| Age | Commit message (Collapse) | Author |
|---|
|
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
For the final round, avoid the expanded and padded lookup tables
exported by the generic AES driver. Instead, for encryption, we can
perform byte loads from the same table we used for the inner rounds,
which will still be hot in the caches. For decryption, use the inverse
AES Sbox directly, which is 4x smaller than the inverse lookup table
exported by the generic driver.
This should significantly reduce the Dcache footprint of our code,
which makes the code more robust against timing attacks. It does not
introduce any additional module dependencies, given that we already
rely on the core AES module for the shared key expansion routines.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Implement a NEON fallback for systems that do support NEON but have
no support for the optional 64x64->128 polynomial multiplication
instruction that is part of the ARMv8 Crypto Extensions. It is based
on the paper "Fast Software Polynomial Multiplication on ARM Processors
Using the NEON Engine" by Danilo Camara, Conrado Gouvea, Julio Lopez and
Ricardo Dahab (https://hal.inria.fr/hal-01506572)
On a 32-bit guest executing under KVM on a Cortex-A57, the new code is
not only 4x faster than the generic table based GHASH driver, it is also
time invariant. (Note that the existing vmull.p64 code is 16x faster on
this core).
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
There are quite a number of occurrences in the kernel of the pattern
if (dst != src)
memcpy(dst, src, walk.total % AES_BLOCK_SIZE);
crypto_xor(dst, final, walk.total % AES_BLOCK_SIZE);
or
crypto_xor(keystream, src, nbytes);
memcpy(dst, keystream, nbytes);
where crypto_xor() is preceded or followed by a memcpy() invocation
that is only there because crypto_xor() uses its output parameter as
one of the inputs. To avoid having to add new instances of this pattern
in the arm64 code, which will be refactored to implement non-SIMD
fallbacks, add an alternative implementation called crypto_xor_cpy(),
taking separate input and output arguments. This removes the need for
the separate memcpy().
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Make the module autoloadable by tying it to the CPU feature bits that
describe whether the optional instructions it relies on are implemented
by the current CPU.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Make the module autoloadable by tying it to the CPU feature bit that
describes whether the optional instructions it relies on are implemented
by the current CPU.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Make the module autoloadable by tying it to the CPU feature bit that
describes whether the optional instructions it relies on are implemented
by the current CPU.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Make the module autoloadable by tying it to the CPU feature bit that
describes whether the optional instructions it relies on are implemented
by the current CPU.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Make the module autoloadable by tying it to the CPU feature bit that
describes whether the optional instructions it relies on are implemented
by the current CPU.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Currently, the bit sliced NEON AES code for ARM has a link time
dependency on the scalar ARM asm implementation, which it uses as a
fallback to perform CBC encryption and the encryption of the initial
XTS tweak.
The bit sliced NEON code is both fast and time invariant, which makes
it a reasonable default on hardware that supports it. However, the
ARM asm code it pulls in is not time invariant, and due to the way it
is linked in, cannot be overridden by the new generic time invariant
driver. In fact, it will not be used at all, given that the ARM asm
code registers itself as a cipher with a priority that exceeds the
priority of the fixed time cipher.
So remove the link time dependency, and allocate the fallback cipher
via the crypto API. Note that this requires this driver's module_init
call to be replaced with late_initcall, so that the (possibly generic)
fallback cipher is guaranteed to be available when the builtin test
is performed at registration time.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The accelerated CRC32 module for ARM may use either the scalar CRC32
instructions, the NEON 64x64 to 128 bit polynomial multiplication
(vmull.p64) instruction, or both, depending on what the current CPU
supports.
However, this also requires support in binutils, and as it turns out,
versions of binutils exist that support the vmull.p64 instruction but
not the crc32 instructions.
So refactor the Makefile logic so that this module only gets built if
binutils has support for both.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Annotate a vmov instruction with an explicit element size of 32 bits.
This is inferred by recent toolchains, but apparently, older versions
need some help figuring this out.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The ARM bit sliced AES core code uses the IV buffer to pass the final
keystream block back to the glue code if the input is not a multiple of
the block size, so that the asm code does not have to deal with anything
except 16 byte blocks. This is done under the assumption that the outgoing
IV is meaningless anyway in this case, given that chaining is no longer
possible under these circumstances.
However, as it turns out, the CCM driver does expect the IV to retain
a value that is equal to the original IV except for the counter value,
and even interprets byte zero as a length indicator, which may result
in memory corruption if the IV is overwritten with something else.
