summaryrefslogtreecommitdiff
path: root/arch/arm/configs
AgeCommit message (Collapse)Author
2017-05-18ARM: configs: add a gemini defconfigLinus Walleij
It makes sense to have a stripped-down defconfig for just Gemini, as it is a pretty small platform used in NAS etc, and will use appended device tree. It is also quick to compile and test. Hopefully this defconfig can be a good base for distributions such as OpenWRT. I plan to add in the config options needed for the different variants of Gemini as we go along. Cc: Janos Laube <janos.dev@gmail.com> Cc: Paulius Zaleckas <paulius.zaleckas@gmail.com> Cc: Hans Ulli Kroll <ulli.kroll@googlemail.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2017-05-09Merge tag 'armsoc-defconfig' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM: SoC defconfig updates from Olof Johansson: "We've traditionally kept defconfig updates in a separate branch, often to encourage submaintainers to handle those patches separately to avoid conflicts on the shared files. The amount of changes seem to be decreasing though, so we might rethink how we handle this going forward. There really isn't much to write about here. The bulk of changes here are enabling drivers for whatever platforms the hardware is found on (and multi-configs)" * tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (30 commits) multi_v7_defconfig: make Rockchip usb2-phy built-in ARM: omap2plus_defconfig: Enable droid 4 devices ARM: omap2plus_defconfig: Add QMI, ACM and PPP as loadable modules ARM: configs: aspeed: Add new drivers ARM: configs: aspeed: Update configs for BMC systems ARM: omap2plus_defconfig: Enable TI Ethernet PHY ARM: configs: Add new config fragment to change RAM start point ARM: configs: stm32: Add I2C support multi_v7_defconfig: make Rockchip DRM drivers built-in ARM: configs: stm32: Set CPU_V7M_NUM_IRQ to max value ARM: imx_v6_v7_defconfig: Select SMSC_PHY ARM: davinci_all_defconfig: convert to use libata PATA ARM: qcom_defconfig: Enable Qualcomm remoteproc and related drivers ARM: omap2plus_defconfig: enable ahci-dm816 module arm: set CONFIG_MMC_BCM2835=y in bcm2835_defconfig and multi_v7_defconfig ARM: bcm2835: Enable missing CMA settings for VC4 driver ARM: socfpga: updates for socfpga_defconfig ARM: imx_v6_v7_defconfig: Select hid-multitouchdriver ARM: imx_v6_v7_defconfig: Select max11801_ts touchscreen driver ARM: exynos_defconfig: Increase CONFIG_CMA_SIZE_MBYTES to 96 ...
2017-05-02Merge branch 'linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto updates from Herbert Xu: "Here is the crypto update for 4.12: API: - Add batch registration for acomp/scomp - Change acomp testing to non-unique compressed result - Extend algorithm name limit to 128 bytes - Require setkey before accept(2) in algif_aead Algorithms: - Add support for deflate rfc1950 (zlib) Drivers: - Add accelerated crct10dif for powerpc - Add crc32 in stm32 - Add sha384/sha512 in ccp - Add 3des/gcm(aes) for v5 devices in ccp - Add Queue Interface (QI) backend support in caam - Add new Exynos RNG driver - Add ThunderX ZIP driver - Add driver for hardware random generator on MT7623 SoC" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (101 commits) crypto: stm32 - Fix OF module alias information crypto: algif_aead - Require setkey before accept(2) crypto: scomp - add support for deflate rfc1950 (zlib) crypto: scomp - allow registration of multiple scomps crypto: ccp - Change ISR handler method for a v5 CCP crypto: ccp - Change ISR handler method for a v3 CCP crypto: crypto4xx - rename ce_ring_contol to ce_ring_control crypto: testmgr - Allow ecb(cipher_null) in FIPS mode Revert "crypto: arm64/sha - Add constant operand modifier to ASM_EXPORT" crypto: ccp - Disable interrupts early on unload crypto: ccp - Use only the relevant interrupt bits hwrng: mtk - Add driver for hardware random generator on MT7623 SoC dt-bindings: hwrng: Add Mediatek hardware random generator bindings crypto: crct10dif-vpmsum - Fix missing preempt_disable() crypto: testmgr - replace compression known answer test crypto: acomp - allow registration of multiple acomps hwrng: n2 - Use devm_kcalloc() in n2rng_probe() crypto: chcr - Fix error handling related to 'chcr_alloc_shash' padata: get_next is never NULL crypto: exynos - Add new Exynos RNG driver ...
