following in the socfpga_defconfig: +CONFIG_OF_OVERLAY=y Enable support for Device Tree Overlays +CONFIG_FPGA_REGION=y Enable device tree overlay support for FPGA programming +CONFIG_FPGA_MGR_SOCFPGA_A10=y Enable partial reconfiguration for Altera Arria 10 FPGA +CONFIG_FPGA_BRIDGE=y Enable the FPGA Bridges framework +CONFIG_SOCFPGA_FPGA_BRIDGE=y Enable support for SoCFPGA hardware bridges +CONFIG_ALTERA_FREEZE_BRIDGE=y Enable support for the Altera Soft IP Freeze bridges Signed-off-by: Alan Tull <atull@opensource.altera.com>
2016-11-01ARM: davinci_all_defconfig: enable LED default-on triggerDavid Lechner
The LEDs default-on trigger is nice to have. For example, it can be used to configure a LED as a power indicator. Signed-off-by: David Lechner <david@lechnology.com> [nsekhar@ti.com: build as module, subject line fixes] Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2016-11-01ARM: davinci_all_defconfig: build MMC into kernelDavid Lechner
This changes the davinci default configuration to build the davinci MMC driver into the kernel. This allows booting from an SD card without requiring an initrd containing the kernel module. Signed-off-by: David Lechner <david@lechnology.com> [nsekhar@ti.com: minor commit message adjustments] Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2016-11-01ARM: davinci_all_defconfig: enable gpio poweroff driverDavid Lechner
The gpio-poweroff driver is needed by LEGO MINDSTORMS EV3 (AM1808 based board). Signed-off-by: David Lechner <david@lechnology.com> [nsekhar@ti.com: subject line adjustment] Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2016-11-01ARM: davinci_all_defconfig: enable LCDC DRM driverBartosz Golaszewski
With the device tree changes for tilcdc in place, we can now enable the driver by default in the davinci_all defconfig file. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2016-10-27Merge tag 'sti-defconfig-for-4.10' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/pchotard/sti into next/defconfig Remove STiH415/416 specific IPs As STiH415/416 have been removed from kernel, remove IPs only found on these socs, remove CONFIG_PHY_MIPHY365X and CONFIG_PHY_STIH41X_USB. * tag 'sti-defconfig-for-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/pchotard/sti: ARM: multi_v7_defconfig: Remove stih41x phy Kconfig symbol. ARM: multi_v7_defconfig: Remove miphy365 phy Kconfig symbol. Signed-off-by: Olof Johansson <olof@lixom.net>
2016-10-27ARM: defconfig: update U8500 defconfigLinus Walleij
Some config options like perf events and PM are now implicit, we have an upstream driver for the AK8974, and we really want the HRTIMER software triggers from configfs with some of the sensors. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2016-10-26arm: spitz_defconfig: convert to use libata PATA driversBartlomiej Zolnierkiewicz
IDE subsystem has been deprecated since 2009 and the majority (if not all) of Linux distributions have switched to use libata for ATA support exclusively. However there are still some users (mostly old or/and embedded non-x86 systems) that have not converted from using IDE subsystem to libata PATA drivers. This doesn't seem to be good thing in the long-term for Linux as while there is less and less PATA systems left in use: * testing efforts are divided between two subsystems * having duplicate drivers for same hardware confuses users This patch converts spitz_defconfig to use libata PATA drivers. Cc: Daniel Mack <daniel@zonque.org> Cc: Haojian Zhuang <haojian.zhuang@gmail.com> Cc: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
2016-10-26arm: s3c2410_defconfig: convert to use libata PATA driversBartlomiej Zolnierkiewicz
IDE subsystem has been deprecated since 2009 and the majority (if not all) of Linux distributions have switched to use libata for ATA support exclusively. However there are still some users (mostly old or/and embedded non-x86 systems) that have not converted from using IDE subsystem to libata PATA drivers. This doesn't seem to be good thing in the long-term for Linux as while there is less and less PATA systems left in use: * testing efforts are divided between two subsystems * having duplicate drivers for same hardware confuses users This patch converts s3c2410_defconfig to use libata PATA drivers. Cc: Kukjin Kim <kgene@kernel.org> Cc: Krzysztof Kozlowski <k.kozlowski@samsung.com> Cc: linux-samsung-soc@vger.kernel.org Cc: Ben Dooks <ben.dooks@codethink.co.uk> Cc: Vincent Sanders <vince@simtec.co.uk> Cc: Simtec Linux Team <linux@simtec.co.uk> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
2016-10-26arm: netwinder_defconfig: convert to use libata PATA driversBartlomiej Zolnierkiewicz
IDE subsystem has been deprecated since 2009 and the majority (if not all) of Linux distributions have switched to use libata for ATA support exclusively. However there are still some users (mostly old or/and embedded non-x86 systems) that have not converted from using IDE subsystem to libata PATA drivers. This doesn't seem to be good thing in the long-term for Linux as while there is less and less PATA systems left in use: * testing efforts are divided between two subsystems * having duplicate drivers for same hardware confuses users This patch converts netwinder_defconfig to use libata PATA drivers. Cc: Russell King <linux@arm.linux.org.uk> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
2016-10-26arm: jornada720_defconfig: convert to use libata PATA driversBartlomiej Zolnierkiewicz
IDE subsystem has been deprecated since 2009 and the majority (if not all) of Linux distributions have switched to use libata for ATA support exclusively. However there are still some users (mostly old or/and embedded non-x86 systems) that have not converted from using IDE subsystem to libata PATA drivers. This doesn't seem to be good thing in the long-term for Linux as while there is less and less PATA systems left in use: * testing efforts are divided between two subsystems * having duplicate drivers for same hardware confuses users This patch converts jornada720_defconfig to use libata PATA drivers. Cc: Kristoffer Ericson <kristoffer.ericson@gmail.com> Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
2016-10-26arm: ixp4xx_defconfig: convert to use libata PATA driversBartlomiej Zolnierkiewicz
IDE subsystem has been deprecated since 2009 and the majority (if not all) of Linux distributions have switched to use libata for ATA support exclusively. However there are still some users (mostly old or/and embedded non-x86 systems) that have not converted from using IDE subsystem to libata PATA drivers. This doesn't seem to be good thing in the long-term for Linux as while there is less and less PATA systems left in use: * testing efforts are divided between two subsystems * having duplicate drivers for same hardware confuses users This patch converts ixp4xx_defconfig to use libata PATA drivers. Cc: Imre Kaloz <kaloz@openwrt.org> Cc: Krzysztof Halasa <khalasa@piap.pl> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
generated by cgit (git 2.34.1) at 2025-04-15 06:49:17 +0000