So use a separate buffer to return the final keystream block.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Remove the unnecessary alignmask: it is much more efficient to deal with
the misalignment in the core algorithm than relying on the crypto API to
copy the data to a suitably aligned buffer.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Remove the unnecessary alignmask: it is much more efficient to deal with
the misalignment in the core algorithm than relying on the crypto API to
copy the data to a suitably aligned buffer.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The GNU assembler for ARM version 2.22 or older fails to infer the
element size from the vmov instructions, and aborts the build in
the following way;
.../aes-neonbs-core.S: Assembler messages:
.../aes-neonbs-core.S:817: Error: bad type for scalar -- `vmov q1h[1],r10'
.../aes-neonbs-core.S:817: Error: bad type for scalar -- `vmov q1h[0],r9'
.../aes-neonbs-core.S:817: Error: bad type for scalar -- `vmov q1l[1],r8'
.../aes-neonbs-core.S:817: Error: bad type for scalar -- `vmov q1l[0],r7'
.../aes-neonbs-core.S:818: Error: bad type for scalar -- `vmov q2h[1],r10'
.../aes-neonbs-core.S:818: Error: bad type for scalar -- `vmov q2h[0],r9'
.../aes-neonbs-core.S:818: Error: bad type for scalar -- `vmov q2l[1],r8'
.../aes-neonbs-core.S:818: Error: bad type for scalar -- `vmov q2l[0],r7'
Fix this by setting the element size explicitly, by replacing vmov with
vmov.32.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The ARMv8-M architecture introduces 'tt' and 'ttt' instructions,
which means we can no longer use 'tt' as a register alias on recent
versions of binutils for ARM. So replace the alias with 'ttab'.
Fixes: 81edb4262975 ("crypto: arm/aes - replace scalar AES cipher")
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This replaces the unwieldy generated implementation of bit-sliced AES
in CBC/CTR/XTS modes that originated in the OpenSSL project with a
new version that is heavily based on the OpenSSL implementation, but
has a number of advantages over the old version:
- it does not rely on the scalar AES cipher that also originated in the
OpenSSL project and contains redundant lookup tables and key schedule
generation routines (which we already have in crypto/aes_generic.)
- it uses the same expanded key schedule for encryption and decryption,
reducing the size of the per-key data structure by 1696 bytes
- it adds an implementation of AES in ECB mode, which can be wrapped by
other generic chaining mode implementations
- it moves the handling of corner cases that are non critical to performance
to the glue layer written in C
- it was written directly in assembler rather than generated from a Perl
script
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This replaces the scalar AES cipher that originates in the OpenSSL project
with a new implementation that is ~15% (*) faster (on modern cores), and
reuses the lookup tables and the key schedule generation routines from the
generic C implementation (which is usually compiled in anyway due to
networking and other subsystems depending on it).
Note that the bit sliced NEON code for AES still depends on the scalar cipher
that this patch replaces, so it is not removed entirely yet.
* On Cortex-A57, the performance increases from 17.0 to 14.9 cycles per byte
for 128-bit keys.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This is a straight port to ARM/NEON of the x86 SSE3 implementation
of the ChaCha20 stream cipher. It uses the new skcipher walksize
attribute to process the input in strides of 4x the block size.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This patch reverts the following commits:
8621caa0d45e731f2e9f5889ff5bb384fcd6e059
8096667273477e735b0072b11a6d617ccee45e5f
I should not have applied them because they had already been
obsoleted by a subsequent patch series. They also cause a build
failure because of the subsequent commit 9ae433bc79f9.
Fixes: 9ae433bc79f ("crypto: chacha20 - convert generic and...")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This is a straight port to ARM/NEON of the x86 SSE3 implementation
of the ChaCha20 stream cipher.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This is a combination of the the Intel algorithm implemented using SSE
and PCLMULQDQ instructions from arch/x86/crypto/crc32-pclmul_asm.S, and
the new CRC32 extensions introduced for both 32-bit and 64-bit ARM in
version 8 of the architecture. Two versions of the above combo are
provided, one for CRC32 and one for CRC32C.