2017-05-01Merge tag 'edac_for_4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bpLinus Torvalds
Pull EDAC updates from Borislav Petkov: - an EDAC driver for Cavium ThunderX RAS IP (Sergey Temerkhanov) - removal of DRAM error reporting through PCI SERR NMI (Borislav Petkov) - misc small fixes (Jan Glauber, Thor Thayer) * tag 'edac_for_4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp: EDAC, ghes: Do not enable it by default EDAC: Rename report status accessors EDAC: Delete edac_stub.c EDAC: Update Kconfig help text EDAC: Remove EDAC_MM_EDAC EDAC: Issue tracepoint only when it is defined ACPI/extlog: Add EDAC dependency EDAC: Move edac_op_state to edac_mc.c EDAC: Remove edac_err_assert EDAC: Get rid of edac_handlers x86/nmi, EDAC: Get rid of DRAM error reporting thru PCI SERR NMI EDAC, highbank: Align Makefile directives EDAC, thunderx: Remove unused code EDAC, thunderx: Change LMC index calculation EDAC, altera: Fix peripheral warnings for Cyclone5 EDAC, thunderx: Fix L2C MCI interrupt disable EDAC, thunderx: Add Cavium ThunderX EDAC driver
2017-04-19Merge tag 'aspeed-4.12-defconfig' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed into next/defconfig Aspeed defconfig updates for 4.12 Add newly unstreamed drivers to the defconfigs for the Aspeed SoCs. The defconfigs are reworked to be useful for development and testing of OpenBMC on these systems. * tag 'aspeed-4.12-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed: ARM: configs: aspeed: Add new drivers ARM: configs: aspeed: Update configs for BMC systems ARM: aspeed: Add CONFIG_SPI_ASPEED_SMC Signed-off-by: Olof Johansson <olof@lixom.net>
2017-04-19Merge tag 'omap-for-v4.12/defconfig-signed' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/defconfig Defconfig updates for omaps for v4.12 merge window. Mostly to update to use new ti-cpufreq driver, the rest is just to enable drivers found on various devices: - Update to use ti-cpufreq driver that we now have - Enable SATA for ti81xx as a loadable module - Enable Ethernet PHY for DP83848 - Enable modem related modules for PPP, QMI and USB ACM as loadable modules - Enable droid 4 related drivers as lodable modules except for PMIC and regulator so eMMC can be used for root * tag 'omap-for-v4.12/defconfig-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: omap2plus_defconfig: Enable droid 4 devices ARM: omap2plus_defconfig: Add QMI, ACM and PPP as loadable modules ARM: omap2plus_defconfig: Enable TI Ethernet PHY ARM: omap2plus_defconfig: enable ahci-dm816 module ARM: omap2plus_defconfig: Enable support for ti-cpufreq Signed-off-by: Olof Johansson <olof@lixom.net>
2017-04-19Merge tag 'imx-defconfig-4.12' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/defconfig i.MX defconfig updates for 4.12: - Enable MAX11801 and HID_MULTITOUCH touch drivers. - Enable SMSC_PHY driver, as imx6sl-evk board has a LAN8720A ethernet phy supported by it. * tag 'imx-defconfig-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: imx_v6_v7_defconfig: Select SMSC_PHY ARM: imx_v6_v7_defconfig: Select hid-multitouchdriver ARM: imx_v6_v7_defconfig: Select max11801_ts touchscreen driver Signed-off-by: Olof Johansson <olof@lixom.net>
2017-04-19Merge tag 'samsung-defconfig-4.12' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/defconfig Samsung defconfig ARM update for v4.12: 1. Enable DYNAMIC_DEBUG because it is useful for debugging. 2. Increase CMA memory region to allow handling H.264 1080p videos. * tag 'samsung-defconfig-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: ARM: exynos_defconfig: Increase CONFIG_CMA_SIZE_MBYTES to 96 ARM: exynos_defconfig: Enable DYNAMIC_DEBUG and get rid of old ext3 Signed-off-by: Olof Johansson <olof@lixom.net>
2017-04-19Merge tag 'qcom-defconfig-for-4.12' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into next/defconfig Qualcomm ARM Based defconfig Updates for v4.12 * Enable QCOM remoteproc and related drivers * tag 'qcom-defconfig-for-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux: ARM: qcom_defconfig: Enable Qualcomm remoteproc and related drivers Signed-off-by: Olof Johansson <olof@lixom.net>
2017-04-19Merge tag 'sunxi-defconfig-for-4.12' of ↵Olof Johansson
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/defconfig Allwinner defconfig changes for 4.12 Some patches to enable new modules in the defconfig. * tag 'sunxi-defconfig-for-4.12' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: ARM: multi_v7_defconfig: Switch AXP20x driver from module to built-in ARM: multi_v7_defconfig: Enable AC100 RTC driver ARM: multi_v7_defconfig: Switch sunxi RSB driver from module to built-in ARM: sunxi_defconfig: Enable AC100 RTC driver Signed-off-by: Olof Johansson <olof@lixom.net>
2017-04-19Merge tag 'socfpga_defconfig_updates_for_v4.12' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into next/defconfig SoCFPGA defconfig updates for v4.12 - enables TSE(Triple-Speed-Ethernet) support * tag 'socfpga_defconfig_updates_for_v4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux: ARM: socfpga: updates for socfpga_defconfig Signed-off-by: Olof Johansson <olof@lixom.net>
2017-04-19Merge tag 'davinci-for-v4.12/defconfig-2' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into next/defconfig Shift to the newly introduced PalmChip PATA driver for DaVinci. * tag 'davinci-for-v4.12/defconfig-2' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci: ARM: davinci_all_defconfig: convert to use libata PATA Signed-off-by: Olof Johansson <olof@lixom.net>
2017-04-19Merge tag 'stm32-defconfig-for-v4.12-1' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into next/defconfig STM32 defconfig updates for v4.12, round 1. Highlights: ---------- - Enable I2C - Add config fragment for RAM start point * tag 'stm32-defconfig-for-v4.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: ARM: configs: Add new config fragment to change RAM start point ARM: configs: stm32: Add I2C support Signed-off-by: Olof Johansson <olof@lixom.net>
2017-04-19multi_v7_defconfig: make Rockchip usb2-phy built-inHeiko Stuebner
The phy is necessary for the dwc2 controllers driving the usb ports on all arm32 Rockchip socs. Both the dwc2 as well as usb downstream drivers (mass-storage as well as usb networking) are already built-in, so only the phy is missing to allow booting from usb-devices without to much hassle. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Olof Johansson <olof@lixom.net>
2017-04-10ARM: omap2plus_defconfig: Enable droid 4 devicesTony Lindgren
We only need to have MFD_CPCAP and CPCAP_REGULATOR as built-in to be able to mount root on the eMMC. And then POWER_RESET_GPIO is good to have built-in. The rest of the devices can be loadable modules. This gets various devices such as regulators, touchscreen, power button, HDMI audio, LEDs, RTC, and ADC working. Note that omapdrm needs to be configured manually as we're still using omapfb by default. Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-04-10ARM: omap2plus_defconfig: Add QMI, ACM and PPP as loadable modulesTony Lindgren
We have devices with modems connected, so let's make them usable. Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-04-10EDAC: Remove EDAC_MM_EDACBorislav Petkov
Move all the EDAC core functionality behind CONFIG_EDAC and get rid of that indirection. Update defconfigs which had it. While at it, fix dependencies such that EDAC depends on RAS for the tracepoints. Signed-off-by: Borislav Petkov <bp@suse.de> Cc: linux-arm-kernel@lists.infradead.org Cc: linuxppc-dev@lists.ozlabs.org Cc: Chris Metcalf <cmetcalf@mellanox.com> Cc: linux-edac@vger.kernel.org
2017-04-07ARM: configs: aspeed: Add new driversJoel Stanley
- LPC Host Controller - Pulse Width Modulation and Tachometer - Analog to Digital converter These three new drivers for the Aspeed SoCs will appear in 4.12. This defconfig is based on next-20170406. Signed-off-by: Joel Stanley <joel@jms.id.au>
2017-04-07ARM: configs: aspeed: Update configs for BMC systemsJoel Stanley
Developers can develop and users can test with this config against an OpenBMC userspace. It turns off debugging features to ensure network performance is high. Tested-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2017-04-05ARM: configs: stm32: Add crypto supportFabien DESSENNE