The PMULL/NEON algorithm is faster, but operates on blocks of at least
64 bytes, and on multiples of 16 bytes only. For the remaining input,
or for all input on systems that lack the PMULL 64x64->128 instructions,
the CRC32 instructions will be used.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This is a transliteration of the Intel algorithm implemented
using SSE and PCLMULQDQ instructions that resides in the file
arch/x86/crypto/crct10dif-pcl-asm_64.S, but simplified to only
operate on buffers that are 16 byte aligned (but of any size)
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The variable aes_simd_algs should be static. In fact if it isn't
it causes build errors when multiple copies of aes-ce-glue.c are
built into the kernel.
Fixes: da40e7a4ba4d ("crypto: aes-ce - Convert to skcipher")
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The CBC encryption routine should use the encryption round keys, not
the decryption round keys.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This patch adds one more missing SIMD select for AES_ARM_BS. It
also changes selects on ALGAPI to BLKCIPHER.
Fixes: 211f41af534a ("crypto: aesbs - Convert to skcipher")
Reported-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The skcipher conversion for ARM missed the select on CRYPTO_SIMD,
causing build failures if SIMD was not otherwise enabled.
Fixes: da40e7a4ba4d ("crypto: aes-ce - Convert to skcipher")
Fixes: 211f41af534a ("crypto: aesbs - Convert to skcipher")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This patch converts aesbs over to the skcipher interface.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This patch converts aes-ce over to the skcipher interface.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The AES key schedule generation is mostly endian agnostic, with the
exception of the rotation and the incorporation of the round constant
at the start of each round. So implement a big endian specific version
of that part to make the whole routine big endian compatible.
Fixes: 86464859cc77 ("crypto: arm - AES in ECB/CBC/CTR/XTS modes using ARMv8 Crypto Extensions")
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Merge the crypto tree to pull in vmx ghash fix.
|
|
The AES-CTR glue code avoids calling into the blkcipher API for the
tail portion of the walk, by comparing the remainder of walk.nbytes
modulo AES_BLOCK_SIZE with the residual nbytes, and jumping straight
into the tail processing block if they are equal. This tail processing
block checks whether nbytes != 0, and does nothing otherwise.
However, in case of an allocation failure in the blkcipher layer, we
may enter this code with walk.nbytes == 0, while nbytes > 0. In this
case, we should not dereference the source and destination pointers,
since they may be NULL. So instead of checking for nbytes != 0, check
for (walk.nbytes % AES_BLOCK_SIZE) != 0, which implies the former in
non-error conditions.
Fixes: 86464859cc77 ("crypto: arm - AES in ECB/CBC/CTR/XTS modes using ARMv8 Crypto Extensions")
Cc: stable@vger.kernel.org
Reported-by: xiakaixu <xiakaixu@huawei.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The fact that the internal synchrous hash implementation is called
"ghash" like the publicly visible one is causing the testmgr code
to misidentify it as an algorithm that requires testing at boottime.
So rename it to "__ghash" to prevent this.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Since commit 8996eafdcbad ("crypto: ahash - ensure statesize is non-zero"),
all ahash drivers are required to implement import()/export(), and must have
a non-zero statesize. Fix this for the ARM Crypto Extensions GHASH
implementation.
Fixes: 8996eafdcbad ("crypto: ahash - ensure statesize is non-zero")
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The ARMv7 NEON module is explicitly built in ARM mode, which is not
supported by the Thumb2 kernel. So remove the explicit override, and
leave it up to the build environment to decide whether the core SHA1
routines are assembled as ARM or as Thumb2 code.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This patch fixes an old bug where requests can be reordered because
some are processed by cryptd while others are processed directly
in softirq context.
The fix is to always postpone to cryptd if there are currently
requests outstanding from the same tfm.
This patch also removes the redundant use of cryptd in the async
init function as init never touches the FPU.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto update from Herbert Xu:
"Here is the crypto update for 4.6:
API:
- Convert remaining crypto_hash users to shash or ahash, also convert
blkcipher/ablkcipher users to skcipher.
- Remove crypto_hash interface.
- Remove crypto_pcomp interface.
- Add crypto engine for async cipher drivers.
- Add akcipher documentation.
- Add skcipher documentation.
Algorithms:
- Rename crypto/crc32 to avoid name clash with lib/crc32.
- Fix bug in keywrap where we zero the wrong pointer.
Drivers:
- Support T5/M5, T7/M7 SPARC CPUs in n2 hwrng driver.
- Add PIC32 hwrng driver.
- Support BCM6368 in bcm63xx hwrng driver.
- Pack structs for 32-bit compat users in qat.
- Use crypto engine in omap-aes.