Add STM32 crypto support in stm32_defconfig file. Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-04-04ARM: omap2plus_defconfig: Enable TI Ethernet PHYRoger Quadros
DP83848_PHY i.e. [TI TLK10X 10/100 Mbps PHY] is used on the am335x-icev2 board. Enable the PHY driver for it. Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-03-31ARM: configs: Add new config fragment to change RAM start pointAlexandre TORGUE
Add a new fragment to over-ride the RAM start point to 0xd0000000. Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com>
2017-03-31ARM: configs: stm32: Add I2C supportM'boumba Cedric Madianga
This patch adds I2C support for STM32 default configuration Signed-off-by: M'boumba Cedric Madianga <cedric.madianga@gmail.com> Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com>
2017-03-31multi_v7_defconfig: make Rockchip DRM drivers built-inArnd Bergmann
These cause warnings in linux-next, as the symbols have become 'bool' there: arch/arm/configs/multi_v7_defconfig:600:warning: symbol value 'm' invalid for ROCKCHIP_INNO_HDMI arch/arm/configs/multi_v7_defconfig:599:warning: symbol value 'm' invalid for ROCKCHIP_DW_MIPI_DSI arch/arm/configs/multi_v7_defconfig:598:warning: symbol value 'm' invalid for ROCKCHIP_DW_HDMI arch/arm/configs/multi_v7_defconfig:597:warning: symbol value 'm' invalid for ROCKCHIP_ANALOGIX_DP Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2017-03-31Merge tag 'arm-soc/for-4.12/defconfig' of ↵Arnd Bergmann
http://github.com/Broadcom/stblinux into next/defconfig Pull "Broadcom defconfig changes for 4.12" from Florian Fainelli: This pull request contains Broadcom ARM-based SoCs defconfig updates for 4.12, please pull the following: - Gerd enables the BCM2835 MMC driver which yields better performance than the default one (iProc) * tag 'arm-soc/for-4.12/defconfig' of http://github.com/Broadcom/stblinux: arm: set CONFIG_MMC_BCM2835=y in bcm2835_defconfig and multi_v7_defconfig ARM: bcm2835: Enable missing CMA settings for VC4 driver
2017-03-30Merge tag 'davinci-for-v4.12/defconfig' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into next/defconfig Pull "DaVinci defconfig updates for v4.12" from Sekhar Nori: DaVinci defconfig updates for enabling Video capture and display on DA850 and an ADC driver thats used by Lego EV3. * tag 'davinci-for-v4.12/defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci: ARM: davinci_all_defconfig: Enable TI ADS7950 ARM: davinci_all_defconfig: enable IRQ support for pca953x ARM: davinci_all_defconfig: enable VPIF display modules
2017-03-30ARM: configs: stm32: Set CPU_V7M_NUM_IRQ to max valueAlexandre TORGUE
stm32_defconfig is used for several STM32 MCU: STM32F429, STM32F469, STM32F746 and now STM32H743. Each of MCU listed have different interrupts number mapped on NVIC. STM32F429: 81, STM32F469: 92, STM32F746: 97 and STM32H743: 149. I could set CPU_V7M_NUM_IRQ to 149 but in order to avoid forgetting to update this value for next STM32 MCU I prefer to set it to max value: 240. Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2017-03-30ARM: imx_v6_v7_defconfig: Select SMSC_PHYLeonard Crestez
The imx6sl-evk board has a LAN8720A ethernet phy supported by SMSC_PHY. Add this driver to the default imx config since the device is present on one of the evaluation boards. This used to work mostly fine with the generic phy driver until commit 0878fff1f42c ("net: phy: Do not perform software reset for Generic PHY"). The fact that soft reset is no longer performed apparently causes RX to sometimes failes which can cause netboot to timeout on DHCP. This is eventually retried and it works after link up/down but can takes 90 seconds to reach the login prompt. This was generated with "make savedefconfig" and it includes a few additional minor cleanups. Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Fugang Duan <fugang.duan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-03-30ARM: davinci_all_defconfig: convert to use libata PATASekhar Nori
IDE subsystem has been deprecated since 2009 and the majority (if not all) of Linux distributions have switched to use libata for ATA support exclusively. However there are still some users (mostly old or/and embedded non-x86 systems) that have not converted from using IDE subsystem to libata PATA drivers. This doesn't seem to be good thing in the long-term for Linux as while there is less and less PATA systems left in use: * testing efforts are divided between two subsystems * having duplicate drivers for same hardware confuses users This patch converts davinci_all_defconfig to use libata PATA drivers. Signed-off-by: Sekhar Nori <nsekhar@ti.com> [b.zolnierkie: split from bigger patch + added patch description] Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
2017-03-28ARM: qcom_defconfig: Enable Qualcomm remoteproc and related driversJonathan Neuschäfer
An adsp-pil node is present in at least the MSM8974 SoC. Simply enable all Qualcomm remoteproc drivers to avoid more work in the future. The SMP2P driver is required for adsp-pil to initialize correctly. Enable the SMSM driver at Bjorn Andersson's request: "We also need CONFIG_QCOM_SMSM=y here, its currently used to signal state of the ring buffers for WiFi." CONFIG_QCOM_WCNSS_CTRL is required to load firmware/configuration data into the WCNSS core, which handles WiFi and Bluetooth. Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2017-03-23ARM: omap2plus_defconfig: enable ahci-dm816 moduleBartosz Golaszewski
This is now supported on the dm8168-evm board, so enable it in the defconfig for omap2+. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-03-17arm: set CONFIG_MMC_BCM2835=y in bcm2835_defconfig and multi_v7_defconfigGerd Hoffmann
We need to enable this controller so that we can switch the SD card's pinmux over to it by default, which will improve storage performance. Read access (dd with 64k blocks on rpi2): CONFIG_MMC_SDHCI_IPROC: 11-12 MB/s CONFIG_MMC_BCM2835: 19-20 MB/s Differences on write access are pretty much in the noise. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Eric Anholt <eric@anholt.net>
2017-03-16ARM: bcm2835: Enable missing CMA settings for VC4 driverStefan Wahren
Currently bcm2835_defconfig has CMA disabled which makes the HDMI output on a Raspberry Pi 1 stop working during boot: fb: switching to vc4drmfb from simple Console: switching to colour dummy device 80x30 [drm] Initialized vc4 0.0.0 20140616 for soc:gpu on minor 0 [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [drm] Driver supports precise vblank timestamp query. vc4-drm soc:gpu: failed to allocate buffer with size 9216000 vc4-drm soc:gpu: Failed to set initial hw configuration. So enable CMA and DMA_CMA in bcm2835_defconfig. Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Fixes: 4400d9ac05ee ("ARM: bcm2835: Enable the VC4 graphics driver in the defconfig") Reviewed-by: Eric Anholt <eric@anholt.net>
2017-03-16ARM: socfpga: updates for socfpga_defconfigJia Jie Ho
This patch enables Altera TSE support in socfpga_defconfig Signed-off-by: Jia Jie Ho <ho.jia.jie@intel.com> Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
2017-03-16ARM: imx_v6_v7_defconfig: Select hid-multitouchdriverJagan Teki
Select CONFIG_HID_MULTITOUCH so that we can have multi touchscreen funtionality via USB by default on Engicam i.CoreM6 Quad with OpenFrame Cap 10.1 display boards. Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Cc: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2017-03-16ARM: imx_v6_v7_defconfig: Select max11801_ts touchscreen driverJagan Teki
Select CONFIG_TOUCHSCREEN_MAX11801 so that we can have touchscreen funtionality by default on Engicam i.CoreM6 Quad boards. Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Cc: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2017-03-07ARM: exynos_defconfig: Increase CONFIG_CMA_SIZE_MBYTES to 96Shuah Khan
Current CMA size of 64 Mbytes is right on the edge of being small when several drivers need to allocate large CMA buffers. For example, if the s5p-mfc driver needs to pre-allocate CMA memory to decode a H.264 1080p video, then there won't be enough CMA memory left for other drivers, such as the exynos-drm driver that may need to allocate GEM buffers for the display manager. Increasing CMA size to 96 Mbytes in exynos_defconfig addresses use-cases such as these. Suggested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2017-03-07ARM: exynos_defconfig: Enable DYNAMIC_DEBUG and get rid of old ext3Krzysztof Kozlowski