- Add support for sama5d2x SoCs in atmel-sha.
- Make atmel-sha available again.
- Make sahara hashing available again.
- Make ccp hashing available again.
- Make sha1-mb available again.
- Add support for multiple devices in ccp.
- Improve DMA performance in caam.
- Add hashing support to rockchip"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (116 commits)
crypto: qat - remove redundant arbiter configuration
crypto: ux500 - fix checks of error code returned by devm_ioremap_resource()
crypto: atmel - fix checks of error code returned by devm_ioremap_resource()
crypto: qat - Change the definition of icp_qat_uof_regtype
hwrng: exynos - use __maybe_unused to hide pm functions
crypto: ccp - Add abstraction for device-specific calls
crypto: ccp - CCP versioning support
crypto: ccp - Support for multiple CCPs
crypto: ccp - Remove check for x86 family and model
crypto: ccp - memset request context to zero during import
lib/mpi: use "static inline" instead of "extern inline"
lib/mpi: avoid assembler warning
hwrng: bcm63xx - fix non device tree compatibility
crypto: testmgr - allow rfc3686 aes-ctr variants in fips mode.
crypto: qat - The AE id should be less than the maximal AE number
lib/mpi: Endianness fix
crypto: rockchip - add hash support for crypto engine in rk3288
crypto: xts - fix compile errors
crypto: doc - add skcipher API documentation
crypto: doc - update AEAD AD handling
...
|
|
Commit 28856a9e52c7 missed the addition of the crypto/xts.h include file
for different architecture-specific AES implementations.
Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The patch centralizes the XTS key check logic into the service function
xts_check_key which is invoked from the different XTS implementations.
With this, the XTS implementations in ARM, ARM64, PPC and S390 have now
a sanity check for the XTS keys similar to the other arches.
In addition, this service function received a check to ensure that the
key != the tweak key which is mandated by FIPS 140-2 IG A.9. As the
check is not present in the standards defining XTS, it is only enforced
in FIPS mode of the kernel.
Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
ECB modes don't use an initialization vector. The kernel
/proc/crypto interface doesn't reflect this properly.
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
These files are generated since commits f2f770d74a8d (crypto: arm/sha256 - Add
optimized SHA-256/224, 2015-04-03) and c80ae7ca3726 (crypto: arm/sha512 -
accelerated SHA-512 using ARM generic ASM and NEON, 2015-05-08).
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This trims off a couple of instructions of the total size of the
core AES transform by reordering the final branch in the AES-192
code path with the rounds that are performed regardless of whether
the branch is taken or not. Other than the slight size reduction,
this has no performance benefit.
Fix up a comment regarding the prototype of this function while
we're at it.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This replaces the SHA-512 NEON module with the faster and more
versatile implementation from the OpenSSL project. It consists
of both a NEON and a generic ASM version of the core SHA-512
transform, where the NEON version reverts to the ASM version
when invoked in non-process context.
This patch is based on the OpenSSL upstream version b1a5d1c65208
of sha512-armv4.pl, which can be found here:
https://git.openssl.org/gitweb/?p=openssl.git;h=b1a5d1c65208
Performance relative to the generic implementation (measured
using tcrypt.ko mode=306 sec=1 running on a Cortex-A57 under
KVM):
input size block size asm neon old neon
16 16 1.39 2.54 2.21
64 16 1.32 2.33 2.09
64 64 1.38 2.53 2.19
256 16 1.31 2.28 2.06
256 64 1.38 2.54 2.25
256 256 1.40 2.77 2.39
1024 16 1.29 2.22 2.01
1024 256 1.40 2.82 2.45
1024 1024 1.41 2.93 2.53
2048 16 1.33 2.21 2.00
2048 256 1.40 2.84 2.46
2048 1024 1.41 2.96 2.55
2048 2048 1.41 2.98 2.56
4096 16 1.34 2.20 1.99
4096 256 1.40 2.84 2.46
4096 1024 1.41 2.97 2.56
4096 4096 1.41 3.01 2.58
8192 16 1.34 2.19 1.99
8192 256 1.40 2.85 2.47
8192 1024 1.41 2.98 2.56
8192 4096 1.41 2.71 2.59
8192 8192 1.51 3.51 2.69
Acked-by: Jussi Kivilinna <jussi.kivilinna@iki.fi>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Pull crypto update from Herbert Xu:
"Here is the crypto update for 4.1:
New interfaces:
- user-space interface for AEAD
- user-space interface for RNG (i.e., pseudo RNG)
New hashes:
- ARMv8 SHA1/256
- ARMv8 AES
- ARMv8 GHASH
- ARM assembler and NEON SHA256
- MIPS OCTEON SHA1/256/512
- MIPS img-hash SHA1/256 and MD5
- Power 8 VMX AES/CBC/CTR/GHASH
- PPC assembler AES, SHA1/256 and MD5
- Broadcom IPROC RNG driver
Cleanups/fixes:
- prevent internal helper algos from being exposed to user-space
- merge common code from assembly/C SHA implementations
- misc fixes"
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (169 commits)
crypto: arm - workaround for building with old binutils
crypto: arm/sha256 - avoid sha256 code on ARMv7-M
crypto: x86/sha512_ssse3 - move SHA-384/512 SSSE3 implementation to base layer
crypto: x86/sha256_ssse3 - move SHA-224/256 SSSE3 implementation to base layer
crypto: x86/sha1_ssse3 - move SHA-1 SSSE3 implementation to base layer
crypto: arm64/sha2-ce - move SHA-224/256 ARMv8 implementation to base layer
crypto: arm64/sha1-ce - move SHA-1 ARMv8 implementation to base layer
crypto: arm/sha2-ce - move SHA-224/256 ARMv8 implementation to base layer
crypto: arm/sha256 - move SHA-224/256 ASM/NEON implementation to base layer
crypto: arm/sha1-ce - move SHA-1 ARMv8 implementation to base layer
crypto: arm/sha1_neon - move SHA-1 NEON implementation to base layer
crypto: arm/sha1 - move SHA-1 ARM asm implementation to base layer
crypto: sha512-generic - move to generic glue implementation
crypto: sha256-generic - move to generic glue implementation
crypto: sha1-generic - move to generic glue implementation
crypto: sha512 - implement base layer for SHA-512
crypto: sha256 - implement base layer for SHA-256
crypto: sha1 - implement base layer for SHA-1
crypto: api - remove instance when test failed
crypto: api - Move alg ref count init to crypto_check_alg
...
|
|
Old versions of binutils (before 2.23) do not yet understand the
crypto-neon-fp-armv8 fpu instructions, and an attempt to build these
files results in a build failure:
arch/arm/crypto/aes-ce-core.S:133: Error: selected processor does not support ARM mode `vld1.8 {q10-q11},[ip]!'
arch/arm/crypto/aes-ce-core.S:133: Error: bad instruction `aese.8 q0,q8'
arch/arm/crypto/aes-ce-core.S:133: Error: bad instruction `aesmc.8 q0,q0'
arch/arm/crypto/aes-ce-core.S:133: Error: bad instruction `aese.8 q0,q9'
arch/arm/crypto/aes-ce-core.S:133: Error: bad instruction `aesmc.8 q0,q0'
Since the affected versions are still in widespread use, and this breaks
'allmodconfig' builds, we should try to at least get a successful kernel
build. Unfortunately, I could not come up with a way to make the Kconfig
symbol depend on the binutils version, which would be the nicest solution.
Instead, this patch uses the 'as-instr' Kbuild macro to find out whether
the support is present in the assembler, and otherwise emits a non-fatal
warning indicating which selected modules could not be built.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: http://storage.kernelci.org/next/next-20150410/arm-allmodconfig/build.log
Fixes: 864cbeed4ab22d ("crypto: arm - add support for SHA1 using ARMv8 Crypto Instructions")
[ard.biesheuvel:
- omit modules entirely instead of building empty ones if binutils is too old
- update commit log accordingly]
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The sha256 assembly implementation can deal with all architecture levels
from ARMv4 to ARMv7-A, but not with ARMv7-M. Enabling it in an
ARMv7-M kernel results in this build failure:
arm-linux-gnueabi-ld: error: arch/arm/crypto/sha256_glue.o: Conflicting architecture profiles M/A
arm-linux-gnueabi-ld: failed to merge target specific data of file arch/arm/crypto/sha256_glue.o
This adds a Kconfig dependency to prevent the code from being disabled
for ARMv7-M.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This removes all the boilerplate from the existing implementation,
and replaces it with calls into the base layer.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This removes all the boilerplate from the existing implementation,
and replaces it with calls into the base layer.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This removes all the boilerplate from the existing implementation,
and replaces it with calls into the base layer.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