DYNAMIC_DEBUG is quite useful for debugging kernels and should not cause noticeable performance regressions. It makes the kernel bigger (around 4%) but this difference should not impact typical developer and reference usage of this defconfig. Sizes: zImage-old: 4641496 bytes zImage-new: 4811384 bytes text data bss dec hex filename 7031229 2570916 327016 9929161 9781c9 vmlinux-old 7205921 2800052 327016 10332989 9dab3d vmlinux-new Additionally, remove the EXT3_FS symbol because it is entirely replaced by EXT4_FS. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
2017-03-07ARM: davinci_all_defconfig: Enable TI ADS7950David Lechner
This enables the TI ADS7950 IIO driver. This is used on LEGO MINDSTORMS EV3. The other IIO configs removed in this patch are selected by CONFIG_TI_ADS7950, so they are not actually being desabled. Signed-off-by: David Lechner <david@lechnology.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2017-03-06ARM: omap2plus_defconfig: Enable support for ti-cpufreqDave Gerlach
AM335x, AM437x, DRA7xx, and AM57xx platforms all now depend on ti-cpufreq driver to enable proper OPPs for use with cpufreq, so enable the same. Signed-off-by: Dave Gerlach <d-gerlach@ti.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-03-06Merge tag 'v4.11-rc1' into omap-for-v4.11/fixesTony Lindgren
Linux 4.11-rc1
2017-03-06ARM: davinci_all_defconfig: enable IRQ support for pca953xBartosz Golaszewski
We need IRQs from the tca6416 expander for vpif capture to work on the da850-evm board. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2017-03-06ARM: davinci_all_defconfig: enable VPIF display modulesBartosz Golaszewski
Enable the VPIF display module and the video encoder present on the da850-evm UI board. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2017-03-06ARM: aspeed: Add CONFIG_SPI_ASPEED_SMCCédric Le Goater
Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Joel Stanley <joel@jms.id.au>
2017-03-06ARM: multi_v7_defconfig: Switch AXP20x driver from module to built-inRask Ingemann Lambertsen
The AXP20X regulator support is currently built as a module, which means it's not available until the root fs has been mounted, but the boot loader might not have enabled the required regulators, so build their drivers into the kernel. Signed-off-by: Rask Ingemann Lambertsen <rask@formelder.dk> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-03-06ARM: multi_v7_defconfig: Enable AC100 RTC driverRask Ingemann Lambertsen
Enable the AC100 RTC driver so boards with it can keep track of time. Signed-off-by: Rask Ingemann Lambertsen <rask@formelder.dk> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-03-06ARM: multi_v7_defconfig: Switch sunxi RSB driver from module to built-inRask Ingemann Lambertsen
The sunxi RSB bus is used for peripherals like voltage regulators and real-time clocks which should be available early in the boot process. As a module, the driver will not be available until the root fs has been mounted, so build the driver into the kernel. Signed-off-by: Rask Ingemann Lambertsen <rask@formelder.dk> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-03-06ARM: sunxi_defconfig: Enable AC100 RTC driverRask Ingemann Lambertsen
Enable the AC100 RTC driver so boards with it can keep track of time. Signed-off-by: Rask Ingemann Lambertsen <rask@formelder.dk> Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-03-02ARM: deconfig: fix the moxart defconfigLinus Walleij
The moxart defconfig wasn't even building a kernel for Moxart, it was building a kernel for V4T on the nothing platform. Switch to MULTI_V4 and keep the right drivers, update a few selections. Now it (presumably) builds a minimalist Moxart kernel again. Cc: Jonas Jensen <jonas.jensen@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2017-02-28ARM: omap2plus_defconfig: Enable INPUT_MOUSEDEV as loadable modulesTony Lindgren
Otherwise mice won't be happy. Signed-off-by: Tony Lindgren <tony@atomide.com>
generated by cgit (git 2.34.1) at 2024-05-14 06:00:15 +0000